RESEARCH OF THE DYNAMIC CHARACTERISTICS ON A NEW HYDRAULIC SYSTEM OF ELECTRO-HYDRAULIC HAMMER 被引量：9

RESEARCH OF THE DYNAMIC CHARACTERISTICS ON A NEW HYDRAULIC SYSTEM OF ELECTRO-HYDRAULIC HAMMER

下载PDF

导出

摘要 A new typed hydraulic system of electro hydraulic hammer is researched and developed By means of power bond graphs the modeling and simulation to the dynamic characteristics of the new hydraulic system are performed The experimental research which is emphasized on the blowing stroke is also performed It is proved from the result of simulation and experiment that this new hydraulic system possesses such advantages as simplification of structure,flexibleness of operation and reliability of working Especially it possesses better dynamic characteristics A new typed hydraulic system of electro hydraulic hammer is researched and developed By means of power bond graphs the modeling and simulation to the dynamic characteristics of the new hydraulic system are performed The experimental research which is emphasized on the blowing stroke is also performed It is proved from the result of simulation and experiment that this new hydraulic system possesses such advantages as simplification of structure,flexibleness of operation and reliability of working Especially it possesses better dynamic characteristics

作者 Li Yongtang Lei Bufang Department of Mechanical Engineering,Taiyuan Heavy Machinery Institute Shi Enxiu Xi’an University of Science and Technology

出处《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2001年第2期171-174,共4页 中国机械工程学报（英文版）

基金 ProvincialNaturalScience FoundationofShanxi(No 199910 6 2 )

关键词 ELECTRO hydraulic hammer Hydraulic system Dynamic characteristics SIMULATION Electro hydraulic hammer Hydraulic system Dynamic characteristics Simulation

分类号 TG315.3 [金属学及工艺—金属压力加工]

引文网络
相关文献

参考文献3

1[1]Xia Shide,He Ming. Electro-hydraulic hammer head which is used for transforming steam hammer. Forging Equipment,1993,28(1)∶4～7
2[2]Li Yongtang,Yang Shaojing.15 kJ arm-suspended electrohydraulic forging hammer. Forging Equipment,1996,31(3)∶20～23
3[3]Lei Bufang,Li Yongtang. Research on the energy economization of electro-hydraulic hammer. Chinese Journal of Mechanical Engineering,2000,13(1)∶64～69

同被引文献73

1严侠,朱长春,胡勇.三轴六自由度液压振动台系统建模研究[J].机床与液压,2006,34(11):93-95. 被引量：11
2罗铭,杨襄璧.液压锤(冲击器)的结构特征与技术进步[J].中国工程机械学报,2005,3(3):311-315. 被引量：7
3任良成,林程,陈思忠.六自由度摇摆台的机电液一体化仿真研究[J].液压与气动,2004,28(11):30-32. 被引量：5
4孟凡武,贺鸣,胡大勇.电液锤液压系统的压力控制方式[J].锻压装备与制造技术,2005,40(1):46-48. 被引量：4
5许同乐.液压锤仿真软件的研究[J].建筑机械,2006,26(01S):73-76. 被引量：1
6黄其涛,韩俊伟,何景峰.六自由度并联运动平台动力学建模及分析[J].机械科学与技术,2006,25(4):382-385. 被引量：19
7刘海丽,李华聪.液压机械系统建模仿真软件AMESim及其应用[J].机床与液压,2006,34(6):124-126. 被引量：100
8陈丁跃.光学精密航天仪器运载中的环境振动试验研究[J].仪器仪表学报,2006,27(7):711-714. 被引量：6
9邓习树,吴运新,李建平.微制造隔振平台的ADAMS和MATLAB联合仿真研究[J].机床与液压,2006,34(9):206-208. 被引量：11
10DONG Yu-hong.THE NONLINEAR BEHAVIOR OF INTERFACE BETWEEN TWO-PHASE SHEAR FLOW WITH LARGE DENSITY RATIOS[J].Journal of Hydrodynamics,2006,18(5):587-592. 被引量：3

引证文献9

1毛正平,李永堂,白墅洁.机械系统典型运动过程单片机控制与数字仿真[J].仪器仪表学报,2006,27(z3):1883-1884.
2毛正平,李永堂,白墅洁.机械系统典型运动过程动态分析与数字仿真[J].机械工程与自动化,2006(5):6-9. 被引量：1
3CHEN Hui,LI Sheng-cai,ZUO Zhi-gang,LI Shuai.DIRECT NUMERICAL SIMUIATION OF BUBBLE-CLUSTER’S DYNAMIC CHARACTERISTICS[J].Journal of Hydrodynamics,2008,20(6):689-695. 被引量：7
4ZUO Zhi-gang,LI Sheng-cai,LIU Shu-hong,LI Shuang,CHEN Hui.AN ATTRIBUTION OF CAVITATION RESONANCE:VOLUMETRIC OSCILLATIONS OF CLOUD[J].Journal of Hydrodynamics,2009,21(2):152-158. 被引量：2
5丁问司,黄晓东.氮爆式液压冲击器的仿真建模[J].华南理工大学学报（自然科学版）,2010,38(2):90-94. 被引量：11
6丁问司,汪娇娇.阀控双相交流液压振动系统特性研究[J].液压与气动,2010,34(8):43-46.
7韦金磊,田洋,陈建军,徐铁伟,尔洪川,侯俊民.液压打桩锤行程传感器故障分析和处理[J].全国商情,2012(04X):94-94. 被引量：1
8周晓君,夏麟.基于AMESim的井下全液压抽油系统的建模与仿真[J].液压气动与密封,2013,33(10):37-39. 被引量：1
9凌明祥,杨奇,朱长春,韩宇航,王珏.电液伺服振动台动力学建模与仿真研究进展[J].机床与液压,2013,41(21):153-159. 被引量：3

二级引证文献26

1栾丽君,刘玉刚,刘威.串联盘管道连续输送机串联盘的优化设计[J].煤矿机械,2007,28(11):27-29. 被引量：1
2WANG Han,ZHANG Zhen-yu,YANG Yong-ming,ZHANG Hui-sheng.VISCOSITY EFFECTS ON THE BEHAVIOR OF A RISING BUBBLE[J].Journal of Hydrodynamics,2010,22(1):81-89. 被引量：7
3黄彪,王国玉,袁海涛,陈广豪.绕轴对称体三维非定常空化流动的数值与实验研究[J].水动力学研究与进展（A辑）,2010,25(6):837-844. 被引量：1
4HUANG Biao WANG Guo-yu.PARTIALLY AVERAGED NAVIER-STOKES METHOD FOR TIME-DEPENDENT TURBULENT CAVITATING FLOWS[J].Journal of Hydrodynamics,2011,23(1):26-33. 被引量：14
5WANG Han,ZHANG Zhen-yu,YANG Yong-ming,ZHANG Hui-sheng.SURFACE TENSION EFFECTS ON THE BEHAVIOR OF TWO RISING BUBBLES[J].Journal of Hydrodynamics,2011,23(2):135-144. 被引量：2
6WANG Jing-yi,ZOU Jian-feng,ZHENG Yao,REN An-lu.MARCHING CUBES BASED FRONT TRACKING METHOD AND ITS APPLICATION TO SOME INTERFACE INSTABILITY PROBLEMS[J].Journal of Hydrodynamics,2011,23(5):580-588.
7Zhang-Rui Li,Lei Sun,Zhi Zong,Jing Dong.A boundary element method for the simulation of non-spherical bubbles and their interactions near a free surface[J].Acta Mechanica Sinica,2012,28(1):51-65. 被引量：6
8张凌新,尹琴,邵雪明.水中气泡溃灭的理论与数值研究[J].水动力学研究与进展（A辑）,2012,27(1):68-73. 被引量：22
9ZHANG Yu-ning LI Sheng-cai.EFFECTS OF LIQUID COMPRESSIBILITY ON RADIAL OSCILLATIONS OF GAS BUBBLES IN LIQUIDS[J].Journal of Hydrodynamics,2012,24(5):760-766. 被引量：3
10彭峰,高贵军.基于氮气室的液压冲击器理论分析与实验研究[J].机床与液压,2014,42(13):64-66.

1Lei Bufang ,Li Yongtang,Liu Jiansheng (Department of Mechanical Engineering, Taiyuan Heavy Machinery Institute).RESEARCH ON THE ENERGY ECONOMIZATION OF ELECTRO-HYDRAULIC HAMMER[J].Chinese Journal of Mechanical Engineering,2000,13(1):54-69. 被引量：10
2Zhong-xiu FEI,Shui-guang TONG,Chao WEI.Investigation of the dynamic characteristics of a dual rotor system and its start-up simulation based on finite element method[J].Journal of Zhejiang University-Science A(Applied Physics & Engineering),2013,14(4):268-280. 被引量：21
3刘庆明,庞志成.Investigation of the Dynamic Characteristics of a Rotor Bearing Assembly[J].Journal of Harbin Institute of Technology(New Series),1995,2(1):67-71.
4CAI Maolin XU Weiqing.Self-sustained Oscillation Pulsed Air Blowing System for Energy Saving[J].Chinese Journal of Mechanical Engineering,2010,23(3):317-326. 被引量：2
5郝鹏飞,张锡文,王学芳.Dynamic Characteristics of a New Pneumatic Cylinder with Curved Groove[J].Tsinghua Science and Technology,2000,5(1):60-63.
6Chen Anhua, Liao Chuanjun, Li Xuejun(Key Lab of Health Maintenance for Mechanical Equipment of Hunan Province, Hunan Science and Technology University, Xiangtan, Hunan 411201).Experimental Research on Resonance Response Differences of the Rotor System with Sliding and Rolling Bearings[J].工程科学（英文版）,2007,5(2):161-167.
7Yang Yun Wang Zheng Department of Engineering Mechanics, Qinghua University Kim Lock Song Institute of Biophysics, Chinese Academy of Sciences.CALCULATION AND IMPROVEMENT OF DYNAMIC CHARACTERISTICS OF CENTRIFUGE[J].Chinese Journal of Mechanical Engineering,2001,14(1):32-35.
8Cheng Jihua,Fan Yuqing(School of Mechanical Engineering & Automation,Beijing University of Aeronautics & Astronautics, Beijing 100083, PRC).Simplifying Triangular Mesh Model by Modified Distance Criterion[J].Computer Aided Drafting,Design and Manufacturing,1999,9(1):52-58.
9Xue-Dong Chen,Jin-Cheng Zhu,Han ChenState.Dynamic characteristics of ultra-precision aerostatic bearings[J].Advances in Manufacturing,2013,1(1):82-86. 被引量：22
10王立新,WU Shuang-ma,LIU Jun-hui.The effect of the planet's number on dynamic characteristics of planetary gear systems[J].Journal of Chongqing University,2016,15(3):103-110.

Chinese Journal of Mechanical Engineering

2001年第2期

浏览历史

内容加载中请稍等...

RESEARCH OF THE DYNAMIC CHARACTERISTICS ON A NEW HYDRAULIC SYSTEM OF ELECTRO-HYDRAULIC HAMMER 被引量：9

参考文献3

同被引文献73

引证文献9

二级引证文献26

相关作者

相关机构

相关主题

浏览历史