摘要
针对目前催化裂化提升管反应器后半段催化剂性能严重下降以及产品分布不太合理的状况 ,提出了采用两段提升管催化裂化新工艺技术取代常规的单段提升管催化裂化工艺技术 该工艺的突出特征是催化剂接力、分段反应、大剂油比和短反应时间 在对新工艺进行理论分析的基础上 ,以大庆蜡油掺兑 6 5 %渣油为原料 ,采用ZC 730 0催化剂 ,在小型提升管催化裂化装置上进行了一系列实验 ,考察两段提升管催化裂化 (Ⅰ型 )新工艺的可行性和先进性 实验结果表明 :与常规单段工艺相比 ,在相近转化率下 ,两段柴油产率提高 6～ 8个百分点 ,轻油产率提高 1～ 2个百分点 ;汽油烯烃含量减少 ,辛烷值提高 ,产品质量提高
In this paper,the two stage riser fluidized catalytic cracking technology (TSRFCC) is proposed aiming at improving the performance and overcoming the disadvantages of the ordinary one stage riser FCC technology (OSRFCC).The distinct features of TSRFCC are attributed to catalyst relay and sub section reaction Daqing VGO mixed by 65% VR as feedstock and ZC 7300 catalyst were used to test the feasibility and superiority of the TSRFCC technology.A series of experiments were carried out in a pilot unit.By analyzing the abundant experimental data,the following conclusions can be reached: compared to OSRFCC technology, in the condition of similar conversion of heavy oil feedstock, TSRFCC can increase diesel oil yield by 6—8 percentage point, and light oil yield by 1—2 percentage point.Gasoline octane number also increases TSRFCC shows the great potential and superiority in increasing diesel oil yield and improving product distribution and quality.
出处
《化工学报》
EI
CAS
CSCD
北大核心
2004年第6期919-923,共5页
CIESC Journal
关键词
流化催化裂化
反应器
两段提升管
柴油收率
产品分布
产品质量
fluidized catalytic cracking,reactor, two-stage riser, diesel yield, product distribution, product quality
