期刊文献+

一种小型冷榨机的开发 被引量:7

Development of cold-pressing expeller with small capacity
在线阅读 下载PDF
导出
摘要 为了开发适于双低油菜籽脱皮冷榨的螺旋榨油机 ,在大量实验研究的基础上 ,设计并研制了一种新颖的小型双阶多级压榨的冷榨机。通过对该机的性能实验 ,结果表明未经预处理的脱皮菜籽仁 (水分 6 .3% ;湿基含油 4 4.7% )的油脂提取率为 85 %以上 ,干饼残油率为 10 .8% ,榨笼的最高温度为 6 0 .5℃。而且 ,在喂料段通过增大输送螺旋的封料长度 ,设置带阻转槽的衬套成功地解决了这种高油、低粗纤维含量的软油料的输送 ,无需专门的强制喂料装置。 In order to develop a screw press for cold pressing de hulled double low rapeseed, a small capacity double stair and multiple stage compression screw press for cold expressing was designed and constructed based on numerous tests.The results on the press show that the oil yield efficiency for de hulled rapeseed kernel(wt,6.3%; oil,44.7%)without pretreatments is 85%, dry cake residual oil rate is 10.8%,and the maximum barrel temperature is 60.5℃.Furthermore,the feeding zone having an enough covering length of grooved bushing work successfully out transport of the special soft oilseed with high oil content and low crude fiber content without other forced feeding sets. The developed expeller could profitably be used for small-scale processing of rapeseed and other special oilseed in rural areas of China.
出处 《中国油脂》 CAS CSCD 北大核心 2004年第6期20-23,共4页 China Oils and Fats
关键词 双低油菜籽 螺旋榨油机 冷榨机 脱皮菜籽仁 带阻转槽 输送螺旋 封料长度 double-low rapeseed de-hulled rapeseed kernel screw press cold-pressing expeller
  • 相关文献

参考文献16

  • 1Ohlson I S R.Modem processing of rapeseed [ J ].J.Am.Oil Chem.Soc.,1992,69:195-198.
  • 2Hui Y H.Bailey's Industrial Oil & Fat Products[M].NJ:John Wiley & Sons,Inc.1996.
  • 3Tindale L H,Hill-Haas S R.Current equipment for mechani cai oil extraction[J].J.Am.Oil Chem.Soc.,1976,53(6):265-270.
  • 4Bredeson D K.Mechanical oil extraction[J] .J.Am.Oil Chem Soc.,1983,60:211-213.
  • 5Khan L M,Hanna M A.Expression of oil from oilseeds:a review[J] .Journal of Agricultural Engineering Research,1983,28(6):498-503.
  • 6Isobe S,Zuber F,Uemura K,et al.A new twin-screw press design for oil extraction of dehulled sunflower seeds[ J].J.Am.Oil Chem.Soc.,1992,69:884-889.
  • 7胡健华,韦一良.优质资源双低油菜籽[J].武汉工业学院学报,2002,21(3):1-3. 被引量:8
  • 8杨经泽.双低油菜高产途径与高产保优栽培技术[C]..武汉:2002UNDP双低油菜国际技术研讨会论文集[C].,2002..
  • 9黄凤洪.双低油菜籽高效加工与多层次增值技术[J].中国油脂,2002,27(6):9-11. 被引量:21
  • 10王汉中.入世后的中国油菜产业[C]..武汉:2002UNDP双低油菜国际技术研讨会论文集[C].,2002..

二级参考文献27

  • 1钱和,雕鸿荪,沈培英.油菜籽饼粕脱毒方法的评述与研究现状[J].江苏食品与发酵,1994(2):16-24. 被引量:8
  • 2张麟,宋新毛,张小燕.油菜籽脱皮机的试验研究[J].粮油加工(电子版),1997(1):5-6. 被引量:10
  • 3谢文磊 刘景顺.油脂工业副产品综合利用[M].北京:中国财政经济出版社,1988..
  • 4王道顺.菜籽饼粕开发研究与推广应用[J].粮食与饲料工业,1987,4:39-44.
  • 5Y.H.Hui 徐生庚等(译).贝雷:油脂化学与工艺学,第五版[M].北京:中国轻工业出版社,2001..
  • 6傅廷栋.油菜生产、研究的现状与展望[A]..中国优质油菜发展论坛文集[C].湖北荆州,2002..
  • 7[1] Rasehorn, Bartels u.a.Technische Loesungen zur Schael ung von Oelsaaten[J].Fat. Sci. Technol,1991,93(1):35-37
  • 8[2] Prof. Dr. Felix H. Schneider, Michael Rass. Trennpressen geschael ter Rapssaat-Zielsetzung und verfahrenstechnische Problem[J].Fett/Lipid,1997 ,99(3):91-98
  • 9[3] Michael Rass, Prof. Dr. Felix H. Schneider.Trennpressen geschael ter Rapssaat-Rheologische Eingenschaften des Linear gepressten Feststoffbettes[ J].Fett/Lipid,1997,99(57):174-185
  • 10[4] Hans-Dieter Deicke.Schaelung von Raps,Versrbeitung und Qualitaets verbesserungen der anfallenden Produkte[M]. unveroeffentlichter Vortrag anlae sslich der CMA-Tagung,1997 in Kassel

共引文献141

同被引文献51

引证文献7

二级引证文献40

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部