The effect of homogenization treatment on the corrosion behavior and corrosion mechanism of Mg-Y alloys in 3.5 wt% NaCl solution was investigated by electrochemical characterization, immersion testing and SEM observat...The effect of homogenization treatment on the corrosion behavior and corrosion mechanism of Mg-Y alloys in 3.5 wt% NaCl solution was investigated by electrochemical characterization, immersion testing and SEM observations. The diffusion kinetics model of Mg-Y alloy was established, and the homogenization system was determined. With increasing of homogenization temperature and time, the Mg24Y5 phase gradually decreased, which increased the self-corrosion potential and the high-frequency arc radius. The corrosion resistance of the five alloys could be given as follow: Mg-0.25Y < Mg-8Y < Mg-15Y < Mg-5Y < Mg-2.5Y. The Mg- (0.25, 2.5 and 5) Y show localized corrosion in a wide range and small depth, while Mg- (8 and 15) Y showed localized corrosion in a smaller range and larger depth.展开更多
The Al-Cu wheel adopting the new Al alloy was prepared by the liquid-die forging,and the mechanical properties,composition distribution,microstructure and fracture behavior were investigated.The results showed that se...The Al-Cu wheel adopting the new Al alloy was prepared by the liquid-die forging,and the mechanical properties,composition distribution,microstructure and fracture behavior were investigated.The results showed that serious Cu segregation was found in the wheel specimen;the microstructure of the Al-Cu wheel was comprised of the casting microstructure and a small amount of the deformed microstructure;the best heat treatment and water quenching system were found to solution treated at(530±5)℃ for 4 h followed by(535±5)℃ for 24 h and aging treated at(155±5)℃ for 4 h;the fracture morphologies of the samples heated under T 6 and T 5-1 heat treatment showed flat,tough nest,and poor plastic characteristics;the fracture morphologies of the samples heated under T 4 heat treatment exhibited complete resilience,but no residual metallographic characteristic;the sample treated under T 4 protocol had the best elongation;the fracture failure was mainly due to the formation of the CuAl_(2)(θ)phases;and the fracture mechanism of the Al-Cu wheel was intergranular fracture.展开更多
基金Funded by the National Key Technologies R&D Program of China (No.2019YFC1511405)the National Science and Technology Support Program of China (No.2011BAE22B06)
文摘The effect of homogenization treatment on the corrosion behavior and corrosion mechanism of Mg-Y alloys in 3.5 wt% NaCl solution was investigated by electrochemical characterization, immersion testing and SEM observations. The diffusion kinetics model of Mg-Y alloy was established, and the homogenization system was determined. With increasing of homogenization temperature and time, the Mg24Y5 phase gradually decreased, which increased the self-corrosion potential and the high-frequency arc radius. The corrosion resistance of the five alloys could be given as follow: Mg-0.25Y < Mg-8Y < Mg-15Y < Mg-5Y < Mg-2.5Y. The Mg- (0.25, 2.5 and 5) Y show localized corrosion in a wide range and small depth, while Mg- (8 and 15) Y showed localized corrosion in a smaller range and larger depth.
基金Project(2019 YFC 1511400)supported by the National Key Technologies R&D Program of China。
文摘The Al-Cu wheel adopting the new Al alloy was prepared by the liquid-die forging,and the mechanical properties,composition distribution,microstructure and fracture behavior were investigated.The results showed that serious Cu segregation was found in the wheel specimen;the microstructure of the Al-Cu wheel was comprised of the casting microstructure and a small amount of the deformed microstructure;the best heat treatment and water quenching system were found to solution treated at(530±5)℃ for 4 h followed by(535±5)℃ for 24 h and aging treated at(155±5)℃ for 4 h;the fracture morphologies of the samples heated under T 6 and T 5-1 heat treatment showed flat,tough nest,and poor plastic characteristics;the fracture morphologies of the samples heated under T 4 heat treatment exhibited complete resilience,but no residual metallographic characteristic;the sample treated under T 4 protocol had the best elongation;the fracture failure was mainly due to the formation of the CuAl_(2)(θ)phases;and the fracture mechanism of the Al-Cu wheel was intergranular fracture.
