The current linear economy assumes abundant,easily accessible,and cost-effective natural resources.However,this assumption is unsustainable,especially considering the world’s current trajectory exceeding the Earth’s...The current linear economy assumes abundant,easily accessible,and cost-effective natural resources.However,this assumption is unsustainable,especially considering the world’s current trajectory exceeding the Earth’s ecological limits.In contrast,circular economy(CE)reduces wastes and improves resource efficiency,making them a more sustainable alternative to the dominant linear model.Biomass energy generated from agricultural leftovers,forestry wastes,and municipal trash provides a renewable substitute for fossil fuels.This reduces greenhouse gas emissions and improves energy security.Proper waste management,including trash reduction,recycling,and innovative waste-to-energy technology,reduces the burden on landfills and incineration and creates renewable energy from materials that would otherwise go to waste.Although integrating these techniques is consistent with the CE’s resource efficiency and waste minimization principles,it requires addressing environmental,technical,and socioeconomic challenges.Given the pressing global issues,transitioning to a CE and implementing sustainable environmental practices are crucial to mitigate the current waste management crisis.The aim of this study is to emphasize the viability of biomass as a source of sustainable energy,the necessity of comprehensive strategies that prioritize ecological sustainability,community involvement,and innovation to achieve a circular principle based future,and the potential obstacles to the implementation of sustainable environmental practices.This study will aid in implementing CE practices to accomplish the Sustainable Development Goals(SDGs)by reducing greenhouse gas emissions and landfill loads.Beyond environmental benefits,it can also bring economic,social,and health improvements.Furthermore,this study will assist societies in addressing global issues,such as resource scarcity,pollution,and climate change,as well as transitioning to a more sustainable and resilient future.展开更多
Accumulating operational experience in both aerobic and anaerobic mechanical biological waste treatment （MBT） makes it increasingly obvious that controlled water management would substantially reduce the cost of MBT...Accumulating operational experience in both aerobic and anaerobic mechanical biological waste treatment （MBT） makes it increasingly obvious that controlled water management would substantially reduce the cost of MBT and also enhance resource recovery of the organic and inorganic fraction. The MBT plant at Gescher, Germany, is used as an example in order to determine the quantity and composition of process water and leachates from intensive and subsequent rotting, pressing water from anaerobic digestion and scrubber water from acid exhaust air treatment, and hence prepare an MBT water balance. The potential of, requirements for and limits to internal process water reuse as well as the possibilities of resource recovery from scrubber water are also examined. Finally, an assimilated process water management concept with the purpose of an extensive reduction of wastewater quantity and freshwater demand is presented.展开更多
Iron and steel industry is one of the main sources of air pollution emissions in China.The sintering process is an important link in the blast furnace ironmaking process,but it is also accompanied by a large number of...Iron and steel industry is one of the main sources of air pollution emissions in China.The sintering process is an important link in the blast furnace ironmaking process,but it is also accompanied by a large number of pollutants.Under the background of ultra-low emissions,iron and steel enterprises urgently need to upgrade their existing processes to address the existing process in practical application problems.In this study,a steel group in Gansu Province was taken as an example.By comparing and analyzing the pollutant emission characteristics before and after the ultra-low emission retrofit,the collaborative control effect of the combined process on SO_(2),NO_(x),particulate matter,and dioxins after the new retrofit was systematically evaluated.The results show that after the retrofit,the concentrations of particulate matter,SO_(2) and NO_(x) have dropped to near-zero levels,and the dioxin removal efficiency has reached 98.87%,with all indicators being better than the national ultra-low emission standards.The study confirms that the optimal combination of multi-pollutant collaborative treatment technologies is the key to achieving efficient emission reduction,among which selective catalytic reduction technology has a particularly significant synergistic removal effect on NO_(x) and dioxins.This study provides an important technical reference and practical basis for the ultra-low emission retrofit of the steel industry,and has important guiding significance for promoting the green retrofit of the industry.Its ultra-low emission retrofit is of great significance for achieving green and low-carbon development.展开更多
Green macroalga Caulerpa lentillifera was found to have reasonable adsorption capacity for basic dyes, Astrazon Blue FGRL （AB）, Astrazon Red GTLN （AR）, and Astrazon Golden Yellow GL-E （AY）. The initial dye conce...Green macroalga Caulerpa lentillifera was found to have reasonable adsorption capacity for basic dyes, Astrazon Blue FGRL （AB）, Astrazon Red GTLN （AR）, and Astrazon Golden Yellow GL-E （AY）. The initial dye concentration was in the range of 100-1,800 mg/L. The dried algal sorbent was ground and sieved into 3 sizes： S （0.1-0.84 mm）, M （0.84-2.0 mm）, and L sizes （larger than 2.0 mm）. For all conditions examined in this work （at 25℃ in batch systems）, the adsorption reached equilibrium within the first hour. The kinetic data corresponded well with the pseudo second order kinetic model where the rate constant, k2, decreased as the sorbent size increased for all dyes. The adsorption isotherms followed both Langmuir and Freundlich models. Among three sorbent sizes, S size gave the highest adsorption capacity followed by M and L sizes. A reduction of sorbent size increased the specific surface area for mass transfer, and also increased the total pore volume, thus providing more active sites for adsorption. The adsorption of AB was adversely influenced by the protonation of algal surface at low pH. On the other hand, the adsorption of AR and AY could be due to weak electrostatic interaction, which was not significantly affected by pH. Increasing salinity of the system caused a decrease in adsorption capacity possibly due to the competition between Na^＋ and the dye cations for the binding sites on algal surface. Moreover, an increase in salinity generated a compressed electrical double layer on the algal surface which exerted repulsive force, retarding the adsorption of positive charged molecules such as the basic dyes.展开更多
The production of polyhydroxyalkanoates(PHA) from wastewaters using microbial mixed cultures(MMC) has been attracting increased interest because of PHA's biodegradability characteristics. Production of PHA by an M...The production of polyhydroxyalkanoates(PHA) from wastewaters using microbial mixed cultures(MMC) has been attracting increased interest because of PHA's biodegradability characteristics. Production of PHA by an MMC enriched with PHA-accumulating bacteria was compared using anaerobically treated and acidified brewery wastewaters under various feeding strategies, namely pulse and batch feed addition. To obtain an enriched MMC, a sequencing batch reactor was inoculated with activated sludge fed with acetate and subjected to aerobic dynamic feeding. The enriched MMC was able to accumulate PHA up to 72.6% of cell dry weight(CDW) with pulse addition of acetate controlled by the dissolved oxygen(DO) concentration in the reactor. In a batch accumulation experiment with acetate,the PHA content achieved(28.5% CDW) was less than that of the pulse feeding strategy with the same amount of acetate(～2000 mg C/L). Using anaerobically treated and acidified brewery wastewater fed in pulses, the maximum PHA accumulated by the enriched MMC was similar for both wastewaters(45% CDW), in spite of the higher volatile fatty acid concentration in acidified brewery wastewater. The pulse feed addition controlled by the DO concentration was difficult to implement for wastewater as compared to acetate because the difference in DO concentration between substrate availability and depletion was low. For the batch addition of acidified wastewater, a slightly lower PHA content(39%CDW) was obtained. These results show that both brewery wastewaters can be utilized for PHA production with a similar maximum PHA storage capacity.展开更多
The influence of CO2 content and presence of SO2 on the sequestration of CO2 by municipal solid waste incinerator （MSWI） fly ash was studied by investigating the carbonation reaction of MSWI fly ash with different c...The influence of CO2 content and presence of SO2 on the sequestration of CO2 by municipal solid waste incinerator （MSWI） fly ash was studied by investigating the carbonation reaction of MSWI fly ash with different combinations of simulated flue gas. The reaction between fly ash and 100% CO2 was relatively fast; the uptake of CO2 reached 87 g CO2/kg ash, and the sequestered CO2 could be entirely released at high temperatures. When CO2 content was reduced to 12%, the reaction rate decreased; the uptake fell to 41 g CO2/kg ash, and 70.7% of the sequestered CO2 could be released. With 12% CO2 in the presence of SO2, the reaction rate significantly decreased; the uptake was just 17 g CO2/kg ash, and only 52.9% of the sequestered CO2 could be released. SO2 in the simulated gas restricted the ability of fly ash to sequester CO2 because it blocked the pores of the ash.展开更多
The maximum specific methanogenic activity （SMA） of a sludge originating from a brewery wastewater treatment plant on the degradation of glucose was investigated at various levels of sulfate on a specific loading ba...The maximum specific methanogenic activity （SMA） of a sludge originating from a brewery wastewater treatment plant on the degradation of glucose was investigated at various levels of sulfate on a specific loading basis. Batch experiments were conducted in serum bottles at pH 7 and 35℃. A comparison of the values indicates that the SMA of this mixed culture was increased and reached its highest level of 0.128 g CH4 gas COD/（g VSS.d） when biomass was in contact with sulfate at a ratio of 1：0.114 by weight.展开更多
Food waste treatment plants （FWTPs） are usually associated with odorous nuisance and health risks, which are partially caused by volatile organic compound （VOC） emissions. This study investigated the VOC emissions...Food waste treatment plants （FWTPs） are usually associated with odorous nuisance and health risks, which are partially caused by volatile organic compound （VOC） emissions. This study investigated the VOC emissions from a selected full-scale FWTP in China. The feedstock used in this plant was mainly collected from local restaurants. For a year, the FWTP was closely monitored on specific days in each season. Four major indoor treatment units of the plant, including the storage room, sorting/crushing room, hydrothermal hydrolysis unit, and aerobic fermentation unit, were chosen as the monitoring locations. The highest mean concentration of total VOC emissions was observed in the aerobic fermentation unit at 21,748.2-31,283.3 μg/m^3, followed by the hydrothermal hydrolysis unit at 10,798.1-23,144.4 μg/m^3. The detected VOC families included biogenic compounds （oxygenated compounds, hydrocarbons, terpenes, and organosulfur compounds） and abiogenic compounds （aromatic hydrocarbons and halocarbons）. Oxygenated compounds, particularly alcohols, were the most abundant compounds in all samples. With the use of odor index analysis and principal components analysis, the hydrothermal hydrolysis and aerobic fermentation units were clearly distinguished from the pre-treatment units, as characterized by their higher contributions to odorous nuisance. Methanthiol was the dominant odorant in the hydrothermal hydrolysis unit, whereas aldehyde was the dominant odorant in the aerobic fermentation unit. Terpenes, specifically limonene, had the highest level of propylene equivalent concentration during the monitoring periods. This concentration can contribute to the increase in the atmospheric reactivity and ozone formation potential in the surrounding air.展开更多
The properties of a Lanthanum bromide(LaBr3)detector and its response functions were investigated via experiments and simulations in this paper.The LaBr3detector had good relative energy resolution and higher efficien...The properties of a Lanthanum bromide(LaBr3)detector and its response functions were investigated via experiments and simulations in this paper.The LaBr3detector had good relative energy resolution and higher efficiency than a high-purity germanium detector.Monte Carlo and other numerical methods were used to calculate the efficiencies of a LaBr3detector with a square collimation window.A model of the numerical method was established based on a pure geometric model that was consistent with the experimental situation.The results showed that the detector response functions calculated by these methods were in great agreement with experimental results.展开更多
Strength development, leachability and microstructure of heavy metals from the solidified waste using synthesis rice husk ash （sRHA） and lime blended at the weight ratio of 1：1 were used as binders. The heavy metal...Strength development, leachability and microstructure of heavy metals from the solidified waste using synthesis rice husk ash （sRHA） and lime blended at the weight ratio of 1：1 were used as binders. The heavy metal-containing sludge was used at the level of 0 wt.%, 30 wt.%, and 50 wt.% dry weight, respectively. The sample specimens with and without 1.5 wt.% of sodium silicate （SiO2/Na2O = 1.0） were cured under the ambient condition and elevated temperature curing at 50℃ for 24 hr. Experimental results showed that the introduction of sodium silicate solution and elevated temperature curing to sRHA-based solidified waste containing 30 wt.% of heavy metal sludge gave one day strength of 20 kg/cme compared to 0.9 kg/cm^2 for the control sample. XRD patterns indicated that most metal-sulfides present in the sludge were appeared in the solidified waste and SEM coupled with EDX techniques reveal these metal-sulfide particles were trapped within the lime-sRHA matrices. In addition, cumulative leaching behavior by tank test （EA NEN 7375：2004） showed that solidified waste containing up to 30 wt.% of heavy metal sludge was suitable to dispose in a secured landfill.展开更多
The quantitative and qualitative composition of Chinese municipal solid waste (MSW) differs significantly from German waste. The focus of this paper is on whether these differences also lead to dissimilar qualities of...The quantitative and qualitative composition of Chinese municipal solid waste (MSW) differs significantly from German waste. The focus of this paper is on whether these differences also lead to dissimilar qualities of leachates during storage or landfilling. Leachates ingredients determine the appropriate treatment technique. MSW compositions of the two cities Guilin (China) and Essen (Germany), each with approx. 600 000 inhabitants, are used to simulate Chinese and German MSW types. A sequencing batch reactor (SBR) is used, combining aerobic and anaerobic reaction principles, to test the biodegradability of leachates. Leachates are tested for temperature, pH-value, redox potentials, and oxygen concentration. Chemical oxygen demand (COD) values are determined. Within 8 h, the biodegradation rates for both kinds of leachates are more than 90%. Due to the high organic content of Chinese waste, the degradation rate for Guilin MSW leachate is even higher, up to 97%. The effluent from SBR technique is suitable for direct discharge into bodies of water.展开更多
The rapid development of the fluorinated pesticide industry has produced a large amount of fluorine-containing hazardous waste, especially inorganic fluoride-containing waste（IFCW）. A two-step process, including ext...The rapid development of the fluorinated pesticide industry has produced a large amount of fluorine-containing hazardous waste, especially inorganic fluoride-containing waste（IFCW）. A two-step process, including extraction and recovery, was developed to recover fluorine as synthetic cryolite from IFCW produced by the pesticide industry. The optimum conditions for extraction were found to be a temperature of 75℃, an initial p H（p Hi） of 12, a4-hr incubation time and a liquid-to-solid ratio of 40 m L/g; these conditions resulted in a fluorine extraction ratio of 99.0%. The effects of p H and the F/Al molar ratio on fluorine recovery and the compositional, mineralogical and morphological characteristics of the cryolite products were investigated. Field-emission scanning electron microscopy of recovered precipitates showed changes in morphology with the F/Al molar ratio. Coupling Fourier transform and infrared spectroscopy, X-ray diffraction indicated that the formation of Al F3-6was restricted as increasing p H. Both the amount of fluorine recovered and the quality of the cryolite were optimized at initial p H = 3 and a F/Al molar ratio 5.75. This study proposed a reliable and environmentally friendly method for the treatment of fluoridecontaining wastes, which could be suitable for industrial applications.展开更多
Disassembly and recycling of E-waste creates a series of environmental problems. The selection of a technologically reliable, environmentally friendly, economically affordable and socially acceptable recycling technol...Disassembly and recycling of E-waste creates a series of environmental problems. The selection of a technologically reliable, environmentally friendly, economically affordable and socially acceptable recycling technology for E-waste is a significant question. This study establishes a Monte-Carlo mathematical model of cost minimization, given the constraints of environmentally sound handling of the e-waste, in the context of Crystal Ball risk assessment and evaluation software. By following the streams of the different treatment processes, which consist of various technologies including disassembly, recycling and disposal, the econom-ics of various possibilities were identified and the optimal recycling technology proposed. The key factors of the proposed scenarios were determined by using sensitivity analysis. The results of this study show that, for discarded refrigerators, the operating life span plays the key role. The model supports maintenance and resale of the short lived refrigerators. For the longer lived refrigerators material recycling is recommended by the model. Sensitivity analysis shows that purchase cost, plastic sale price, condenser sale price and disassembly costs are the main effects. This study provides a significant technical support for policy making in E-waste management.展开更多
Solid waste landfills need to have final covers to 1) reduce the infiltration of rainfall into the waste mass and 2) reduce surface greenhouse gas emissions. Most regulations require that such final covers include hyd...Solid waste landfills need to have final covers to 1) reduce the infiltration of rainfall into the waste mass and 2) reduce surface greenhouse gas emissions. Most regulations require that such final covers include hydraulic barriers, such as compacted clays with or without geomembrane. Significant research has been undertaken to allow the use of evapotranspiration-based covers (often termed: Evapotranspiration (ET) Cover, Water Balance Covers, or Phyto Covers) as an alternative to the barrier concept covers. ET covers are designed so that they have the capacity to store water by the soil and also have plants or vegetation to remove the stored water. In ET covers, plant roots can enhance the aeration of soil by creating secondary macropores which improve the diffusion of oxygen into soil. Therefore, biological methane oxidation (a natural process in landfill soils) can be improved considerably by the soil structuring processes of vegetation, along with the increase of organic biomass in the soil associated with plant roots. This paper summarizes a study to investigate the capacity of an ET cover to reduce surface greenhouse gas emissions when implemented on a solid waste landfill. This study consisted of using a numerical model to estimate methane emission and oxidation through an ET cover under average climatic conditions in Bennignton, Nebraska, USA. Different simulations were performed using different methane loading flux (5 to 200 gm-2·d-1) as the bottom boundary. For all simulations, surface emissions were the lowest during the growing season and during warmer days of the year. Percent oxidation is the highest during the growing season and during warmer days. The lowest modeled surface emissions were always obtained during the growing season. Finally, correlations between percent oxidation and methane loading into simulated ET covers were proposed to estimate methane emissions and methane oxidation in ET covers.展开更多
Artificial zeolite was modified by nano-Fe3O4 for development of functional adsorbents.Subsequently,adsorbents such as calcium cross-linked nano-Fe3O4 microspheres (Ca-MS),calcium cross-linked nano-Fe3O4 modified zeol...Artificial zeolite was modified by nano-Fe3O4 for development of functional adsorbents.Subsequently,adsorbents such as calcium cross-linked nano-Fe3O4 microspheres (Ca-MS),calcium cross-linked nano-Fe3O4 modified zeolite microspheres (Ca-MZS) and iron cross-linked nano-Fe3O4 modified zeolite microspheres (Fe-MZS) were prepared and compared for their adsorption performance.The effects of adsorbent dosage,solution pH,initial concentration and ion content on the removal of Cu^2+ from wastewater are investigated,and the adsorption kinetics and isotherms for the adsorbent materials were analyzed.The experimental results indicate that for the initial concentration of Cu^2+ of 30 mg/L,the adsorption is noted to be most stable.The optimal initial pH for adsorbing Cu^2+ is observed to be 5.5.At an optimal dosage of Ca-MZS of 900 mg/L,the adsorption capacity is measured to be 28.25 mg/g,along with the removal rate of 72.49%.The addition of Na+ and K+ affects the adsorption of Cu^2+.For the Na^+ and K^+ concentration of 0.2 mmol/L,the Cu^2+ removal rate by Ca-MZS drops to 11.94% and 22.12%,respectively.As compared with the adsorbents such as Natural Zeolite (NZ),Ca-MS and Fe-MZS,Ca-MZS demonstrates the best removal effect in solution,where the removal rate reaches 84.27%,with the maximum adsorption capacity of 28.09 mg/g.The Cu^2+ adsorption kinetics of Ca-MZS is observed to follow the Elovich kinetic model,with the adsorption isotherm data fitting the Freundlich isotherm model by using the non-linear method.展开更多
A wet impact crusher was used to breakdown waste printed circuit boards （PCB＇s） in a water medium. The relationship between the yield of crushed product and the operating parameters was established. The crushing me...A wet impact crusher was used to breakdown waste printed circuit boards （PCB＇s） in a water medium. The relationship between the yield of crushed product and the operating parameters was established. The crushing mechanism was analyzed and the effects of hammerhead style, rotation speed, and inlet water volume on particle size distribution were investigated. The results show that the highest yield of -1 ＋ 0.75 mm sized product was obtained with an inlet water volume flow rate of 5.97 m3/h and a smooth hammerhead turning at 1246.15 r/rain. Cumulative undersize-product yield curves were fitted to a nonlinear function： the fitting correlation coefficient was greater than 0.998. These research results provide a theoretical basis for the highly effective wet crushing of PCB＇s.展开更多
As one of the largest human activities, World Expo is an important source of anthropogenic Greenhouse Gas emission（GHG）, and the GHG emission and other environmental impacts of the Expo Shanghai 2010, where around 5...As one of the largest human activities, World Expo is an important source of anthropogenic Greenhouse Gas emission（GHG）, and the GHG emission and other environmental impacts of the Expo Shanghai 2010, where around 59,397 tons of waste was generated during 184 Expo running days, were assessed by life cycle assessment（LCA）. Two scenarios, i.e., the actual and expected figures of the waste sector, were assessed and compared, and 124.01 kg CO2-equivalent（CO2-eq.）, 4.43 kg SO2-eq., 4.88 kg NO-3-eq., and 3509 m3 water per ton tourist waste were found to be released in terms of global warming（GW）, acidification（AC）,nutrient enrichment（NE） and spoiled groundwater resources（SGWR）, respectively. The total GHG emission was around 3499 ton CO2-eq. from the waste sector in Expo Park, among which 86.47% was generated during the waste landfilling at the rate of 107.24 kg CO2-eq.,and CH4, CO and other hydrocarbons（HC） were the main contributors. If the waste sorting process had been implemented according to the plan scenario, around 497 ton CO2-eq.savings could have been attained. Unlike municipal solid waste, with more organic matter content, an incineration plant is more suitable for tourist waste disposal due to its high heating value, from the GHG reduction perspective.展开更多
A study on the detection of probable radionuclides and their activity concentrations in the raw material (phosphate rock), final product (fertilizer) and waste samples collected from all the phosphate fertilizer facto...A study on the detection of probable radionuclides and their activity concentrations in the raw material (phosphate rock), final product (fertilizer) and waste samples collected from all the phosphate fertilizer factories (total two factories—A Diammonium Phosphate, DAP and a Triple Super Phosphate, TSP factory) in Bangladesh were carried out. A total of seven types of samples (grossly divided into solid and liquid types);liquid waste, waste-mixed river water, normal river water, phosphate rock, phosphate fertilizer, solid waste and normal soil;were analyzed under this study. Raw material samples were collected only from the TSP fertilizer factory. Fertilizer, solid and liquid waste samples were collected from both the factories under study. Moreover, normal soil and natural surface water samples from the suitable areas adjacent to the factories were also collected for the comparison purpose. The samples were analyzed by gamma ray spectrometry technique using a Hyper-Pure Germanium (HPGe) detector of 40% relative efficiency. The analysis of the samples showed that only natural radionuclides such as 226Ra, 232Th and 40K were present in the samples and no traces of artificial radioactivity were found in any of the samples. 40K was found below the detection limit in some samples. The analysis of the samples in the case of TSP fertilizer factory showed that the average activity concentrations of 226Ra and 232Th and 40K in raw materials were 851.27 ± 7.10, 19.63 ± 6.57 and 54.06 ± 5.93 Bq/kg, respectively, in final product 211.90 ± 4.74, 42.48 ± 10.56 Bq/kg and ND (Not Detected), respectively, in solid waste 187.49 ± 4.88, 70.06 ± 11.76 and 289.27 ± 40.24 Bq/kg, respectively and in liquid waste 6.26 ± 0.63, 10.01 ± 1.39 Bq/L and ND, respectively. The measured results in the case of samples collected from DAP fertilizer factory showed that the average activity concentrations of 226Ra and 232Th and 40K in the final product were 17.31 ± 3.92, 69.74 ± 9.88 and 48.46 ± 17.22 Bq/kg, respectively, in solid waste 24.47 ± 4.15, 164.62 ± 11.08, 191.52 ± 33.74 Bq/kg, respectively and in liquid waste 3.59 ± 1.05, 37.08 ± 3.30 Bq/L and ND, respectively. Considering the stored raw materials and wastes the part of the ambient environment of the factory, radium equivalent activity, radiation hazard index and external annual effective dose to the workers and public due to these materials were also calculated and compared with world average values.展开更多
This research paper was carried out specifically to examine the indiscriminate waste disposal and its effects on water quality of a nearby stream.The study witnessed two seasons(dry and rainy seasons).Field survey as ...This research paper was carried out specifically to examine the indiscriminate waste disposal and its effects on water quality of a nearby stream.The study witnessed two seasons(dry and rainy seasons).Field survey as well as laboratory analysis of collected samples were carried out.The results obtained indicated that River Ndongo has an important role in the activities of the inhabitants of Molyko.It is used as disposal site for waste,water is used for household activities and agricultural practices.This provides the inhabitants with the efficient site for waste disposal and a source of water for their activities.However,展开更多
Composting is being widely employed in the treatment of petroleum waste. The purpose of this study was to find the optimum control parameters for petroleum waste in-vessel composting. Various physical and chemical par...Composting is being widely employed in the treatment of petroleum waste. The purpose of this study was to find the optimum control parameters for petroleum waste in-vessel composting. Various physical and chemical parameters were monitored to evaluate their influence on the microbial communities present in composting. The CO2 evolution and the number of microorganisms were measured as the activity of composting. The results demonstrated that the optimum temperature, pH and moisture content were 56.5 - 59.5 degreesC, 7.0 - 8.5 and 55 % - 60%, respectively. Under the optimum conditions, the removal efficiency of petroleum hydrocarbon reached 83.29% after 30 days composting.展开更多
基金granting research funds (BT/NER/143/SP44344/2021) to Nanda Nath Saikia College under the North Eastern Region (NER) Biotech Hub Program。
文摘The current linear economy assumes abundant,easily accessible,and cost-effective natural resources.However,this assumption is unsustainable,especially considering the world’s current trajectory exceeding the Earth’s ecological limits.In contrast,circular economy(CE)reduces wastes and improves resource efficiency,making them a more sustainable alternative to the dominant linear model.Biomass energy generated from agricultural leftovers,forestry wastes,and municipal trash provides a renewable substitute for fossil fuels.This reduces greenhouse gas emissions and improves energy security.Proper waste management,including trash reduction,recycling,and innovative waste-to-energy technology,reduces the burden on landfills and incineration and creates renewable energy from materials that would otherwise go to waste.Although integrating these techniques is consistent with the CE’s resource efficiency and waste minimization principles,it requires addressing environmental,technical,and socioeconomic challenges.Given the pressing global issues,transitioning to a CE and implementing sustainable environmental practices are crucial to mitigate the current waste management crisis.The aim of this study is to emphasize the viability of biomass as a source of sustainable energy,the necessity of comprehensive strategies that prioritize ecological sustainability,community involvement,and innovation to achieve a circular principle based future,and the potential obstacles to the implementation of sustainable environmental practices.This study will aid in implementing CE practices to accomplish the Sustainable Development Goals(SDGs)by reducing greenhouse gas emissions and landfill loads.Beyond environmental benefits,it can also bring economic,social,and health improvements.Furthermore,this study will assist societies in addressing global issues,such as resource scarcity,pollution,and climate change,as well as transitioning to a more sustainable and resilient future.
文摘Accumulating operational experience in both aerobic and anaerobic mechanical biological waste treatment （MBT） makes it increasingly obvious that controlled water management would substantially reduce the cost of MBT and also enhance resource recovery of the organic and inorganic fraction. The MBT plant at Gescher, Germany, is used as an example in order to determine the quantity and composition of process water and leachates from intensive and subsequent rotting, pressing water from anaerobic digestion and scrubber water from acid exhaust air treatment, and hence prepare an MBT water balance. The potential of, requirements for and limits to internal process water reuse as well as the possibilities of resource recovery from scrubber water are also examined. Finally, an assimilated process water management concept with the purpose of an extensive reduction of wastewater quantity and freshwater demand is presented.
基金supported by the Key Research and Development Program of Gansu Province(22YF7FA070)the National Natural Science Foundation of China(22406076,22466026)the Basic Research Project of Yunnan Province(202301BE070001-017,202401CF070139,202401AS070085)。
文摘Iron and steel industry is one of the main sources of air pollution emissions in China.The sintering process is an important link in the blast furnace ironmaking process,but it is also accompanied by a large number of pollutants.Under the background of ultra-low emissions,iron and steel enterprises urgently need to upgrade their existing processes to address the existing process in practical application problems.In this study,a steel group in Gansu Province was taken as an example.By comparing and analyzing the pollutant emission characteristics before and after the ultra-low emission retrofit,the collaborative control effect of the combined process on SO_(2),NO_(x),particulate matter,and dioxins after the new retrofit was systematically evaluated.The results show that after the retrofit,the concentrations of particulate matter,SO_(2) and NO_(x) have dropped to near-zero levels,and the dioxin removal efficiency has reached 98.87%,with all indicators being better than the national ultra-low emission standards.The study confirms that the optimal combination of multi-pollutant collaborative treatment technologies is the key to achieving efficient emission reduction,among which selective catalytic reduction technology has a particularly significant synergistic removal effect on NO_(x) and dioxins.This study provides an important technical reference and practical basis for the ultra-low emission retrofit of the steel industry,and has important guiding significance for promoting the green retrofit of the industry.Its ultra-low emission retrofit is of great significance for achieving green and low-carbon development.
文摘Green macroalga Caulerpa lentillifera was found to have reasonable adsorption capacity for basic dyes, Astrazon Blue FGRL （AB）, Astrazon Red GTLN （AR）, and Astrazon Golden Yellow GL-E （AY）. The initial dye concentration was in the range of 100-1,800 mg/L. The dried algal sorbent was ground and sieved into 3 sizes： S （0.1-0.84 mm）, M （0.84-2.0 mm）, and L sizes （larger than 2.0 mm）. For all conditions examined in this work （at 25℃ in batch systems）, the adsorption reached equilibrium within the first hour. The kinetic data corresponded well with the pseudo second order kinetic model where the rate constant, k2, decreased as the sorbent size increased for all dyes. The adsorption isotherms followed both Langmuir and Freundlich models. Among three sorbent sizes, S size gave the highest adsorption capacity followed by M and L sizes. A reduction of sorbent size increased the specific surface area for mass transfer, and also increased the total pore volume, thus providing more active sites for adsorption. The adsorption of AB was adversely influenced by the protonation of algal surface at low pH. On the other hand, the adsorption of AR and AY could be due to weak electrostatic interaction, which was not significantly affected by pH. Increasing salinity of the system caused a decrease in adsorption capacity possibly due to the competition between Na^＋ and the dye cations for the binding sites on algal surface. Moreover, an increase in salinity generated a compressed electrical double layer on the algal surface which exerted repulsive force, retarding the adsorption of positive charged molecules such as the basic dyes.
基金the DAAD Sandwich Model Scholarships for Master's Students of the IITs and IIMs, 2016/17, who funded the research stay of Mr.Pravesh Tamang in Germany (Personal Ref No: 91635161)
文摘The production of polyhydroxyalkanoates(PHA) from wastewaters using microbial mixed cultures(MMC) has been attracting increased interest because of PHA's biodegradability characteristics. Production of PHA by an MMC enriched with PHA-accumulating bacteria was compared using anaerobically treated and acidified brewery wastewaters under various feeding strategies, namely pulse and batch feed addition. To obtain an enriched MMC, a sequencing batch reactor was inoculated with activated sludge fed with acetate and subjected to aerobic dynamic feeding. The enriched MMC was able to accumulate PHA up to 72.6% of cell dry weight(CDW) with pulse addition of acetate controlled by the dissolved oxygen(DO) concentration in the reactor. In a batch accumulation experiment with acetate,the PHA content achieved(28.5% CDW) was less than that of the pulse feeding strategy with the same amount of acetate(～2000 mg C/L). Using anaerobically treated and acidified brewery wastewater fed in pulses, the maximum PHA accumulated by the enriched MMC was similar for both wastewaters(45% CDW), in spite of the higher volatile fatty acid concentration in acidified brewery wastewater. The pulse feed addition controlled by the DO concentration was difficult to implement for wastewater as compared to acetate because the difference in DO concentration between substrate availability and depletion was low. For the batch addition of acidified wastewater, a slightly lower PHA content(39%CDW) was obtained. These results show that both brewery wastewaters can be utilized for PHA production with a similar maximum PHA storage capacity.
基金supported by the Hi-Tech Research and Development Program (863) of China (No. 2012AA06A116)
文摘The influence of CO2 content and presence of SO2 on the sequestration of CO2 by municipal solid waste incinerator （MSWI） fly ash was studied by investigating the carbonation reaction of MSWI fly ash with different combinations of simulated flue gas. The reaction between fly ash and 100% CO2 was relatively fast; the uptake of CO2 reached 87 g CO2/kg ash, and the sequestered CO2 could be entirely released at high temperatures. When CO2 content was reduced to 12%, the reaction rate decreased; the uptake fell to 41 g CO2/kg ash, and 70.7% of the sequestered CO2 could be released. With 12% CO2 in the presence of SO2, the reaction rate significantly decreased; the uptake was just 17 g CO2/kg ash, and only 52.9% of the sequestered CO2 could be released. SO2 in the simulated gas restricted the ability of fly ash to sequester CO2 because it blocked the pores of the ash.
基金Project supported by the National Research Center of Environmental and Hazardous Waste Management(NRC-EHWM), Chulalongko1 University,Thailand.
文摘The maximum specific methanogenic activity （SMA） of a sludge originating from a brewery wastewater treatment plant on the degradation of glucose was investigated at various levels of sulfate on a specific loading basis. Batch experiments were conducted in serum bottles at pH 7 and 35℃. A comparison of the values indicates that the SMA of this mixed culture was increased and reached its highest level of 0.128 g CH4 gas COD/（g VSS.d） when biomass was in contact with sulfate at a ratio of 1：0.114 by weight.
基金supported by the Environmental Protection Public Welfare Project (No. 201109035)
文摘Food waste treatment plants （FWTPs） are usually associated with odorous nuisance and health risks, which are partially caused by volatile organic compound （VOC） emissions. This study investigated the VOC emissions from a selected full-scale FWTP in China. The feedstock used in this plant was mainly collected from local restaurants. For a year, the FWTP was closely monitored on specific days in each season. Four major indoor treatment units of the plant, including the storage room, sorting/crushing room, hydrothermal hydrolysis unit, and aerobic fermentation unit, were chosen as the monitoring locations. The highest mean concentration of total VOC emissions was observed in the aerobic fermentation unit at 21,748.2-31,283.3 μg/m^3, followed by the hydrothermal hydrolysis unit at 10,798.1-23,144.4 μg/m^3. The detected VOC families included biogenic compounds （oxygenated compounds, hydrocarbons, terpenes, and organosulfur compounds） and abiogenic compounds （aromatic hydrocarbons and halocarbons）. Oxygenated compounds, particularly alcohols, were the most abundant compounds in all samples. With the use of odor index analysis and principal components analysis, the hydrothermal hydrolysis and aerobic fermentation units were clearly distinguished from the pre-treatment units, as characterized by their higher contributions to odorous nuisance. Methanthiol was the dominant odorant in the hydrothermal hydrolysis unit, whereas aldehyde was the dominant odorant in the aerobic fermentation unit. Terpenes, specifically limonene, had the highest level of propylene equivalent concentration during the monitoring periods. This concentration can contribute to the increase in the atmospheric reactivity and ozone formation potential in the surrounding air.
基金Supported by Research Fund for the Doctoral Program of Higher Education of China(No.20120073130009)National Natural Science Foundation of China(No.11175118)Research and innovation project of Shanghai Municipal Education Commission(No.12ZZ022)
文摘The properties of a Lanthanum bromide(LaBr3)detector and its response functions were investigated via experiments and simulations in this paper.The LaBr3detector had good relative energy resolution and higher efficiency than a high-purity germanium detector.Monte Carlo and other numerical methods were used to calculate the efficiencies of a LaBr3detector with a square collimation window.A model of the numerical method was established based on a pure geometric model that was consistent with the experimental situation.The results showed that the detector response functions calculated by these methods were in great agreement with experimental results.
基金funded by TRF Research Scholar(No. RMU5080007)the Royal Golden Jubilee Ph.D. Program under the Thailand Research Fund
文摘Strength development, leachability and microstructure of heavy metals from the solidified waste using synthesis rice husk ash （sRHA） and lime blended at the weight ratio of 1：1 were used as binders. The heavy metal-containing sludge was used at the level of 0 wt.%, 30 wt.%, and 50 wt.% dry weight, respectively. The sample specimens with and without 1.5 wt.% of sodium silicate （SiO2/Na2O = 1.0） were cured under the ambient condition and elevated temperature curing at 50℃ for 24 hr. Experimental results showed that the introduction of sodium silicate solution and elevated temperature curing to sRHA-based solidified waste containing 30 wt.% of heavy metal sludge gave one day strength of 20 kg/cme compared to 0.9 kg/cm^2 for the control sample. XRD patterns indicated that most metal-sulfides present in the sludge were appeared in the solidified waste and SEM coupled with EDX techniques reveal these metal-sulfide particles were trapped within the lime-sRHA matrices. In addition, cumulative leaching behavior by tank test （EA NEN 7375：2004） showed that solidified waste containing up to 30 wt.% of heavy metal sludge was suitable to dispose in a secured landfill.
基金Project supported by German Ministries of the State North Rhine-Westphalia
文摘The quantitative and qualitative composition of Chinese municipal solid waste (MSW) differs significantly from German waste. The focus of this paper is on whether these differences also lead to dissimilar qualities of leachates during storage or landfilling. Leachates ingredients determine the appropriate treatment technique. MSW compositions of the two cities Guilin (China) and Essen (Germany), each with approx. 600 000 inhabitants, are used to simulate Chinese and German MSW types. A sequencing batch reactor (SBR) is used, combining aerobic and anaerobic reaction principles, to test the biodegradability of leachates. Leachates are tested for temperature, pH-value, redox potentials, and oxygen concentration. Chemical oxygen demand (COD) values are determined. Within 8 h, the biodegradation rates for both kinds of leachates are more than 90%. Due to the high organic content of Chinese waste, the degradation rate for Guilin MSW leachate is even higher, up to 97%. The effluent from SBR technique is suitable for direct discharge into bodies of water.
基金supported by the Hi-Tech Research and Development Program (863) of China (No. 2007AA061300)the Innovation Program of Undergraduate Students in Shanghai Province (No. 0400107092)Collaborative Innovation Center for Regional Environmental Quality
文摘The rapid development of the fluorinated pesticide industry has produced a large amount of fluorine-containing hazardous waste, especially inorganic fluoride-containing waste（IFCW）. A two-step process, including extraction and recovery, was developed to recover fluorine as synthetic cryolite from IFCW produced by the pesticide industry. The optimum conditions for extraction were found to be a temperature of 75℃, an initial p H（p Hi） of 12, a4-hr incubation time and a liquid-to-solid ratio of 40 m L/g; these conditions resulted in a fluorine extraction ratio of 99.0%. The effects of p H and the F/Al molar ratio on fluorine recovery and the compositional, mineralogical and morphological characteristics of the cryolite products were investigated. Field-emission scanning electron microscopy of recovered precipitates showed changes in morphology with the F/Al molar ratio. Coupling Fourier transform and infrared spectroscopy, X-ray diffraction indicated that the formation of Al F3-6was restricted as increasing p H. Both the amount of fluorine recovered and the quality of the cryolite were optimized at initial p H = 3 and a F/Al molar ratio 5.75. This study proposed a reliable and environmentally friendly method for the treatment of fluoridecontaining wastes, which could be suitable for industrial applications.
基金Projects 50574094 supported by the National Natural Science Foundation of ChinaCPEUKF06-11 by the Key Laboratory Open Project of Education Ministry of China200600242 by the Science and Technology Innovation Project of Xuzhou
文摘Disassembly and recycling of E-waste creates a series of environmental problems. The selection of a technologically reliable, environmentally friendly, economically affordable and socially acceptable recycling technology for E-waste is a significant question. This study establishes a Monte-Carlo mathematical model of cost minimization, given the constraints of environmentally sound handling of the e-waste, in the context of Crystal Ball risk assessment and evaluation software. By following the streams of the different treatment processes, which consist of various technologies including disassembly, recycling and disposal, the econom-ics of various possibilities were identified and the optimal recycling technology proposed. The key factors of the proposed scenarios were determined by using sensitivity analysis. The results of this study show that, for discarded refrigerators, the operating life span plays the key role. The model supports maintenance and resale of the short lived refrigerators. For the longer lived refrigerators material recycling is recommended by the model. Sensitivity analysis shows that purchase cost, plastic sale price, condenser sale price and disassembly costs are the main effects. This study provides a significant technical support for policy making in E-waste management.
文摘Solid waste landfills need to have final covers to 1) reduce the infiltration of rainfall into the waste mass and 2) reduce surface greenhouse gas emissions. Most regulations require that such final covers include hydraulic barriers, such as compacted clays with or without geomembrane. Significant research has been undertaken to allow the use of evapotranspiration-based covers (often termed: Evapotranspiration (ET) Cover, Water Balance Covers, or Phyto Covers) as an alternative to the barrier concept covers. ET covers are designed so that they have the capacity to store water by the soil and also have plants or vegetation to remove the stored water. In ET covers, plant roots can enhance the aeration of soil by creating secondary macropores which improve the diffusion of oxygen into soil. Therefore, biological methane oxidation (a natural process in landfill soils) can be improved considerably by the soil structuring processes of vegetation, along with the increase of organic biomass in the soil associated with plant roots. This paper summarizes a study to investigate the capacity of an ET cover to reduce surface greenhouse gas emissions when implemented on a solid waste landfill. This study consisted of using a numerical model to estimate methane emission and oxidation through an ET cover under average climatic conditions in Bennignton, Nebraska, USA. Different simulations were performed using different methane loading flux (5 to 200 gm-2·d-1) as the bottom boundary. For all simulations, surface emissions were the lowest during the growing season and during warmer days of the year. Percent oxidation is the highest during the growing season and during warmer days. The lowest modeled surface emissions were always obtained during the growing season. Finally, correlations between percent oxidation and methane loading into simulated ET covers were proposed to estimate methane emissions and methane oxidation in ET covers.
基金Funded by the Science Foundation of Hubei Province of China(2015CFB706)。
文摘Artificial zeolite was modified by nano-Fe3O4 for development of functional adsorbents.Subsequently,adsorbents such as calcium cross-linked nano-Fe3O4 microspheres (Ca-MS),calcium cross-linked nano-Fe3O4 modified zeolite microspheres (Ca-MZS) and iron cross-linked nano-Fe3O4 modified zeolite microspheres (Fe-MZS) were prepared and compared for their adsorption performance.The effects of adsorbent dosage,solution pH,initial concentration and ion content on the removal of Cu^2+ from wastewater are investigated,and the adsorption kinetics and isotherms for the adsorbent materials were analyzed.The experimental results indicate that for the initial concentration of Cu^2+ of 30 mg/L,the adsorption is noted to be most stable.The optimal initial pH for adsorbing Cu^2+ is observed to be 5.5.At an optimal dosage of Ca-MZS of 900 mg/L,the adsorption capacity is measured to be 28.25 mg/g,along with the removal rate of 72.49%.The addition of Na+ and K+ affects the adsorption of Cu^2+.For the Na^+ and K^+ concentration of 0.2 mmol/L,the Cu^2+ removal rate by Ca-MZS drops to 11.94% and 22.12%,respectively.As compared with the adsorbents such as Natural Zeolite (NZ),Ca-MS and Fe-MZS,Ca-MZS demonstrates the best removal effect in solution,where the removal rate reaches 84.27%,with the maximum adsorption capacity of 28.09 mg/g.The Cu^2+ adsorption kinetics of Ca-MZS is observed to follow the Elovich kinetic model,with the adsorption isotherm data fitting the Freundlich isotherm model by using the non-linear method.
基金financially supported by the National Natural Science Foundation of China for Creative Research Groups Science Foundation (No.50921002)the National Natural Science Foundation of China (Nos.50574094 and 51074156)+2 种基金the China Postdoctoral Science (No.20090461153)the China Postdoctoral Science Foundation funded projects in particular (No.201003607)the Key Laboratory for Solid Waste Management and Environment Safety Open Foundation (No.swmes-2010-08)
文摘A wet impact crusher was used to breakdown waste printed circuit boards （PCB＇s） in a water medium. The relationship between the yield of crushed product and the operating parameters was established. The crushing mechanism was analyzed and the effects of hammerhead style, rotation speed, and inlet water volume on particle size distribution were investigated. The results show that the highest yield of -1 ＋ 0.75 mm sized product was obtained with an inlet water volume flow rate of 5.97 m3/h and a smooth hammerhead turning at 1246.15 r/rain. Cumulative undersize-product yield curves were fitted to a nonlinear function： the fitting correlation coefficient was greater than 0.998. These research results provide a theoretical basis for the highly effective wet crushing of PCB＇s.
基金financially supported by the National Natural Science Foundation of China (Nos. 50908144, 41173108)the Alexander von Humboldt Foundation (2010)+1 种基金The "Chenguang" project was supported by the Shanghai Municipal Education Commissionthe Shanghai Education Development Foundation (No. Z1126862)
文摘As one of the largest human activities, World Expo is an important source of anthropogenic Greenhouse Gas emission（GHG）, and the GHG emission and other environmental impacts of the Expo Shanghai 2010, where around 59,397 tons of waste was generated during 184 Expo running days, were assessed by life cycle assessment（LCA）. Two scenarios, i.e., the actual and expected figures of the waste sector, were assessed and compared, and 124.01 kg CO2-equivalent（CO2-eq.）, 4.43 kg SO2-eq., 4.88 kg NO-3-eq., and 3509 m3 water per ton tourist waste were found to be released in terms of global warming（GW）, acidification（AC）,nutrient enrichment（NE） and spoiled groundwater resources（SGWR）, respectively. The total GHG emission was around 3499 ton CO2-eq. from the waste sector in Expo Park, among which 86.47% was generated during the waste landfilling at the rate of 107.24 kg CO2-eq.,and CH4, CO and other hydrocarbons（HC） were the main contributors. If the waste sorting process had been implemented according to the plan scenario, around 497 ton CO2-eq.savings could have been attained. Unlike municipal solid waste, with more organic matter content, an incineration plant is more suitable for tourist waste disposal due to its high heating value, from the GHG reduction perspective.
文摘A study on the detection of probable radionuclides and their activity concentrations in the raw material (phosphate rock), final product (fertilizer) and waste samples collected from all the phosphate fertilizer factories (total two factories—A Diammonium Phosphate, DAP and a Triple Super Phosphate, TSP factory) in Bangladesh were carried out. A total of seven types of samples (grossly divided into solid and liquid types);liquid waste, waste-mixed river water, normal river water, phosphate rock, phosphate fertilizer, solid waste and normal soil;were analyzed under this study. Raw material samples were collected only from the TSP fertilizer factory. Fertilizer, solid and liquid waste samples were collected from both the factories under study. Moreover, normal soil and natural surface water samples from the suitable areas adjacent to the factories were also collected for the comparison purpose. The samples were analyzed by gamma ray spectrometry technique using a Hyper-Pure Germanium (HPGe) detector of 40% relative efficiency. The analysis of the samples showed that only natural radionuclides such as 226Ra, 232Th and 40K were present in the samples and no traces of artificial radioactivity were found in any of the samples. 40K was found below the detection limit in some samples. The analysis of the samples in the case of TSP fertilizer factory showed that the average activity concentrations of 226Ra and 232Th and 40K in raw materials were 851.27 ± 7.10, 19.63 ± 6.57 and 54.06 ± 5.93 Bq/kg, respectively, in final product 211.90 ± 4.74, 42.48 ± 10.56 Bq/kg and ND (Not Detected), respectively, in solid waste 187.49 ± 4.88, 70.06 ± 11.76 and 289.27 ± 40.24 Bq/kg, respectively and in liquid waste 6.26 ± 0.63, 10.01 ± 1.39 Bq/L and ND, respectively. The measured results in the case of samples collected from DAP fertilizer factory showed that the average activity concentrations of 226Ra and 232Th and 40K in the final product were 17.31 ± 3.92, 69.74 ± 9.88 and 48.46 ± 17.22 Bq/kg, respectively, in solid waste 24.47 ± 4.15, 164.62 ± 11.08, 191.52 ± 33.74 Bq/kg, respectively and in liquid waste 3.59 ± 1.05, 37.08 ± 3.30 Bq/L and ND, respectively. Considering the stored raw materials and wastes the part of the ambient environment of the factory, radium equivalent activity, radiation hazard index and external annual effective dose to the workers and public due to these materials were also calculated and compared with world average values.
文摘This research paper was carried out specifically to examine the indiscriminate waste disposal and its effects on water quality of a nearby stream.The study witnessed two seasons(dry and rainy seasons).Field survey as well as laboratory analysis of collected samples were carried out.The results obtained indicated that River Ndongo has an important role in the activities of the inhabitants of Molyko.It is used as disposal site for waste,water is used for household activities and agricultural practices.This provides the inhabitants with the efficient site for waste disposal and a source of water for their activities.However,
文摘Composting is being widely employed in the treatment of petroleum waste. The purpose of this study was to find the optimum control parameters for petroleum waste in-vessel composting. Various physical and chemical parameters were monitored to evaluate their influence on the microbial communities present in composting. The CO2 evolution and the number of microorganisms were measured as the activity of composting. The results demonstrated that the optimum temperature, pH and moisture content were 56.5 - 59.5 degreesC, 7.0 - 8.5 and 55 % - 60%, respectively. Under the optimum conditions, the removal efficiency of petroleum hydrocarbon reached 83.29% after 30 days composting.
