Two-dimensional rigid-plastic finite element method (FEM) was used for simulation of the effect of process parameterson the static recrystallization of 60SiMnA spring steel using MARC/AutoForge 3.1 software. A thermo-...Two-dimensional rigid-plastic finite element method (FEM) was used for simulation of the effect of process parameterson the static recrystallization of 60SiMnA spring steel using MARC/AutoForge 3.1 software. A thermo-mechanicalcoupled analysis was conducted considering the heat transfer between the workpiece, the roll and the environment,and the heat generation due to plastic work. The static recrystallization laws under different processing conditionsand the predicted distribution of the static recrystallization volume fraction on the deformation cross section arepresented.展开更多
In order to investigate the influence of processing parameters on the granularity distribution of superalloy powders during the atomization of plasma rotating electrode processing (PREP), in this paper FGH95 superallo...In order to investigate the influence of processing parameters on the granularity distribution of superalloy powders during the atomization of plasma rotating electrode processing (PREP), in this paper FGH95 superalloy powders is prepared under different processing conditions by PREP and the influence of PREP processing parameters on the granularity distribution of FGH95 superalloy powders is discussed based on fractal geometry theory. The results show that with the increase of rotating velocity of the self-consuming electrode, the fractal dimension of the granularity distribution increases linearly, which results in the increase of the proportion of smaller powders. The change of interval between plasma gun and the self-consuming electrode has a little effect on the granularity distribution, also the fractal dimension of the granularity distribution changed a little correspondingly.展开更多
For 308L and 347L weld metals of austenitc stainless steels (ASS), hydrogen induced cracking (HIC) occurred during dynamically charging under constant load. The threshold stress intensity for HIC, Km, decreased linear...For 308L and 347L weld metals of austenitc stainless steels (ASS), hydrogen induced cracking (HIC) occurred during dynamically charging under constant load. The threshold stress intensity for HIC, Km, decreased linearly with the logarithm of the concentration of diffusible hydrogen C0 in the weld metals and the rolled plate of type 304L ASS, i.e., KIH=85.2-10.71nC0 (308L), KIH=76.1-9.31n C0(347L), and KIH=91.7-10.11nC0(304L). The fracture mode for HIC in the three type of ASS changed from ductile to brittle with the decrease in the applied stress intensity KI or/and the increase in C0. The boundary line between ductile and brittle fracture surfaces was KI-54+25exp(-C0/153)=0.展开更多
The feasibility for modifying the wettability and floatability of sulfideminerals by electron beam irradiation has been studied experimentally. The wettability ofcrystalline pyrite and floatability of some sulfide as ...The feasibility for modifying the wettability and floatability of sulfideminerals by electron beam irradiation has been studied experimentally. The wettability ofcrystalline pyrite and floatability of some sulfide as pyrite, arsenopyrite, chalcopyrite andmarmatite after irradiation were examined by flotation in a modified Hallimond tube. Experimentalresults show that the hydrophobicity of crystalline pyrite enhances with the increase of irradiationdose in a low dose range. And the flotation responses of sulfide minerals on irradiation dose varywith the mineral species and particle size. The floatability of minerals can be regulated byaltering irradiation dose. An explanation for the mechanism has been suggested based on theprinciple of radiation chemistry.展开更多
The fabrication and characterization of new type Nickel oxide/KOH/Activecarbon super-capacitor have been described. Porous nickel oxide was prepared by hydrolysis of nickelacetate and heated in air at 300 deg C. The r...The fabrication and characterization of new type Nickel oxide/KOH/Activecarbon super-capacitor have been described. Porous nickel oxide was prepared by hydrolysis of nickelacetate and heated in air at 300 deg C. The resulting nickel oxide behaved as an electrochemicalcapacitor electrode with a specific capacitance (50-70 F/g) superior to most active carbonelectrodes. This kind of nickel oxide maintained high utilization at high rate of discharge (i.e.,high power density) and had excellent cycle life more than 1000 times, while the capacitance of thecell composed of two identical nickel oxide electrodes was poor at high discharge current densityand the maximum operational voltage of this type capacitor was limited to 0.5 V. A new typesuper-capacitor was designed in which the nickel oxide and the active carbon were applied to thepositive and negative electrodes respectively. The breakdown voltage of this type super-capacitorwas improved effectively to 0.8 V and excellent characteristic of high power discharge was attainedin this way. The Nickel oxide/KOH/Active carbon super-capacitor has promising potentials in portabletelecommunications, uninterruptable power supplies and battery load leveling applications.展开更多
Stress corrosion cracking (SCC) of a PZT ferroelectric ceramics in various media, such as moist atmosphere, silicon oil, methanol, water and formamide, and its anisotropy have been investigated at constant load test u...Stress corrosion cracking (SCC) of a PZT ferroelectric ceramics in various media, such as moist atmosphere, silicon oil, methanol, water and formamide, and its anisotropy have been investigated at constant load test using a single-edge notched tensile specimen. The results showed that SCC could occur in all media, and the threshold stress intensity factor of SCC in water and formamide, KISCC, revealed anisotropy. The KISCC for poling direction parallel to the crack plane, was greater than that perpendicular to the crack plane, similar to the anisotropy of fracture toughness KIC; however, the anisotropy factor of KISCC, which was =1.8 (in formamide) and 2.1 (in water), was larger than that of KIC, which is =1.4. The stress-induced 90° domain switching causes the anisotropy of KIC and KISCC, besides, the resistance of SCC also has anisotropy.展开更多
文摘Two-dimensional rigid-plastic finite element method (FEM) was used for simulation of the effect of process parameterson the static recrystallization of 60SiMnA spring steel using MARC/AutoForge 3.1 software. A thermo-mechanicalcoupled analysis was conducted considering the heat transfer between the workpiece, the roll and the environment,and the heat generation due to plastic work. The static recrystallization laws under different processing conditionsand the predicted distribution of the static recrystallization volume fraction on the deformation cross section arepresented.
文摘In order to investigate the influence of processing parameters on the granularity distribution of superalloy powders during the atomization of plasma rotating electrode processing (PREP), in this paper FGH95 superalloy powders is prepared under different processing conditions by PREP and the influence of PREP processing parameters on the granularity distribution of FGH95 superalloy powders is discussed based on fractal geometry theory. The results show that with the increase of rotating velocity of the self-consuming electrode, the fractal dimension of the granularity distribution increases linearly, which results in the increase of the proportion of smaller powders. The change of interval between plasma gun and the self-consuming electrode has a little effect on the granularity distribution, also the fractal dimension of the granularity distribution changed a little correspondingly.
基金This project was supported by the Special Fund for the MajorState Basic Research projects(No. G19990650).
文摘For 308L and 347L weld metals of austenitc stainless steels (ASS), hydrogen induced cracking (HIC) occurred during dynamically charging under constant load. The threshold stress intensity for HIC, Km, decreased linearly with the logarithm of the concentration of diffusible hydrogen C0 in the weld metals and the rolled plate of type 304L ASS, i.e., KIH=85.2-10.71nC0 (308L), KIH=76.1-9.31n C0(347L), and KIH=91.7-10.11nC0(304L). The fracture mode for HIC in the three type of ASS changed from ductile to brittle with the decrease in the applied stress intensity KI or/and the increase in C0. The boundary line between ductile and brittle fracture surfaces was KI-54+25exp(-C0/153)=0.
基金the National Natural Science Foundation of China (No.59874002).
文摘The feasibility for modifying the wettability and floatability of sulfideminerals by electron beam irradiation has been studied experimentally. The wettability ofcrystalline pyrite and floatability of some sulfide as pyrite, arsenopyrite, chalcopyrite andmarmatite after irradiation were examined by flotation in a modified Hallimond tube. Experimentalresults show that the hydrophobicity of crystalline pyrite enhances with the increase of irradiationdose in a low dose range. And the flotation responses of sulfide minerals on irradiation dose varywith the mineral species and particle size. The floatability of minerals can be regulated byaltering irradiation dose. An explanation for the mechanism has been suggested based on theprinciple of radiation chemistry.
基金the National Natural Science Foundation of China (No.59807001).
文摘The fabrication and characterization of new type Nickel oxide/KOH/Activecarbon super-capacitor have been described. Porous nickel oxide was prepared by hydrolysis of nickelacetate and heated in air at 300 deg C. The resulting nickel oxide behaved as an electrochemicalcapacitor electrode with a specific capacitance (50-70 F/g) superior to most active carbonelectrodes. This kind of nickel oxide maintained high utilization at high rate of discharge (i.e.,high power density) and had excellent cycle life more than 1000 times, while the capacitance of thecell composed of two identical nickel oxide electrodes was poor at high discharge current densityand the maximum operational voltage of this type capacitor was limited to 0.5 V. A new typesuper-capacitor was designed in which the nickel oxide and the active carbon were applied to thepositive and negative electrodes respectively. The breakdown voltage of this type super-capacitorwas improved effectively to 0.8 V and excellent characteristic of high power discharge was attainedin this way. The Nickel oxide/KOH/Active carbon super-capacitor has promising potentials in portabletelecommunications, uninterruptable power supplies and battery load leveling applications.
文摘Stress corrosion cracking (SCC) of a PZT ferroelectric ceramics in various media, such as moist atmosphere, silicon oil, methanol, water and formamide, and its anisotropy have been investigated at constant load test using a single-edge notched tensile specimen. The results showed that SCC could occur in all media, and the threshold stress intensity factor of SCC in water and formamide, KISCC, revealed anisotropy. The KISCC for poling direction parallel to the crack plane, was greater than that perpendicular to the crack plane, similar to the anisotropy of fracture toughness KIC; however, the anisotropy factor of KISCC, which was =1.8 (in formamide) and 2.1 (in water), was larger than that of KIC, which is =1.4. The stress-induced 90° domain switching causes the anisotropy of KIC and KISCC, besides, the resistance of SCC also has anisotropy.
