In this paper, we analyzed diurnal and annual seasonal variations of solar wind parameters such as interplanetary magnetic field (IMF), proton density (N), solar wind speed (V) and solar wind dynamic pressure (Pdym), ...In this paper, we analyzed diurnal and annual seasonal variations of solar wind parameters such as interplanetary magnetic field (IMF), proton density (N), solar wind speed (V) and solar wind dynamic pressure (Pdym), during the solar cycles 23 and 24. Our study shows that strong geomagnetic disturbances are observed at the equinoxes during both solar cycles. The highest proton densities are observed at solstices during both solar cycles. The greatest solar wind speeds are observed at the equinoxes of solar cycle 23 and at the solstices of solar cycle 24. The highest solar wind dynamic pressures are observed at the solstices of both solar cycles. We also observed an asymmetrical evolution of the seasonal diurnal values of the solar wind parameters during the two cycles, except for the proton density. Our investigations also highlight the fact that the seasonal diurnal values of the solar wind parameters are significant at solar cycle 23 compared to solar cycle 24 characterized by a global weak in solar plasma conditions since the deep minimum that followed the solar cycle 23 leading to an absence of a persistent polar coronal hole. The drop observed in polar field and solar winds parameters during solar cycle 24 is reproduced on seasons (solstices and equinoxes). The solar cycle 23 and 24 appear to be two magnetically opposite solar cycles regardless the time scales.展开更多
The aim of this work was to determine the characteristic dimension governing transfers during convective dryin</span></span><span style="white-space:normal;"><span style="font-famil...The aim of this work was to determine the characteristic dimension governing transfers during convective dryin</span></span><span style="white-space:normal;"><span style="font-family:"">g</span></span><span style="white-space:normal;"><span style="font-family:"">. Parallelepipedic and cylindrical form of sweet potato was used. For the parallelepipedic form P_L-l-e, the thickness e is set to 1</span></span><span style="white-space:normal;"><span style="font-family:""> </span></span><span style="white-space:normal;"><span style="font-family:"">cm while the length L and the width l are varying. The results show that the variation of the other dimensions other than the thickness e does not influence the transfers in a considerable way. The same observation is made for the cylindrical samples c_H-R by keeping the radius R constant. This present work therefore allows us to conclude that the thickness of the parallelepiped shaped samples and the radius of the cylindrical shapes, all being the smallest dimensions, characterize the transfers.展开更多
This study examines the influence of magnetic field and temperature on the transient voltage of a polycrystalline silicon radial junction solar cell in a dynamic regime under multispectral illumination. Radial junctio...This study examines the influence of magnetic field and temperature on the transient voltage of a polycrystalline silicon radial junction solar cell in a dynamic regime under multispectral illumination. Radial junction solar cells represent a major advancement in photovoltaic technologies, as they optimize light absorption and charge collection efficiency. The focus is on the impact of the magnetic field and temperature on the decay of transient voltage, which provides crucial information on recombination processes and the lifetime of minority carriers. The results reveal that the magnetic field tends to increase the transient voltage by directly affecting the transient electron density. Indeed, for B > 7 × 10−5 T, the magnetic field prolongs the relaxation time by increasing the transient voltage amplitude. Additionally, rising temperatures accelerate (ranging from 290 K to 450 K) recombination processes, thereby reducing the transient voltage, although this effect is moderated by the presence of a magnetic field. The study highlights the complex interaction between magnetic field and temperature, with significant impacts on the transient behaviour.展开更多
In this study we review the occurrence of different types (A, B, C, M, and X classes) of solar flares during different solar cycle phases from 1996 to 2019 covering the solar cycles 23 and 24. During this period, a to...In this study we review the occurrence of different types (A, B, C, M, and X classes) of solar flares during different solar cycle phases from 1996 to 2019 covering the solar cycles 23 and 24. During this period, a total of 19,126 solar flares were observed regardless the class: 3548 flares in solar cycle 23 (SC23) and 15,668 flares in solar cycle 24 (SC24). Our findings show that the cycle 23 has observed the highest occurrences of M-class and X-class flares, whereas cycle 24 has pointed out a predominance of B-class and C-class flares throughout its different phases. The results indicate that the cycle 23 was magnetically more intense than cycle 24, leading to more powerful solar flares and more frequent geomagnetic storms, capable of generating significant electromagnetic emissions that can affect satellites and GPS signals. The decrease in intense solar flares during cycle 24 compared to cycle 23 reflects an evolution in solar activity patterns over time.展开更多
In this study, we examined variability of sun-related energies, auroral electrojet current, ring current, and magnetopause current during solar cycles 23 and 24. The study revealed a dependence of sun-related energies...In this study, we examined variability of sun-related energies, auroral electrojet current, ring current, and magnetopause current during solar cycles 23 and 24. The study revealed a dependence of sun-related energies to the Sun and Earth currents systems with solar activity from 1996 to 2019. A decrease in the correlation between sun-related energies and sunspot number was observed over solar cycles 23 and 24 (0.88 for the solar cycle 23 and 0.66 for the solar cycle 24), with a drop in the speed of magnetic disturbances in the solar wind. These results could be attributed to the decrease in Sun’s magnetic field toroidal component magnitude induced by a weak in sunspots number and solar flares during the solar cycle 24. A weak in the Earth currents systems (auroral electrojet current, ring current, and magnetopause current) is also observed. During the decrease in the Earth currents, several peaks are observed, indicating a nonlinear dependence in the Earth currents variation (ring current, auroral electrojet current, and magnetopause current) from solar cycle 23 to solar cycle 24. This could be attributed to the Corotating Interaction Regions (CIRs) observed during the declining phase of solar cycle 23 and the deep minimum preceding solar cycle 24.展开更多
In light of the increasing recognition of the necessity to evaluate and mitigate the environmental impact of human activities, the aim of this study is to assess the greenhouse gases emitted in 2022 by the Kossodo the...In light of the increasing recognition of the necessity to evaluate and mitigate the environmental impact of human activities, the aim of this study is to assess the greenhouse gases emitted in 2022 by the Kossodo thermal power plant as a consequence of its electricity production. The specific objective was to identify the emission sources and quantify the gases generated, with the purpose of proposing effective solutions for reducing the plant’s ecological footprint. In order to achieve the objectives set out in the study, the Bilan Carbone® method was employed. Following an analysis of the plant’s activities, seven emission items were identified as requiring further investigation. The data was gathered from the plant’s activity reports, along with measurements and questionnaires distributed to employees. The data collected was subjected to processing in order to produce the sought activity data. The Bilan Carbone® V7.1 spreadsheet was employed to convert the activity data into equivalent quantities of CO2. The full assessment indicates that the majority of the power plant’s emissions come from the combustion of HFO and DDO, accounting for 96.11% of the Kossodo power plant’s total GHG emissions in 2022. The plant produced 280,585,676 kilowatt-hours (kWh), resulting in emissions of 218,492.785 ± 10,924.639 tCO2e, which yielded an emission factor of 0.78 kgCO2e/kWh for the year 2022. In order to reduce this rate, recommendations for improved energy efficiency have been issued to management and all staff.展开更多
Management of wastewater is a concern of developing countries. In Burkina Faso, an on-site septic system installed on the property is predominant and those systems product high quantities of faecal sludge which are no...Management of wastewater is a concern of developing countries. In Burkina Faso, an on-site septic system installed on the property is predominant and those systems product high quantities of faecal sludge which are not treated adequately before discharge. Our country is mainly fed by surface water, while water is the main vector of many diseases. So it is very important to manage efficiently wastewater and faeces. The treatment of faecal sludge by planted beds can use local persistent emergent plants like Andropogon gayanus (LPA) and Cymbopogon nardus (LPN). Those planted beds are compared to a non-planted bed (sludge drying bed) (LT). Treating raw sludge (BB) we got the yield over 90% concerning the biological oxygen demand (BOD<sub>5</sub>) for the LPA while the two others gave performances of 75% and 76% respectively. Regarding the chemical oxygen demand (COD), LPN gave better yields with 77% of removal against 71% and 69% for LPA and LT respectively. Overall, the pilots assured removal of orthophosphates varying between 77% and 79%, while the Kjeldahl nitrogen is removed by the various beds with respective fields of 94%, 96.5% and 97.5% for LPN, LPA and LT. The microbiological pollution abatement is in the order of 1 log unit on average for all beds.展开更多
This work is interested in solving the complex problem of understanding mass transfers in biological media. The contribution of the initial sample size is taken into account. Transfers are established more efficiently...This work is interested in solving the complex problem of understanding mass transfers in biological media. The contribution of the initial sample size is taken into account. Transfers are established more efficiently in small samples. Thus, from the first 50 minutes, the cubic sample at 1 cm stop is already at 50% while the sample at 4 cm edge is at about 90% of its initial water content. Likewise the shape is combined with the size. But it is revealed that if we fix similar characteristic dimensions, we can bypass the notion of initial shape. Thus the cubic samples 4 cm of edges. 4 cm diameter of spherical shape, 4 cm × 4 cm height-diameter cylindrical one, all dry identically.展开更多
Peanut shells from Burkina Faso were characterized using mineralogical, microstructural and chemical methods to perform its possibility to be used as reinforce in adobe bricks. It consists of cellulose (48 wt%), hemic...Peanut shells from Burkina Faso were characterized using mineralogical, microstructural and chemical methods to perform its possibility to be used as reinforce in adobe bricks. It consists of cellulose (48 wt%), hemicellulose (3 wt%) and lignin (28 wt%). The peanut shells were characterized by high porosity and showed water absorption around 198% at 72 hours. Its chemical composition is essentially composed of silica, iron oxides, alumina and calcium oxide. Its microstructure showed that the peanut shells were a compilation of microfibers with high porous of borders. In watery solution, the peanut shells released polyphenols. Thermal conductivity of peanut at 25 °C was <span>0.155 ± 0.021 W/mK. The physico-chemical characteristics of peanut shells were similar to those found with agricultural by-products used in adobe reinforce.</span>展开更多
In this study, the authors investigated the performance of different buffer layers through the electrical parameters such as J<sub>sc</sub>, V<sub>oc</sub>, QE and η of the quaternary system C...In this study, the authors investigated the performance of different buffer layers through the electrical parameters such as J<sub>sc</sub>, V<sub>oc</sub>, QE and η of the quaternary system Cu(In,Ga)Se<sub>2</sub> solar cells. The performance of Cu(In,Ga)Se<sub>2</sub>solar cells has been modeled and numerically simulated by using the SCAPS- 1D device simulation tool. The cells with a ZnSe, Zn(O,S) and (Zn,Mg)O buffer layers were compared with the reference CdS buffer layer. The investigation of ZnSe, Zn(O, S) and (Zn,Mg)O-based cells to substitute the traditional CdS in the future shows that the ZnSe-buffer layer is a potential material to replace CdS, which revealed the best efficiency of 20.76%, the other electrical parameters are: J<sub>SC</sub> = 34.6 mA/cm<sup>2</sup>, V<sub>OC</sub> = 0.76 V and FF = 79.6%. The losses as a function of the temperature are estimated at 0.1%/K, among all kinds of buffer layers studied. We have also shown that the use of a high band-gap buffer layer is necessary to obtain a better short-circuit current density J<sub>SC</sub>. From our results, we note that the chalcogenide solar cells with Zn-based alternative buffer layer have almost the same stability thatthe traditional CdS buffer layer solar cells have.展开更多
In this paper, we perform experiments on the drying of widely consumed food products in Africa. Tomatoes and peppers are considered as products with a complex structure. Zucchini, cucumber, eggplant and cabbages are t...In this paper, we perform experiments on the drying of widely consumed food products in Africa. Tomatoes and peppers are considered as products with a complex structure. Zucchini, cucumber, eggplant and cabbages are the other products used in these drying experiments, having different intrinsic parameters. Most food products have three components, namely skin, flesh containing seeds and the central spongy structure, that do not have the same behavior during their convective drying. Skin is the component that significantly reduces drying while the flesh is easy to dry. By drying the samples considering their intrinsic parameters, one quickly realizes the complex nature of mass and heat transfers during the drying of biological products.展开更多
In this work, a model of convective drying of mango slices was developed and validated by experiments. This model was established by considering slices shrinkage in the energy and the mass balances during the thin lay...In this work, a model of convective drying of mango slices was developed and validated by experiments. This model was established by considering slices shrinkage in the energy and the mass balances during the thin layer drying. The drying kinetics and the temperature curves of the product were simulated using the model at various drying temperatures. The simulated curves were then compared to the experimental curves obtained using a convective dryer controlled in temperature and moisture. The results showed that the drying curves were suitably fitted by the thin layer drying model with a correlation coefficient r<sup>2</sup> = 0.997. Thus, taking shrinkage into account, it is possible to predict more effectively the thin layer drying kinetics of mango slices. This study therefore contributed to the mango drying modelling and to the mango dryer setting.展开更多
In this work we study the behaviour of the dielectric constant of BaTiO3 single crystals doped with Cu and Fe for different ion percentages, particularly, the influence of these hetemvalent substitutions on the ferroe...In this work we study the behaviour of the dielectric constant of BaTiO3 single crystals doped with Cu and Fe for different ion percentages, particularly, the influence of these hetemvalent substitutions on the ferroelectric-paraelectric phase transition whose temperature is found at Tc=120℃ for pure samples. The dielectric constant e in terms of temperature shows that the Curie temperature decreases when the quantity of impurities increases and presents a broadening and flattering of the maximum oft（T） within higher values, with the transition becoming more and more diffuse. It is interesting to have a material with very high permittivity （high-k） because of its capacity to store an important quantity of electric charges. The t anisotropy and the Curie-Weiss law are also verified with a good ratio between the slopes ofε^-l（T） from both sides of the transition, leading to a Curie constant： C= 13 × 10^4 K for BaTiO3：1.6%Fe in the polar phase. BaTiO3 is a displacive ferroelectric going through a first-order phase transition. The substitutions have an effect on the dynamics of the perovskite lattice. They induce charges transfer to Ti and a diminution of elastic forces in BaTiO3. Then we discuss the transition but on the nature of the material. fact that the maximum of permittivity does not depend on the phase展开更多
An experimental study for the drying kinetics of whole okra was carried out. In the study, different ages were considered by taking into account influence of okra maturity on its convective drying. The 2D moisture evo...An experimental study for the drying kinetics of whole okra was carried out. In the study, different ages were considered by taking into account influence of okra maturity on its convective drying. The 2D moisture evolution inside the product and its maturity were evaluated by fitting experimental data versus drying time. The water effective diffusion coefficient of okra at different maturity states was gotten by the experimental model using Fick’s second law. A parametric study was carried out in the ranging of okra age from 2 to 7 days at 60℃, both fruits gathered on the same plant to avoid divergences due to okra varieties that can induce difference on physical structure and the chemical composition. It was found from the experimental results that okra maturity has important influence on its behaviour during convective drying. At 2, 3, 4, 5 and 7 days old, the drying effective time was respectively 780, 1000, 1155, 850 and 750 min. Effective diffusivity of the okra in this order of age was 1.38 × 10-10, 6.09 × 10-11, 1.23 × 10-11, 8.98 × 10-11, and 1.05 × 10-10 m2/s in the present study, while the average initial moisture content was respectively 12.27, 9.00, 7.53, 5.97 and 4.92 Kgw/Kgdm.展开更多
A theoretical study of a polysilicon solar cell with a radial junction in static regime under monochromatic illumination is presented in this paper. The junction radial solar cell geometry is illustrated and described...A theoretical study of a polysilicon solar cell with a radial junction in static regime under monochromatic illumination is presented in this paper. The junction radial solar cell geometry is illustrated and described. The carriers’ diffusion equation is established and solved under quasi-neutral base assumption with boundaries conditions and Bessel equations. New analytical expressions of electrons and holes density and photocurrent are found. The wavelength and structural parameters (base radius, emitter thickness) influences on charge carriers density and photocurrent are shown and examined.展开更多
In a context of climate change exacerbated by the increasing scarcity of fossil fuels, renewable energies, in particular photovoltaic solar energy, offer a promising alternative. Solar energy is non-polluting, globall...In a context of climate change exacerbated by the increasing scarcity of fossil fuels, renewable energies, in particular photovoltaic solar energy, offer a promising alternative. Solar energy is non-polluting, globally available and the most widely distributed resource on Earth. However, the intermittency of this energy source considerably limits its expansion. To solve this problem, storage techniques are being used, in particular, electrochemical storage using lithium-ion batteries. In this article, we will evaluate the performance of lithium-ion batteries when integrated into a photovoltaic grid. To do this, modelling and simulation of a photovoltaic system connected to a lithium-ion battery storage system will be carried out using MATLAB/Simulink software. A diagnostic of the energy consumption of the Kaya Polytechnic University Centre will be carried out, and the data will then be used in the simulator to observe the behaviour of the PV-Lion system. The results obtained indicate that lithium-ion batteries can effectively meet the centre’s energy demand. In addition, it was observed that lithium-ion batteries perform better under high energy demand than the other battery technologies studied. Successive storage systems with the same capacity but different battery technologies were compared. It was found that these storage systems can handle a maximum power of 4 × 10<sup>5</sup> W for lead-acid batteries, 6.5 × 10<sup>5</sup> W for nickel-cadmium batteries, 8.5 × 10<sup>5</sup> W for nickel-metal-hydride batteries, and more than 10 × 10<sup>5</sup> W for lithium-ion technology.展开更多
Diabetes mellitus is a socially significant disease characterized by chronic hyperglycemia and metabolic disorders of proteins, carbohydrates, and lipids due to reduced function of insulin. Medicinal plants, rich in b...Diabetes mellitus is a socially significant disease characterized by chronic hyperglycemia and metabolic disorders of proteins, carbohydrates, and lipids due to reduced function of insulin. Medicinal plants, rich in bioactive components that promote prevention and treatment, are inexpensive and no side effects. <i>Apium graveolens</i>, <i>Cleome gynandra</i>, and <i>Hibiscus sabdariffa</i> from Burkina Faso were investigated for their phytochemical profile and antioxidant activities. The high-performance thin-layer chromatography profile revealed flavonoids, tannins, and sterols in these herbaceous. The <i>Hibiscus sabdariffa</i> methanolic extract exhibited the highest total phenolic (138.4 ± 0.5 mg GAE/g DW) and flavonoid (52.8 ± 0.6 mg RuE/g DW) contents comparatively to <i>Cleome gynandra</i> and <i>Apium graveolens</i>. <i>Hibiscus sabdariffa</i> methanolic extract also presented the highest antioxidant activity (IC<sub>50</sub> = 0.31 ± 0.002 mg/mL) using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging capacity assay. A high correlation between flavonoid contents and hydrophilic antioxidant activities (r = 0.99) was observed, indicating that flavonoids contribute significatively to these herbaceous antioxidant properties. <i>Apium graveolens</i>, <i>Cleome gynandra, and <i>Hibiscus sabdariffa</i> constitute a natural source of phenolic compounds that could be exploited in diabetes mellitus management.</i>展开更多
In this work, we have modeled and simulated the electrical performance of CIGS thin-film solar cell using one-dimensional simulation software (SCAPS-1D). Starting from a baseline model that reproduced the experimental...In this work, we have modeled and simulated the electrical performance of CIGS thin-film solar cell using one-dimensional simulation software (SCAPS-1D). Starting from a baseline model that reproduced the experimental results, the properties of the absorber layer and the CIGS/Mo interface have been explored, and the requirements for high-efficiency CIGS solar cell were proposed. Simulation results show that the band-gap, acceptor density, defect density are crucial parameters that affect the performance of the solar cell. The best conversion efficiency is obtained when the absorber band-gap is around 1.2 eV, the acceptor density at 10<sup>16</sup> cm<sup><span style="white-space:nowrap;">−</span>3</sup> and the defect density less than 10<sup>14</sup> cm<sup><span style="white-space:nowrap;">−</span>3</sup>. In addition, CIGS/Mo interface has been investigated. It appears that a thin MoSe<sub>2</sub> layer reduces recombination at this interface. An improvement of 1.5 to 2.5 mA/cm<sup>2</sup> in the current density (<em>J<sub>sc</sub></em>) depending on the absorber thickness is obtained.展开更多
This study investigates climatic parameters (rainfall, and temperature) over Burkina Faso and the possible role of solar activity and its induced energies. Through morphological investigations, we analyzed solar activ...This study investigates climatic parameters (rainfall, and temperature) over Burkina Faso and the possible role of solar activity and its induced energies. Through morphological investigations, we analyzed solar activity indices (sunspot number, IMF, PC index, Cosmic rays) over the last three solar cycles (1975-2020). Results about interplanetary heating show that joule heating is well correlated with the dynamic pressure of the solar plasma. Climate parameters (rainfall, Temperature) variabilities are modulated by disturbances in solar activity: 1) quiet solar characterized by a drop in solar plasma’s parameters is associated with important cloud cover and consequently bring important rainfall which chills terrestrial atmosphere, 2) active solar characterized by important input energy is associated with weak incident cosmic ray consequently with low cloudiness which brings warming. Thus, the possible natural link can be suggested between solar activity and climatic parameters even if it is not the only factor of global warming.展开更多
Photovoltaic solar energy is still in its infancy in Burkina Faso, despite the country’s high solar potential. The electricity grid is experiencing an increase in demand for energy, creating a shortfall in supply. Th...Photovoltaic solar energy is still in its infancy in Burkina Faso, despite the country’s high solar potential. The electricity grid is experiencing an increase in demand for energy, creating a shortfall in supply. The Zagtouli photovoltaic solar power plant in Burkina Faso is the first milestone in the development of renewable photovoltaic energy, with a rated output of 33.6 Megawatts peak, to strengthen the electricity grid by reducing hydrocarbon consumption. The aim of this work is to evaluate the performance of the plant by proposing a performance score for the Zagtouli plant, which should provide a basis for assessing the performance of a power plant. To meet the objectives, we collected data for three consecutive years of production, from 2019 to 2021. From this data, we used the method based on the calculation of the performance indicators specified by the International Energy Agency (IEA) and described in the standardised norms IEC (International Electrotechnical Commission) CEI61724, and we also carried out a performance classification using the K-Means method. It is clear that with the results obtained for the PR performance index (over 70%), the installation can be classified as one of the best-performing systems. It also emerges that various losses (temperatures on the panels, cabling, partial shading, spectral losses, dirt, and unexpected inverter failures) have a negative impact on the installation’s energy production.展开更多
文摘In this paper, we analyzed diurnal and annual seasonal variations of solar wind parameters such as interplanetary magnetic field (IMF), proton density (N), solar wind speed (V) and solar wind dynamic pressure (Pdym), during the solar cycles 23 and 24. Our study shows that strong geomagnetic disturbances are observed at the equinoxes during both solar cycles. The highest proton densities are observed at solstices during both solar cycles. The greatest solar wind speeds are observed at the equinoxes of solar cycle 23 and at the solstices of solar cycle 24. The highest solar wind dynamic pressures are observed at the solstices of both solar cycles. We also observed an asymmetrical evolution of the seasonal diurnal values of the solar wind parameters during the two cycles, except for the proton density. Our investigations also highlight the fact that the seasonal diurnal values of the solar wind parameters are significant at solar cycle 23 compared to solar cycle 24 characterized by a global weak in solar plasma conditions since the deep minimum that followed the solar cycle 23 leading to an absence of a persistent polar coronal hole. The drop observed in polar field and solar winds parameters during solar cycle 24 is reproduced on seasons (solstices and equinoxes). The solar cycle 23 and 24 appear to be two magnetically opposite solar cycles regardless the time scales.
文摘The aim of this work was to determine the characteristic dimension governing transfers during convective dryin</span></span><span style="white-space:normal;"><span style="font-family:"">g</span></span><span style="white-space:normal;"><span style="font-family:"">. Parallelepipedic and cylindrical form of sweet potato was used. For the parallelepipedic form P_L-l-e, the thickness e is set to 1</span></span><span style="white-space:normal;"><span style="font-family:""> </span></span><span style="white-space:normal;"><span style="font-family:"">cm while the length L and the width l are varying. The results show that the variation of the other dimensions other than the thickness e does not influence the transfers in a considerable way. The same observation is made for the cylindrical samples c_H-R by keeping the radius R constant. This present work therefore allows us to conclude that the thickness of the parallelepiped shaped samples and the radius of the cylindrical shapes, all being the smallest dimensions, characterize the transfers.
文摘This study examines the influence of magnetic field and temperature on the transient voltage of a polycrystalline silicon radial junction solar cell in a dynamic regime under multispectral illumination. Radial junction solar cells represent a major advancement in photovoltaic technologies, as they optimize light absorption and charge collection efficiency. The focus is on the impact of the magnetic field and temperature on the decay of transient voltage, which provides crucial information on recombination processes and the lifetime of minority carriers. The results reveal that the magnetic field tends to increase the transient voltage by directly affecting the transient electron density. Indeed, for B > 7 × 10−5 T, the magnetic field prolongs the relaxation time by increasing the transient voltage amplitude. Additionally, rising temperatures accelerate (ranging from 290 K to 450 K) recombination processes, thereby reducing the transient voltage, although this effect is moderated by the presence of a magnetic field. The study highlights the complex interaction between magnetic field and temperature, with significant impacts on the transient behaviour.
文摘In this study we review the occurrence of different types (A, B, C, M, and X classes) of solar flares during different solar cycle phases from 1996 to 2019 covering the solar cycles 23 and 24. During this period, a total of 19,126 solar flares were observed regardless the class: 3548 flares in solar cycle 23 (SC23) and 15,668 flares in solar cycle 24 (SC24). Our findings show that the cycle 23 has observed the highest occurrences of M-class and X-class flares, whereas cycle 24 has pointed out a predominance of B-class and C-class flares throughout its different phases. The results indicate that the cycle 23 was magnetically more intense than cycle 24, leading to more powerful solar flares and more frequent geomagnetic storms, capable of generating significant electromagnetic emissions that can affect satellites and GPS signals. The decrease in intense solar flares during cycle 24 compared to cycle 23 reflects an evolution in solar activity patterns over time.
文摘In this study, we examined variability of sun-related energies, auroral electrojet current, ring current, and magnetopause current during solar cycles 23 and 24. The study revealed a dependence of sun-related energies to the Sun and Earth currents systems with solar activity from 1996 to 2019. A decrease in the correlation between sun-related energies and sunspot number was observed over solar cycles 23 and 24 (0.88 for the solar cycle 23 and 0.66 for the solar cycle 24), with a drop in the speed of magnetic disturbances in the solar wind. These results could be attributed to the decrease in Sun’s magnetic field toroidal component magnitude induced by a weak in sunspots number and solar flares during the solar cycle 24. A weak in the Earth currents systems (auroral electrojet current, ring current, and magnetopause current) is also observed. During the decrease in the Earth currents, several peaks are observed, indicating a nonlinear dependence in the Earth currents variation (ring current, auroral electrojet current, and magnetopause current) from solar cycle 23 to solar cycle 24. This could be attributed to the Corotating Interaction Regions (CIRs) observed during the declining phase of solar cycle 23 and the deep minimum preceding solar cycle 24.
文摘In light of the increasing recognition of the necessity to evaluate and mitigate the environmental impact of human activities, the aim of this study is to assess the greenhouse gases emitted in 2022 by the Kossodo thermal power plant as a consequence of its electricity production. The specific objective was to identify the emission sources and quantify the gases generated, with the purpose of proposing effective solutions for reducing the plant’s ecological footprint. In order to achieve the objectives set out in the study, the Bilan Carbone® method was employed. Following an analysis of the plant’s activities, seven emission items were identified as requiring further investigation. The data was gathered from the plant’s activity reports, along with measurements and questionnaires distributed to employees. The data collected was subjected to processing in order to produce the sought activity data. The Bilan Carbone® V7.1 spreadsheet was employed to convert the activity data into equivalent quantities of CO2. The full assessment indicates that the majority of the power plant’s emissions come from the combustion of HFO and DDO, accounting for 96.11% of the Kossodo power plant’s total GHG emissions in 2022. The plant produced 280,585,676 kilowatt-hours (kWh), resulting in emissions of 218,492.785 ± 10,924.639 tCO2e, which yielded an emission factor of 0.78 kgCO2e/kWh for the year 2022. In order to reduce this rate, recommendations for improved energy efficiency have been issued to management and all staff.
文摘Management of wastewater is a concern of developing countries. In Burkina Faso, an on-site septic system installed on the property is predominant and those systems product high quantities of faecal sludge which are not treated adequately before discharge. Our country is mainly fed by surface water, while water is the main vector of many diseases. So it is very important to manage efficiently wastewater and faeces. The treatment of faecal sludge by planted beds can use local persistent emergent plants like Andropogon gayanus (LPA) and Cymbopogon nardus (LPN). Those planted beds are compared to a non-planted bed (sludge drying bed) (LT). Treating raw sludge (BB) we got the yield over 90% concerning the biological oxygen demand (BOD<sub>5</sub>) for the LPA while the two others gave performances of 75% and 76% respectively. Regarding the chemical oxygen demand (COD), LPN gave better yields with 77% of removal against 71% and 69% for LPA and LT respectively. Overall, the pilots assured removal of orthophosphates varying between 77% and 79%, while the Kjeldahl nitrogen is removed by the various beds with respective fields of 94%, 96.5% and 97.5% for LPN, LPA and LT. The microbiological pollution abatement is in the order of 1 log unit on average for all beds.
文摘This work is interested in solving the complex problem of understanding mass transfers in biological media. The contribution of the initial sample size is taken into account. Transfers are established more efficiently in small samples. Thus, from the first 50 minutes, the cubic sample at 1 cm stop is already at 50% while the sample at 4 cm edge is at about 90% of its initial water content. Likewise the shape is combined with the size. But it is revealed that if we fix similar characteristic dimensions, we can bypass the notion of initial shape. Thus the cubic samples 4 cm of edges. 4 cm diameter of spherical shape, 4 cm × 4 cm height-diameter cylindrical one, all dry identically.
文摘Peanut shells from Burkina Faso were characterized using mineralogical, microstructural and chemical methods to perform its possibility to be used as reinforce in adobe bricks. It consists of cellulose (48 wt%), hemicellulose (3 wt%) and lignin (28 wt%). The peanut shells were characterized by high porosity and showed water absorption around 198% at 72 hours. Its chemical composition is essentially composed of silica, iron oxides, alumina and calcium oxide. Its microstructure showed that the peanut shells were a compilation of microfibers with high porous of borders. In watery solution, the peanut shells released polyphenols. Thermal conductivity of peanut at 25 °C was <span>0.155 ± 0.021 W/mK. The physico-chemical characteristics of peanut shells were similar to those found with agricultural by-products used in adobe reinforce.</span>
文摘In this study, the authors investigated the performance of different buffer layers through the electrical parameters such as J<sub>sc</sub>, V<sub>oc</sub>, QE and η of the quaternary system Cu(In,Ga)Se<sub>2</sub> solar cells. The performance of Cu(In,Ga)Se<sub>2</sub>solar cells has been modeled and numerically simulated by using the SCAPS- 1D device simulation tool. The cells with a ZnSe, Zn(O,S) and (Zn,Mg)O buffer layers were compared with the reference CdS buffer layer. The investigation of ZnSe, Zn(O, S) and (Zn,Mg)O-based cells to substitute the traditional CdS in the future shows that the ZnSe-buffer layer is a potential material to replace CdS, which revealed the best efficiency of 20.76%, the other electrical parameters are: J<sub>SC</sub> = 34.6 mA/cm<sup>2</sup>, V<sub>OC</sub> = 0.76 V and FF = 79.6%. The losses as a function of the temperature are estimated at 0.1%/K, among all kinds of buffer layers studied. We have also shown that the use of a high band-gap buffer layer is necessary to obtain a better short-circuit current density J<sub>SC</sub>. From our results, we note that the chalcogenide solar cells with Zn-based alternative buffer layer have almost the same stability thatthe traditional CdS buffer layer solar cells have.
文摘In this paper, we perform experiments on the drying of widely consumed food products in Africa. Tomatoes and peppers are considered as products with a complex structure. Zucchini, cucumber, eggplant and cabbages are the other products used in these drying experiments, having different intrinsic parameters. Most food products have three components, namely skin, flesh containing seeds and the central spongy structure, that do not have the same behavior during their convective drying. Skin is the component that significantly reduces drying while the flesh is easy to dry. By drying the samples considering their intrinsic parameters, one quickly realizes the complex nature of mass and heat transfers during the drying of biological products.
文摘In this work, a model of convective drying of mango slices was developed and validated by experiments. This model was established by considering slices shrinkage in the energy and the mass balances during the thin layer drying. The drying kinetics and the temperature curves of the product were simulated using the model at various drying temperatures. The simulated curves were then compared to the experimental curves obtained using a convective dryer controlled in temperature and moisture. The results showed that the drying curves were suitably fitted by the thin layer drying model with a correlation coefficient r<sup>2</sup> = 0.997. Thus, taking shrinkage into account, it is possible to predict more effectively the thin layer drying kinetics of mango slices. This study therefore contributed to the mango drying modelling and to the mango dryer setting.
文摘In this work we study the behaviour of the dielectric constant of BaTiO3 single crystals doped with Cu and Fe for different ion percentages, particularly, the influence of these hetemvalent substitutions on the ferroelectric-paraelectric phase transition whose temperature is found at Tc=120℃ for pure samples. The dielectric constant e in terms of temperature shows that the Curie temperature decreases when the quantity of impurities increases and presents a broadening and flattering of the maximum oft（T） within higher values, with the transition becoming more and more diffuse. It is interesting to have a material with very high permittivity （high-k） because of its capacity to store an important quantity of electric charges. The t anisotropy and the Curie-Weiss law are also verified with a good ratio between the slopes ofε^-l（T） from both sides of the transition, leading to a Curie constant： C= 13 × 10^4 K for BaTiO3：1.6%Fe in the polar phase. BaTiO3 is a displacive ferroelectric going through a first-order phase transition. The substitutions have an effect on the dynamics of the perovskite lattice. They induce charges transfer to Ti and a diminution of elastic forces in BaTiO3. Then we discuss the transition but on the nature of the material. fact that the maximum of permittivity does not depend on the phase
文摘An experimental study for the drying kinetics of whole okra was carried out. In the study, different ages were considered by taking into account influence of okra maturity on its convective drying. The 2D moisture evolution inside the product and its maturity were evaluated by fitting experimental data versus drying time. The water effective diffusion coefficient of okra at different maturity states was gotten by the experimental model using Fick’s second law. A parametric study was carried out in the ranging of okra age from 2 to 7 days at 60℃, both fruits gathered on the same plant to avoid divergences due to okra varieties that can induce difference on physical structure and the chemical composition. It was found from the experimental results that okra maturity has important influence on its behaviour during convective drying. At 2, 3, 4, 5 and 7 days old, the drying effective time was respectively 780, 1000, 1155, 850 and 750 min. Effective diffusivity of the okra in this order of age was 1.38 × 10-10, 6.09 × 10-11, 1.23 × 10-11, 8.98 × 10-11, and 1.05 × 10-10 m2/s in the present study, while the average initial moisture content was respectively 12.27, 9.00, 7.53, 5.97 and 4.92 Kgw/Kgdm.
文摘A theoretical study of a polysilicon solar cell with a radial junction in static regime under monochromatic illumination is presented in this paper. The junction radial solar cell geometry is illustrated and described. The carriers’ diffusion equation is established and solved under quasi-neutral base assumption with boundaries conditions and Bessel equations. New analytical expressions of electrons and holes density and photocurrent are found. The wavelength and structural parameters (base radius, emitter thickness) influences on charge carriers density and photocurrent are shown and examined.
文摘In a context of climate change exacerbated by the increasing scarcity of fossil fuels, renewable energies, in particular photovoltaic solar energy, offer a promising alternative. Solar energy is non-polluting, globally available and the most widely distributed resource on Earth. However, the intermittency of this energy source considerably limits its expansion. To solve this problem, storage techniques are being used, in particular, electrochemical storage using lithium-ion batteries. In this article, we will evaluate the performance of lithium-ion batteries when integrated into a photovoltaic grid. To do this, modelling and simulation of a photovoltaic system connected to a lithium-ion battery storage system will be carried out using MATLAB/Simulink software. A diagnostic of the energy consumption of the Kaya Polytechnic University Centre will be carried out, and the data will then be used in the simulator to observe the behaviour of the PV-Lion system. The results obtained indicate that lithium-ion batteries can effectively meet the centre’s energy demand. In addition, it was observed that lithium-ion batteries perform better under high energy demand than the other battery technologies studied. Successive storage systems with the same capacity but different battery technologies were compared. It was found that these storage systems can handle a maximum power of 4 × 10<sup>5</sup> W for lead-acid batteries, 6.5 × 10<sup>5</sup> W for nickel-cadmium batteries, 8.5 × 10<sup>5</sup> W for nickel-metal-hydride batteries, and more than 10 × 10<sup>5</sup> W for lithium-ion technology.
文摘Diabetes mellitus is a socially significant disease characterized by chronic hyperglycemia and metabolic disorders of proteins, carbohydrates, and lipids due to reduced function of insulin. Medicinal plants, rich in bioactive components that promote prevention and treatment, are inexpensive and no side effects. <i>Apium graveolens</i>, <i>Cleome gynandra</i>, and <i>Hibiscus sabdariffa</i> from Burkina Faso were investigated for their phytochemical profile and antioxidant activities. The high-performance thin-layer chromatography profile revealed flavonoids, tannins, and sterols in these herbaceous. The <i>Hibiscus sabdariffa</i> methanolic extract exhibited the highest total phenolic (138.4 ± 0.5 mg GAE/g DW) and flavonoid (52.8 ± 0.6 mg RuE/g DW) contents comparatively to <i>Cleome gynandra</i> and <i>Apium graveolens</i>. <i>Hibiscus sabdariffa</i> methanolic extract also presented the highest antioxidant activity (IC<sub>50</sub> = 0.31 ± 0.002 mg/mL) using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging capacity assay. A high correlation between flavonoid contents and hydrophilic antioxidant activities (r = 0.99) was observed, indicating that flavonoids contribute significatively to these herbaceous antioxidant properties. <i>Apium graveolens</i>, <i>Cleome gynandra, and <i>Hibiscus sabdariffa</i> constitute a natural source of phenolic compounds that could be exploited in diabetes mellitus management.</i>
文摘In this work, we have modeled and simulated the electrical performance of CIGS thin-film solar cell using one-dimensional simulation software (SCAPS-1D). Starting from a baseline model that reproduced the experimental results, the properties of the absorber layer and the CIGS/Mo interface have been explored, and the requirements for high-efficiency CIGS solar cell were proposed. Simulation results show that the band-gap, acceptor density, defect density are crucial parameters that affect the performance of the solar cell. The best conversion efficiency is obtained when the absorber band-gap is around 1.2 eV, the acceptor density at 10<sup>16</sup> cm<sup><span style="white-space:nowrap;">−</span>3</sup> and the defect density less than 10<sup>14</sup> cm<sup><span style="white-space:nowrap;">−</span>3</sup>. In addition, CIGS/Mo interface has been investigated. It appears that a thin MoSe<sub>2</sub> layer reduces recombination at this interface. An improvement of 1.5 to 2.5 mA/cm<sup>2</sup> in the current density (<em>J<sub>sc</sub></em>) depending on the absorber thickness is obtained.
文摘This study investigates climatic parameters (rainfall, and temperature) over Burkina Faso and the possible role of solar activity and its induced energies. Through morphological investigations, we analyzed solar activity indices (sunspot number, IMF, PC index, Cosmic rays) over the last three solar cycles (1975-2020). Results about interplanetary heating show that joule heating is well correlated with the dynamic pressure of the solar plasma. Climate parameters (rainfall, Temperature) variabilities are modulated by disturbances in solar activity: 1) quiet solar characterized by a drop in solar plasma’s parameters is associated with important cloud cover and consequently bring important rainfall which chills terrestrial atmosphere, 2) active solar characterized by important input energy is associated with weak incident cosmic ray consequently with low cloudiness which brings warming. Thus, the possible natural link can be suggested between solar activity and climatic parameters even if it is not the only factor of global warming.
文摘Photovoltaic solar energy is still in its infancy in Burkina Faso, despite the country’s high solar potential. The electricity grid is experiencing an increase in demand for energy, creating a shortfall in supply. The Zagtouli photovoltaic solar power plant in Burkina Faso is the first milestone in the development of renewable photovoltaic energy, with a rated output of 33.6 Megawatts peak, to strengthen the electricity grid by reducing hydrocarbon consumption. The aim of this work is to evaluate the performance of the plant by proposing a performance score for the Zagtouli plant, which should provide a basis for assessing the performance of a power plant. To meet the objectives, we collected data for three consecutive years of production, from 2019 to 2021. From this data, we used the method based on the calculation of the performance indicators specified by the International Energy Agency (IEA) and described in the standardised norms IEC (International Electrotechnical Commission) CEI61724, and we also carried out a performance classification using the K-Means method. It is clear that with the results obtained for the PR performance index (over 70%), the installation can be classified as one of the best-performing systems. It also emerges that various losses (temperatures on the panels, cabling, partial shading, spectral losses, dirt, and unexpected inverter failures) have a negative impact on the installation’s energy production.
