The constrained weighted-non-negative matrix factorization(CW-NMF)hybrid receptor model was applied to study the influence of steelmaking activities on PM_(2.5)(particulate matter with equivalent aerodynamic diameter ...The constrained weighted-non-negative matrix factorization(CW-NMF)hybrid receptor model was applied to study the influence of steelmaking activities on PM_(2.5)(particulate matter with equivalent aerodynamic diameter less than 2.5μm)composition in Dunkerque,Northern France.Semi-diurnal PM_(2.5)samples were collected using a high volume sampler in winter 2010 and spring 2011 and were analyzed for trace metals,water-soluble ions,and total carbon using inductively coupled plasma–atomic emission spectrometry(ICP-AES),ICP-mass spectrometry(ICP-MS),ionic chromatography and micro elemental carbon analyzer.The elemental composition shows that NO_(3)^(-),SO_(4)^(2-),NH_4~+and total carbon are the main PM_(2.5)constituents.Trace metals data were interpreted using concentration roses and both influences of integrated steelworks and electric steel plant were evidenced.The distinction between the two sources is made possible by the use Zn/Fe and Zn/Mn diagnostic ratios.Moreover Rb/Cr,Pb/Cr and Cu/Cd combination ratio are proposed to distinguish the ISW-sintering stack from the ISW-fugitive emissions.The a priori knowledge on the influencing source was introduced in the CW-NMF to guide the calculation.Eleven source profiles with various contributions were identified:8 are characteristics of coastal urban background site profiles and 3 are related to the steelmaking activities.Between them,secondary nitrates,secondary sulfates and combustion profiles give the highest contributions and account for 93%of the PM_(2.5)concentration.The steelwork facilities contribute in about 2%of the total PM_(2.5)concentration and appear to be the main source of Cr,Cu,Fe,Mn,Zn.展开更多
The influence of in-port ship emissions on gases and PM10 concentrations has been estimated in the port city of Calais, northern France, one of the busiest harbor in Europe, with numerous rotations of ferries or roll-...The influence of in-port ship emissions on gases and PM10 concentrations has been estimated in the port city of Calais, northern France, one of the busiest harbor in Europe, with numerous rotations of ferries or roll-on/roll-off cargo in average per day. NOx, SO2, O3 and PM10 concentrations were continuously measured over a three-month period, as well as real-time particle size distribution. A rural site located at Cape Gris-Nez, 20 km from Calais, was considered to deduce intrinsic contribution of ship emissions at the harbor city. The average concentrations of the studied species as well as the pattern of the conditional bivariate probability function at the two sites evidenced that in-port shipping, especially during the maneuvering operations, has an important influence on the NOx and SO2 concentrations. The impact of shipping in the harbor of Calais on average concentrations was estimated to 5l% for SO2, 35% for NO, 15% for NO2 and 2% for PM10 in the studied period. Concentration peaks of SO2 and NOx associated with an 03 depletion appeared synchronized with departures and arrivals of ferries. For winds blowing from the harbor, when compared to the background level, the number of particles appeared 10 times higher, with the highest differences in the 30-67 nm and the 109-167 nm size ranges. The average impact of in-port ships on PM10 concentrations was estimated to ＋28.9 μg/m^3 and concerned mainly the PM1 size fraction （40%）. Punctually, PM10 can potentially reach a concentration value close to 100μg/m^3.展开更多
Particulate matter in ambient air constitutes a complex mixture of fine and ultrafine particles composed of various chemical compounds including metals, ions, and organics. A multidisciplinary approach was developed b...Particulate matter in ambient air constitutes a complex mixture of fine and ultrafine particles composed of various chemical compounds including metals, ions, and organics. A multidisciplinary approach was developed by studying physico-chemical characteristics and mechanisms involved in the toxicity of particulate atmospheric pollution. PM0.3-2.s and PM2.5 including ultrafine particles were sampled in Dunkerque, a French industrialized seaside city. PM samples were characterized from a chemical and toxicological point of view. Physico-chemical characterization evidenced that PM2.5 comes from several sources： natural ones, such as soil resuspension and marine sea-salt emissions, as well as anthropogenic ones, such as shipping traffic, road traffic, and industrial activities. Human BEAS-2B tung cells were exposed to PM0.3-2.5, or to the Extractable Organic Matter （EOM） of PM0.3-2.5 and PM2.s. These exposures induced several mechanisms of action implied in the genotoxicity, such as oxidative DNA adducts and DNA Damage Response. The toxicity of PM-EOM was higher for the sample including the ultrafine fraction （PM2.5） containing also higher concentrations of polycyclic aromatic hydrocarbons. These results evidenced the major role of organic compounds in the toxicity of PM.展开更多
Primary and secondary organic aerosols in PM_(2.5)were investigated over a one-year campaign at Zouk Mikael and Fiaa,Lebanon.The n-alkanes concentrations were quite similar at both sites(26-29 ng/m^(3))and mainly expl...Primary and secondary organic aerosols in PM_(2.5)were investigated over a one-year campaign at Zouk Mikael and Fiaa,Lebanon.The n-alkanes concentrations were quite similar at both sites(26-29 ng/m^(3))and mainly explained by anthropogenic emissions rather than natural ones.The concentrations of total Polycyclic Aromatic Hydrocarbons(PAHs)were nearly three times higher at Zouk Mikael(2.56 ng/m^(3))compared to Fiaa(0.95 ng/m^(3)),especially for indeno[1,2,3-c,d]pyrene linked to the presence of the power plant.A characteristic indeno[1,2,3-c,d]pyrene/(indeno[1,2,3-c,d]pyrene+benzo[g,h,i]perylene)ratio in the range0.8-1.0 was determined for heavy fuel oil combustion from the power plant.Fatty acids and hopanes were also investigated and were assigned to cooking activities and vehicular emissions respectively.Phthalates were identified for the first time in Lebanon with high concentrations at Zouk and Fiaa(106.88 and 97.68 ng/m^(3) respectively).Moreover,the biogenic secondary aerosols revealed higher concentrations in summer.The total terpene concentration varied between 131 ng/m^(3) at Zouk Mikael in winter to 469 ng/m3 at Fiaa in summer.Additionnally,the concentrations of the dicarboxylic acids especially for adipic and phthalic acids were more influenced by anthropogenic sources.The analysis of molecular markers and diagnostic ratios indicated that the sites were strongly affected by anthropogenic sources such as waste open burning,diesel private generators,cooking activities,road transport,power plant,and industrial emissions.Moreover,results showed different pattern during winter and summer seasons.Whereas,higher concentrations of biogenic markers were clearly encountered during the summer period.展开更多
Iron-containing SBA-15 catalysts have been prepared following different synthesis routes, direct synthesis by adjusting pH at 3 and 6 and with post synthesis procedure. Activity and stability of these materials were a...Iron-containing SBA-15 catalysts have been prepared following different synthesis routes, direct synthesis by adjusting pH at 3 and 6 and with post synthesis procedure. Activity and stability of these materials were assessed on the photo-Fenton degradation of phenolic aqueous solutions by H2O2 using near ultraviolet irradiation （254 nm） at room temperature and initial neutral pH. Their catalytic performance was mentioned in terms of phenol and TOC （total organic carbon） conversions. Several complementary techniques, including X-ray, nitrogen sorption isotherms, UV （Ultraviolet） visible, were used to evaluate the final structural and textural properties of calcined Fe-SBA 15 materials. These materials show a high activity and stability of iron species.展开更多
Mycosphaerella graminieola （anamorph： Zymoseptoria tritici） is the causal agent of Septoria tritici blotch, the most frequently occurring disease on wheat crops worldwide. A set of 163 monoconidial isolates of this...Mycosphaerella graminieola （anamorph： Zymoseptoria tritici） is the causal agent of Septoria tritici blotch, the most frequently occurring disease on wheat crops worldwide. A set of 163 monoconidial isolates of this fungus were sampled in 2012 from five geographical locations of Tunisia （Bizerte, B6ja, Kef, Jendouba and Siliana） in order to examine the status of strobilurin resistance of M. graminicola in this country. The resistance was assessed by using PCR-based mismatch mutation assay that determined the cytochrome b substitution G143A responsible for strobilurin resistance. All isolates were found sensitive since they possessed the wild-type allele G143 conferring sensitivity. This study confirms previous reports on the fungus in Tunisia and reveals that the Tunisian population of M. graminicola remains fully sensitive to strobilurin fungicides. An appropriate management of strobilurin applications in Tunisia is thereby recommended to prevent local development and widespread of resistance, as in Europe, where pathogen populations are fully resistant to strobilurins today.展开更多
This study aims to investigate the ability of an imidazolium biobased Zwitterionic Ionic Liquids(ZILs)in enhancing the phytoavailability of copper from garden(G)and vineyard(V)soils using the model plant ryegrass.Unco...This study aims to investigate the ability of an imidazolium biobased Zwitterionic Ionic Liquids(ZILs)in enhancing the phytoavailability of copper from garden(G)and vineyard(V)soils using the model plant ryegrass.Uncontaminated and artificially contaminated CuSO_(4) soils,unamended and ZIL-amended soil modalities were designed.The copper/ZIL molar ratio(1/4)introduced was rationally established based on molecular modeling and on the maximal copper concentration in artificially contaminated soil.Higher accumulation of copper in the shoots was detected for the uncontaminated and copper contaminated ZIL amended V soils(18.9 and 23.3 mg/kg,respectively)contrary to G soils together with a ZIL concentration of around 3%(W/W)detected by LC-MS analyses.These data evidenced a Cu-accumulation improvement of 38%and 66%compared to non-amended V soils(13.6 and 13.9 mg/kg respectively).ZIL would be mainly present under Cu(II)-ZIL_(4) complexes in the shoots.The impact on the chemical composition of shoot was also studied.The results show that depending on the soils modalitity,the presence of free copper and/or ZIL led to different chemical compositions in lignin and monomeric sugar contents.In the biorefinery context,performances of enzymatic hydrolysis of shoots were also related to the presence of both ZIL and copper under free or complex forms.Ecotoxicity assessment of the vineyard soil samples indicated that the quantity of copper and ZIL remaining in the soils had no significant toxicity.ZIL amendment in a copper-contaminated soil was demonstrated as being a promising way to promote the valorization of phytoremediation plants.展开更多
Nitrate from the application of nitrogen-based fertilizers in intensive agriculture is a notorious waste product, though it lacks cost-effective solutions for its removal from potential drinking water resources. Catal...Nitrate from the application of nitrogen-based fertilizers in intensive agriculture is a notorious waste product, though it lacks cost-effective solutions for its removal from potential drinking water resources. Catalytic reduction appears to be a promising technique for converting nitrates to benign nitrogen gas. Mesoporous silica SBA-15 is a frequently used catalyst support that has large surface areas and highly ordered nanopores. In this work, mesoporous silica SBA-15 bimetallic catalysts for nitrate reduction were investigated. The catalyst was optimized for the selection of promoter metal (Sn and Cu), noble metal (Pd and Pt) and loading ratios of these metals at different temperatures and reduction conditions. The catalysts prepared were characterized by FT-IR, N2 physisorption, XRD, SEM, and ICP. All catalysts showed the presence of cylindrical mesoporous channels and uniform pore structures that remained even after metals loading. In the presence of a CO<sub>2</sub> buffer, the catalysts 4Pd-1Cu/SBA-15 and 1Pt-1Cu/SBA-15 reduced at 100?C under H2 and 1Pd-1Cu/SBA-15 reduced at 200°C under H2 demonstrated very high nitrate conversion. Furthermore, the forementioned Pd catalysts had higher N2 selectivity (88% - 87%) compared to Pt catalyst (80%). Nitrate conversion by the 4Pd-1Cu/SBA-15 catalyst was significantly decreased to 81% in the absence of CO<sub>2</sub>.展开更多
A spectrofluorimetric method for the direct analysis of carbendazim [methyl 2-benzimidazole carbamate (MBC)] fungicide and its metabolite 2-aminobenzimidazole (2-AB) in natural waters is described. Very low limit of d...A spectrofluorimetric method for the direct analysis of carbendazim [methyl 2-benzimidazole carbamate (MBC)] fungicide and its metabolite 2-aminobenzimidazole (2-AB) in natural waters is described. Very low limit of detection (LOD) and limit of quantification (LOQ) values of 0.002 - 0.06 ng/mL and 0.006 - 0.2 ng/mL, respectively, were determined by spectrofluorimetric method with small relative standard deviation (RSD) values < 1%. This spectrofluorimetric method was applied to the determination of MBC and 2-AB residues in natural waters, with satisfactory recovery values of (88.5% - 119.2%).展开更多
基金financially supported by the Nord-Pas-de-Calais Region Councilthe Ministry of Higher Education and Research+1 种基金the European Regional Development FundsAdib Kfoury acknowledges the“Pole Metropolitain Cote d'Opale”(PMCO)for its PhD financial support
文摘The constrained weighted-non-negative matrix factorization(CW-NMF)hybrid receptor model was applied to study the influence of steelmaking activities on PM_(2.5)(particulate matter with equivalent aerodynamic diameter less than 2.5μm)composition in Dunkerque,Northern France.Semi-diurnal PM_(2.5)samples were collected using a high volume sampler in winter 2010 and spring 2011 and were analyzed for trace metals,water-soluble ions,and total carbon using inductively coupled plasma–atomic emission spectrometry(ICP-AES),ICP-mass spectrometry(ICP-MS),ionic chromatography and micro elemental carbon analyzer.The elemental composition shows that NO_(3)^(-),SO_(4)^(2-),NH_4~+and total carbon are the main PM_(2.5)constituents.Trace metals data were interpreted using concentration roses and both influences of integrated steelworks and electric steel plant were evidenced.The distinction between the two sources is made possible by the use Zn/Fe and Zn/Mn diagnostic ratios.Moreover Rb/Cr,Pb/Cr and Cu/Cd combination ratio are proposed to distinguish the ISW-sintering stack from the ISW-fugitive emissions.The a priori knowledge on the influencing source was introduced in the CW-NMF to guide the calculation.Eleven source profiles with various contributions were identified:8 are characteristics of coastal urban background site profiles and 3 are related to the steelmaking activities.Between them,secondary nitrates,secondary sulfates and combustion profiles give the highest contributions and account for 93%of the PM_(2.5)concentration.The steelwork facilities contribute in about 2%of the total PM_(2.5)concentration and appear to be the main source of Cr,Cu,Fe,Mn,Zn.
基金the Atmosphere Protection Plan funded by the Environment, Planning and Housing Regional Agency (Nord-Pas-de-Calais)The “Unité de Chimie Environnementale et Interactions sur le Vivant”, UCEIV EA4492participates in the CLIMIBIO project, which is financially supported by the Hauts-de-France Region Council, the Ministry of Higher Education and Research, the European Regional Development Funds
文摘The influence of in-port ship emissions on gases and PM10 concentrations has been estimated in the port city of Calais, northern France, one of the busiest harbor in Europe, with numerous rotations of ferries or roll-on/roll-off cargo in average per day. NOx, SO2, O3 and PM10 concentrations were continuously measured over a three-month period, as well as real-time particle size distribution. A rural site located at Cape Gris-Nez, 20 km from Calais, was considered to deduce intrinsic contribution of ship emissions at the harbor city. The average concentrations of the studied species as well as the pattern of the conditional bivariate probability function at the two sites evidenced that in-port shipping, especially during the maneuvering operations, has an important influence on the NOx and SO2 concentrations. The impact of shipping in the harbor of Calais on average concentrations was estimated to 5l% for SO2, 35% for NO, 15% for NO2 and 2% for PM10 in the studied period. Concentration peaks of SO2 and NOx associated with an 03 depletion appeared synchronized with departures and arrivals of ferries. For winds blowing from the harbor, when compared to the background level, the number of particles appeared 10 times higher, with the highest differences in the 30-67 nm and the 109-167 nm size ranges. The average impact of in-port ships on PM10 concentrations was estimated to ＋28.9 μg/m^3 and concerned mainly the PM1 size fraction （40%）. Punctually, PM10 can potentially reach a concentration value close to 100μg/m^3.
基金supported by the Institut National du Cancer (INCa Convention no. 2010-368)+2 种基金the Hauts-de-France Region (Convention No. 14003399)the French Agency of the Environment and Energy (ADEME Convention no. 1494c008283-84)
文摘Particulate matter in ambient air constitutes a complex mixture of fine and ultrafine particles composed of various chemical compounds including metals, ions, and organics. A multidisciplinary approach was developed by studying physico-chemical characteristics and mechanisms involved in the toxicity of particulate atmospheric pollution. PM0.3-2.s and PM2.5 including ultrafine particles were sampled in Dunkerque, a French industrialized seaside city. PM samples were characterized from a chemical and toxicological point of view. Physico-chemical characterization evidenced that PM2.5 comes from several sources： natural ones, such as soil resuspension and marine sea-salt emissions, as well as anthropogenic ones, such as shipping traffic, road traffic, and industrial activities. Human BEAS-2B tung cells were exposed to PM0.3-2.5, or to the Extractable Organic Matter （EOM） of PM0.3-2.5 and PM2.s. These exposures induced several mechanisms of action implied in the genotoxicity, such as oxidative DNA adducts and DNA Damage Response. The toxicity of PM-EOM was higher for the sample including the ultrafine fraction （PM2.5） containing also higher concentrations of polycyclic aromatic hydrocarbons. These results evidenced the major role of organic compounds in the toxicity of PM.
基金funded by the Research Council and the Faculty of Sciences of Saint Joseph University of Beirut–LebanonThe“Unitéde Chimie Environnementale et Interactions sur le Vivant”(UCEIV-UR4492)participates in the CLIMIBIO project,which is financially supported by the Hauts-de-France Region Council,the French Ministry of Higher Education and Researchthe European Regional Development Funds。
文摘Primary and secondary organic aerosols in PM_(2.5)were investigated over a one-year campaign at Zouk Mikael and Fiaa,Lebanon.The n-alkanes concentrations were quite similar at both sites(26-29 ng/m^(3))and mainly explained by anthropogenic emissions rather than natural ones.The concentrations of total Polycyclic Aromatic Hydrocarbons(PAHs)were nearly three times higher at Zouk Mikael(2.56 ng/m^(3))compared to Fiaa(0.95 ng/m^(3)),especially for indeno[1,2,3-c,d]pyrene linked to the presence of the power plant.A characteristic indeno[1,2,3-c,d]pyrene/(indeno[1,2,3-c,d]pyrene+benzo[g,h,i]perylene)ratio in the range0.8-1.0 was determined for heavy fuel oil combustion from the power plant.Fatty acids and hopanes were also investigated and were assigned to cooking activities and vehicular emissions respectively.Phthalates were identified for the first time in Lebanon with high concentrations at Zouk and Fiaa(106.88 and 97.68 ng/m^(3) respectively).Moreover,the biogenic secondary aerosols revealed higher concentrations in summer.The total terpene concentration varied between 131 ng/m^(3) at Zouk Mikael in winter to 469 ng/m3 at Fiaa in summer.Additionnally,the concentrations of the dicarboxylic acids especially for adipic and phthalic acids were more influenced by anthropogenic sources.The analysis of molecular markers and diagnostic ratios indicated that the sites were strongly affected by anthropogenic sources such as waste open burning,diesel private generators,cooking activities,road transport,power plant,and industrial emissions.Moreover,results showed different pattern during winter and summer seasons.Whereas,higher concentrations of biogenic markers were clearly encountered during the summer period.
文摘Iron-containing SBA-15 catalysts have been prepared following different synthesis routes, direct synthesis by adjusting pH at 3 and 6 and with post synthesis procedure. Activity and stability of these materials were assessed on the photo-Fenton degradation of phenolic aqueous solutions by H2O2 using near ultraviolet irradiation （254 nm） at room temperature and initial neutral pH. Their catalytic performance was mentioned in terms of phenol and TOC （total organic carbon） conversions. Several complementary techniques, including X-ray, nitrogen sorption isotherms, UV （Ultraviolet） visible, were used to evaluate the final structural and textural properties of calcined Fe-SBA 15 materials. These materials show a high activity and stability of iron species.
文摘Mycosphaerella graminieola （anamorph： Zymoseptoria tritici） is the causal agent of Septoria tritici blotch, the most frequently occurring disease on wheat crops worldwide. A set of 163 monoconidial isolates of this fungus were sampled in 2012 from five geographical locations of Tunisia （Bizerte, B6ja, Kef, Jendouba and Siliana） in order to examine the status of strobilurin resistance of M. graminicola in this country. The resistance was assessed by using PCR-based mismatch mutation assay that determined the cytochrome b substitution G143A responsible for strobilurin resistance. All isolates were found sensitive since they possessed the wild-type allele G143 conferring sensitivity. This study confirms previous reports on the fungus in Tunisia and reveals that the Tunisian population of M. graminicola remains fully sensitive to strobilurin fungicides. An appropriate management of strobilurin applications in Tunisia is thereby recommended to prevent local development and widespread of resistance, as in Europe, where pathogen populations are fully resistant to strobilurins today.
文摘This study aims to investigate the ability of an imidazolium biobased Zwitterionic Ionic Liquids(ZILs)in enhancing the phytoavailability of copper from garden(G)and vineyard(V)soils using the model plant ryegrass.Uncontaminated and artificially contaminated CuSO_(4) soils,unamended and ZIL-amended soil modalities were designed.The copper/ZIL molar ratio(1/4)introduced was rationally established based on molecular modeling and on the maximal copper concentration in artificially contaminated soil.Higher accumulation of copper in the shoots was detected for the uncontaminated and copper contaminated ZIL amended V soils(18.9 and 23.3 mg/kg,respectively)contrary to G soils together with a ZIL concentration of around 3%(W/W)detected by LC-MS analyses.These data evidenced a Cu-accumulation improvement of 38%and 66%compared to non-amended V soils(13.6 and 13.9 mg/kg respectively).ZIL would be mainly present under Cu(II)-ZIL_(4) complexes in the shoots.The impact on the chemical composition of shoot was also studied.The results show that depending on the soils modalitity,the presence of free copper and/or ZIL led to different chemical compositions in lignin and monomeric sugar contents.In the biorefinery context,performances of enzymatic hydrolysis of shoots were also related to the presence of both ZIL and copper under free or complex forms.Ecotoxicity assessment of the vineyard soil samples indicated that the quantity of copper and ZIL remaining in the soils had no significant toxicity.ZIL amendment in a copper-contaminated soil was demonstrated as being a promising way to promote the valorization of phytoremediation plants.
文摘Nitrate from the application of nitrogen-based fertilizers in intensive agriculture is a notorious waste product, though it lacks cost-effective solutions for its removal from potential drinking water resources. Catalytic reduction appears to be a promising technique for converting nitrates to benign nitrogen gas. Mesoporous silica SBA-15 is a frequently used catalyst support that has large surface areas and highly ordered nanopores. In this work, mesoporous silica SBA-15 bimetallic catalysts for nitrate reduction were investigated. The catalyst was optimized for the selection of promoter metal (Sn and Cu), noble metal (Pd and Pt) and loading ratios of these metals at different temperatures and reduction conditions. The catalysts prepared were characterized by FT-IR, N2 physisorption, XRD, SEM, and ICP. All catalysts showed the presence of cylindrical mesoporous channels and uniform pore structures that remained even after metals loading. In the presence of a CO<sub>2</sub> buffer, the catalysts 4Pd-1Cu/SBA-15 and 1Pt-1Cu/SBA-15 reduced at 100?C under H2 and 1Pd-1Cu/SBA-15 reduced at 200°C under H2 demonstrated very high nitrate conversion. Furthermore, the forementioned Pd catalysts had higher N2 selectivity (88% - 87%) compared to Pt catalyst (80%). Nitrate conversion by the 4Pd-1Cu/SBA-15 catalyst was significantly decreased to 81% in the absence of CO<sub>2</sub>.
基金the Service of Cooperation and Cultural Action of the Embassy of France for financial support
文摘A spectrofluorimetric method for the direct analysis of carbendazim [methyl 2-benzimidazole carbamate (MBC)] fungicide and its metabolite 2-aminobenzimidazole (2-AB) in natural waters is described. Very low limit of detection (LOD) and limit of quantification (LOQ) values of 0.002 - 0.06 ng/mL and 0.006 - 0.2 ng/mL, respectively, were determined by spectrofluorimetric method with small relative standard deviation (RSD) values < 1%. This spectrofluorimetric method was applied to the determination of MBC and 2-AB residues in natural waters, with satisfactory recovery values of (88.5% - 119.2%).
