Based on commercially available polyvinyl alcohol (PVA) stabilised polyvinyl acetate (PVAc), emulsion adhesives are neither heat nor moisture-resistant and show weak strength at high relative humidity and high tempera...Based on commercially available polyvinyl alcohol (PVA) stabilised polyvinyl acetate (PVAc), emulsion adhesives are neither heat nor moisture-resistant and show weak strength at high relative humidity and high temperatures. Pre- or post-crosslinking is another method used to manufacture a conventional vinyl-based homopolymers or copolymers system with improved water resistance. Vinyl neodecanoate (VeoVa), N-methylolacrylamide (NMA), Methacrylamide, methacrylic acid (MAA), and other self-crosslinking comonomers are typically inserted to produce highly water-resistant vinyl based homopolymers or copolymers. Additionally, organic crosslinkers like glyoxal, glutaraldehyde, citric acid, tartaric acid, and the like, as well as inorganic crosslinkers like acidic metal salts like aluminium chloride, aluminium nitrate, boric acid, and the like, can be used to prepare the highly water-resistant vinyl based homopolymers or copolymers. It is also possible to combine the self-crosslinking comonomers with the organic crosslinkers. Recently, a different hybrid chemistry has been developed that improves lap shear strength, has outstanding water resistance, good durability, and doesn’t require any additional crosslinker agents. Two distinct polymers were combined to develop hybrid polymers. They usually involve mixing an organic polymer with a polymer. There are many capping agents that are used for polyurethanes to produce acrylics that are capped with polyurethane and used as an oligomer in PVAc wood glue. Here, in this paper, we reviewed the different hybrid chemistry based on polyurethane chemistry for wood bonding applications.展开更多
BACKGROUND The reference ranges for biochemical parameters can fluctuate due to factors like altitude,age,gender,and socioeconomic conditions.These values are crucial for interpreting laboratory data and guide clinica...BACKGROUND The reference ranges for biochemical parameters can fluctuate due to factors like altitude,age,gender,and socioeconomic conditions.These values are crucial for interpreting laboratory data and guide clinical treatment decisions.Currently,there is no established set of reference intervals for cord blood biochemical parameters of newborns in India,particularly in Mumbai.AIM To create cord blood biochemical parameters reference intervals specifically for Mumbai,India.METHODS A cross-sectional study was conducted in an Indian tertiary care hospital.This study focused on healthy newborns with normal birth weight,born to pregnant mothers without health issues.Cord blood samples,approximately 2-3 mL in volume,were collected from 210 term neonates.These samples were divided into fluoride(glucose)and clot activator(serum)tubes and were subsequently analyzed in the institute's biochemical laboratory.The data obtained from the analysis was then subjected to statistical analysis.The result of the Shapiro-Wilk test suggested non-normality in the data distribution.Consequently,nonparametric statistics were utilized for analysis.The Mann-Whitney U test was utilized to compare parameter distributions among different factors,including the infant’s sex,delivery method,maternal age,and obstetric history.A significance level of P<0.05 was considered to indicate statistical significance.RESULTS The following represent the median figures and central 95 percentile reference intervals for biochemical parameters in umbilical cord blood of newborns:Serum direct bilirubin=(0.1-0.55)mg/dL,indirect bilirubin=(0.64-2.26)mg/dL,total bilirubin=(0.62-3.14)mg/dL,creatinine=(0.27-0.76)mg/dL,sodium=(128.19-143.26)mmol/L,chloride=(100.19-111.68)mmol/L,potassium=(1.62-9.98)mmol/L and plasma glucose=(24.75-94.23)mg/dL.Statistically significant differences were observed in serum sodium,potassium,and plasma glucose levels when comparing delivery modes.CONCLUSION This is the pioneering study in which first time,the biochemical reference intervals in cord blood for newborns are established in western India.The values are applicable for newborns from this area.Larger study throughout the country is required.展开更多
BACKGROUND Cotadutide(MEDI0382)is a twincretin that acts as an agonist for both the glucagon-like peptide-1 and glucagon receptors.Several randomized controlled trials(RCTs)have been published evaluating the use of co...BACKGROUND Cotadutide(MEDI0382)is a twincretin that acts as an agonist for both the glucagon-like peptide-1 and glucagon receptors.Several randomized controlled trials(RCTs)have been published evaluating the use of cotadutide in individuals with type 2 diabetes(T2D),showing promising results.However,the efficacy and safety of the drug use have been inadequately explored by systematic reviews and meta-analyses.AIM To assess the clinical efficacy and safety of cotadutide in individuals with T2D having overweight or obesity.METHODS The systematic reviews and meta-analyses have been registered with International Prospective Register of Systematic Reviews(CRD42024511703),and the protocol summary can be accessed online.Several databases and registries,including MEDLINE(via PubMed),Scopus,Web of Science,the Cochrane Central Register of Controlled Trials,and ClinicalTrials.gov,were systematically searched using related terms from their inception to May 15,2025,for RCTs involving individuals with T2D receiving cotadutide in the intervention group.Review Manager web was used to conduct meta-analysis using random-effects models.The co-primary outcomes of interest were the changes in glycated hemoglobin(HbA1c)and the percent changes in body weight from baseline.The results of the outcomes were expressed as mean differences(MDs)or risk ratios(RRs)with 95%confidence intervals(CIs).The analysis of outcomes was stratified according to whether the control group received a placebo,denoted as the placebo control group(PCG),or an active comparator,referred to as the active control group(ACG).RESULTS Nine RCTs(mostly phase 2 RCTs,n=1525)with study durations varying from 28 days to 54 weeks that met all the inclusion criteria were analyzed;five studies had a low overall risk of bias,while the other four had some concerns.Compared to the PCG,greater reductions in HbA1c were achieved with cotadutide 100μg(MD-0.77%,95%CI:-1.06 to-0.47),200μg(MD-0.68%,95%CI:-1.12 to-0.23),300μg(MD-0.67%,95%CI:-0.79 to-0.56),and 600μg(MD-0.69%,95%CI:-0.97 to-0.41).Cotadutide 100μg(MD-1.74%,95%CI:-3.23 to-0.25),200μg(MD-2.56%,95%CI:-3.37 to-1.75),300μg(MD-3.49%,95%CI:-4.14 to-2.84),and 600μg(MD-5.45%,95%CI:-7.17 to-3.73)achieved greater percent reductions in body weight from baseline.However,the certainty of evidence for HbA1c and percent body weight reductions was very low to low.Cotadutide,at all doses,also outperformed PCG in reducing fasting plasma glucose and absolute body weight.The changes in HbA1c,percent body weight,fasting plasma glucose,and absolute body weight were similar between the cotadutide group and the ACG.Compared to PCG,pooled doses of cotadutide increased the risks of treatment-emergent adverse events(AEs),treatment-related AEs,and discontinuation of the study drug due to AEs,but not for serious AEs.More subjects experienced overall gastrointestinal AEs,dyspepsia,nausea,vomiting,constipation,and decreased appetite with cotadutide than with PCG.Compared to the ACG,none of the AEs showed increased risk in the cotadutide group.CONCLUSION Cotadutide demonstrated glycemic control and weight-loss benefits in short-term,small RCTs(mostly phase 2).However,small sample sizes,very low to low certainty of evidence,and the absence of data on long-term cardiovascular and renal outcomes highlight substantial uncertainties,warranting cautious interpretation and further investigation in larger,longer-term trials to establish its safety and efficacy profile.展开更多
Flow based Erosion e corrosion problems are very common in fluid handling equipments such as propellers, impellers, pumps in warships, submarine. Though there are many coating materials available to combat erosionecor...Flow based Erosion e corrosion problems are very common in fluid handling equipments such as propellers, impellers, pumps in warships, submarine. Though there are many coating materials available to combat erosionecorrosion damage in the above components, iron based amorphous coatings are considered to be more effective to combat erosionecorrosion problems. High velocity oxy-fuel(HVOF)spray process is considered to be a better process to coat the iron based amorphous powders. In this investigation, iron based amorphous metallic coating was developed on 316 stainless steel substrate using HVOF spray technique. Empirical relationships were developed to predict the porosity and micro hardness of iron based amorphous coating incorporating HVOF spray parameters such as oxygen flow rate, fuel flow rate, powder feed rate, carrier gas flow rate, and spray distance. Response surface methodology(RSM) was used to identify the optimal HVOF spray parameters to attain coating with minimum porosity and maximum hardness.展开更多
Tetrahydrocurcumin(THC)is one of the major metabolites of curcumin(CUR),an ancient bioactive natural polyphenolic compound.This research article describes both the solid and liquid state characterization of THC using ...Tetrahydrocurcumin(THC)is one of the major metabolites of curcumin(CUR),an ancient bioactive natural polyphenolic compound.This research article describes both the solid and liquid state characterization of THC using advanced spectroscopic and thermo-analytical techniques.Anti-inflammatory,anti-oxidant,and neuroprotective activities of THC were investigated using in vitro cell lines.Liquid chromatography-mass spectrometry analysis revealed that our sample comprised 95.15%THC,0.51%tetrahydrodemethoxycurcumin(THDC),3.40%hexahydrocurcumin,and 0.94%octahydrocurcumin.Gas chromatography-mass spectrometry analysis indicated the presence of 96.68%THC and 3.32%THDC.THC in solution existed as keto-enol tautomers in three different forms at different retention time,but the enol form was found to be dominant,which was also supported by nuclear magnetic resonance analysis.THC was thermally stable up to 335.55C.THC exhibited more suppression of cytokines(TNF-a,IL-1b,and MIP-1a)than CUR in a concentration-dependent manner in mouse splenocytes,while NK-cell and phagocytosis activity was increased in macrophages.THC showed a significant reduction of free radicals(LPO)along with improved antioxidant enzymes(SOD and catalase)and increased free radical scavenging activity against ABTSt radicals in HepG2 cells.THC displayed higher protection capability than CUR from oxidative stress and neuronal damage by improving cell viability against H2O2 induced HepG2 cells and MPPt induced SH-SY5Y cells,respectively,in a concentration-dependent manner.Thus,a variation of the biological activities of THC might rely on its keto-enol form and the presence of other THC analogs as impurities.The present study could be advantageous for further research on THC for better understanding its physicochemical properties and biological variation.展开更多
Due to their lower environmental impact, ease of accessibility, low cost, and biodegradability, bio-renewable sources have been used extensively in the last several decades to synthesize adhesives, substituting petroc...Due to their lower environmental impact, ease of accessibility, low cost, and biodegradability, bio-renewable sources have been used extensively in the last several decades to synthesize adhesives, substituting petrochemical-based adhesive. Vegetable oils (including palm, castor, jatropha, and soybean oils), lactic acid, potato starch, and other bio-renewable sources are all excellent sources for the synthesis of adhesives that are being taken into consideration for the synthesis of “eco-friendly” adhesives. Due to their widespread use, accessibility, affordability, and biodegradability, biobased raw materials like carbohydrates used to synthesize wood and wood composite adhesive have gradually replaced petrochemical-based adhesive. Recently, xanthan gum, a naturally occurring polymer, has drawn the interest of scientists as a potentially petroleum source replacement. It possesses specific rheological characteristics, excellent water solubility, and stability to heat, and can be used as a binder, thickener, suspending agent, and stabilizer. Xanthan gum increases the adhesive strength in addition to increasing the viscosity of water-soluble adhesives. This article discusses xanthan gum as a potential substitute for traditional raw materials derived from petroleum that is used as a raw material for adhesives.展开更多
The influence of overlap multi-pass friction stir processing on the microstructure and the mechanical properties, in particular, strength, ductility and hardness of die cast A1-7Si-3Cu aluminum alloy was investigated....The influence of overlap multi-pass friction stir processing on the microstructure and the mechanical properties, in particular, strength, ductility and hardness of die cast A1-7Si-3Cu aluminum alloy was investigated. It was observed that increase in the number of overlap passes friction stir processing resulted in significant refinement and redistribution of aluminum silicon eutectic phase and elimination of casting porosities. The microstructural refinement by the friction stir processing not only increases the ultimate tensile strength from 121 to 273 MPa, but also increases the ductility as observed by the increase in fracture strain from 1.8% to 10%. Analysis of the fractured surface reveals that the microstructural refinement obtained by friction stir processing plays a vital role in transforming the fracture mode from completely mixed mode to the ductile mode of the fracture with increasing number of passes. The change in the size, shape, morphology and distribution of eutectic silicon particles and elimination of the porosities are the main reasons for the increases in tensile strength and ductility due to friction stir processing.展开更多
This article reports modeled ice thickness distribution and total ice volume of the 65 selected glaciers(>0.5 km^2)of Chandra basin,located in the Western Himalayas.This is a first-of-its-kind study that gives deta...This article reports modeled ice thickness distribution and total ice volume of the 65 selected glaciers(>0.5 km^2)of Chandra basin,located in the Western Himalayas.This is a first-of-its-kind study that gives detailed insights about the current ice thickness distribution at an individual glacier level in the Western Himalayas.The estimates are obtained using an optimally parameterized Glab Top2_IITB[Glacier Bed Topography Indian Institute of Technology Bombay(IITB)version]model with highresolution Digital Elevation Model(DEM)as an input.The total estimated volume of all the 65 selected glaciers is about 55.32 km^3 covering a total area of about 591.03 km^2.Using hypsometric analysis,it is found that the maximum amount of ice volume,i.e.,about 12.79 km^3,is currently residing at the elevation range of 5200–5400 m a.s.l.Ice thickness estimates obtained in the current study are compared with the ensemble estimates obtained in the Global Glacier Thickness Initiative(G2TI)project for three large glaciers,namely,Bada Shigri,Samudra Tapu,and Gepang Gath glaciers.The obtained results indicate that the difference between both the studies is marginal in terms of mean ice thickness and maximum ice thickness estimates except Samudra Tapu glacier.Moreover,the uncertainty of the estimated glacier ice volume from this study is about±15%whereas,from the G2TI project,it is about 25%.The main reasons for the difference could be the quality of the inputs used,model structure,model parameterization as well as the time stamp of the input used.The obtained results from this study indicate that the use of appropriate shape factor and better DEM would result in more reliable glacier ice thickness estimates even by using a simple slopedependent model like Glab Top2_IITB.展开更多
Here we demonstrate the fabrication, electrochemical performance and application of an asymmetric supercapacitor (AS) device constructed with ss-Ni(OH)(2)/MWCNTs as positive electrode and KOH activated honeycomb-like ...Here we demonstrate the fabrication, electrochemical performance and application of an asymmetric supercapacitor (AS) device constructed with ss-Ni(OH)(2)/MWCNTs as positive electrode and KOH activated honeycomb-like porous carbon (K-PC) derived from banana fibers as negative electrode. Initially, the electrochemical performance of hydrothermally synthesized ss-Ni(OH)(2)/MWCNTs nanocomposite and K-PC was studied in a three-electrode system using 1 M KOH. These materials exhibited a specific capacitance (Cs) of 1327 Fig and 324 F/g respectively at a scan rate of 10 mV/s. Further, the AS device i.e., ss-Ni(OH)(2)/MWCNTs// K-PC in 1 M KOH solution, demonstrated a Cs of 156 F/g at scan rate of 10 mV/s in a broad cell voltage of 0-2.2 V. The device demonstrated a good rate capability by maintaining a Cs of 59 F/g even at high current density (25 A/g). The device also offered high energy density of 63 Wh/kg with maximum power density of 5.2 kW/kg. The AS device exhibited excellent cycle life with 100% capacitance retention at 5000th cycle at a high current density of 25 A/g. Two AS devices connected in series were employed for powering a pair of LEDs of different colors and also a mini fan. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.展开更多
Failure analysis and fatigue life prediction are very important in the design procedure to assure the safety and reliability of rubber components. The fatigue life of a railway elastomeric pad is predicted by combinin...Failure analysis and fatigue life prediction are very important in the design procedure to assure the safety and reliability of rubber components. The fatigue life of a railway elastomeric pad is predicted by combining the test of material properties and finite element analysis (FEA). The specially developed chloroprene rubber material’s fatigue life equation is acquired based on uniaxial tensile test and fatigue life tests performed on the dumbbell specimens of the chloroprene rubber. The same chloroprene rubber was developed at Indian Rubber Manufacturer’s Research Association, Thane. The strain distribution contours and the maximum total principal strains of the elastomeric pad at different compressive loads are obtained using finite element analysis method. The software used for the FEA was ANSYS. The three parameter nonlinear hyperelastic Mooney-Rivlin Model and plane 182 elements were used for finite element analysis. The critical region cracks prone to arise are obtained and analysed. Then the maximum first principal elastic strain was used as the fatigue damage parameter, which is substituted in the chloroprene rubber’s fatigue life equation, to predict the fatigue life of an elastomeric pad in the number of cycles at different compressive loads. The results were compared with the technical requirements given by Indian Railway’s Research Designs and Standards Organization. These requirements were achieved up to certain extents. The results were also compared with the data available in the literature and a similarity was observed between the results acquired and literature data. In short, the proposed fatigue life prediction method can shorten the product design cycle, decrease the design and product cost remarkably and improve the quality of an elastomeric pad.展开更多
Silver nanoparticles were synthesized by chemical reduction method. The Ag nanoparticles (AgNP) were characterized using UV-Vis spectroscopy which shows an absorption band at 420 nm confirming the formation of nanopar...Silver nanoparticles were synthesized by chemical reduction method. The Ag nanoparticles (AgNP) were characterized using UV-Vis spectroscopy which shows an absorption band at 420 nm confirming the formation of nanoparticles. For any practical application of the silver nanoparticles it is necessary to stabilize it which can be done by making a composite. In the present studies three polymers were chosen such that AgNP could be put to some practical use. Polyvinyl Alcohol (PVA), Polypyrrole (Ppy) and Carboxymethyl cellulose (CMC) are important for use in textiles, electronics and food/drug technologies respectively. Polymeric composites of PVA, PPy, and CMC were prepared by mixing the aqueous solutions of the respective polymers and the colloidal suspension of preformed silver nanoparticles. Various compositions containing 1% to 5% of Ag nanoparticles were prepared. Thin films of these composites were characterized by UV-Vis spectroscopy, X-ray diffraction and Scanning electron microscopy. X-ray diffraction showed the presence of the peaks at 2θ values of 38.1°, 44.2°, 64.4 and 78.2° corresponding to cubic phase of silver metal. SEM photographs revealed the presence of Ag nanoparticles of sizes varying from 40 to 80 nm. The electrical conductivity of these materials was studied using the four probe method. The conductivity was found to increase from 10–6 for control samples to 10–3 S/cm after the formation of the nanocomposites.展开更多
The samples of microdiamond as an inclusion of Os Ir alloy, coesite, stishovite, high pressure form of Tio2, high pressure nitrides associated with SiC along with boron carbide, have been reported in the past from the...The samples of microdiamond as an inclusion of Os Ir alloy, coesite, stishovite, high pressure form of Tio2, high pressure nitrides associated with SiC along with boron carbide, have been reported in the past from the placer deposits of Luobasa ophiolite of Yarlung Zangbo region of Tibet. For the formation of these ultra high findings, pressure in the range of 4 to 9 Gpa and temperature in the range of 700° C - 1300° C is required. Thus these minerals can either be incorporated into the chromitite in the deep upper mantle or they have an impact origin. In absence of impact crater, Prof. Fang and others have favored the mantle origin but for the formation of nitrides in the deep mantle, the source of N is not clear. However, the event of comet impact provides better explanation for the formation process. It also simplifies the explanation of coexistence of most of these minerals in a single crystal with the shallow origin and the perfect preservation of the coesite as consequence of rapid cooling after the shock metamorphism.展开更多
In the terrestrial planet zone, Comets start outgassing due to solar radiation. This can make comet composition fragile enough to break under the gravitational gradient. Examples like those of Comet Shoemaker-Levy 9 [...In the terrestrial planet zone, Comets start outgassing due to solar radiation. This can make comet composition fragile enough to break under the gravitational gradient. Examples like those of Comet Shoemaker-Levy 9 [1] show that it is not unusual for comets to disintegrate due to gravitational gradients. In the event of an impact of such a disintegrated comet on earth, multiple coherent impact craters will be distributed over a large area. The low-density porous composition of the comet will result in the formation of “large flat-floored craters” spread over a large area with a network of faults and fractures as described by Roddy and co-workers (Roddy, 1976;Roddy et al., 1977) [2] [3]. Due to its unusual appearance these impacts patterns are different than rock/metal asteroid impact craters. As a result, these sites are difficult to identify. There are multiple such sites on the planet earth which are under study for impact but due to complex nature of comet impact craters, they have been a conundrum for some time. One such possible site matching the comet impact features can be observed in the southern Tibet between the latitudes of 82°30'E and 90°30'E and 29°N and 33°N. This study indicates that the lakes in this region were formed by the impact of a single disintegrating comet that hit the region. Observation indicates that the lakes are unusually closely aligned and have a steep slope facing circular feature on the eastern side. Fractures and faults connecting these lakes can be observed over entire subject site hinting towards the multiple impact craters. These craters are large flat-floored and spread over a large area. Gravitational anomaly in the lake region along with the presence of Ultra High Pressure (UHP) minerals like cubic Born Nitride, micro-diamond with the inclusion of Platinum Group Elements (PGE), coesite, Stishovite, osbornite and other complex finds in the region support the possibility of impact.展开更多
In southern Tibet, there is a series of lakes in the region (82°30'E, 29°N and 90°30'E, 33°N). This study indicates that these lakes were formed by the impact of a single disint...In southern Tibet, there is a series of lakes in the region (82°30'E, 29°N and 90°30'E, 33°N). This study indicates that these lakes were formed by the impact of a single disintegrating comet that hit the region. Observation indicates that the lakes are unusually closely aligned and have a steep slope facing circular feature on the eastern side. Fractures and faults connecting these lakes can be observed over entire subject site hinting towards the multiple impact craters. The terrain is uneven and lakes are partially filled hence in some cases do not look like circular or elliptical. These lakes vary from 1 Km to 65 Km in diameter and are linearly aligned around a single line. Studies of deuterium by Yuan et al. (2011) [1] indicate an abrupt 4‰ increase in δ18O in middle Holocene period around 6000 years ago. The study indicates that the region is rich in diamond, Coesite, Platinum Group Elements (PGE), Stishovite, tektites, and other complex alloys, as would be expected from a high energy impact of an extraterrestrial object. The possibility of the impact as one of the reasons for the diamond in this region was also suggested by Wen-Ji Bai and Qing-Song Fang (2007) [2]. However in absence of definitive evidence they favoured mantle origin. Two possible reasons of absence of impact signature are source of sample and impact pattern. First is the source of the sample which is collected from the river beds of Yarlung-Zangbo Suture Zone of Tibet which is believed to be the origin of this diamond, however it ignores the fact that these rivers get water from lakes which are in the proposed impact zone and the second reason is the impact-pattern spread over close to 800 km which is not expected from the asteroid impact. It will therefore be prudent to test samples from the lake region to understand surface distortion features to confirm the impact. Based on satellite imagery major industrial development supported by road infrastructure in the subject region near lakes and rivers originating from these lakes can be observed hinting towards placer mining activity associated with lakes (craters). Our study suggests that the diamonds, Platinum Group Elements, Stishovite and other alloys harvested from the region should be considered as comet impact diamonds rather than those created in the interior of the earth.展开更多
<span style="font-family:Verdana;">The present work encompasses identification and characterization of major degradation product (DP) of OSM observed in base hydrolytic stress study. The separation of ...<span style="font-family:Verdana;">The present work encompasses identification and characterization of major degradation product (DP) of OSM observed in base hydrolytic stress study. The separation of DP was carried out on a non-polar stationary phase by using high-performance liquid chromatography system (HPLC). Using waters X-bridge (250 mm × 4.6 mm, 5 μm) C18 column with gradient elution program. For the characterization study, stress samples were subjected to HPLC and UPLC-QTOF-MS/MS and based on mass fragmentation pattern</span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">,</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> plausible structure was deduced. Further</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">,</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> the DP was isolated using semi-prepara</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">- </span></span></span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;">tive liquid chromatography and concentrated the fractions using lyophiliza</span><span style="font-family:Verdana;">tion. The isolated DP was subjected to extensive 1D (1H, 13C, and</span><span style="font-family:Verdana;"> DEPT-135) and 2D (COSY, HSQC and HMBC) nuclear magnetic resonance (NMR) studies to authenticate the structure. The impurity was unambiguously named as N-(2-((2-(dimethylamino)ethyl)(methyl)amino)-4-metho</span></span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">-</span></span></span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;">xy-5-((4-(1-methyl-1H-indol-3-yl)pyrimidin-2-yl)amino)phenyl)-3-methoxy</span><span style="font-family:Verdana;">propanamide.</span></span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">Add</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">- </span></span></span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;">itionally, the </span><i><span style="font-family:Verdana;">In-Silico</span></i><span style="font-family:Verdana;"> structure activity relation (QSAR) assessed through sta</span></span></span></span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;">tistical based software’s DEREK Nexus</span><sup><span style="font-family:Verdana;">TM</span></sup><span style="font-family:Verdana;">, and MultiCASE, Case Ultra</span><sup><span style="font-family:Verdana;">TM</span></sup></span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> widely accepted and respected software’s for DP and OSM</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">.</span></span></span>展开更多
Currently, due to scarcity of hydrocarbon resources and the extensive use of water based, solvent based and hot melt adhesives in wood bonding in furniture industries and packaging industries that demand recyclability...Currently, due to scarcity of hydrocarbon resources and the extensive use of water based, solvent based and hot melt adhesives in wood bonding in furniture industries and packaging industries that demand recyclability, compostability and bio-degradability, recently attention has been concentrated to making these formulations completely bio-based, sustainable and biodegradable. Biodegradable hot melt adhesives (HMAs) prepared from natural sources have a potential for use in furniture and packaging industries because of an increase in awareness of environmental issues, the replacement of conventional petroleum-derived hydrocarbon raw materials by renewable, biodegradable and sustainable materials has developed. In terms of environmental issues, such as climate crisis due to an increase of carbon dioxide emission, attempts have been made to produce HMAs using non-hydrocarbon resins, such as polylactic acid (PLA)-based resins, containing no petroleum as a raw material. Polylactic acid was prepared by self-condensation reactions of lactic acid or by lactide ring opening polymerisation, and used for packaging materials, sanitary pads, diapers etc., especially adhesives owing to its excellent processability and the excellent mechanical properties of its HMAs products. Therefore, recently the use of PLA materials as a substitute for non-biodegradable hydrocarbon-based polymers can be considered to be environmentally favourable. Here, we discussed the various uses of PLA as a sustainable and bio-degradable and sustainable hot melt adhesive.展开更多
White glues, also referred to as polyvinyl acetate (PVAc) adhesives, are thermoplastics that soften when heated to a specific degree and re-harden when cooled. For general assembly tasks in the joinery business, such ...White glues, also referred to as polyvinyl acetate (PVAc) adhesives, are thermoplastics that soften when heated to a specific degree and re-harden when cooled. For general assembly tasks in the joinery business, such as edge gluing, wood veneer, and edge bonding, white glues have been used. White glue requires a prolonged setting time to achieve adequate handling strength as it solidifies through evaporation or absorption of water by the wood. Cold press and hot press techniques are used to bond wood substrates. Recently, white glue is frequently used as a wood adhesive with dielectric heating systems to prevent this and enhance production speeds. Radio frequency (RF) curing is merely a technique for heating glue lines in wood-to-wood joints. It considered a source of heat, like steam and electricity. In order to bond wood substrates with the least amount of clamping time, the RF produces a very rapid, uniform rise in temperature. In this review paper, we discussed the radio frequency curing technique, their mechanism and troubleshooting to achieve perfect wood bond in joinery segment.展开更多
We all negotiate,formally or informally,in jobs,in day today lives and outcomes of negotiations affect those processes of life.Although negotiation is an intrinsic nature of human psyche,it is very complex phenomenon ...We all negotiate,formally or informally,in jobs,in day today lives and outcomes of negotiations affect those processes of life.Although negotiation is an intrinsic nature of human psyche,it is very complex phenomenon to implement using computing and internet for the various purposes in E Commerce.Automation of negotiation process poses unique challenges for computer scientists and researchers,so here we study how negotiation can be modeled and analyzed mathematically,what can be different techniques and strategies or set of rules/protocols to be implemented and how they can be relevantly implemented.We are in a quest to find out how this complex process,which involves human psyche can be automated using computers and modern day technologies.Now,the quest is not only automation,looking at the research in the related field in last ten years;but it is all about finding solutions to make e-negotiation more efficient and more accurate,as well as useful in any kind of electronic trading situations.Here is an attempt to consolidate our work of last few years on automation of negotiation process;we call it as negotiation protocol on research,study as well as implementation level of negotiation automation.Overall,we are trying to give few solutions to make the automation more efficient.展开更多
Context: Bitter melon (Momoradica charantia) is one of the well-known plants used for lowering blood glucose since antiquity. Aims: To compare the efficacy and safety of PDM011011 capsule (1200 mg/day) with Metformin ...Context: Bitter melon (Momoradica charantia) is one of the well-known plants used for lowering blood glucose since antiquity. Aims: To compare the efficacy and safety of PDM011011 capsule (1200 mg/day) with Metformin (1000 mg/day) in a 15 weeks study using mean change in fasting plasma glucose (FPG) and Hb1Ac% in subjects with type 2 diabetes mellitus (T2DM). Settings and Design: This is an open-label, randomized, active-controlled, multicentric, phase III study. Methods and Material: A total of 123 eligible patients were randomized in 2:1 ratio in PDM011011 and Metformin arm. Total 83 subjects received PDM011011 capsule (1200 mg/day) and 40 subjects received Metformin (1000 mg/day) in their respective arms for 15 weeks. Subjects were analyzed for FPG and Hb1Ac% at baseline and during treatment visits (Visit 3 to Visit 7). Safety assessments were carried out. Results: In this study, the significant reduction in mean FPG level was observed after treatment with PDM011011 capsule and Metformin in T2DM patients. The mean change from baseline to week 15 in FPG was 14.52 mg/dL (95% CI: 6.36, 22.67) in the PDM011011-treated subjects and 28.34 mg/dL (95% CI: 21.35, 35.32) in the Metformin-treated subjects. At week 15, the mean change from baseline in HbA1c levels was 0.27% (95% CI: 0.06, 0.47) in the PDM011011 arm and 0.62% (95% CI: 0.40, 0.83) in the Metformin arm. Conclusion: PDM011011 capsule (1200 mg/day) exhibited the modest efficacy and safety as compared to Metformin (1000 mg/day) in type 2 diabetes patients.展开更多
文摘Based on commercially available polyvinyl alcohol (PVA) stabilised polyvinyl acetate (PVAc), emulsion adhesives are neither heat nor moisture-resistant and show weak strength at high relative humidity and high temperatures. Pre- or post-crosslinking is another method used to manufacture a conventional vinyl-based homopolymers or copolymers system with improved water resistance. Vinyl neodecanoate (VeoVa), N-methylolacrylamide (NMA), Methacrylamide, methacrylic acid (MAA), and other self-crosslinking comonomers are typically inserted to produce highly water-resistant vinyl based homopolymers or copolymers. Additionally, organic crosslinkers like glyoxal, glutaraldehyde, citric acid, tartaric acid, and the like, as well as inorganic crosslinkers like acidic metal salts like aluminium chloride, aluminium nitrate, boric acid, and the like, can be used to prepare the highly water-resistant vinyl based homopolymers or copolymers. It is also possible to combine the self-crosslinking comonomers with the organic crosslinkers. Recently, a different hybrid chemistry has been developed that improves lap shear strength, has outstanding water resistance, good durability, and doesn’t require any additional crosslinker agents. Two distinct polymers were combined to develop hybrid polymers. They usually involve mixing an organic polymer with a polymer. There are many capping agents that are used for polyurethanes to produce acrylics that are capped with polyurethane and used as an oligomer in PVAc wood glue. Here, in this paper, we reviewed the different hybrid chemistry based on polyurethane chemistry for wood bonding applications.
文摘BACKGROUND The reference ranges for biochemical parameters can fluctuate due to factors like altitude,age,gender,and socioeconomic conditions.These values are crucial for interpreting laboratory data and guide clinical treatment decisions.Currently,there is no established set of reference intervals for cord blood biochemical parameters of newborns in India,particularly in Mumbai.AIM To create cord blood biochemical parameters reference intervals specifically for Mumbai,India.METHODS A cross-sectional study was conducted in an Indian tertiary care hospital.This study focused on healthy newborns with normal birth weight,born to pregnant mothers without health issues.Cord blood samples,approximately 2-3 mL in volume,were collected from 210 term neonates.These samples were divided into fluoride(glucose)and clot activator(serum)tubes and were subsequently analyzed in the institute's biochemical laboratory.The data obtained from the analysis was then subjected to statistical analysis.The result of the Shapiro-Wilk test suggested non-normality in the data distribution.Consequently,nonparametric statistics were utilized for analysis.The Mann-Whitney U test was utilized to compare parameter distributions among different factors,including the infant’s sex,delivery method,maternal age,and obstetric history.A significance level of P<0.05 was considered to indicate statistical significance.RESULTS The following represent the median figures and central 95 percentile reference intervals for biochemical parameters in umbilical cord blood of newborns:Serum direct bilirubin=(0.1-0.55)mg/dL,indirect bilirubin=(0.64-2.26)mg/dL,total bilirubin=(0.62-3.14)mg/dL,creatinine=(0.27-0.76)mg/dL,sodium=(128.19-143.26)mmol/L,chloride=(100.19-111.68)mmol/L,potassium=(1.62-9.98)mmol/L and plasma glucose=(24.75-94.23)mg/dL.Statistically significant differences were observed in serum sodium,potassium,and plasma glucose levels when comparing delivery modes.CONCLUSION This is the pioneering study in which first time,the biochemical reference intervals in cord blood for newborns are established in western India.The values are applicable for newborns from this area.Larger study throughout the country is required.
文摘BACKGROUND Cotadutide(MEDI0382)is a twincretin that acts as an agonist for both the glucagon-like peptide-1 and glucagon receptors.Several randomized controlled trials(RCTs)have been published evaluating the use of cotadutide in individuals with type 2 diabetes(T2D),showing promising results.However,the efficacy and safety of the drug use have been inadequately explored by systematic reviews and meta-analyses.AIM To assess the clinical efficacy and safety of cotadutide in individuals with T2D having overweight or obesity.METHODS The systematic reviews and meta-analyses have been registered with International Prospective Register of Systematic Reviews(CRD42024511703),and the protocol summary can be accessed online.Several databases and registries,including MEDLINE(via PubMed),Scopus,Web of Science,the Cochrane Central Register of Controlled Trials,and ClinicalTrials.gov,were systematically searched using related terms from their inception to May 15,2025,for RCTs involving individuals with T2D receiving cotadutide in the intervention group.Review Manager web was used to conduct meta-analysis using random-effects models.The co-primary outcomes of interest were the changes in glycated hemoglobin(HbA1c)and the percent changes in body weight from baseline.The results of the outcomes were expressed as mean differences(MDs)or risk ratios(RRs)with 95%confidence intervals(CIs).The analysis of outcomes was stratified according to whether the control group received a placebo,denoted as the placebo control group(PCG),or an active comparator,referred to as the active control group(ACG).RESULTS Nine RCTs(mostly phase 2 RCTs,n=1525)with study durations varying from 28 days to 54 weeks that met all the inclusion criteria were analyzed;five studies had a low overall risk of bias,while the other four had some concerns.Compared to the PCG,greater reductions in HbA1c were achieved with cotadutide 100μg(MD-0.77%,95%CI:-1.06 to-0.47),200μg(MD-0.68%,95%CI:-1.12 to-0.23),300μg(MD-0.67%,95%CI:-0.79 to-0.56),and 600μg(MD-0.69%,95%CI:-0.97 to-0.41).Cotadutide 100μg(MD-1.74%,95%CI:-3.23 to-0.25),200μg(MD-2.56%,95%CI:-3.37 to-1.75),300μg(MD-3.49%,95%CI:-4.14 to-2.84),and 600μg(MD-5.45%,95%CI:-7.17 to-3.73)achieved greater percent reductions in body weight from baseline.However,the certainty of evidence for HbA1c and percent body weight reductions was very low to low.Cotadutide,at all doses,also outperformed PCG in reducing fasting plasma glucose and absolute body weight.The changes in HbA1c,percent body weight,fasting plasma glucose,and absolute body weight were similar between the cotadutide group and the ACG.Compared to PCG,pooled doses of cotadutide increased the risks of treatment-emergent adverse events(AEs),treatment-related AEs,and discontinuation of the study drug due to AEs,but not for serious AEs.More subjects experienced overall gastrointestinal AEs,dyspepsia,nausea,vomiting,constipation,and decreased appetite with cotadutide than with PCG.Compared to the ACG,none of the AEs showed increased risk in the cotadutide group.CONCLUSION Cotadutide demonstrated glycemic control and weight-loss benefits in short-term,small RCTs(mostly phase 2).However,small sample sizes,very low to low certainty of evidence,and the absence of data on long-term cardiovascular and renal outcomes highlight substantial uncertainties,warranting cautious interpretation and further investigation in larger,longer-term trials to establish its safety and efficacy profile.
文摘Flow based Erosion e corrosion problems are very common in fluid handling equipments such as propellers, impellers, pumps in warships, submarine. Though there are many coating materials available to combat erosionecorrosion damage in the above components, iron based amorphous coatings are considered to be more effective to combat erosionecorrosion problems. High velocity oxy-fuel(HVOF)spray process is considered to be a better process to coat the iron based amorphous powders. In this investigation, iron based amorphous metallic coating was developed on 316 stainless steel substrate using HVOF spray technique. Empirical relationships were developed to predict the porosity and micro hardness of iron based amorphous coating incorporating HVOF spray parameters such as oxygen flow rate, fuel flow rate, powder feed rate, carrier gas flow rate, and spray distance. Response surface methodology(RSM) was used to identify the optimal HVOF spray parameters to attain coating with minimum porosity and maximum hardness.
文摘Tetrahydrocurcumin(THC)is one of the major metabolites of curcumin(CUR),an ancient bioactive natural polyphenolic compound.This research article describes both the solid and liquid state characterization of THC using advanced spectroscopic and thermo-analytical techniques.Anti-inflammatory,anti-oxidant,and neuroprotective activities of THC were investigated using in vitro cell lines.Liquid chromatography-mass spectrometry analysis revealed that our sample comprised 95.15%THC,0.51%tetrahydrodemethoxycurcumin(THDC),3.40%hexahydrocurcumin,and 0.94%octahydrocurcumin.Gas chromatography-mass spectrometry analysis indicated the presence of 96.68%THC and 3.32%THDC.THC in solution existed as keto-enol tautomers in three different forms at different retention time,but the enol form was found to be dominant,which was also supported by nuclear magnetic resonance analysis.THC was thermally stable up to 335.55C.THC exhibited more suppression of cytokines(TNF-a,IL-1b,and MIP-1a)than CUR in a concentration-dependent manner in mouse splenocytes,while NK-cell and phagocytosis activity was increased in macrophages.THC showed a significant reduction of free radicals(LPO)along with improved antioxidant enzymes(SOD and catalase)and increased free radical scavenging activity against ABTSt radicals in HepG2 cells.THC displayed higher protection capability than CUR from oxidative stress and neuronal damage by improving cell viability against H2O2 induced HepG2 cells and MPPt induced SH-SY5Y cells,respectively,in a concentration-dependent manner.Thus,a variation of the biological activities of THC might rely on its keto-enol form and the presence of other THC analogs as impurities.The present study could be advantageous for further research on THC for better understanding its physicochemical properties and biological variation.
文摘Due to their lower environmental impact, ease of accessibility, low cost, and biodegradability, bio-renewable sources have been used extensively in the last several decades to synthesize adhesives, substituting petrochemical-based adhesive. Vegetable oils (including palm, castor, jatropha, and soybean oils), lactic acid, potato starch, and other bio-renewable sources are all excellent sources for the synthesis of adhesives that are being taken into consideration for the synthesis of “eco-friendly” adhesives. Due to their widespread use, accessibility, affordability, and biodegradability, biobased raw materials like carbohydrates used to synthesize wood and wood composite adhesive have gradually replaced petrochemical-based adhesive. Recently, xanthan gum, a naturally occurring polymer, has drawn the interest of scientists as a potentially petroleum source replacement. It possesses specific rheological characteristics, excellent water solubility, and stability to heat, and can be used as a binder, thickener, suspending agent, and stabilizer. Xanthan gum increases the adhesive strength in addition to increasing the viscosity of water-soluble adhesives. This article discusses xanthan gum as a potential substitute for traditional raw materials derived from petroleum that is used as a raw material for adhesives.
文摘The influence of overlap multi-pass friction stir processing on the microstructure and the mechanical properties, in particular, strength, ductility and hardness of die cast A1-7Si-3Cu aluminum alloy was investigated. It was observed that increase in the number of overlap passes friction stir processing resulted in significant refinement and redistribution of aluminum silicon eutectic phase and elimination of casting porosities. The microstructural refinement by the friction stir processing not only increases the ultimate tensile strength from 121 to 273 MPa, but also increases the ductility as observed by the increase in fracture strain from 1.8% to 10%. Analysis of the fractured surface reveals that the microstructural refinement obtained by friction stir processing plays a vital role in transforming the fracture mode from completely mixed mode to the ductile mode of the fracture with increasing number of passes. The change in the size, shape, morphology and distribution of eutectic silicon particles and elimination of the porosities are the main reasons for the increases in tensile strength and ductility due to friction stir processing.
基金the funding support provided by the Indian Institute of Technology Bombay,Centre of Excellence in Climate Studies(IITB-CECS)project of the Department of Science and Technology(DST),New Delhi,India。
文摘This article reports modeled ice thickness distribution and total ice volume of the 65 selected glaciers(>0.5 km^2)of Chandra basin,located in the Western Himalayas.This is a first-of-its-kind study that gives detailed insights about the current ice thickness distribution at an individual glacier level in the Western Himalayas.The estimates are obtained using an optimally parameterized Glab Top2_IITB[Glacier Bed Topography Indian Institute of Technology Bombay(IITB)version]model with highresolution Digital Elevation Model(DEM)as an input.The total estimated volume of all the 65 selected glaciers is about 55.32 km^3 covering a total area of about 591.03 km^2.Using hypsometric analysis,it is found that the maximum amount of ice volume,i.e.,about 12.79 km^3,is currently residing at the elevation range of 5200–5400 m a.s.l.Ice thickness estimates obtained in the current study are compared with the ensemble estimates obtained in the Global Glacier Thickness Initiative(G2TI)project for three large glaciers,namely,Bada Shigri,Samudra Tapu,and Gepang Gath glaciers.The obtained results indicate that the difference between both the studies is marginal in terms of mean ice thickness and maximum ice thickness estimates except Samudra Tapu glacier.Moreover,the uncertainty of the estimated glacier ice volume from this study is about±15%whereas,from the G2TI project,it is about 25%.The main reasons for the difference could be the quality of the inputs used,model structure,model parameterization as well as the time stamp of the input used.The obtained results from this study indicate that the use of appropriate shape factor and better DEM would result in more reliable glacier ice thickness estimates even by using a simple slopedependent model like Glab Top2_IITB.
基金supported by the Naval Research Board(NRB)Project Number:NRB-290/MAT/12-13
文摘Here we demonstrate the fabrication, electrochemical performance and application of an asymmetric supercapacitor (AS) device constructed with ss-Ni(OH)(2)/MWCNTs as positive electrode and KOH activated honeycomb-like porous carbon (K-PC) derived from banana fibers as negative electrode. Initially, the electrochemical performance of hydrothermally synthesized ss-Ni(OH)(2)/MWCNTs nanocomposite and K-PC was studied in a three-electrode system using 1 M KOH. These materials exhibited a specific capacitance (Cs) of 1327 Fig and 324 F/g respectively at a scan rate of 10 mV/s. Further, the AS device i.e., ss-Ni(OH)(2)/MWCNTs// K-PC in 1 M KOH solution, demonstrated a Cs of 156 F/g at scan rate of 10 mV/s in a broad cell voltage of 0-2.2 V. The device demonstrated a good rate capability by maintaining a Cs of 59 F/g even at high current density (25 A/g). The device also offered high energy density of 63 Wh/kg with maximum power density of 5.2 kW/kg. The AS device exhibited excellent cycle life with 100% capacitance retention at 5000th cycle at a high current density of 25 A/g. Two AS devices connected in series were employed for powering a pair of LEDs of different colors and also a mini fan. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.
文摘Failure analysis and fatigue life prediction are very important in the design procedure to assure the safety and reliability of rubber components. The fatigue life of a railway elastomeric pad is predicted by combining the test of material properties and finite element analysis (FEA). The specially developed chloroprene rubber material’s fatigue life equation is acquired based on uniaxial tensile test and fatigue life tests performed on the dumbbell specimens of the chloroprene rubber. The same chloroprene rubber was developed at Indian Rubber Manufacturer’s Research Association, Thane. The strain distribution contours and the maximum total principal strains of the elastomeric pad at different compressive loads are obtained using finite element analysis method. The software used for the FEA was ANSYS. The three parameter nonlinear hyperelastic Mooney-Rivlin Model and plane 182 elements were used for finite element analysis. The critical region cracks prone to arise are obtained and analysed. Then the maximum first principal elastic strain was used as the fatigue damage parameter, which is substituted in the chloroprene rubber’s fatigue life equation, to predict the fatigue life of an elastomeric pad in the number of cycles at different compressive loads. The results were compared with the technical requirements given by Indian Railway’s Research Designs and Standards Organization. These requirements were achieved up to certain extents. The results were also compared with the data available in the literature and a similarity was observed between the results acquired and literature data. In short, the proposed fatigue life prediction method can shorten the product design cycle, decrease the design and product cost remarkably and improve the quality of an elastomeric pad.
文摘Silver nanoparticles were synthesized by chemical reduction method. The Ag nanoparticles (AgNP) were characterized using UV-Vis spectroscopy which shows an absorption band at 420 nm confirming the formation of nanoparticles. For any practical application of the silver nanoparticles it is necessary to stabilize it which can be done by making a composite. In the present studies three polymers were chosen such that AgNP could be put to some practical use. Polyvinyl Alcohol (PVA), Polypyrrole (Ppy) and Carboxymethyl cellulose (CMC) are important for use in textiles, electronics and food/drug technologies respectively. Polymeric composites of PVA, PPy, and CMC were prepared by mixing the aqueous solutions of the respective polymers and the colloidal suspension of preformed silver nanoparticles. Various compositions containing 1% to 5% of Ag nanoparticles were prepared. Thin films of these composites were characterized by UV-Vis spectroscopy, X-ray diffraction and Scanning electron microscopy. X-ray diffraction showed the presence of the peaks at 2θ values of 38.1°, 44.2°, 64.4 and 78.2° corresponding to cubic phase of silver metal. SEM photographs revealed the presence of Ag nanoparticles of sizes varying from 40 to 80 nm. The electrical conductivity of these materials was studied using the four probe method. The conductivity was found to increase from 10–6 for control samples to 10–3 S/cm after the formation of the nanocomposites.
文摘The samples of microdiamond as an inclusion of Os Ir alloy, coesite, stishovite, high pressure form of Tio2, high pressure nitrides associated with SiC along with boron carbide, have been reported in the past from the placer deposits of Luobasa ophiolite of Yarlung Zangbo region of Tibet. For the formation of these ultra high findings, pressure in the range of 4 to 9 Gpa and temperature in the range of 700° C - 1300° C is required. Thus these minerals can either be incorporated into the chromitite in the deep upper mantle or they have an impact origin. In absence of impact crater, Prof. Fang and others have favored the mantle origin but for the formation of nitrides in the deep mantle, the source of N is not clear. However, the event of comet impact provides better explanation for the formation process. It also simplifies the explanation of coexistence of most of these minerals in a single crystal with the shallow origin and the perfect preservation of the coesite as consequence of rapid cooling after the shock metamorphism.
文摘In the terrestrial planet zone, Comets start outgassing due to solar radiation. This can make comet composition fragile enough to break under the gravitational gradient. Examples like those of Comet Shoemaker-Levy 9 [1] show that it is not unusual for comets to disintegrate due to gravitational gradients. In the event of an impact of such a disintegrated comet on earth, multiple coherent impact craters will be distributed over a large area. The low-density porous composition of the comet will result in the formation of “large flat-floored craters” spread over a large area with a network of faults and fractures as described by Roddy and co-workers (Roddy, 1976;Roddy et al., 1977) [2] [3]. Due to its unusual appearance these impacts patterns are different than rock/metal asteroid impact craters. As a result, these sites are difficult to identify. There are multiple such sites on the planet earth which are under study for impact but due to complex nature of comet impact craters, they have been a conundrum for some time. One such possible site matching the comet impact features can be observed in the southern Tibet between the latitudes of 82°30'E and 90°30'E and 29°N and 33°N. This study indicates that the lakes in this region were formed by the impact of a single disintegrating comet that hit the region. Observation indicates that the lakes are unusually closely aligned and have a steep slope facing circular feature on the eastern side. Fractures and faults connecting these lakes can be observed over entire subject site hinting towards the multiple impact craters. These craters are large flat-floored and spread over a large area. Gravitational anomaly in the lake region along with the presence of Ultra High Pressure (UHP) minerals like cubic Born Nitride, micro-diamond with the inclusion of Platinum Group Elements (PGE), coesite, Stishovite, osbornite and other complex finds in the region support the possibility of impact.
文摘In southern Tibet, there is a series of lakes in the region (82°30'E, 29°N and 90°30'E, 33°N). This study indicates that these lakes were formed by the impact of a single disintegrating comet that hit the region. Observation indicates that the lakes are unusually closely aligned and have a steep slope facing circular feature on the eastern side. Fractures and faults connecting these lakes can be observed over entire subject site hinting towards the multiple impact craters. The terrain is uneven and lakes are partially filled hence in some cases do not look like circular or elliptical. These lakes vary from 1 Km to 65 Km in diameter and are linearly aligned around a single line. Studies of deuterium by Yuan et al. (2011) [1] indicate an abrupt 4‰ increase in δ18O in middle Holocene period around 6000 years ago. The study indicates that the region is rich in diamond, Coesite, Platinum Group Elements (PGE), Stishovite, tektites, and other complex alloys, as would be expected from a high energy impact of an extraterrestrial object. The possibility of the impact as one of the reasons for the diamond in this region was also suggested by Wen-Ji Bai and Qing-Song Fang (2007) [2]. However in absence of definitive evidence they favoured mantle origin. Two possible reasons of absence of impact signature are source of sample and impact pattern. First is the source of the sample which is collected from the river beds of Yarlung-Zangbo Suture Zone of Tibet which is believed to be the origin of this diamond, however it ignores the fact that these rivers get water from lakes which are in the proposed impact zone and the second reason is the impact-pattern spread over close to 800 km which is not expected from the asteroid impact. It will therefore be prudent to test samples from the lake region to understand surface distortion features to confirm the impact. Based on satellite imagery major industrial development supported by road infrastructure in the subject region near lakes and rivers originating from these lakes can be observed hinting towards placer mining activity associated with lakes (craters). Our study suggests that the diamonds, Platinum Group Elements, Stishovite and other alloys harvested from the region should be considered as comet impact diamonds rather than those created in the interior of the earth.
文摘<span style="font-family:Verdana;">The present work encompasses identification and characterization of major degradation product (DP) of OSM observed in base hydrolytic stress study. The separation of DP was carried out on a non-polar stationary phase by using high-performance liquid chromatography system (HPLC). Using waters X-bridge (250 mm × 4.6 mm, 5 μm) C18 column with gradient elution program. For the characterization study, stress samples were subjected to HPLC and UPLC-QTOF-MS/MS and based on mass fragmentation pattern</span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">,</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> plausible structure was deduced. Further</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">,</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> the DP was isolated using semi-prepara</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">- </span></span></span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;">tive liquid chromatography and concentrated the fractions using lyophiliza</span><span style="font-family:Verdana;">tion. The isolated DP was subjected to extensive 1D (1H, 13C, and</span><span style="font-family:Verdana;"> DEPT-135) and 2D (COSY, HSQC and HMBC) nuclear magnetic resonance (NMR) studies to authenticate the structure. The impurity was unambiguously named as N-(2-((2-(dimethylamino)ethyl)(methyl)amino)-4-metho</span></span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">-</span></span></span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;">xy-5-((4-(1-methyl-1H-indol-3-yl)pyrimidin-2-yl)amino)phenyl)-3-methoxy</span><span style="font-family:Verdana;">propanamide.</span></span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">Add</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">- </span></span></span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;">itionally, the </span><i><span style="font-family:Verdana;">In-Silico</span></i><span style="font-family:Verdana;"> structure activity relation (QSAR) assessed through sta</span></span></span></span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;">tistical based software’s DEREK Nexus</span><sup><span style="font-family:Verdana;">TM</span></sup><span style="font-family:Verdana;">, and MultiCASE, Case Ultra</span><sup><span style="font-family:Verdana;">TM</span></sup></span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> widely accepted and respected software’s for DP and OSM</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">.</span></span></span>
文摘Currently, due to scarcity of hydrocarbon resources and the extensive use of water based, solvent based and hot melt adhesives in wood bonding in furniture industries and packaging industries that demand recyclability, compostability and bio-degradability, recently attention has been concentrated to making these formulations completely bio-based, sustainable and biodegradable. Biodegradable hot melt adhesives (HMAs) prepared from natural sources have a potential for use in furniture and packaging industries because of an increase in awareness of environmental issues, the replacement of conventional petroleum-derived hydrocarbon raw materials by renewable, biodegradable and sustainable materials has developed. In terms of environmental issues, such as climate crisis due to an increase of carbon dioxide emission, attempts have been made to produce HMAs using non-hydrocarbon resins, such as polylactic acid (PLA)-based resins, containing no petroleum as a raw material. Polylactic acid was prepared by self-condensation reactions of lactic acid or by lactide ring opening polymerisation, and used for packaging materials, sanitary pads, diapers etc., especially adhesives owing to its excellent processability and the excellent mechanical properties of its HMAs products. Therefore, recently the use of PLA materials as a substitute for non-biodegradable hydrocarbon-based polymers can be considered to be environmentally favourable. Here, we discussed the various uses of PLA as a sustainable and bio-degradable and sustainable hot melt adhesive.
文摘White glues, also referred to as polyvinyl acetate (PVAc) adhesives, are thermoplastics that soften when heated to a specific degree and re-harden when cooled. For general assembly tasks in the joinery business, such as edge gluing, wood veneer, and edge bonding, white glues have been used. White glue requires a prolonged setting time to achieve adequate handling strength as it solidifies through evaporation or absorption of water by the wood. Cold press and hot press techniques are used to bond wood substrates. Recently, white glue is frequently used as a wood adhesive with dielectric heating systems to prevent this and enhance production speeds. Radio frequency (RF) curing is merely a technique for heating glue lines in wood-to-wood joints. It considered a source of heat, like steam and electricity. In order to bond wood substrates with the least amount of clamping time, the RF produces a very rapid, uniform rise in temperature. In this review paper, we discussed the radio frequency curing technique, their mechanism and troubleshooting to achieve perfect wood bond in joinery segment.
文摘We all negotiate,formally or informally,in jobs,in day today lives and outcomes of negotiations affect those processes of life.Although negotiation is an intrinsic nature of human psyche,it is very complex phenomenon to implement using computing and internet for the various purposes in E Commerce.Automation of negotiation process poses unique challenges for computer scientists and researchers,so here we study how negotiation can be modeled and analyzed mathematically,what can be different techniques and strategies or set of rules/protocols to be implemented and how they can be relevantly implemented.We are in a quest to find out how this complex process,which involves human psyche can be automated using computers and modern day technologies.Now,the quest is not only automation,looking at the research in the related field in last ten years;but it is all about finding solutions to make e-negotiation more efficient and more accurate,as well as useful in any kind of electronic trading situations.Here is an attempt to consolidate our work of last few years on automation of negotiation process;we call it as negotiation protocol on research,study as well as implementation level of negotiation automation.Overall,we are trying to give few solutions to make the automation more efficient.
文摘Context: Bitter melon (Momoradica charantia) is one of the well-known plants used for lowering blood glucose since antiquity. Aims: To compare the efficacy and safety of PDM011011 capsule (1200 mg/day) with Metformin (1000 mg/day) in a 15 weeks study using mean change in fasting plasma glucose (FPG) and Hb1Ac% in subjects with type 2 diabetes mellitus (T2DM). Settings and Design: This is an open-label, randomized, active-controlled, multicentric, phase III study. Methods and Material: A total of 123 eligible patients were randomized in 2:1 ratio in PDM011011 and Metformin arm. Total 83 subjects received PDM011011 capsule (1200 mg/day) and 40 subjects received Metformin (1000 mg/day) in their respective arms for 15 weeks. Subjects were analyzed for FPG and Hb1Ac% at baseline and during treatment visits (Visit 3 to Visit 7). Safety assessments were carried out. Results: In this study, the significant reduction in mean FPG level was observed after treatment with PDM011011 capsule and Metformin in T2DM patients. The mean change from baseline to week 15 in FPG was 14.52 mg/dL (95% CI: 6.36, 22.67) in the PDM011011-treated subjects and 28.34 mg/dL (95% CI: 21.35, 35.32) in the Metformin-treated subjects. At week 15, the mean change from baseline in HbA1c levels was 0.27% (95% CI: 0.06, 0.47) in the PDM011011 arm and 0.62% (95% CI: 0.40, 0.83) in the Metformin arm. Conclusion: PDM011011 capsule (1200 mg/day) exhibited the modest efficacy and safety as compared to Metformin (1000 mg/day) in type 2 diabetes patients.
