The clothing industry is considered one of the most polluting industries on the planet due to the high consumption of water,energy,chemicals/dyes,and high generation of solid waste and effluents.Faced with environment...The clothing industry is considered one of the most polluting industries on the planet due to the high consumption of water,energy,chemicals/dyes,and high generation of solid waste and effluents.Faced with environmental concerns,the textile ennoblement sector is the most critical of the textile production chain,especially the traditional dyeing processes.As an alternative to current problems,dyeing with supercritical CO_(2)(scCO_(2))has been presented as a clean and efficient process for a sustainable textile future.Supercritical fluid dyeing(SFD)has shown a growing interest due to its significant impact on environmental preservation and social,economic,and financial gains.The main SFD benefits include economy and reuse of non-adsorbed dyes;reduction of process time and energy expenditure;capture of atmospheric CO_(2)(greenhouse gas);use and recycling of CO_(2)in SFD;generation of carbon credits;water-free process;effluent-free process;reduction of CO_(2)emission and auxiliary chemicals.Despite being still a non-scalable and evolving technology,SFD is the future of dyeing.This review presented a comprehensive overview of the environmental impacts caused by traditional processes and confronted the advantages of SFD.The SFD technique was introduced,along with its latest advances and future perspectives.Financial and environmental gains were also discussed.展开更多
Owing to the ongoing pandemic,the importance of and demand for antimicrobial textiles have reached new heights.In addition to being used for medical purposes,antimicrobial textiles could be a self-defense entity again...Owing to the ongoing pandemic,the importance of and demand for antimicrobial textiles have reached new heights.In addition to being used for medical purposes,antimicrobial textiles could be a self-defense entity against microbes for the general population.Because textiles are widely used,they can effectively be used to prevent the spread of microbes worldwide.The conventional antibacterial finishing process of textiles is the wet treatment method using either the pad–dry–cure or exhaustion techniques.However,the textile wet treatment industries are major contributors to worldwide pollution,which is extremely concerning.Given the current and near-future high demand,it is imperative to include plasma in antimi-crobial finishing to achieve high efficiency in production,while retaining a safe environment.Hence,this paper reviews the rationale of plasma use in textile antimicrobial finishing through a critical analysis of recent studies and emphasizes the types and mechanisms of plasma techniques available for application.展开更多
Nowadays, highly alkaline chemicals like caustic soda, soda ash, silicate, acetic acid and soaping agents are used for scouring to remove the non-cellulosic impurities from the cotton. Using 30 - 40 gm/Kg on weight of...Nowadays, highly alkaline chemicals like caustic soda, soda ash, silicate, acetic acid and soaping agents are used for scouring to remove the non-cellulosic impurities from the cotton. Using 30 - 40 gm/Kg on weight of the fabric results in destruction of cotton structure. Intensive rinsing and more acid is needed for reutilization of cotton, which enlarges the volume of effluent. Furthermore, these hazards chemicals result in increase in COD, BOD and TDS in waste water. These chemicals also attack the cellulose leading to heavy strength loss and weight loss in the fabric. The net result is low quality control and polluted environment with high usage of energy, time, chemical and water. Aloe vera presents the finest commercial opportunity in various industrial sectors among the various plants. Also, most of the countries are gifted with the unique geographical features that are essential for cultivation of Aloe vera. Yet, none of the country has realized and reaped the full potential of such plants in various industrial applications. The reason is simple: lack of the requisite expertise in extraction of various enzymes present in aloe plant. Fortunately, the technology is now accessible to make use of enzyme in textile application. In this research an attempt has been made to make use of lipase enzyme extracted from aloe plant in textile chemical pre- treatment process. In the present research work, an attempt was made to develop bio scouring of 100% cotton knitted fabric with lipase enzyme extracted from Aloe deberena plant at various concentration (1%, 2% and 3%) at various temperature (40?C, 60?C and 70?C) for a period of 30 minutes, 60 minutes and 90 minutes. The properties of bio scoured fabrics are compared with these of conventional scoured one. Encouraging results in terms of dye uptake, dye levelness, wash fastness, light fastness and rubbing fastness are obtained in case of bio scouring fabric dyed with dark reactive colors. Further, it reduces volume of effluent as well as COD, TDS and pH. It saves a substantial thermal energy 50% and electrical energy 40%. Bio scouring waste water has 40% - 50% less COD and 60% less TDS as compared to conventional scouring waste water.展开更多
Outdoor jackets are engineered to protect against extreme weather while ensuring comfort and safety. Key to this protection is the thermal properties, achieved through insulation materials like down feathers and synth...Outdoor jackets are engineered to protect against extreme weather while ensuring comfort and safety. Key to this protection is the thermal properties, achieved through insulation materials like down feathers and synthetic fibers, which trap heat and minimize heat loss. Resistance to wind, rain, and snow is provided by waterproof and windproof fabrics, while breathability allows moisture to escape, maintaining a comfortable microclimate. Air permeability and water resistance are essential for achieving this balance. This study examines two outdoor jacket prototypes with six material layers each. The outer layer (Layer 1) consists of 100% polyester coated with polyurethane for waterproofing. Inner layers (Layers 2, 3, and 6) use wool/cotton and wool/polyamide blends, offering insulation and moisture-wicking properties. Down feathers are used as the filling material, providing excellent warmth. Advanced materials like graphene and silver honeycomb fabrics were included to enhance thermal conductivity and regulate heat transfer. Performance testing focused on thermal conductivity, comfort (water and air permeability), and mechanical properties like tensile strength and tear resistance. Tests also assessed spray application and fastness to evaluate durability under environmental exposure. Results showed that jackets with silver-infused honeycomb fabrics had superior thermal conductivity, enabling better heat regulation and comfort in harsh conditions. The findings highlight the advantages of integrating silver honeycomb fabrics into outdoor jackets. These materials enhance insulation, thermal regulation, and overall comfort, making them ideal for high-performance designs. Incorporating such fabrics ensures functionality, durability, and user protection in extreme environments.展开更多
While various kinds of fibers are used to improve the hot mix asphalt(HMA) performance, a few works have been undertaken on the hybrid fiber-reinforced HMA. Therefore, the fatigue life of modified HMA samples using po...While various kinds of fibers are used to improve the hot mix asphalt(HMA) performance, a few works have been undertaken on the hybrid fiber-reinforced HMA. Therefore, the fatigue life of modified HMA samples using polypropylene and polyester fibers was evaluated and two models namely regression and artificial neural network(ANN) were used to predict the fatigue life based on the fibers parameters. As ANN contains many parameters such as the number of hidden layers which directly influence the prediction accuracy, genetic algorithm(GA) was used to solve optimization problem for ANN. Moreover, the trial and error method was used to optimize the GA parameters such as the population size. The comparison of the results obtained from regression and optimized ANN with GA shows that the two-hidden-layer ANN with two and five neurons in the first and second hidden layers, respectively, can predict the fatigue life of fiber-reinforced HMA with high accuracy(correlation coefficient of 0.96).展开更多
Surgical prostheses and implants used in hard-tissue engineering should satisfy all the clinical,mechanical,manufacturing,and economic requirements in order to be used for load-bearing applications.Metals,and to a les...Surgical prostheses and implants used in hard-tissue engineering should satisfy all the clinical,mechanical,manufacturing,and economic requirements in order to be used for load-bearing applications.Metals,and to a lesser extent,polymers are promising materials that have long been used as load-bearing biomaterials.With the rapid development of additive manufacturing(AM)technology,metallic and polymeric implants with complex structures that were once impractical to manufacture using traditional processing methods can now easily be made by AM.This technology has emerged over the past four decades as a rapid and cost-effective fabrication method for geometrically complex implants with high levels of accuracy and precision.The ability to design and fabricate patient-specific,customized structural biomaterials has made AM a subject of great interest in both research and clinical settings.Among different AM methods,laser powder bed fusion(L-PBF)is emerging as the most popular and reliable AM method for producing load-bearing biomaterials.This layer-by-layer process uses a high-energy laser beam to sinter or melt powders into a part patterned by a computer-aided design(CAD)model.The most important load-bearing applications of L-PBF-manufactured biomaterials include orthopedic,traumatological,craniofacial,maxillofacial,and dental applications.The unequalled design freedom of AM technology,and L-PBF in particular,also allows fabrication of complex and customized metallic and polymeric scaffolds by altering the topology and controlling the macro-porosity of the implant.This article gives an overview of the L-PBF method for the fabrication of load-bearing metallic and polymeric biomaterials.展开更多
In previous research much effort has been devoted to the geometry of woven fabrics and relat-ed problems under the assumption of constant yarn configuration in fabric.This paper will first re-port that image crimp (ya...In previous research much effort has been devoted to the geometry of woven fabrics and relat-ed problems under the assumption of constant yarn configuration in fabric.This paper will first re-port that image crimp (yarn crimp measured by an image analysis method) seems larger than actualvalue.From the explanation of this result,the variation of yarn configuration in woven fabric dueto the non-uniform flattening is revealed.The significance of this actual structure of woven fabricsis discussed.It is believed that the variation of yarn configuration is very important for fabric per-formance,and may be an advantage for fabric quality.展开更多
The present paper deals with gelatin nanofibres functionalized with silver nanoparticles, prepared by electrospinning using solutions of gelatin mixed with silver nitrate (AgNO3). As a common solvent for gelatin and s...The present paper deals with gelatin nanofibres functionalized with silver nanoparticles, prepared by electrospinning using solutions of gelatin mixed with silver nitrate (AgNO3). As a common solvent for gelatin and silver nitrate (AgNO3), a mixture of acetic acid and water (70:30 v/v) was selected. In this system, acetic acid was used as a solvent for gelatin, and at the same time reducing agent for silver ions in solution. Silver nanoparticles (nAg) were stabilized through a mechanism that involves an interaction of the oxygen atoms of the carbonyl groups of gelatin. The viscosity and the conductivity of the gelatinous solutions were found to increase with the solution concentration. There is an observed decrease in the viscosity of the nAg containing gelatin solutions with the aging time increasing, whereas the conductiity of the AgNO3—containing gelatin solutions was greater than that of the base gelatin solution. The gelatin nanofibres functionalized with silver nanoparticles were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and antimicrobial test. The results of investigations by TEM and XRD confirmed the presence of silver nanoparticles with diameters in the range of (2 - 10 nm), uniformly distributed over the surface of smooth nanofibres with an average diameter of 70 nm. The release of silver ions from both the 2- and 4-hrs crosslinked nAg containing gelatin fiber mats by a total immersion method in buffer and distilled water occurred rapidly during the first 60 minutes, and increased gradually afterwards. Lastly, the tests demonstrated that gelatin/Ag nanofibers have a good antimicrobial activity against some common bacteria found on burned wounds. The anti-bacterial activity of these materials was greatest against Staphylococcus aureus, followed by Escherichia coli, and Pseudomonas aeroginosa ≈ Candida albicans.展开更多
A new method is presented to solve the problem of loss of rabbit hair by using ES fiber blending with rabbit hair. ES fiber is used to bond the rabbit hair to prevent the rabbit hair from losing after heat setting. Th...A new method is presented to solve the problem of loss of rabbit hair by using ES fiber blending with rabbit hair. ES fiber is used to bond the rabbit hair to prevent the rabbit hair from losing after heat setting. The factors affecting hair loss are heat setting temperature, rabbit hair/ES fiber blend ratio, fabric heating setting, twistsof yarn, etc. Temperature of heat setting and ES fiber content are the two key factors This method has almost no detrimental effect on the coziness of the fabric, which is better than other hair loss prevention methods.展开更多
A new method based on image analysis for electrospun nanofibre diameter measurement is presented. First, the SEM micrograph of the nanofibre web obtained by electrospinning process is converted to binary image using l...A new method based on image analysis for electrospun nanofibre diameter measurement is presented. First, the SEM micrograph of the nanofibre web obtained by electrospinning process is converted to binary image using local thresholding method. In the next step, skeleton and distance transformed image are generated. Then, the intersection points which bring about untrue measurements are identified and removed from the skeleton. Finally, the resulting skeleton and distance transformed image are used to determine fibre diameter. The method is evaluated by a simulated image with known characteristics generated by ？-randomness procedure. The results indicate that this approach is successful in making fast, accurate automated measurements of electrospun fibre diameters.展开更多
Silicone coatings have been used in this study. The method adopted was the liquid drop analysis on the coated fabrics. The contact angle between a liquid drop and the fabric surface was measured with two liquids conti...Silicone coatings have been used in this study. The method adopted was the liquid drop analysis on the coated fabrics. The contact angle between a liquid drop and the fabric surface was measured with two liquids continuously and recorded by a computer. The surface energy was calculated by means of Owens method.Kinetic measurement was adopted. The contact angle of liquids on the fabric coated silicone decreased with time was found. A compound solution DX has been found, so that the contact angle of the liquids on the fabric washed with DX becomes constant, and the surface energy of the fabric can be reduced to below 15 mJ/m2.展开更多
Main factors influencing anti-ultraviolet performance of woven fabrics are investigated. By means of detailed arrangement of sample design, sample making, testing and analyzing, it shows that fiber materials, fabric c...Main factors influencing anti-ultraviolet performance of woven fabrics are investigated. By means of detailed arrangement of sample design, sample making, testing and analyzing, it shows that fiber materials, fabric compactness, fabric weave and yarn type are the four important factors influencing anti-UV performance of woven fabric, but with different effects. Among them fiber material is the most important factor. For the common fiber materials used, it shows that the anti-UV performance of polyester is comparatively better than others. Once fiber material is determined, fabric with medium float weave and high compactness can offer a good anti-UV performance. The anti-UV performance of fabric with ＂anti-UV＂ filament yarn is better than that with ＂anti-UV＂ staple yarn. The anti-UV property of fabrics with untwisted filament yams is better than that with twist counterparts.展开更多
This paper employs computer colour generation,and match prediction systems and aims tofind the most critical change of dye concentration corresponding to changes of Hue,or Chroma,orLightness of 1 unit just visible col...This paper employs computer colour generation,and match prediction systems and aims tofind the most critical change of dye concentration corresponding to changes of Hue,or Chroma,orLightness of 1 unit just visible colour difference,thus investigating the required accuracy level fordyeing dispensing.This leads to the selection of one critical colour-difference dimension of threefrom CMC (1:c) measurement.The results reveal that the concentration change in dye dispensing ismost critical for change of Hue in a computer controlled system.The formula describing the rela-tionship Of △E and △H in CMC (2:1) measurement is selected for further investigation.展开更多
The world's population is growing,leading to an increasing demand for freshwater resources for drinking,sanitation,agriculture,and industry.Interfacial solar steam generation(ISSG)can solve many problems,such as m...The world's population is growing,leading to an increasing demand for freshwater resources for drinking,sanitation,agriculture,and industry.Interfacial solar steam generation(ISSG)can solve many problems,such as mitigating the power crisis,minimizing water pollution,and improving the purification and desalination of seawater,rivers/lakes,and wastewater.Cellulosic materials are a viable and ecologically sound technique for capturing solar energy that is adaptable to a range of applications.This review paper aims to provide an overview of current advancements in the field of cellulose-based materials ISSG devices,specifically focusing on their applications in water purification and desalination.This paper examines the cellulose-based materials ISSG system and evaluates the effectiveness of various cellulosic materials,such as cellulose nanofibers derived from different sources,carbonized wood materials,and two-dimensional(2D)and 3D cellulosic-based materials from various sources,as well as advanced cellulosic materials,including bacterial cellulose and cellulose membranes obtained from agricultural and industrial cellulose wastes.The focus is on exploring the potential applications of these materials in ISSG devices for water desalination,purification,and treatment.The function,advantages,and disadvantages of cellulosic materials in the performance of ISSG devices were also deliberated throughout our discussion.In addition,the potential and suggested methods for enhancing the utilization of cellulose-based materials in the field of ISSG systems for water desalination,purification,and treatment were also emphasized.展开更多
文摘The clothing industry is considered one of the most polluting industries on the planet due to the high consumption of water,energy,chemicals/dyes,and high generation of solid waste and effluents.Faced with environmental concerns,the textile ennoblement sector is the most critical of the textile production chain,especially the traditional dyeing processes.As an alternative to current problems,dyeing with supercritical CO_(2)(scCO_(2))has been presented as a clean and efficient process for a sustainable textile future.Supercritical fluid dyeing(SFD)has shown a growing interest due to its significant impact on environmental preservation and social,economic,and financial gains.The main SFD benefits include economy and reuse of non-adsorbed dyes;reduction of process time and energy expenditure;capture of atmospheric CO_(2)(greenhouse gas);use and recycling of CO_(2)in SFD;generation of carbon credits;water-free process;effluent-free process;reduction of CO_(2)emission and auxiliary chemicals.Despite being still a non-scalable and evolving technology,SFD is the future of dyeing.This review presented a comprehensive overview of the environmental impacts caused by traditional processes and confronted the advantages of SFD.The SFD technique was introduced,along with its latest advances and future perspectives.Financial and environmental gains were also discussed.
文摘Owing to the ongoing pandemic,the importance of and demand for antimicrobial textiles have reached new heights.In addition to being used for medical purposes,antimicrobial textiles could be a self-defense entity against microbes for the general population.Because textiles are widely used,they can effectively be used to prevent the spread of microbes worldwide.The conventional antibacterial finishing process of textiles is the wet treatment method using either the pad–dry–cure or exhaustion techniques.However,the textile wet treatment industries are major contributors to worldwide pollution,which is extremely concerning.Given the current and near-future high demand,it is imperative to include plasma in antimi-crobial finishing to achieve high efficiency in production,while retaining a safe environment.Hence,this paper reviews the rationale of plasma use in textile antimicrobial finishing through a critical analysis of recent studies and emphasizes the types and mechanisms of plasma techniques available for application.
文摘Nowadays, highly alkaline chemicals like caustic soda, soda ash, silicate, acetic acid and soaping agents are used for scouring to remove the non-cellulosic impurities from the cotton. Using 30 - 40 gm/Kg on weight of the fabric results in destruction of cotton structure. Intensive rinsing and more acid is needed for reutilization of cotton, which enlarges the volume of effluent. Furthermore, these hazards chemicals result in increase in COD, BOD and TDS in waste water. These chemicals also attack the cellulose leading to heavy strength loss and weight loss in the fabric. The net result is low quality control and polluted environment with high usage of energy, time, chemical and water. Aloe vera presents the finest commercial opportunity in various industrial sectors among the various plants. Also, most of the countries are gifted with the unique geographical features that are essential for cultivation of Aloe vera. Yet, none of the country has realized and reaped the full potential of such plants in various industrial applications. The reason is simple: lack of the requisite expertise in extraction of various enzymes present in aloe plant. Fortunately, the technology is now accessible to make use of enzyme in textile application. In this research an attempt has been made to make use of lipase enzyme extracted from aloe plant in textile chemical pre- treatment process. In the present research work, an attempt was made to develop bio scouring of 100% cotton knitted fabric with lipase enzyme extracted from Aloe deberena plant at various concentration (1%, 2% and 3%) at various temperature (40?C, 60?C and 70?C) for a period of 30 minutes, 60 minutes and 90 minutes. The properties of bio scoured fabrics are compared with these of conventional scoured one. Encouraging results in terms of dye uptake, dye levelness, wash fastness, light fastness and rubbing fastness are obtained in case of bio scouring fabric dyed with dark reactive colors. Further, it reduces volume of effluent as well as COD, TDS and pH. It saves a substantial thermal energy 50% and electrical energy 40%. Bio scouring waste water has 40% - 50% less COD and 60% less TDS as compared to conventional scouring waste water.
文摘Outdoor jackets are engineered to protect against extreme weather while ensuring comfort and safety. Key to this protection is the thermal properties, achieved through insulation materials like down feathers and synthetic fibers, which trap heat and minimize heat loss. Resistance to wind, rain, and snow is provided by waterproof and windproof fabrics, while breathability allows moisture to escape, maintaining a comfortable microclimate. Air permeability and water resistance are essential for achieving this balance. This study examines two outdoor jacket prototypes with six material layers each. The outer layer (Layer 1) consists of 100% polyester coated with polyurethane for waterproofing. Inner layers (Layers 2, 3, and 6) use wool/cotton and wool/polyamide blends, offering insulation and moisture-wicking properties. Down feathers are used as the filling material, providing excellent warmth. Advanced materials like graphene and silver honeycomb fabrics were included to enhance thermal conductivity and regulate heat transfer. Performance testing focused on thermal conductivity, comfort (water and air permeability), and mechanical properties like tensile strength and tear resistance. Tests also assessed spray application and fastness to evaluate durability under environmental exposure. Results showed that jackets with silver-infused honeycomb fabrics had superior thermal conductivity, enabling better heat regulation and comfort in harsh conditions. The findings highlight the advantages of integrating silver honeycomb fabrics into outdoor jackets. These materials enhance insulation, thermal regulation, and overall comfort, making them ideal for high-performance designs. Incorporating such fabrics ensures functionality, durability, and user protection in extreme environments.
文摘While various kinds of fibers are used to improve the hot mix asphalt(HMA) performance, a few works have been undertaken on the hybrid fiber-reinforced HMA. Therefore, the fatigue life of modified HMA samples using polypropylene and polyester fibers was evaluated and two models namely regression and artificial neural network(ANN) were used to predict the fatigue life based on the fibers parameters. As ANN contains many parameters such as the number of hidden layers which directly influence the prediction accuracy, genetic algorithm(GA) was used to solve optimization problem for ANN. Moreover, the trial and error method was used to optimize the GA parameters such as the population size. The comparison of the results obtained from regression and optimized ANN with GA shows that the two-hidden-layer ANN with two and five neurons in the first and second hidden layers, respectively, can predict the fatigue life of fiber-reinforced HMA with high accuracy(correlation coefficient of 0.96).
基金financial support for this research by the Australian Research Council(ARC)through the discovery grant DP170102557supported through an ARC Future Fellowship(FT160100252)。
文摘Surgical prostheses and implants used in hard-tissue engineering should satisfy all the clinical,mechanical,manufacturing,and economic requirements in order to be used for load-bearing applications.Metals,and to a lesser extent,polymers are promising materials that have long been used as load-bearing biomaterials.With the rapid development of additive manufacturing(AM)technology,metallic and polymeric implants with complex structures that were once impractical to manufacture using traditional processing methods can now easily be made by AM.This technology has emerged over the past four decades as a rapid and cost-effective fabrication method for geometrically complex implants with high levels of accuracy and precision.The ability to design and fabricate patient-specific,customized structural biomaterials has made AM a subject of great interest in both research and clinical settings.Among different AM methods,laser powder bed fusion(L-PBF)is emerging as the most popular and reliable AM method for producing load-bearing biomaterials.This layer-by-layer process uses a high-energy laser beam to sinter or melt powders into a part patterned by a computer-aided design(CAD)model.The most important load-bearing applications of L-PBF-manufactured biomaterials include orthopedic,traumatological,craniofacial,maxillofacial,and dental applications.The unequalled design freedom of AM technology,and L-PBF in particular,also allows fabrication of complex and customized metallic and polymeric scaffolds by altering the topology and controlling the macro-porosity of the implant.This article gives an overview of the L-PBF method for the fabrication of load-bearing metallic and polymeric biomaterials.
文摘In previous research much effort has been devoted to the geometry of woven fabrics and relat-ed problems under the assumption of constant yarn configuration in fabric.This paper will first re-port that image crimp (yarn crimp measured by an image analysis method) seems larger than actualvalue.From the explanation of this result,the variation of yarn configuration in woven fabric dueto the non-uniform flattening is revealed.The significance of this actual structure of woven fabricsis discussed.It is believed that the variation of yarn configuration is very important for fabric per-formance,and may be an advantage for fabric quality.
文摘The present paper deals with gelatin nanofibres functionalized with silver nanoparticles, prepared by electrospinning using solutions of gelatin mixed with silver nitrate (AgNO3). As a common solvent for gelatin and silver nitrate (AgNO3), a mixture of acetic acid and water (70:30 v/v) was selected. In this system, acetic acid was used as a solvent for gelatin, and at the same time reducing agent for silver ions in solution. Silver nanoparticles (nAg) were stabilized through a mechanism that involves an interaction of the oxygen atoms of the carbonyl groups of gelatin. The viscosity and the conductivity of the gelatinous solutions were found to increase with the solution concentration. There is an observed decrease in the viscosity of the nAg containing gelatin solutions with the aging time increasing, whereas the conductiity of the AgNO3—containing gelatin solutions was greater than that of the base gelatin solution. The gelatin nanofibres functionalized with silver nanoparticles were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and antimicrobial test. The results of investigations by TEM and XRD confirmed the presence of silver nanoparticles with diameters in the range of (2 - 10 nm), uniformly distributed over the surface of smooth nanofibres with an average diameter of 70 nm. The release of silver ions from both the 2- and 4-hrs crosslinked nAg containing gelatin fiber mats by a total immersion method in buffer and distilled water occurred rapidly during the first 60 minutes, and increased gradually afterwards. Lastly, the tests demonstrated that gelatin/Ag nanofibers have a good antimicrobial activity against some common bacteria found on burned wounds. The anti-bacterial activity of these materials was greatest against Staphylococcus aureus, followed by Escherichia coli, and Pseudomonas aeroginosa ≈ Candida albicans.
文摘A new method is presented to solve the problem of loss of rabbit hair by using ES fiber blending with rabbit hair. ES fiber is used to bond the rabbit hair to prevent the rabbit hair from losing after heat setting. The factors affecting hair loss are heat setting temperature, rabbit hair/ES fiber blend ratio, fabric heating setting, twistsof yarn, etc. Temperature of heat setting and ES fiber content are the two key factors This method has almost no detrimental effect on the coziness of the fabric, which is better than other hair loss prevention methods.
文摘A new method based on image analysis for electrospun nanofibre diameter measurement is presented. First, the SEM micrograph of the nanofibre web obtained by electrospinning process is converted to binary image using local thresholding method. In the next step, skeleton and distance transformed image are generated. Then, the intersection points which bring about untrue measurements are identified and removed from the skeleton. Finally, the resulting skeleton and distance transformed image are used to determine fibre diameter. The method is evaluated by a simulated image with known characteristics generated by ？-randomness procedure. The results indicate that this approach is successful in making fast, accurate automated measurements of electrospun fibre diameters.
文摘Silicone coatings have been used in this study. The method adopted was the liquid drop analysis on the coated fabrics. The contact angle between a liquid drop and the fabric surface was measured with two liquids continuously and recorded by a computer. The surface energy was calculated by means of Owens method.Kinetic measurement was adopted. The contact angle of liquids on the fabric coated silicone decreased with time was found. A compound solution DX has been found, so that the contact angle of the liquids on the fabric washed with DX becomes constant, and the surface energy of the fabric can be reduced to below 15 mJ/m2.
文摘Main factors influencing anti-ultraviolet performance of woven fabrics are investigated. By means of detailed arrangement of sample design, sample making, testing and analyzing, it shows that fiber materials, fabric compactness, fabric weave and yarn type are the four important factors influencing anti-UV performance of woven fabric, but with different effects. Among them fiber material is the most important factor. For the common fiber materials used, it shows that the anti-UV performance of polyester is comparatively better than others. Once fiber material is determined, fabric with medium float weave and high compactness can offer a good anti-UV performance. The anti-UV performance of fabric with ＂anti-UV＂ filament yarn is better than that with ＂anti-UV＂ staple yarn. The anti-UV property of fabrics with untwisted filament yams is better than that with twist counterparts.
文摘This paper employs computer colour generation,and match prediction systems and aims tofind the most critical change of dye concentration corresponding to changes of Hue,or Chroma,orLightness of 1 unit just visible colour difference,thus investigating the required accuracy level fordyeing dispensing.This leads to the selection of one critical colour-difference dimension of threefrom CMC (1:c) measurement.The results reveal that the concentration change in dye dispensing ismost critical for change of Hue in a computer controlled system.The formula describing the rela-tionship Of △E and △H in CMC (2:1) measurement is selected for further investigation.
基金This study was supported by Key Research and Development Program of Hubei Province(No.2022ACA002).
文摘The world's population is growing,leading to an increasing demand for freshwater resources for drinking,sanitation,agriculture,and industry.Interfacial solar steam generation(ISSG)can solve many problems,such as mitigating the power crisis,minimizing water pollution,and improving the purification and desalination of seawater,rivers/lakes,and wastewater.Cellulosic materials are a viable and ecologically sound technique for capturing solar energy that is adaptable to a range of applications.This review paper aims to provide an overview of current advancements in the field of cellulose-based materials ISSG devices,specifically focusing on their applications in water purification and desalination.This paper examines the cellulose-based materials ISSG system and evaluates the effectiveness of various cellulosic materials,such as cellulose nanofibers derived from different sources,carbonized wood materials,and two-dimensional(2D)and 3D cellulosic-based materials from various sources,as well as advanced cellulosic materials,including bacterial cellulose and cellulose membranes obtained from agricultural and industrial cellulose wastes.The focus is on exploring the potential applications of these materials in ISSG devices for water desalination,purification,and treatment.The function,advantages,and disadvantages of cellulosic materials in the performance of ISSG devices were also deliberated throughout our discussion.In addition,the potential and suggested methods for enhancing the utilization of cellulose-based materials in the field of ISSG systems for water desalination,purification,and treatment were also emphasized.
