This article presents findings from an extensive experimental program conducted by the French Agency for the Management of Radioactive Waste(ANDRA)at its Underground Research Laboratory.The focus of the study is the N...This article presents findings from an extensive experimental program conducted by the French Agency for the Management of Radioactive Waste(ANDRA)at its Underground Research Laboratory.The focus of the study is the NSC(Noyau de SCellement)experiment,designed to assess the performance of a sealing core composed of a mixture of 40%bentonite and 60%sand.The objective is to evaluate in situ hydraulic permeability,swelling behavior,and gas performance of the seal,which are essential components for the safe disposal of Intermediate-Level(IL)and High-Level Radioactive Waste(HLW)in deep geological repositories.The experimental setup,construction details of the NSC experiment,and the timeline of the project,from excavation,construction of the seal,and artificial hydration to hydraulic permeability tests,are comprehensively described.Andra has acquired valuable expertise in constructing an engineered barrier system,encompassing concrete plugs,and efficiently assembling a 5-m-long seal.Over the past decade,a controlled water injection process has been employed to hydrate the seal.The operational efficiency of sensors has been evaluated,with pore pressure sensors exhibiting moderate performance.In contrast,others,including total pressure,capacitive humidity,psychrometric humidity,and saturation sensors,demonstrate excellent performance up to their operational limits.The high-quality data obtained from this experiment will facilitate the modeling of the resaturation and hydraulic-gas performance of the seal.展开更多
Drill string vibration during drilling plays a vital and potentially decisive role in maintaining wellbore stability,as repeated impacts may lead to fatigue and borehole collapse.While drilling through geological laye...Drill string vibration during drilling plays a vital and potentially decisive role in maintaining wellbore stability,as repeated impacts may lead to fatigue and borehole collapse.While drilling through geological layers,a material contrast may act as a localization point for wellbore damage.The hypothesis tested in this paper is that wellbore instability is focused on the boundary between the layers and that mechanical contrasts accelerate the wellbore collapse.In this study,an elastic-plastic damage model was employed to investigate the effects of repeated mechanical impacts on wellbore stability.A 2-dimensional(2D)model of a wellbore surrounded by contrasting materials was developed,and the accumulated damage caused by repeated lateral impacts was monitored.It was found that damage develops not only around the wall of the wellbore but also along the material boundaries.A sensitivity analysis was carried out to identify the impact of contrasts in both elastic(Young's modulus and Poisson's ratio)and plastic(cohesion,friction angle,and dilation angle)parameters between layers.Four damage patterns were identifiedin the simulated models.The results also suggested that the number of impacts required to reach the critical damage was highly affected by the contrast in elastic parameters,while cohesion and friction angle contrasts had a lesser effect.Additionally,increasing the contrast in the dilation angle localized the damage,thus reducing the number of impacts required to trigger wellbore failure.展开更多
The atmospheric surface layer of the tropical coastal ocean is commonly very unstable and experiences weakwind conditions.How the latent(LE)and sensible(H)heat fluxes behave under such conditions are unclear because o...The atmospheric surface layer of the tropical coastal ocean is commonly very unstable and experiences weakwind conditions.How the latent(LE)and sensible(H)heat fluxes behave under such conditions are unclear because of the lack of observation stations in the tropics.Thus,this study aims to analyze LE and H and the microclimate parameters influencing them.The authors deployed an eddy covariance system in a tropical coastal region for seven months.The microclimate parameters investigated were wind speed(U),vapor pressure deficit(Δe),temperature difference(ΔT),wind-vapor pressure deficit(UΔe),wind-temperature difference(UΔT),and atmospheric stability(z/L),where z is height and L is the Monin–Obukhov length.On the daily time scale,the results show that LE was more associated with U thanΔe,while H was more related toΔT than U.Cross-wavelet analysis revealed the strong coherence in the LE-U relationship for periods between one and two days,and for H–ΔT,0.5 to 1 day.Correlation and regression analyses confirmed the time series analyses results,where strong positive correlation coefficients(r)were obtained between LE and U(r=0.494)and H andΔT(r=0.365).Compared to other water bodies,the transfer coefficient of moisture(CE N)was found to be small(=0.40×10^(-3))and independent of stability;conversely,the transfer coefficient of heat(CH N)was closer to literature values(=1.00×10^(-3))and a function of stability.展开更多
Molecular dynamics simulations were carried out to study the effect of chemical short-range order(CSRO)on the primary radiation damage in TiVTaNb high-entropy alloys(HEAs).We have performed displacement cascade simula...Molecular dynamics simulations were carried out to study the effect of chemical short-range order(CSRO)on the primary radiation damage in TiVTaNb high-entropy alloys(HEAs).We have performed displacement cascade simulations to explore the CSRO effect on the generation and evolution behaviors of irradiation defects.The results demonstrate that CSRO can suppress the formation of Frenkel pairs in TiVTaNb HEAs,with the suppression effect becoming more pronounced as the degree of CSRO increases.CSRO can change the types of interstitial defects generated during cascade collisions.Specifically,as the degree of CSRO increases,the proportion of Ti-related interstitials shows a marked enhancement,primarily evidenced by a significant rise in Ti–Ti dumbbells accompanied by a corresponding decrease in Ti–V dumbbells.CSRO exhibits negligible influence on defect clustering and the nucleation and evolution of dislocation loops.Regardless of CSRO conditions,TiVTaNb HEAs preserve exceptional radiation tolerance throughout the cascade damage process,suggesting that the intrinsic properties of this multi-principal element system dominate its radiation response.These findings provide fundamental insights into the CSRO effect on defect formation and evolution behaviors in HEAs,which may provide new design strategies for high-entropy alloys.展开更多
Integrated environmental management is important for sustainable development.Under China’s“Three Lines One Permit”(TLOP)policy,three types of management zones—priority protection,critical control,and general contr...Integrated environmental management is important for sustainable development.Under China’s“Three Lines One Permit”(TLOP)policy,three types of management zones—priority protection,critical control,and general control zones—are established based on the ecological red line,the lower-limit line for environmental quality,and the resource use line.Human activities are regulated through a permit system.Integrated and multifactorial protection of soil,plant,hydrological,and atmospheric elements is promoted at the regional level.A follow-up assessment contributes to the improvement of policy implementation and effectiveness.This study demonstrates the achievements of the TLOP policy in Sichuan Province.Results show that(1)276 protection zones have been established under the ecological red line,covering key ecosystems and protected areas to ensure environmental security.Under the lower-limit line,1,626 functional(priority,key,and general control)zones have been designated to regulate air,water,and soil quality,enhancing environmental capacity and pollution control.(2)Through the integration and merging of the three lines,1,128 integrated management zones have been established,including 375,625,and 128 priority protection,critical control,and general control zones,respectively.Each zone has its own list of environmental permits to regulate human activities according to different environmental protection and natural resource development regimes.(3)The design of the follow-up assessment index system was informed by regional primary functions and industrial structure.The index system for provinces and cities is structured around three primary indicators—implementation updating,application,and guarantees—and 15 secondary indicators.The system for critical control zones is structured around environmental access,management,and effectiveness and 14 secondary indicators.A stringent environmental zoning system has been established through the TLOP policy,thereby safeguarding environmental security,promoting harmonious existence between humans and nature,and supporting the vision of Beautiful China.展开更多
Currently,in the automotive industry,joining of the aluminum alloys with the steel is a crucial problem to be solved.Conventional joining techniques including resistance spot and gas metal arc welding are not acceptab...Currently,in the automotive industry,joining of the aluminum alloys with the steel is a crucial problem to be solved.Conventional joining techniques including resistance spot and gas metal arc welding are not acceptable for those applications due to a number of metallurgical problems.The investigation was carried out to develop the hybrid joining process combining the resistance spot welding and brazing.In this study,an attempt was made to apply hybrid process to the joining of dissimilar sheet metals,Al-Mg-Si（6000 series） alloy and low carbon steel sheet.Hybrid process（resistance spot weld/brazing） using filler metal was found to be effective to overcome the incompatibility between aluminum alloy and steel.Although hybrid joining process of Al alloy sheet and steel sheet did not produce acceptable bond strength,it was proved to have reasonable interfacial bond layer if the optimal process condition was applied.展开更多
Korea imports about 97% of its energy resources as its available energy resources are extremely limited. Thus, the role of nuclear power in electricity generation is expected to become more important in future years. ...Korea imports about 97% of its energy resources as its available energy resources are extremely limited. Thus, the role of nuclear power in electricity generation is expected to become more important in future years. A fast reactor system is one of the most promising options for electricity generation with an efficient utilization of uranium resources and a reduction of radioactive wastes. Based on the experiences gained during the development of the conceptual designs for KALIMER （Korea advanced liquid metal reactor）, the KAERI （Korea Atomic Energy Research Institute） is currently developing advanced SFR （sodium cooled fast reactor） design concepts that can better meet the Gen IV （Generation IV） technology goals. The long-term advanced SFR development plan will be carried out toward the construction of an advanced SFR demonstration plant by 2028. Advanced concept design studies and the development of the advanced SFR technologies necessary for its commercialization and basic key technologies carried out by KAERI are included in this paper.展开更多
Manufacturing of a product is constituted of the va ri ous attributes such as quality, cost, performance, and time to market. Manufactu ring can also be understood as the entire product realization process, from spec ...Manufacturing of a product is constituted of the va ri ous attributes such as quality, cost, performance, and time to market. Manufactu ring can also be understood as the entire product realization process, from spec ification through design and production to marketing and distribution. The induc tion of Information Technology (IT) in manufacturing includes the hardware that computes and communicates, the software that provides data, knowledge, and infor mation while at the same time controlling the hardware, and the interfaces betwe en computers and the tools and machines on the shop floor. The manufacturing pro cess utilizes IT in the design of products and processes, production, and manufa cturing-related business practices. IT applications applied to manufacturing helps in rapid shifts in production fro m one product to another, faster implementation of new concepts in products, fas ter delivery of products to customers, full utilization of capital and human res ources, streamlining of operations to focus on essential business needs, and eli mination of unnecessary or wasteful activities. IT can be used to meet a range of needs of manufacturing decision makers. It can be said that IT is an enabler and facilitator of radical change to culture of manufacturing which is highly co nservative for many good reasons. With increasing global competition, applications of global information technolog y is giving manufacturing unit an opportunity to increase control and enhance co ordination, while opening doors to new global markets and businesses. In some st udies conducted it ahs been shown that how information technology can produce pr oductivity gains and job losses in specific areas, whereas dynamic stability was also achieved through IT in some cases. In a study of an industry the IT has cu t manufacturers cost from eProcurement to web based supply chain management and after sales service. IT has certainly revolutionized the manufacturing and the i ndustries have completely redefined their business by switching over to World Wi de Web. This paper, attempts to review the significant advances and practical applicatio ns of information technology in the field of manufacturing.展开更多
AA6061 is a widely used aluminum alloy with significant applications in the aerospace and automotive industries.Despite its popularity,the utilization of additively manufactured AA6061 through the laser powder bed fus...AA6061 is a widely used aluminum alloy with significant applications in the aerospace and automotive industries.Despite its popularity,the utilization of additively manufactured AA6061 through the laser powder bed fusion(LPBF)process has been hindered by the pronounced formation of pores and cracks during rapid solidification.This study quantitatively investigated defects,including pores and cracks,and microstructures,including texture,grain size,subgrain structure,and precipitates,of LPBF-manufactured AA6061 across a broad spectrum of laser power and speed combinations.A high relative density of more than 99%was achieved with a low-power and low-speed condition,specifically 200 W and 100 mm s−1,with minimal cracks.Large pores,akin to or exceeding melt pool dimensions,emerged under either low or high energy densities,driven by the lack of fusion and vaporization/denudation mechanisms,re-spectively.Solidification cracks,confirmed by the fractography,were propagated along grain boundaries and are highly dependent on laser scanning speed.Elevated power and speed exhibited finer grain size with refined subgrain cellular structures and increased precipitates at interdendritic regions.The cooling rate and thermal gradient estimated from thermal analytical solutions explain the microstructures’char-acteristics.Nano-sized Si-Fe-Mg enriched precipitates are confirmed in both as-built and heat-treated conditions,whereas T6 heat treatment promotes a uniform distribution with coarsening of those precipi-tates.The low-power and low-speed conditions demonstrated the highest yield strength,consistent with defect levels.A minimum of 102.3%increase in yield strength with reduced ductility was observed after heat treatment for all examined conditions.This work sheds light on printing parameters to mitigate the formation of pores and cracks in additively manufactured AA6061,proposing a process window for op-timized fabrication and highlighting the potential for enhanced material properties and reduced defects through process control.展开更多
Water often presents significant challenges in catalysts by deactivating active sites,poisoning the reaction,and even degrading composite structure.These challenges are amplified when the water participates as a react...Water often presents significant challenges in catalysts by deactivating active sites,poisoning the reaction,and even degrading composite structure.These challenges are amplified when the water participates as a reactant and is fed as a liquid phase,such as trickle bed-type reactors in a hydrogen-water isotope exchange(HIE)reaction.The key balance in such multiphase reactions is the precise control of catalyst design to repel bulk liquid water while diffusing water vapor.Herein,a platinum-incorporated metal-organic framework(MIL-101)based bifunctional hydrophobic catalyst functionalized with long alkyl chains(C_(12),dodecylamine)and further manufactured with poly(vinylidene fluoride),Pt@MIL-101-12/PVDF,has been developed which can show dramatically improved catalytic activity under multi-phase reactions involving hydrogen gas and liquid water.Pt@MIL-101-12/PVDF demonstrates enhanced macroscopic water-blocking properties,with a notable reduction of over 65%in water adsorption capacity and newly introduced liquid water repellency.while exhibiting a negligible increase in mass transfer resistance,i.e.,bifunctional hydrophobicity.Excellent catalytic activity,evaluated via HIE reaction,and its durability underscore the impact of bifunctional hydrophobicity.In situ DRIFTS analysis elucidates water adsorption/desorption dynamics within the catalyst composite,highlighting reinforced water diffusion at the microscopic level,affirming the catalyst's bifunctionality in different length scales.With demonstrated radiation resistance,Pt@MIL-101-12/PVDF emerges as a promising candidate for isotope exchange reactions.展开更多
The efficiency of perovskite solar cells(PSCs)has progressed rapidly,exceeding 26%for single-junction devices and surpassing 34%in perovskite-silicon tandem configurations,establishing PSCs as a promising alternative ...The efficiency of perovskite solar cells(PSCs)has progressed rapidly,exceeding 26%for single-junction devices and surpassing 34%in perovskite-silicon tandem configurations,establishing PSCs as a promising alternative to traditional photovoltaic technologies.However,their commercialization is constrained by significant stability challenges in outdoor environments.This review critically examines key cell-level issues affecting the long-term performance and reliability of PSCs,focusing on instabilities arising from the intrinsic phases of the perovskite absorber and external stress factors.Mitigation strategies to enhance stability are discussed,alongside recent advancements in charge transport layers,electrodes,and interfaces aimed at reducing environmental degradation and improving energy level alignment for efficient charge extraction.The importance of accelerated aging tests and the establishment of standardized protocols is underscored for accurately predicting device lifetimes and identifying failure mechanisms,thereby ensuring stability under real-world conditions.Furthermore,a comprehensive techno-economic analysis evaluates how advancements in materials and strategic innovations influence efficiency,durability,and cost,which are critical for the commercial adoption of PSCs.This review delineates the essential steps required to transition PSC technology from laboratory-scale research to widespread commercialization within the global photovoltaic industry.展开更多
High-pressure die cast(HPDC)AZ91 magnesium alloy is widely used in automotive components such as transmission housings and brackets for its excellent strength-to-weight ratio.Zinc-based cold spray coatings can be appl...High-pressure die cast(HPDC)AZ91 magnesium alloy is widely used in automotive components such as transmission housings and brackets for its excellent strength-to-weight ratio.Zinc-based cold spray coatings can be applied selectively to vulnerable areas to enhance corrosion resistance,minimize galvanic coupling with dissimilar metals,and eliminate the need for full-surface oxide coatings,making the process more efficient and targeted.A comprehensive evaluation of 16 combinations of nitrogen carrier gas temperatures and pressures led to the identification of an optimal range of process parameters,yielding Zn coatings with porosity<0.5% by area,wear rates reduced by a factor of two compared to uncoated AZ91,and adhesion strengths up to 35 MPa.The enhanced mechanical performance of the coating is attributed to the low porosity and the formation of a metallurgical bond at the coating-substrate interface.Corrosion studies using macroscale potentiodynamic polarization(PDP)and electrochemical impedance spectroscopy(EIS)revealed a significant decrease in corrosion rate and a shift to more noble corrosion potentials(ZCP)for coated substrates.Furthermore,the Zn cold-sprayed samples exhibited significantly lower corrosioninduced evolved hydrogen content compared to the base AZ91 substrate and AZ91 coated with industrial coatings,demonstrating that the Zn layer effectively protects the substrate from the corrosive environment.Overall,cold spray Zn coatings significantly improve the mechanical and corrosion performance of AZ91 Mg alloys,addressing key material challenges and enabling their broader use in automotive applications.展开更多
In this article,we commented on the work done by Jiang et al,where they syn-thesized a kakkatin derivative,6-(hept-6-yn-1-yloxy)-3-(4-hydroxyphenyl)-7-me-thoxy-4H-chromen-4-one(HK),and investigated its antitumor activ...In this article,we commented on the work done by Jiang et al,where they syn-thesized a kakkatin derivative,6-(hept-6-yn-1-yloxy)-3-(4-hydroxyphenyl)-7-me-thoxy-4H-chromen-4-one(HK),and investigated its antitumor activities and me-chanism in gastric cancer MGC803 and hepatocellular carcinoma(HCC)SMMC-7721 cells.HK was evaluated for its antitumor activity as compared to kakkatin and cisplatin.This article focused on various risk factors of HCC,the mechanism of HCC progression and molecular targets of the kakkatin derivative,and limi-tations of available treatment options.HCC is a predominant form of primary liver cancer characterized by the accumulation of multiple gene modifications,overexpression of protooncogenes,altered immune microenvironment,and infilt-ration by immune cells.Puerariae flos(PF)has been used in traditional medicine in China,Korea,and Japan for lung clearing,spleen awakening,and relieving alcohol hangovers.PF exerts antitumor activity by inhibiting cancer cell prolif-eration,invasion,and migration.PF induces apoptosis in alcoholic HCC via the estrogen-receptor 1-extracellular signal-regulated kinases 1/2 signaling pathway.Kakkatin isolated from PF is known as a hepatoprotective bioflavonoid.The ka-kkatin derivative,HK,exhibited anticancer activity against HCC cell lines by in-hibiting cell proliferation and upregulating nuclear factor kappa B subunit 1 and phosphodiesterase 3B.However,further preclinical and clinical studies are required to establish its therapeutic potential against HCC.展开更多
Treelines are ecologically unique,fragile,and rich in natural resources.They harbour high species diversity and at the same time are under threat due to anthropogenic activities.Recognizing this,the present study has ...Treelines are ecologically unique,fragile,and rich in natural resources.They harbour high species diversity and at the same time are under threat due to anthropogenic activities.Recognizing this,the present study has been framed to document the patterns of species richness and diversity in the state of Himachal Pradesh,western Himalaya.A total of six treeline sites(three disturbed and three undisturbed)were identified for vegetation sampling.Trees,shrubs,and herbs were sampled at each site using nested plots of 10 m^(2),5 m^(2),and 1 m^(2),respectively.The study exhibits the rich diversity of treeline communities,the patterns of which varied between treeline sites.Altogether,221 species of vascular plants belonging to 47 families and 140 genera were recorded from the area.Amongst families,Asteraceae was the dominant family followed by Apiaceae and Ranunculaceae.The study also revealed the presence of threatened species like Aconitum heterophyllum,Angelica glauca,Bergenia stracheyi,Dactylorhiza hatagirea,Picrorhiza kurroa,and Trillium govanianum etc.at treeline.Moreover,species composition revealed high densities of Betula utilis followed by the under canopy of Rhododendron campanulatum and R.anthopogon at treeline sites.Overall,species richness of herbs,shrubs,and trees were higher at undisturbed site as compared to disturbed one.The diversity indices of herbs and shrubs varied significantly between treeline sites while that of trees was non-significant.At the same time,soil properties showed distinct patterns wherein pH and available nitrogen significantly varied between treeline sites.Present study provides detailed insights into the floristic and ecological aspects of treeline communities from the unexplored ecoregion of western Himalaya.The treelines in the area are anthropogenically depressed and continued land-use activities might result in habitat fragmentation and displacement of plant communities in the near future.展开更多
This study introduces a lightweight deep learning model and a novel synthetic dataset designed to restore damaged one-dimensional(1D)barcodes and Quick Response(QR)codes,addressing critical challenges in logistics ope...This study introduces a lightweight deep learning model and a novel synthetic dataset designed to restore damaged one-dimensional(1D)barcodes and Quick Response(QR)codes,addressing critical challenges in logistics operations.The proposed solution leverages an efficient Pix2Pix-based framework,a type of conditional Generative Adversarial Network(GAN)optimized for image-to-image translation tasks,enabling the recovery of degraded barcodes and QR codes with minimal computational overhead.A core contribution of this work is the development of a synthetic dataset that simulates realistic damage scenarios frequently encountered in logistics environments,such as low contrast,misalignment,physical wear,and environmental interference.By training on this diverse and realistic dataset,the model demonstrates exceptional performance in restoring readability and decoding accuracy.The lightweight architecture,featuring a U-Net-based encoder-decoder with separable convolutions,ensures computational efficiency,making the approach suitable for real-time deployment on embedded and resource-constrained devices commonly used in logistics systems.Experimental results reveal significant improvements:QR code decoding ratios increased from 14%to 99%on training data and from 15%to 68%on validation data,while 1D barcode decoding ratios improved from 7%to 73%on training data and from 9%to 44%on validation data.By providing a robust,resource-efficient solution for restoring damaged barcodes and QR codes,this study offers practical advancements for enhancing the reliability of automated scanning systems in logistics operations,particularly under challenging conditions.展开更多
The eutectic point is a critical parameter in the phase diagrams of solid–liquid equilibrium. In this study, high-pressure differential thermal analysis(HPDTA) was utilized to measure the melting temperatures of Fe–...The eutectic point is a critical parameter in the phase diagrams of solid–liquid equilibrium. In this study, high-pressure differential thermal analysis(HPDTA) was utilized to measure the melting temperatures of Fe–C alloy(3.4–4.2 wt.% C)under 5 GPa and to plot the liquidus temperature curves spanning from hypoeutectic to hypereutectic compositions. Our results indicate that under 5 GPa, the carbon content at the eutectic point of the Fe–C alloy decreases to 3.6–3.7 wt.%C, representing a reduction of approximately 0.6 wt.% C compared to the atmospheric pressure value(4.3 wt.% C). Concurrently, the eutectic temperature rises to 1195℃, showing an elevation of 48℃relative to the atmospheric pressure condition(1147℃). Microstructural analysis, x-ray diffraction(XRD), and hardness tests further corroborate these findings, demonstrating that high pressure significantly suppresses the solubility of carbon in γ-Fe, resulting in a decrease in the eutectic carbon content. Additionally, the hardness of the Fe–C alloy under 5 GPa is increased by more than 50% compared to that of the same type of Fe–C alloy under atmospheric pressure. This study provides essential experimental data for constructing high-pressure Fe–C phase diagrams and offers valuable insights for the design of high-performance Fe-based materials under extreme conditions.展开更多
Environmental concerns over synthetic dyes,including water pollution and high energy demands,have driven interest in sustainable alternatives.This research investigates the colouration of polyamide 6(nylon 6)textiles ...Environmental concerns over synthetic dyes,including water pollution and high energy demands,have driven interest in sustainable alternatives.This research investigates the colouration of polyamide 6(nylon 6)textiles using a natural dye derived from the mature pods of Cassia fistula,which serve as a source of anthraquinone-based pigments.The study systematically evaluated the influence of dyeing parameters-namely temperature(30-90℃),duration(10-60 min),pH range(4-11),dye concentration(10%-70%owf),and post-mordanting using alum,ferrous sulfate,and stannous chloride-on the resulting colour strength(K/S)and CIE Lab*coordinates.The fastness characteristics of polyamide 6 fabric were assessed,with the corresponding results detailed in the subsequent sections.Maximum dye absorption was achieved at 90℃for 60 minutes under acidic conditions(pH 4),and from the conditions was given K/S 2.242.An increase in dye concentration led to higher K/S values,which were further augmented by mordanting,with aluminum potassium sulfate and stannous chloride yielding the greatest results.Colour fastness assessments indicated good to excellent resistance to washing,water exposure,rubbing,and perspiration,all of the properties were up to 4.Whereas resistance to light was found from 1 to 2.The findings confirm Cassia fistula extract as a renewable,eco-friendly dye for polyamide 6,offering commercially viable colour strength and fastness while supporting sustainable textile processing.展开更多
Investigating the influence of radiation on glass fibre composites is essential for their use in space and aerospace environment.Gaining insight into the damage mechanisms caused by gamma irradiation,can improve the s...Investigating the influence of radiation on glass fibre composites is essential for their use in space and aerospace environment.Gaining insight into the damage mechanisms caused by gamma irradiation,can improve the safety and resilience of structures.This paper is aimed at investigating the failure mode and damage of gamma-irradiated repurposed pultruded glass fibre-reinforced polyester subjected to lowvelocity impact using three types of non-destructive techniques.Three sets of differently layered configurations(CRC,WCRW,W2CR2C)consisting of chopped(c),roving(r),and weaved(w)fibre-reinforced polyester are applied in this study.Drop hammer test is applied to evaluate the low-impact resistance properties of Gamma-irradiated composite at 100 kGy,500 kGy,and 1000 kGy.Preliminary flexural and hardness tests are conducted to further assess the behaviour of irradiated polymer composites.Further,the damage modes associated with the low-impact test are characterised using infrared thermography,flat panel digital radiography,and microscope observation.The results show that the composites irradiated with various doses display good impact resistance at 20 J,presenting minor damages in the form of dents on the surface.The irradiated CRC and WCRW display best impact resistance at 500 kGy,while W2CR2C at 1000 kGy.This shows that the layering sequence of reinforcement fibre can influence the impact resistance of irradiated composites.Apart from that,the application of non-destructive techniques show different damage mechanisms in the form resin cracks,yarn splitting/fracture,and matrix splitting when the composites are exposed at high and low irradiation doses.These findings offer valuable data for the defence industry,particularly in the areas of repair,maintenance,and the development of new materials.展开更多
The yield of maize(Zea mays L.)is highly influenced by nitrogen fertilization.This study investigated the impact of nitrogen fertilization on morphophysiological traits in maize(Zea mays L.)and developed algorithms to...The yield of maize(Zea mays L.)is highly influenced by nitrogen fertilization.This study investigated the impact of nitrogen fertilization on morphophysiological traits in maize(Zea mays L.)and developed algorithms to relate manual phenotyping and digital phenotyping of maize with leaf nitrogen and digital field image traits.The experiment included three hybrid maize varieties,V1(Hybrid 981),V2(BARI Hybrid maize-9),and V3(Hybrid P3396),which were evaluated across three nitrogen levels(N1=100 kg N ha^(−1),N2=200 kg N ha^(−1),N3=300 kg N ha^(−1))in a split-plot design with three replications.The results revealed that nitrogen levels(N),varieties(V),and their interactions(V×N)significantly influenced traits such as plant height(PH),leaf area index(LAI),normalized difference vegetation index(NDVI),canopy cover(CC),chlorophyll content(Chl a and Chl b),leaf nitrogen content(LNC),total dry matter(TDM),and grain yield.The hybrid P3396 with 300 kg N ha^(−1)(V3N3)achieved the highest grain yield of 14.45 t ha^(−1),which was statistically similar to that of Hybrid 981 and 300 kg N ha^(−1)(V1N3).Nitrogen significantly improved dry matter accumulation,leaf area,and physiological parameters,with maximum values recorded during flowering.The NDVI,CC,and SPAD were strongly correlated with LNC and TDM,highlighting their potential as indicators for nitrogen management.The digital imaging traits analysed via software effectively differentiated the nitrogen treatments,demonstrating their utility for precise nitrogen application.In conclusion,nitrogen fertilization at 300 kg N ha^(−1) optimized the growth and yield of hybrid maize,with Hybrid P3396 performing best.This study underscores the role of advanced phenotyping tools in improving nitrogen use efficiency and sustainable maize production.展开更多
We demonstrate for the first time the critical influence of binder molecular weight on the performance of slurry-cast lithium nickel manganese cobalt oxide(NMC)cathodes in sulfide-based all-solid-state batteries(SSBs)...We demonstrate for the first time the critical influence of binder molecular weight on the performance of slurry-cast lithium nickel manganese cobalt oxide(NMC)cathodes in sulfide-based all-solid-state batteries(SSBs).SSBs are increasingly recognized as a safer and potentially more efficient alternative to traditional Li-ion batteries,owing to the superior ionic conductivities and inherent safety features of sulfide solid electrolytes.However,the integration of high-voltage NMC cathodes with sheet-type sulfide solid electrolytes presents significant fabrication challenges.Our findings reveal that higher molecular weight binders not only enhance the discharge capacity and cycle life of these cathodes but also ensure robust adhesion and structural integrity.By optimizing binder molecular weights,we effectively shield the active materials from degradation and mechanical stress,significantly boosting the functionality and longevity of SSBs.These results underscore the paramount importance of binder properties in advancing the practical application of high-performance all-solid-state batteries.展开更多
文摘This article presents findings from an extensive experimental program conducted by the French Agency for the Management of Radioactive Waste(ANDRA)at its Underground Research Laboratory.The focus of the study is the NSC(Noyau de SCellement)experiment,designed to assess the performance of a sealing core composed of a mixture of 40%bentonite and 60%sand.The objective is to evaluate in situ hydraulic permeability,swelling behavior,and gas performance of the seal,which are essential components for the safe disposal of Intermediate-Level(IL)and High-Level Radioactive Waste(HLW)in deep geological repositories.The experimental setup,construction details of the NSC experiment,and the timeline of the project,from excavation,construction of the seal,and artificial hydration to hydraulic permeability tests,are comprehensively described.Andra has acquired valuable expertise in constructing an engineered barrier system,encompassing concrete plugs,and efficiently assembling a 5-m-long seal.Over the past decade,a controlled water injection process has been employed to hydrate the seal.The operational efficiency of sensors has been evaluated,with pore pressure sensors exhibiting moderate performance.In contrast,others,including total pressure,capacitive humidity,psychrometric humidity,and saturation sensors,demonstrate excellent performance up to their operational limits.The high-quality data obtained from this experiment will facilitate the modeling of the resaturation and hydraulic-gas performance of the seal.
基金support from the Research Council of Norway,Equinor,and Sekal with NFR project(Grant No.308826).
文摘Drill string vibration during drilling plays a vital and potentially decisive role in maintaining wellbore stability,as repeated impacts may lead to fatigue and borehole collapse.While drilling through geological layers,a material contrast may act as a localization point for wellbore damage.The hypothesis tested in this paper is that wellbore instability is focused on the boundary between the layers and that mechanical contrasts accelerate the wellbore collapse.In this study,an elastic-plastic damage model was employed to investigate the effects of repeated mechanical impacts on wellbore stability.A 2-dimensional(2D)model of a wellbore surrounded by contrasting materials was developed,and the accumulated damage caused by repeated lateral impacts was monitored.It was found that damage develops not only around the wall of the wellbore but also along the material boundaries.A sensitivity analysis was carried out to identify the impact of contrasts in both elastic(Young's modulus and Poisson's ratio)and plastic(cohesion,friction angle,and dilation angle)parameters between layers.Four damage patterns were identifiedin the simulated models.The results also suggested that the number of impacts required to reach the critical damage was highly affected by the contrast in elastic parameters,while cohesion and friction angle contrasts had a lesser effect.Additionally,increasing the contrast in the dilation angle localized the damage,thus reducing the number of impacts required to trigger wellbore failure.
基金supported by a PETRONAS-Academia Collabora-tion Dialogue 2022 Grant[Grant number PACD 2022]from PETRONAS Research Sdn.Bhd。
文摘The atmospheric surface layer of the tropical coastal ocean is commonly very unstable and experiences weakwind conditions.How the latent(LE)and sensible(H)heat fluxes behave under such conditions are unclear because of the lack of observation stations in the tropics.Thus,this study aims to analyze LE and H and the microclimate parameters influencing them.The authors deployed an eddy covariance system in a tropical coastal region for seven months.The microclimate parameters investigated were wind speed(U),vapor pressure deficit(Δe),temperature difference(ΔT),wind-vapor pressure deficit(UΔe),wind-temperature difference(UΔT),and atmospheric stability(z/L),where z is height and L is the Monin–Obukhov length.On the daily time scale,the results show that LE was more associated with U thanΔe,while H was more related toΔT than U.Cross-wavelet analysis revealed the strong coherence in the LE-U relationship for periods between one and two days,and for H–ΔT,0.5 to 1 day.Correlation and regression analyses confirmed the time series analyses results,where strong positive correlation coefficients(r)were obtained between LE and U(r=0.494)and H andΔT(r=0.365).Compared to other water bodies,the transfer coefficient of moisture(CE N)was found to be small(=0.40×10^(-3))and independent of stability;conversely,the transfer coefficient of heat(CH N)was closer to literature values(=1.00×10^(-3))and a function of stability.
基金Project supported by the Youth Program of the National Natural Science Foundation of China(Grant No.12405324)the CNNC Science Fund for Talented Young Scholars(Grant No.24940)the CNNC Basic Science Fund(Grant No.24851)。
文摘Molecular dynamics simulations were carried out to study the effect of chemical short-range order(CSRO)on the primary radiation damage in TiVTaNb high-entropy alloys(HEAs).We have performed displacement cascade simulations to explore the CSRO effect on the generation and evolution behaviors of irradiation defects.The results demonstrate that CSRO can suppress the formation of Frenkel pairs in TiVTaNb HEAs,with the suppression effect becoming more pronounced as the degree of CSRO increases.CSRO can change the types of interstitial defects generated during cascade collisions.Specifically,as the degree of CSRO increases,the proportion of Ti-related interstitials shows a marked enhancement,primarily evidenced by a significant rise in Ti–Ti dumbbells accompanied by a corresponding decrease in Ti–V dumbbells.CSRO exhibits negligible influence on defect clustering and the nucleation and evolution of dislocation loops.Regardless of CSRO conditions,TiVTaNb HEAs preserve exceptional radiation tolerance throughout the cascade damage process,suggesting that the intrinsic properties of this multi-principal element system dominate its radiation response.These findings provide fundamental insights into the CSRO effect on defect formation and evolution behaviors in HEAs,which may provide new design strategies for high-entropy alloys.
基金supported by the National Natural Science Foundation of China(grant numbers 42171085)and the National Key R&D Program of China(Grant No.2024YFF1307801,2024YFF1307804).
文摘Integrated environmental management is important for sustainable development.Under China’s“Three Lines One Permit”(TLOP)policy,three types of management zones—priority protection,critical control,and general control zones—are established based on the ecological red line,the lower-limit line for environmental quality,and the resource use line.Human activities are regulated through a permit system.Integrated and multifactorial protection of soil,plant,hydrological,and atmospheric elements is promoted at the regional level.A follow-up assessment contributes to the improvement of policy implementation and effectiveness.This study demonstrates the achievements of the TLOP policy in Sichuan Province.Results show that(1)276 protection zones have been established under the ecological red line,covering key ecosystems and protected areas to ensure environmental security.Under the lower-limit line,1,626 functional(priority,key,and general control)zones have been designated to regulate air,water,and soil quality,enhancing environmental capacity and pollution control.(2)Through the integration and merging of the three lines,1,128 integrated management zones have been established,including 375,625,and 128 priority protection,critical control,and general control zones,respectively.Each zone has its own list of environmental permits to regulate human activities according to different environmental protection and natural resource development regimes.(3)The design of the follow-up assessment index system was informed by regional primary functions and industrial structure.The index system for provinces and cities is structured around three primary indicators—implementation updating,application,and guarantees—and 15 secondary indicators.The system for critical control zones is structured around environmental access,management,and effectiveness and 14 secondary indicators.A stringent environmental zoning system has been established through the TLOP policy,thereby safeguarding environmental security,promoting harmonious existence between humans and nature,and supporting the vision of Beautiful China.
文摘Currently,in the automotive industry,joining of the aluminum alloys with the steel is a crucial problem to be solved.Conventional joining techniques including resistance spot and gas metal arc welding are not acceptable for those applications due to a number of metallurgical problems.The investigation was carried out to develop the hybrid joining process combining the resistance spot welding and brazing.In this study,an attempt was made to apply hybrid process to the joining of dissimilar sheet metals,Al-Mg-Si（6000 series） alloy and low carbon steel sheet.Hybrid process（resistance spot weld/brazing） using filler metal was found to be effective to overcome the incompatibility between aluminum alloy and steel.Although hybrid joining process of Al alloy sheet and steel sheet did not produce acceptable bond strength,it was proved to have reasonable interfacial bond layer if the optimal process condition was applied.
文摘Korea imports about 97% of its energy resources as its available energy resources are extremely limited. Thus, the role of nuclear power in electricity generation is expected to become more important in future years. A fast reactor system is one of the most promising options for electricity generation with an efficient utilization of uranium resources and a reduction of radioactive wastes. Based on the experiences gained during the development of the conceptual designs for KALIMER （Korea advanced liquid metal reactor）, the KAERI （Korea Atomic Energy Research Institute） is currently developing advanced SFR （sodium cooled fast reactor） design concepts that can better meet the Gen IV （Generation IV） technology goals. The long-term advanced SFR development plan will be carried out toward the construction of an advanced SFR demonstration plant by 2028. Advanced concept design studies and the development of the advanced SFR technologies necessary for its commercialization and basic key technologies carried out by KAERI are included in this paper.
文摘Manufacturing of a product is constituted of the va ri ous attributes such as quality, cost, performance, and time to market. Manufactu ring can also be understood as the entire product realization process, from spec ification through design and production to marketing and distribution. The induc tion of Information Technology (IT) in manufacturing includes the hardware that computes and communicates, the software that provides data, knowledge, and infor mation while at the same time controlling the hardware, and the interfaces betwe en computers and the tools and machines on the shop floor. The manufacturing pro cess utilizes IT in the design of products and processes, production, and manufa cturing-related business practices. IT applications applied to manufacturing helps in rapid shifts in production fro m one product to another, faster implementation of new concepts in products, fas ter delivery of products to customers, full utilization of capital and human res ources, streamlining of operations to focus on essential business needs, and eli mination of unnecessary or wasteful activities. IT can be used to meet a range of needs of manufacturing decision makers. It can be said that IT is an enabler and facilitator of radical change to culture of manufacturing which is highly co nservative for many good reasons. With increasing global competition, applications of global information technolog y is giving manufacturing unit an opportunity to increase control and enhance co ordination, while opening doors to new global markets and businesses. In some st udies conducted it ahs been shown that how information technology can produce pr oductivity gains and job losses in specific areas, whereas dynamic stability was also achieved through IT in some cases. In a study of an industry the IT has cu t manufacturers cost from eProcurement to web based supply chain management and after sales service. IT has certainly revolutionized the manufacturing and the i ndustries have completely redefined their business by switching over to World Wi de Web. This paper, attempts to review the significant advances and practical applicatio ns of information technology in the field of manufacturing.
基金Savannah River National Laboratory(SRNL).SRNL is operated by Battelle Savannah River Alliance,LLC under Contract No 89303321CEM000080 for the US Department of Energy.
文摘AA6061 is a widely used aluminum alloy with significant applications in the aerospace and automotive industries.Despite its popularity,the utilization of additively manufactured AA6061 through the laser powder bed fusion(LPBF)process has been hindered by the pronounced formation of pores and cracks during rapid solidification.This study quantitatively investigated defects,including pores and cracks,and microstructures,including texture,grain size,subgrain structure,and precipitates,of LPBF-manufactured AA6061 across a broad spectrum of laser power and speed combinations.A high relative density of more than 99%was achieved with a low-power and low-speed condition,specifically 200 W and 100 mm s−1,with minimal cracks.Large pores,akin to or exceeding melt pool dimensions,emerged under either low or high energy densities,driven by the lack of fusion and vaporization/denudation mechanisms,re-spectively.Solidification cracks,confirmed by the fractography,were propagated along grain boundaries and are highly dependent on laser scanning speed.Elevated power and speed exhibited finer grain size with refined subgrain cellular structures and increased precipitates at interdendritic regions.The cooling rate and thermal gradient estimated from thermal analytical solutions explain the microstructures’char-acteristics.Nano-sized Si-Fe-Mg enriched precipitates are confirmed in both as-built and heat-treated conditions,whereas T6 heat treatment promotes a uniform distribution with coarsening of those precipi-tates.The low-power and low-speed conditions demonstrated the highest yield strength,consistent with defect levels.A minimum of 102.3%increase in yield strength with reduced ductility was observed after heat treatment for all examined conditions.This work sheds light on printing parameters to mitigate the formation of pores and cracks in additively manufactured AA6061,proposing a process window for op-timized fabrication and highlighting the potential for enhanced material properties and reduced defects through process control.
基金supported by grants from the National Research Foundation of Korea(NRF)under grant No.RS-2022-00155422 and No.2021R1C1C102014。
文摘Water often presents significant challenges in catalysts by deactivating active sites,poisoning the reaction,and even degrading composite structure.These challenges are amplified when the water participates as a reactant and is fed as a liquid phase,such as trickle bed-type reactors in a hydrogen-water isotope exchange(HIE)reaction.The key balance in such multiphase reactions is the precise control of catalyst design to repel bulk liquid water while diffusing water vapor.Herein,a platinum-incorporated metal-organic framework(MIL-101)based bifunctional hydrophobic catalyst functionalized with long alkyl chains(C_(12),dodecylamine)and further manufactured with poly(vinylidene fluoride),Pt@MIL-101-12/PVDF,has been developed which can show dramatically improved catalytic activity under multi-phase reactions involving hydrogen gas and liquid water.Pt@MIL-101-12/PVDF demonstrates enhanced macroscopic water-blocking properties,with a notable reduction of over 65%in water adsorption capacity and newly introduced liquid water repellency.while exhibiting a negligible increase in mass transfer resistance,i.e.,bifunctional hydrophobicity.Excellent catalytic activity,evaluated via HIE reaction,and its durability underscore the impact of bifunctional hydrophobicity.In situ DRIFTS analysis elucidates water adsorption/desorption dynamics within the catalyst composite,highlighting reinforced water diffusion at the microscopic level,affirming the catalyst's bifunctionality in different length scales.With demonstrated radiation resistance,Pt@MIL-101-12/PVDF emerges as a promising candidate for isotope exchange reactions.
基金supported by a National Research Foundation of Korea(NRF)grant(No.2016R1A3B 1908249),funded by the Korean government.
文摘The efficiency of perovskite solar cells(PSCs)has progressed rapidly,exceeding 26%for single-junction devices and surpassing 34%in perovskite-silicon tandem configurations,establishing PSCs as a promising alternative to traditional photovoltaic technologies.However,their commercialization is constrained by significant stability challenges in outdoor environments.This review critically examines key cell-level issues affecting the long-term performance and reliability of PSCs,focusing on instabilities arising from the intrinsic phases of the perovskite absorber and external stress factors.Mitigation strategies to enhance stability are discussed,alongside recent advancements in charge transport layers,electrodes,and interfaces aimed at reducing environmental degradation and improving energy level alignment for efficient charge extraction.The importance of accelerated aging tests and the establishment of standardized protocols is underscored for accurately predicting device lifetimes and identifying failure mechanisms,thereby ensuring stability under real-world conditions.Furthermore,a comprehensive techno-economic analysis evaluates how advancements in materials and strategic innovations influence efficiency,durability,and cost,which are critical for the commercial adoption of PSCs.This review delineates the essential steps required to transition PSC technology from laboratory-scale research to widespread commercialization within the global photovoltaic industry.
基金the support of the U.S.Department of Energy’s Vehicle Technologies Office.
文摘High-pressure die cast(HPDC)AZ91 magnesium alloy is widely used in automotive components such as transmission housings and brackets for its excellent strength-to-weight ratio.Zinc-based cold spray coatings can be applied selectively to vulnerable areas to enhance corrosion resistance,minimize galvanic coupling with dissimilar metals,and eliminate the need for full-surface oxide coatings,making the process more efficient and targeted.A comprehensive evaluation of 16 combinations of nitrogen carrier gas temperatures and pressures led to the identification of an optimal range of process parameters,yielding Zn coatings with porosity<0.5% by area,wear rates reduced by a factor of two compared to uncoated AZ91,and adhesion strengths up to 35 MPa.The enhanced mechanical performance of the coating is attributed to the low porosity and the formation of a metallurgical bond at the coating-substrate interface.Corrosion studies using macroscale potentiodynamic polarization(PDP)and electrochemical impedance spectroscopy(EIS)revealed a significant decrease in corrosion rate and a shift to more noble corrosion potentials(ZCP)for coated substrates.Furthermore,the Zn cold-sprayed samples exhibited significantly lower corrosioninduced evolved hydrogen content compared to the base AZ91 substrate and AZ91 coated with industrial coatings,demonstrating that the Zn layer effectively protects the substrate from the corrosive environment.Overall,cold spray Zn coatings significantly improve the mechanical and corrosion performance of AZ91 Mg alloys,addressing key material challenges and enabling their broader use in automotive applications.
基金Supported by the Indian Council of Scientific and Industrial Research,No.MLP0204(CSIR-IHBT no.5712).
文摘In this article,we commented on the work done by Jiang et al,where they syn-thesized a kakkatin derivative,6-(hept-6-yn-1-yloxy)-3-(4-hydroxyphenyl)-7-me-thoxy-4H-chromen-4-one(HK),and investigated its antitumor activities and me-chanism in gastric cancer MGC803 and hepatocellular carcinoma(HCC)SMMC-7721 cells.HK was evaluated for its antitumor activity as compared to kakkatin and cisplatin.This article focused on various risk factors of HCC,the mechanism of HCC progression and molecular targets of the kakkatin derivative,and limi-tations of available treatment options.HCC is a predominant form of primary liver cancer characterized by the accumulation of multiple gene modifications,overexpression of protooncogenes,altered immune microenvironment,and infilt-ration by immune cells.Puerariae flos(PF)has been used in traditional medicine in China,Korea,and Japan for lung clearing,spleen awakening,and relieving alcohol hangovers.PF exerts antitumor activity by inhibiting cancer cell prolif-eration,invasion,and migration.PF induces apoptosis in alcoholic HCC via the estrogen-receptor 1-extracellular signal-regulated kinases 1/2 signaling pathway.Kakkatin isolated from PF is known as a hepatoprotective bioflavonoid.The ka-kkatin derivative,HK,exhibited anticancer activity against HCC cell lines by in-hibiting cell proliferation and upregulating nuclear factor kappa B subunit 1 and phosphodiesterase 3B.However,further preclinical and clinical studies are required to establish its therapeutic potential against HCC.
基金the Ministry of Environment Forest and Climate Change and GB Pant National Institute of Himalayan Environment for providing financial assistance through the National Mission on Himalayan Studies (GAP-0199)
文摘Treelines are ecologically unique,fragile,and rich in natural resources.They harbour high species diversity and at the same time are under threat due to anthropogenic activities.Recognizing this,the present study has been framed to document the patterns of species richness and diversity in the state of Himachal Pradesh,western Himalaya.A total of six treeline sites(three disturbed and three undisturbed)were identified for vegetation sampling.Trees,shrubs,and herbs were sampled at each site using nested plots of 10 m^(2),5 m^(2),and 1 m^(2),respectively.The study exhibits the rich diversity of treeline communities,the patterns of which varied between treeline sites.Altogether,221 species of vascular plants belonging to 47 families and 140 genera were recorded from the area.Amongst families,Asteraceae was the dominant family followed by Apiaceae and Ranunculaceae.The study also revealed the presence of threatened species like Aconitum heterophyllum,Angelica glauca,Bergenia stracheyi,Dactylorhiza hatagirea,Picrorhiza kurroa,and Trillium govanianum etc.at treeline.Moreover,species composition revealed high densities of Betula utilis followed by the under canopy of Rhododendron campanulatum and R.anthopogon at treeline sites.Overall,species richness of herbs,shrubs,and trees were higher at undisturbed site as compared to disturbed one.The diversity indices of herbs and shrubs varied significantly between treeline sites while that of trees was non-significant.At the same time,soil properties showed distinct patterns wherein pH and available nitrogen significantly varied between treeline sites.Present study provides detailed insights into the floristic and ecological aspects of treeline communities from the unexplored ecoregion of western Himalaya.The treelines in the area are anthropogenically depressed and continued land-use activities might result in habitat fragmentation and displacement of plant communities in the near future.
基金supported by the Scientific and Technological Research Council of Turkey(TÜB˙ITAK)through the Industrial R&D Projects Grant Program(TEYDEB)under Project No.3211077(grant recipient:Metin Kahraman)。
文摘This study introduces a lightweight deep learning model and a novel synthetic dataset designed to restore damaged one-dimensional(1D)barcodes and Quick Response(QR)codes,addressing critical challenges in logistics operations.The proposed solution leverages an efficient Pix2Pix-based framework,a type of conditional Generative Adversarial Network(GAN)optimized for image-to-image translation tasks,enabling the recovery of degraded barcodes and QR codes with minimal computational overhead.A core contribution of this work is the development of a synthetic dataset that simulates realistic damage scenarios frequently encountered in logistics environments,such as low contrast,misalignment,physical wear,and environmental interference.By training on this diverse and realistic dataset,the model demonstrates exceptional performance in restoring readability and decoding accuracy.The lightweight architecture,featuring a U-Net-based encoder-decoder with separable convolutions,ensures computational efficiency,making the approach suitable for real-time deployment on embedded and resource-constrained devices commonly used in logistics systems.Experimental results reveal significant improvements:QR code decoding ratios increased from 14%to 99%on training data and from 15%to 68%on validation data,while 1D barcode decoding ratios improved from 7%to 73%on training data and from 9%to 44%on validation data.By providing a robust,resource-efficient solution for restoring damaged barcodes and QR codes,this study offers practical advancements for enhancing the reliability of automated scanning systems in logistics operations,particularly under challenging conditions.
基金Project supported by the National Key Research and Development Program of China (Grant No. 2023YFA1406200)。
文摘The eutectic point is a critical parameter in the phase diagrams of solid–liquid equilibrium. In this study, high-pressure differential thermal analysis(HPDTA) was utilized to measure the melting temperatures of Fe–C alloy(3.4–4.2 wt.% C)under 5 GPa and to plot the liquidus temperature curves spanning from hypoeutectic to hypereutectic compositions. Our results indicate that under 5 GPa, the carbon content at the eutectic point of the Fe–C alloy decreases to 3.6–3.7 wt.%C, representing a reduction of approximately 0.6 wt.% C compared to the atmospheric pressure value(4.3 wt.% C). Concurrently, the eutectic temperature rises to 1195℃, showing an elevation of 48℃relative to the atmospheric pressure condition(1147℃). Microstructural analysis, x-ray diffraction(XRD), and hardness tests further corroborate these findings, demonstrating that high pressure significantly suppresses the solubility of carbon in γ-Fe, resulting in a decrease in the eutectic carbon content. Additionally, the hardness of the Fe–C alloy under 5 GPa is increased by more than 50% compared to that of the same type of Fe–C alloy under atmospheric pressure. This study provides essential experimental data for constructing high-pressure Fe–C phase diagrams and offers valuable insights for the design of high-performance Fe-based materials under extreme conditions.
文摘Environmental concerns over synthetic dyes,including water pollution and high energy demands,have driven interest in sustainable alternatives.This research investigates the colouration of polyamide 6(nylon 6)textiles using a natural dye derived from the mature pods of Cassia fistula,which serve as a source of anthraquinone-based pigments.The study systematically evaluated the influence of dyeing parameters-namely temperature(30-90℃),duration(10-60 min),pH range(4-11),dye concentration(10%-70%owf),and post-mordanting using alum,ferrous sulfate,and stannous chloride-on the resulting colour strength(K/S)and CIE Lab*coordinates.The fastness characteristics of polyamide 6 fabric were assessed,with the corresponding results detailed in the subsequent sections.Maximum dye absorption was achieved at 90℃for 60 minutes under acidic conditions(pH 4),and from the conditions was given K/S 2.242.An increase in dye concentration led to higher K/S values,which were further augmented by mordanting,with aluminum potassium sulfate and stannous chloride yielding the greatest results.Colour fastness assessments indicated good to excellent resistance to washing,water exposure,rubbing,and perspiration,all of the properties were up to 4.Whereas resistance to light was found from 1 to 2.The findings confirm Cassia fistula extract as a renewable,eco-friendly dye for polyamide 6,offering commercially viable colour strength and fastness while supporting sustainable textile processing.
基金funded by Universiti Tenaga Nasional(UNITEN),Malaysia for supporting this research under the Dato'Low Tuck Kwong International Grant,project code 20238002DLTKsupport for this work from the Ministry of Higher EducationMalaysia through the Higher Institution Center of Excellence(HICoE 2023-JPT(BPKI)1000/016/018/34(5))program+2 种基金supported by Tenaga Nasional Berhad(TNB)and UNITEN through the BOLD Refresh Postdoctoral Fellowships under Grant J510050002-IC-6 BOLDREFRESH2023-Centre of ExcellencePrince Sultan University for their supportIndustrial Technology Division,Malaysian Nuclear Agency for their support in this research work.
文摘Investigating the influence of radiation on glass fibre composites is essential for their use in space and aerospace environment.Gaining insight into the damage mechanisms caused by gamma irradiation,can improve the safety and resilience of structures.This paper is aimed at investigating the failure mode and damage of gamma-irradiated repurposed pultruded glass fibre-reinforced polyester subjected to lowvelocity impact using three types of non-destructive techniques.Three sets of differently layered configurations(CRC,WCRW,W2CR2C)consisting of chopped(c),roving(r),and weaved(w)fibre-reinforced polyester are applied in this study.Drop hammer test is applied to evaluate the low-impact resistance properties of Gamma-irradiated composite at 100 kGy,500 kGy,and 1000 kGy.Preliminary flexural and hardness tests are conducted to further assess the behaviour of irradiated polymer composites.Further,the damage modes associated with the low-impact test are characterised using infrared thermography,flat panel digital radiography,and microscope observation.The results show that the composites irradiated with various doses display good impact resistance at 20 J,presenting minor damages in the form of dents on the surface.The irradiated CRC and WCRW display best impact resistance at 500 kGy,while W2CR2C at 1000 kGy.This shows that the layering sequence of reinforcement fibre can influence the impact resistance of irradiated composites.Apart from that,the application of non-destructive techniques show different damage mechanisms in the form resin cracks,yarn splitting/fracture,and matrix splitting when the composites are exposed at high and low irradiation doses.These findings offer valuable data for the defence industry,particularly in the areas of repair,maintenance,and the development of new materials.
基金supported by the Bangladesh Agricultural Research Insti-tute,Gazipur-1701,Bangladesh.This research was also funded by Taif University,Saudi Arabia,Project No.(TU-DSPP-2024-07).
文摘The yield of maize(Zea mays L.)is highly influenced by nitrogen fertilization.This study investigated the impact of nitrogen fertilization on morphophysiological traits in maize(Zea mays L.)and developed algorithms to relate manual phenotyping and digital phenotyping of maize with leaf nitrogen and digital field image traits.The experiment included three hybrid maize varieties,V1(Hybrid 981),V2(BARI Hybrid maize-9),and V3(Hybrid P3396),which were evaluated across three nitrogen levels(N1=100 kg N ha^(−1),N2=200 kg N ha^(−1),N3=300 kg N ha^(−1))in a split-plot design with three replications.The results revealed that nitrogen levels(N),varieties(V),and their interactions(V×N)significantly influenced traits such as plant height(PH),leaf area index(LAI),normalized difference vegetation index(NDVI),canopy cover(CC),chlorophyll content(Chl a and Chl b),leaf nitrogen content(LNC),total dry matter(TDM),and grain yield.The hybrid P3396 with 300 kg N ha^(−1)(V3N3)achieved the highest grain yield of 14.45 t ha^(−1),which was statistically similar to that of Hybrid 981 and 300 kg N ha^(−1)(V1N3).Nitrogen significantly improved dry matter accumulation,leaf area,and physiological parameters,with maximum values recorded during flowering.The NDVI,CC,and SPAD were strongly correlated with LNC and TDM,highlighting their potential as indicators for nitrogen management.The digital imaging traits analysed via software effectively differentiated the nitrogen treatments,demonstrating their utility for precise nitrogen application.In conclusion,nitrogen fertilization at 300 kg N ha^(−1) optimized the growth and yield of hybrid maize,with Hybrid P3396 performing best.This study underscores the role of advanced phenotyping tools in improving nitrogen use efficiency and sustainable maize production.
基金partially sponsored by the Office of Energy Efficiency and Renewable Energy(EERE)in the Vehicle Technologies Office(VTO)through the Advanced Battery Materials Research(BMR)Program,managed by DrsThe Department of Energy will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan(http://energy.gov/downloads/doe-public-access-plan).
文摘We demonstrate for the first time the critical influence of binder molecular weight on the performance of slurry-cast lithium nickel manganese cobalt oxide(NMC)cathodes in sulfide-based all-solid-state batteries(SSBs).SSBs are increasingly recognized as a safer and potentially more efficient alternative to traditional Li-ion batteries,owing to the superior ionic conductivities and inherent safety features of sulfide solid electrolytes.However,the integration of high-voltage NMC cathodes with sheet-type sulfide solid electrolytes presents significant fabrication challenges.Our findings reveal that higher molecular weight binders not only enhance the discharge capacity and cycle life of these cathodes but also ensure robust adhesion and structural integrity.By optimizing binder molecular weights,we effectively shield the active materials from degradation and mechanical stress,significantly boosting the functionality and longevity of SSBs.These results underscore the paramount importance of binder properties in advancing the practical application of high-performance all-solid-state batteries.
