Based on analyzing the conservation of energy of penetrator with enhanced lateral efficiency （PELE） the penetrating against metal target, a theoretical expression predicting the residual velocity of PELE perforating...Based on analyzing the conservation of energy of penetrator with enhanced lateral efficiency （PELE） the penetrating against metal target, a theoretical expression predicting the residual velocity of PELE perforating the target is obtained. By modifying De Marre semi-experience formula,the ballistic limit velocities of PELE penetrating into 2024 aluminum alloy and 45# steel targets are also given. The theoretical predictions fit well with experimental or simulative results.展开更多
Magnesium-substituted Mn0.8Zn0.2Fe2O4 ferrite is synthesized by the sol–gel combustion method using citrate acid as the complex agent. The electromagnetic absorbing behaviors of ferrite/polymer coatings fabricated by...Magnesium-substituted Mn0.8Zn0.2Fe2O4 ferrite is synthesized by the sol–gel combustion method using citrate acid as the complex agent. The electromagnetic absorbing behaviors of ferrite/polymer coatings fabricated by dispersing Mn–Zn ferrite into epoxy resin （EP） are studied. The microstructure and morphology are characterized by X-ray diffraction and scanning electron microscope. Complex permittivity, complex permeability, and reflection loss of ferrite/EP composite coating are investigated in a low frequency range. It is found that the prepared ferrite particles are traditional cubic spinel ferrite particles with an average size of 200 nm. The results reveal that the electromagnetic microwave absorbing properties are significantly influenced by the weight ratio of ferrite to polymer. The composites with a weight ratio of ferrite/polymer being 3：20 have a maximum reflection loss of –16 dB and wide absorbing band. Thus, the Mn–Zn ferrite is the potential candidate in electromagnetic absorbing application in the low frequency range （10 MHz–1 GHz）.展开更多
A reasonable heat treatment process for TC4 ELI titanium alloy is crucial to tune microstructures to improve its explosion resistance.However,there is limited investigation on tuning microstructures of TC4 ELI to impr...A reasonable heat treatment process for TC4 ELI titanium alloy is crucial to tune microstructures to improve its explosion resistance.However,there is limited investigation on tuning microstructures of TC4 ELI to improve explosion resistance.Moreover,the current challenge is quantifying microstructural changes'effects on explosion resistance and incorporating microstructural changes into finite element models.This work aims to tune microstructures to improve explosion resistance and elucidate their anti-explosion mechanism,and find a suitable method to incorporate microstructural changes into finite element models.In this work,we systematically study the deformation and failure characteristics of TC4 ELI plates with varying microstructures using an air explosion test and LS-DYNA finite element modeling.The Johnson-Cook(JC)constitutive parameters are used to quantify the effects of microstructural changes on explosion resistance and incorporate microstructural changes into finite element models.Because of the heat treatment,one plate has equiaxed microstructure and the other has bimodal microstructure.The convex of the plate after the explosion has a quadratic relationship with the charge mass,and the simulation results demonstrate high reliability,with the error less than 17.5%.Therefore,it is feasible to obtain corresponding JC constitutive parameters based on the differences in microstructures and mechanical properties and characterize the effects of microstructural changes on explosion resistance.The bimodal target exhibits excellent deformation resistance.The response of bimodal microstructure to the shock wave may be more intense under explosive loading.The well-coordinated structure of the bimodal target enhances its resistance to deformation.展开更多
By changing the length-diameter ratios and inner-to-outer diameter ratios, some numerical simulations were made on PELE normal penetrating metal target using AUTODYN-3D code. The influence rules of length-diameter rat...By changing the length-diameter ratios and inner-to-outer diameter ratios, some numerical simulations were made on PELE normal penetrating metal target using AUTODYN-3D code. The influence rules of length-diameter ratio and inner-to-outer diameter ratio to the terminal effect of PELE are obtained. When the length-diameter ratio is in the range of 4-7, inner-to-outer diameter ratio is in the range of 0.54-0.72, the PELE can perform satisfactory double terminal effects embodied in armor-piercing and fragment killing. Based on simulation results, a test projectile is designed and an impact experiment of PELE is carried out, which demonstrate the efficiency of the simulation method.展开更多
In order to investigate safety character of solid propellant, the truing process was analyzed by a thermalmechanical coupled finite element method. Based on the viscoelastic integral constitutive relation, the tempera...In order to investigate safety character of solid propellant, the truing process was analyzed by a thermalmechanical coupled finite element method. Based on the viscoelastic integral constitutive relation, the temperature response in truing process was calculated. The result showed that the maximum temperature in solid propellant truing process could attain up to 65 ℃ when the truing velocity was 10 mm/s and the truing thickness was 1 mm, and there was no remarkable temperature change under the truing thickness of 1.0 mm, 1.5 mm and 2.5 mm. The hazard in truing process of solid propellant was mainly close to the edge of cutting area.展开更多
The pressure evolution associated with the transient shock-induced infiltration of gas flow through granular media consisting of mobile particles is numerically investigated using a coupled Eulerian–Lagrangian approa...The pressure evolution associated with the transient shock-induced infiltration of gas flow through granular media consisting of mobile particles is numerically investigated using a coupled Eulerian–Lagrangian approach.The coupling between shock compaction and interstitial flow has been revealed.A distinctive two-stage diffusing pressure field with deflection occurring at the tail of the compaction front is found,with corresponding spikes in both gaseous velocity and temperature profiles emerging within the width of the compaction front.The compaction front,together with the deflection pressure,reaches a steady state during the later period.An analytical prediction of the steady deflection pressure that considers the contributions of porosity and the non-isothermal effect is proposed.The isothermal single-phase method we developed,combining the porosity jump condition across the compaction front,shows consistent pressure evolution with the non-isothermal CMP-PIC one under weak shock strength and low column permeability.Lastly,the microscale mechanism governing the formation of not only pressure deflection but also gaseous velocity and temperature spikes within the width of the compaction front has been described.These aforementioned evolutions of the flow field are shown to arise from the nozzling effects associated with the particle-scale variations in the volume fraction.展开更多
文摘Based on analyzing the conservation of energy of penetrator with enhanced lateral efficiency （PELE） the penetrating against metal target, a theoretical expression predicting the residual velocity of PELE perforating the target is obtained. By modifying De Marre semi-experience formula,the ballistic limit velocities of PELE penetrating into 2024 aluminum alloy and 45# steel targets are also given. The theoretical predictions fit well with experimental or simulative results.
基金Project supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20121101110014)
文摘Magnesium-substituted Mn0.8Zn0.2Fe2O4 ferrite is synthesized by the sol–gel combustion method using citrate acid as the complex agent. The electromagnetic absorbing behaviors of ferrite/polymer coatings fabricated by dispersing Mn–Zn ferrite into epoxy resin （EP） are studied. The microstructure and morphology are characterized by X-ray diffraction and scanning electron microscope. Complex permittivity, complex permeability, and reflection loss of ferrite/EP composite coating are investigated in a low frequency range. It is found that the prepared ferrite particles are traditional cubic spinel ferrite particles with an average size of 200 nm. The results reveal that the electromagnetic microwave absorbing properties are significantly influenced by the weight ratio of ferrite to polymer. The composites with a weight ratio of ferrite/polymer being 3：20 have a maximum reflection loss of –16 dB and wide absorbing band. Thus, the Mn–Zn ferrite is the potential candidate in electromagnetic absorbing application in the low frequency range （10 MHz–1 GHz）.
基金National Key Laboratory of Science and Technology on Materials under Shock and Impact(Grant No.WDZC2022-4)to provide fund for conducting experiments。
文摘A reasonable heat treatment process for TC4 ELI titanium alloy is crucial to tune microstructures to improve its explosion resistance.However,there is limited investigation on tuning microstructures of TC4 ELI to improve explosion resistance.Moreover,the current challenge is quantifying microstructural changes'effects on explosion resistance and incorporating microstructural changes into finite element models.This work aims to tune microstructures to improve explosion resistance and elucidate their anti-explosion mechanism,and find a suitable method to incorporate microstructural changes into finite element models.In this work,we systematically study the deformation and failure characteristics of TC4 ELI plates with varying microstructures using an air explosion test and LS-DYNA finite element modeling.The Johnson-Cook(JC)constitutive parameters are used to quantify the effects of microstructural changes on explosion resistance and incorporate microstructural changes into finite element models.Because of the heat treatment,one plate has equiaxed microstructure and the other has bimodal microstructure.The convex of the plate after the explosion has a quadratic relationship with the charge mass,and the simulation results demonstrate high reliability,with the error less than 17.5%.Therefore,it is feasible to obtain corresponding JC constitutive parameters based on the differences in microstructures and mechanical properties and characterize the effects of microstructural changes on explosion resistance.The bimodal target exhibits excellent deformation resistance.The response of bimodal microstructure to the shock wave may be more intense under explosive loading.The well-coordinated structure of the bimodal target enhances its resistance to deformation.
文摘By changing the length-diameter ratios and inner-to-outer diameter ratios, some numerical simulations were made on PELE normal penetrating metal target using AUTODYN-3D code. The influence rules of length-diameter ratio and inner-to-outer diameter ratio to the terminal effect of PELE are obtained. When the length-diameter ratio is in the range of 4-7, inner-to-outer diameter ratio is in the range of 0.54-0.72, the PELE can perform satisfactory double terminal effects embodied in armor-piercing and fragment killing. Based on simulation results, a test projectile is designed and an impact experiment of PELE is carried out, which demonstrate the efficiency of the simulation method.
文摘In order to investigate safety character of solid propellant, the truing process was analyzed by a thermalmechanical coupled finite element method. Based on the viscoelastic integral constitutive relation, the temperature response in truing process was calculated. The result showed that the maximum temperature in solid propellant truing process could attain up to 65 ℃ when the truing velocity was 10 mm/s and the truing thickness was 1 mm, and there was no remarkable temperature change under the truing thickness of 1.0 mm, 1.5 mm and 2.5 mm. The hazard in truing process of solid propellant was mainly close to the edge of cutting area.
基金supported by National Natural Science Foundation of China(Grants No.11972088,No.12122203).
文摘The pressure evolution associated with the transient shock-induced infiltration of gas flow through granular media consisting of mobile particles is numerically investigated using a coupled Eulerian–Lagrangian approach.The coupling between shock compaction and interstitial flow has been revealed.A distinctive two-stage diffusing pressure field with deflection occurring at the tail of the compaction front is found,with corresponding spikes in both gaseous velocity and temperature profiles emerging within the width of the compaction front.The compaction front,together with the deflection pressure,reaches a steady state during the later period.An analytical prediction of the steady deflection pressure that considers the contributions of porosity and the non-isothermal effect is proposed.The isothermal single-phase method we developed,combining the porosity jump condition across the compaction front,shows consistent pressure evolution with the non-isothermal CMP-PIC one under weak shock strength and low column permeability.Lastly,the microscale mechanism governing the formation of not only pressure deflection but also gaseous velocity and temperature spikes within the width of the compaction front has been described.These aforementioned evolutions of the flow field are shown to arise from the nozzling effects associated with the particle-scale variations in the volume fraction.
