X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system ...X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system generally has a large scale,which is not suitable for on-site testing.Compared with the S-band(S-linac)at the same stage of beam energy,the accelerator working in the X-band(X-linac)can compress the facility scale by over 2/3 in the longitudinal direction,which is convenient for the on-site NDT of electrical equipment.To address the beam quality and design complexity simultaneously,the non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ),which is a multi-objective genetic algorithm(MOGA),was developed to optimize the cavity chain design of the X-linac.Additionally,the designs of the focusing coils,electron gun,and RF couplers,which are other key components of the X-linac,were introduced in this context.In particular,the focusing coil distributions were optimized using a genetic algorithm.Furthermore,after designing such key components,PARMELA software was adopted to perform beam dynamics calculations with the optimized accelerating fields and magnetic fields.The results show that the beam performance was obtained with a capture ratio of more than 90%,an energy spread of less than 10%,and an average energy of approximately 3 MeV.The design and simulation results indicate that the proposed NSGAⅡ-based approach is feasible for X-linac accelerator design.Furthermore,it can be generalized as a universal technique for industrial electron linear accelerators provided that specific optimization objectives and constraints are set according to different application scenarios and requirements.展开更多
Electron beam injectors are pivotal components of large-scale scientific instruments,such as synchrotron radiation sources,free-electron lasers,and electron-positron colliders.The quality of the electron beam produced...Electron beam injectors are pivotal components of large-scale scientific instruments,such as synchrotron radiation sources,free-electron lasers,and electron-positron colliders.The quality of the electron beam produced by the injector critically influences the performance of the entire accelerator-based scientific research apparatus.The injectors of such facilities usually use photocathode and thermionic-cathode electron guns.Although the photocathode injector can produce electron beams of excellent quality,its associated laser system is massive and intricate.The thermionic-cathode electron gun,especially the gridded electron gun injector,has a simple structure capable of generating numerous electron beams.However,its emittance is typically high.In this study,methods to reduce beam emittance are explored through a comprehensive analysis of various grid structures and preliminary design results,examining the evolution of beam phase space at different grid positions.An optimization method for reducing the emittance of a gridded thermionic-cathode electron gun is proposed through theoretical derivation,electromagnetic-field simulation,and beam-dynamics simulation.A 50%reduction in emittance was achieved for a 50 keV,1.7 A electron gun,laying the foundation for the subsequent design of a high-current,low-emittance injector.展开更多
Solid-state electrolytes with high oxidation stability are crucial for achieving high power density allsolid-state lithium batteries.Halide electrolytes are promising candidates due to their outstanding compatibility ...Solid-state electrolytes with high oxidation stability are crucial for achieving high power density allsolid-state lithium batteries.Halide electrolytes are promising candidates due to their outstanding compatibility with cathode materials and high Li^(+)conductivity.However,the electrochemical stability of chloride electrolytes is still limited,leaving them unsuitable for ultrahigh voltage operation.Besides,chemical compatibility issue between sulfide and halide electrolytes affects the electrochemical performance of all-solid-state batteries.Herein,Li-ion conductor Li_(3+x)InCl_(6-x)O_(x) is designed to address these challenges.Li_(3.25)InCl_(5.75)O_(0.25)shows a Li-ion conductivity of 0.90 mS cm^(-1)at room temperature,a high onset oxidation voltage of 3.84 V,fewer by-products at ultrahigh operation voltage,and good chemical compatibility with Li_(5.5)PS_(4.5)Cl_(1.5).The Li_(3.25)InCl_(5.75)O_(0.25)@LiNi_(0.7)Co_(0.1)Mn_(0.2)O_(2)-Li_(3.25)InCl_(5.75)O_(0.25)-VGCF/Li_(3.25)InCl_(5.75)O_(0.25)/Li_(5.5)PS_(4.5)Cl_(1.5)/Li-In battery delivers good electrochemical performances at high operating voltage.This work provides a simple,economical,and effective strategy for designing high-voltage all-solid-state electrolytes.展开更多
The field-reversed configuration(FRC)plasma thruster driven by rotating magnetic field(RMF),abbreviated as the RMF-FRC thruster,is a new type of electric propulsion technology that is expected to accelerate the deep s...The field-reversed configuration(FRC)plasma thruster driven by rotating magnetic field(RMF),abbreviated as the RMF-FRC thruster,is a new type of electric propulsion technology that is expected to accelerate the deep space exploration.An experimental prototype,including diagnostic devices,was designed and constructed based on the principles of the RMF-FRC thruster,with an RMF frequency of 210 kHz and a maximum peak current of 2 kA.Under the rated operating conditions,the initial plasma density was measured to be 5×10^(17)m^(-3),and increased to 2.2×10^(19)m^(-3)after the action of RMF.The coupling efficiency of RMF was about 53%,and the plasma current reached 1.9 kA.The axial magnetic field changed in reverse by 155 Gauss,successfully reversing the bias magnetic field of 60 Gauss,which verifies the formation of FRC plasma.After optimization research,it was found that when the bias magnetic field is 100 Gauss,the axial magnetic field reverse variation caused by FRC is the highest at 164 Gauss.The experimental results are discussed and strategies are proposed to improve the performance of the prototype.展开更多
Currently,although some progress has been made in infancy-stage rocking-chair aqueous zinc-ion batteries(AZIBs),more discussions have focused only on the different electrochemical performances displayed by different m...Currently,although some progress has been made in infancy-stage rocking-chair aqueous zinc-ion batteries(AZIBs),more discussions have focused only on the different electrochemical performances displayed by different material types rather than the intrinsic ion transport migration electrochemistry.Herein,we for the first time delve into the mechanism of tailoring the solvation sheath and desolvation processes at the electrode/electrolyte interfaces to enhance the structural stabilities in the deep discharge states.In this work,the TiO_(2)front interfaces are induced on electrochemically active but unstable TiSe_(2)host materials to construct unique TiO_(2)/TiSe_(2)-C heterointerfaces.According to X-ray absorption near edge structure(XANES),differential electrochemical mass spectrometry(DEMS),and electrochemical quartz crystal microbalance(EQCM),the intercalated species are transformed from[Zn(H_(2)O)_(6)]^(2+)to[Zn(H_(2)O)_(2)]^(2+)due to the built-in electric fields(BEFs)effects,further accelerating the ion transfer kinetics.Furthermore,owing to the absence of high-energy desolvation solvents released from desolvation processes,hydrogen evolution reaction(HER)energy barriers,Ti-Se bond strength,and structural stabilities are significantly improved,and the initial CE and HER overpotentials of the TiO_(2)/TiSe_(2)-C heterointerfaces increased from 13.76%to 84.7%,and from 1.04 to 1.30 V,respectively,and the H2 precipitation current density even at-1.3 V decreased by 73.2%.This work provides valuable insights into the complex interface electrochemical mechanism of tailoring the solvation sheath and desolvation processes toward rocking-chair zinc-ion batteries.展开更多
Solvated zinc ions are prone to undergo desolvation at the electrode/electrolyte interfaces,and unstable H_(2)O molecules within the solvated sheaths tend to trigger hydrogen evolution reaction(HER),further accelerati...Solvated zinc ions are prone to undergo desolvation at the electrode/electrolyte interfaces,and unstable H_(2)O molecules within the solvated sheaths tend to trigger hydrogen evolution reaction(HER),further accelerating interfaces decay.Herein,we propose for the first time a novel strategy to enhance the interfacial stabilities by insitu dynamic reconstruction of weakly solvated Zn2þduring the desolvation processes at heterointerfaces.Theoretical calculations indicate that,due to built-in electric field effects(BEFs),the plating/stripping mechanism shifts from[Zn(H_(2)O)_(6)]_(2)þto[Zn(H_(2)O)_(5)(SO_(4))^(2-)]_(2)þwithout additional electrolyte additives,reducing the solvation ability of H_(2)O,enhancing the competitive coordination of SO_(4)^(2-),essentially eliminating the undesirable side effects of anodes.Hence,symmetric cells can operate stably for 3000 h(51.7-times increase in cycle life),and the full cells can operate stably for 5000 cycles(51.5-times increase in cycle life).This study provides valuable insights into the critical design of weakly solvated Zn^(2+) þand desolvation processes at heterointerfaces.展开更多
The dynamics of network power response play a crucial role in system stability.However,the integration of power electronic equipment leads to amplitude and angular frequency(abbreviated as"frequency")time-va...The dynamics of network power response play a crucial role in system stability.However,the integration of power electronic equipment leads to amplitude and angular frequency(abbreviated as"frequency")time-varying characteristics of the node voltage during dynamic processes.As a result,traditional calcu-lation methods for and characteristics of the power response of the network based on phasor and impe-dance lose their validity.Therefore,this paper undertakes mathematical calculations to reveal the power response of a network under excitation by voltage with time-varying amplitude and frequency(TVAF),relying on the original mathematical relationships and superimposed step response.Then,the multi-timescale characteristics of both the active and reactive power of the network are explored physically.Additionally,this paper reveals a new phenomenon of storing and releasing the active and reactive power of the network.To meet practical engineering requirements,a simplified power expression is presented.Finally,the theoretical analysis is validated through time-domain simulations.展开更多
Explorations into new electrolytes have highlighted the critical impact of solvation structure on battery performance,Classical molecular dynamics(CMD)using semi-empirical force fields has become an essential tool for...Explorations into new electrolytes have highlighted the critical impact of solvation structure on battery performance,Classical molecular dynamics(CMD)using semi-empirical force fields has become an essential tool for simulating solvation structures.However,mainstream force fields often lack accuracy in describing strong ion-solvent interactions,causing disparities between CMD simulations and experimental observations.Although some empirical methods have been employed in some of the studies to address this issue,their effectiveness has been limited.Our CMD research,supported by quantum chemical calculations and experimental data,reveals that the solvation structure is influenced not only by the charge model but also by the polarization description.Previous empirical approaches that focused solely on adjusting ion-solvent interaction strengths overlooked the importance of polarization effects.Building on this insight,we propose integrating the Drude polarization model into mainstream force fields and verify its feasibility in carbonate,ether,and nitrile electrolytes.Our experimental results demonstrate that this approach significantly enhances the accuracy of CMD-simulated solvation structures.This work is expected to provide a more reliable CMD method for electrolyte design,shielding researchers from the pitfalls of erroneous simulation outcomes.展开更多
A large number of runaway electrons(REs)generated during disruption can cause significant damage to next-generation large-scale tokamaks.The influence of three-dimensional(3D)helical magnetic perturbations on the supp...A large number of runaway electrons(REs)generated during disruption can cause significant damage to next-generation large-scale tokamaks.The influence of three-dimensional(3D)helical magnetic perturbations on the suppression of RE generation was explored using a set of 3D helical coils in J-TEXT tokamak,which can excite m/n=-2/2 helical magnetic perturbations.Experimental evidence shows that the-2/2 magnetic perturbations caused by the opposite coil current direct plasma toward the high-field side,simultaneously enhancing the magnetic fluctuations,which would enhance the radial loss of REs and even prevent RE generation.On the other hand,-2/2 magnetic perturbations can also reduce the cooling time during the disruption phase and generate a population of high-energy REs,which can interact with high-frequency magnetic fluctuations and in turn suppress RE generation.The critical helical coil current was found to correlate with electron density,requiring higher coil currents at higher densities.According to the statistical analysis of RE generation at different electron densities,the applied-2/2 magnetic perturbations can increase the magnetic fluctuations to the same level at lower electron densities,which can decrease the threshold electron density for RE suppression.This will be beneficial for RE mitigation in future large tokamak devices.展开更多
As the core component of energy conversion for large wind turbines,the output performance of doubly-fed induction generators (DFIGs) plays a decisive role in the power quality of wind turbines.To realize the fast and ...As the core component of energy conversion for large wind turbines,the output performance of doubly-fed induction generators (DFIGs) plays a decisive role in the power quality of wind turbines.To realize the fast and accurate design optimization of DFIGs,this paper proposes a novel hybriddriven surrogate-assisted optimization method.It firstly establishes an accurate subdomain model of DFIGs to analytically predict performance indexes.Furthermore,taking the inexpensive analytical dataset produced by the subdomain model as the source domain and the expensive finite element analysis dataset as the target domain,a high-precision surrogate model is trained in a transfer learning way and used for the subsequent multi-objective optimization process.Based on this model,taking the total harmonic distortion of electromotive force,cogging torque,and iron loss as objectives,and the slot and inner/outer diameters as parameters for optimizing the topology,achieve a rapid and accurate electromagnetic design for DFIGs.Finally,experiments are carried out on a 3MW DFIG to validate the effectiveness of the proposed method.展开更多
The application of superconducting(SC)technology enables magnets to excite strong fields with small footprints,which has great potential for miniaturizing proton therapy gantries.However,the slow ramping rate of SC ma...The application of superconducting(SC)technology enables magnets to excite strong fields with small footprints,which has great potential for miniaturizing proton therapy gantries.However,the slow ramping rate of SC magnets results in a low treatment efficiency compared with normal-conducting(NC)gantries.To address this problem,this study proposes a compact proton therapy gantry design with a large momentum acceptance utilizing alternating-gradient canted-cosine-theta(AG-CCT)SC magnets.In our design,a high-transmission degrader is mounted in the middle of the gantry,and the upstream beamline employs NC magnets with small apertures.Downstream of the degrader,large-bore AG-CCT magnets with strong alternating focusing gradients are set symmetrically as a local achromat,which realizes a momentum acceptance of 20%(or 40%in the energy domain).Therefore,only three magnetic working points are required to cover a treatment energy of 70-230 Me V.Owing to the large momentum acceptance,the proton beam after the degrader can be directly delivered to the isocenter without truncating its energy spectrum,which can significantly increase the treatment efficiency but causes severe dispersion effects during pencil beam scanning.Therefore,a compensation method was introduced by tuning the normal and skewed quadrupoles during the scanning process.As a result,the new gantry not only presents a remarkable reduction in the size and weight of the facility but also shows good potential for fast treatment.展开更多
An advanced spectral diagnostic system was developed to measure the electron temperature(T_(e)),electron density(N_(e)),and ion temperature(T_(i))of the Huazhong University of Science and Technology field-reversed con...An advanced spectral diagnostic system was developed to measure the electron temperature(T_(e)),electron density(N_(e)),and ion temperature(T_(i))of the Huazhong University of Science and Technology field-reversed configuration plasma.The system consists of an optic fiber spectrometer with a wide spectral band and a 670 mm focal length high throughout Czerny-Turner monochromator equipped with both a 3600 g mm^(-1)grating and a 2400 g mm^(-1)grating to measure the line spectrum.Accompanying these components is an electronmultiplying charge-coupled device camera to capture spectral data.The relative intensity of the optical fiber spectrometer was calibrated using a standard luminance source,and the wavelength calibration of the spectrometer was accomplished using a Hg/Ar lamp.This diagnostic setup was configured to measure electron density based on the Stark effect of H_γ(n=5→n=2;434.04 nm).Doppler broadening of an OⅢ(2s^(2)2p(^(2)P^(0))3p→2s^(2)2p(^(2)P^(0))3s;375.988 nm)emission line was measured and analyzed to obtain the ion temperature,and electron temperatures were estimated from the relative strength of H_(β)(n=4→n=2;486.14 nm)(D_(β))and H_(γ)(D_(γ))spectral lines when the electron density was obtained from Stark effect measurements.The initial experimental results indicate that the highest electron temperature of the formation region was approximately 8 eV,the electron density of the colliding-and-merging region was approaching 10^(20)m^(-3),and the ion temperature reached about 40 eV.展开更多
The discharge morphology of pulsed dielectric barrier discharge(PDBD) plays important roles in its applications. Here, we systematically investigated the effects of the voltage amplitude,discharge gap, and O_(2)conten...The discharge morphology of pulsed dielectric barrier discharge(PDBD) plays important roles in its applications. Here, we systematically investigated the effects of the voltage amplitude,discharge gap, and O_(2)content on the PDBD morphology, and revealed the possible underlying mechanism of the U-shaped formation. First, the morphological evolution under different conditions was recorded. A unique U-shaped region appears in the middle edge region when the gap is larger than 2 mm, while the entire discharge region remains columnar under a 2 mm gap in He PDBD. The width of the discharge and the U-shaped region increase with the increase in voltage, and decrease with the increase of the gap and O_(2)content. To explain this phenomenon,a two-dimensional symmetric model was developed to simulate the spatiotemporal evolution of different species and calculate the electric thrust. The discharge morphology evolution directly corresponds to the excited-state atomic reduction process. The electric thrust on the charged particles mainly determines the reaction region and strongly influences the U-shaped formation.When the gap is less than 2 mm, the electric thrust is homogeneous throughout the entire region,resulting in a columnar shape. However, when the gap is larger than 2 mm or O_(2)is added, the electric thrust in the edge region becomes greater than that in the middle, leading to the U-shaped formation. Furthermore, in He PDBD, the charged particles generating electric thrust are mainly electrons and helium ions, while in He/O_(2)PDBD those that generate electric thrust at the outer edge of the electrode surface are mainly various oxygen-containing ions.展开更多
On J-TEXT,the temporal evolution of heat flux distribution on the high-field side(HFS)divertor plate has been measured by an infrared(IR)camera during the plasma operation with an island divertor configuration.In expe...On J-TEXT,the temporal evolution of heat flux distribution on the high-field side(HFS)divertor plate has been measured by an infrared(IR)camera during the plasma operation with an island divertor configuration.In experiments,the island divertor configuration is an edge magnetic island chain structure surrounded by stochastic layers,which can be induced by resonant magnetic perturbations(RMPs).The experimental results show that the heat flux distribution on the HFS target plate depends significantly on the edge magnetic topology.Furthermore,the impact of hydrogen fueling using supersonic molecular beam injection(SMBI)on the divertor heat flux distributions is studied on J-TEXT with an island divertor configuration.It has been observed that power detachment can be achieved when the radiation front approaches the last closed flux surface(LCFS)after each SMBI pulse.This result may provide a method of access for divertor detachment on a fusion device with a three-dimensional(3D)boundary magnetic structure.展开更多
Density limit has long been a widely studied issue influencing the operating range of tokamaks.The rapid growth of the m/n=2/1(where m and n are poloidal and toroidal mode numbers,respectively)tearing mode is generall...Density limit has long been a widely studied issue influencing the operating range of tokamaks.The rapid growth of the m/n=2/1(where m and n are poloidal and toroidal mode numbers,respectively)tearing mode is generally regarded as a primary precursor to the density limit disruption.In this experiment,the coupling of the m/n=1/1 mode and the m/n=2/1 mode in highdensity plasma was observed.During a sawtooth cycle,the frequencies of the two modes gradually converge until they become equal.After that,toroidal coupling occurs between the 1/1 and 2/1 modes,resulting in a mutually fixed phase relationship.With the occurrence of toroidal coupling,the 2/1 mode is stabilized.Prior to the disruption,the cessation of the 1/1 and 2/1 mode coupling,along with the rapid growth in the amplitude of the 2/1 mode,can be observed.Additionally,under the same parameters,comparing discharges with or without the 1/1 mode,it is found that the presence of the 1/1 mode leads to higher plasma density and temperature parameters.展开更多
Stabilization of tearing modes and neoclassical tearing modes is of great importance for tokamak operation.Electron cyclotron waves(ECWs)have been extensively used to stabilize the tearing modes with the virtue of hig...Stabilization of tearing modes and neoclassical tearing modes is of great importance for tokamak operation.Electron cyclotron waves(ECWs)have been extensively used to stabilize the tearing modes with the virtue of highly localized power deposition.Complete suppression of the m/n=2/1 tearing mode(TM)by electron cyclotron resonance heating(ECRH)has been achieved successfully on the J-TEXT tokamak.The effects of ECW deposition location and power amplitude on the 2/1 TM suppression have been investigated.It is found that the suppression is more effective when the ECW power is deposited closer to the rational surface.As the ECW power increases to approximately 230 k W,the 2/1 TM can be completely suppressed.The island rotation frequency is increased when the island width is reduced.The experimental results show that the local heating inside the magnetic island and the resulting temperature perturbation increase at the O-point of the island play dominant roles in TM suppression.As the ECW power increases,the 2/1 island is suppressed to smaller island width,and the flow shear also plays a stabilizing effect on small magnetic islands.With the stabilizing contribution of heating and flow shear,the 2/1 TM can be completely suppressed.展开更多
Three-dimensional(3D) equilibrium calculations, including the plasma rotation shielding effect to resonant magnetic perturbations(RMPs) produced by the island divertor(ID) coils, were carried out using the HINT and MA...Three-dimensional(3D) equilibrium calculations, including the plasma rotation shielding effect to resonant magnetic perturbations(RMPs) produced by the island divertor(ID) coils, were carried out using the HINT and MARS-F codes on J-TEXT. Validation of 3D equilibrium calculations with experimental observations demonstrates that the shielding effect will prevent the penetration of the edge m/n = 3/1 mode component when the ID coil current is 4 k A, while change the size of magnetic islands once the current exceeds the penetration threshold. This indicates that equilibrium calculations including the plasma rotation shielding effect to RMPs can lead to better agreements with experimental observations compared to the vacuum approximation method. Additionally, the magnetic topology at the boundary undergoes changes,impacting the interaction between the plasma and the target plate. These results may be important in understanding RMP effects on edge transport and magnetohydrodynamic(MHD)instability control, as well as divertor heat and particle flux distribution control.展开更多
Following the reconstruction of the TEXT tokamak at Huazhong University of Science and Technology in China, renamed as J-TEXT, a plethora of experimental and theoretical investigations has been conducted to elucidate ...Following the reconstruction of the TEXT tokamak at Huazhong University of Science and Technology in China, renamed as J-TEXT, a plethora of experimental and theoretical investigations has been conducted to elucidate the intricacies of turbulent transport within the tokamak configuration. These endeavors encompass not only the J-TEXT device's experimental advancements but also delve into critical issues pertinent to the optimization of future fusion devices and reactors. The research includes topics on the suppression of turbulence, flow drive and damping, density limit, non-local transport, intrinsic toroidal flow, turbulence and flow with magnetic islands, turbulent transport in the stochastic layer, and turbulence and zonal flow with energetic particles or helium ash. Several important achievements have been made in the last few years, which will be further elaborated upon in this comprehensive review.展开更多
Precise transverse emittance assessment in electron beams is crucial for advancing high-brightness beam injectors.As opposed to intricate methodologies that use specialized devices,quadrupole focusing strength scannin...Precise transverse emittance assessment in electron beams is crucial for advancing high-brightness beam injectors.As opposed to intricate methodologies that use specialized devices,quadrupole focusing strength scanning(Q-scanning)techniques offer notable advantages for various injectors owing to their inherent convenience and cost-effectiveness.However,their stringent approximation conditions lead to inevitable errors in practical operation,thereby limiting their widespread application.This study addressed these challenges by revisiting the analytical derivation procedure and investigating the effects of the underlying approximation conditions.Preliminary corrections were explored through a combination of data processing analysis and numerical simulations.Furthermore,based on theoretical derivations,virtual measurements using beam dynamics calculations were employed to evaluate the correction reliability.Subsequent experimental validations were performed at the Huazhong University of Science and Technology injector to verify the effectiveness of the proposed compensation method.Both the virtual and experimental results confirm the feasibility and reliability of the enhanced Q-scanning-based diagnosis for transverse emittance in typical beam injectors operating under common conditions.Through the integration of these corrections and compensations,enhanced Q-scanning-based techniques emerge as promising alternatives to traditional emittance diagnosis methods.展开更多
A thermionic gun is endowed with a long bunch tail,which presents challenges for the compact terahertz free electron laser(FEL)facility at the Huazhong University of Science and Technology.Owing to a large energy spre...A thermionic gun is endowed with a long bunch tail,which presents challenges for the compact terahertz free electron laser(FEL)facility at the Huazhong University of Science and Technology.Owing to a large energy spread,the tail particles do not contribute to the radiation.In the original design,an x-direction slit is used in the dispersive section of the transport line to remove the tail particles.This paper presents an improved scheme to remove the tail by introducing an RF beam chopper system at the exit of the electron gun,to prevent a significant number of tail particles from entering the linac.The facility remains compact while effectively removing the tail of the bunch.The parameters of the beam chopper system are designed.Bunch parameters and radiation performance are analyzed via a start-to-end simulation.The findings indicate that 43%of the particles can pass through the beam chopper system for subsequent acceleration and transport,which saves the RF power,reduces beam loss in the linac,reduces background noise,and suppresses the sideband instability.Simultaneously,the beam chopper system causes an increase in beam emittance,energy spread,and an offset in the center of the bunch.These effects can be mitigated by a solenoid,linac,and steering coils.The simulation results for the FEL show that the micro-pulse energy is greater than 1.1μJ in the frequency range of 2.8-9.7 THz,and the maximum micro-pulse energy is 1.28μJ.展开更多
基金supported by the National Natural Science Foundation of China(Nos.12341501 and 12575164)。
文摘X-rays are widely used in the non-destructive testing(NDT)of electrical equipment.Radio frequency(RF)electron linear accelerators can generate MeV high-energy X-rays with strong penetrating ability;however,the system generally has a large scale,which is not suitable for on-site testing.Compared with the S-band(S-linac)at the same stage of beam energy,the accelerator working in the X-band(X-linac)can compress the facility scale by over 2/3 in the longitudinal direction,which is convenient for the on-site NDT of electrical equipment.To address the beam quality and design complexity simultaneously,the non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ),which is a multi-objective genetic algorithm(MOGA),was developed to optimize the cavity chain design of the X-linac.Additionally,the designs of the focusing coils,electron gun,and RF couplers,which are other key components of the X-linac,were introduced in this context.In particular,the focusing coil distributions were optimized using a genetic algorithm.Furthermore,after designing such key components,PARMELA software was adopted to perform beam dynamics calculations with the optimized accelerating fields and magnetic fields.The results show that the beam performance was obtained with a capture ratio of more than 90%,an energy spread of less than 10%,and an average energy of approximately 3 MeV.The design and simulation results indicate that the proposed NSGAⅡ-based approach is feasible for X-linac accelerator design.Furthermore,it can be generalized as a universal technique for industrial electron linear accelerators provided that specific optimization objectives and constraints are set according to different application scenarios and requirements.
基金supported by the Hundred-person Program of Chinese Academy of Sciences and the National Natural Science Foundation of China(No.11905074).
文摘Electron beam injectors are pivotal components of large-scale scientific instruments,such as synchrotron radiation sources,free-electron lasers,and electron-positron colliders.The quality of the electron beam produced by the injector critically influences the performance of the entire accelerator-based scientific research apparatus.The injectors of such facilities usually use photocathode and thermionic-cathode electron guns.Although the photocathode injector can produce electron beams of excellent quality,its associated laser system is massive and intricate.The thermionic-cathode electron gun,especially the gridded electron gun injector,has a simple structure capable of generating numerous electron beams.However,its emittance is typically high.In this study,methods to reduce beam emittance are explored through a comprehensive analysis of various grid structures and preliminary design results,examining the evolution of beam phase space at different grid positions.An optimization method for reducing the emittance of a gridded thermionic-cathode electron gun is proposed through theoretical derivation,electromagnetic-field simulation,and beam-dynamics simulation.A 50%reduction in emittance was achieved for a 50 keV,1.7 A electron gun,laying the foundation for the subsequent design of a high-current,low-emittance injector.
基金supported by the National Key Research and Development Program of China(2021YFB2500200)the National Natural Science Foundation of China(52177214,52222703)for supporting our workJiangsu Funding Program for Excellent Postdoctoral Talent for the support。
文摘Solid-state electrolytes with high oxidation stability are crucial for achieving high power density allsolid-state lithium batteries.Halide electrolytes are promising candidates due to their outstanding compatibility with cathode materials and high Li^(+)conductivity.However,the electrochemical stability of chloride electrolytes is still limited,leaving them unsuitable for ultrahigh voltage operation.Besides,chemical compatibility issue between sulfide and halide electrolytes affects the electrochemical performance of all-solid-state batteries.Herein,Li-ion conductor Li_(3+x)InCl_(6-x)O_(x) is designed to address these challenges.Li_(3.25)InCl_(5.75)O_(0.25)shows a Li-ion conductivity of 0.90 mS cm^(-1)at room temperature,a high onset oxidation voltage of 3.84 V,fewer by-products at ultrahigh operation voltage,and good chemical compatibility with Li_(5.5)PS_(4.5)Cl_(1.5).The Li_(3.25)InCl_(5.75)O_(0.25)@LiNi_(0.7)Co_(0.1)Mn_(0.2)O_(2)-Li_(3.25)InCl_(5.75)O_(0.25)-VGCF/Li_(3.25)InCl_(5.75)O_(0.25)/Li_(5.5)PS_(4.5)Cl_(1.5)/Li-In battery delivers good electrochemical performances at high operating voltage.This work provides a simple,economical,and effective strategy for designing high-voltage all-solid-state electrolytes.
基金supported by National Natural Science Foundation of China (NSFC) (Nos.62201217 and 51821005)。
文摘The field-reversed configuration(FRC)plasma thruster driven by rotating magnetic field(RMF),abbreviated as the RMF-FRC thruster,is a new type of electric propulsion technology that is expected to accelerate the deep space exploration.An experimental prototype,including diagnostic devices,was designed and constructed based on the principles of the RMF-FRC thruster,with an RMF frequency of 210 kHz and a maximum peak current of 2 kA.Under the rated operating conditions,the initial plasma density was measured to be 5×10^(17)m^(-3),and increased to 2.2×10^(19)m^(-3)after the action of RMF.The coupling efficiency of RMF was about 53%,and the plasma current reached 1.9 kA.The axial magnetic field changed in reverse by 155 Gauss,successfully reversing the bias magnetic field of 60 Gauss,which verifies the formation of FRC plasma.After optimization research,it was found that when the bias magnetic field is 100 Gauss,the axial magnetic field reverse variation caused by FRC is the highest at 164 Gauss.The experimental results are discussed and strategies are proposed to improve the performance of the prototype.
基金supported by the National Natural Science Foundation of China(51977097).
文摘Currently,although some progress has been made in infancy-stage rocking-chair aqueous zinc-ion batteries(AZIBs),more discussions have focused only on the different electrochemical performances displayed by different material types rather than the intrinsic ion transport migration electrochemistry.Herein,we for the first time delve into the mechanism of tailoring the solvation sheath and desolvation processes at the electrode/electrolyte interfaces to enhance the structural stabilities in the deep discharge states.In this work,the TiO_(2)front interfaces are induced on electrochemically active but unstable TiSe_(2)host materials to construct unique TiO_(2)/TiSe_(2)-C heterointerfaces.According to X-ray absorption near edge structure(XANES),differential electrochemical mass spectrometry(DEMS),and electrochemical quartz crystal microbalance(EQCM),the intercalated species are transformed from[Zn(H_(2)O)_(6)]^(2+)to[Zn(H_(2)O)_(2)]^(2+)due to the built-in electric fields(BEFs)effects,further accelerating the ion transfer kinetics.Furthermore,owing to the absence of high-energy desolvation solvents released from desolvation processes,hydrogen evolution reaction(HER)energy barriers,Ti-Se bond strength,and structural stabilities are significantly improved,and the initial CE and HER overpotentials of the TiO_(2)/TiSe_(2)-C heterointerfaces increased from 13.76%to 84.7%,and from 1.04 to 1.30 V,respectively,and the H2 precipitation current density even at-1.3 V decreased by 73.2%.This work provides valuable insights into the complex interface electrochemical mechanism of tailoring the solvation sheath and desolvation processes toward rocking-chair zinc-ion batteries.
基金financially supported by the National Natural Science Foundation of China(51977097).
文摘Solvated zinc ions are prone to undergo desolvation at the electrode/electrolyte interfaces,and unstable H_(2)O molecules within the solvated sheaths tend to trigger hydrogen evolution reaction(HER),further accelerating interfaces decay.Herein,we propose for the first time a novel strategy to enhance the interfacial stabilities by insitu dynamic reconstruction of weakly solvated Zn2þduring the desolvation processes at heterointerfaces.Theoretical calculations indicate that,due to built-in electric field effects(BEFs),the plating/stripping mechanism shifts from[Zn(H_(2)O)_(6)]_(2)þto[Zn(H_(2)O)_(5)(SO_(4))^(2-)]_(2)þwithout additional electrolyte additives,reducing the solvation ability of H_(2)O,enhancing the competitive coordination of SO_(4)^(2-),essentially eliminating the undesirable side effects of anodes.Hence,symmetric cells can operate stably for 3000 h(51.7-times increase in cycle life),and the full cells can operate stably for 5000 cycles(51.5-times increase in cycle life).This study provides valuable insights into the critical design of weakly solvated Zn^(2+) þand desolvation processes at heterointerfaces.
基金supported in part by the National Natural Science Fundation of China(52225704 and 52107096).
文摘The dynamics of network power response play a crucial role in system stability.However,the integration of power electronic equipment leads to amplitude and angular frequency(abbreviated as"frequency")time-varying characteristics of the node voltage during dynamic processes.As a result,traditional calcu-lation methods for and characteristics of the power response of the network based on phasor and impe-dance lose their validity.Therefore,this paper undertakes mathematical calculations to reveal the power response of a network under excitation by voltage with time-varying amplitude and frequency(TVAF),relying on the original mathematical relationships and superimposed step response.Then,the multi-timescale characteristics of both the active and reactive power of the network are explored physically.Additionally,this paper reveals a new phenomenon of storing and releasing the active and reactive power of the network.To meet practical engineering requirements,a simplified power expression is presented.Finally,the theoretical analysis is validated through time-domain simulations.
基金supported by the Science and Technology Project of State Grid Corporation of China(5419-202199552A-0-5-ZN).
文摘Explorations into new electrolytes have highlighted the critical impact of solvation structure on battery performance,Classical molecular dynamics(CMD)using semi-empirical force fields has become an essential tool for simulating solvation structures.However,mainstream force fields often lack accuracy in describing strong ion-solvent interactions,causing disparities between CMD simulations and experimental observations.Although some empirical methods have been employed in some of the studies to address this issue,their effectiveness has been limited.Our CMD research,supported by quantum chemical calculations and experimental data,reveals that the solvation structure is influenced not only by the charge model but also by the polarization description.Previous empirical approaches that focused solely on adjusting ion-solvent interaction strengths overlooked the importance of polarization effects.Building on this insight,we propose integrating the Drude polarization model into mainstream force fields and verify its feasibility in carbonate,ether,and nitrile electrolytes.Our experimental results demonstrate that this approach significantly enhances the accuracy of CMD-simulated solvation structures.This work is expected to provide a more reliable CMD method for electrolyte design,shielding researchers from the pitfalls of erroneous simulation outcomes.
基金supported by the National Magnetic Confinement Fusion Energy R&D Program of China (Nos.2018YFE0309103 and 2019YFE03010004)National Natural Science Foundation of China (Nos.12475222,12205122,and 51821005)Hubei International Science and Technology Cooperation Projects (No.2022EHB003)。
文摘A large number of runaway electrons(REs)generated during disruption can cause significant damage to next-generation large-scale tokamaks.The influence of three-dimensional(3D)helical magnetic perturbations on the suppression of RE generation was explored using a set of 3D helical coils in J-TEXT tokamak,which can excite m/n=-2/2 helical magnetic perturbations.Experimental evidence shows that the-2/2 magnetic perturbations caused by the opposite coil current direct plasma toward the high-field side,simultaneously enhancing the magnetic fluctuations,which would enhance the radial loss of REs and even prevent RE generation.On the other hand,-2/2 magnetic perturbations can also reduce the cooling time during the disruption phase and generate a population of high-energy REs,which can interact with high-frequency magnetic fluctuations and in turn suppress RE generation.The critical helical coil current was found to correlate with electron density,requiring higher coil currents at higher densities.According to the statistical analysis of RE generation at different electron densities,the applied-2/2 magnetic perturbations can increase the magnetic fluctuations to the same level at lower electron densities,which can decrease the threshold electron density for RE suppression.This will be beneficial for RE mitigation in future large tokamak devices.
文摘As the core component of energy conversion for large wind turbines,the output performance of doubly-fed induction generators (DFIGs) plays a decisive role in the power quality of wind turbines.To realize the fast and accurate design optimization of DFIGs,this paper proposes a novel hybriddriven surrogate-assisted optimization method.It firstly establishes an accurate subdomain model of DFIGs to analytically predict performance indexes.Furthermore,taking the inexpensive analytical dataset produced by the subdomain model as the source domain and the expensive finite element analysis dataset as the target domain,a high-precision surrogate model is trained in a transfer learning way and used for the subsequent multi-objective optimization process.Based on this model,taking the total harmonic distortion of electromotive force,cogging torque,and iron loss as objectives,and the slot and inner/outer diameters as parameters for optimizing the topology,achieve a rapid and accurate electromagnetic design for DFIGs.Finally,experiments are carried out on a 3MW DFIG to validate the effectiveness of the proposed method.
基金supported by the National Natural Science Foundation of China(No.11975107,12205111)。
文摘The application of superconducting(SC)technology enables magnets to excite strong fields with small footprints,which has great potential for miniaturizing proton therapy gantries.However,the slow ramping rate of SC magnets results in a low treatment efficiency compared with normal-conducting(NC)gantries.To address this problem,this study proposes a compact proton therapy gantry design with a large momentum acceptance utilizing alternating-gradient canted-cosine-theta(AG-CCT)SC magnets.In our design,a high-transmission degrader is mounted in the middle of the gantry,and the upstream beamline employs NC magnets with small apertures.Downstream of the degrader,large-bore AG-CCT magnets with strong alternating focusing gradients are set symmetrically as a local achromat,which realizes a momentum acceptance of 20%(or 40%in the energy domain).Therefore,only three magnetic working points are required to cover a treatment energy of 70-230 Me V.Owing to the large momentum acceptance,the proton beam after the degrader can be directly delivered to the isocenter without truncating its energy spectrum,which can significantly increase the treatment efficiency but causes severe dispersion effects during pencil beam scanning.Therefore,a compensation method was introduced by tuning the normal and skewed quadrupoles during the scanning process.As a result,the new gantry not only presents a remarkable reduction in the size and weight of the facility but also shows good potential for fast treatment.
基金supported by National Natural Science Foundation of China(Nos.2017YFE0301804,2017YFE0301803)Technology Innovation Platform Project of Wuhan(No.20200766)。
文摘An advanced spectral diagnostic system was developed to measure the electron temperature(T_(e)),electron density(N_(e)),and ion temperature(T_(i))of the Huazhong University of Science and Technology field-reversed configuration plasma.The system consists of an optic fiber spectrometer with a wide spectral band and a 670 mm focal length high throughout Czerny-Turner monochromator equipped with both a 3600 g mm^(-1)grating and a 2400 g mm^(-1)grating to measure the line spectrum.Accompanying these components is an electronmultiplying charge-coupled device camera to capture spectral data.The relative intensity of the optical fiber spectrometer was calibrated using a standard luminance source,and the wavelength calibration of the spectrometer was accomplished using a Hg/Ar lamp.This diagnostic setup was configured to measure electron density based on the Stark effect of H_γ(n=5→n=2;434.04 nm).Doppler broadening of an OⅢ(2s^(2)2p(^(2)P^(0))3p→2s^(2)2p(^(2)P^(0))3s;375.988 nm)emission line was measured and analyzed to obtain the ion temperature,and electron temperatures were estimated from the relative strength of H_(β)(n=4→n=2;486.14 nm)(D_(β))and H_(γ)(D_(γ))spectral lines when the electron density was obtained from Stark effect measurements.The initial experimental results indicate that the highest electron temperature of the formation region was approximately 8 eV,the electron density of the colliding-and-merging region was approaching 10^(20)m^(-3),and the ion temperature reached about 40 eV.
基金financial support from the Interdisciplinary Fund of the Wuhan National High Magnetic Field Center (No. WHMFC202101)。
文摘The discharge morphology of pulsed dielectric barrier discharge(PDBD) plays important roles in its applications. Here, we systematically investigated the effects of the voltage amplitude,discharge gap, and O_(2)content on the PDBD morphology, and revealed the possible underlying mechanism of the U-shaped formation. First, the morphological evolution under different conditions was recorded. A unique U-shaped region appears in the middle edge region when the gap is larger than 2 mm, while the entire discharge region remains columnar under a 2 mm gap in He PDBD. The width of the discharge and the U-shaped region increase with the increase in voltage, and decrease with the increase of the gap and O_(2)content. To explain this phenomenon,a two-dimensional symmetric model was developed to simulate the spatiotemporal evolution of different species and calculate the electric thrust. The discharge morphology evolution directly corresponds to the excited-state atomic reduction process. The electric thrust on the charged particles mainly determines the reaction region and strongly influences the U-shaped formation.When the gap is less than 2 mm, the electric thrust is homogeneous throughout the entire region,resulting in a columnar shape. However, when the gap is larger than 2 mm or O_(2)is added, the electric thrust in the edge region becomes greater than that in the middle, leading to the U-shaped formation. Furthermore, in He PDBD, the charged particles generating electric thrust are mainly electrons and helium ions, while in He/O_(2)PDBD those that generate electric thrust at the outer edge of the electrode surface are mainly various oxygen-containing ions.
基金supported by the National Magnetic Confinement Fusion Energy R&D Program of China(No.2018YFE0309103)National Natural Science Foundation of China(Nos.12305243 and 51821005)。
文摘On J-TEXT,the temporal evolution of heat flux distribution on the high-field side(HFS)divertor plate has been measured by an infrared(IR)camera during the plasma operation with an island divertor configuration.In experiments,the island divertor configuration is an edge magnetic island chain structure surrounded by stochastic layers,which can be induced by resonant magnetic perturbations(RMPs).The experimental results show that the heat flux distribution on the HFS target plate depends significantly on the edge magnetic topology.Furthermore,the impact of hydrogen fueling using supersonic molecular beam injection(SMBI)on the divertor heat flux distributions is studied on J-TEXT with an island divertor configuration.It has been observed that power detachment can be achieved when the radiation front approaches the last closed flux surface(LCFS)after each SMBI pulse.This result may provide a method of access for divertor detachment on a fusion device with a three-dimensional(3D)boundary magnetic structure.
基金supported by National Natural Science Foundation of China(Nos.12175227 and 51821005)the Fundamental Research Funds for the Central Universities(No.USTC 20210079)the Collaborative Innovation Program of Hefei Science Center,CAS(No.2022HSC-CIP022)。
文摘Density limit has long been a widely studied issue influencing the operating range of tokamaks.The rapid growth of the m/n=2/1(where m and n are poloidal and toroidal mode numbers,respectively)tearing mode is generally regarded as a primary precursor to the density limit disruption.In this experiment,the coupling of the m/n=1/1 mode and the m/n=2/1 mode in highdensity plasma was observed.During a sawtooth cycle,the frequencies of the two modes gradually converge until they become equal.After that,toroidal coupling occurs between the 1/1 and 2/1 modes,resulting in a mutually fixed phase relationship.With the occurrence of toroidal coupling,the 2/1 mode is stabilized.Prior to the disruption,the cessation of the 1/1 and 2/1 mode coupling,along with the rapid growth in the amplitude of the 2/1 mode,can be observed.Additionally,under the same parameters,comparing discharges with or without the 1/1 mode,it is found that the presence of the 1/1 mode leads to higher plasma density and temperature parameters.
基金supported by the National Magnetic Confinement Fusion Energy R&D Program of China(No.2019YFE03010004)the Hubei Provincial Natural Science Foundation of China(No.2022CFA072)National Natural Science Foundation of China(No.51821005)。
文摘Stabilization of tearing modes and neoclassical tearing modes is of great importance for tokamak operation.Electron cyclotron waves(ECWs)have been extensively used to stabilize the tearing modes with the virtue of highly localized power deposition.Complete suppression of the m/n=2/1 tearing mode(TM)by electron cyclotron resonance heating(ECRH)has been achieved successfully on the J-TEXT tokamak.The effects of ECW deposition location and power amplitude on the 2/1 TM suppression have been investigated.It is found that the suppression is more effective when the ECW power is deposited closer to the rational surface.As the ECW power increases to approximately 230 k W,the 2/1 TM can be completely suppressed.The island rotation frequency is increased when the island width is reduced.The experimental results show that the local heating inside the magnetic island and the resulting temperature perturbation increase at the O-point of the island play dominant roles in TM suppression.As the ECW power increases,the 2/1 island is suppressed to smaller island width,and the flow shear also plays a stabilizing effect on small magnetic islands.With the stabilizing contribution of heating and flow shear,the 2/1 TM can be completely suppressed.
基金supported by the National Magnetic Confinement Fusion Energy R & D Program of China (No. 2018 YFE0309101)National Natural Science Foundation of China (Nos. 12305243 and 51821005)。
文摘Three-dimensional(3D) equilibrium calculations, including the plasma rotation shielding effect to resonant magnetic perturbations(RMPs) produced by the island divertor(ID) coils, were carried out using the HINT and MARS-F codes on J-TEXT. Validation of 3D equilibrium calculations with experimental observations demonstrates that the shielding effect will prevent the penetration of the edge m/n = 3/1 mode component when the ID coil current is 4 k A, while change the size of magnetic islands once the current exceeds the penetration threshold. This indicates that equilibrium calculations including the plasma rotation shielding effect to RMPs can lead to better agreements with experimental observations compared to the vacuum approximation method. Additionally, the magnetic topology at the boundary undergoes changes,impacting the interaction between the plasma and the target plate. These results may be important in understanding RMP effects on edge transport and magnetohydrodynamic(MHD)instability control, as well as divertor heat and particle flux distribution control.
基金supported by the National Key R&D Program of China (Nos. 2022YFE03100004, 2017YFE0302000, and 2017YFE0301100)National Natural Science Foundation of China (Nos. 12275097, 12275096, 11875292, 11675059, 11905079, 11305071, and 51821005)+5 种基金the Ministry of Science and Technology of China (No. 2013GB112002)the Project of Science and Technology Department of Sichuan Province (No. 2022NSFSC1791)the Natural Science Foundation of Anhui Province (No. 2208085J39)the Fundamental Research Funds for the Central Universities, HUST: (Nos. 2019kfy XMBZ034 and 2021XXJS007)the Initiative Postdocs Supporting Program of China (No. BX20180105)the US Department of Energy, Office of Science, Office of Fusion Energy Sciences (Nos. DEFG02-04ER54738 and DE-SC-0020287)。
文摘Following the reconstruction of the TEXT tokamak at Huazhong University of Science and Technology in China, renamed as J-TEXT, a plethora of experimental and theoretical investigations has been conducted to elucidate the intricacies of turbulent transport within the tokamak configuration. These endeavors encompass not only the J-TEXT device's experimental advancements but also delve into critical issues pertinent to the optimization of future fusion devices and reactors. The research includes topics on the suppression of turbulence, flow drive and damping, density limit, non-local transport, intrinsic toroidal flow, turbulence and flow with magnetic islands, turbulent transport in the stochastic layer, and turbulence and zonal flow with energetic particles or helium ash. Several important achievements have been made in the last few years, which will be further elaborated upon in this comprehensive review.
基金supported by the National Natural Science Foundation of China(Nos.12341501 and 11905074)。
文摘Precise transverse emittance assessment in electron beams is crucial for advancing high-brightness beam injectors.As opposed to intricate methodologies that use specialized devices,quadrupole focusing strength scanning(Q-scanning)techniques offer notable advantages for various injectors owing to their inherent convenience and cost-effectiveness.However,their stringent approximation conditions lead to inevitable errors in practical operation,thereby limiting their widespread application.This study addressed these challenges by revisiting the analytical derivation procedure and investigating the effects of the underlying approximation conditions.Preliminary corrections were explored through a combination of data processing analysis and numerical simulations.Furthermore,based on theoretical derivations,virtual measurements using beam dynamics calculations were employed to evaluate the correction reliability.Subsequent experimental validations were performed at the Huazhong University of Science and Technology injector to verify the effectiveness of the proposed compensation method.Both the virtual and experimental results confirm the feasibility and reliability of the enhanced Q-scanning-based diagnosis for transverse emittance in typical beam injectors operating under common conditions.Through the integration of these corrections and compensations,enhanced Q-scanning-based techniques emerge as promising alternatives to traditional emittance diagnosis methods.
基金supported by the National Natural Science Foundation of China(No.12175077).
文摘A thermionic gun is endowed with a long bunch tail,which presents challenges for the compact terahertz free electron laser(FEL)facility at the Huazhong University of Science and Technology.Owing to a large energy spread,the tail particles do not contribute to the radiation.In the original design,an x-direction slit is used in the dispersive section of the transport line to remove the tail particles.This paper presents an improved scheme to remove the tail by introducing an RF beam chopper system at the exit of the electron gun,to prevent a significant number of tail particles from entering the linac.The facility remains compact while effectively removing the tail of the bunch.The parameters of the beam chopper system are designed.Bunch parameters and radiation performance are analyzed via a start-to-end simulation.The findings indicate that 43%of the particles can pass through the beam chopper system for subsequent acceleration and transport,which saves the RF power,reduces beam loss in the linac,reduces background noise,and suppresses the sideband instability.Simultaneously,the beam chopper system causes an increase in beam emittance,energy spread,and an offset in the center of the bunch.These effects can be mitigated by a solenoid,linac,and steering coils.The simulation results for the FEL show that the micro-pulse energy is greater than 1.1μJ in the frequency range of 2.8-9.7 THz,and the maximum micro-pulse energy is 1.28μJ.
