The 1Cr18Ni9Ti specimens were treated respectively with pulse current under 520 V and 2 600 V during solidification and the solidification structure was observed. The results showed that pulse current can refine solid...The 1Cr18Ni9Ti specimens were treated respectively with pulse current under 520 V and 2 600 V during solidification and the solidification structure was observed. The results showed that pulse current can refine solidification grains, cut primary dentrities remarkably and reduce second dentritic arm spacing. The mechanism and effect are changed with operation parameters.展开更多
According to the principle of damage mechanics, the damage characteristics of ferrite nodular cast iron under uniaxial stress were studied by measuring electric resistance. The results show that the damage in nodular ...According to the principle of damage mechanics, the damage characteristics of ferrite nodular cast iron under uniaxial stress were studied by measuring electric resistance. The results show that the damage in nodular cast iron occurs when the applied stress is more than a certain extent, and the damage variable increases with stress. The evolutional law of damage variable as a function of stress was obtained. The damage threshold of nodular cast iron increases with nodularity, but it is below the yield strength, which provides reference significance to the design of machinery structure and the choice of materials. The critical damage variable is not related to the nodularity, which is about 0 060-0 068.展开更多
By introducing aparameter of difference in ferrite formation temperature between binary Fe-C and multicomponent system,and referring to the thermodynamic model for Fe-C binary system,a simplified thermodynamic model f...By introducing aparameter of difference in ferrite formation temperature between binary Fe-C and multicomponent system,and referring to the thermodynamic model for Fe-C binary system,a simplified thermodynamic model for pro-eutectoid ferrite formation in Fe-ΣXiC multicomponent structural steels(Xi=Mn,Si,Mo,Cr,Ni or Ti,etc)was suggested.The comparison of the calculated Ae3 temperatures with the measured data of steels 42 shows that the relative standard deviation and root-mean-square(RMS)error between them are only 0.71% and 8.92 K,respectively.However,the deviations between the same measured data and the values calculated from the superelement model are as high as 1.86% and 23.83 K,respectively.It can be concluded that the simplified thermodynamic model for pro-eutectoid ferrite formation in multicomponent structural steels is acceptable and the calculated Ae3 temperatures are in good agreement with the experimental data.展开更多
By combining the α/γ interface migration and the carbon diffusion at the interface in Fe-C alloys, a mathematical model is constructed to describe the mixed-control mechanism for proeutectoid ferrite formation from ...By combining the α/γ interface migration and the carbon diffusion at the interface in Fe-C alloys, a mathematical model is constructed to describe the mixed-control mechanism for proeutectoid ferrite formation from austenite. In this model, the α/γ interface is treated as non-equilibrium interface, i.e., the carbon concentration of austenite at γ/α interface is obtained through theoretical calculation, instead of that assumed as the local equilibrium concentration. For isothermal precipitation of ferrite in Fe-C alloys, the calculated results show that the rate of interface migration decreases monotonically during the whole process, while the rate of carbon diffusion from γ/α interface into austenite increases to a peak value and then decreases. The process of ferrite growth may be considered as composed of three stages: the period of rapid growth, slow growth and finishing stage. The results also show that the carbon concentration of austenite at γ/α interface could not reach the thermodynamic equilibrium value even at the last stage of ferrite growth.展开更多
A new on line titration method and device based on a new technique continuous flow titration is described. By the means of electronically controlled switching of a solenoid valve, the main component of the system, t...A new on line titration method and device based on a new technique continuous flow titration is described. By the means of electronically controlled switching of a solenoid valve, the main component of the system, the equivalent point of the titration is easily determined. Several kinds of mixing tools were examined, whereby a self made mixing chamber with minimum volume gave best results and was therefore used in the device. The error of the titration is within 0.2% and the relative standard deviation (RSD) is below 1.2%. The results show no difference compared with a commercial device, meanwhile the new on line titration system is cheaper and fully automated and thus easy to hand and less solvent consumption.展开更多
The averaging analysis was carried out to study the motion of a quasi axisymmetrical gyrostat under a small magnitude self excited control torque. The common approach to investigating the problem of rigid body rot...The averaging analysis was carried out to study the motion of a quasi axisymmetrical gyrostat under a small magnitude self excited control torque. The common approach to investigating the problem of rigid body rotation under the action of a small torque known in the body frame was described. Using this approach, the problem (Grammel's problem for the case of small torque) that is maintaining the angular velocity of a quasi axisymmetrical gyrostat using a control torque quadratic in the angular velocity was solved.展开更多
This paper introduces the hydrodynamics theory related to water wave pump. Water wave pump is a new type pump, which uses the particular quality of water wave and re-divides the inflow energy to increase the pressure ...This paper introduces the hydrodynamics theory related to water wave pump. Water wave pump is a new type pump, which uses the particular quality of water wave and re-divides the inflow energy to increase the pressure of one part of the inflow water with the rest water flowing away freely. The research and development of such a pump is of importance and significant value and profitable social interest in that it can fully utilize the residual energy of natural source in industrial and civil water circle systems. Through hydrodynamics research and calculation, a series of valid design parameters were obtained and the predicted results achieved.展开更多
基金Sponsored by National Natural Science Foundation of China(50075053)
文摘The 1Cr18Ni9Ti specimens were treated respectively with pulse current under 520 V and 2 600 V during solidification and the solidification structure was observed. The results showed that pulse current can refine solidification grains, cut primary dentrities remarkably and reduce second dentritic arm spacing. The mechanism and effect are changed with operation parameters.
基金Item Sponsored by Scientific and Technological Brainstorm Project for Ninth Five-Year Plan of China(97-225-02-02-11)
文摘According to the principle of damage mechanics, the damage characteristics of ferrite nodular cast iron under uniaxial stress were studied by measuring electric resistance. The results show that the damage in nodular cast iron occurs when the applied stress is more than a certain extent, and the damage variable increases with stress. The evolutional law of damage variable as a function of stress was obtained. The damage threshold of nodular cast iron increases with nodularity, but it is below the yield strength, which provides reference significance to the design of machinery structure and the choice of materials. The critical damage variable is not related to the nodularity, which is about 0 060-0 068.
基金Item Sponsored by National Natural Science Foundation of China(50075053)
文摘By introducing aparameter of difference in ferrite formation temperature between binary Fe-C and multicomponent system,and referring to the thermodynamic model for Fe-C binary system,a simplified thermodynamic model for pro-eutectoid ferrite formation in Fe-ΣXiC multicomponent structural steels(Xi=Mn,Si,Mo,Cr,Ni or Ti,etc)was suggested.The comparison of the calculated Ae3 temperatures with the measured data of steels 42 shows that the relative standard deviation and root-mean-square(RMS)error between them are only 0.71% and 8.92 K,respectively.However,the deviations between the same measured data and the values calculated from the superelement model are as high as 1.86% and 23.83 K,respectively.It can be concluded that the simplified thermodynamic model for pro-eutectoid ferrite formation in multicomponent structural steels is acceptable and the calculated Ae3 temperatures are in good agreement with the experimental data.
基金This work was supported by the National Natural Science Foundation of China under grant No.50075053the Emphasized Item of Development Funds of Science and Technology of Shanghai City,China(No.03H201).
文摘By combining the α/γ interface migration and the carbon diffusion at the interface in Fe-C alloys, a mathematical model is constructed to describe the mixed-control mechanism for proeutectoid ferrite formation from austenite. In this model, the α/γ interface is treated as non-equilibrium interface, i.e., the carbon concentration of austenite at γ/α interface is obtained through theoretical calculation, instead of that assumed as the local equilibrium concentration. For isothermal precipitation of ferrite in Fe-C alloys, the calculated results show that the rate of interface migration decreases monotonically during the whole process, while the rate of carbon diffusion from γ/α interface into austenite increases to a peak value and then decreases. The process of ferrite growth may be considered as composed of three stages: the period of rapid growth, slow growth and finishing stage. The results also show that the carbon concentration of austenite at γ/α interface could not reach the thermodynamic equilibrium value even at the last stage of ferrite growth.
文摘A new on line titration method and device based on a new technique continuous flow titration is described. By the means of electronically controlled switching of a solenoid valve, the main component of the system, the equivalent point of the titration is easily determined. Several kinds of mixing tools were examined, whereby a self made mixing chamber with minimum volume gave best results and was therefore used in the device. The error of the titration is within 0.2% and the relative standard deviation (RSD) is below 1.2%. The results show no difference compared with a commercial device, meanwhile the new on line titration system is cheaper and fully automated and thus easy to hand and less solvent consumption.
文摘The averaging analysis was carried out to study the motion of a quasi axisymmetrical gyrostat under a small magnitude self excited control torque. The common approach to investigating the problem of rigid body rotation under the action of a small torque known in the body frame was described. Using this approach, the problem (Grammel's problem for the case of small torque) that is maintaining the angular velocity of a quasi axisymmetrical gyrostat using a control torque quadratic in the angular velocity was solved.
基金the Shanghai Science and Technology Development Fund Subsidizes(Grant No: 00ZF14023)
文摘This paper introduces the hydrodynamics theory related to water wave pump. Water wave pump is a new type pump, which uses the particular quality of water wave and re-divides the inflow energy to increase the pressure of one part of the inflow water with the rest water flowing away freely. The research and development of such a pump is of importance and significant value and profitable social interest in that it can fully utilize the residual energy of natural source in industrial and civil water circle systems. Through hydrodynamics research and calculation, a series of valid design parameters were obtained and the predicted results achieved.
