We investigate the carrier, phonon, and spin dynamics in the ferromagnetic semiconductor(In,Fe)Sb using ultrafast optical pump-probe spectroscopy. We discover two anomalies near T^(*)(~40 K) and T^(†)(~200 K) in the p...We investigate the carrier, phonon, and spin dynamics in the ferromagnetic semiconductor(In,Fe)Sb using ultrafast optical pump-probe spectroscopy. We discover two anomalies near T^(*)(~40 K) and T^(†)(~200 K) in the photoexcited carrier dynamics, which can be attributed to the electron-spin and spin-lattice scattering processes influenced by the magnetic phase transition and modifications in magnetic anisotropy. The magnetization change can be revealed by the dynamics of coherent acoustic phonon. We also observe abrupt changes in the photoinduced spin dynamics near T^(*)and T^(†), which not only illustrate the spin-related scatterings closely related to the long-range magnetic order, but also reveal the D'yakonov–Perel and Elliott–Yafet mechanisms dominating at temperatures below and above T^(†), respectively. Our findings provide important insights into the nonequilibrium properties of the photoexcited(In,Fe)Sb.展开更多
To optimize turn on velocity of the SiC LIMS,we proposed a new structure for the LIMS that incorporates an opti-mized n^(+)layer and a multi-light triggered electrode design for the anode.The chip size is 5.5 mm×...To optimize turn on velocity of the SiC LIMS,we proposed a new structure for the LIMS that incorporates an opti-mized n^(+)layer and a multi-light triggered electrode design for the anode.The chip size is 5.5 mm×5.5 mm in dimension.The experiment results indicate that the saturation laser energy required to trigger the prepared SiC LIMS has been decreased from 1.8 mJ to 40μJ,with the forward blocking voltage of the prepared SiC LIMSs capable of withstanding over 7000 V.The leakage current is about 0.3μA at room temperature,and the output current density achieves 4.25 kA/cm^(2)(with di/dt larger than 20 kA/μs).展开更多
We report the manipulation of ferromagnetism in magnetic semiconductor Ba(Zn,Mn,Cu)_(2)As_(2)through chemical pressure.The substitutions of Sr for Ba and Sb for As introduce positive and negative chemical pressures,re...We report the manipulation of ferromagnetism in magnetic semiconductor Ba(Zn,Mn,Cu)_(2)As_(2)through chemical pressure.The substitutions of Sr for Ba and Sb for As introduce positive and negative chemical pressures,respectively;neither Sr doping nor Sb doping change the tetragonal crystal structure.Based on Ba(Zn_(0.75)Mn_(0.125)Cu_(0.125))_(2)As_(2)with T_(C)~34 K,10%Sr/Ba substitutions significantly improve T_(C)by~15%to 39 K,whereas 10%Sb/As substitutions substantially reduce TCby~47%to 18 K.The AC magnetic susceptibility measurements indicate that Sr-doped and Sb-doped samples evolve into a spin glass state below the spin freezing temperature Tf.Electrical transport measurements demonstrate that Sr-doped specimens retain semiconducting behavior;additionally,they display a significant negative magnetoresistance effect under applied magnetic fields and the magnetoresistance reaches~-19%at 8 T.展开更多
Doping plays a pivotal role in enhancing the performance of organic semiconductors(OSCs)for advanced optoelectronic and thermoelectric applications.In this study,we systematically investigated the doping performance a...Doping plays a pivotal role in enhancing the performance of organic semiconductors(OSCs)for advanced optoelectronic and thermoelectric applications.In this study,we systematically investigated the doping performance and applicability of the ionic dopant 4-isopropyl-4′-methyldiphenyliodonium tetrakis(penta-fluorophenyl-borate)(DPI-TPFB)as a p-dopant for OSCs.Using the p-type OSC PBBT-2T as a model system,we demonstrated that DPI-TPFB shows significant doping effect,as confirmed by ESR spectra,ultraviolet-visible-near-infrared(UV-vis-NIR)absorption,and work function analysis,and enhances the electronic conductivity of PBBT-2T films by over four orders of magnitude.Furthermore,DPI-TPFB exhibited broad doping applicability,effectively doping various p-type OSCs and even imparting p-type characteristics to the n-type OSC N2200,transforming its intrinsic n-type behavior into p-type.The application of DPI-TPFB-doped PBBT-2T films in organic thermoelectric devices(OTEs)was also explored,achieving a power factor of approximately 10μW·m^(-1)·K^(-2).These findings highlight the potential of DPI-TPFB as a versatile and efficient dopant for integration into organic optoelectronic and thermoelectric devices.展开更多
In this paper,we theoretically study the Lamb wave in a multilayered piezoelectric semiconductor(PSC)plate,where each layer is an n-type PSC with the symmetry of transverse isotropy.Based on the extended Stroh formali...In this paper,we theoretically study the Lamb wave in a multilayered piezoelectric semiconductor(PSC)plate,where each layer is an n-type PSC with the symmetry of transverse isotropy.Based on the extended Stroh formalism and dual-variable and position(DVP)method,the general solution of the coupled fields for the Lamb wave is derived,and then the dispersion equation is obtained by the application of the boundary conditions.First,the influence of semiconducting properties on the dispersion behavior of the Lamb wave in a single-layer PSC plate is analyzed.Then,the propagation characteristics of the Lamb wave in a sandwich plate are investigated in detail.The numerical results show that the wave speed and attenuation depend on the stacking sequence,layer thickness,and initial carrier density,the Lamb wave can propagate without a cut-off frequency in both the homogeneous and multilayer PSC plates due to the semiconducting properties,and the Lamb wave without attenuation can be achieved by carefully selecting the semiconductor property in the upper and lower layers.These new features could be very helpful as theoretical guidance for the design and performance optimization of PSC devices.展开更多
A new type of 785 nm semiconductor laser device has been proposed.The thin cladding and mode expansion layer structure incorporated into the epitaxy on the p-side significantly impacts the regulation of grating etchin...A new type of 785 nm semiconductor laser device has been proposed.The thin cladding and mode expansion layer structure incorporated into the epitaxy on the p-side significantly impacts the regulation of grating etching depth.Thinning of the p-side waveguide layer makes the light field bias to the n-side cladding layer.By coordinating the confinement effect of the cladding layer,the light confinement factor on the p-side is regulated.On the other hand,the introduction of a mode expansion layer facilitates the expansion of the mode profile on the p side cladding layer.Both these factors contribute positively to reducing the grating etching depth.Compared to the reported epitaxial structures of symmetric waveguides,the new structure significantly reduces the etching depth of the grating while ensuring adequate reflection intensity and maintaining resonance.Moreover,to improve the output performance of the device,the new epitaxial structure has been optimized.Based on the traditional epitaxial structure,an energy release layer and an electron blocking layer are added to improve the electronic recombination efficiency.This improved structure has an output performance comparable to that of a symmetric waveguide,despite being able to have a smaller gain area.展开更多
Multifunctional semiconductors play an important role in developing advanced photoelectric technologies.In this work,based on an octahedral replacement strategy in chalcogenides,a new selenide semiconductor NaMn_(3)Ga...Multifunctional semiconductors play an important role in developing advanced photoelectric technologies.In this work,based on an octahedral replacement strategy in chalcogenides,a new selenide semiconductor NaMn_(3)Ga_(3)Se_(8)was rationally designed,and synthesized by the flux method.The compound crystallizes in the noncentrosymmetric(NCS)P_(6)space group,and is composed of unique prismatic[NaSe_(6)],octahedral[MnSe_(6)]and tetrahedral[GaSe_(4)]motifs,inheriting the stable three-dimensional framework built by the octahedral and tetrahedral units in the A^(Ⅰ)Mg_(3)^(Ⅱ)C_(3)^(Ⅲ)Q_(8)^(Ⅵ)family.NaMn_(3)Ga_(3)Se_(8)shows the largest known secondary nonlinear optical(NLO)response of~2.1×AgGaS_(2)(AGS)in the A^(Ⅰ)Mg_(3)^(Ⅱ)C_(3)^(Ⅲ)Q_(8)^(Ⅵ)family,and a high laser-induced damage threshold of~3.0×AGS.Meanwhile,the introduction of Mn2t with unpaired 3d electrons induces a strong red emission band(685–805 nm)under the excitation source of 496 nm,as well as a paramagnetic to antiferromagnetic(AFM)transition at 7.3 K.The results confirm that NaMn_(3)Ga_(3)Se_(8)possesses multifunctional features including significant NLO response,fluorescence emission and AFM properties,and illustrate that replacing octahedral units with approaching size and geometry(like[MgSe_(6)]and[MnSe_(6)])could be a feasible way to develop multifunctional chalcogenides.展开更多
Semiconductor photocatalysis holds great promise for renewable energy generation and environment remediation,but generally suffers from the serious drawbacks on light absorption,charge generation and transport,and str...Semiconductor photocatalysis holds great promise for renewable energy generation and environment remediation,but generally suffers from the serious drawbacks on light absorption,charge generation and transport,and structural stability that limit the performance.The core-shell semiconductorgraphene(CSSG)nanoarchitectures may address these issues due to their unique structures with exceptional physical and chemical properties.This review explores recent advances of the CSSG nanoarchitectures in the photocatalytic performance.It starts with the classification of the CSSG nanoarchitectures by the dimensionality.Then,the construction methods under internal and external driving forces were introduced and compared with each other.Afterward,the physicochemical properties and photocatalytic applications of these nanoarchitectures were discussed,with a focus on their role in photocatalysis.It ends with a summary and some perspectives on future development of the CSSG nanoarchitectures toward highly efficient photocatalysts with extensive application.By harnessing the synergistic capabilities of the CSSG architectures,we aim to address pressing environmental and energy challenges and drive scientific progress in these fields.展开更多
(Ga,Fe)Sb is a promising magnetic semiconductor(MS)for spintronic applications because its Curie temperature(T_(C))is above 300 K when the Fe concentration is higher than 20%.However,the anisotropy constant Ku of(Ga,F...(Ga,Fe)Sb is a promising magnetic semiconductor(MS)for spintronic applications because its Curie temperature(T_(C))is above 300 K when the Fe concentration is higher than 20%.However,the anisotropy constant Ku of(Ga,Fe)Sb is below 7.6×10^(3)erg/cm^(3)when Fe concentration is lower than 30%,which is one order of magnitude lower than that of(Ga,Mn)As.To address this issue,we grew Ga_(1-x-y)Fe_(x)Ni_(y)Sb films with almost the same x(≈24%)and different y to characterize their magnetic and electrical transport properties.We found that the magnetic anisotropy of Ga_(0.76-y)Fe_(0.24)Ni_(y)Sb can be enhanced by increasing y,in which Ku is negligible at y=1.7%but increases to 3.8×10^(5)erg/cm^(3)at y=6.1%(T_(C)=354 K).In addition,the hole mobility(μ)of Ga_(1-x-y)Fe_(x)Ni_(y)Sb reaches 31.3 cm^(2)/(V∙s)at x=23.7%,y=1.7%(T_(C)=319 K),which is much higher than the mobility of Ga_(1-x)Fe_(x)Sb at x=25.2%(μ=6.2 cm^(2)/(V∙s)).Our results provide useful information for enhancing the magnetic anisotropy and hole mobility of(Ga,Fe)Sb by using Ni co-doping.展开更多
Triboelectric nanogenerator(TENG)utilizing tribovoltaic effect can directly produce direct current with high energy conversion efficiency,which expands their application in semiconductor devices and self-powered syste...Triboelectric nanogenerator(TENG)utilizing tribovoltaic effect can directly produce direct current with high energy conversion efficiency,which expands their application in semiconductor devices and self-powered systems.This work compre-hensively summarizes the recent developments in semiconductor-based direct current TENGs(SDC-TENGs),which hold significant promise for DC energy harvesting technologies and semiconductor systems.First,the tribovoltaic effect is elucidated,and SDC-TENGs are categorized into six types based on different triboelectric structures:metal-semiconductor(M-S),metal-insula-tor-semiconductor(M-I-S),semiconductor-semiconductor(S-S),semiconductor-insulator-semiconductor(S-I-S),liquid-semiconductor(L-S),and metal/semiconductor-liquid-semiconductor(M/S-L-S)contact devices.Subsequent sections detail the operational mechanisms,strengths,and limitations of each category.Additionally,this paper outlines the enhancement mechanisms of SDC-TENGs providing guidance and recommendations for performance improvement.The conclusion high-lights potential application scenarios for various types of SDC-TENGs,outlining the prospective benefits and challenges.SDC-TENG technology is poised to drive revolutionary developments in semiconductor devices and self-powered systems.展开更多
The 975 nm multimode diode lasers with high-order surface Bragg diffraction gratings have been simulated and calcu-lated using the 2D finite difference time domain(FDTD)algorithm and the scattering matrix method(SMM)....The 975 nm multimode diode lasers with high-order surface Bragg diffraction gratings have been simulated and calcu-lated using the 2D finite difference time domain(FDTD)algorithm and the scattering matrix method(SMM).The periods and etch depth of the grating parameters have been optimized.A board area laser diode(BA-LD)with high-order diffraction grat-ings has been designed and fabricated.At output powers up to 10.5 W,the measured spectral width of full width at half maxi-mum(FWHM)is less than 0.5 nm.The results demonstrate that the designed high-order surface gratings can effectively nar-row the spectral width of multimode semiconductor lasers at high output power.展开更多
The thickness and composition of the external laminae contain errors,leading to inaccuracies in the theoretical calculations and simulations associated with Fig.3,Fig.4,and Fig.5.However,as these theoretical calculati...The thickness and composition of the external laminae contain errors,leading to inaccuracies in the theoretical calculations and simulations associated with Fig.3,Fig.4,and Fig.5.However,as these theoretical calculations merely illustrate a trend and do not contradict the experimental results,a request for modification has been submitted.展开更多
Internal loss is a key internal parameter for high power 1060-nm InGaAs/A1GaAs semiconductor laser. In this paper, we discuss the origin of internal loss of 1060-nm InGaAs/GaAs quantum welt （QW） AIGaAs separate conf...Internal loss is a key internal parameter for high power 1060-nm InGaAs/A1GaAs semiconductor laser. In this paper, we discuss the origin of internal loss of 1060-nm InGaAs/GaAs quantum welt （QW） AIGaAs separate confinement het- erostructure semiconductor laser, and the method to reduce internal loss. By light doping the n-cladding layer, and stepwise doping the p-cladding layer combined with the expanded waveguide layer, a broad area laser with internal loss of 1/cm is designed and fabricated. Ridge waveguide laser with an output power of 350 mW is obtained. The threshold current and slope efficiency near the threshold current are 20 mA and 0.8 W/A, respectively.展开更多
Wet thermal annealing effects on the properties of TaN/HfO2/Ge metal-oxide-semiconductor （MOS） structures with and without a GeO2 passivation layer are investigated. The physical and the electrical properties are ch...Wet thermal annealing effects on the properties of TaN/HfO2/Ge metal-oxide-semiconductor （MOS） structures with and without a GeO2 passivation layer are investigated. The physical and the electrical properties are characterized by X-ray photoemission spectroscopy, high-resolution transmission electron microscopy, capacitance-voltage （C-V） and current-voltage characteristics. It is demonstrated that wet thermal annealing at relatively higher temperature such as 550 ℃ can lead to Ge incorporation in HfO2 and the partial crystallization of HfO2, which should be responsible for the serious degradation of the electrical characteristics of the TaN/HfO2/Ge MOS capacitors. However, wet thermal annealing at 400 ℃ can decrease the GeOx interlayer thickness at the HfO2/Ge interface, resulting in a significant reduction of the interface states and a smaller effective oxide thickness, along with the introduction of a positive charge in the dielectrics due to the hydrolyzable property of GeOx in the wet ambient. The pre-growth of a thin GeO2 passivation layer can effectively suppress the interface states and improve the C V characteristics for the as-prepared HfO2 gated Ge MOS capacitors, but it also dissembles the benefits of wet thermal annealing to a certain extent.展开更多
A monolithically active-passive integrated colliding pulse mode-locked semiconductor laser is demonstrated in the InGaAsP//InP material system. The device is mode locked at the second harmonic passive mode-locking reg...A monolithically active-passive integrated colliding pulse mode-locked semiconductor laser is demonstrated in the InGaAsP//InP material system. The device is mode locked at the second harmonic passive mode-locking regime with a wide mode-locking range. Pulse trains with the repetition rate of 40 GHz, 3-dB rf line width of 25 kHz, the pulse width of 2.5 ps, and a nearly transform-limited time-bandwidth product of 0.53 are obtained.展开更多
A three-terminal silicon-based light emitting device is proposed and fabricated in standard 0.35 μm complementary metal-oxide-semiconductor technology. This device is capable of versatile working modes： it can emit ...A three-terminal silicon-based light emitting device is proposed and fabricated in standard 0.35 μm complementary metal-oxide-semiconductor technology. This device is capable of versatile working modes： it can emit visible to near infra-red （NIR） light （the spectrum ranges from 500 nm to 1000 nm） in reverse bias avalanche breakdown mode with working voltage between 8.35 V-12 V and emit NIR light （the spectrum ranges from 900 nm to 1300 nm） in the forward injection mode with working voltage below 2 V. An apparent modulation effect on the light intensity from the polysilicon gate is observed in the forward injection mode. Furthermore, when the gate oxide is broken down, NIR light is emitted from the polysilicon/oxide/silicon structure. Optoelectronic characteristics of the device working in different modes are measured and compared. The mechanisms behind these different emissions are explored.展开更多
In this paper, an efficient thermal analysis method is presented for large scale compound semiconductor integrated circuits based on a heterojunction bipolar transistor with considering the change of thermal conductiv...In this paper, an efficient thermal analysis method is presented for large scale compound semiconductor integrated circuits based on a heterojunction bipolar transistor with considering the change of thermal conductivity with temperature.The influence caused by the thermal conductivity can be equivalent to the increment of the local temperature surrounding the individual device. The junction temperature for each device can be efficiently calculated by the combination of the semianalytic temperature distribution function and the iteration of local temperature with high accuracy, providing a temperature distribution for a full chip. Applying this method to the InP frequency divider chip and the GaAs analog to digital converter chip, the computational results well agree with the results from the simulator COMSOL and the infrared thermal imager respectively. The proposed method can also be applied to thermal analysis in various kinds of semiconductor integrated circuits.展开更多
The optical catastrophic damage that usually occurs at the cavity surface of semiconductor lasers has become the main bottleneck affecting the improvement of laser output power and long-term reliability.To improve the...The optical catastrophic damage that usually occurs at the cavity surface of semiconductor lasers has become the main bottleneck affecting the improvement of laser output power and long-term reliability.To improve the output power of 680 nm AlGaInP/GaInP quantum well red semiconductor lasers,Si-Si_(3)N_(4)composited dielectric layers are used to induce its quantum wells to be intermixed at the cavity surface to make a non-absorption window.Si with a thickness of 100 nm and Si_(3)N_(4)with a thickness of 100 nm were grown on the surface of the epitaxial wafer by magnetron sputtering and PECVD as diffusion source and driving source,respectively.Compared with traditional Si impurity induced quantum well intermixing,this paper realizes the blue shift of 54.8 nm in the nonabsorbent window region at a lower annealing temperature of 600 ℃ and annealing time of 10 min.Under this annealing condition,the wavelength of the gain luminescence region basically does not shift to short wavelength,and the surface morphology of the whole epitaxial wafer remains fine after annealing.The application of this process condition can reduce the difficulty of production and save cost,which provides an effective method for upcoming fabrication.展开更多
In spintronics,it is still a challenge in experiments to realize the ferromagnetic semiconductors with Curie temperature Tc above room temperature.In 2017,the successful synthesis of two-dimensional(2D)van der Waals f...In spintronics,it is still a challenge in experiments to realize the ferromagnetic semiconductors with Curie temperature Tc above room temperature.In 2017,the successful synthesis of two-dimensional(2D)van der Waals ferromagnetic semiconductors,including the monolayer CrI3 with Tc=45 K[1]and the bilayer Cr2Ge2Te6 with Tc=28 K[2]in experiments,has attracted extensive attention in the 2D ferromagnetic semiconductors.One of the key problems is to find suitable 2D magnetic semiconductors,which can have room-temperature operation as required in applications.展开更多
We use traveling wave coupling theory to investigate the time domain characteristics of tapered semiconductor lasers with DBR gratings.We analyze the influence of the length of second order gratings on the power and s...We use traveling wave coupling theory to investigate the time domain characteristics of tapered semiconductor lasers with DBR gratings.We analyze the influence of the length of second order gratings on the power and spectrum of output light,and optimizing the length of gratings,in order to reduce the mode competition effect in the device,and obtain the high power output light wave with good longitudinal mode characteristics.展开更多
基金supported by the National Key R&D Program of China (Grant No. 2024YFA1408502)the National Natural Science Foundation of China (Grant Nos. 92365102, 62027807, 12474107, and 12174383)+1 种基金the Chinese Academy of Sciences project for Yong Scientists in Basic Research (Grant No. YSBR-030)the Guangdong Basic and Applied Basic Research Foundation (Grant No. 2024A1515011600)。
文摘We investigate the carrier, phonon, and spin dynamics in the ferromagnetic semiconductor(In,Fe)Sb using ultrafast optical pump-probe spectroscopy. We discover two anomalies near T^(*)(~40 K) and T^(†)(~200 K) in the photoexcited carrier dynamics, which can be attributed to the electron-spin and spin-lattice scattering processes influenced by the magnetic phase transition and modifications in magnetic anisotropy. The magnetization change can be revealed by the dynamics of coherent acoustic phonon. We also observe abrupt changes in the photoinduced spin dynamics near T^(*)and T^(†), which not only illustrate the spin-related scatterings closely related to the long-range magnetic order, but also reveal the D'yakonov–Perel and Elliott–Yafet mechanisms dominating at temperatures below and above T^(†), respectively. Our findings provide important insights into the nonequilibrium properties of the photoexcited(In,Fe)Sb.
基金supported by Rector’s fund of China Academy of Engineering Physics(Grant No.YZJJZQ2022002)the National Natural Science Foundation of China(Grant No.61504127).
文摘To optimize turn on velocity of the SiC LIMS,we proposed a new structure for the LIMS that incorporates an opti-mized n^(+)layer and a multi-light triggered electrode design for the anode.The chip size is 5.5 mm×5.5 mm in dimension.The experiment results indicate that the saturation laser energy required to trigger the prepared SiC LIMS has been decreased from 1.8 mJ to 40μJ,with the forward blocking voltage of the prepared SiC LIMSs capable of withstanding over 7000 V.The leakage current is about 0.3μA at room temperature,and the output current density achieves 4.25 kA/cm^(2)(with di/dt larger than 20 kA/μs).
基金supported by the National Key Research and Development Program of China(Grant Nos.2022YFA1402701 and 2022YFA1403202)the National Natural Science Foundation of China(Grant No.12074333)the Key Research and Development Program of Zhejiang Province,China(Grant No.2021C01002)。
文摘We report the manipulation of ferromagnetism in magnetic semiconductor Ba(Zn,Mn,Cu)_(2)As_(2)through chemical pressure.The substitutions of Sr for Ba and Sb for As introduce positive and negative chemical pressures,respectively;neither Sr doping nor Sb doping change the tetragonal crystal structure.Based on Ba(Zn_(0.75)Mn_(0.125)Cu_(0.125))_(2)As_(2)with T_(C)~34 K,10%Sr/Ba substitutions significantly improve T_(C)by~15%to 39 K,whereas 10%Sb/As substitutions substantially reduce TCby~47%to 18 K.The AC magnetic susceptibility measurements indicate that Sr-doped and Sb-doped samples evolve into a spin glass state below the spin freezing temperature Tf.Electrical transport measurements demonstrate that Sr-doped specimens retain semiconducting behavior;additionally,they display a significant negative magnetoresistance effect under applied magnetic fields and the magnetoresistance reaches~-19%at 8 T.
基金supported by the Fundamental Research Program of Shanxi Province(Nos.202303021212159 and 202303021222190)the National Natural Science Foundation of China(No.62222403)+2 种基金the Higher Education Institutions Science and Technology Innovation Program of Shanxi Province(No.2023L160)the Scientific Research Fund of Hunan Provincial Education Department(No.23B0842)the Natural Science Foundation of Shanxi Normal University(Nos.JCYJ2024017 and JCYJ2023015)。
文摘Doping plays a pivotal role in enhancing the performance of organic semiconductors(OSCs)for advanced optoelectronic and thermoelectric applications.In this study,we systematically investigated the doping performance and applicability of the ionic dopant 4-isopropyl-4′-methyldiphenyliodonium tetrakis(penta-fluorophenyl-borate)(DPI-TPFB)as a p-dopant for OSCs.Using the p-type OSC PBBT-2T as a model system,we demonstrated that DPI-TPFB shows significant doping effect,as confirmed by ESR spectra,ultraviolet-visible-near-infrared(UV-vis-NIR)absorption,and work function analysis,and enhances the electronic conductivity of PBBT-2T films by over four orders of magnitude.Furthermore,DPI-TPFB exhibited broad doping applicability,effectively doping various p-type OSCs and even imparting p-type characteristics to the n-type OSC N2200,transforming its intrinsic n-type behavior into p-type.The application of DPI-TPFB-doped PBBT-2T films in organic thermoelectric devices(OTEs)was also explored,achieving a power factor of approximately 10μW·m^(-1)·K^(-2).These findings highlight the potential of DPI-TPFB as a versatile and efficient dopant for integration into organic optoelectronic and thermoelectric devices.
基金Project supported by the National Natural Science Foundation of China(Nos.U21A20430 and 12302202)the Hebei Natural Science Foundation of China(No.A2023210040)+1 种基金the Science and Technology Project of Hebei Education Department of China(No.BJ2025005)the Hebei Provincial Department of Human Resources and Social Security of China(No.C20220324)。
文摘In this paper,we theoretically study the Lamb wave in a multilayered piezoelectric semiconductor(PSC)plate,where each layer is an n-type PSC with the symmetry of transverse isotropy.Based on the extended Stroh formalism and dual-variable and position(DVP)method,the general solution of the coupled fields for the Lamb wave is derived,and then the dispersion equation is obtained by the application of the boundary conditions.First,the influence of semiconducting properties on the dispersion behavior of the Lamb wave in a single-layer PSC plate is analyzed.Then,the propagation characteristics of the Lamb wave in a sandwich plate are investigated in detail.The numerical results show that the wave speed and attenuation depend on the stacking sequence,layer thickness,and initial carrier density,the Lamb wave can propagate without a cut-off frequency in both the homogeneous and multilayer PSC plates due to the semiconducting properties,and the Lamb wave without attenuation can be achieved by carefully selecting the semiconductor property in the upper and lower layers.These new features could be very helpful as theoretical guidance for the design and performance optimization of PSC devices.
文摘A new type of 785 nm semiconductor laser device has been proposed.The thin cladding and mode expansion layer structure incorporated into the epitaxy on the p-side significantly impacts the regulation of grating etching depth.Thinning of the p-side waveguide layer makes the light field bias to the n-side cladding layer.By coordinating the confinement effect of the cladding layer,the light confinement factor on the p-side is regulated.On the other hand,the introduction of a mode expansion layer facilitates the expansion of the mode profile on the p side cladding layer.Both these factors contribute positively to reducing the grating etching depth.Compared to the reported epitaxial structures of symmetric waveguides,the new structure significantly reduces the etching depth of the grating while ensuring adequate reflection intensity and maintaining resonance.Moreover,to improve the output performance of the device,the new epitaxial structure has been optimized.Based on the traditional epitaxial structure,an energy release layer and an electron blocking layer are added to improve the electronic recombination efficiency.This improved structure has an output performance comparable to that of a symmetric waveguide,despite being able to have a smaller gain area.
基金supported by the Natural Science Foundation of the Xinjiang Uygur Autonomous Region(2024D01E30)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB0880000)+1 种基金the Open Fund of the Anhui Key Laboratory of Photonic Materials and Devices(AHKL2024KF02)the National Natural Science Foundation of China(22475234,22335007,22193044 and 22361132544).
文摘Multifunctional semiconductors play an important role in developing advanced photoelectric technologies.In this work,based on an octahedral replacement strategy in chalcogenides,a new selenide semiconductor NaMn_(3)Ga_(3)Se_(8)was rationally designed,and synthesized by the flux method.The compound crystallizes in the noncentrosymmetric(NCS)P_(6)space group,and is composed of unique prismatic[NaSe_(6)],octahedral[MnSe_(6)]and tetrahedral[GaSe_(4)]motifs,inheriting the stable three-dimensional framework built by the octahedral and tetrahedral units in the A^(Ⅰ)Mg_(3)^(Ⅱ)C_(3)^(Ⅲ)Q_(8)^(Ⅵ)family.NaMn_(3)Ga_(3)Se_(8)shows the largest known secondary nonlinear optical(NLO)response of~2.1×AgGaS_(2)(AGS)in the A^(Ⅰ)Mg_(3)^(Ⅱ)C_(3)^(Ⅲ)Q_(8)^(Ⅵ)family,and a high laser-induced damage threshold of~3.0×AGS.Meanwhile,the introduction of Mn2t with unpaired 3d electrons induces a strong red emission band(685–805 nm)under the excitation source of 496 nm,as well as a paramagnetic to antiferromagnetic(AFM)transition at 7.3 K.The results confirm that NaMn_(3)Ga_(3)Se_(8)possesses multifunctional features including significant NLO response,fluorescence emission and AFM properties,and illustrate that replacing octahedral units with approaching size and geometry(like[MgSe_(6)]and[MnSe_(6)])could be a feasible way to develop multifunctional chalcogenides.
基金supported by the National Natural Science Foundation of China(61974125)the Open Innovation Fund for undergraduate students of Xiamen University(KFJJ-202411).
文摘Semiconductor photocatalysis holds great promise for renewable energy generation and environment remediation,but generally suffers from the serious drawbacks on light absorption,charge generation and transport,and structural stability that limit the performance.The core-shell semiconductorgraphene(CSSG)nanoarchitectures may address these issues due to their unique structures with exceptional physical and chemical properties.This review explores recent advances of the CSSG nanoarchitectures in the photocatalytic performance.It starts with the classification of the CSSG nanoarchitectures by the dimensionality.Then,the construction methods under internal and external driving forces were introduced and compared with each other.Afterward,the physicochemical properties and photocatalytic applications of these nanoarchitectures were discussed,with a focus on their role in photocatalysis.It ends with a summary and some perspectives on future development of the CSSG nanoarchitectures toward highly efficient photocatalysts with extensive application.By harnessing the synergistic capabilities of the CSSG architectures,we aim to address pressing environmental and energy challenges and drive scientific progress in these fields.
基金This work is supported by the National Key R&D Program of China(No.2021YFA1202200)the CAS Project for Young Scientists in Basic Research(No.YSBR-030)+1 种基金the National Natural Science Foundation Program of China(No.12174383)H L Wang also acknowledges the support from the Youth Innovation Promotion Association,Chinese Academy of Sciences(No.2021110).
文摘(Ga,Fe)Sb is a promising magnetic semiconductor(MS)for spintronic applications because its Curie temperature(T_(C))is above 300 K when the Fe concentration is higher than 20%.However,the anisotropy constant Ku of(Ga,Fe)Sb is below 7.6×10^(3)erg/cm^(3)when Fe concentration is lower than 30%,which is one order of magnitude lower than that of(Ga,Mn)As.To address this issue,we grew Ga_(1-x-y)Fe_(x)Ni_(y)Sb films with almost the same x(≈24%)and different y to characterize their magnetic and electrical transport properties.We found that the magnetic anisotropy of Ga_(0.76-y)Fe_(0.24)Ni_(y)Sb can be enhanced by increasing y,in which Ku is negligible at y=1.7%but increases to 3.8×10^(5)erg/cm^(3)at y=6.1%(T_(C)=354 K).In addition,the hole mobility(μ)of Ga_(1-x-y)Fe_(x)Ni_(y)Sb reaches 31.3 cm^(2)/(V∙s)at x=23.7%,y=1.7%(T_(C)=319 K),which is much higher than the mobility of Ga_(1-x)Fe_(x)Sb at x=25.2%(μ=6.2 cm^(2)/(V∙s)).Our results provide useful information for enhancing the magnetic anisotropy and hole mobility of(Ga,Fe)Sb by using Ni co-doping.
基金supported by the National Natural Science Foundation of China (Nos.52201043,12174172)the Natural Science Foundation of Fujian (No.2023J011396)+1 种基金the Fuzhou City Science and Technology Cooperation Project (No.2022-R-003)Fuzhou Industry Technology Innovation Center for Flexible Functional Materials.
文摘Triboelectric nanogenerator(TENG)utilizing tribovoltaic effect can directly produce direct current with high energy conversion efficiency,which expands their application in semiconductor devices and self-powered systems.This work compre-hensively summarizes the recent developments in semiconductor-based direct current TENGs(SDC-TENGs),which hold significant promise for DC energy harvesting technologies and semiconductor systems.First,the tribovoltaic effect is elucidated,and SDC-TENGs are categorized into six types based on different triboelectric structures:metal-semiconductor(M-S),metal-insula-tor-semiconductor(M-I-S),semiconductor-semiconductor(S-S),semiconductor-insulator-semiconductor(S-I-S),liquid-semiconductor(L-S),and metal/semiconductor-liquid-semiconductor(M/S-L-S)contact devices.Subsequent sections detail the operational mechanisms,strengths,and limitations of each category.Additionally,this paper outlines the enhancement mechanisms of SDC-TENGs providing guidance and recommendations for performance improvement.The conclusion high-lights potential application scenarios for various types of SDC-TENGs,outlining the prospective benefits and challenges.SDC-TENG technology is poised to drive revolutionary developments in semiconductor devices and self-powered systems.
基金supported by the National Key R&D Program of China,No.2022YFB4601201.
文摘The 975 nm multimode diode lasers with high-order surface Bragg diffraction gratings have been simulated and calcu-lated using the 2D finite difference time domain(FDTD)algorithm and the scattering matrix method(SMM).The periods and etch depth of the grating parameters have been optimized.A board area laser diode(BA-LD)with high-order diffraction grat-ings has been designed and fabricated.At output powers up to 10.5 W,the measured spectral width of full width at half maxi-mum(FWHM)is less than 0.5 nm.The results demonstrate that the designed high-order surface gratings can effectively nar-row the spectral width of multimode semiconductor lasers at high output power.
文摘The thickness and composition of the external laminae contain errors,leading to inaccuracies in the theoretical calculations and simulations associated with Fig.3,Fig.4,and Fig.5.However,as these theoretical calculations merely illustrate a trend and do not contradict the experimental results,a request for modification has been submitted.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61274046,61335009,61201103,and 61320106013)the National High Technology Research and Development Program of China(Grant No.2013AA014202)
文摘Internal loss is a key internal parameter for high power 1060-nm InGaAs/A1GaAs semiconductor laser. In this paper, we discuss the origin of internal loss of 1060-nm InGaAs/GaAs quantum welt （QW） AIGaAs separate confinement het- erostructure semiconductor laser, and the method to reduce internal loss. By light doping the n-cladding layer, and stepwise doping the p-cladding layer combined with the expanded waveguide layer, a broad area laser with internal loss of 1/cm is designed and fabricated. Ridge waveguide laser with an output power of 350 mW is obtained. The threshold current and slope efficiency near the threshold current are 20 mA and 0.8 W/A, respectively.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61176092,61036003,and 60837001)the National Basic Research Program of China (Grant No. 2012CB933503)+1 种基金the Ph.D. Program Foundation of Ministry of Education of China (Grant No. 20110121110025)the Fundamental Research Funds for the Central Universities,China (Grant No. 2010121056)
文摘Wet thermal annealing effects on the properties of TaN/HfO2/Ge metal-oxide-semiconductor （MOS） structures with and without a GeO2 passivation layer are investigated. The physical and the electrical properties are characterized by X-ray photoemission spectroscopy, high-resolution transmission electron microscopy, capacitance-voltage （C-V） and current-voltage characteristics. It is demonstrated that wet thermal annealing at relatively higher temperature such as 550 ℃ can lead to Ge incorporation in HfO2 and the partial crystallization of HfO2, which should be responsible for the serious degradation of the electrical characteristics of the TaN/HfO2/Ge MOS capacitors. However, wet thermal annealing at 400 ℃ can decrease the GeOx interlayer thickness at the HfO2/Ge interface, resulting in a significant reduction of the interface states and a smaller effective oxide thickness, along with the introduction of a positive charge in the dielectrics due to the hydrolyzable property of GeOx in the wet ambient. The pre-growth of a thin GeO2 passivation layer can effectively suppress the interface states and improve the C V characteristics for the as-prepared HfO2 gated Ge MOS capacitors, but it also dissembles the benefits of wet thermal annealing to a certain extent.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61335009,61274046 and 61474111
文摘A monolithically active-passive integrated colliding pulse mode-locked semiconductor laser is demonstrated in the InGaAsP//InP material system. The device is mode locked at the second harmonic passive mode-locking regime with a wide mode-locking range. Pulse trains with the repetition rate of 40 GHz, 3-dB rf line width of 25 kHz, the pulse width of 2.5 ps, and a nearly transform-limited time-bandwidth product of 0.53 are obtained.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.60536030,61036002,60776024,60877035 and 61036009)National High Technology Research and Development Program of China(Grant Nos.2007AA04Z329 and 2007AA04Z254)
文摘A three-terminal silicon-based light emitting device is proposed and fabricated in standard 0.35 μm complementary metal-oxide-semiconductor technology. This device is capable of versatile working modes： it can emit visible to near infra-red （NIR） light （the spectrum ranges from 500 nm to 1000 nm） in reverse bias avalanche breakdown mode with working voltage between 8.35 V-12 V and emit NIR light （the spectrum ranges from 900 nm to 1300 nm） in the forward injection mode with working voltage below 2 V. An apparent modulation effect on the light intensity from the polysilicon gate is observed in the forward injection mode. Furthermore, when the gate oxide is broken down, NIR light is emitted from the polysilicon/oxide/silicon structure. Optoelectronic characteristics of the device working in different modes are measured and compared. The mechanisms behind these different emissions are explored.
基金Project supported by the Advance Research Foundation of China(Grant No.9140Axxx501)the National Defense Advance Research Project,China(Grant No.3151xxxx301)+1 种基金the Frontier Innovation Program,China(Grant No.48xx4)the 111 Project,China(Grant No.B12026)
文摘In this paper, an efficient thermal analysis method is presented for large scale compound semiconductor integrated circuits based on a heterojunction bipolar transistor with considering the change of thermal conductivity with temperature.The influence caused by the thermal conductivity can be equivalent to the increment of the local temperature surrounding the individual device. The junction temperature for each device can be efficiently calculated by the combination of the semianalytic temperature distribution function and the iteration of local temperature with high accuracy, providing a temperature distribution for a full chip. Applying this method to the InP frequency divider chip and the GaAs analog to digital converter chip, the computational results well agree with the results from the simulator COMSOL and the infrared thermal imager respectively. The proposed method can also be applied to thermal analysis in various kinds of semiconductor integrated circuits.
基金supported by the National Natural Science Foundation of China(NNSFC)(Grant No.62174154).
文摘The optical catastrophic damage that usually occurs at the cavity surface of semiconductor lasers has become the main bottleneck affecting the improvement of laser output power and long-term reliability.To improve the output power of 680 nm AlGaInP/GaInP quantum well red semiconductor lasers,Si-Si_(3)N_(4)composited dielectric layers are used to induce its quantum wells to be intermixed at the cavity surface to make a non-absorption window.Si with a thickness of 100 nm and Si_(3)N_(4)with a thickness of 100 nm were grown on the surface of the epitaxial wafer by magnetron sputtering and PECVD as diffusion source and driving source,respectively.Compared with traditional Si impurity induced quantum well intermixing,this paper realizes the blue shift of 54.8 nm in the nonabsorbent window region at a lower annealing temperature of 600 ℃ and annealing time of 10 min.Under this annealing condition,the wavelength of the gain luminescence region basically does not shift to short wavelength,and the surface morphology of the whole epitaxial wafer remains fine after annealing.The application of this process condition can reduce the difficulty of production and save cost,which provides an effective method for upcoming fabrication.
文摘In spintronics,it is still a challenge in experiments to realize the ferromagnetic semiconductors with Curie temperature Tc above room temperature.In 2017,the successful synthesis of two-dimensional(2D)van der Waals ferromagnetic semiconductors,including the monolayer CrI3 with Tc=45 K[1]and the bilayer Cr2Ge2Te6 with Tc=28 K[2]in experiments,has attracted extensive attention in the 2D ferromagnetic semiconductors.One of the key problems is to find suitable 2D magnetic semiconductors,which can have room-temperature operation as required in applications.
文摘We use traveling wave coupling theory to investigate the time domain characteristics of tapered semiconductor lasers with DBR gratings.We analyze the influence of the length of second order gratings on the power and spectrum of output light,and optimizing the length of gratings,in order to reduce the mode competition effect in the device,and obtain the high power output light wave with good longitudinal mode characteristics.
