Background: Continuous Cover Forestry(CCF) is a type of forest management that is based on ecological, environmental, and biological principles. Specific definitions of CCF greatly vary and the concept usually include...Background: Continuous Cover Forestry(CCF) is a type of forest management that is based on ecological, environmental, and biological principles. Specific definitions of CCF greatly vary and the concept usually includes a number of tenets or criteria. The most important tenet of CCF is the requirement to abandon the practice of largescale clearfelling in favour of selective thinning/harvesting and natural regeneration methods.Methods: CCF is commonly believed to have its main origin in an academic debate that was conducted through publications in a number of European and North American countries towards the end of the 19th and the beginning of the 20th century. Our findings are exclusively based on a literature review of the history of CCF and they revealed that the European origins of CCF go much further back to a form of farm forestry that started to be practised in Central Europe in the 17th century. Eventually, this type of farm forestry led to the formation of the single-tree selection system as we know it today. Another influential tradition line contributing to modern CCF is individual-based forest management, which breaks forest stands down into small neighbourhood-based units. The centres of these units are dominant frame trees which form the framework of a forest stand. Consequently, management is only carried out in the local neighbourhood of frame trees. Individual-based forest management also modified inflexible area-control approaches of plantation forest management in favour of the flexible sizecontrol method.Results and conclusions: We found evidence that the three aforementioned tradition lines are equally important and much interacted in shaping modern CCF. Since CCF is an international accomplishment, it is helpful to thoroughly study the drivers and causes of such concepts. Understanding the gradual evolution can give valuable clues for the introduction and adaptation of CCF in countries where the concept is new.展开更多
Background: The increasing availability of remotely sensed data has recently challenged the traditional way of performing forest inventories, and induced an interest in model-based inference. Like traditional design-b...Background: The increasing availability of remotely sensed data has recently challenged the traditional way of performing forest inventories, and induced an interest in model-based inference. Like traditional design-based inference, model-based inference allows for regional estimates of totals and means, but in addition for wall-to-wall mapping of forest characteristics. Recently Light Detection and Ranging(LiDAR)-based maps of forest attributes have been developed in many countries and been well received by users due to their accurate spatial representation of forest resources. However, the correspondence between such mapping and model-based inference is seldom appreciated. In this study we applied hierarchical model-based inference to produce aboveground biomass maps as well as maps of the corresponding prediction uncertainties with the same spatial resolution. Further, an estimator of mean biomass at regional level, and its uncertainty, was developed to demonstrate how mapping and regional level assessment can be combined within the framework of model-based inference.Results: Through a new version of hierarchical model-based estimation, allowing models to be nonlinear, we accounted for uncertainties in both the individual tree-level biomass models and the models linking plot level biomass predictions with LiDAR metrics. In a 5005 km2 large study area in south-central Sweden the predicted aboveground biomass at the level of 18 m×18 m map units was found to range between 9 and 447 Mg·ha^-1. The corresponding root mean square errors ranged between 10 and 162 Mg·ha^-1. For the entire study region, the mean aboveground biomass was 55 Mg·ha^-1 and the corresponding relative root mean square error 8%. At this level 75%of the mean square error was due to the uncertainty associated with tree-level models.Conclusions: Through the proposed method it is possible to link mapping and estimation within the framework of model-based inference. Uncertainties in both tree-level biomass models and models linking plot level biomass with LiDAR data are accounted for, both for the uncertainty maps and the overall estimates. The development of hierarchical model-based inference to handle nonlinear models was an important prerequisite for the study.展开更多
Background： Analysing and modelling plant growth is an important interdisciplinary field of plant science. The use of relative growth rates, involving the analysis of plant growth relative to plant size, has more or ...Background： Analysing and modelling plant growth is an important interdisciplinary field of plant science. The use of relative growth rates, involving the analysis of plant growth relative to plant size, has more or less independently emerged in different research groups and at different times and has provided powerful tools for assessing the growth performance and growth efficiency of plants and plant populations. In this paper, we explore how these isolated methods can be combined to form a consistent methodology for modelling relative growth rates. Methods： We review and combine existing methods of analysing and modelling relative growth rates and apply a combination of methods to Sitka spruce （Piceo sitchensis （Bong.） Carr.） stem-analysis data from North Wales （UK） and British Douglas fir （Pseudotsugd menziesii （Mirb.） Franco） yield table data. Results： The results indicate that, by combining the approaches of different plant-growth analysis laboratories and using them simultaneously, we can advance and standardise the concept of relative plant growth. Particularly the growth multiplier plays an important role in modelling relative growth rates. Another useful technique has been the recent introduction of size-standardised relative growth rates. Conclusions： Modelling relative growth rates mainly serves two purposes, 1） an improved analysis of growth performance and efficiency and 2） the prediction of future or past growth rates. This makes the concept of relative growth ideally suited to growth reconstruction as required in dendrochronology, climate change and forest decline research and for interdisciplinary research projects beyond the realm of plant science.展开更多
Flow cytometry is now a recognized methodology within animal spermatology, and has moved from being a research tool to become routine in the assessment of animal semen destined to breeding. The availability of ＇bench...Flow cytometry is now a recognized methodology within animal spermatology, and has moved from being a research tool to become routine in the assessment of animal semen destined to breeding. The availability of ＇bench-top＇ flow cytometers and of newer and versatile markers for cell structure and function had allowed the instrumentation to measure more sperm parameters, from viability to reactiveness when exposed to exogenous stimuli, and to increase our capabilities to sort spermatozoa for potential fertilizing capacity, or chromosomal sex. The present review summarizes the state of the art regarding flow cytometry applied to animal andrology, albeit keeping an open comparative intent. It critically evaluates the present and future capabilities of flow cytometry for the diagnostics of potential fertility and for the development of current reproductive technologies such as sperm freezing, sperm selection and sperm sorting. The flow cytometry methods will probably further revolutionize our understanding of the sperm physiology and their functionality, and will undoubtedly extend its application in isolating many uncharacterized features of spermatozoa. However, continuous follow-up of the methods is a necessity owing to technical developments and the complexity of mapping spermatozoa.展开更多
Wise utilization of water resources is becoming very important as world faces water crises. The main objective of this study was to investigate the rural water supply systems with case study in Adama area, in central ...Wise utilization of water resources is becoming very important as world faces water crises. The main objective of this study was to investigate the rural water supply systems with case study in Adama area, in central Ethiopia. Both quantitative and qualitative data were collected and analyzed. Four sample water schemes were selected and totally 148 (63 were female) representative households were selected for answering the questionnaires. Key informant interviews and group discussions were also conducted. The study assessed issues such as community participation, water committee empowerment, management and governance of water supply schemes, women participation, functional status of water supply scheme, sanitation and hygiene issues, external support, and monitoring system of water supply schemes. The findings indicated that the community participation in planning and implementation was very good while monitoring mechanism of operation and management as well as community participation on choice of technology was poor. The water schemes were located at reasonable distances i.e. less than 2 km in most cases and the time taken for round trip to fetch water from source was less than or equal to 30 minutes in most cases, however the queuing time was more than an hour. The water supply was inadequate as only about 15% of beneficiaries could get 20 liters of water per day per capita. The water sources were exposed in many cases to human waste, wild life, livestock and uncontrolled flooding. Sanitary practices in the study area were poor as only about 3.4% had ventilated and improved pit latrine and open pit and/or open field defecation were widely practiced.展开更多
Background:A number of hypotheses and theories,such as the Janzen-Connell hypothesis,have been proposed to explain the natural maintenance of biodiversity in tropical and temperate forest ecosystems.However,to date th...Background:A number of hypotheses and theories,such as the Janzen-Connell hypothesis,have been proposed to explain the natural maintenance of biodiversity in tropical and temperate forest ecosystems.However,to date the details of the processes behind this natural maintenance are still unclear.Recently two new nearest-neighbour characteristics were proposed and in this paper we demonstrate how they can contribute to a better understanding of the ontogenesis of global forest structure from localised neighbourhoods.Methods:We applied the new species and size segregation functions together with appropriate test procedures to four example woodland data sets from China at Daqingshan,Jiaohe,Jiulongshan and Xiaolongshan forest regions.In addition we quantified the morphology of the new characteristics and modelled a neighbourhood allometric coefficient linking the two functions.Results:The results revealed quite different species segregation patterns with both conspecific and heterospecific attraction.We found these to be generally matched by equivalent size segregation patterns of attraction of similar and different sizes.It was straightforward to model the size segregation function from the knowledge of the species segregation function by estimating a neighbourhood allometric coefficient.Conclusions:The new characteristics have helped to quantify the extent and rate of decline of neighbourhood interactions in terms of spatial species and size diversity.Through the allometric neighbourhood coefficient the analysis highlighted once more how closely related species and size segregation are,thus supporting the minglingsize hypothesis.Using both a traditional and a restricted random-labelling test has provided a valuable tool for understanding the exact nature of species-mingling and size-inequality relationships.展开更多
Single sequence repeat（SSR） multiplexing is a semi high-throughput PCR methodology for the analysis of multiple SSRs.We developed two SSR multiplexes selected from SSR loci previously reported in the pine literature...Single sequence repeat（SSR） multiplexing is a semi high-throughput PCR methodology for the analysis of multiple SSRs.We developed two SSR multiplexes selected from SSR loci previously reported in the pine literature and tested the transferability of both SSR multiplexes in nine other pine species.We tested 234 nuclear SSR loci（n SSRs） previously described in the pine literature and selected ten n SSRs following the simple criteria of interpretability and reproducibility.Selected nuclear loci were divided into two n SSRs multiplex sets and their amplification was optimized for three different multiplex PCR methods based on：（a） a custom PCR protocol,（b） a custom protocol with hotstart taq polymerase,and（c） a commercially available kit for SSR multiplexing.To validate their performance,the level of genetic diversity was assessed in three Scots pine natural populations（Hungary,northern Sweden and southern Sweden）.In addition,we also tested the transferability of these multiplexes in nine other pine species.We have developed two n SSRs multiplexes of five loci each that will contribute to reduce the costs of n SSR scoring,while increasing the capacity of n SSR loci analysis.Amplification was successful in all three populations（94 % success） and the level of polymorphism（7.1 alleles/marker） was similar to that previously reported for other Scots pine natural populations.Transferability of both multiplexes was successful for those pine species closely related to Scots pine.展开更多
This study aims to assess the impact of monospecific Tectona grandis forest plantation on the soil mite abundance and diversity. To achieve these objectives, two sites situated in Ivory Coast were investigated. The fi...This study aims to assess the impact of monospecific Tectona grandis forest plantation on the soil mite abundance and diversity. To achieve these objectives, two sites situated in Ivory Coast were investigated. The first, a primary forest was characterized by a very weak human activities whereas the second, a teak plantation was characterized by a high disturbance performed during the planting. After extracting, sorted and description, 116 mite species were described in the two sites. Mite densities were lower in teak plantation and also higher in the litter and decreased to the depth in both sites. Species richness re- corded in teak plantation （52 species） was significantly lower compared to primary forest （98 species）. The same trend was ob- served for Oribatida but not for Gamasida. The lower Oribatida （5 vs. 17） and higher Oribatida （24 vs. 41） were recorded respec- tively in teak plantation and primary forest. Mite Shannon index and evenness were significantly different between sites. High Jaccard index values and the appearance of exclusive species in both habitats showed that the sites are very distinct. Total number of species recorded corresponded to 58%-63% of the total number of species estimated by ACE and Chao 1＆2 estimators, indi- cating that the sampling effort was not sufficient. Mite abundance and diversity varied depending on the characteristics of habi- tats. Chemical element （Corn, Ctot, Ntot, and SOM） values were lower in teak plantation （disturbed habitat） and significantly dif- ferent to primary forest in the topsoil. Apart from litter height, soil depth, pH and C/N ratio, others variables were strongly corre- lated to mite abundance and diversity [Current Zoology 59 （5）： 633-643, 2013].展开更多
This review provides a summary of botanicals and plant strengtheners that have potential uses for disease and pest management in potato and tomato cultivation in African.We discuss their possible use to prevent major ...This review provides a summary of botanicals and plant strengtheners that have potential uses for disease and pest management in potato and tomato cultivation in African.We discuss their possible use to prevent major diseases and pests which infest potato and tomato,such as early and late blight,bacterial wilt,potato tuber moth,and tomato leafminer.There are several examples of the successful uses of botanicals for pathogen and pest control relevant for different African climatic conditions;however,most of these studies have been conducted in vitro and often lack field verification.Plant strengtheners(substances that induce and improve crop resistance,yield,and quality)are little studied and used in Africa in comparison to North America and Europe.The possible benefits of using botanicals and plant strengtheners instead of conventional pesticides are discussed here in relation to human health and the environment as well as their modes of action and accessibility to farmers.Lack of knowledge of the composition and active ingredients of extracts,environmental concerns,uncertainties regarding stability and formulation,lack of legislation and limited support from governments,hamper the development of botanicals and plant strengtheners for use in sustainable African agriculture.展开更多
The bottom ash and fly ash from the co-combustion of wood residues and peat at a bubbling fluidised bed boiler（296 MW） contained only quartz（SiO_2）, microcline（KAl Si_3O_8） and albite（NaAlSi_3O_8）. Thus, X-ray...The bottom ash and fly ash from the co-combustion of wood residues and peat at a bubbling fluidised bed boiler（296 MW） contained only quartz（SiO_2）, microcline（KAl Si_3O_8） and albite（NaAlSi_3O_8）. Thus, X-ray powder diffraction（XRD） was not useful for clarifying the difference in the release of associated heavy metals from ash matrices. In order to assess the release of heavy metals from ashes under changing environmental conditions, they were sequentially extracted and fractionated by the BCR-procedure into acid soluble/exchangeable（CH_3COOH）, reducible（NH_2OH-HCl） and oxidizable（H_2O_2/CH_3COONH_4） phases. The CH_3 COOH extractable fraction in conjunction with the total heavy metals concentrations were used to calculate the risk assessment code values for heavy metals leaching from the ash matrix. The leaching studies indicate that the heavy metals in the bottom ash and fly ash are bound to different fractions with different strengths. From the environmental and utilization perspectives, heavy metals in ashes posed different levels of environmental contamination risk. Only As in the bottom ash posed a very high risk. High risk metals were Cd in the bottom ash as well as As, Cd and Se in the fly ash.展开更多
Fructans are important in the survival of plants and also valuable for humans as potentially health promoting food ingredients. In this study fructan content and composition were determined in grains of 20 barley bree...Fructans are important in the survival of plants and also valuable for humans as potentially health promoting food ingredients. In this study fructan content and composition were determined in grains of 20 barley breeding lines and cultivars with a wide variation in chemical composition, morphology and country of origin, grown at one site in Chile. There was significant genotypic variation in grain fructan content ranging from 0.9% to 4.2% of grain dry weight. Fructan degree of polymerisation (DP) was analysed using high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). Changes in the distribution of different chain lengths and the pattern of structures of fructan were detected with increasing amount of fructan in the different barleys. A positive correlation was found between fructan content and the relative amount of long chain fructan (DP > 9) (r = 0.54, p = 0.021). Our results provide a basis for selecting promising barley lines and cultivars for further research on fructan in barley breeding with the aim to produce healthy food products.展开更多
Emerging evidence suggests that dietary fats may influence testicular function. However, most of the published literature on this field has used semen quality parameters as the only proxy for testicular function. We e...Emerging evidence suggests that dietary fats may influence testicular function. However, most of the published literature on this field has used semen quality parameters as the only proxy for testicular function. We examined the association of fat intake with circulating reproductive hormone levels and testicular volume among healthy young Spanish men. This is a cross-sectional study among 209 healthy male volunteers conducted between October 2010 and November 2011 in Murcia Region of Spain. Participants completed questionnaires on lifestyle, diet, and smoking, and each underwent a physical examination, and provided a blood sample. Linear regression was used to examine the association between each fatty acid type and reproductive hormone levels and testicular volumes. Monounsaturated fatty acids intake was inversely associated with serum blood levels of calculated free testosterone, total testosterone, and inhibin B. A positive association was observed between the intake of polyunsaturated fatty acids, particularly of omega-6 polyunsaturated fatty acids, and luteinizing hormone concentrations. In addition, the intake of trans fatty acids was associated with lower total testosterone and calculated free testosterone concentrations （Ptrend = 0.01 and 0.02, respectively）. The intake of omega-3 polyunsaturated fatty acids was positively related to testicular volume while the intake of omega-6 polyunsaturated fatty acids and trans fatty acids was inversely related to testicular volume. These data suggest that fat intake, and particularly intake of omega 3, omega 6, and trans fatty acids, may influence testicular function.展开更多
基金supported by the Swedish Government Research Council for Sustainable Development(Formas)grant#2023-00994.
文摘Background: Continuous Cover Forestry(CCF) is a type of forest management that is based on ecological, environmental, and biological principles. Specific definitions of CCF greatly vary and the concept usually includes a number of tenets or criteria. The most important tenet of CCF is the requirement to abandon the practice of largescale clearfelling in favour of selective thinning/harvesting and natural regeneration methods.Methods: CCF is commonly believed to have its main origin in an academic debate that was conducted through publications in a number of European and North American countries towards the end of the 19th and the beginning of the 20th century. Our findings are exclusively based on a literature review of the history of CCF and they revealed that the European origins of CCF go much further back to a form of farm forestry that started to be practised in Central Europe in the 17th century. Eventually, this type of farm forestry led to the formation of the single-tree selection system as we know it today. Another influential tradition line contributing to modern CCF is individual-based forest management, which breaks forest stands down into small neighbourhood-based units. The centres of these units are dominant frame trees which form the framework of a forest stand. Consequently, management is only carried out in the local neighbourhood of frame trees. Individual-based forest management also modified inflexible area-control approaches of plantation forest management in favour of the flexible sizecontrol method.Results and conclusions: We found evidence that the three aforementioned tradition lines are equally important and much interacted in shaping modern CCF. Since CCF is an international accomplishment, it is helpful to thoroughly study the drivers and causes of such concepts. Understanding the gradual evolution can give valuable clues for the introduction and adaptation of CCF in countries where the concept is new.
基金Funding was provided by the Swedish NFI Development Foundationthe Swedish Kempe Foundation (SMK-1847)。
文摘Background: The increasing availability of remotely sensed data has recently challenged the traditional way of performing forest inventories, and induced an interest in model-based inference. Like traditional design-based inference, model-based inference allows for regional estimates of totals and means, but in addition for wall-to-wall mapping of forest characteristics. Recently Light Detection and Ranging(LiDAR)-based maps of forest attributes have been developed in many countries and been well received by users due to their accurate spatial representation of forest resources. However, the correspondence between such mapping and model-based inference is seldom appreciated. In this study we applied hierarchical model-based inference to produce aboveground biomass maps as well as maps of the corresponding prediction uncertainties with the same spatial resolution. Further, an estimator of mean biomass at regional level, and its uncertainty, was developed to demonstrate how mapping and regional level assessment can be combined within the framework of model-based inference.Results: Through a new version of hierarchical model-based estimation, allowing models to be nonlinear, we accounted for uncertainties in both the individual tree-level biomass models and the models linking plot level biomass predictions with LiDAR metrics. In a 5005 km2 large study area in south-central Sweden the predicted aboveground biomass at the level of 18 m×18 m map units was found to range between 9 and 447 Mg·ha^-1. The corresponding root mean square errors ranged between 10 and 162 Mg·ha^-1. For the entire study region, the mean aboveground biomass was 55 Mg·ha^-1 and the corresponding relative root mean square error 8%. At this level 75%of the mean square error was due to the uncertainty associated with tree-level models.Conclusions: Through the proposed method it is possible to link mapping and estimation within the framework of model-based inference. Uncertainties in both tree-level biomass models and models linking plot level biomass with LiDAR data are accounted for, both for the uncertainty maps and the overall estimates. The development of hierarchical model-based inference to handle nonlinear models was an important prerequisite for the study.
文摘Background： Analysing and modelling plant growth is an important interdisciplinary field of plant science. The use of relative growth rates, involving the analysis of plant growth relative to plant size, has more or less independently emerged in different research groups and at different times and has provided powerful tools for assessing the growth performance and growth efficiency of plants and plant populations. In this paper, we explore how these isolated methods can be combined to form a consistent methodology for modelling relative growth rates. Methods： We review and combine existing methods of analysing and modelling relative growth rates and apply a combination of methods to Sitka spruce （Piceo sitchensis （Bong.） Carr.） stem-analysis data from North Wales （UK） and British Douglas fir （Pseudotsugd menziesii （Mirb.） Franco） yield table data. Results： The results indicate that, by combining the approaches of different plant-growth analysis laboratories and using them simultaneously, we can advance and standardise the concept of relative plant growth. Particularly the growth multiplier plays an important role in modelling relative growth rates. Another useful technique has been the recent introduction of size-standardised relative growth rates. Conclusions： Modelling relative growth rates mainly serves two purposes, 1） an improved analysis of growth performance and efficiency and 2） the prediction of future or past growth rates. This makes the concept of relative growth ideally suited to growth reconstruction as required in dendrochronology, climate change and forest decline research and for interdisciplinary research projects beyond the realm of plant science.
文摘Flow cytometry is now a recognized methodology within animal spermatology, and has moved from being a research tool to become routine in the assessment of animal semen destined to breeding. The availability of ＇bench-top＇ flow cytometers and of newer and versatile markers for cell structure and function had allowed the instrumentation to measure more sperm parameters, from viability to reactiveness when exposed to exogenous stimuli, and to increase our capabilities to sort spermatozoa for potential fertilizing capacity, or chromosomal sex. The present review summarizes the state of the art regarding flow cytometry applied to animal andrology, albeit keeping an open comparative intent. It critically evaluates the present and future capabilities of flow cytometry for the diagnostics of potential fertility and for the development of current reproductive technologies such as sperm freezing, sperm selection and sperm sorting. The flow cytometry methods will probably further revolutionize our understanding of the sperm physiology and their functionality, and will undoubtedly extend its application in isolating many uncharacterized features of spermatozoa. However, continuous follow-up of the methods is a necessity owing to technical developments and the complexity of mapping spermatozoa.
文摘Wise utilization of water resources is becoming very important as world faces water crises. The main objective of this study was to investigate the rural water supply systems with case study in Adama area, in central Ethiopia. Both quantitative and qualitative data were collected and analyzed. Four sample water schemes were selected and totally 148 (63 were female) representative households were selected for answering the questionnaires. Key informant interviews and group discussions were also conducted. The study assessed issues such as community participation, water committee empowerment, management and governance of water supply schemes, women participation, functional status of water supply scheme, sanitation and hygiene issues, external support, and monitoring system of water supply schemes. The findings indicated that the community participation in planning and implementation was very good while monitoring mechanism of operation and management as well as community participation on choice of technology was poor. The water schemes were located at reasonable distances i.e. less than 2 km in most cases and the time taken for round trip to fetch water from source was less than or equal to 30 minutes in most cases, however the queuing time was more than an hour. The water supply was inadequate as only about 15% of beneficiaries could get 20 liters of water per day per capita. The water sources were exposed in many cases to human waste, wild life, livestock and uncontrolled flooding. Sanitary practices in the study area were poor as only about 3.4% had ventilated and improved pit latrine and open pit and/or open field defecation were widely practiced.
基金partly supported by the Guangxi Innovation Driven Development Project(No.AA17204087-8)funded by the National Natural Science Foundation of China(project No.31670640)。
文摘Background:A number of hypotheses and theories,such as the Janzen-Connell hypothesis,have been proposed to explain the natural maintenance of biodiversity in tropical and temperate forest ecosystems.However,to date the details of the processes behind this natural maintenance are still unclear.Recently two new nearest-neighbour characteristics were proposed and in this paper we demonstrate how they can contribute to a better understanding of the ontogenesis of global forest structure from localised neighbourhoods.Methods:We applied the new species and size segregation functions together with appropriate test procedures to four example woodland data sets from China at Daqingshan,Jiaohe,Jiulongshan and Xiaolongshan forest regions.In addition we quantified the morphology of the new characteristics and modelled a neighbourhood allometric coefficient linking the two functions.Results:The results revealed quite different species segregation patterns with both conspecific and heterospecific attraction.We found these to be generally matched by equivalent size segregation patterns of attraction of similar and different sizes.It was straightforward to model the size segregation function from the knowledge of the species segregation function by estimating a neighbourhood allometric coefficient.Conclusions:The new characteristics have helped to quantify the extent and rate of decline of neighbourhood interactions in terms of spatial species and size diversity.Through the allometric neighbourhood coefficient the analysis highlighted once more how closely related species and size segregation are,thus supporting the minglingsize hypothesis.Using both a traditional and a restricted random-labelling test has provided a valuable tool for understanding the exact nature of species-mingling and size-inequality relationships.
基金supported by GENECAR and Kempe foundation through the Research School in Forest GeneticsBreeding at the Swedish University of Agricultural Sciences(SLU),Umea,Sweden
文摘Single sequence repeat（SSR） multiplexing is a semi high-throughput PCR methodology for the analysis of multiple SSRs.We developed two SSR multiplexes selected from SSR loci previously reported in the pine literature and tested the transferability of both SSR multiplexes in nine other pine species.We tested 234 nuclear SSR loci（n SSRs） previously described in the pine literature and selected ten n SSRs following the simple criteria of interpretability and reproducibility.Selected nuclear loci were divided into two n SSRs multiplex sets and their amplification was optimized for three different multiplex PCR methods based on：（a） a custom PCR protocol,（b） a custom protocol with hotstart taq polymerase,and（c） a commercially available kit for SSR multiplexing.To validate their performance,the level of genetic diversity was assessed in three Scots pine natural populations（Hungary,northern Sweden and southern Sweden）.In addition,we also tested the transferability of these multiplexes in nine other pine species.We have developed two n SSRs multiplexes of five loci each that will contribute to reduce the costs of n SSR scoring,while increasing the capacity of n SSR loci analysis.Amplification was successful in all three populations（94 % success） and the level of polymorphism（7.1 alleles/marker） was similar to that previously reported for other Scots pine natural populations.Transferability of both multiplexes was successful for those pine species closely related to Scots pine.
文摘This study aims to assess the impact of monospecific Tectona grandis forest plantation on the soil mite abundance and diversity. To achieve these objectives, two sites situated in Ivory Coast were investigated. The first, a primary forest was characterized by a very weak human activities whereas the second, a teak plantation was characterized by a high disturbance performed during the planting. After extracting, sorted and description, 116 mite species were described in the two sites. Mite densities were lower in teak plantation and also higher in the litter and decreased to the depth in both sites. Species richness re- corded in teak plantation （52 species） was significantly lower compared to primary forest （98 species）. The same trend was ob- served for Oribatida but not for Gamasida. The lower Oribatida （5 vs. 17） and higher Oribatida （24 vs. 41） were recorded respec- tively in teak plantation and primary forest. Mite Shannon index and evenness were significantly different between sites. High Jaccard index values and the appearance of exclusive species in both habitats showed that the sites are very distinct. Total number of species recorded corresponded to 58%-63% of the total number of species estimated by ACE and Chao 1＆2 estimators, indi- cating that the sampling effort was not sufficient. Mite abundance and diversity varied depending on the characteristics of habi- tats. Chemical element （Corn, Ctot, Ntot, and SOM） values were lower in teak plantation （disturbed habitat） and significantly dif- ferent to primary forest in the topsoil. Apart from litter height, soil depth, pH and C/N ratio, others variables were strongly corre- lated to mite abundance and diversity [Current Zoology 59 （5）： 633-643, 2013].
基金the AgriFose2030 programmethe swedish International Development Cooperation Agency (SIDA)the Swedish Foundation for International Cooperation in Research and Higher Education (STINT) for financial support
文摘This review provides a summary of botanicals and plant strengtheners that have potential uses for disease and pest management in potato and tomato cultivation in African.We discuss their possible use to prevent major diseases and pests which infest potato and tomato,such as early and late blight,bacterial wilt,potato tuber moth,and tomato leafminer.There are several examples of the successful uses of botanicals for pathogen and pest control relevant for different African climatic conditions;however,most of these studies have been conducted in vitro and often lack field verification.Plant strengtheners(substances that induce and improve crop resistance,yield,and quality)are little studied and used in Africa in comparison to North America and Europe.The possible benefits of using botanicals and plant strengtheners instead of conventional pesticides are discussed here in relation to human health and the environment as well as their modes of action and accessibility to farmers.Lack of knowledge of the composition and active ingredients of extracts,environmental concerns,uncertainties regarding stability and formulation,lack of legislation and limited support from governments,hamper the development of botanicals and plant strengtheners for use in sustainable African agriculture.
文摘The bottom ash and fly ash from the co-combustion of wood residues and peat at a bubbling fluidised bed boiler（296 MW） contained only quartz（SiO_2）, microcline（KAl Si_3O_8） and albite（NaAlSi_3O_8）. Thus, X-ray powder diffraction（XRD） was not useful for clarifying the difference in the release of associated heavy metals from ash matrices. In order to assess the release of heavy metals from ashes under changing environmental conditions, they were sequentially extracted and fractionated by the BCR-procedure into acid soluble/exchangeable（CH_3COOH）, reducible（NH_2OH-HCl） and oxidizable（H_2O_2/CH_3COONH_4） phases. The CH_3 COOH extractable fraction in conjunction with the total heavy metals concentrations were used to calculate the risk assessment code values for heavy metals leaching from the ash matrix. The leaching studies indicate that the heavy metals in the bottom ash and fly ash are bound to different fractions with different strengths. From the environmental and utilization perspectives, heavy metals in ashes posed different levels of environmental contamination risk. Only As in the bottom ash posed a very high risk. High risk metals were Cd in the bottom ash as well as As, Cd and Se in the fly ash.
基金Financial support from BarleyFunFood–Barley for Functional Food and Feed,a joint program granted by the Faculty of Natural Resources and Agricultural Sciences,SLU,and Lantmännen AB is gratefully acknowledged.
文摘Fructans are important in the survival of plants and also valuable for humans as potentially health promoting food ingredients. In this study fructan content and composition were determined in grains of 20 barley breeding lines and cultivars with a wide variation in chemical composition, morphology and country of origin, grown at one site in Chile. There was significant genotypic variation in grain fructan content ranging from 0.9% to 4.2% of grain dry weight. Fructan degree of polymerisation (DP) was analysed using high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). Changes in the distribution of different chain lengths and the pattern of structures of fructan were detected with increasing amount of fructan in the different barleys. A positive correlation was found between fructan content and the relative amount of long chain fructan (DP > 9) (r = 0.54, p = 0.021). Our results provide a basis for selecting promising barley lines and cultivars for further research on fructan in barley breeding with the aim to produce healthy food products.
文摘Emerging evidence suggests that dietary fats may influence testicular function. However, most of the published literature on this field has used semen quality parameters as the only proxy for testicular function. We examined the association of fat intake with circulating reproductive hormone levels and testicular volume among healthy young Spanish men. This is a cross-sectional study among 209 healthy male volunteers conducted between October 2010 and November 2011 in Murcia Region of Spain. Participants completed questionnaires on lifestyle, diet, and smoking, and each underwent a physical examination, and provided a blood sample. Linear regression was used to examine the association between each fatty acid type and reproductive hormone levels and testicular volumes. Monounsaturated fatty acids intake was inversely associated with serum blood levels of calculated free testosterone, total testosterone, and inhibin B. A positive association was observed between the intake of polyunsaturated fatty acids, particularly of omega-6 polyunsaturated fatty acids, and luteinizing hormone concentrations. In addition, the intake of trans fatty acids was associated with lower total testosterone and calculated free testosterone concentrations （Ptrend = 0.01 and 0.02, respectively）. The intake of omega-3 polyunsaturated fatty acids was positively related to testicular volume while the intake of omega-6 polyunsaturated fatty acids and trans fatty acids was inversely related to testicular volume. These data suggest that fat intake, and particularly intake of omega 3, omega 6, and trans fatty acids, may influence testicular function.
