Communication skills are the most important skills that students need in their academic as well as professional fields.Students,especially those in the English department,may be involved in various activities such as ...Communication skills are the most important skills that students need in their academic as well as professional fields.Students,especially those in the English department,may be involved in various activities such as presentations,group discussions,and debates,and soon they need to master communication skills to effectively perform these tasks.This study aims to investigate the communication skills of the third-year students of the English department at Quaid e Awam University Nawabshah.Here,four communication skills,namely reading skills,speaking skills,listening skills,and writing skills,are analyzed using descriptive statistics through an online 4-point Likert scale questionnaire.Data were collected from 34 respondents,based on four dimensions:reading skills,listening skills,writing skills,and speaking skills.The site of the study was Quaid-e-Awam University of Engineering,Science and Technology,Nawabshah.The findings of the study reveal insightful outcomes.Based on the outcomes of the study,it is suggested that the study can be replicated in the context of schools which the acquisition of these four skills is mandatory for high academic achievements.展开更多
This study aimed to fabricate new and effective material for the efficiency of phosphate adsorption.Two types of adsorbent materials,the zirconium hydroxides embedded in pomegranate peel(Zr/Peel)and zirconium-lanthanu...This study aimed to fabricate new and effective material for the efficiency of phosphate adsorption.Two types of adsorbent materials,the zirconium hydroxides embedded in pomegranate peel(Zr/Peel)and zirconium-lanthanum hydroxides embedded in pomegranate peel(Zr-La/Peel)were developed.Scanning electronic microscopy(SEM),x-ray photoelectron spectroscopy(XPS)and x-ray diffraction(XRD)were evaluated to give insight into the physicochemical properties of these adsorbents.Zr-La/Peel exceeded the adsorption efficiency of Zr/Peel adsorbents in batch adsorption experiments at the same pH level.The peel as a host can strive to have a strong"shielding effect"to increase the steadiness of the entrenched Zr and La elements.La and Zr are hydroxide metals that emit many hydrogen ions during the hydrolysis reaction,which contribute to protonation and electrostatic attraction.The highest adsorption capacity of La-Zr/Peel for phosphate was calculated to be40.21 mg/g,and pseudo second-order equation is very well fitted for kinetic adsorption.Phosphate adsorption efficiency was reduced by an increase of pH.With the background of coexisting Cl-,little effect on adsorption efficiency was observed,while adsorption capacities were reduced by almost 20-30%with the coexistence of SO42-,NO3-and humic acid(HA).展开更多
This investigative study is focused on the impact of wavelet on traditional forecasting time-series models,which significantly shows the usage of wavelet algorithms.Wavelet Decomposition(WD)algorithm has been combined...This investigative study is focused on the impact of wavelet on traditional forecasting time-series models,which significantly shows the usage of wavelet algorithms.Wavelet Decomposition(WD)algorithm has been combined with various traditional forecasting time-series models,such as Least Square Support Vector Machine(LSSVM),Artificial Neural Network(ANN)and Multivariate Adaptive Regression Splines(MARS)and their effects are examined in terms of the statistical estimations.The WD has been used as a mathematical application in traditional forecast modelling to collect periodically measured parameters,which has yielded tremendous constructive outcomes.Further,it is observed that the wavelet combined models are classy compared to the various time series models in terms of performance basis.Therefore,combining wavelet forecasting models has yielded much better results.展开更多
Orbital angular momentum(OAM)technology,refers to Laguerre-Gaussian(LG)beams,twisted beams,vector/vortex beams,acoustic vortex beams and fractional vortex beams.It is an emerging and promising technology to improve th...Orbital angular momentum(OAM)technology,refers to Laguerre-Gaussian(LG)beams,twisted beams,vector/vortex beams,acoustic vortex beams and fractional vortex beams.It is an emerging and promising technology to improve the communication capacity,spectral efficiency,and anti-jamming capability due to its helical phase fronts and infinite orthogonal states.Although the OAM research began in the 1990s,the developing trends,current status,issues and characteristics through a systematic observation have not yet been performed.This paper presents a knowledge-based evolution of OAM research published in the Web of Science(WoS)from 2011 to 2021 using bibliometric analysis in Citepspace.The results demonstrate that the bandwidth,efficiency,gain,divergence,phase quantization,bulky and complex feeding structures,misalignment,distortion,interferences atmospheric turbulence and diffraction were the key issues found in the OAM technology.The main research hotspots and categories,influential authors,leading journals,best institutions of OAM show a strong bias in favor of their functions and technology developments.The research on OAM was mainly performed by the counties that have developed the 5G and now moving towards 6G communications like China,USA and South Korea.This study would serve as an inclusive guide on the future research trends and status especially for the OAM researchers.展开更多
Derailment of trains is not unusual all around the world,especially in developing countries,due to unidentified track or rolling stock faults that cause massive casualties each year.For this purpose,a proper condition...Derailment of trains is not unusual all around the world,especially in developing countries,due to unidentified track or rolling stock faults that cause massive casualties each year.For this purpose,a proper condition monitoring system is essential to avoid accidents and heavy losses.Generally,the detection and classification of railway track surface faults in real-time requires massive computational processing and memory resources and is prone to a noisy environment.Therefore,in this paper,we present the development of a novel embedded system prototype for condition monitoring of railway track.The proposed prototype system works in real-time by acquiring railway track surface images and performing two tasks a)detect deformation(i.e.,faults)like squats,shelling,and spalling using the contour feature algorithm and b)the vibration signature on that faulty spot by synchronizing acceleration and image data.A new illumination scheme is also proposed to avoid the sunlight reflection that badly affects the image acquisition process.The contour detection algorithm is applied here to detect the uneven shapes and discontinuities in the geometrical structure of the railway track surface,which ultimately detects unhealthy regions.It works by converting Red,Green,and Blue(RGB)images into binary images,which distinguishes the unhealthy regions by making them white color while the healthy regions in black color.We have used the multiprocessing technique to overcome the massive processing and memory issues.This embedded system is developed on Raspberry Pi by interfacing a vision camera,an accelerometer,a proximity sensor,and a Global Positioning System(GPS)sensors(i.e.,multi-sensors).The developed embedded system prototype is tested in real-time onsite by installing it on a Railway Inspection Trolley(RIT),which runs at an average speed of 15 km/h.The functional verification of the proposed system is done successfully by detecting and recording the various railway track surface faults.An unhealthy frame’s onsite detection processing time was recorded at approximately 25.6ms.The proposed system can synchronize the acceleration data on specific railway track deformation.The proposed novel embedded system may be beneficial for detecting faults to overcome the conventional manual railway track condition monitoring,which is still being practiced in various developing or underdeveloped countries.展开更多
Owing to the 4.0 industrial revolution condition monitoring maintenance is widely accepted as a useful approach to avoiding plant disturbances and shutdown.Recently,Motor Current Signature Analysis(MCSA)is widely repo...Owing to the 4.0 industrial revolution condition monitoring maintenance is widely accepted as a useful approach to avoiding plant disturbances and shutdown.Recently,Motor Current Signature Analysis(MCSA)is widely reported as a condition monitoring technique in the detection and identification of individual andmultiple Induction Motor(IM)faults.However,checking the fault detection and classification with deep learning models and its comparison among them selves or conventional approaches is rarely reported in the literature.Therefore,in this work,wepresent the detection and identification of induction motor faults with MCSA and three Deep Learning(DL)models namely MLP,LSTM,and 1D-CNN.Initially,we have developed the model of Squirrel Cage induction motor in MATLAB and simulated it for single phasing and stator winding faults(SWF)using Fast Fourier Transform(FFT),Short Time Fourier Transform(STFT),and Continuous Wavelet Transform(CWT)to detect and identify the healthy and unhealthy conditions with phase to ground,single phasing and in multiple fault conditions using Motor Current Signature Analysis.The faults impact on stator current is presented in the time and frequency domain(i.e.,power spectrum).The simulation results show that the scalogram has shown good results in time-frequency analysis for fault and showing its impact on the energy of current during individual fault and multiple fault conditions.This is further investigated with three deep learning models(i.e.,MLP,LSTM,and 1D-CNN)for checking the fault detection and identification(i.e.,classification)improvement in a three-phase induction motor.By simulating the three-phase induction motor in various healthy and unhealthy conditions in MATLAB,we have collected current signature data in the time domain,labeled them accordingly and created the 50 thousand samples dataset for DL models.All the DL models are trained and validated with a suitable number of architecture layers.By simulation,the multiclass confusion matrix,precision,recall,and F1-score are obtained in several conditions.The result shows that the stator current signature of the motor can be used to detect individual and multiple faults.Moreover,deep learning models can efficiently classify the induction motor faults based on time-domain data of the stator current signature.In deep learning(DL)models,the LSTM has shown better accuracy among all other three models.These results show that employing deep learning in fault detection and identification of induction motors can be very useful in predictive maintenance to avoid shutdown and production cycle stoppage in the industry.展开更多
The Power Quality (PQ), security, reliability etc., are the prime objectives of the power system. The protection is developed in such a way that it should be selective, fast, reliable and the cost effective. The study...The Power Quality (PQ), security, reliability etc., are the prime objectives of the power system. The protection is developed in such a way that it should be selective, fast, reliable and the cost effective. The study about the islanding protection in Low Voltage (LV) CIGRE distribution and networks like this has been proposed in this paper. This is achieved by developing the protection against the short circuit faults which might appear at the Medium Voltage (MV) bus. The protection of the network with significant penetration of the Distributed Generations (DGs) is a complicated process. The DG units which are directly connected to the grid such as synchronous or induction generators contribute large short power, whereas the DG units which are connected to the grid via inverters carry small amount of the short circuit power. This creates the problems in the protection of the network. If the proper protection coordination measures have not been taken, it might cause the mal-function of the protection devices which put the portion of the power network into the security threats. The selection of the islanding protection devices in this paper is made to protect the network against bi-directional currents at the time of short circuit fault. The LV CIGRE distribution network will enter into islanding if a fault is cleared at the MV bus by the proposed islanding protection devices. It is therefore, essential to detect the islanding in the CIGRE power network. The detection of the island in this network is another major objective of this paper. The detection of the island is proposed by using the technique which is based on the voltage phase angle difference. The simulations are carried out by using DIgSILENT power factory software version 15.0.展开更多
Since the worldwide spread of internet-connected devices and rapid advances made in Internet of Things(IoT)systems,much research has been done in using machine learning methods to recognize IoT sensors data.This is pa...Since the worldwide spread of internet-connected devices and rapid advances made in Internet of Things(IoT)systems,much research has been done in using machine learning methods to recognize IoT sensors data.This is particularly the case for optical character recognition of handwritten scripts.Recognizing text in images has several useful applications,including content-based image retrieval,searching and document archiving.The Arabic language is one of the mostly used tongues in the world.However,Arabic text recognition in imagery is still very much in the nascent stage,especially handwritten text.This is mainly due to the language complexities,different writing styles,variations in the shape of characters,diacritics,and connected nature of Arabic text.In this paper,two deep learning models were proposed.The first model was based on a sequence-to-sequence recognition,while the second model was based on a fully convolution network.To measure the performance of these models,a new dataset,called QTID(Quran Text Image Dataset)was devised.This is the first Arabic dataset that includes Arabic diacritics.It consists of 309,720 different 192×64 annotated Arabic word images,which comprise 2,494,428 characters in total taken from the Holy Quran.The annotated images in the dataset were randomly divided into 90%,5%,and 5%sets for training,validation,and testing purposes,respectively.Both models were set up to recognize the Arabic Othmani font in the QTID.Experimental results show that the proposed methods achieve state-of-the-art outcomes.Furthermore,the proposed models surpass expectations in terms of character recognition rate,F1-score,average precision,and recall values.They are superior to the best Arabic text recognition engines like Tesseract and ABBYY FineReader.展开更多
Surveillance cameras have been widely used for monitoring in both private and public sectors as a security measure.Close Circuits Television(CCTV)Cameras are used to surveillance and monitor the normal and anomalous i...Surveillance cameras have been widely used for monitoring in both private and public sectors as a security measure.Close Circuits Television(CCTV)Cameras are used to surveillance and monitor the normal and anomalous incidents.Real-world anomaly detection is a significant challenge due to its complex and diverse nature.It is difficult to manually analyze because vast amounts of video data have been generated through surveillance systems,and the need for automated techniques has been raised to enhance detection accuracy.This paper proposes a novel deep-stacked ensemble model integrated with a data augmentation approach called Stack Ensemble Road Anomaly Detection(SERAD).SERAD is used to detect and classify the four most happening road anomalies,such as accidents,car fires,fighting,and snatching,through road surveillance videos with high accuracy.The SERAD adapted three pre-trained Convolutional Neural Networks(CNNs)models,namely VGG19,ResNet50 and InceptionV3.The stacking technique is employed to incorporate these three models,resulting in much-improved accuracy for classifying road abnormalities compared to individual models.Additionally,it presented a custom real-world Road Anomaly Dataset(RAD)comprising a comprehensive collection of road images and videos.The experimental results demonstrate the strength and reliability of the proposed SERAD model,achieving an impressive classification accuracy of 98.7%.The results indicate that the proposed SERAD model outperforms than the individual CNN base models.展开更多
The development of multimedia content has resulted in a massiveincrease in network traffic for video streaming. It demands such types ofsolutions that can be addressed to obtain the user’s Quality-of-Experience(QoE)....The development of multimedia content has resulted in a massiveincrease in network traffic for video streaming. It demands such types ofsolutions that can be addressed to obtain the user’s Quality-of-Experience(QoE). 360-degree videos have already taken up the user’s behavior by storm.However, the users only focus on the part of 360-degree videos, known as aviewport. Despite the immense hype, 360-degree videos convey a loathsomeside effect about viewport prediction, making viewers feel uncomfortablebecause user viewport needs to be pre-fetched in advance. Ideally, we canminimize the bandwidth consumption if we know what the user motionin advance. Looking into the problem definition, we propose an EncoderDecoder based Long-Short Term Memory (LSTM) model to more accuratelycapture the non-linear relationship between past and future viewport positions. This model takes the transforming data instead of taking the direct inputto predict the future user movement. Then, this prediction model is combinedwith a rate adaptation approach that assigns the bitrates to various tiles for360-degree video frames under a given network capacity. Hence, our proposedwork aims to facilitate improved system performance when QoE parametersare jointly optimized. Some experiments were carried out and compared withexisting work to prove the performance of the proposed model. Last but notleast, the experiments implementation of our proposed work provides highuser’s QoE than its competitors.展开更多
Electroencephalogram(EEG)is a method of capturing the electrophy-siological signal of the brain.An EEG headset is a wearable device that records electrophysiological data from the brain.This paper presents the design ...Electroencephalogram(EEG)is a method of capturing the electrophy-siological signal of the brain.An EEG headset is a wearable device that records electrophysiological data from the brain.This paper presents the design and fab-rication of a customized low-cost Electroencephalogram(EEG)headset based on the open-source OpenBCI Ultracortex Mark IV system.The electrode placement locations are modified under a 10–20 standard system.The fabricated headset is then compared to commercially available headsets based on the following para-meters:affordability,accessibility,noise,signal quality,and cost.First,the data is recorded from 20 subjects who used the EEG Headset,and signals were recorded.Secondly,the participants marked the accuracy,set up time,participant comfort,and participant perceived ease of set-up on a scale of 1 to 7(7 being excellent).Thirdly,the self-designed EEG headband is used by 5 participants for slide changing.The raw EEG signal is decomposed into a series of band sig-nals using discrete wavelet transform(DWT).Lastly,thesefindings have been compared to previously reported studies.We concluded that when used for slide-changing control,our self-designed EEG headband had an accuracy of 82.0 percent.We also concluded from the results that our headset performed well on the cost-effectiveness scale,had a reduced setup time of 2±0.5 min(the short-est among all being compared),and demonstrated greater ease of use.展开更多
Very high concentration of flexural, shear and torsional stresses occurs at the wall-slab junctions in a laterally loaded tall building consisting of planar walls and coupling slabs. Due to this concentration of stres...Very high concentration of flexural, shear and torsional stresses occurs at the wall-slab junctions in a laterally loaded tall building consisting of planar walls and coupling slabs. Due to this concentration of stresses and their interaction, there are great chances of failure to occur at the junction. Also the flexural stresses are not uniformly distributed and have the highest intensity near the periphery of inner walls but are reduced drastically as we move away from the wall-slab junction. Numerous attempts have been made to strengthen the wall-slab junction by using various types of shear reinforcement to ensure that shear failure should not occur. Various methods including fibre reinforcement consisting of twins of twisted steel couplets have already been used. This paper describes a new method of placing 2 inch wide flange I-sections at appropriate locations to improve the shear strength of the wall-slab junctions. Based on systematic research, a new procedure has also been developed to assess the strength of wall-slab junction using the new reinforcement method. Test results showed that a substantial increase, up to 57%, in the shear strength of specimens was obtained by using the new method of shear reinforcement in a laterally loaded tall building.展开更多
Due to high cost of aggregates, cement and steel in plain regions of Pakistan, low income people are unable to get their houses constructed using Reinforced Cement Concrete (RCC). In this study, potential of baked cla...Due to high cost of aggregates, cement and steel in plain regions of Pakistan, low income people are unable to get their houses constructed using Reinforced Cement Concrete (RCC). In this study, potential of baked clay as an economical material of building construction is investigated in order to replace normal concrete. For this purpose, compressive strength and tensile strength of baked clay fired at 1000℃ were determined. The results show that the compressive strength and tensile strength of baked clay are about 65%, and 80% more than those of corresponding values of normal concrete, respectively. This implies that by utilizing reinforced baked clay instead of RCC, saving of cement aggregates and reinforcing steel could be achieved.展开更多
This paper presents behaviour of Reinforced Baked Clay (RBC) beams under drop weight impact loading. The beams were made of two different grades of baked clay with cube crushing strength of 20 MPa and 30 MPa, respecti...This paper presents behaviour of Reinforced Baked Clay (RBC) beams under drop weight impact loading. The beams were made of two different grades of baked clay with cube crushing strength of 20 MPa and 30 MPa, respectively. The RBC beams were subjected to repeated drop weight loading by a hammer of weight equal to that of the specimen being tested. The results showed that the impact resistance of the RBC beams was governed by the compressive strength of the baked clay. Failure of grade 20 beams occurred due to irregular cracks and the beams of grade 30 failed by opening of a single crack at mid span. It was observed that the beams of grade 30 had sustained about 1.5 times more number of impacts until steel in tension zone yielded and failed completely after necking.展开更多
Coal is used as a traditional fuel for firing of clay bricks in kilns. The cost of coal is high and is increasing continuously. This paper describes the effect of alternate fuels on compressive strength, water absorpt...Coal is used as a traditional fuel for firing of clay bricks in kilns. The cost of coal is high and is increasing continuously. This paper describes the effect of alternate fuels on compressive strength, water absorption and density of fired clay bricks. The alternate fuels used in this study were 1) rapeseed husk (Type I), 2) combination of sugarcane-bagasse, rice husk and used clothes (Type II) and 3) coal (Type III). The results show that compressive strength of bricks fired using Type I and Type II fuels was decreased to 11% and 7%, respectively, compared to those fired with coal. However, the values of water absorption and density of bricks fired with Type I and Type II fuels were almost same as exhibited by those baked with coal. This study shows that a saving of 25%, and 18% could be achieved when the bricks were fired using Type I and Type II fuels, respectively, compared to those fired with coal.展开更多
For low cost houses in Pakistan, Reinforced Baked Clay (RBC) is considered to be a potential construction material as a substitute of Reinforced Cement Concrete (RCC). Deflection and cracks are important parameters fo...For low cost houses in Pakistan, Reinforced Baked Clay (RBC) is considered to be a potential construction material as a substitute of Reinforced Cement Concrete (RCC). Deflection and cracks are important parameters for design of beams in a building. However, for RBC beams it is still unknown that how the deflection and crack width could be controlled by increasing ratio of reinforcement. This study investigates the effect of ratio of reinforcement on deflection and cracking behaviour of baked clay beams. The results show that by increasing area of reinforcement by 50% in baked clay beams: 1) deflection was decreased to 2.5 times, and 2) crack width was reduced to three times.展开更多
Construction of Reinforced Cement Concrete (RCC) houses is unaffordable for low income people living in plains of Pakistan because of high cost of cement and aggregates. In such regions, use of Reinforced Baked Clay (...Construction of Reinforced Cement Concrete (RCC) houses is unaffordable for low income people living in plains of Pakistan because of high cost of cement and aggregates. In such regions, use of Reinforced Baked Clay (RBC) is considered to be a cheaper alternative for RCC. This paper presents structural behaviour of RBC beams. The results of RBC beams were compared with a control RCC beam of same size and reinforcement. Both types of the beams showed similar load deflection behaviour in pre-yield stage. Whereas, in post yield stage, the RBC beams showed comparatively more deflection as compared to the RCC beam. The ultimate load carrying capacity of the RBC beams was almost similar to that of the RCC beam. This study suggests that the RBC beams can be used economically instead of RCC beams without losing strength and safety of a building.展开更多
Some disadvantages associated with conventional brick masonry are: high cost of construction, lower compressive strength and less durability. In order to resolve these problems, a new technique of constructing walls u...Some disadvantages associated with conventional brick masonry are: high cost of construction, lower compressive strength and less durability. In order to resolve these problems, a new technique of constructing walls using large size baked clay blocks is introduced. For this purpose, clay blocks of size 150 mm × 300 mm × 1980 mm were cast at a pressure of 6 MPa, and fired at a temperature of 700℃. In this paper, compressive strength and tensile strength of baked clay were investigated in order to find its suitability as a walling material for low cost houses. Cubes of 150 mm sides were tested in compression and the beams were tested in flexure. The results showed that compressive strength of baked clay cubes was found to be 10 MPa and tensile strength, in terms of modulus of rupture, was found to be 2.3 MPa. Since the baked clay blocks are larger in size than traditional bricks, it is inferred that the blocks could be used as a cheaper and stronger walling material.展开更多
Attempts are being made to utilize Reinforced Baked Clay (RBC) as a substitute of Reinforced Cement Concrete (RCC) for construction of low cost houses in plains of Pakistan. Since baked clay is considered to be more b...Attempts are being made to utilize Reinforced Baked Clay (RBC) as a substitute of Reinforced Cement Concrete (RCC) for construction of low cost houses in plains of Pakistan. Since baked clay is considered to be more brittle as compared to concrete. Therefore, it is necessary to investigate how deflection and crack width of RBC beams subjected to impact loading are governed by amount of reinforcement. This paper presents the behaviour of RBC beams under drop weight impact loading. The beams were reinforced with two steel bars, one in compression zone and the other in tension zone. In group A beams, the diameter of steel bars was 12.7 mm, while the beams of group B were reinforced with steel bars of 15.8 mm diameter. The RBC beams were subjected to repeated impacts of a hammer of mass 21 kg falling from a height of 1000 mm. The results show that 1) three times reduction in deflection, and 2) 2.5 times decrease in crack width, were achieved in RBC beams by increasing the area of steel to 50%. In addition to this, all the RBC beams failed within nine blows of the hammer, irrespective of area of reinforcement.展开更多
Reinforced Baked Clay (RBC) seems to be potential alternative of Reinforced Cement Concrete (RCC) for construction of low cost houses. In order to utilize RBC as a construction material for buildings, it is necessary ...Reinforced Baked Clay (RBC) seems to be potential alternative of Reinforced Cement Concrete (RCC) for construction of low cost houses. In order to utilize RBC as a construction material for buildings, it is necessary to understand compression behaviour of baked clay. In this paper, relation between cube crushing strength and cylinder strength of baked clay is presented. For this purpose, clay beams were cast in a mould and compacted at a pressure of 6 MPa. The clay beams were dried and fired in a kiln at a temperature of 900?C. Cubes of 150 mm size were sawed from a baked clay beam. Cylinders of 150 mm diameter and 300 mm height were cut, from another baked clay beam, using core cutter machine. Both the cubes and cylinders were tested for compressive strength in Universal Testing Machine. The results showed that the cube crushing strength of baked clay was 25 MPa and the ratio of the compressive strength of the cylinders and the cubes was found to be 0.6. Suggestions for improvement of compressive strength of baked clay cylinders are also discussed.展开更多
文摘Communication skills are the most important skills that students need in their academic as well as professional fields.Students,especially those in the English department,may be involved in various activities such as presentations,group discussions,and debates,and soon they need to master communication skills to effectively perform these tasks.This study aims to investigate the communication skills of the third-year students of the English department at Quaid e Awam University Nawabshah.Here,four communication skills,namely reading skills,speaking skills,listening skills,and writing skills,are analyzed using descriptive statistics through an online 4-point Likert scale questionnaire.Data were collected from 34 respondents,based on four dimensions:reading skills,listening skills,writing skills,and speaking skills.The site of the study was Quaid-e-Awam University of Engineering,Science and Technology,Nawabshah.The findings of the study reveal insightful outcomes.Based on the outcomes of the study,it is suggested that the study can be replicated in the context of schools which the acquisition of these four skills is mandatory for high academic achievements.
基金supported by the National Natural Science Foundation of China(No.51978384)Tai Shan Scholar Foundation(No.ts20151003)
文摘This study aimed to fabricate new and effective material for the efficiency of phosphate adsorption.Two types of adsorbent materials,the zirconium hydroxides embedded in pomegranate peel(Zr/Peel)and zirconium-lanthanum hydroxides embedded in pomegranate peel(Zr-La/Peel)were developed.Scanning electronic microscopy(SEM),x-ray photoelectron spectroscopy(XPS)and x-ray diffraction(XRD)were evaluated to give insight into the physicochemical properties of these adsorbents.Zr-La/Peel exceeded the adsorption efficiency of Zr/Peel adsorbents in batch adsorption experiments at the same pH level.The peel as a host can strive to have a strong"shielding effect"to increase the steadiness of the entrenched Zr and La elements.La and Zr are hydroxide metals that emit many hydrogen ions during the hydrolysis reaction,which contribute to protonation and electrostatic attraction.The highest adsorption capacity of La-Zr/Peel for phosphate was calculated to be40.21 mg/g,and pseudo second-order equation is very well fitted for kinetic adsorption.Phosphate adsorption efficiency was reduced by an increase of pH.With the background of coexisting Cl-,little effect on adsorption efficiency was observed,while adsorption capacities were reduced by almost 20-30%with the coexistence of SO42-,NO3-and humic acid(HA).
文摘This investigative study is focused on the impact of wavelet on traditional forecasting time-series models,which significantly shows the usage of wavelet algorithms.Wavelet Decomposition(WD)algorithm has been combined with various traditional forecasting time-series models,such as Least Square Support Vector Machine(LSSVM),Artificial Neural Network(ANN)and Multivariate Adaptive Regression Splines(MARS)and their effects are examined in terms of the statistical estimations.The WD has been used as a mathematical application in traditional forecast modelling to collect periodically measured parameters,which has yielded tremendous constructive outcomes.Further,it is observed that the wavelet combined models are classy compared to the various time series models in terms of performance basis.Therefore,combining wavelet forecasting models has yielded much better results.
基金supported by the project of 61971051 from the National Natural Science Foundation of China (NSFC)。
文摘Orbital angular momentum(OAM)technology,refers to Laguerre-Gaussian(LG)beams,twisted beams,vector/vortex beams,acoustic vortex beams and fractional vortex beams.It is an emerging and promising technology to improve the communication capacity,spectral efficiency,and anti-jamming capability due to its helical phase fronts and infinite orthogonal states.Although the OAM research began in the 1990s,the developing trends,current status,issues and characteristics through a systematic observation have not yet been performed.This paper presents a knowledge-based evolution of OAM research published in the Web of Science(WoS)from 2011 to 2021 using bibliometric analysis in Citepspace.The results demonstrate that the bandwidth,efficiency,gain,divergence,phase quantization,bulky and complex feeding structures,misalignment,distortion,interferences atmospheric turbulence and diffraction were the key issues found in the OAM technology.The main research hotspots and categories,influential authors,leading journals,best institutions of OAM show a strong bias in favor of their functions and technology developments.The research on OAM was mainly performed by the counties that have developed the 5G and now moving towards 6G communications like China,USA and South Korea.This study would serve as an inclusive guide on the future research trends and status especially for the OAM researchers.
基金supported by the NCRA project of the Higher Education Commission Pakistan.
文摘Derailment of trains is not unusual all around the world,especially in developing countries,due to unidentified track or rolling stock faults that cause massive casualties each year.For this purpose,a proper condition monitoring system is essential to avoid accidents and heavy losses.Generally,the detection and classification of railway track surface faults in real-time requires massive computational processing and memory resources and is prone to a noisy environment.Therefore,in this paper,we present the development of a novel embedded system prototype for condition monitoring of railway track.The proposed prototype system works in real-time by acquiring railway track surface images and performing two tasks a)detect deformation(i.e.,faults)like squats,shelling,and spalling using the contour feature algorithm and b)the vibration signature on that faulty spot by synchronizing acceleration and image data.A new illumination scheme is also proposed to avoid the sunlight reflection that badly affects the image acquisition process.The contour detection algorithm is applied here to detect the uneven shapes and discontinuities in the geometrical structure of the railway track surface,which ultimately detects unhealthy regions.It works by converting Red,Green,and Blue(RGB)images into binary images,which distinguishes the unhealthy regions by making them white color while the healthy regions in black color.We have used the multiprocessing technique to overcome the massive processing and memory issues.This embedded system is developed on Raspberry Pi by interfacing a vision camera,an accelerometer,a proximity sensor,and a Global Positioning System(GPS)sensors(i.e.,multi-sensors).The developed embedded system prototype is tested in real-time onsite by installing it on a Railway Inspection Trolley(RIT),which runs at an average speed of 15 km/h.The functional verification of the proposed system is done successfully by detecting and recording the various railway track surface faults.An unhealthy frame’s onsite detection processing time was recorded at approximately 25.6ms.The proposed system can synchronize the acceleration data on specific railway track deformation.The proposed novel embedded system may be beneficial for detecting faults to overcome the conventional manual railway track condition monitoring,which is still being practiced in various developing or underdeveloped countries.
基金the support of the‘Haptics,Human Robotics,and Condition Monitoring Lab’Established in Mehran University of Engineering and Technology,Jamshoro,under the umbrella of the National Centre of Robotics and Automation.
文摘Owing to the 4.0 industrial revolution condition monitoring maintenance is widely accepted as a useful approach to avoiding plant disturbances and shutdown.Recently,Motor Current Signature Analysis(MCSA)is widely reported as a condition monitoring technique in the detection and identification of individual andmultiple Induction Motor(IM)faults.However,checking the fault detection and classification with deep learning models and its comparison among them selves or conventional approaches is rarely reported in the literature.Therefore,in this work,wepresent the detection and identification of induction motor faults with MCSA and three Deep Learning(DL)models namely MLP,LSTM,and 1D-CNN.Initially,we have developed the model of Squirrel Cage induction motor in MATLAB and simulated it for single phasing and stator winding faults(SWF)using Fast Fourier Transform(FFT),Short Time Fourier Transform(STFT),and Continuous Wavelet Transform(CWT)to detect and identify the healthy and unhealthy conditions with phase to ground,single phasing and in multiple fault conditions using Motor Current Signature Analysis.The faults impact on stator current is presented in the time and frequency domain(i.e.,power spectrum).The simulation results show that the scalogram has shown good results in time-frequency analysis for fault and showing its impact on the energy of current during individual fault and multiple fault conditions.This is further investigated with three deep learning models(i.e.,MLP,LSTM,and 1D-CNN)for checking the fault detection and identification(i.e.,classification)improvement in a three-phase induction motor.By simulating the three-phase induction motor in various healthy and unhealthy conditions in MATLAB,we have collected current signature data in the time domain,labeled them accordingly and created the 50 thousand samples dataset for DL models.All the DL models are trained and validated with a suitable number of architecture layers.By simulation,the multiclass confusion matrix,precision,recall,and F1-score are obtained in several conditions.The result shows that the stator current signature of the motor can be used to detect individual and multiple faults.Moreover,deep learning models can efficiently classify the induction motor faults based on time-domain data of the stator current signature.In deep learning(DL)models,the LSTM has shown better accuracy among all other three models.These results show that employing deep learning in fault detection and identification of induction motors can be very useful in predictive maintenance to avoid shutdown and production cycle stoppage in the industry.
文摘The Power Quality (PQ), security, reliability etc., are the prime objectives of the power system. The protection is developed in such a way that it should be selective, fast, reliable and the cost effective. The study about the islanding protection in Low Voltage (LV) CIGRE distribution and networks like this has been proposed in this paper. This is achieved by developing the protection against the short circuit faults which might appear at the Medium Voltage (MV) bus. The protection of the network with significant penetration of the Distributed Generations (DGs) is a complicated process. The DG units which are directly connected to the grid such as synchronous or induction generators contribute large short power, whereas the DG units which are connected to the grid via inverters carry small amount of the short circuit power. This creates the problems in the protection of the network. If the proper protection coordination measures have not been taken, it might cause the mal-function of the protection devices which put the portion of the power network into the security threats. The selection of the islanding protection devices in this paper is made to protect the network against bi-directional currents at the time of short circuit fault. The LV CIGRE distribution network will enter into islanding if a fault is cleared at the MV bus by the proposed islanding protection devices. It is therefore, essential to detect the islanding in the CIGRE power network. The detection of the island in this network is another major objective of this paper. The detection of the island is proposed by using the technique which is based on the voltage phase angle difference. The simulations are carried out by using DIgSILENT power factory software version 15.0.
基金funded by the Australian Research Data Common(ARDC),project code—RG192500 that will be used for paying the APC of this manuscript.
文摘Since the worldwide spread of internet-connected devices and rapid advances made in Internet of Things(IoT)systems,much research has been done in using machine learning methods to recognize IoT sensors data.This is particularly the case for optical character recognition of handwritten scripts.Recognizing text in images has several useful applications,including content-based image retrieval,searching and document archiving.The Arabic language is one of the mostly used tongues in the world.However,Arabic text recognition in imagery is still very much in the nascent stage,especially handwritten text.This is mainly due to the language complexities,different writing styles,variations in the shape of characters,diacritics,and connected nature of Arabic text.In this paper,two deep learning models were proposed.The first model was based on a sequence-to-sequence recognition,while the second model was based on a fully convolution network.To measure the performance of these models,a new dataset,called QTID(Quran Text Image Dataset)was devised.This is the first Arabic dataset that includes Arabic diacritics.It consists of 309,720 different 192×64 annotated Arabic word images,which comprise 2,494,428 characters in total taken from the Holy Quran.The annotated images in the dataset were randomly divided into 90%,5%,and 5%sets for training,validation,and testing purposes,respectively.Both models were set up to recognize the Arabic Othmani font in the QTID.Experimental results show that the proposed methods achieve state-of-the-art outcomes.Furthermore,the proposed models surpass expectations in terms of character recognition rate,F1-score,average precision,and recall values.They are superior to the best Arabic text recognition engines like Tesseract and ABBYY FineReader.
基金funded by the King Saud University,Riyadh,Saudi Arabia for funding this work through Researchers Supporting Project Number-RSPD2024R893.
文摘Surveillance cameras have been widely used for monitoring in both private and public sectors as a security measure.Close Circuits Television(CCTV)Cameras are used to surveillance and monitor the normal and anomalous incidents.Real-world anomaly detection is a significant challenge due to its complex and diverse nature.It is difficult to manually analyze because vast amounts of video data have been generated through surveillance systems,and the need for automated techniques has been raised to enhance detection accuracy.This paper proposes a novel deep-stacked ensemble model integrated with a data augmentation approach called Stack Ensemble Road Anomaly Detection(SERAD).SERAD is used to detect and classify the four most happening road anomalies,such as accidents,car fires,fighting,and snatching,through road surveillance videos with high accuracy.The SERAD adapted three pre-trained Convolutional Neural Networks(CNNs)models,namely VGG19,ResNet50 and InceptionV3.The stacking technique is employed to incorporate these three models,resulting in much-improved accuracy for classifying road abnormalities compared to individual models.Additionally,it presented a custom real-world Road Anomaly Dataset(RAD)comprising a comprehensive collection of road images and videos.The experimental results demonstrate the strength and reliability of the proposed SERAD model,achieving an impressive classification accuracy of 98.7%.The results indicate that the proposed SERAD model outperforms than the individual CNN base models.
文摘The development of multimedia content has resulted in a massiveincrease in network traffic for video streaming. It demands such types ofsolutions that can be addressed to obtain the user’s Quality-of-Experience(QoE). 360-degree videos have already taken up the user’s behavior by storm.However, the users only focus on the part of 360-degree videos, known as aviewport. Despite the immense hype, 360-degree videos convey a loathsomeside effect about viewport prediction, making viewers feel uncomfortablebecause user viewport needs to be pre-fetched in advance. Ideally, we canminimize the bandwidth consumption if we know what the user motionin advance. Looking into the problem definition, we propose an EncoderDecoder based Long-Short Term Memory (LSTM) model to more accuratelycapture the non-linear relationship between past and future viewport positions. This model takes the transforming data instead of taking the direct inputto predict the future user movement. Then, this prediction model is combinedwith a rate adaptation approach that assigns the bitrates to various tiles for360-degree video frames under a given network capacity. Hence, our proposedwork aims to facilitate improved system performance when QoE parametersare jointly optimized. Some experiments were carried out and compared withexisting work to prove the performance of the proposed model. Last but notleast, the experiments implementation of our proposed work provides highuser’s QoE than its competitors.
基金funded this work(DSR),King Abdulaziz University,Jeddah,Saudi Arabia,under grant no.(RG-18-130-43).
文摘Electroencephalogram(EEG)is a method of capturing the electrophy-siological signal of the brain.An EEG headset is a wearable device that records electrophysiological data from the brain.This paper presents the design and fab-rication of a customized low-cost Electroencephalogram(EEG)headset based on the open-source OpenBCI Ultracortex Mark IV system.The electrode placement locations are modified under a 10–20 standard system.The fabricated headset is then compared to commercially available headsets based on the following para-meters:affordability,accessibility,noise,signal quality,and cost.First,the data is recorded from 20 subjects who used the EEG Headset,and signals were recorded.Secondly,the participants marked the accuracy,set up time,participant comfort,and participant perceived ease of set-up on a scale of 1 to 7(7 being excellent).Thirdly,the self-designed EEG headband is used by 5 participants for slide changing.The raw EEG signal is decomposed into a series of band sig-nals using discrete wavelet transform(DWT).Lastly,thesefindings have been compared to previously reported studies.We concluded that when used for slide-changing control,our self-designed EEG headband had an accuracy of 82.0 percent.We also concluded from the results that our headset performed well on the cost-effectiveness scale,had a reduced setup time of 2±0.5 min(the short-est among all being compared),and demonstrated greater ease of use.
文摘Very high concentration of flexural, shear and torsional stresses occurs at the wall-slab junctions in a laterally loaded tall building consisting of planar walls and coupling slabs. Due to this concentration of stresses and their interaction, there are great chances of failure to occur at the junction. Also the flexural stresses are not uniformly distributed and have the highest intensity near the periphery of inner walls but are reduced drastically as we move away from the wall-slab junction. Numerous attempts have been made to strengthen the wall-slab junction by using various types of shear reinforcement to ensure that shear failure should not occur. Various methods including fibre reinforcement consisting of twins of twisted steel couplets have already been used. This paper describes a new method of placing 2 inch wide flange I-sections at appropriate locations to improve the shear strength of the wall-slab junctions. Based on systematic research, a new procedure has also been developed to assess the strength of wall-slab junction using the new reinforcement method. Test results showed that a substantial increase, up to 57%, in the shear strength of specimens was obtained by using the new method of shear reinforcement in a laterally loaded tall building.
文摘Due to high cost of aggregates, cement and steel in plain regions of Pakistan, low income people are unable to get their houses constructed using Reinforced Cement Concrete (RCC). In this study, potential of baked clay as an economical material of building construction is investigated in order to replace normal concrete. For this purpose, compressive strength and tensile strength of baked clay fired at 1000℃ were determined. The results show that the compressive strength and tensile strength of baked clay are about 65%, and 80% more than those of corresponding values of normal concrete, respectively. This implies that by utilizing reinforced baked clay instead of RCC, saving of cement aggregates and reinforcing steel could be achieved.
文摘This paper presents behaviour of Reinforced Baked Clay (RBC) beams under drop weight impact loading. The beams were made of two different grades of baked clay with cube crushing strength of 20 MPa and 30 MPa, respectively. The RBC beams were subjected to repeated drop weight loading by a hammer of weight equal to that of the specimen being tested. The results showed that the impact resistance of the RBC beams was governed by the compressive strength of the baked clay. Failure of grade 20 beams occurred due to irregular cracks and the beams of grade 30 failed by opening of a single crack at mid span. It was observed that the beams of grade 30 had sustained about 1.5 times more number of impacts until steel in tension zone yielded and failed completely after necking.
文摘Coal is used as a traditional fuel for firing of clay bricks in kilns. The cost of coal is high and is increasing continuously. This paper describes the effect of alternate fuels on compressive strength, water absorption and density of fired clay bricks. The alternate fuels used in this study were 1) rapeseed husk (Type I), 2) combination of sugarcane-bagasse, rice husk and used clothes (Type II) and 3) coal (Type III). The results show that compressive strength of bricks fired using Type I and Type II fuels was decreased to 11% and 7%, respectively, compared to those fired with coal. However, the values of water absorption and density of bricks fired with Type I and Type II fuels were almost same as exhibited by those baked with coal. This study shows that a saving of 25%, and 18% could be achieved when the bricks were fired using Type I and Type II fuels, respectively, compared to those fired with coal.
文摘For low cost houses in Pakistan, Reinforced Baked Clay (RBC) is considered to be a potential construction material as a substitute of Reinforced Cement Concrete (RCC). Deflection and cracks are important parameters for design of beams in a building. However, for RBC beams it is still unknown that how the deflection and crack width could be controlled by increasing ratio of reinforcement. This study investigates the effect of ratio of reinforcement on deflection and cracking behaviour of baked clay beams. The results show that by increasing area of reinforcement by 50% in baked clay beams: 1) deflection was decreased to 2.5 times, and 2) crack width was reduced to three times.
文摘Construction of Reinforced Cement Concrete (RCC) houses is unaffordable for low income people living in plains of Pakistan because of high cost of cement and aggregates. In such regions, use of Reinforced Baked Clay (RBC) is considered to be a cheaper alternative for RCC. This paper presents structural behaviour of RBC beams. The results of RBC beams were compared with a control RCC beam of same size and reinforcement. Both types of the beams showed similar load deflection behaviour in pre-yield stage. Whereas, in post yield stage, the RBC beams showed comparatively more deflection as compared to the RCC beam. The ultimate load carrying capacity of the RBC beams was almost similar to that of the RCC beam. This study suggests that the RBC beams can be used economically instead of RCC beams without losing strength and safety of a building.
文摘Some disadvantages associated with conventional brick masonry are: high cost of construction, lower compressive strength and less durability. In order to resolve these problems, a new technique of constructing walls using large size baked clay blocks is introduced. For this purpose, clay blocks of size 150 mm × 300 mm × 1980 mm were cast at a pressure of 6 MPa, and fired at a temperature of 700℃. In this paper, compressive strength and tensile strength of baked clay were investigated in order to find its suitability as a walling material for low cost houses. Cubes of 150 mm sides were tested in compression and the beams were tested in flexure. The results showed that compressive strength of baked clay cubes was found to be 10 MPa and tensile strength, in terms of modulus of rupture, was found to be 2.3 MPa. Since the baked clay blocks are larger in size than traditional bricks, it is inferred that the blocks could be used as a cheaper and stronger walling material.
文摘Attempts are being made to utilize Reinforced Baked Clay (RBC) as a substitute of Reinforced Cement Concrete (RCC) for construction of low cost houses in plains of Pakistan. Since baked clay is considered to be more brittle as compared to concrete. Therefore, it is necessary to investigate how deflection and crack width of RBC beams subjected to impact loading are governed by amount of reinforcement. This paper presents the behaviour of RBC beams under drop weight impact loading. The beams were reinforced with two steel bars, one in compression zone and the other in tension zone. In group A beams, the diameter of steel bars was 12.7 mm, while the beams of group B were reinforced with steel bars of 15.8 mm diameter. The RBC beams were subjected to repeated impacts of a hammer of mass 21 kg falling from a height of 1000 mm. The results show that 1) three times reduction in deflection, and 2) 2.5 times decrease in crack width, were achieved in RBC beams by increasing the area of steel to 50%. In addition to this, all the RBC beams failed within nine blows of the hammer, irrespective of area of reinforcement.
文摘Reinforced Baked Clay (RBC) seems to be potential alternative of Reinforced Cement Concrete (RCC) for construction of low cost houses. In order to utilize RBC as a construction material for buildings, it is necessary to understand compression behaviour of baked clay. In this paper, relation between cube crushing strength and cylinder strength of baked clay is presented. For this purpose, clay beams were cast in a mould and compacted at a pressure of 6 MPa. The clay beams were dried and fired in a kiln at a temperature of 900?C. Cubes of 150 mm size were sawed from a baked clay beam. Cylinders of 150 mm diameter and 300 mm height were cut, from another baked clay beam, using core cutter machine. Both the cubes and cylinders were tested for compressive strength in Universal Testing Machine. The results showed that the cube crushing strength of baked clay was 25 MPa and the ratio of the compressive strength of the cylinders and the cubes was found to be 0.6. Suggestions for improvement of compressive strength of baked clay cylinders are also discussed.
