Photocatalysis has emerged as an effective approach to sustainably convert biomass into value-added products.CoSe_(2)is a promising nonprecious,efficient cocatalyst for photooxidation,which can facilitate the separati...Photocatalysis has emerged as an effective approach to sustainably convert biomass into value-added products.CoSe_(2)is a promising nonprecious,efficient cocatalyst for photooxidation,which can facilitate the separation of photogenerated electron–holes,increase the reaction rates,and enhance photocatalytic efficiency.In this work,we synthesized a stable and efficient photocatalysis system of CoSe_(2)/g-C_(3)N_(4)through attaching CoSe_(2)on g-C_(3)N_(4)sheets,with a yield of 50.12%for the selective photooxidation of xylose to xylonic acid.Under light illumination,the photogenerated electrons were prone to migrating from g-C_(3)N_(4)to CoSe_(2)due to the higher work function of CoSe_(2),resulting in the accelerated separation of photogenerated electron–holes and the promoted photooxidation.Herein,this study reveals the unique function of CoSe_(2),which can significantly promote oxygen adsorption,work as an electron sink and accelerate the generation of ·O_(2)^(-),thereby improving the selectivity toward xylonic acid over other by-products.This work provides useful insights into the design of selective photocatalysts by engineering g-C_(3)N_(4)for biomass high-value utilization.展开更多
Background:Therapy in the latent period is favorable for retarding the process of epileptogenesis.Recently,we have discovered that the activated sigma-1 receptor(Sig-1R)attenuates the hippocampus pathological injury a...Background:Therapy in the latent period is favorable for retarding the process of epileptogenesis.Recently,we have discovered that the activated sigma-1 receptor(Sig-1R)attenuates the hippocampus pathological injury and memory impairment in the latent period of epileptogenesis.But the molecular mechanism needs further investigation.Methods:PRE-084 was utilized as a research tool to highly selectively activate Sig-1R in epileptic mice.After the treatment of PRE-084,the pro-inflammatory cytokines,neuropathological traits,and the level of mitochondrial translocator assembly and maintenance 41 homolog(TAMM41)in the hippocampus were examined.The mode in which the Sig-1R interacts with TAMM41 was explored.The role of TAMM41 in the protecting effect of PRE-084 was established.Results:PRE-084 inhibited the growth of pro-inflammatory cytokines,reduced the formation of gliosis,alleviated neuronal damage in the hippocampus,and attenu-ated memory impairment in the latent period of epileptogenesis.The protein level of TAMM41 decreased in the hippocampi of epileptic mice and increased in the PRE-084-treated mice.The Sig-1R bound with TAMM41 directly,maintaining the stability of TAMM41.Knockdown of TAMM41 reversed the protective effect of PRE-084,and overexpression of TAMM41 exhibited a similar protective action to that of PRE-084.Conclusion:We presented the concept of the“sigma-1 receptor–TAMM41 axis”and proposed that augmenting this axis can attenuate neuroinflammation and memory impairment in the process of epileptogenesis.展开更多
Transition metal carbides,known as MXenes,particularly Ti_(3)C_(2)T_(x),have been extensively explored as promising materials for electrochemical reactions.However,transition metal carbonitride MXenes with high nitrog...Transition metal carbides,known as MXenes,particularly Ti_(3)C_(2)T_(x),have been extensively explored as promising materials for electrochemical reactions.However,transition metal carbonitride MXenes with high nitrogen content for electrochemical reactions are rarely reported.In this work,transition metal carbonitride MXenes incorporated with Pt-based electrocatalysts,ranging from single atoms to sub-nanometer dimensions,are explored for hydrogen evolution reaction(HER).The fabricated Pt clusters/MXene catalyst exhibits superior HER performance compared to the single-atom-incorporated MXene and commercial Pt/C catalyst in both acidic and alkaline electrolytes.The optimized sample shows low overpotentials of 28,65,and 154 mV at a current densities of 10,100,and 500 m A cm^(-2),a small Tafel slope of 29 m V dec^(-1),a high mass activity of 1203 mA mgPt^(-1)and an excellent turnover frequency of 6.1 s^(-1)in the acidic electrolyte.Density functional theory calculations indicate that this high performance can be attributed to the enhanced active sites,increased surface functional groups,faster charge transfer dynamics,and stronger electronic interaction between Pt and MXene,resulting in optimized hydrogen absorption/desorption toward better HER.This work demonstrates that MXenes with a high content of nitrogen may be promising candidates for various catalytic reactions by incorporating single atoms or clusters.展开更多
Correction to:Nano-Micro Letters(2025)17:123 https://doi.org/10.1007/s40820-025-01654-y Following publication of the original article[1],the authors reported that Dr.Mohamed Bououdina’s affiliation needed to be corre...Correction to:Nano-Micro Letters(2025)17:123 https://doi.org/10.1007/s40820-025-01654-y Following publication of the original article[1],the authors reported that Dr.Mohamed Bououdina’s affiliation needed to be corrected from 1 to 2.The correct author affiliation has been provided in this Correction and the original article[1]has been corrected.展开更多
The hot deformation behavior of Al-Cu-Li alloy was investigated by hot compression tests in the temperature range of 340-500℃ with strain rate of 0.001-10.000 s^(-1).Based on the dynamic materials model(DMM),processi...The hot deformation behavior of Al-Cu-Li alloy was investigated by hot compression tests in the temperature range of 340-500℃ with strain rate of 0.001-10.000 s^(-1).Based on the dynamic materials model(DMM),processing maps of the test alloy were developed for optimizing hot processing parameters.The optimum parameters of hot deformation for Al-Cu-Li alloy are at temperature of 400-430℃and strain rate of about 0.100 s^(-1),with efficiency of power dissipation of around 30%.The microstructural manifestation of the alloy deformed in instability domains is flow localization,and dynamic softening first occurs in flow localizations structure.In stable domains,dynamic recovery(DRV) and dynamic recrystallization(DRX) are the main microstructural evolution mechanism.DRX is gradually strengthened with the increase in deformation temperature and the decrease in strain rate.During hot deformation,the DRX mechanism of Al-Cu-Li alloy is dominated by continuous DRX(CDRX).A DRX model of Al-Cu-Li alloy is proposed based on the microstructural evolution process of the test alloy.展开更多
The stretch flanging process is significantly affected by various geometrical,material and process parameters.The punch-die clearance and initial flange length are main parameters which have major effects on the edge ...The stretch flanging process is significantly affected by various geometrical,material and process parameters.The punch-die clearance and initial flange length are main parameters which have major effects on the edge crack location and strain distribution along die profile radius in the flange.Non-axisymmetric stretch flanging process of AA-5052 sheet metal blanks was carried out by numerical simulation to predict the deformation behavior of flange,location and propagation of crack in flange and to investigate the effect of punch die clearance,flange length,die and punch profile radius and friction in the stretch flanging process.The experimental investigations were made to validate the simulations results.The results reveal that the crack length increases with the increase in the flange length.It is found that the flange length has a significant effect in circumferential direction as compared with the radial direction.The punch die clearance has the most significant effect in crack propagation in comparison with flange length.The circumferential strain is found to be larger in the case of punch having the profile radius less than the die profile radius,which leads to faster edge crack propagation.A close agreement is found between simulation and experimental results in terms of location of edge crack and forming load.展开更多
Rice husk ash/natural rubber composites were fabricated by modifying rice husk ash with the rare earth coupling agent DN-8102. The structure of the rice husk ash and the morphological dispersion of the rice husk ash i...Rice husk ash/natural rubber composites were fabricated by modifying rice husk ash with the rare earth coupling agent DN-8102. The structure of the rice husk ash and the morphological dispersion of the rice husk ash in a rubber matrix were charactered by scanning and transmission electron microscopy, respectively.The mechanical properties of the composites were experimentally studied. The surface energy and the interaction between rice husk ash particles can be reduced by surface modification of rice husk ash with a rare earth coupling agent, which reduces the agglomeration of rice husk ash in both liquid and rubber matrices and enhances the interactions between rice husk ash and the rubber phase, and thus results in improved mechanical properties for the resulting rice husk ash/natural rubber composite. The modulus of the composites will increase as the loading level of modified rice husk ash increases. A maximum tensile strength of 25.96 MPa for the composites can be obtained when the modified rice husk ash loading level is 4%.展开更多
Germination and processing are always accompanied by significant changes in the metabolic compositions of rice. In this study, polished rice(rice), brown rice, wet germinated brown rice(WGBR), high temperature and pre...Germination and processing are always accompanied by significant changes in the metabolic compositions of rice. In this study, polished rice(rice), brown rice, wet germinated brown rice(WGBR), high temperature and pressure-treated WGBR(WGBR-HTP), and low temperature-treated WGBR(WGBR-T18) were enrolled. An untargeted metabolomics assay isolated 6 122 positive ions and 4 224 negative ions(multiple difference ≥1.2 or ≤0.8333, P<0.05, and VIP≥1) by liquid chromatography-mass spectrum. These identified ions were mainly classified into three categories, including the compounds with biological roles, lipids, and phytochemical compounds. In addition to WGBR-T18 vs. WGBR, massive differential positive and negative ions were revealed between rice of different forms. Flavonoids, fatty acids, carboxylic acids, and organoxygen compounds were the dominant differential metabolites. Based on the Kyoto Encyclopedia of Genes and Genomes(KEGG) database, there 7 metabolic pathways(phenylalanine/tyrosine/tryptophan biosynthesis, histidine metabolism, betalain biosynthesis, C5-branched dibasic acid metabolism, purine metabolism, zeatin biosynthesis, and carbon metabolism) were determined between brown rice and rice. Germination changed the metabolic pathways of porphyrin and chlorophyll, pyrimidine, and purine metabolisms in brown rice. In addition, phosphonate and phosphinate metabolism, and arachidonic acid metabolism were differential metabolic pathways between WGBR-HTP and WGBR-T18. To sum up, there were obvious variations in metabolic compositions of rice, brown rice, WGBR, and WGBR-HTP. The changes of specific metabolites, such as flavonoids contributed to the antioxidant, anti-inflammatory, anti-cancer, and immunomodulatory effects of GBR. HTP may further improve the nutrition and storage of GBR through influencing specific metabolites, such as flavonoids and fatty acids.展开更多
In order to reduce the materials cost of COREX ironmaking process,sinter has been introduced into the composite burden in China.This work explored the reducing process of sinter in COREX shaft furnace to clarify its r...In order to reduce the materials cost of COREX ironmaking process,sinter has been introduced into the composite burden in China.This work explored the reducing process of sinter in COREX shaft furnace to clarify its reduction properties change and then the effect of sinter proportion on metallurgical performance of composite burden was investigated.The results show that the reducing process of sinter in COREX shaft furnace was basically same with that in blast furnace but sinter seems like breaking faster.Under reducing condition simulated COREX shaft furnace,sinter possessed the worst reduction degradation index(RDI)and undifferentiated reduction index(RI)compared with pellet and iron ore lumps.Macroscopic and microscopic mineralogy changes indicated that sinter presents integral cracking while pellet and lump ore present surface cracking,and no simple congruent relationship exists between cracks of the burden and its ultimate reduction degradation performance.The existence of partial metallurgical performance superposition between composite and single ferrous burden was confirmed.RDI_(+6.3)≥70%and RDI_(+3.15)≥80%were speculated as essential requirements for the composite burden containing sinter in COREX shaft furnace.展开更多
For the first time in the world advanced multi layered Red Mud and MWCNTs (ARMC) based EMI shielding material has been developed at CSIR-AMPRI, Bhopal. Red mud provides oxides of titanium and iron as precursor and the...For the first time in the world advanced multi layered Red Mud and MWCNTs (ARMC) based EMI shielding material has been developed at CSIR-AMPRI, Bhopal. Red mud provides oxides of titanium and iron as precursor and the MWCNTs provides electrical conductivity characteristics necessary for making desired EMI shielding materials. The novel process involves unique designing of chemical compositions and mineralogical phases of red mud, MWCNTs together with appropriate additive and solvent which results in the simultaneous and synergistic chemical reactions among various constituents thereby forming tailored precursor powder. Further, the ceramic processing of tailored precursor powder in appropriate environment enables formation of advanced ARMC shielding material having a variety of ceramic phases with multi elemental compositions and multi layered crystal structures. The synthesized material was characterized by various techniques namely XRD, PL, FESEM, EDXA. The reflection loss (R. L.) of the sample was calculated based on the measured complex permittivity and permeability. The advanced ARMC material with thickness t = 1.5 mm showed a minimum R. L. of -35.5 Db at 14.0 GHz with a response band width of 1.8 GHz. Thus, the developed advanced ARMC material acts as a good EMI wave absorber.展开更多
Natural rubber (NR) is widely used in various fields including aerospace, military industry and transportation due to its superior elasticity and comprehensive mechanical properties. Nonetheless, the commercial NR pre...Natural rubber (NR) is widely used in various fields including aerospace, military industry and transportation due to its superior elasticity and comprehensive mechanical properties. Nonetheless, the commercial NR prepared by different methods usually exhibits different mechanical properties, primarily due to variations in processing conditions during the conversion from latex to bulk rubber material. Consequently, this poses challenges in scientific research and industrial production of NR. In order to assess the properties of various commercially available NR and identify key structural and compositional components, this study systematically compares and analyzes four representative NR raw materials: air dried sheet (ADS), ribbed smoked sheets (RSS), constant viscidity NR (CV), and whole field latex rubber (WF). The investigation focuses on evaluating their static mechanical behavior, SIC behavior, wear resistance, and fatigue resistance. The findings indicate that protein and gel content exhibit a crucial influence on the NR properties. These constituents contribute to the formation of a high-crosslinking density region, generating a heterogeneous network structure within the rubber. This structure amplifies strains during deformation, leading to earlier and stronger strain-induced crystallization (SIC). Among the four commercial NR brands, RSS demonstrates superior overall mechanical and dynamic properties owing to its high protein and gel content. This study serves as a valuable reference for comprehending the differences in properties among various commercial NR, thereby offering guidance for the actual processing and selection of NR.展开更多
As the take-off of China’s macro economy,as well as the rapid development of infrastructure construction,real estate industry,and highway logistics transportation industry,the demand for heavy vehicles is increasing ...As the take-off of China’s macro economy,as well as the rapid development of infrastructure construction,real estate industry,and highway logistics transportation industry,the demand for heavy vehicles is increasing rapidly,the competition is becoming increasingly fierce,and the digital transformation of the production line is imminent.As one of themost important components of heavy vehicles,the transmission front andmiddle case assembly lines have a high degree of automation,which can be used as a pilot for the digital transformation of production.To ensure the visualization of digital twins(DT),consistent control logic,and real-time data interaction,this paper proposes an experimental digital twin modeling method for the transmission front and middle case assembly line.Firstly,theDT-based systemarchitecture is designed,and theDT model is created by constructing the visualization model,logic model,and data model of the assembly line.Then,a simulation experiment is carried out in a virtual space to analyze the existing problems in the current assembly line.Eventually,some improvement strategies are proposed and the effectiveness is verified by a new simulation experiment.展开更多
The corrosion behavior of Mg,AZ31 and AZ91 has been evaluated in 3.5%NaCl solution using weight loss,electrochemical polarization and impedance measurements.Corrosion rate derived from the weight losses demonstrated t...The corrosion behavior of Mg,AZ31 and AZ91 has been evaluated in 3.5%NaCl solution using weight loss,electrochemical polarization and impedance measurements.Corrosion rate derived from the weight losses demonstrated the occurrence of steeply fast corrosion reaction on AZ91 alloy after three hours of immersion,indicating the start of galvanic corrosion.An increase of corrosion rate with immersion time was also observed for AZ31 but with lesser extent than AZ91 alloy.Whereas Mg metals showed a decrease of corrosion rate with immersion time,suggesting the formation of a protective layer on their surfaces.In contrast,the corrosion current density(I_(corr))derived from the Tafel plots,exhibited their corrosion resistances in order of Mg>AZ91>AZ31.Electrochemical charge transfer resistance(R_(ct))and double layer capacitance measured by electrochemical impedance spectroscopy(EIS),are well in accordance with the measured I_(corr).EIS measurements with time and microstructural examination of the corroded and uncorroded samples are helpful in elucidation of results measured by electrochemical polarization.展开更多
The analytical model for springback in arc bending of sheet metal can serve as an excellent design support.The amount of springback is considerably influenced by the geometrical and the material parameters associated ...The analytical model for springback in arc bending of sheet metal can serve as an excellent design support.The amount of springback is considerably influenced by the geometrical and the material parameters associated with the sheet metal.In addition,the applied load during the bending also has a significant influence.Although a number of numerical techniques have been used for this purpose,only few analytical models that can provide insight into the phenomenon are available.A phenomenological model for predicting the springback in arc bending was proposed based on strain as well as deformation energy based approaches.The results of the analytical model were compared with the published experimental as well as FE results of the authors,and the agreement was found to be satisfactory.展开更多
Delayed diagnosis of cancer using conventional diagnostic modalities needs to be addressed to reduce the mortality rate of cancer.Recently,2 D nanomaterial-enabled advanced biosensors have shown potential towards the ...Delayed diagnosis of cancer using conventional diagnostic modalities needs to be addressed to reduce the mortality rate of cancer.Recently,2 D nanomaterial-enabled advanced biosensors have shown potential towards the early diagnosis of cancer.The high surface area,surface functional groups availability,and excellent electrical conductivity of MXene make it the 2 D material of choice for the fabrication of advanced electrochemical biosensors for disease diagnostics.MXene-enabled electrochemical aptasensors have shown great promise for the detection of cancer biomarkers with a femtomolar limit of detection.Additionally,the stability,ease of synthesis,good reproducibility,and high specificity offered by MXene-enabled aptasensors hold promise to be the mainstream diagnostic approach.In this review,the design and fabrication of MXene-based electrochemical aptasensors for the detection of cancer biomarkers have been discussed.Besides,various synthetic processes and useful properties of MXenes which can be tuned and optimized easily and efficiently to fabricate sensitive biosensors have been elucidated.Further,futuristic sensing applications along with challenges will be deliberated herein.展开更多
In this work,molecular structures,dynamic mechanical properties and glass transition temperatures of microbe coagulated natural rubber（NR） samples were analyzed by using pyrolysis gas chromatography-mass spectrometr...In this work,molecular structures,dynamic mechanical properties and glass transition temperatures of microbe coagulated natural rubber（NR） samples were analyzed by using pyrolysis gas chromatography-mass spectrometry（py-GC/MS）,rubber process analyzer（RPA） and dynamic mechanical thermal analysis（DMA）.And the cross-linked network structures and mechanical properties of the corresponding NR vulcanizates were further determined by using nuclear magnetic resonance（NMR） crosslink density spectrometer（XLDS-15） and universal testing machines.The results show that NR raw rubber produced by rapidly coagulated with microorganism exhibits a simple molecular structure composition and good dynamic mechanical properties,and the corresponding NR vulcanizates possess the aggregation structure of high cross-linked density,a high glass transition temperature of-61.5 ℃ and high mechanical properties（tensile strength reaches 25.2 MPa）,as compared with that coagulated with acetic acid.展开更多
Variable masses of nano cerium oxide (CeO2) were added into nano silica (SiO2) to prepare the well-dispersed SiO2-CeO2 suspension (SiO2-CeO2), cetyltrimethyl ammonium bromide (CTAB) was used to adjust the compatibilit...Variable masses of nano cerium oxide (CeO2) were added into nano silica (SiO2) to prepare the well-dispersed SiO2-CeO2 suspension (SiO2-CeO2), cetyltrimethyl ammonium bromide (CTAB) was used to adjust the compatibility of SiO2-CeO2 with rubber matrix, then SiO2-CeO2 modified by CTAB and curing formulas were mixed with fresh natural rubber (NR) latex to prepare NR/SiO2-CeO2 nanocomposites that contained 0–10 parts of CeO2 by a new emulsion compounding method. The morphologies, cure characteristics, mechanical properties and thermal-oxidative stability of NR/SiO2-CeO2 nanocomposites were investigated. The re-sults revealed that the presence of CeO2 in NR/SiO2-CeO2nanocomposites was favorable for enhancing the interaction between NR matrix and fillers, helped to get smaller SiO2-CeO2 particles with narrower particle size distribution, further improved the crosslink densities and mechanical properties of NR/SiO2-CeO2 nanocomposites vulcanizates. Meanwhile, the addition of CeO2 increased the active energy at least 4.66%, obviously improved the thermal-oxidative aging-inhibiting properties of NR/SiO2-CeO2 nanocomposites. Additionally, nanocomposites containing CeO2 promotedTg shift to high temperature direction, causing the nanocomposites featured higher tanδ at 0 oC and lower tanδ at 60 oC and exhibited comparable wet grip and lower rolling resistance when NR/SiO2-CeO2nano-composites were used in tire tread compound.展开更多
B2O3 was added to tire cord steel during refining in a carbon tube furnace.The influence of boron on the deformability of oxide inclusions was studied by metallographic and scanning electron microscope（SEM） observat...B2O3 was added to tire cord steel during refining in a carbon tube furnace.The influence of boron on the deformability of oxide inclusions was studied by metallographic and scanning electron microscope（SEM） observations.The melting points of boron-bearing compound oxide inclusions were calculated using Factsage software.The results showed that the main inclusion was a boron-bearing compound oxide and the deformation properties of the inclusions were clearly improved by adding B2O3.As the boron content was increased from 0.0046% to 0.039%,the proportion of long strip type inclusions changed slightly and the number of inclusions decreased.The low-melting point areas of the MnO-SiO2-Al2O3 and CaO-SiO2-Al2O3 ternary system increased with the addition of B2O3.Moreover,the area increased with the increase of B2O3 content.Clear improvements in the deformation ability of the inclusions occurred when the B2O3 mass percent rose to 5% in the CaO-SiO2-Al2O3 inclusion system and to 10% in the MnO-SiO2-Al2O3 inclusion system展开更多
基金financial support by National Key Research and Development Project(Grant No.2023YFE0109600)Guangzhou Key Research and Development Program(Grant No.2023B03J1330)+5 种基金National Program for Support of Topnotch Young Professionals(Grant No.x2qsA4210090)Guangzhou Basic and Applied Basic Research Foundation(Grant No.2024A04J3413)National Natural Science Foundation of China(Grant No.32201499)State Key Laboratory of Pulp and Paper Engineering(Grant Nos.2023PY01 and 202215)Guangdong Basic and Applied Basic Research Foundation(Grant Nos.2023A1515012519 and 2023B1515040013)China Postdoctoral Science Foundation(Grant No.2023M732021).
文摘Photocatalysis has emerged as an effective approach to sustainably convert biomass into value-added products.CoSe_(2)is a promising nonprecious,efficient cocatalyst for photooxidation,which can facilitate the separation of photogenerated electron–holes,increase the reaction rates,and enhance photocatalytic efficiency.In this work,we synthesized a stable and efficient photocatalysis system of CoSe_(2)/g-C_(3)N_(4)through attaching CoSe_(2)on g-C_(3)N_(4)sheets,with a yield of 50.12%for the selective photooxidation of xylose to xylonic acid.Under light illumination,the photogenerated electrons were prone to migrating from g-C_(3)N_(4)to CoSe_(2)due to the higher work function of CoSe_(2),resulting in the accelerated separation of photogenerated electron–holes and the promoted photooxidation.Herein,this study reveals the unique function of CoSe_(2),which can significantly promote oxygen adsorption,work as an electron sink and accelerate the generation of ·O_(2)^(-),thereby improving the selectivity toward xylonic acid over other by-products.This work provides useful insights into the design of selective photocatalysts by engineering g-C_(3)N_(4)for biomass high-value utilization.
基金This project was supported by grants from the National Natural Science Foundation of China(Grant Nos.81872847 and 82173803)the Science and Technology Planning Project of Xuzhou(Grant No.KC22256)the Science and Technology Developing Fund of The Affiliated Hospital of Xuzhou Medical University(Grant No.2021ZA14)。
文摘Background:Therapy in the latent period is favorable for retarding the process of epileptogenesis.Recently,we have discovered that the activated sigma-1 receptor(Sig-1R)attenuates the hippocampus pathological injury and memory impairment in the latent period of epileptogenesis.But the molecular mechanism needs further investigation.Methods:PRE-084 was utilized as a research tool to highly selectively activate Sig-1R in epileptic mice.After the treatment of PRE-084,the pro-inflammatory cytokines,neuropathological traits,and the level of mitochondrial translocator assembly and maintenance 41 homolog(TAMM41)in the hippocampus were examined.The mode in which the Sig-1R interacts with TAMM41 was explored.The role of TAMM41 in the protecting effect of PRE-084 was established.Results:PRE-084 inhibited the growth of pro-inflammatory cytokines,reduced the formation of gliosis,alleviated neuronal damage in the hippocampus,and attenu-ated memory impairment in the latent period of epileptogenesis.The protein level of TAMM41 decreased in the hippocampi of epileptic mice and increased in the PRE-084-treated mice.The Sig-1R bound with TAMM41 directly,maintaining the stability of TAMM41.Knockdown of TAMM41 reversed the protective effect of PRE-084,and overexpression of TAMM41 exhibited a similar protective action to that of PRE-084.Conclusion:We presented the concept of the“sigma-1 receptor–TAMM41 axis”and proposed that augmenting this axis can attenuate neuroinflammation and memory impairment in the process of epileptogenesis.
基金the final support of ARC DP220103045the startup support of KFUPMPrince Sultan University for their support。
文摘Transition metal carbides,known as MXenes,particularly Ti_(3)C_(2)T_(x),have been extensively explored as promising materials for electrochemical reactions.However,transition metal carbonitride MXenes with high nitrogen content for electrochemical reactions are rarely reported.In this work,transition metal carbonitride MXenes incorporated with Pt-based electrocatalysts,ranging from single atoms to sub-nanometer dimensions,are explored for hydrogen evolution reaction(HER).The fabricated Pt clusters/MXene catalyst exhibits superior HER performance compared to the single-atom-incorporated MXene and commercial Pt/C catalyst in both acidic and alkaline electrolytes.The optimized sample shows low overpotentials of 28,65,and 154 mV at a current densities of 10,100,and 500 m A cm^(-2),a small Tafel slope of 29 m V dec^(-1),a high mass activity of 1203 mA mgPt^(-1)and an excellent turnover frequency of 6.1 s^(-1)in the acidic electrolyte.Density functional theory calculations indicate that this high performance can be attributed to the enhanced active sites,increased surface functional groups,faster charge transfer dynamics,and stronger electronic interaction between Pt and MXene,resulting in optimized hydrogen absorption/desorption toward better HER.This work demonstrates that MXenes with a high content of nitrogen may be promising candidates for various catalytic reactions by incorporating single atoms or clusters.
文摘Correction to:Nano-Micro Letters(2025)17:123 https://doi.org/10.1007/s40820-025-01654-y Following publication of the original article[1],the authors reported that Dr.Mohamed Bououdina’s affiliation needed to be corrected from 1 to 2.The correct author affiliation has been provided in this Correction and the original article[1]has been corrected.
基金financially supported by the National Program on Key Basic Research Project of China (No.2012CB619504)the National Natural Science Foundation of China (No.51274046)
文摘The hot deformation behavior of Al-Cu-Li alloy was investigated by hot compression tests in the temperature range of 340-500℃ with strain rate of 0.001-10.000 s^(-1).Based on the dynamic materials model(DMM),processing maps of the test alloy were developed for optimizing hot processing parameters.The optimum parameters of hot deformation for Al-Cu-Li alloy are at temperature of 400-430℃and strain rate of about 0.100 s^(-1),with efficiency of power dissipation of around 30%.The microstructural manifestation of the alloy deformed in instability domains is flow localization,and dynamic softening first occurs in flow localizations structure.In stable domains,dynamic recovery(DRV) and dynamic recrystallization(DRX) are the main microstructural evolution mechanism.DRX is gradually strengthened with the increase in deformation temperature and the decrease in strain rate.During hot deformation,the DRX mechanism of Al-Cu-Li alloy is dominated by continuous DRX(CDRX).A DRX model of Al-Cu-Li alloy is proposed based on the microstructural evolution process of the test alloy.
基金the Science and Engineering Research Board(SERB)Department of Science & Technology,Government of India for financially supporting this research
文摘The stretch flanging process is significantly affected by various geometrical,material and process parameters.The punch-die clearance and initial flange length are main parameters which have major effects on the edge crack location and strain distribution along die profile radius in the flange.Non-axisymmetric stretch flanging process of AA-5052 sheet metal blanks was carried out by numerical simulation to predict the deformation behavior of flange,location and propagation of crack in flange and to investigate the effect of punch die clearance,flange length,die and punch profile radius and friction in the stretch flanging process.The experimental investigations were made to validate the simulations results.The results reveal that the crack length increases with the increase in the flange length.It is found that the flange length has a significant effect in circumferential direction as compared with the radial direction.The punch die clearance has the most significant effect in crack propagation in comparison with flange length.The circumferential strain is found to be larger in the case of punch having the profile radius less than the die profile radius,which leads to faster edge crack propagation.A close agreement is found between simulation and experimental results in terms of location of edge crack and forming load.
基金Funded by the Central Public-interest Scientific Institution Basal Research Fund for Chinese Academy of Tropical Agricultural Sciences(No.1630122018005).
文摘Rice husk ash/natural rubber composites were fabricated by modifying rice husk ash with the rare earth coupling agent DN-8102. The structure of the rice husk ash and the morphological dispersion of the rice husk ash in a rubber matrix were charactered by scanning and transmission electron microscopy, respectively.The mechanical properties of the composites were experimentally studied. The surface energy and the interaction between rice husk ash particles can be reduced by surface modification of rice husk ash with a rare earth coupling agent, which reduces the agglomeration of rice husk ash in both liquid and rubber matrices and enhances the interactions between rice husk ash and the rubber phase, and thus results in improved mechanical properties for the resulting rice husk ash/natural rubber composite. The modulus of the composites will increase as the loading level of modified rice husk ash increases. A maximum tensile strength of 25.96 MPa for the composites can be obtained when the modified rice husk ash loading level is 4%.
基金funded by the National Key Research and Development Program of China(2021YFD2100902)the Major Science and Technology Program of Heilongjiang,China(2019ZX08B02)+2 种基金the Research Funding for Scientific Research Institutes in Heilongjiang Province,China(CZKYF2021B001)the National Rice Industry Technology System,China(CARS-01-50)the Heilongjiang Touyan Team,China(HITTY-20190034)。
文摘Germination and processing are always accompanied by significant changes in the metabolic compositions of rice. In this study, polished rice(rice), brown rice, wet germinated brown rice(WGBR), high temperature and pressure-treated WGBR(WGBR-HTP), and low temperature-treated WGBR(WGBR-T18) were enrolled. An untargeted metabolomics assay isolated 6 122 positive ions and 4 224 negative ions(multiple difference ≥1.2 or ≤0.8333, P<0.05, and VIP≥1) by liquid chromatography-mass spectrum. These identified ions were mainly classified into three categories, including the compounds with biological roles, lipids, and phytochemical compounds. In addition to WGBR-T18 vs. WGBR, massive differential positive and negative ions were revealed between rice of different forms. Flavonoids, fatty acids, carboxylic acids, and organoxygen compounds were the dominant differential metabolites. Based on the Kyoto Encyclopedia of Genes and Genomes(KEGG) database, there 7 metabolic pathways(phenylalanine/tyrosine/tryptophan biosynthesis, histidine metabolism, betalain biosynthesis, C5-branched dibasic acid metabolism, purine metabolism, zeatin biosynthesis, and carbon metabolism) were determined between brown rice and rice. Germination changed the metabolic pathways of porphyrin and chlorophyll, pyrimidine, and purine metabolisms in brown rice. In addition, phosphonate and phosphinate metabolism, and arachidonic acid metabolism were differential metabolic pathways between WGBR-HTP and WGBR-T18. To sum up, there were obvious variations in metabolic compositions of rice, brown rice, WGBR, and WGBR-HTP. The changes of specific metabolites, such as flavonoids contributed to the antioxidant, anti-inflammatory, anti-cancer, and immunomodulatory effects of GBR. HTP may further improve the nutrition and storage of GBR through influencing specific metabolites, such as flavonoids and fatty acids.
基金Project(2019JJ51007)supported by the Natural Science Foundation of Hunan Province,China。
文摘In order to reduce the materials cost of COREX ironmaking process,sinter has been introduced into the composite burden in China.This work explored the reducing process of sinter in COREX shaft furnace to clarify its reduction properties change and then the effect of sinter proportion on metallurgical performance of composite burden was investigated.The results show that the reducing process of sinter in COREX shaft furnace was basically same with that in blast furnace but sinter seems like breaking faster.Under reducing condition simulated COREX shaft furnace,sinter possessed the worst reduction degradation index(RDI)and undifferentiated reduction index(RI)compared with pellet and iron ore lumps.Macroscopic and microscopic mineralogy changes indicated that sinter presents integral cracking while pellet and lump ore present surface cracking,and no simple congruent relationship exists between cracks of the burden and its ultimate reduction degradation performance.The existence of partial metallurgical performance superposition between composite and single ferrous burden was confirmed.RDI_(+6.3)≥70%and RDI_(+3.15)≥80%were speculated as essential requirements for the composite burden containing sinter in COREX shaft furnace.
文摘For the first time in the world advanced multi layered Red Mud and MWCNTs (ARMC) based EMI shielding material has been developed at CSIR-AMPRI, Bhopal. Red mud provides oxides of titanium and iron as precursor and the MWCNTs provides electrical conductivity characteristics necessary for making desired EMI shielding materials. The novel process involves unique designing of chemical compositions and mineralogical phases of red mud, MWCNTs together with appropriate additive and solvent which results in the simultaneous and synergistic chemical reactions among various constituents thereby forming tailored precursor powder. Further, the ceramic processing of tailored precursor powder in appropriate environment enables formation of advanced ARMC shielding material having a variety of ceramic phases with multi elemental compositions and multi layered crystal structures. The synthesized material was characterized by various techniques namely XRD, PL, FESEM, EDXA. The reflection loss (R. L.) of the sample was calculated based on the measured complex permittivity and permeability. The advanced ARMC material with thickness t = 1.5 mm showed a minimum R. L. of -35.5 Db at 14.0 GHz with a response band width of 1.8 GHz. Thus, the developed advanced ARMC material acts as a good EMI wave absorber.
基金supported by Research and Development Program in key area of Guangdong Province(No.2020B020217001)the National Natural Science Foundation of China(No.52173058)National Key R&D Program of China(No.2022YFD2301202).
文摘Natural rubber (NR) is widely used in various fields including aerospace, military industry and transportation due to its superior elasticity and comprehensive mechanical properties. Nonetheless, the commercial NR prepared by different methods usually exhibits different mechanical properties, primarily due to variations in processing conditions during the conversion from latex to bulk rubber material. Consequently, this poses challenges in scientific research and industrial production of NR. In order to assess the properties of various commercially available NR and identify key structural and compositional components, this study systematically compares and analyzes four representative NR raw materials: air dried sheet (ADS), ribbed smoked sheets (RSS), constant viscidity NR (CV), and whole field latex rubber (WF). The investigation focuses on evaluating their static mechanical behavior, SIC behavior, wear resistance, and fatigue resistance. The findings indicate that protein and gel content exhibit a crucial influence on the NR properties. These constituents contribute to the formation of a high-crosslinking density region, generating a heterogeneous network structure within the rubber. This structure amplifies strains during deformation, leading to earlier and stronger strain-induced crystallization (SIC). Among the four commercial NR brands, RSS demonstrates superior overall mechanical and dynamic properties owing to its high protein and gel content. This study serves as a valuable reference for comprehending the differences in properties among various commercial NR, thereby offering guidance for the actual processing and selection of NR.
基金supported by China National Heavy Duty Truck Group Co.,Ltd.(Grant No.YF03221048P)the Shanghai Municipal Bureau of Market Supervision and Administration(Grant No.2022-35)New Young TeachersResearch Start-Up Foundation of Shanghai Jiao Tong University(Grant No.22X010503668).
文摘As the take-off of China’s macro economy,as well as the rapid development of infrastructure construction,real estate industry,and highway logistics transportation industry,the demand for heavy vehicles is increasing rapidly,the competition is becoming increasingly fierce,and the digital transformation of the production line is imminent.As one of themost important components of heavy vehicles,the transmission front andmiddle case assembly lines have a high degree of automation,which can be used as a pilot for the digital transformation of production.To ensure the visualization of digital twins(DT),consistent control logic,and real-time data interaction,this paper proposes an experimental digital twin modeling method for the transmission front and middle case assembly line.Firstly,theDT-based systemarchitecture is designed,and theDT model is created by constructing the visualization model,logic model,and data model of the assembly line.Then,a simulation experiment is carried out in a virtual space to analyze the existing problems in the current assembly line.Eventually,some improvement strategies are proposed and the effectiveness is verified by a new simulation experiment.
文摘The corrosion behavior of Mg,AZ31 and AZ91 has been evaluated in 3.5%NaCl solution using weight loss,electrochemical polarization and impedance measurements.Corrosion rate derived from the weight losses demonstrated the occurrence of steeply fast corrosion reaction on AZ91 alloy after three hours of immersion,indicating the start of galvanic corrosion.An increase of corrosion rate with immersion time was also observed for AZ31 but with lesser extent than AZ91 alloy.Whereas Mg metals showed a decrease of corrosion rate with immersion time,suggesting the formation of a protective layer on their surfaces.In contrast,the corrosion current density(I_(corr))derived from the Tafel plots,exhibited their corrosion resistances in order of Mg>AZ91>AZ31.Electrochemical charge transfer resistance(R_(ct))and double layer capacitance measured by electrochemical impedance spectroscopy(EIS),are well in accordance with the measured I_(corr).EIS measurements with time and microstructural examination of the corroded and uncorroded samples are helpful in elucidation of results measured by electrochemical polarization.
文摘The analytical model for springback in arc bending of sheet metal can serve as an excellent design support.The amount of springback is considerably influenced by the geometrical and the material parameters associated with the sheet metal.In addition,the applied load during the bending also has a significant influence.Although a number of numerical techniques have been used for this purpose,only few analytical models that can provide insight into the phenomenon are available.A phenomenological model for predicting the springback in arc bending was proposed based on strain as well as deformation energy based approaches.The results of the analytical model were compared with the published experimental as well as FE results of the authors,and the agreement was found to be satisfactory.
基金Open access funding provided by Shanghai Jiao Tong University.
文摘Delayed diagnosis of cancer using conventional diagnostic modalities needs to be addressed to reduce the mortality rate of cancer.Recently,2 D nanomaterial-enabled advanced biosensors have shown potential towards the early diagnosis of cancer.The high surface area,surface functional groups availability,and excellent electrical conductivity of MXene make it the 2 D material of choice for the fabrication of advanced electrochemical biosensors for disease diagnostics.MXene-enabled electrochemical aptasensors have shown great promise for the detection of cancer biomarkers with a femtomolar limit of detection.Additionally,the stability,ease of synthesis,good reproducibility,and high specificity offered by MXene-enabled aptasensors hold promise to be the mainstream diagnostic approach.In this review,the design and fabrication of MXene-based electrochemical aptasensors for the detection of cancer biomarkers have been discussed.Besides,various synthetic processes and useful properties of MXenes which can be tuned and optimized easily and efficiently to fabricate sensitive biosensors have been elucidated.Further,futuristic sensing applications along with challenges will be deliberated herein.
基金Special Fund for Agro-scientific Research in the Public Interest Project (nyhyzx07-033-6)Natural Science Foundation of Hainan Province (807047)
文摘In this work,molecular structures,dynamic mechanical properties and glass transition temperatures of microbe coagulated natural rubber（NR） samples were analyzed by using pyrolysis gas chromatography-mass spectrometry（py-GC/MS）,rubber process analyzer（RPA） and dynamic mechanical thermal analysis（DMA）.And the cross-linked network structures and mechanical properties of the corresponding NR vulcanizates were further determined by using nuclear magnetic resonance（NMR） crosslink density spectrometer（XLDS-15） and universal testing machines.The results show that NR raw rubber produced by rapidly coagulated with microorganism exhibits a simple molecular structure composition and good dynamic mechanical properties,and the corresponding NR vulcanizates possess the aggregation structure of high cross-linked density,a high glass transition temperature of-61.5 ℃ and high mechanical properties（tensile strength reaches 25.2 MPa）,as compared with that coagulated with acetic acid.
基金supported by the Special Fund for Agro-scientific Research in the Public Interest,Ministry of Agriculture of the People’s Republic of China(201403066)Natural Science Foundation of Hainan Province(20155198)the Fundamental Research Funds for Rubber Research Institute,Chinese Academy of Tropical Agricultural Science(1630022014014)
文摘Variable masses of nano cerium oxide (CeO2) were added into nano silica (SiO2) to prepare the well-dispersed SiO2-CeO2 suspension (SiO2-CeO2), cetyltrimethyl ammonium bromide (CTAB) was used to adjust the compatibility of SiO2-CeO2 with rubber matrix, then SiO2-CeO2 modified by CTAB and curing formulas were mixed with fresh natural rubber (NR) latex to prepare NR/SiO2-CeO2 nanocomposites that contained 0–10 parts of CeO2 by a new emulsion compounding method. The morphologies, cure characteristics, mechanical properties and thermal-oxidative stability of NR/SiO2-CeO2 nanocomposites were investigated. The re-sults revealed that the presence of CeO2 in NR/SiO2-CeO2nanocomposites was favorable for enhancing the interaction between NR matrix and fillers, helped to get smaller SiO2-CeO2 particles with narrower particle size distribution, further improved the crosslink densities and mechanical properties of NR/SiO2-CeO2 nanocomposites vulcanizates. Meanwhile, the addition of CeO2 increased the active energy at least 4.66%, obviously improved the thermal-oxidative aging-inhibiting properties of NR/SiO2-CeO2 nanocomposites. Additionally, nanocomposites containing CeO2 promotedTg shift to high temperature direction, causing the nanocomposites featured higher tanδ at 0 oC and lower tanδ at 60 oC and exhibited comparable wet grip and lower rolling resistance when NR/SiO2-CeO2nano-composites were used in tire tread compound.
文摘B2O3 was added to tire cord steel during refining in a carbon tube furnace.The influence of boron on the deformability of oxide inclusions was studied by metallographic and scanning electron microscope（SEM） observations.The melting points of boron-bearing compound oxide inclusions were calculated using Factsage software.The results showed that the main inclusion was a boron-bearing compound oxide and the deformation properties of the inclusions were clearly improved by adding B2O3.As the boron content was increased from 0.0046% to 0.039%,the proportion of long strip type inclusions changed slightly and the number of inclusions decreased.The low-melting point areas of the MnO-SiO2-Al2O3 and CaO-SiO2-Al2O3 ternary system increased with the addition of B2O3.Moreover,the area increased with the increase of B2O3 content.Clear improvements in the deformation ability of the inclusions occurred when the B2O3 mass percent rose to 5% in the CaO-SiO2-Al2O3 inclusion system and to 10% in the MnO-SiO2-Al2O3 inclusion system
