With the development that the demand for agricultural products' consumer market is gradually toward to the direction of complication, the existing agricultural logistics organizational model cannot adapt to the ch...With the development that the demand for agricultural products' consumer market is gradually toward to the direction of complication, the existing agricultural logistics organizational model cannot adapt to the characteristics of agricultural product logistics and the changes in the consumer demand. According to the analysis of virtual operation trend of agricultural product logistics enterprise, this paper expatiates the concept and characteristics of agricultural product virtual logistics enterprise(APVLE) and proposes four steps to build an APVLE, including the analysis of key elements about APVLE, the identification about agricultural product logistics business, the project decomposition of APVLE and the partner selection in APVLE.展开更多
To protect carbon materials from oxidation,SiC coatings were prepared on carbon/carbon(C/C)composites and graphite by chemical vapor reaction.SEM and XRD analyses show that the coatings obtained are composed of SiC gr...To protect carbon materials from oxidation,SiC coatings were prepared on carbon/carbon(C/C)composites and graphite by chemical vapor reaction.SEM and XRD analyses show that the coatings obtained are composed of SiC grains and micro-crystals. The influence of different carbon substrates on oxidation behavior of coated samples was investigated,and then their oxidation mechanisms were studied.Oxidation test shows that the SiC coated graphite has a better oxidation resistance than SiC coated C/C composites at high temperatures(1 623 K and 1 823 K).In the oxidation process,the oxidation curves of SiC coated C/C composites are linear,while those of SiC coated graphite follow a quasi-parabolic manner.The oxidation mechanism of the former is controlled by chemical reaction while the latter is controlled by oxygen diffusion based on the experimental results.The variation of oxidation behavior and mechanism of SiC coatings on two kinds of carbon substrates are primarily contributed to their structure differences.展开更多
A newly developed on-line visual ferrograph（OLVF） gives a new way for engine wear state monitoring. However, the reliability of on-line wear debris image processing is challenged in both monitoring ship engines and ...A newly developed on-line visual ferrograph（OLVF） gives a new way for engine wear state monitoring. However, the reliability of on-line wear debris image processing is challenged in both monitoring ship engines and the Caterpillar bench test, which weren＇t reported in previous studies. Two problems were encountered in monitoring engines and processing images. First, small wear debris becomes hard to be identified from the image background after monitoring for a period of time. Second, the identification accuracy for wear debris is greatly reduced by background noise because of oil getting dark after nmning a period of time. Therefore, the methods adopted in image processing are examined. Two main reasons for the problems in wear debris identification are generalized as follows. Generally, the binary threshold was determined by global image pixels, and was easily affected by the non-objective zone in the image. The boundary of the objective zone in the binary image was misrecognized because of oil color becoming lighter during monitoring. Accordingly, improvements were made as follows. The objective zone in a global binary image was identified by scanning a column of pixels, and then a secondary binary process confined in the objective zone was carried out to identify small wear debris. Linear filtering with a specific template was used to depress noise in a binary image, and then a low-pass filtering was performed to eliminate the residual noise. Furthermore, the morphology parameters of single wear debris were extracted by separating each wear debris by a gray stack, and two indexes, WRWR （relative wear rate） and WRWS （relative wear severity）, were proposed for wear description. New indexes were provided for on-line monitoring of engines.展开更多
In order to realize simultaneous quantitative detection of various enteroviruses from water samples, a real-time reverse transcriptionpolymerase chain reaction （real-time RT-PCR） method was developed with universal ...In order to realize simultaneous quantitative detection of various enteroviruses from water samples, a real-time reverse transcriptionpolymerase chain reaction （real-time RT-PCR） method was developed with universal primer pairs designed based on the highly conserved non-coding region sequences of genome targeting poliovirus, coxsackievirus and enterovirus 71. The recombinant plasmid was constructed as enterovirus DNA standard by cloning poliovirus cDNA into a pMD18-T vector. The real-time RT-PCR method utilizing SYBR Green I was optimized. As a result of a series of examinations, the detection limit of the method was found to be 2.31 genome equivalent copy （GEC）/μL, the intraand inter-assay variations were lower than 2% and 5%, respectively, and enteroviruses were well distinguished from other microorganisms. There was a good linear relationship （r 2 = 0.997） between the logarithm of viral density and cycle threshold in a wide range of 2.31 × 10 0 to 2.31 × 10 9 GEC/μL. The validity of the method was further proved by its application for the detection of enteroviruses from various practical water samples.展开更多
To protect carbon/carbon (C/C) composites from oxidation, a SiC coating modified with SiO2 was prepared by a complex technology. The inner SiC coating with thickness varying from 150 to 300 μm was initially coated by...To protect carbon/carbon (C/C) composites from oxidation, a SiC coating modified with SiO2 was prepared by a complex technology. The inner SiC coating with thickness varying from 150 to 300 μm was initially coated by chemical vapor reaction (CVR): a simple and cheap technique to prepare the SiC coating via siliconizing the substrate that was exposed to the mixed vapor (Si and SiO2) at high temperatures (1 923?2 273 K). Then the as-prepared coating was processed by a dipping and drying procedure with tetraethoxysilane as source materials to form SiO2 to fill the cracks and holes. Oxidation tests show that, after oxidation in air at 1 623 K for 10 h and thermal cycling between 1 623 K and room temperature 5 times, the mass loss of the CVR coated sample is up to 18.21%, while the sample coated with modified coating is only 5.96%, exhibiting an obvious improvement of oxidation and thermal shock resistance of the coating. The mass loss of the modified sample is mainly contributed to the reaction of C/C substrate with oxygen diffusing through the penetrating cracks formed in thermal shock tests.展开更多
Oxidation protective MoSi2-MosSi3/SiC multi-coatings for carbon/carbon composites were prepared by chemical vapor reaction and slurry-sintering method. The influence of preparation technology on the structure and phas...Oxidation protective MoSi2-MosSi3/SiC multi-coatings for carbon/carbon composites were prepared by chemical vapor reaction and slurry-sintering method. The influence of preparation technology on the structure and phase composition of the coating was investigated by scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS） and X-ray diffraction （XRD） analyses, and then their relationship was discussed. The results indicate that the Si/Mo ratio of the slurry and sintering processing were two main factors that significantly affected the structure and phase composition of the multi-coating. Appropriate sintering process and relatively high Si/Mo ratio were essential for preparing the multi-coating with dense structure and favorable phase composition. After being sintered at 1723 K for 2 h and with the Si/Mo ratio of the slurry being 4.5 （weight ratio）, a dense structure accompanied by favorable phase composition of the coating can be obtained. When heat treated at 2373 K for I h, this coating became more compact and continuous. Oxidation tests （performed at 1623 and 1823 K） demonstrated that both of these two obtained multi-coatings exhibited better anti-oxidation property than single layer SiC coating.展开更多
A large quantity of drilling core, paleontology, geochemistry and geophysics data revealed several features of the Jiyang subbasin during the deposition of the Ekl-ES4x members： （1） the paleotopography of the gentl...A large quantity of drilling core, paleontology, geochemistry and geophysics data revealed several features of the Jiyang subbasin during the deposition of the Ekl-ES4x members： （1） the paleotopography of the gentle slope belt had an extremely low gradient; （2） the paleoclimate frequently alternated between dry and wet periods in a generally arid setting; （3） there was strong weathering around the periphery of the basin; （4） the lake was very shallow; （5） the lake level frequently rose and fell; and （6） the sedimentary environment of the gentle slope belt was an over- flooding lake. All of these factors provided favorable geological conditions for the development of an over-flooding lake delta. The lithologies of the continental over-flooding lake delta deposits are complex and diverse. The compositional maturity is moderate to low, and the grain size distribution curves and sedimentary structures indicate the presence of both gravity and traction currents. The sedimentary microfacies associations consist of a combination of ordered superposition of flood channels, distributary channels and sheet sands. The delta exhibits a weak foreset seismic reflection. The over-flooding lake delta deposits are laterally extensive. The sandstone content is high, and the individual sandstone beds are thin. The flood channel and distributary channel deposits exhibit evidence of bifurcation and lateral migration. The distribution of the sandbodies and the oxidation color of the mudstones provide evidence of cyclic deposition. The paleoclimate was the dominant factor controlling the development of the over-flooding lake delta. Due to the frequently alternating wet and dry paleoclimates, the over-flooding lake delta is characterized by the development of a broad upper plain and a lower delta plain. The upper delta plain is characterized by flood channel deposits, whereas the lower delta plain is represented by distributary channel deposits. The transition zone is characterized by the interaction of flood channels and distributary channels. Due to fault activity, the sandbodies of the over-flooding lake delta were juxtaposed against hydrocarbon source rocks, which was favorable for the development of lithologic reservoirs or structural-lithologic reservoirs. The lower delta plain deposits comprise the most favorable reservoirs.展开更多
In underground mines, high air temperatures in the summer months lead to an increase in inlet airflow temperatures. This leads to seasonal thermal pollution in the mines. This paper examines the dynamics and effects o...In underground mines, high air temperatures in the summer months lead to an increase in inlet airflow temperatures. This leads to seasonal thermal pollution in the mines. This paper examines the dynamics and effects of seasonal variation in surface air temperatures and surrounding rock temperatures in deep coal mines. It also examines temperature variations in the main ventilation circuit, working face, and surrounding rock. The study results revealed that airflow temperatures were significantly affected by seasonal air temperature variations. The greater the distance was between the inlet and the wellhead of the ventilation shaft, the less the effect was on temperature. Moreover, slight temperature variations (1.0-3.0 ℃) were observed between various points on the return route during the summer months. Airflow temperatures along the airflow inlet to the return route of the working face first decreased, but then increased. The temperature field of the surrounding rock increased gradually with increased distance between the mine roadway and inlet, with recorded rock temperatures as high as 40.53 ℃. The radius of the heat-adjusting layer was between 28 and 33 m.展开更多
The algal dolostone of the Upper Sinian Dengying Formation （corresponding to the Ediacaran system） in the Upper Yangtze Platform of China possesses a rich diversity of microorganisms and is an ideal site for the stu...The algal dolostone of the Upper Sinian Dengying Formation （corresponding to the Ediacaran system） in the Upper Yangtze Platform of China possesses a rich diversity of microorganisms and is an ideal site for the study of ancient microbial dolomite. We focused on algal dolostone and its microbial dolomite in the Hanyuan area of Sichuan Province, China. The macroscopic petrological features, microscopic morphology, texture characteristics of the fossil microorganisms and microbial dolomite, and geochemical characteristics were investigated. We found rich fossil microorganisms and microbial dolomites in the laminated, stromatolithic, uniform and clotted （algal） dolostones. The microorganisms present were mainly body fossils of cyanobacteria （including Renalcis, Girvanella, Nanococcus, and Epiphyton） and their trace fossils （including microbial mats （biofilms）, algal traces, and spots）. In addition, there was evidence of sulfate-reducing bacteria （SRB）, moderately halophilic aerobic bacteria, and red algae. The microbial dolomites presented cryptocrystalline textures under polarizing microscope and nanometer-sized granular （including spherulitic and pene-cubical granular） and （sub） micron-sized sheet-like, irregular, spherical and ovoidal morphologies under scanning electron microscope （SEM）. The microbial dolomites were formed by microbialiy induced mineralization in the intertidal zone and lagoon environments during the depositional and syngenetic stages and microbially influenced mineralization in the supratidal zone environment during the penecontemporaneous stage. The microbial metabolic activities and extracellular polymeric substances （EPS） determined the morphology and element composition of microbial dolomite. During the depositional and syngenetic stages, the metabolic activities of cyanobacteria and SRB were active and EPS, biofilms and microbial mats were well-developed. EPS provided a large number of nucleation sites. Accordingly, many nanometer-sized pene-cubical granular and （sub） micron-sized sheet-like microbial dolomites were formed. During the penecontemporaneous stage, SBR, cyanobacteria, and moderately halophilic aerobic bacteria were inactive. Furthermore, nucleation sites reduced significantly and were derived from both the EPS of surviving microorganisms and un-hydrolyzed EPS from dead microorganisms. Consequently the microbial dolomites present nanometer-sized spherulitic and micron-sized irregular, spherical, and ovoidal morphologies. Overall, the microbial dolomites evolved from nanometer-sized granular （including spherulitic and pene-cubical granular） dolomites to （sub） micron-sized sheet-like, irregular, spherical and ovoidal dolomites, and then to macroscopic laminated, stromatolithic, uniform, and clotted dolostones. These findings reveal the correlation between morphological evolution of microbial dolomite and microbial activities showing the complexity and diversity of mineral （dolomite）-microbe interactions, and providing new insight into microbial biomineralization and microbial dolomite in the Precambrian era.展开更多
In order to simplify the boundary conditions of pavement temperature field,the "Environment-Surface" system which considered the natural environment and pavement surface was established.Based on this system,...In order to simplify the boundary conditions of pavement temperature field,the "Environment-Surface" system which considered the natural environment and pavement surface was established.Based on this system,the partial differential equations of the one-dimensional heat conduction in the pavement were established on the basis of the heat transfer theory.Furthermore,the function forms of the initial and boundary conditions of the equations were created through the field experiments.The general solution of the pavement one-dimensional heat conduction partial differential equations was acquired by using Green's function,and the explicit expression of pavement temperature field under specific constraint conditions was derived.For the purpose of analysis,the pavement temperatures in different seasons were calculated using the explicit expression of pavement temperature field,and the calculation accuracy was analyzed through the comparison between measured and calculated values.Then,the relationship between fitting accuracy and calculation accuracy of pavement temperatures was analyzed.The analysis results show that: the usage of "Environment-Surface" system simplifies the calculation of pavement temperature field; the relative error between calculated and measured values is generally less than 7% and is seldom influenced by seasons; there is a positive correlation between the calculation accuracy and the fitting accuracy of pavement surface temperature; high fitting accuracy would result in less error of pavement temperature prediction.展开更多
In the harsh environment where n ode density is sparse, the slow-moving nodes cannot effectively utilize the encountering opportunities to realize the self-organized identity authentications, and do not have the chanc...In the harsh environment where n ode density is sparse, the slow-moving nodes cannot effectively utilize the encountering opportunities to realize the self-organized identity authentications, and do not have the chance to join the network routing. However, considering m ost of the communications in opportunistic networks are caused by forwarding operations, there is no need to establish the complete mutual authentications for each conversation. Accordingly, a novel trust management scheme is presented based on the information of behavior feedback, in order to complement the insufficiency of identity authentications. By utilizing the certificate chains based on social attributes, the mobile nodes build the local certificate graphs gradually to realize the web of "Identity Trust" relationship. Meanwhile, the successors generate Verified Feedback Packets for each positive behavior, and consequently the "Behavior Trust" relationship is formed for slow-moving nodes. Simulation result shows that, by implementing our trust scheme, the d elivery probability and trust reconstruction ratio can be effectively improved when there are large numbers of compromised nodes, and it means that our trust management scheme can efficiently explore and filter the trust nodes for secure forwarding in opportunistic networks.展开更多
This study investigates the relationship among pollutant emissions,energy consumption and economic development in China during the period 1982-2007 by using a one-step GMM-system model under a multivariable panel VAR ...This study investigates the relationship among pollutant emissions,energy consumption and economic development in China during the period 1982-2007 by using a one-step GMM-system model under a multivariable panel VAR framework,controlling for capital stock and labor force.Regarding the data for all 28 provinces as a whole,we find that there is a unidirectional positive relationship running from pollutant emission to economic development and a unidirectional negative relationship between pollutant emission and energy consumption.Based on traditional economic planning,the panel data of28 provinces are divided into two cross-province groups.It is discovered that in the eastern coastal region of China,there is only a unidirectional positive causal relationship leading from economic development to pollutant emission;while in the central and western regions,there are the unidirectional Granger causal relationships between pollutant emission and energy consumption,as well as between pollutant emission and economic development.There is also a unique unidirectional causal relationship running from economic development to energy consumption,which does not appear in the eastem coastal region or in China as a whole.展开更多
A critical challenge for mobile ad hoc networks is the design of efficient routing protocols which are able to provide high bandwidth utilization and desired fairness in mobile wireless environment without any fixed c...A critical challenge for mobile ad hoc networks is the design of efficient routing protocols which are able to provide high bandwidth utilization and desired fairness in mobile wireless environment without any fixed communication establishments. Although extensive efforts have already been devoted to providing optimization based distributed congestion elusion strategy for efficient bandwidth utilization and fair allocation in both wired and wireless networks,a common assumption therein is the fixed link capacities,which will unfortunately limit the application scope in mobile ad hoc networks where channels keep changing. In this paper,an effective congestion elusion strategy is presented explicitly based on ant colony algorithm for mobile ad hoc networks, which will explore the optimal route between two nodes promptly,meanwhile forecast congestion state of the link. Accordingly,a new path will be found rapidly to have the flow spread around to relieve the congestion degree. Compared with OLSR,the strategy proposed will greatly reduce the packet loss ratio and the average end-to-end delay at the same time,which illustrate that it will make use of networking resource effectively.展开更多
Tool wear is a noteworthy problem in the process of shield tunneling,and the degree of wear varies with stratum.The sand-pebble strata in Beijing are typically mechanically unstable.However,many subways are buried who...Tool wear is a noteworthy problem in the process of shield tunneling,and the degree of wear varies with stratum.The sand-pebble strata in Beijing are typically mechanically unstable.However,many subways are buried wholly or partially in sand-pebble strata.Taking the Beijing New Airport line tunneling project as research background,this study evaluated the wear characteristics of the multiconfiguration rippers of a 9-m-diameter spoke-type shield tunneling machine in a sand-pebble stratum.The wear values of five ripper teeth and ripper flanks were analyzed based on field-measured data from the Beijing New Airport line project.As the analytical results show,the wear value generally increases as the installation radius enlarges with the rise of cutting trace length.The wear of the 190-rippers was divided into five categories:pedestal wear,ripper teeth collapse,uniform wear,ripper teeth falling off and ripper flank wear.Uniform wear of the ripper teeth and ripper flank wear were the two abrasion types of the 190-rippers.The teeth of the 155-rippers mostly maintained their cutting capacity under the protection of the 190-rippers.A wear prediction model of linear fitting field data was developed for a 190-ripper face to obtain the optimum shield driving distance in the sand-pebble stratum.The average wear coefficients of the 190-ripper before and after replacement matched well,being 0.045 and 0.066 mm/km,respectively.The results of this study provide a theoretical reference for tool wear prediction in shield construction under similar geological conditions.展开更多
Let P（s, δ） be a sphere plant family described by the transfer function set where the coefficients of the denominator and numerator polynomials are affine in a real uncertain parameter vector δ satisfying the Eucl...Let P（s, δ） be a sphere plant family described by the transfer function set where the coefficients of the denominator and numerator polynomials are affine in a real uncertain parameter vector δ satisfying the Euclidean norm constraint ｜｜δ｜｜〈δ. The concept of stabilizability radius of P（s, δ） is introduced which is the norm bound δs for δ such that every member plant of P（s, δ） is stabilizable if and only if ｜｜δ｜｜〈δs. The stabilizability radius can be simply interpreted as the ＇largest sphere＇ around the nominal plant P（s,θ） such that P（s, δ） is stabilizable. The numerical method and the analytical method are presented to solve the stabilizability radius calculation problem of the sphere plants.展开更多
The diabetic ulcer is one of the serious complications of diabetes.In this study,we aimed to establish an exosomal microRNA(miRNA)-targetedmessenger RNA(mRNA)regulatory network for screening new biomarkers for diabeti...The diabetic ulcer is one of the serious complications of diabetes.In this study,we aimed to establish an exosomal microRNA(miRNA)-targetedmessenger RNA(mRNA)regulatory network for screening new biomarkers for diabetic ulcer treatment.For this purpose,exosomes were extracted from bone marrow stem cells(BMSCs)collected from diabetic ulcer patients and healthy adults.The miRNAs in exosomes was detected by high-throughput sequencing analysis.The Gene Ontology(GO)and Kyoto Encyclopedia of Genes and Genomes(KEGG)pathway enrichment analysis of the differential miRNAs were performed.The miRNA-mRNA regulatory network between candidate miRNAs and their target genes were constructed by Cytoscape software basing on mRNA expression profiles data of diabetic ulcer patients from Gene Expression Omnibus(GEO).GO and KEGG analyses of the core genes were performed.A total of 63 differential expressed miRNAs in BMSCs exosomes were identified between diabetic ulcer patients and healthy adults.The GO analysis of miRNAs showed that it was mainly related to signal transduction and intercellular transport,and KEGG analysis showed that it was related to the vascular endothelial growth factor(VEGF)signaling pathway.The core genes of the miRNA-mRNA network were thioredoxin interacting protein(TXNIP),cell division cycle 14A(CDC14A),cache domain containing 1(CACHD1),interferon-induced protein 44 like(IFI44L),late cornified envelope 1AL(CE1A),leucine-rich repeats and immunoglobulin-like domains 2(LRIG2),palmdelphin(PALMD)and serine and arginine-rich splicing factor 11(SRSF11).GO analysis of the core genes was related to platelet-derived growth factor receptor signaling pathway.The KEGG analysis of the core genes was related to the cell cycle and nucleotide-binding oligomerization domain(NOD)-like receptor signaling pathway.A potential miRNA-mRNA regulatory network provides a comprehensive understanding of the molecular mechanisms and promising new targets such as miR-130a-5p,SESN2,LRIG2,and CDC14A for the wound repair of diabetic ulcers.展开更多
[Objectives]To explore the stability of sanguinarine and chelerythrine in Macleaya cordata(Willd.)R.Br.[Methods]The solubility and stability of sanguinarine and chelerythrine in seven solvents were measured by HPLC.Be...[Objectives]To explore the stability of sanguinarine and chelerythrine in Macleaya cordata(Willd.)R.Br.[Methods]The solubility and stability of sanguinarine and chelerythrine in seven solvents were measured by HPLC.Besides,the effects of water quality,light source,oxidant,temperature,and pH on stability were investigated.[Results]The solubility and stability of sanguinarine and chelerythrine in methanol and ethanol are good;the stability of sanguinarine and chelerythrine in distilled water and rainwater is not affected by light and is very stable,but they are unstable in tap water whether they are protected from light or not;oxidants have a great influence on the stability of sanguinarine and chelerythrine;sanguinarine and chelerythrine are stable at room temperature lower than 54℃;sanguinarine is stable in pH 2.5-7.0,while chelerythrine is stable in pH 2.5-8.0.[Conclusions]The good stability of sanguinarine and chelerythrine under specific conditions shows that they have broad development prospects and value.展开更多
The on-orhit transient temperature of reflector laminate film was analyzed by using finite element method （FEM）. Numerical simulation was used by FEM software ANSYS. Results reveal that the temperature levels of the...The on-orhit transient temperature of reflector laminate film was analyzed by using finite element method （FEM）. Numerical simulation was used by FEM software ANSYS. Results reveal that the temperature levels of the laminate composite membrane alternate greatly in the orbital period, which is about±80℃. This range exceeds the material ＇ s operating temperature level. So it is necessary to put effective thermal control into effect to the laminate composite membrane. There is temperature gradient in the thickness direction of the laminate composite membrane; there is a light change in Kevlar/Epoxy layer. The temperature of the laminate composite membrane is obviously lower than the seam＇ s temperature. Results provide reference to the thermal control of the inflatable reflector with high precision requirement.展开更多
The axisymmetric deformation of a paraboloidal membrane inflatable structure subjected to a concentrated load at its apex and a uniform internal pressure was analyzed. The wrinkle angle was obtained according to the m...The axisymmetric deformation of a paraboloidal membrane inflatable structure subjected to a concentrated load at its apex and a uniform internal pressure was analyzed. The wrinkle angle was obtained according to the membrane theory when wrinkles appeared and determined the wrinkle region. The wrinkled deformation was obtained based on the relaxed energy function. The effects of inflation pressure and concentrated loads on the wrinkle angle were analyzed and the deformation was obtained at the apex of structure. According to the numerical analysis, the shape of deformed meridians with wrinkles was obtained.展开更多
The roller-scraper tribosystem of automatic teller machine（ATM） plays an important role in reliable cash requests.However,the abrasive wear of the polymer tribosystem becomes a prominent problem when operating in sa...The roller-scraper tribosystem of automatic teller machine（ATM） plays an important role in reliable cash requests.However,the abrasive wear of the polymer tribosystem becomes a prominent problem when operating in sandy environment.The wear behavior of the tribosystem in a simulated sandy environment has been experimentally studied previously.However the abrasive wear mechanism of roller-scraper tribosystems is still unknown to new design.The wear rates of polymer rollers were examined comprehensively and several jumping variations were found in the full data extent.Three wear stages were classified by the magnitude of wear rates,and different dominant wear mechanisms corresponding with different particle diameter were found by examining the worn surfaces.Accordingly a presumption was proposed that wear mechanisms in different stages were correlated with sand particles of different diameter.In a verification experiment,three typical wear mechanisms including cutting,ploughing,and wedging were found corresponding with different wear stages by scanning electron microscope（SEM） examination.A theoretical analysis was carried out with a simplified sphere particle intrusion model and the transfer conditions for different wear mechanisms were studied referring to the slip-field theory.As a main result,three typical wear models versus friction coefficient of particle/roller,and particle radius were mapped with variant hardness of the polymer roller and ratio of contact shear stress to bulk shear stress.The result illuminated the abrasive wear mechanism during particle intrusion.Particularly,the critical transition conditions gave the basis for improving the wear performance of roller-scraper tribosystems in a sandy environment.展开更多
基金the Hubei Province Soft Science Project(No.2014BDH116)the 2015 Hubei Province Education Department of Humanities and Social Science Project(No.15G021)+1 种基金the China Logistics Association and the Ministry of Education Teaching Commission Project(Nos.2015CSLKT3-069 and JZW2015072)the WTO and Development of Hubei Research Center Project(No.W2015005)
文摘With the development that the demand for agricultural products' consumer market is gradually toward to the direction of complication, the existing agricultural logistics organizational model cannot adapt to the characteristics of agricultural product logistics and the changes in the consumer demand. According to the analysis of virtual operation trend of agricultural product logistics enterprise, this paper expatiates the concept and characteristics of agricultural product virtual logistics enterprise(APVLE) and proposes four steps to build an APVLE, including the analysis of key elements about APVLE, the identification about agricultural product logistics business, the project decomposition of APVLE and the partner selection in APVLE.
基金Project(2006CB600901)supported by the National Basic Research Program of ChinaProjects(50772134,50802115)supported by the National Natural Science Foundation of China
文摘To protect carbon materials from oxidation,SiC coatings were prepared on carbon/carbon(C/C)composites and graphite by chemical vapor reaction.SEM and XRD analyses show that the coatings obtained are composed of SiC grains and micro-crystals. The influence of different carbon substrates on oxidation behavior of coated samples was investigated,and then their oxidation mechanisms were studied.Oxidation test shows that the SiC coated graphite has a better oxidation resistance than SiC coated C/C composites at high temperatures(1 623 K and 1 823 K).In the oxidation process,the oxidation curves of SiC coated C/C composites are linear,while those of SiC coated graphite follow a quasi-parabolic manner.The oxidation mechanism of the former is controlled by chemical reaction while the latter is controlled by oxygen diffusion based on the experimental results.The variation of oxidation behavior and mechanism of SiC coatings on two kinds of carbon substrates are primarily contributed to their structure differences.
基金supported by National Basic Research Program of China (973 Program, Grant No. 2009CB724404)National Hitech Research and Development Program of China (863 Program, Grant No. 2006AA04Z431)National Natural Science Foundation of China (Grant No. 50905135)
文摘A newly developed on-line visual ferrograph（OLVF） gives a new way for engine wear state monitoring. However, the reliability of on-line wear debris image processing is challenged in both monitoring ship engines and the Caterpillar bench test, which weren＇t reported in previous studies. Two problems were encountered in monitoring engines and processing images. First, small wear debris becomes hard to be identified from the image background after monitoring for a period of time. Second, the identification accuracy for wear debris is greatly reduced by background noise because of oil getting dark after nmning a period of time. Therefore, the methods adopted in image processing are examined. Two main reasons for the problems in wear debris identification are generalized as follows. Generally, the binary threshold was determined by global image pixels, and was easily affected by the non-objective zone in the image. The boundary of the objective zone in the binary image was misrecognized because of oil color becoming lighter during monitoring. Accordingly, improvements were made as follows. The objective zone in a global binary image was identified by scanning a column of pixels, and then a secondary binary process confined in the objective zone was carried out to identify small wear debris. Linear filtering with a specific template was used to depress noise in a binary image, and then a low-pass filtering was performed to eliminate the residual noise. Furthermore, the morphology parameters of single wear debris were extracted by separating each wear debris by a gray stack, and two indexes, WRWR （relative wear rate） and WRWS （relative wear severity）, were proposed for wear description. New indexes were provided for on-line monitoring of engines.
基金supported by the National Natural Sci-ence Foundation of China (No. 50908185)the National Program of Water Pollution Control (No. 2008ZX07317-004)+2 种基金the Basic Research Foundation of Xi’an University of Architecture and Technology (No. JC0910)the Research Foundation for Talented Scholars of Xi’an University of Architecture and Technology (No. RC0824)the Program for Changjiang Scholars and Innovative Research Team in University (No. IRT0853)
文摘In order to realize simultaneous quantitative detection of various enteroviruses from water samples, a real-time reverse transcriptionpolymerase chain reaction （real-time RT-PCR） method was developed with universal primer pairs designed based on the highly conserved non-coding region sequences of genome targeting poliovirus, coxsackievirus and enterovirus 71. The recombinant plasmid was constructed as enterovirus DNA standard by cloning poliovirus cDNA into a pMD18-T vector. The real-time RT-PCR method utilizing SYBR Green I was optimized. As a result of a series of examinations, the detection limit of the method was found to be 2.31 genome equivalent copy （GEC）/μL, the intraand inter-assay variations were lower than 2% and 5%, respectively, and enteroviruses were well distinguished from other microorganisms. There was a good linear relationship （r 2 = 0.997） between the logarithm of viral density and cycle threshold in a wide range of 2.31 × 10 0 to 2.31 × 10 9 GEC/μL. The validity of the method was further proved by its application for the detection of enteroviruses from various practical water samples.
基金Project(2006CB600901) supported by the National Basic Research Program of ChinaProject(50802115) supported by the National Natural Science Foundation of China
文摘To protect carbon/carbon (C/C) composites from oxidation, a SiC coating modified with SiO2 was prepared by a complex technology. The inner SiC coating with thickness varying from 150 to 300 μm was initially coated by chemical vapor reaction (CVR): a simple and cheap technique to prepare the SiC coating via siliconizing the substrate that was exposed to the mixed vapor (Si and SiO2) at high temperatures (1 923?2 273 K). Then the as-prepared coating was processed by a dipping and drying procedure with tetraethoxysilane as source materials to form SiO2 to fill the cracks and holes. Oxidation tests show that, after oxidation in air at 1 623 K for 10 h and thermal cycling between 1 623 K and room temperature 5 times, the mass loss of the CVR coated sample is up to 18.21%, while the sample coated with modified coating is only 5.96%, exhibiting an obvious improvement of oxidation and thermal shock resistance of the coating. The mass loss of the modified sample is mainly contributed to the reaction of C/C substrate with oxygen diffusing through the penetrating cracks formed in thermal shock tests.
基金supported by the National Natural Science Foundation of China under grant Nos. 50772134 and 50802115the National Basic Research Program of China ("973 Program") under grant No. 2006CB600901
文摘Oxidation protective MoSi2-MosSi3/SiC multi-coatings for carbon/carbon composites were prepared by chemical vapor reaction and slurry-sintering method. The influence of preparation technology on the structure and phase composition of the coating was investigated by scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS） and X-ray diffraction （XRD） analyses, and then their relationship was discussed. The results indicate that the Si/Mo ratio of the slurry and sintering processing were two main factors that significantly affected the structure and phase composition of the multi-coating. Appropriate sintering process and relatively high Si/Mo ratio were essential for preparing the multi-coating with dense structure and favorable phase composition. After being sintered at 1723 K for 2 h and with the Si/Mo ratio of the slurry being 4.5 （weight ratio）, a dense structure accompanied by favorable phase composition of the coating can be obtained. When heat treated at 2373 K for I h, this coating became more compact and continuous. Oxidation tests （performed at 1623 and 1823 K） demonstrated that both of these two obtained multi-coatings exhibited better anti-oxidation property than single layer SiC coating.
基金jointly supported by the National Nature Science Foundation of China(No.41402095)the Chinese Postdoctoral Science Foundation(No.2014M550380)+1 种基金National Nature Science Foundation of China(No.U1262203)the Special Foundation of Postdoctoral Innovation Project of Shandong Province
文摘A large quantity of drilling core, paleontology, geochemistry and geophysics data revealed several features of the Jiyang subbasin during the deposition of the Ekl-ES4x members： （1） the paleotopography of the gentle slope belt had an extremely low gradient; （2） the paleoclimate frequently alternated between dry and wet periods in a generally arid setting; （3） there was strong weathering around the periphery of the basin; （4） the lake was very shallow; （5） the lake level frequently rose and fell; and （6） the sedimentary environment of the gentle slope belt was an over- flooding lake. All of these factors provided favorable geological conditions for the development of an over-flooding lake delta. The lithologies of the continental over-flooding lake delta deposits are complex and diverse. The compositional maturity is moderate to low, and the grain size distribution curves and sedimentary structures indicate the presence of both gravity and traction currents. The sedimentary microfacies associations consist of a combination of ordered superposition of flood channels, distributary channels and sheet sands. The delta exhibits a weak foreset seismic reflection. The over-flooding lake delta deposits are laterally extensive. The sandstone content is high, and the individual sandstone beds are thin. The flood channel and distributary channel deposits exhibit evidence of bifurcation and lateral migration. The distribution of the sandbodies and the oxidation color of the mudstones provide evidence of cyclic deposition. The paleoclimate was the dominant factor controlling the development of the over-flooding lake delta. Due to the frequently alternating wet and dry paleoclimates, the over-flooding lake delta is characterized by the development of a broad upper plain and a lower delta plain. The upper delta plain is characterized by flood channel deposits, whereas the lower delta plain is represented by distributary channel deposits. The transition zone is characterized by the interaction of flood channels and distributary channels. Due to fault activity, the sandbodies of the over-flooding lake delta were juxtaposed against hydrocarbon source rocks, which was favorable for the development of lithologic reservoirs or structural-lithologic reservoirs. The lower delta plain deposits comprise the most favorable reservoirs.
基金This work was supported by the National Natural Science Foundation of China (Nos. 5157-4139 and 5180-4247)De Montfort University through its distinguished Vice-Chancellor 2020 ProgrammeUK Science and Technology Facilities Council (STFC) through Batteries Early Career Researcher Award.
文摘In underground mines, high air temperatures in the summer months lead to an increase in inlet airflow temperatures. This leads to seasonal thermal pollution in the mines. This paper examines the dynamics and effects of seasonal variation in surface air temperatures and surrounding rock temperatures in deep coal mines. It also examines temperature variations in the main ventilation circuit, working face, and surrounding rock. The study results revealed that airflow temperatures were significantly affected by seasonal air temperature variations. The greater the distance was between the inlet and the wellhead of the ventilation shaft, the less the effect was on temperature. Moreover, slight temperature variations (1.0-3.0 ℃) were observed between various points on the return route during the summer months. Airflow temperatures along the airflow inlet to the return route of the working face first decreased, but then increased. The temperature field of the surrounding rock increased gradually with increased distance between the mine roadway and inlet, with recorded rock temperatures as high as 40.53 ℃. The radius of the heat-adjusting layer was between 28 and 33 m.
基金supported by the open fund of Key Laboratory of Sedimentary Basin and Oil and Gas Resources,Ministry of Land and Resources(China)(NO. zdsys2015002)
文摘The algal dolostone of the Upper Sinian Dengying Formation （corresponding to the Ediacaran system） in the Upper Yangtze Platform of China possesses a rich diversity of microorganisms and is an ideal site for the study of ancient microbial dolomite. We focused on algal dolostone and its microbial dolomite in the Hanyuan area of Sichuan Province, China. The macroscopic petrological features, microscopic morphology, texture characteristics of the fossil microorganisms and microbial dolomite, and geochemical characteristics were investigated. We found rich fossil microorganisms and microbial dolomites in the laminated, stromatolithic, uniform and clotted （algal） dolostones. The microorganisms present were mainly body fossils of cyanobacteria （including Renalcis, Girvanella, Nanococcus, and Epiphyton） and their trace fossils （including microbial mats （biofilms）, algal traces, and spots）. In addition, there was evidence of sulfate-reducing bacteria （SRB）, moderately halophilic aerobic bacteria, and red algae. The microbial dolomites presented cryptocrystalline textures under polarizing microscope and nanometer-sized granular （including spherulitic and pene-cubical granular） and （sub） micron-sized sheet-like, irregular, spherical and ovoidal morphologies under scanning electron microscope （SEM）. The microbial dolomites were formed by microbialiy induced mineralization in the intertidal zone and lagoon environments during the depositional and syngenetic stages and microbially influenced mineralization in the supratidal zone environment during the penecontemporaneous stage. The microbial metabolic activities and extracellular polymeric substances （EPS） determined the morphology and element composition of microbial dolomite. During the depositional and syngenetic stages, the metabolic activities of cyanobacteria and SRB were active and EPS, biofilms and microbial mats were well-developed. EPS provided a large number of nucleation sites. Accordingly, many nanometer-sized pene-cubical granular and （sub） micron-sized sheet-like microbial dolomites were formed. During the penecontemporaneous stage, SBR, cyanobacteria, and moderately halophilic aerobic bacteria were inactive. Furthermore, nucleation sites reduced significantly and were derived from both the EPS of surviving microorganisms and un-hydrolyzed EPS from dead microorganisms. Consequently the microbial dolomites present nanometer-sized spherulitic and micron-sized irregular, spherical, and ovoidal morphologies. Overall, the microbial dolomites evolved from nanometer-sized granular （including spherulitic and pene-cubical granular） dolomites to （sub） micron-sized sheet-like, irregular, spherical and ovoidal dolomites, and then to macroscopic laminated, stromatolithic, uniform, and clotted dolostones. These findings reveal the correlation between morphological evolution of microbial dolomite and microbial activities showing the complexity and diversity of mineral （dolomite）-microbe interactions, and providing new insight into microbial biomineralization and microbial dolomite in the Precambrian era.
基金Projects(2012zzts019,2012QNZT048)supported by the Fundamental Research Funds for the Central Universities of Central South University,ChinaProject(201306370121)supported by the State Scholarship Fund of China+3 种基金Project(JT20090898002)supported by Traffic Technology Fund of Hainan Province,ChinaProject(2012M521563)supported by the China Postdoctoral Science FoundationProject(51248006)supported by The National Natural Science Foundation of ChinaProject(511114)supported by the Natural Science Foundation of Hainan Province,China
文摘In order to simplify the boundary conditions of pavement temperature field,the "Environment-Surface" system which considered the natural environment and pavement surface was established.Based on this system,the partial differential equations of the one-dimensional heat conduction in the pavement were established on the basis of the heat transfer theory.Furthermore,the function forms of the initial and boundary conditions of the equations were created through the field experiments.The general solution of the pavement one-dimensional heat conduction partial differential equations was acquired by using Green's function,and the explicit expression of pavement temperature field under specific constraint conditions was derived.For the purpose of analysis,the pavement temperatures in different seasons were calculated using the explicit expression of pavement temperature field,and the calculation accuracy was analyzed through the comparison between measured and calculated values.Then,the relationship between fitting accuracy and calculation accuracy of pavement temperatures was analyzed.The analysis results show that: the usage of "Environment-Surface" system simplifies the calculation of pavement temperature field; the relative error between calculated and measured values is generally less than 7% and is seldom influenced by seasons; there is a positive correlation between the calculation accuracy and the fitting accuracy of pavement surface temperature; high fitting accuracy would result in less error of pavement temperature prediction.
基金supported by the Program for Changjiang Scholars and Innovative Research Team in University (IRT1078)the Key Program of NSFC-Guangdong Union Foundation (U1135002)+3 种基金the Major national S&T program(2012ZX03002003)the Fundamental Research Funds for the Central Universities(JY10000903001)the National Natural Sci ence Foundation of China (Grant No. 61363068, 61100233)the Natural Science Foundation of Shaanxi Province (Grant No. 2012JM8030, 2011JQ8003)
文摘In the harsh environment where n ode density is sparse, the slow-moving nodes cannot effectively utilize the encountering opportunities to realize the self-organized identity authentications, and do not have the chance to join the network routing. However, considering m ost of the communications in opportunistic networks are caused by forwarding operations, there is no need to establish the complete mutual authentications for each conversation. Accordingly, a novel trust management scheme is presented based on the information of behavior feedback, in order to complement the insufficiency of identity authentications. By utilizing the certificate chains based on social attributes, the mobile nodes build the local certificate graphs gradually to realize the web of "Identity Trust" relationship. Meanwhile, the successors generate Verified Feedback Packets for each positive behavior, and consequently the "Behavior Trust" relationship is formed for slow-moving nodes. Simulation result shows that, by implementing our trust scheme, the d elivery probability and trust reconstruction ratio can be effectively improved when there are large numbers of compromised nodes, and it means that our trust management scheme can efficiently explore and filter the trust nodes for secure forwarding in opportunistic networks.
文摘This study investigates the relationship among pollutant emissions,energy consumption and economic development in China during the period 1982-2007 by using a one-step GMM-system model under a multivariable panel VAR framework,controlling for capital stock and labor force.Regarding the data for all 28 provinces as a whole,we find that there is a unidirectional positive relationship running from pollutant emission to economic development and a unidirectional negative relationship between pollutant emission and energy consumption.Based on traditional economic planning,the panel data of28 provinces are divided into two cross-province groups.It is discovered that in the eastern coastal region of China,there is only a unidirectional positive causal relationship leading from economic development to pollutant emission;while in the central and western regions,there are the unidirectional Granger causal relationships between pollutant emission and energy consumption,as well as between pollutant emission and economic development.There is also a unique unidirectional causal relationship running from economic development to energy consumption,which does not appear in the eastem coastal region or in China as a whole.
基金Sponsored by Specialized Research Fund for the Doctoral Program of Higher Education (Grant No. 20122301120004)China Postdoctoral Science Foundation (Grant No. 2012M520778)+2 种基金Heilongjiang Province Postdoctoral Science Foundation (Grant No. LBH-Z12217)Research Foundation of Education Bureau of Heilongjiang Provincethe Youth Science Fund Project of Heilongjiang University (Grant No. QL201110)
文摘A critical challenge for mobile ad hoc networks is the design of efficient routing protocols which are able to provide high bandwidth utilization and desired fairness in mobile wireless environment without any fixed communication establishments. Although extensive efforts have already been devoted to providing optimization based distributed congestion elusion strategy for efficient bandwidth utilization and fair allocation in both wired and wireless networks,a common assumption therein is the fixed link capacities,which will unfortunately limit the application scope in mobile ad hoc networks where channels keep changing. In this paper,an effective congestion elusion strategy is presented explicitly based on ant colony algorithm for mobile ad hoc networks, which will explore the optimal route between two nodes promptly,meanwhile forecast congestion state of the link. Accordingly,a new path will be found rapidly to have the flow spread around to relieve the congestion degree. Compared with OLSR,the strategy proposed will greatly reduce the packet loss ratio and the average end-to-end delay at the same time,which illustrate that it will make use of networking resource effectively.
基金National Natural Science Foundation of China,Grant/Award Numbers:51608521,52178375Fundamental Research Funds for the Central Universities,Grant/Award Number:2022YQLJ01Major Achievements Transformation and Industrialization Projects of Central Universities in Beijing,Grant/Award Number:ZDZH20141141301。
文摘Tool wear is a noteworthy problem in the process of shield tunneling,and the degree of wear varies with stratum.The sand-pebble strata in Beijing are typically mechanically unstable.However,many subways are buried wholly or partially in sand-pebble strata.Taking the Beijing New Airport line tunneling project as research background,this study evaluated the wear characteristics of the multiconfiguration rippers of a 9-m-diameter spoke-type shield tunneling machine in a sand-pebble stratum.The wear values of five ripper teeth and ripper flanks were analyzed based on field-measured data from the Beijing New Airport line project.As the analytical results show,the wear value generally increases as the installation radius enlarges with the rise of cutting trace length.The wear of the 190-rippers was divided into five categories:pedestal wear,ripper teeth collapse,uniform wear,ripper teeth falling off and ripper flank wear.Uniform wear of the ripper teeth and ripper flank wear were the two abrasion types of the 190-rippers.The teeth of the 155-rippers mostly maintained their cutting capacity under the protection of the 190-rippers.A wear prediction model of linear fitting field data was developed for a 190-ripper face to obtain the optimum shield driving distance in the sand-pebble stratum.The average wear coefficients of the 190-ripper before and after replacement matched well,being 0.045 and 0.066 mm/km,respectively.The results of this study provide a theoretical reference for tool wear prediction in shield construction under similar geological conditions.
基金Project(JSPS.KAKENHI22560451) supported by the Japan Society for the Promotion of ScienceProject(69904003) supported by the National Natural Science Foundation of ChinaProject(YJ0267016) supported by the Advanced Ordnance Research Supporting Fund of China
文摘Let P（s, δ） be a sphere plant family described by the transfer function set where the coefficients of the denominator and numerator polynomials are affine in a real uncertain parameter vector δ satisfying the Euclidean norm constraint ｜｜δ｜｜〈δ. The concept of stabilizability radius of P（s, δ） is introduced which is the norm bound δs for δ such that every member plant of P（s, δ） is stabilizable if and only if ｜｜δ｜｜〈δs. The stabilizability radius can be simply interpreted as the ＇largest sphere＇ around the nominal plant P（s,θ） such that P（s, δ） is stabilizable. The numerical method and the analytical method are presented to solve the stabilizability radius calculation problem of the sphere plants.
基金Supported by the National Natural Science Foundation of China(81571910)Science and Technology key Project of Guangdong province(2014B020212010)+1 种基金the National Key Research and Development Plan of China(2017YFC1103301)Medical Scientific Research Foundation of Guangdong Province of China(B2018026).
文摘The diabetic ulcer is one of the serious complications of diabetes.In this study,we aimed to establish an exosomal microRNA(miRNA)-targetedmessenger RNA(mRNA)regulatory network for screening new biomarkers for diabetic ulcer treatment.For this purpose,exosomes were extracted from bone marrow stem cells(BMSCs)collected from diabetic ulcer patients and healthy adults.The miRNAs in exosomes was detected by high-throughput sequencing analysis.The Gene Ontology(GO)and Kyoto Encyclopedia of Genes and Genomes(KEGG)pathway enrichment analysis of the differential miRNAs were performed.The miRNA-mRNA regulatory network between candidate miRNAs and their target genes were constructed by Cytoscape software basing on mRNA expression profiles data of diabetic ulcer patients from Gene Expression Omnibus(GEO).GO and KEGG analyses of the core genes were performed.A total of 63 differential expressed miRNAs in BMSCs exosomes were identified between diabetic ulcer patients and healthy adults.The GO analysis of miRNAs showed that it was mainly related to signal transduction and intercellular transport,and KEGG analysis showed that it was related to the vascular endothelial growth factor(VEGF)signaling pathway.The core genes of the miRNA-mRNA network were thioredoxin interacting protein(TXNIP),cell division cycle 14A(CDC14A),cache domain containing 1(CACHD1),interferon-induced protein 44 like(IFI44L),late cornified envelope 1AL(CE1A),leucine-rich repeats and immunoglobulin-like domains 2(LRIG2),palmdelphin(PALMD)and serine and arginine-rich splicing factor 11(SRSF11).GO analysis of the core genes was related to platelet-derived growth factor receptor signaling pathway.The KEGG analysis of the core genes was related to the cell cycle and nucleotide-binding oligomerization domain(NOD)-like receptor signaling pathway.A potential miRNA-mRNA regulatory network provides a comprehensive understanding of the molecular mechanisms and promising new targets such as miR-130a-5p,SESN2,LRIG2,and CDC14A for the wound repair of diabetic ulcers.
基金Supported by Post-doctoral Foundation Project of Heilongjiang Province(LBHZ16094)Special Research Fund Project for Scientific and Technological Innovation Talents in Harbin City(2017RAQXJ115)Doctoral Starting up Project of Harbin University of Commerce(2019DS114).
文摘[Objectives]To explore the stability of sanguinarine and chelerythrine in Macleaya cordata(Willd.)R.Br.[Methods]The solubility and stability of sanguinarine and chelerythrine in seven solvents were measured by HPLC.Besides,the effects of water quality,light source,oxidant,temperature,and pH on stability were investigated.[Results]The solubility and stability of sanguinarine and chelerythrine in methanol and ethanol are good;the stability of sanguinarine and chelerythrine in distilled water and rainwater is not affected by light and is very stable,but they are unstable in tap water whether they are protected from light or not;oxidants have a great influence on the stability of sanguinarine and chelerythrine;sanguinarine and chelerythrine are stable at room temperature lower than 54℃;sanguinarine is stable in pH 2.5-7.0,while chelerythrine is stable in pH 2.5-8.0.[Conclusions]The good stability of sanguinarine and chelerythrine under specific conditions shows that they have broad development prospects and value.
文摘The on-orhit transient temperature of reflector laminate film was analyzed by using finite element method （FEM）. Numerical simulation was used by FEM software ANSYS. Results reveal that the temperature levels of the laminate composite membrane alternate greatly in the orbital period, which is about±80℃. This range exceeds the material ＇ s operating temperature level. So it is necessary to put effective thermal control into effect to the laminate composite membrane. There is temperature gradient in the thickness direction of the laminate composite membrane; there is a light change in Kevlar/Epoxy layer. The temperature of the laminate composite membrane is obviously lower than the seam＇ s temperature. Results provide reference to the thermal control of the inflatable reflector with high precision requirement.
基金Sponsored by the Development Program for Outstanding Young Teachers in Harbin Institute of Technology(Grant No.HITQNJS.2008.004)the China Postdoctoral Science Foundation (Grant No.20070420163)Special Fund for Innovation Talents of Science and Technology in Harbin(Grant No.2008RFQXG057)
文摘The axisymmetric deformation of a paraboloidal membrane inflatable structure subjected to a concentrated load at its apex and a uniform internal pressure was analyzed. The wrinkle angle was obtained according to the membrane theory when wrinkles appeared and determined the wrinkle region. The wrinkled deformation was obtained based on the relaxed energy function. The effects of inflation pressure and concentrated loads on the wrinkle angle were analyzed and the deformation was obtained at the apex of structure. According to the numerical analysis, the shape of deformed meridians with wrinkles was obtained.
基金supported by National Natural Science Foundation of China (Grant No. 50905135)National Basic Research Program of China (973 Program, Grant No. 2009CB724404)+1 种基金Key Program of National Natural Science Foundation of China (Grant No. 50935004)China Postdoctoral Science Foundation (Grant No. 201003672)
文摘The roller-scraper tribosystem of automatic teller machine（ATM） plays an important role in reliable cash requests.However,the abrasive wear of the polymer tribosystem becomes a prominent problem when operating in sandy environment.The wear behavior of the tribosystem in a simulated sandy environment has been experimentally studied previously.However the abrasive wear mechanism of roller-scraper tribosystems is still unknown to new design.The wear rates of polymer rollers were examined comprehensively and several jumping variations were found in the full data extent.Three wear stages were classified by the magnitude of wear rates,and different dominant wear mechanisms corresponding with different particle diameter were found by examining the worn surfaces.Accordingly a presumption was proposed that wear mechanisms in different stages were correlated with sand particles of different diameter.In a verification experiment,three typical wear mechanisms including cutting,ploughing,and wedging were found corresponding with different wear stages by scanning electron microscope（SEM） examination.A theoretical analysis was carried out with a simplified sphere particle intrusion model and the transfer conditions for different wear mechanisms were studied referring to the slip-field theory.As a main result,three typical wear models versus friction coefficient of particle/roller,and particle radius were mapped with variant hardness of the polymer roller and ratio of contact shear stress to bulk shear stress.The result illuminated the abrasive wear mechanism during particle intrusion.Particularly,the critical transition conditions gave the basis for improving the wear performance of roller-scraper tribosystems in a sandy environment.
