Casing deformation is a widespread problem in a certain block of Jiaoshiba Shale Gas Field in Sichuan Basin,China,and it severely limits the development benefits of shale gas in that block.Based on the spatiotemporal ...Casing deformation is a widespread problem in a certain block of Jiaoshiba Shale Gas Field in Sichuan Basin,China,and it severely limits the development benefits of shale gas in that block.Based on the spatiotemporal characteristics of block formation,fracture development,and casing deformation occurrence,this paper employs an integrated geological—engineering research approach to identify the primary mechanisms governing casing deformation within the block and proposes countermeasures to prevent such deformation.The present research indicates the following findings:(1)The block has undergone multiple phases of tectonic superposition,with fracture development serving as the geological factor causing casing deformation.(2)Fracturing activation constitutes the engineering factor causing casing deformation,with 4 mm of formation slip inducing deformation.(3)The fracture activation risk map shows that Class Ⅰ and Class Ⅱ fractures account for 73.36%of the total recorded in the block.Within the most susceptible Class I risk zone,the critical activation pressure increment for fracturing operations ranges from 13.43 MPa to 13.99 MPa.Based on the distribution of casing failure risk zones identified in the fracture activation risk map,this paper proposes relevant technical countermeasures for preventing casing failure from three perspectives:shale gas well location deployment,drilling techniques,and fracturing techniques.These measures provide robust support for safeguarding the integrity of casing systems within the studied block.展开更多
Oxygen-reducing air flooding is a low-permeability reservoir recovery technology with safety and low-cost advantages.However,in the process of air injection and drive,carbon in the air is oxidized through the crude oi...Oxygen-reducing air flooding is a low-permeability reservoir recovery technology with safety and low-cost advantages.However,in the process of air injection and drive,carbon in the air is oxidized through the crude oil reservoir to generate CO_(2),and this can cause serious corrosion in the recovery well.In this study,experiments on the corrosion of J55 tubular steel in a fluid environment with coexisting O_(2)and CO_(2)in an autoclave are presented.In particular,a weight loss method and a 3D morphometer were used to determine the average and the local corrosion rate.The corrosion surface morphology and composition were also measured by means of scanning electron microscopy(SEM)and an X-ray diffractometer(XRD).The corrosion pattern and morphological characteristics of J55 steel were analyzed in the O2/CO_(2)environment for different degrees of oxygen-reduction.As made evident by the experimental results,the corrosion products were mainly ferrous carbonate and iron oxide.In general,air injection increases the degree of oxygen reduction,from oxygen corrosion characteristics to CO_(2)corrosion-based characteristics.As a result,the corrosion product film becomes denser,and the corrosion rate is lower.展开更多
Erosion wear is a common failure mode in the oil and gas industry.In the hydraulic fracturing,the fracturing pipes are not only in high-pressure working environment,but also suffer from the impact of the high-speed so...Erosion wear is a common failure mode in the oil and gas industry.In the hydraulic fracturing,the fracturing pipes are not only in high-pressure working environment,but also suffer from the impact of the high-speed solid particles in the fracturing fluid.Beneath such complex conditions,the vulnerable components of the pipe system are prone to perforation or even burst accidents,which has become one of the most serious risks at the fracturing site.Unfortunately,it is not yet fully understood the erosion mechanism of pipe steel for hydraulic fracturing.Therefore,this article provides a detailed analysis of the erosion behavior of fracturing pipes under complex working conditions based on experiments and numerical simulations.Firstly,we conducted erosion experiments on AISI 4135 steel for fracturing pipes to investigate the erosion characteristics of the material.The effects of impact angle,flow velocity and applied stress on erosion wear were comprehensively considered.Then a particle impact dynamic model of erosion wear was developed based on the experimental parameters,and the evolution process of particle erosion under different impact angles,impact velocities and applied stress was analyzed.By combining the erosion characteristics,the micro-structure of the eroded area,and the micro-mechanics of erosion damage,the erosion mechanism of pipe steel under fracturing conditions was studied in detail for the first time.Under high-pressure operating conditions,it was demonstrated through experiments and numerical simulations that the size of the micro-defects in the eroded area increased as the applied stress increased,resulting in more severe erosion wear of fracturing pipes.展开更多
At present, the layering technology of water injection wells in Shengli Offshore Oilfield suffers from poor sealing, wear and tear of rubber parts, and corrosion and perforation of tubing, which seriously affect the n...At present, the layering technology of water injection wells in Shengli Offshore Oilfield suffers from poor sealing, wear and tear of rubber parts, and corrosion and perforation of tubing, which seriously affect the normal production of oil wells. To this end, the efficient stratification technology of water injection wells is studied, which has the control of all hydraulic control systems in addition to the water distributor. Hydraulic control washable annular safety packer, one-time pressure, permanent locking;hydraulic control forcibly opens and closes the well washing channel to avoid polluting the marine ecological environment. The double-sealing structure design of the hydraulic-controlled repeating packer effectively expands the axial sealing area. The hydraulically controlled two-way well flushing valve realizes forward and reverse well flushing and improves well flushing efficiency. The connection between the hydraulic control system and the ground hydraulic control cabinet realizes the remote control of the underground hydraulic control tool by the office computer terminal system, reduces the labor intensity of post-maintenance, and solves the problem of operating safety for on-site personnel. By the end of 2020, the high-efficiency stratification technology of water injection wells had been applied in more than 140 wells in Chengdao Oilfield, and the longest validity period had reached 7.6 years. The overall practical life of the pipe string could effectively meet the 5-year efficient development requirements.展开更多
CO_(2)flooding enhanced oil recovery(CO_(2)-EOR)represents a significant technology in the low permeability reservoir.With the fractures and heterogeneity in low permeability reservoirs,CO_(2)-EOR is susceptible to pe...CO_(2)flooding enhanced oil recovery(CO_(2)-EOR)represents a significant technology in the low permeability reservoir.With the fractures and heterogeneity in low permeability reservoirs,CO_(2)-EOR is susceptible to pessimistic gas channeling.Consequently,there is a need to develop conformance control materials that can be used in CO_(2)-EOR.Herein,to address the challenges of low strength and poor stability of polymer gel in high temperature and low permeability reservoirs,a new organic/metal ion composite crosslinking polymer gel(AR-Gel)is reported,which is formed by low hydrolysis and medium to high molecular weight polymer(CX-305),organic crosslinking agent(phenolic resin),and aluminium citrate(AI(Ⅲ)).The crosslinking of AI(Ⅲ)with carboxyl group and organic/metal ion double crosslinking can construct a more complex and stable polymer gel structure on the basis of traditional chemical crosslinking,to cope with the harsh conditions such as high temperature.The structure-activity relationship of AR-Gel was revealed by rheology behavior and micro-morphology.The applicability of AR-Gel in reservoir was investigated,as was its strength and stability in supercritical CO_(2).The anti-gas channeling and enhanced oil recovery of AR-Gel were investigated using low permeability fractured cores,and the field process parameters were provided.The gel can be used to meet supercritical CO_(2)reservoirs at 110℃and 20,000 mg/L salinity,with long-term stability over 60 days.The plugging rate of AR-Gel for fractured co re was 97%,with subsequent CO_(2)flooding re sulting in an enhanced oil recovery by 34.5%.ARGel can effectively control CO_(2)gas channeling and enhanced oil recovery.It offers a new material with high strength and temperature resistance,which is particularly beneficial in the CO_(2)flooding for the conformance control of oil field.展开更多
Casing damage resulting from sand production in unconsolidated sandstone reservoirs can significantly impact the average production of oil wells.However,the prediction task remains challenging due to the complex damag...Casing damage resulting from sand production in unconsolidated sandstone reservoirs can significantly impact the average production of oil wells.However,the prediction task remains challenging due to the complex damage mechanism caused by sand production.This paper presents an innovative approach that combines feature selection(FS)with boosting algorithms to accurately predict casing damage in unconsolidated sandstone reservoirs.A novel TriScore FS technique is developed,combining mRMR,Random Forest,and F-test.The approach integrates three distinct feature selection approaches—TriScore,wrapper,and hybrid TriScore-wrapper and four interpretable Boosting models(AdaBoost,XGBoost,LightGBM,CatBoost).Moreover,shapley additive explanations(SHAP)was used to identify the most significant features across engineering,geological,and production features.The CatBoost model,using the Hybrid TriScore-rapper G_(1)G_(2)FS method,showed exceptional performance in analyzing data from the Gangxi Oilfield.It achieved the highestaccuracy(95.5%)and recall rate(89.7%)compared to other tested models.Casing service time,casing wall thickness,and perforation density were selected as the top three most important features.This framework enhances predictive robustness and is an effective tool for policymakers and energy analysts,confirming its capability to deliver reliable casing damage forecasts.展开更多
During oil displacement,surfactants often encounter challenges such as emulsion instability and channeling,which can compromise their efficiency.To address these issues,polymer microspheres were synthesized via revers...During oil displacement,surfactants often encounter challenges such as emulsion instability and channeling,which can compromise their efficiency.To address these issues,polymer microspheres were synthesized via reverse microemulsion polymerization using acrylamide,2-methyl-2-acrylamidopropane sulfonic acid,and stearyl methacrylate as monomers,with N,N-methylenebisacrylamide as the crosslinker.The microspheres were then combined with sodium alkyl alcohol polyoxyethylene ether carboxylate to enhance emulsion stability and expand the swept volume of surfactant.A stable reverse microemulsion system was prepared using the maximum water solubilization rate as the indicator,and microspheres were synthesized based on this system.The ability of the microspheres to enhance emulsion stability was systematically evaluated.The plugging performance and enhanced oil recovery(EOR)efficiency of the microsphere/surfactant composite system were assessed through core seepage and oil displacement experiments.The experimental results demonstrated that microspheres were successfully prepared in a water-in-oil reverse microemulsion system with a solubilization rate of 42%.The emulsion stability was evaluated under an oil-to-water ratio of 7:3,a temperature of 80℃,and a salinity of 44,592 mg/L,by manually shaking the test tube five times.It was observed that the complete phase separation time of the emulsion increased from 10 to 120 min after the addition of microspheres.Under different permeability conditions(100×10^(-3),300×10^(-3),500×10^(-3)μm^(2)),the recovery efficiency of the composite system increased by 4.5%,8.3%,and 4.8%,respectively,compared to a single surfactant system.The microspheres developed in this study enhanced emulsion stability and increased the swept volume of surfactant within the formation,significantly boosting its oil recovery efficiency.展开更多
In this work,the factors affecting asphaltenes deposition in high-temperature and high-pressure wells were studied using backscattered light and PVT equipment customized to suit the well conditions.In an examination o...In this work,the factors affecting asphaltenes deposition in high-temperature and high-pressure wells were studied using backscattered light and PVT equipment customized to suit the well conditions.In an examination of the intensity of backscattered light,it was revealed that there exists a linear relationship between temperature and asphaltene precipitation within a specific temperature range.Within this range,a decrease in temperature tends to accelerate asphaltene precipitation.However,the impacts of pressure and gas-oil ratio are more pronounced.The pressure depletion induces the asphaltenes to precipitate out of the solution,followed by the formation of flocs below the bubble point.In addition,an increase in the gas-oil ratio causes a more severe asphaltene deposition,shifting the location of asphaltenes to deep well sections.展开更多
To investigate the height growth of multi-cluster fractures during variable fluid-viscosity fracturing in a layered shale oil reservoir,a two-dimensional finite element method(FEM)-discrete fracture network(DFN)model ...To investigate the height growth of multi-cluster fractures during variable fluid-viscosity fracturing in a layered shale oil reservoir,a two-dimensional finite element method(FEM)-discrete fracture network(DFN)model coupled with flow,stress and damage is proposed.A traction-separation law is used to describe the mixed-mode response of the damaged adhesive fractures,and the cubic law is used to describe the fluid flow within the fractures.The rock deformation is controlled by the in-situ stress,fracture cohesion and fluid pressure on the hydraulic fracture surface.The coupled finite element equations are solved by the explicit time difference method.The effects of the fracturing treatment parameters including fluid viscosity,pumping rate and cluster spacing on the geometries of multifractures are investigated.The results show that variable fluid-viscosity injection can improve the complexity of the fracture network and height of the main fractures simultaneously.The pumping rate of15 m^(3)/min,variable fluid-viscosity of 3-9-21-36-45 mPa s with a cluster spacing of 7.5 m is the ideal treatment strategy.The field application shows that the peak daily production of the application well with the optimized injection procedu re of variable fluid-viscosity fracturing is 171 tons(about 2.85 times that of the adjacent well),which is the highest daily production record of a single shale oil well in China,marking a strategic breakthrough of commercial shale oil production in the Jiyang Depression,Shengli Oilfield.The variable fluid-viscosity fracturing technique is proved to be very effective for improving shale oil production.展开更多
Abrasive waterjet(AWJ)fracturing has become an accepted horizontal multistage stimulation technique due to its flexibility and high efficiency of extensive fracture placement.The downhole tool failure of AWJ fracturin...Abrasive waterjet(AWJ)fracturing has become an accepted horizontal multistage stimulation technique due to its flexibility and high efficiency of extensive fracture placement.The downhole tool failure of AWJ fracturing becomes an issue in the massive hydraulic fracturing because of high velocity and proppant erosion.This paper proposed a 3D computational fluid dynamics(CFD)-based erosion model by considering high-velocity waterjet impact,proppant shear erosion,and specific inner structure of hydra-jet tool body.The discrete phase approach was used to track the proppant transport and its concentration distribution.Field observation provides strong evidence of erosion patterns and mechanisms obtained from CFD simulation.The results show that the erosion rate has a space dependence in the inner wall of the tool body.The severe erosion areas are primarily located at the entries of the nozzle.Evident erosion patterns are found including a‘Rabbit’s ear’erosion at the upper-layer nozzles and a half bottom loop erosion at the lower-layer nozzles.Erosion mechanisms attribute to high flow velocity at the entry of nozzles and the inertia force of proppant.Sensitivity analysis demonstrates that the pumping rate is a primary factor contributing to erosion intensity.展开更多
Application of light-weight drilling fluids is essential to develop depleted hydrocarbon reservoirs.Recently,colloidal gas aphron(CGA)-based fluids have been introduced for such applications due to their ability in co...Application of light-weight drilling fluids is essential to develop depleted hydrocarbon reservoirs.Recently,colloidal gas aphron(CGA)-based fluids have been introduced for such applications due to their ability in controlling fluid losses.In this work,a comprehensive experimental study was performed to choose the best formulation for CGA fluids by implementing static stability tests,rheological behavior measurements,and bubble size analyses of CGAs.Xanthan gum polymer and sodium dodecyl benzene sulfonate(SDBS),an anionic surfactant,and cetyl trimethyl ammonium bromide(CTAB),a cationic surfactant,were utilized to prepare CGAs.For the range of experiments conducted,the performance of CGA fluids prepared with SDBS was improved by increasing the polymer and surfactant concentrations.However,for CTAB,it was improved by an increase in the polymer concentration and a decrease in the surfactant concentration.The formation of white,long hair-like precipitates observed at high levels of CTAB caused CGA fluid to become rapidly unstable.Also,it was observed that the size of CGAs was significantly influenced by the polymer and surfactant concentrations.The most stable bubbles were formed at 6.86 g/L of polymer concentration.The results of this study provide insights into appropriate formulation for CGA-based fluids which could be potentially applicable in drilling operations.展开更多
The application of nanoparticles(NPs) in enhanced oil recovery(EOR) offers a practical approach to resolving some surface-related problems encountered in contemporary technological processes. In this study, graphene o...The application of nanoparticles(NPs) in enhanced oil recovery(EOR) offers a practical approach to resolving some surface-related problems encountered in contemporary technological processes. In this study, graphene oxide nanosheets(GONs) were synthesized by Hummer's method and, then, were subjected to surface modification by hexamethyldisilazane(HMDS) and diazonium sulfonic(DS) compounds. The new combination was known as GO-Su-HMDS. The potential stability of GO-Su-HMDS nanofluids(NFs) was investigated using the zeta(ζ) potential test. A comparative study of the effect of the synthesized NFs on wettability alteration of the reservoir rock was performed using interfacial tension(IFT) and contact angle experiments. According to the results of this study, the contact angle decreased from the initial value of 161.(oil wet) to 35.(water wet). In addition, IFT decreased from18.45 mN/m for deionized(DI) water to 8.8 mN/m for 500 ppm GO-Su-HMDS NF. Moreover, the results of flooding experiments showed that the NPs of a GO-Su-HMDS concentration of 400 and 500 ppm could increase the oil recovery by 20% and 19%, respectively. The experimental results showed that GO-SuHMDS NFs with a concentration of 500 ppm have the best efficiency in terms of altering the wettability of the rock from oil wet to water wet. Thus, it can be said that this nanofluid can reduce the contact angle and IFT and also increase the sweeping efficiency of oil.展开更多
The mechanically choked orifice plate (MCOP) is a new type of device for flow control by which choking conditionsfor incompressible fluids can be obtained with relatively small pressure losses. Given the lack of relev...The mechanically choked orifice plate (MCOP) is a new type of device for flow control by which choking conditionsfor incompressible fluids can be obtained with relatively small pressure losses. Given the lack of relevant results anddata in the literature, in the present study, we concentrate on the experimental determination of the flow coefficientfor the annular orifice, the pressure distribution in the MCOP, and the characteristics of the choked flow itself. Asconfirmed by the experimental results, the Reynolds number, the orifice plate thickness, the plug taper, and theeccentricity have an obvious influence on the aforementioned flow coefficient. The pressure drop in the MCOPis mainly generated near the orifice plate, and the pressure upstream of the orifice plate is slightly reduced in theflow direction, while the pressure downstream of the orifice plate displays a recovery trend. The choked flow rateof the MCOP can be adjusted by replacing the spring with a maximum flow control deviation of 4.91%.展开更多
The increasing energy demand has pushed oil and gas exploration and development limits to extremely challenging and harsher HTHP (High Temperature and High Pressure) environments. Maintaining wellbore integrity in the...The increasing energy demand has pushed oil and gas exploration and development limits to extremely challenging and harsher HTHP (High Temperature and High Pressure) environments. Maintaining wellbore integrity in these environments, particularly in HPHT reservoirs with corrosive gases, presents a significant challenge. Robust risk evaluation and mitigation strategies are required to address these reservoirs' safety, economic, and environmental uncertainties. This study investigates chemo-mechanical properties degradations of class G oil well cement blended with silica fume, liquid silica, and latex when exposed to high temperature (150 °C) and high partial pressure of CO_(2) saturated brine. The result shows that these admixtures surround the cement grains and fill the interstitial spaces between the cement particles to form a dense crystal system of C–S–H. Consequently, the cement's percentage of pore voids, permeability, and the content of alkali compounds reduce, resulting in increased resistance to CO_(2) corrosion. Liquid silica, a specially prepared silica suspension, is a more effective alternative to silica fume in protecting oil well cement against CO_(2) chemical degradation. Micro-indentation analysis shows a significant deterioration in the mechanical properties of the cement, including average elastic modulus and hardness, particularly in the outer zones in direct contact with corrosive fluids. This study highlights the significance of incorporating admixtures to mitigate the effects of CO_(2) corrosion in HPHT environments and provides a valuable technique for quantitatively evaluating the mechanical-chemical degradation of cement sheath.展开更多
Thermo-responsive nanocomposites have recently emerged as potential nanoplugging agents for shale stabilization in high-temperature water-based drilling fluids(WBDFs). However, their inhibitory properties have not bee...Thermo-responsive nanocomposites have recently emerged as potential nanoplugging agents for shale stabilization in high-temperature water-based drilling fluids(WBDFs). However, their inhibitory properties have not been very effective in high-temperature drilling operations. Thermo-responsive Janus nanocomposites are expected to strongly interact with clay particles from the inward hemisphere of nanomaterials, which drive the establishment of a tighter hydrophobic membrane over the shale surface at the outward hemisphere under geothermal conditions for shale stabilization. This work combines the synergistic benefits of thermo-responsive and zwitterionic nanomaterials to synchronously enhance the chemical inhibitions and plugging performances in shale under harsh conditions. A novel thermoresponsive Janus nanosilica(TRJS) exhibiting zwitterionic character was synthesized, characterized,and assessed as shale stabilizer for WBDFs at high temperatures. Compared to pristine nanosilica(Si NP)and symmetrical thermo-responsive nanosilica(TRS), TRJS exhibited anti-polyelectrolyte behaviour, in which electrolyte ions screened the electrostatic attraction between the charged particles, potentially stabilizing nanomaterial in hostile shaly environments(i.e., up to saturated brine or API brine). Macroscopically, TRJS exhibited higher chemical inhibition than Si NP and TRS in brine, prompting a better capability to control pressure penetration. TRJS adsorbed onto the clay surface via chemisorption and hydrogen bonding, and the interactions became substantial in brine, according to the results of electrophoretic mobility, surface wettability, and X-ray diffraction. Thus, contributing to the firm trapping of TRJS into the nanopore structure of the shale, triggering the formation of a tight hydrophobic membrane over the shale surface from the outward hemisphere. The addition of TRJS into WBDF had no deleterious effect on fluid properties after hot-treatment at 190℃, implying that TRJS could find potential use as a shale stabilizer in WBDFs in hostile environments.展开更多
In recent years,with the development of the social Internet of Things(IoT),all kinds of data accumulated on the network.These data,which contain a lot of social information and opinions.However,these data are rarely f...In recent years,with the development of the social Internet of Things(IoT),all kinds of data accumulated on the network.These data,which contain a lot of social information and opinions.However,these data are rarely fully analyzed,which is a major obstacle to the intelligent development of the social IoT.In this paper,we propose a sentence similarity analysis model to analyze the similarity in people’s opinions on hot topics in social media and news pages.Most of these data are unstructured or semi-structured sentences,so the accuracy of sentence similarity analysis largely determines the model’s performance.For the purpose of improving accuracy,we propose a novel method of sentence similarity computation to extract the syntactic and semantic information of the semi-structured and unstructured sentences.We mainly consider the subjects,predicates and objects of sentence pairs and use Stanford Parser to classify the dependency relation triples to calculate the syntactic and semantic similarity between two sentences.Finally,we verify the performance of the model with the Microsoft Research Paraphrase Corpus(MRPC),which consists of 4076 pairs of training sentences and 1725 pairs of test sentences,and most of the data came from the news of social data.Extensive simulations demonstrate that our method outperforms other state-of-the-art methods regarding the correlation coefficient and the mean deviation.展开更多
To fully exploit the technical advantages of the large-depth and high-precision artificial source electromagnetic method in the complex structure area of southern Sichuan and compensate for the shortcomings of the con...To fully exploit the technical advantages of the large-depth and high-precision artificial source electromagnetic method in the complex structure area of southern Sichuan and compensate for the shortcomings of the conventional electromagnetic method in exploration depth,precision,and accuracy,the large-depth and high-precision wide field electromagnetic method is applied to the complex structure test area of the Luochang syncline and Yuhe nose anticline in the southern Sichuan.The advantages of the wide field electromagnetic method in detecting deep,low-resistivity thin layers are demonstrated.First,on the basis of the analysis of physical property data,a geological–geoelectric model is established in the test area,and the wide field electromagnetic method is numerically simulated to analyze and evaluate the response characteristics of deep thin shale gas layers on wide field electromagnetic curves.Second,a wide field electromagnetic test is conducted in the complex structure area of southern Sichuan.After data processing and inversion imaging,apparent resistivity logging data are used for calibration to develop an apparent resistivity interpretation model suitable for the test area.On the basis of the results,the characteristics of the electrical structure change in the shallow longitudinal formation of 6 km are implemented,and the transverse electrical distribution characteristics of the deep shale gas layer are delineated.In the prediction area near the well,the subsequent data verification shows that the apparent resistivity obtained using the inversion of the wide field electromagnetic method is consistent with the trend of apparent resistivity revealed by logging,which proves that this method can effectively identify the weak response characteristics of deep shale gas formations in complex structural areas.This experiment,it is shown shows that the wide field electromagnetic method with a large depth and high precision can effectively characterize the electrical characteristics of deep,low-resistivity thin layers in complex structural areas,and a new set of low-cost evaluation technologies for shale gas target layers based on the wide field electromagnetic method is explored.展开更多
The research on the multiphase flow characteristics of hydrate slurry is the key to implementing the risk prevention and control technology of hydrate slurry in deep-water oil and gas mixed transportation system.This ...The research on the multiphase flow characteristics of hydrate slurry is the key to implementing the risk prevention and control technology of hydrate slurry in deep-water oil and gas mixed transportation system.This paper established a geometric model based on the high-pressure hydrate slurry experimental loop.The model was used to carry out simulation research on the flow characteristics of gas-liquid-solid three-phase flow.The specific research is as follows:Firstly,the effects of factors such as slurry flow velocity,hydrate particle density,hydrate particle size,and hydrate volume fraction on the stratified smooth flow were specifically studied.Orthogonal test obtained particle size has the most influence on the particle concentration distribution.The slurry flow velocity is gradually increased based on stratified smooth flow.Various flow patterns were observed and their characteristics were analyzed.Secondly,increasing the slurry velocity to 2 m/s could achieve the slurry flow pattern of partial hydrate in the pipeline transition from stratified smooth flow to wavy flow.When the flow rate increases to 3 m/s,a violent wave forms throughout the entire loop.Based on wave flow,as the velocity increased to 4 m/s,and the flow pattern changed to slug flow.When the particle concentration was below 10%,the increase of the concentration would aggravate the slug flow trend;if the particle concentration was above 10%,the increase of the concentration would weaken the slug flow trend,the increase of particle density and liquid viscosity would weaken the tendency of slug flow.The relationship between the pressure drop gradients of several different flow patterns is:slug flow>wave flow>stratified smooth flow.展开更多
Intelligent well system is the well that has a set of equipment fixed in the down hole including sensing devices, data transmission system and operating devices for information acquiring, data gathering and decision a...Intelligent well system is the well that has a set of equipment fixed in the down hole including sensing devices, data transmission system and operating devices for information acquiring, data gathering and decision analysis. By this remote control process, the smart well system can ultimately optimize well deliverability; it is used more and more often in oil fields with its stability and control technique. At present, the main intelligent well systems in the worm include SCRAMS, Direct Hydraulic, Digital Hydraulic that belongs to WellDynamics Company, InForce and InCharge that belongs to Baker Oil Tools Company, RMC that belongs to Schlumberger Company. This paper compares different types of systems and their characteristics, recommending the InCharge system as the intelligent well system for East China Sea Oil Field according to its geological and reservoir conditions.展开更多
A new measurement device,consisting of swirling blades and capsule-shaped throttling elements,is proposed in this study to eliminate typical measurement errors caused by complex flow patterns in gas-liquid flow.The sw...A new measurement device,consisting of swirling blades and capsule-shaped throttling elements,is proposed in this study to eliminate typical measurement errors caused by complex flow patterns in gas-liquid flow.The swirling blades are used to transform the complex flow pattern into a forced annular flow.Drawing on the research of existing blockage flow meters and also exploiting the single-phase flow measurement theory,a formula is introduced to measure the phase-separated flow of gas and liquid.The formula requires the pressure ratio,Lockhart-Martinelli number(L-M number),and the gas phase Froude number.The unknown parameters appearing in the formula are fitted through numerical simulation using computational fluid dynamics(CFD),which involves a comprehensive analysis of the flow field inside the device from multiple perspectives,and takes into account the influence of pressure fluctuations.Finally,the measurement model is validated through an experimental error analysis.The results demonstrate that the measurement error can be maintained within±8%for various flow patterns,including stratified flow,bubble flow,and wave flow.展开更多
文摘Casing deformation is a widespread problem in a certain block of Jiaoshiba Shale Gas Field in Sichuan Basin,China,and it severely limits the development benefits of shale gas in that block.Based on the spatiotemporal characteristics of block formation,fracture development,and casing deformation occurrence,this paper employs an integrated geological—engineering research approach to identify the primary mechanisms governing casing deformation within the block and proposes countermeasures to prevent such deformation.The present research indicates the following findings:(1)The block has undergone multiple phases of tectonic superposition,with fracture development serving as the geological factor causing casing deformation.(2)Fracturing activation constitutes the engineering factor causing casing deformation,with 4 mm of formation slip inducing deformation.(3)The fracture activation risk map shows that Class Ⅰ and Class Ⅱ fractures account for 73.36%of the total recorded in the block.Within the most susceptible Class I risk zone,the critical activation pressure increment for fracturing operations ranges from 13.43 MPa to 13.99 MPa.Based on the distribution of casing failure risk zones identified in the fracture activation risk map,this paper proposes relevant technical countermeasures for preventing casing failure from three perspectives:shale gas well location deployment,drilling techniques,and fracturing techniques.These measures provide robust support for safeguarding the integrity of casing systems within the studied block.
基金Major national science and technology projects“Key Techniques for the Development of Low Abundance Tight Low Permeability Reservoirs”(2016ZX05048).
文摘Oxygen-reducing air flooding is a low-permeability reservoir recovery technology with safety and low-cost advantages.However,in the process of air injection and drive,carbon in the air is oxidized through the crude oil reservoir to generate CO_(2),and this can cause serious corrosion in the recovery well.In this study,experiments on the corrosion of J55 tubular steel in a fluid environment with coexisting O_(2)and CO_(2)in an autoclave are presented.In particular,a weight loss method and a 3D morphometer were used to determine the average and the local corrosion rate.The corrosion surface morphology and composition were also measured by means of scanning electron microscopy(SEM)and an X-ray diffractometer(XRD).The corrosion pattern and morphological characteristics of J55 steel were analyzed in the O2/CO_(2)environment for different degrees of oxygen-reduction.As made evident by the experimental results,the corrosion products were mainly ferrous carbonate and iron oxide.In general,air injection increases the degree of oxygen reduction,from oxygen corrosion characteristics to CO_(2)corrosion-based characteristics.As a result,the corrosion product film becomes denser,and the corrosion rate is lower.
基金supported by the National Natural Scienceof China (No.52175208)Scientific Research and Technology Development Project of CNPC (No.2023ZZ11)+1 种基金Fundamental Research and Strategic Reserve Technology Research Fund Project of CNPC (No.2023DQ03-03)Study on Key Technologies of Production Increase and Transformation of Gulong Shale Oil (2021ZZ10-04)。
文摘Erosion wear is a common failure mode in the oil and gas industry.In the hydraulic fracturing,the fracturing pipes are not only in high-pressure working environment,but also suffer from the impact of the high-speed solid particles in the fracturing fluid.Beneath such complex conditions,the vulnerable components of the pipe system are prone to perforation or even burst accidents,which has become one of the most serious risks at the fracturing site.Unfortunately,it is not yet fully understood the erosion mechanism of pipe steel for hydraulic fracturing.Therefore,this article provides a detailed analysis of the erosion behavior of fracturing pipes under complex working conditions based on experiments and numerical simulations.Firstly,we conducted erosion experiments on AISI 4135 steel for fracturing pipes to investigate the erosion characteristics of the material.The effects of impact angle,flow velocity and applied stress on erosion wear were comprehensively considered.Then a particle impact dynamic model of erosion wear was developed based on the experimental parameters,and the evolution process of particle erosion under different impact angles,impact velocities and applied stress was analyzed.By combining the erosion characteristics,the micro-structure of the eroded area,and the micro-mechanics of erosion damage,the erosion mechanism of pipe steel under fracturing conditions was studied in detail for the first time.Under high-pressure operating conditions,it was demonstrated through experiments and numerical simulations that the size of the micro-defects in the eroded area increased as the applied stress increased,resulting in more severe erosion wear of fracturing pipes.
文摘At present, the layering technology of water injection wells in Shengli Offshore Oilfield suffers from poor sealing, wear and tear of rubber parts, and corrosion and perforation of tubing, which seriously affect the normal production of oil wells. To this end, the efficient stratification technology of water injection wells is studied, which has the control of all hydraulic control systems in addition to the water distributor. Hydraulic control washable annular safety packer, one-time pressure, permanent locking;hydraulic control forcibly opens and closes the well washing channel to avoid polluting the marine ecological environment. The double-sealing structure design of the hydraulic-controlled repeating packer effectively expands the axial sealing area. The hydraulically controlled two-way well flushing valve realizes forward and reverse well flushing and improves well flushing efficiency. The connection between the hydraulic control system and the ground hydraulic control cabinet realizes the remote control of the underground hydraulic control tool by the office computer terminal system, reduces the labor intensity of post-maintenance, and solves the problem of operating safety for on-site personnel. By the end of 2020, the high-efficiency stratification technology of water injection wells had been applied in more than 140 wells in Chengdao Oilfield, and the longest validity period had reached 7.6 years. The overall practical life of the pipe string could effectively meet the 5-year efficient development requirements.
基金project was supported by the Fund of State Key Laboratory of Deep Oil and Gas,China University of Petroleum(East China)(No.SKLDOG2024-ZYRC-06)Key Program of National Natural Science Foundation of China(52130401)+1 种基金National Natural Science Foundation of China(52104055,52374058)Shandong Provincial Natural Science Foundation,China(ZR2021ME171,ZR2024YQ043)。
文摘CO_(2)flooding enhanced oil recovery(CO_(2)-EOR)represents a significant technology in the low permeability reservoir.With the fractures and heterogeneity in low permeability reservoirs,CO_(2)-EOR is susceptible to pessimistic gas channeling.Consequently,there is a need to develop conformance control materials that can be used in CO_(2)-EOR.Herein,to address the challenges of low strength and poor stability of polymer gel in high temperature and low permeability reservoirs,a new organic/metal ion composite crosslinking polymer gel(AR-Gel)is reported,which is formed by low hydrolysis and medium to high molecular weight polymer(CX-305),organic crosslinking agent(phenolic resin),and aluminium citrate(AI(Ⅲ)).The crosslinking of AI(Ⅲ)with carboxyl group and organic/metal ion double crosslinking can construct a more complex and stable polymer gel structure on the basis of traditional chemical crosslinking,to cope with the harsh conditions such as high temperature.The structure-activity relationship of AR-Gel was revealed by rheology behavior and micro-morphology.The applicability of AR-Gel in reservoir was investigated,as was its strength and stability in supercritical CO_(2).The anti-gas channeling and enhanced oil recovery of AR-Gel were investigated using low permeability fractured cores,and the field process parameters were provided.The gel can be used to meet supercritical CO_(2)reservoirs at 110℃and 20,000 mg/L salinity,with long-term stability over 60 days.The plugging rate of AR-Gel for fractured co re was 97%,with subsequent CO_(2)flooding re sulting in an enhanced oil recovery by 34.5%.ARGel can effectively control CO_(2)gas channeling and enhanced oil recovery.It offers a new material with high strength and temperature resistance,which is particularly beneficial in the CO_(2)flooding for the conformance control of oil field.
基金funded by the National Natural Science Foundation Project(Grant No.52274015)the National Science and Technology Major Project(Grant No.2025ZD1402205)。
文摘Casing damage resulting from sand production in unconsolidated sandstone reservoirs can significantly impact the average production of oil wells.However,the prediction task remains challenging due to the complex damage mechanism caused by sand production.This paper presents an innovative approach that combines feature selection(FS)with boosting algorithms to accurately predict casing damage in unconsolidated sandstone reservoirs.A novel TriScore FS technique is developed,combining mRMR,Random Forest,and F-test.The approach integrates three distinct feature selection approaches—TriScore,wrapper,and hybrid TriScore-wrapper and four interpretable Boosting models(AdaBoost,XGBoost,LightGBM,CatBoost).Moreover,shapley additive explanations(SHAP)was used to identify the most significant features across engineering,geological,and production features.The CatBoost model,using the Hybrid TriScore-rapper G_(1)G_(2)FS method,showed exceptional performance in analyzing data from the Gangxi Oilfield.It achieved the highestaccuracy(95.5%)and recall rate(89.7%)compared to other tested models.Casing service time,casing wall thickness,and perforation density were selected as the top three most important features.This framework enhances predictive robustness and is an effective tool for policymakers and energy analysts,confirming its capability to deliver reliable casing damage forecasts.
基金supported by the Natural Science Foundation of Shandong Province(ZR2021ME007)the National Natural Science Foundation in China(51574267)the Key Projects of China National Key Research and Development Plan(2019YFA0708703)。
文摘During oil displacement,surfactants often encounter challenges such as emulsion instability and channeling,which can compromise their efficiency.To address these issues,polymer microspheres were synthesized via reverse microemulsion polymerization using acrylamide,2-methyl-2-acrylamidopropane sulfonic acid,and stearyl methacrylate as monomers,with N,N-methylenebisacrylamide as the crosslinker.The microspheres were then combined with sodium alkyl alcohol polyoxyethylene ether carboxylate to enhance emulsion stability and expand the swept volume of surfactant.A stable reverse microemulsion system was prepared using the maximum water solubilization rate as the indicator,and microspheres were synthesized based on this system.The ability of the microspheres to enhance emulsion stability was systematically evaluated.The plugging performance and enhanced oil recovery(EOR)efficiency of the microsphere/surfactant composite system were assessed through core seepage and oil displacement experiments.The experimental results demonstrated that microspheres were successfully prepared in a water-in-oil reverse microemulsion system with a solubilization rate of 42%.The emulsion stability was evaluated under an oil-to-water ratio of 7:3,a temperature of 80℃,and a salinity of 44,592 mg/L,by manually shaking the test tube five times.It was observed that the complete phase separation time of the emulsion increased from 10 to 120 min after the addition of microspheres.Under different permeability conditions(100×10^(-3),300×10^(-3),500×10^(-3)μm^(2)),the recovery efficiency of the composite system increased by 4.5%,8.3%,and 4.8%,respectively,compared to a single surfactant system.The microspheres developed in this study enhanced emulsion stability and increased the swept volume of surfactant within the formation,significantly boosting its oil recovery efficiency.
基金This work was supported by the National Natural Science Foundation of China(No.52174047)the China Scholarship Council(No.202106440102)the PetroChina Strategic Cooperation Science and Technology Project(No.ZLZX 2020-01).
文摘In this work,the factors affecting asphaltenes deposition in high-temperature and high-pressure wells were studied using backscattered light and PVT equipment customized to suit the well conditions.In an examination of the intensity of backscattered light,it was revealed that there exists a linear relationship between temperature and asphaltene precipitation within a specific temperature range.Within this range,a decrease in temperature tends to accelerate asphaltene precipitation.However,the impacts of pressure and gas-oil ratio are more pronounced.The pressure depletion induces the asphaltenes to precipitate out of the solution,followed by the formation of flocs below the bubble point.In addition,an increase in the gas-oil ratio causes a more severe asphaltene deposition,shifting the location of asphaltenes to deep well sections.
基金funded by the National Natural Science Foundation of China(Nos.52192622,51874253,U20A202)
文摘To investigate the height growth of multi-cluster fractures during variable fluid-viscosity fracturing in a layered shale oil reservoir,a two-dimensional finite element method(FEM)-discrete fracture network(DFN)model coupled with flow,stress and damage is proposed.A traction-separation law is used to describe the mixed-mode response of the damaged adhesive fractures,and the cubic law is used to describe the fluid flow within the fractures.The rock deformation is controlled by the in-situ stress,fracture cohesion and fluid pressure on the hydraulic fracture surface.The coupled finite element equations are solved by the explicit time difference method.The effects of the fracturing treatment parameters including fluid viscosity,pumping rate and cluster spacing on the geometries of multifractures are investigated.The results show that variable fluid-viscosity injection can improve the complexity of the fracture network and height of the main fractures simultaneously.The pumping rate of15 m^(3)/min,variable fluid-viscosity of 3-9-21-36-45 mPa s with a cluster spacing of 7.5 m is the ideal treatment strategy.The field application shows that the peak daily production of the application well with the optimized injection procedu re of variable fluid-viscosity fracturing is 171 tons(about 2.85 times that of the adjacent well),which is the highest daily production record of a single shale oil well in China,marking a strategic breakthrough of commercial shale oil production in the Jiyang Depression,Shengli Oilfield.The variable fluid-viscosity fracturing technique is proved to be very effective for improving shale oil production.
基金financially supported by the National Science and Technology Major Project(Nos.2017 ZX05009-003&2016 ZX05028)PetroChina Innovation Foundation(No.2018D-5007-0308)
文摘Abrasive waterjet(AWJ)fracturing has become an accepted horizontal multistage stimulation technique due to its flexibility and high efficiency of extensive fracture placement.The downhole tool failure of AWJ fracturing becomes an issue in the massive hydraulic fracturing because of high velocity and proppant erosion.This paper proposed a 3D computational fluid dynamics(CFD)-based erosion model by considering high-velocity waterjet impact,proppant shear erosion,and specific inner structure of hydra-jet tool body.The discrete phase approach was used to track the proppant transport and its concentration distribution.Field observation provides strong evidence of erosion patterns and mechanisms obtained from CFD simulation.The results show that the erosion rate has a space dependence in the inner wall of the tool body.The severe erosion areas are primarily located at the entries of the nozzle.Evident erosion patterns are found including a‘Rabbit’s ear’erosion at the upper-layer nozzles and a half bottom loop erosion at the lower-layer nozzles.Erosion mechanisms attribute to high flow velocity at the entry of nozzles and the inertia force of proppant.Sensitivity analysis demonstrates that the pumping rate is a primary factor contributing to erosion intensity.
文摘Application of light-weight drilling fluids is essential to develop depleted hydrocarbon reservoirs.Recently,colloidal gas aphron(CGA)-based fluids have been introduced for such applications due to their ability in controlling fluid losses.In this work,a comprehensive experimental study was performed to choose the best formulation for CGA fluids by implementing static stability tests,rheological behavior measurements,and bubble size analyses of CGAs.Xanthan gum polymer and sodium dodecyl benzene sulfonate(SDBS),an anionic surfactant,and cetyl trimethyl ammonium bromide(CTAB),a cationic surfactant,were utilized to prepare CGAs.For the range of experiments conducted,the performance of CGA fluids prepared with SDBS was improved by increasing the polymer and surfactant concentrations.However,for CTAB,it was improved by an increase in the polymer concentration and a decrease in the surfactant concentration.The formation of white,long hair-like precipitates observed at high levels of CTAB caused CGA fluid to become rapidly unstable.Also,it was observed that the size of CGAs was significantly influenced by the polymer and surfactant concentrations.The most stable bubbles were formed at 6.86 g/L of polymer concentration.The results of this study provide insights into appropriate formulation for CGA-based fluids which could be potentially applicable in drilling operations.
文摘The application of nanoparticles(NPs) in enhanced oil recovery(EOR) offers a practical approach to resolving some surface-related problems encountered in contemporary technological processes. In this study, graphene oxide nanosheets(GONs) were synthesized by Hummer's method and, then, were subjected to surface modification by hexamethyldisilazane(HMDS) and diazonium sulfonic(DS) compounds. The new combination was known as GO-Su-HMDS. The potential stability of GO-Su-HMDS nanofluids(NFs) was investigated using the zeta(ζ) potential test. A comparative study of the effect of the synthesized NFs on wettability alteration of the reservoir rock was performed using interfacial tension(IFT) and contact angle experiments. According to the results of this study, the contact angle decreased from the initial value of 161.(oil wet) to 35.(water wet). In addition, IFT decreased from18.45 mN/m for deionized(DI) water to 8.8 mN/m for 500 ppm GO-Su-HMDS NF. Moreover, the results of flooding experiments showed that the NPs of a GO-Su-HMDS concentration of 400 and 500 ppm could increase the oil recovery by 20% and 19%, respectively. The experimental results showed that GO-SuHMDS NFs with a concentration of 500 ppm have the best efficiency in terms of altering the wettability of the rock from oil wet to water wet. Thus, it can be said that this nanofluid can reduce the contact angle and IFT and also increase the sweeping efficiency of oil.
基金the Foundation of the Educational Commission of Hubei Province of China[Grant No.Q20191310]。
文摘The mechanically choked orifice plate (MCOP) is a new type of device for flow control by which choking conditionsfor incompressible fluids can be obtained with relatively small pressure losses. Given the lack of relevant results anddata in the literature, in the present study, we concentrate on the experimental determination of the flow coefficientfor the annular orifice, the pressure distribution in the MCOP, and the characteristics of the choked flow itself. Asconfirmed by the experimental results, the Reynolds number, the orifice plate thickness, the plug taper, and theeccentricity have an obvious influence on the aforementioned flow coefficient. The pressure drop in the MCOPis mainly generated near the orifice plate, and the pressure upstream of the orifice plate is slightly reduced in theflow direction, while the pressure downstream of the orifice plate displays a recovery trend. The choked flow rateof the MCOP can be adjusted by replacing the spring with a maximum flow control deviation of 4.91%.
基金funded by National Natural Science Foundation Project(Grant No.52274015)Opening Project Fund of Materials Service Safety Assessment Facilities(MSAF-2021-102).
文摘The increasing energy demand has pushed oil and gas exploration and development limits to extremely challenging and harsher HTHP (High Temperature and High Pressure) environments. Maintaining wellbore integrity in these environments, particularly in HPHT reservoirs with corrosive gases, presents a significant challenge. Robust risk evaluation and mitigation strategies are required to address these reservoirs' safety, economic, and environmental uncertainties. This study investigates chemo-mechanical properties degradations of class G oil well cement blended with silica fume, liquid silica, and latex when exposed to high temperature (150 °C) and high partial pressure of CO_(2) saturated brine. The result shows that these admixtures surround the cement grains and fill the interstitial spaces between the cement particles to form a dense crystal system of C–S–H. Consequently, the cement's percentage of pore voids, permeability, and the content of alkali compounds reduce, resulting in increased resistance to CO_(2) corrosion. Liquid silica, a specially prepared silica suspension, is a more effective alternative to silica fume in protecting oil well cement against CO_(2) chemical degradation. Micro-indentation analysis shows a significant deterioration in the mechanical properties of the cement, including average elastic modulus and hardness, particularly in the outer zones in direct contact with corrosive fluids. This study highlights the significance of incorporating admixtures to mitigate the effects of CO_(2) corrosion in HPHT environments and provides a valuable technique for quantitatively evaluating the mechanical-chemical degradation of cement sheath.
基金financially supported by the National Natural Science Foundation of China(Grant No.52150410427)the Key Support Program for Foreign Experts of the Ministry of Science and Technology of the People's Republic of China(No.wgxz2022057)funding for post-doctoral work by the Department of Human Resources and Social Security of Hubei Province。
文摘Thermo-responsive nanocomposites have recently emerged as potential nanoplugging agents for shale stabilization in high-temperature water-based drilling fluids(WBDFs). However, their inhibitory properties have not been very effective in high-temperature drilling operations. Thermo-responsive Janus nanocomposites are expected to strongly interact with clay particles from the inward hemisphere of nanomaterials, which drive the establishment of a tighter hydrophobic membrane over the shale surface at the outward hemisphere under geothermal conditions for shale stabilization. This work combines the synergistic benefits of thermo-responsive and zwitterionic nanomaterials to synchronously enhance the chemical inhibitions and plugging performances in shale under harsh conditions. A novel thermoresponsive Janus nanosilica(TRJS) exhibiting zwitterionic character was synthesized, characterized,and assessed as shale stabilizer for WBDFs at high temperatures. Compared to pristine nanosilica(Si NP)and symmetrical thermo-responsive nanosilica(TRS), TRJS exhibited anti-polyelectrolyte behaviour, in which electrolyte ions screened the electrostatic attraction between the charged particles, potentially stabilizing nanomaterial in hostile shaly environments(i.e., up to saturated brine or API brine). Macroscopically, TRJS exhibited higher chemical inhibition than Si NP and TRS in brine, prompting a better capability to control pressure penetration. TRJS adsorbed onto the clay surface via chemisorption and hydrogen bonding, and the interactions became substantial in brine, according to the results of electrophoretic mobility, surface wettability, and X-ray diffraction. Thus, contributing to the firm trapping of TRJS into the nanopore structure of the shale, triggering the formation of a tight hydrophobic membrane over the shale surface from the outward hemisphere. The addition of TRJS into WBDF had no deleterious effect on fluid properties after hot-treatment at 190℃, implying that TRJS could find potential use as a shale stabilizer in WBDFs in hostile environments.
基金supported by the Major Scientific and Technological Projects of CNPC under Grant ZD2019-183-006partially supported by the Shandong Provincial Natural Science Foundation,China under Grant ZR2020MF006partially supported by“the Fundamental Research Funds for the Central Universities”of China University of Petroleum(East China)under Grant 20CX05017A,18CX02139A.
文摘In recent years,with the development of the social Internet of Things(IoT),all kinds of data accumulated on the network.These data,which contain a lot of social information and opinions.However,these data are rarely fully analyzed,which is a major obstacle to the intelligent development of the social IoT.In this paper,we propose a sentence similarity analysis model to analyze the similarity in people’s opinions on hot topics in social media and news pages.Most of these data are unstructured or semi-structured sentences,so the accuracy of sentence similarity analysis largely determines the model’s performance.For the purpose of improving accuracy,we propose a novel method of sentence similarity computation to extract the syntactic and semantic information of the semi-structured and unstructured sentences.We mainly consider the subjects,predicates and objects of sentence pairs and use Stanford Parser to classify the dependency relation triples to calculate the syntactic and semantic similarity between two sentences.Finally,we verify the performance of the model with the Microsoft Research Paraphrase Corpus(MRPC),which consists of 4076 pairs of training sentences and 1725 pairs of test sentences,and most of the data came from the news of social data.Extensive simulations demonstrate that our method outperforms other state-of-the-art methods regarding the correlation coefficient and the mean deviation.
文摘To fully exploit the technical advantages of the large-depth and high-precision artificial source electromagnetic method in the complex structure area of southern Sichuan and compensate for the shortcomings of the conventional electromagnetic method in exploration depth,precision,and accuracy,the large-depth and high-precision wide field electromagnetic method is applied to the complex structure test area of the Luochang syncline and Yuhe nose anticline in the southern Sichuan.The advantages of the wide field electromagnetic method in detecting deep,low-resistivity thin layers are demonstrated.First,on the basis of the analysis of physical property data,a geological–geoelectric model is established in the test area,and the wide field electromagnetic method is numerically simulated to analyze and evaluate the response characteristics of deep thin shale gas layers on wide field electromagnetic curves.Second,a wide field electromagnetic test is conducted in the complex structure area of southern Sichuan.After data processing and inversion imaging,apparent resistivity logging data are used for calibration to develop an apparent resistivity interpretation model suitable for the test area.On the basis of the results,the characteristics of the electrical structure change in the shallow longitudinal formation of 6 km are implemented,and the transverse electrical distribution characteristics of the deep shale gas layer are delineated.In the prediction area near the well,the subsequent data verification shows that the apparent resistivity obtained using the inversion of the wide field electromagnetic method is consistent with the trend of apparent resistivity revealed by logging,which proves that this method can effectively identify the weak response characteristics of deep shale gas formations in complex structural areas.This experiment,it is shown shows that the wide field electromagnetic method with a large depth and high precision can effectively characterize the electrical characteristics of deep,low-resistivity thin layers in complex structural areas,and a new set of low-cost evaluation technologies for shale gas target layers based on the wide field electromagnetic method is explored.
基金supported by the National Natural Science Foundation of China(Grant No.52274061&52004039&51974037)China Postdoctoral Science Foundation(Grant No.2023T160717&2021M693908)+1 种基金The major project of universities affiliated to Jiangsu Province basic science(natural science)research(Grant No.21KJA440001)Jiangsu Qinglan Project,Changzhou Longcheng Talent Plan-Youth Science and Technology Talent Recruitment Project.
文摘The research on the multiphase flow characteristics of hydrate slurry is the key to implementing the risk prevention and control technology of hydrate slurry in deep-water oil and gas mixed transportation system.This paper established a geometric model based on the high-pressure hydrate slurry experimental loop.The model was used to carry out simulation research on the flow characteristics of gas-liquid-solid three-phase flow.The specific research is as follows:Firstly,the effects of factors such as slurry flow velocity,hydrate particle density,hydrate particle size,and hydrate volume fraction on the stratified smooth flow were specifically studied.Orthogonal test obtained particle size has the most influence on the particle concentration distribution.The slurry flow velocity is gradually increased based on stratified smooth flow.Various flow patterns were observed and their characteristics were analyzed.Secondly,increasing the slurry velocity to 2 m/s could achieve the slurry flow pattern of partial hydrate in the pipeline transition from stratified smooth flow to wavy flow.When the flow rate increases to 3 m/s,a violent wave forms throughout the entire loop.Based on wave flow,as the velocity increased to 4 m/s,and the flow pattern changed to slug flow.When the particle concentration was below 10%,the increase of the concentration would aggravate the slug flow trend;if the particle concentration was above 10%,the increase of the concentration would weaken the slug flow trend,the increase of particle density and liquid viscosity would weaken the tendency of slug flow.The relationship between the pressure drop gradients of several different flow patterns is:slug flow>wave flow>stratified smooth flow.
文摘Intelligent well system is the well that has a set of equipment fixed in the down hole including sensing devices, data transmission system and operating devices for information acquiring, data gathering and decision analysis. By this remote control process, the smart well system can ultimately optimize well deliverability; it is used more and more often in oil fields with its stability and control technique. At present, the main intelligent well systems in the worm include SCRAMS, Direct Hydraulic, Digital Hydraulic that belongs to WellDynamics Company, InForce and InCharge that belongs to Baker Oil Tools Company, RMC that belongs to Schlumberger Company. This paper compares different types of systems and their characteristics, recommending the InCharge system as the intelligent well system for East China Sea Oil Field according to its geological and reservoir conditions.
基金Supported By Open Fund of Hubei Key Laboratory of Oil and Gas Drilling and Production Engineering(Yangtze University),YQZC202309.
文摘A new measurement device,consisting of swirling blades and capsule-shaped throttling elements,is proposed in this study to eliminate typical measurement errors caused by complex flow patterns in gas-liquid flow.The swirling blades are used to transform the complex flow pattern into a forced annular flow.Drawing on the research of existing blockage flow meters and also exploiting the single-phase flow measurement theory,a formula is introduced to measure the phase-separated flow of gas and liquid.The formula requires the pressure ratio,Lockhart-Martinelli number(L-M number),and the gas phase Froude number.The unknown parameters appearing in the formula are fitted through numerical simulation using computational fluid dynamics(CFD),which involves a comprehensive analysis of the flow field inside the device from multiple perspectives,and takes into account the influence of pressure fluctuations.Finally,the measurement model is validated through an experimental error analysis.The results demonstrate that the measurement error can be maintained within±8%for various flow patterns,including stratified flow,bubble flow,and wave flow.
