Nowadays,the production of consumer goods is based on the use of non-renewable raw materials,which in recent years has been performing as a problem for the environment.Considering the large number of available biofibe...Nowadays,the production of consumer goods is based on the use of non-renewable raw materials,which in recent years has been performing as a problem for the environment.Considering the large number of available biofibers in nature,their use in the development of polymeric composites has inevitably emerged,it is also necessary to take into account the countless discarded plastics that still have the potential to be reused.In this work,fibers were extracted from pineapple crown residues and utilized to compose sustainable composites using recycled polypropylene from cups discarded in the trash as a matrix.However,it is known that for good performance,it is necessary to achieve a good chemical interaction between the fiber and the matrix.In order to improve this interaction,alkaline mercerization treatment was carried out on the surface of the fibers removing some components incompatible with the polymer.In this work,the effect of the mercerization treatment on the properties of the fibers was studied,as well as their interaction with the matrix.The effect of fiber concentration on the mechanical and thermal properties of composites was also evaluated.Levels of 5 and 7 wt%were used for both natural and mercerized fibers.A decrease in the number of degradation stages was observed through thermogravimetry analyses(from four in natural fiber to two in mercerized fibers),showing that the mercerization performed on the fibers was effective.An increase in the degree of crystallinity of mercerized fibers was also observed through the results of X-ray diffraction.Both techniques indicate that amorphous compounds,such as hemicellulose and lignin,were partially removed.Through the tensile test,it could be noted that all composites presented higher values of de elastic modulus than recycled polypropylene without added load;however,there were no differences in the elastic modulus between the different types of fibers and load levels.Therefore,it is interesting to use fibers as reinforcing agents in polymers;however,the treatment did not increase the mechanical properties of the composites.In parallel,other factors,such as the dispersion of the components,must be taken into account to justify this result.展开更多
Kraft lignin was liquefied using polyethylene glycol#400(PEG)and glycerol(G)in a weight ratio of 80/20(w/w)and sulphuric acid(SA)as catalyst under atmospheric pressure at 160ºC.The three independent variables:rea...Kraft lignin was liquefied using polyethylene glycol#400(PEG)and glycerol(G)in a weight ratio of 80/20(w/w)and sulphuric acid(SA)as catalyst under atmospheric pressure at 160ºC.The three independent variables:reaction time(60,80 and 100 min),percentage of lignin(15,20 and 25%,w/w),and catalyst concentration(0,3 and 6%,w/w),were varied resulting in 27 experimental runs.The effect of these reaction conditions on the properties of the polyols was evaluated.The statistical analysis showed that only“the percentage of lignin”did not influence the properties of the liquefied products,however,reaction time and catalyst load were important parameters.The resulting liquefied products were characterized by FTIR analysis.展开更多
Mesoporous MCM-41-type molecular sieves were synthesized using calcined and leached chrysotile and cetyltrimethylammonium bromide as the silica source and structure directing agent, respectively. Powder X-ray diffract...Mesoporous MCM-41-type molecular sieves were synthesized using calcined and leached chrysotile and cetyltrimethylammonium bromide as the silica source and structure directing agent, respectively. Powder X-ray diffraction (XRD), N2 isothermal adsorption-desorption, scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) were used to characterize the samples. The calcined and leached chrysotile can be employed as an inexpensive silica source for the formation of low-order MCM-41 mesoporous materials.展开更多
基金The authors would like to thank CAPES(Finance Code 001 and Process PNPD20131474-33001014004P9)and CNPq for financial support.
文摘Nowadays,the production of consumer goods is based on the use of non-renewable raw materials,which in recent years has been performing as a problem for the environment.Considering the large number of available biofibers in nature,their use in the development of polymeric composites has inevitably emerged,it is also necessary to take into account the countless discarded plastics that still have the potential to be reused.In this work,fibers were extracted from pineapple crown residues and utilized to compose sustainable composites using recycled polypropylene from cups discarded in the trash as a matrix.However,it is known that for good performance,it is necessary to achieve a good chemical interaction between the fiber and the matrix.In order to improve this interaction,alkaline mercerization treatment was carried out on the surface of the fibers removing some components incompatible with the polymer.In this work,the effect of the mercerization treatment on the properties of the fibers was studied,as well as their interaction with the matrix.The effect of fiber concentration on the mechanical and thermal properties of composites was also evaluated.Levels of 5 and 7 wt%were used for both natural and mercerized fibers.A decrease in the number of degradation stages was observed through thermogravimetry analyses(from four in natural fiber to two in mercerized fibers),showing that the mercerization performed on the fibers was effective.An increase in the degree of crystallinity of mercerized fibers was also observed through the results of X-ray diffraction.Both techniques indicate that amorphous compounds,such as hemicellulose and lignin,were partially removed.Through the tensile test,it could be noted that all composites presented higher values of de elastic modulus than recycled polypropylene without added load;however,there were no differences in the elastic modulus between the different types of fibers and load levels.Therefore,it is interesting to use fibers as reinforcing agents in polymers;however,the treatment did not increase the mechanical properties of the composites.In parallel,other factors,such as the dispersion of the components,must be taken into account to justify this result.
文摘Kraft lignin was liquefied using polyethylene glycol#400(PEG)and glycerol(G)in a weight ratio of 80/20(w/w)and sulphuric acid(SA)as catalyst under atmospheric pressure at 160ºC.The three independent variables:reaction time(60,80 and 100 min),percentage of lignin(15,20 and 25%,w/w),and catalyst concentration(0,3 and 6%,w/w),were varied resulting in 27 experimental runs.The effect of these reaction conditions on the properties of the polyols was evaluated.The statistical analysis showed that only“the percentage of lignin”did not influence the properties of the liquefied products,however,reaction time and catalyst load were important parameters.The resulting liquefied products were characterized by FTIR analysis.
基金The authors gratefully acknowledge financial support from CAPES organizationas well as the NEPGN-UFRN organization for use of their Scanning Electron Micros-copy
文摘Mesoporous MCM-41-type molecular sieves were synthesized using calcined and leached chrysotile and cetyltrimethylammonium bromide as the silica source and structure directing agent, respectively. Powder X-ray diffraction (XRD), N2 isothermal adsorption-desorption, scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) were used to characterize the samples. The calcined and leached chrysotile can be employed as an inexpensive silica source for the formation of low-order MCM-41 mesoporous materials.
