The goal of this work is to improve the simultaneous removal of Pb2+, Cu2+, Zn2+, and Cd2+ ions from synthetic wastewater in a fixed bed column by incorporating sodium dodecyl sulfate (SDS) onto the surface of activat...The goal of this work is to improve the simultaneous removal of Pb2+, Cu2+, Zn2+, and Cd2+ ions from synthetic wastewater in a fixed bed column by incorporating sodium dodecyl sulfate (SDS) onto the surface of activated carbon made from coconut shells. The activated carbons were characterized using Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy-energy dispersive x-ray (SEM-EDX). The adsorption column dynamics were studied by varying the flow rates (5, 10 and 15 mL/min), bed heights (10, 15 and 20 cm), and initial concentrations (50, 150, and 250 mg/L). The activated carbon has a pore volume of 0.715 cm3/g and a BET-specific surface area of 1410 m2/g. Sodium dodecyl sulfate (SDS) surfactant incorporation onto the surface of the activated carbon enhances its capacity for simultaneous adsorption of Pb2+, Cu2+, Zn2+, and Cd2+ from the aqueous medium. The affinity of the heavy metals to both unmodified (AC) and modified (AC-SDS) activated carbons followed the order of Pb2+ > Cu2+ > Zn2+ > Cd2+. The dynamic adsorption of the column depends on the flow rate, bed height, initial metal concentration, and SDS surface modification. With a 5 mL/min flow rate, a 20 cm bed height, and a 50 mg/L initial metal concentration, a maximum break-through time of 150 minutes for the unmodified activated carbon (AC) and 180 minutes for the SDS-modified activated carbon (AC-SDS) was reached.展开更多
This research considered the effect of non-natural aging on the microstructural characteristics and mechanical properties of as-cast aluminum 6063 alloys. The samples were developed through a sand casting process and ...This research considered the effect of non-natural aging on the microstructural characteristics and mechanical properties of as-cast aluminum 6063 alloys. The samples were developed through a sand casting process and machined into tensile and impact test samples before carrying out solution heat treatment at 550?C (0.83 T<sub>m</sub>) on two parts of the samples while retaining one part as the control. The two parts were further divided into sets denoted A and B and were aged at 180?C (0.27 T<sub>m</sub>) and 160?C (0.24 T<sub>m</sub>), respectively, for 12 hours. The results showed that sample A has the optimal yield strength and ultimate tensile strength of 192 and 206 MPa, respectively. Likewise, the sample gave the highest impact strength value of about 9.63 J/mm<sup>2</sup>. The observed results were supported by the optical micrograph, which revealed that the sample has evenly dispersed precipitates in its microstructure. This is deemed responsible for the observed increase in strength of the sample.展开更多
A geophysical survey involving the electrical resistivity method utilizing the Vertical Electrical Sounding (VES) and Electrical Imaging Techniques was conducted around the premises of an area within south-western Nig...A geophysical survey involving the electrical resistivity method utilizing the Vertical Electrical Sounding (VES) and Electrical Imaging Techniques was conducted around the premises of an area within south-western Nigeria with the aim of studying structural defects which may be responsible for future problems and characterizing the soil conditions of the site. A total of 15 VES stations were occupied using Schlumberger Configuration with AB/2 varying from 1 to 65 m. In the electrical imaging, dipole-dipole array was adopted and the two traverses were occupied in the S-N and E-W directions close to where wall cracks and subsurface problems were manifested. Five main geoelectric sequences were delineated within the study area;these include the topsoil (clay and sandy clay), lateritic clay, weathered bedrock (clay, sandy clay and clayey sand), fractured bedrock and fresh basement. A major discontinuity (fracture zone) was discovered along the S-N direction, while a weak zone was also discovered along E-W direction. The result of this research has shown that the causes of the cracks and distress on the walls within the site may have been influenced by the differential settlement resulting from the incompetent subsoil materials and the fractured bedrock on which the foundation of the building was laid.展开更多
The effective dose takes into consideration the amount of absorbed dose received by tissues, individual organs and also organ’s radiosensitivity. This study concentrates on the Commission’s regulations of 1991 and 2...The effective dose takes into consideration the amount of absorbed dose received by tissues, individual organs and also organ’s radiosensitivity. This study concentrates on the Commission’s regulations of 1991 and 2007 tagged ICRP 60 and ICRP 103 respectively, and seeks to suggest the better guideline for determination of detriment to patient especially from abdominopelvic computed tomography. With mean totals of 375.0 mSv for the ICRP 60 and 341.3 mSv for the ICRP 103 obtained from abdominopelvic computed tomography involving 20 different patients, a T-test calculated value of 6.716 was obtained and compared with the value in the T-table at 95% confidence limit and 18 degrees of freedom to confirm whether there is a significant difference in both ICRP 60 and 103 recommendations in the determination of the effective dose. Finally, it is concluded that there is a significant difference in the ICRP 60 and ICRP 103 as fewer effective doses are obtained from the ICRP 103 recommendations and this difference verifies that the ICRP 103 is more suitable for the determination of the effective dose.展开更多
A safe and environmentally friendly cyaniding method has been developed to mitigate the toxic impacts of cyanide salts on the environment during conventional cyaniding. The method entails in-situ diffusion of nascent ...A safe and environmentally friendly cyaniding method has been developed to mitigate the toxic impacts of cyanide salts on the environment during conventional cyaniding. The method entails in-situ diffusion of nascent cyanide from mature cassava leaves into the surface of mild steel components via pack-cyaniding. Both high-temperature in-situ diffusion into austenite and low-temperature in-situ diffusion into ferrite were explored. Results from light and scanning electron microscopic studies showed that surface hardness of the steel components was substantially increased. The waste product was a harmless biodegradable organic compound that posed no disposal threats. This study is important for increasing the wear resistance of ferrous parts for a longer service life in application without polluting the environment.展开更多
文摘The goal of this work is to improve the simultaneous removal of Pb2+, Cu2+, Zn2+, and Cd2+ ions from synthetic wastewater in a fixed bed column by incorporating sodium dodecyl sulfate (SDS) onto the surface of activated carbon made from coconut shells. The activated carbons were characterized using Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy-energy dispersive x-ray (SEM-EDX). The adsorption column dynamics were studied by varying the flow rates (5, 10 and 15 mL/min), bed heights (10, 15 and 20 cm), and initial concentrations (50, 150, and 250 mg/L). The activated carbon has a pore volume of 0.715 cm3/g and a BET-specific surface area of 1410 m2/g. Sodium dodecyl sulfate (SDS) surfactant incorporation onto the surface of the activated carbon enhances its capacity for simultaneous adsorption of Pb2+, Cu2+, Zn2+, and Cd2+ from the aqueous medium. The affinity of the heavy metals to both unmodified (AC) and modified (AC-SDS) activated carbons followed the order of Pb2+ > Cu2+ > Zn2+ > Cd2+. The dynamic adsorption of the column depends on the flow rate, bed height, initial metal concentration, and SDS surface modification. With a 5 mL/min flow rate, a 20 cm bed height, and a 50 mg/L initial metal concentration, a maximum break-through time of 150 minutes for the unmodified activated carbon (AC) and 180 minutes for the SDS-modified activated carbon (AC-SDS) was reached.
文摘This research considered the effect of non-natural aging on the microstructural characteristics and mechanical properties of as-cast aluminum 6063 alloys. The samples were developed through a sand casting process and machined into tensile and impact test samples before carrying out solution heat treatment at 550?C (0.83 T<sub>m</sub>) on two parts of the samples while retaining one part as the control. The two parts were further divided into sets denoted A and B and were aged at 180?C (0.27 T<sub>m</sub>) and 160?C (0.24 T<sub>m</sub>), respectively, for 12 hours. The results showed that sample A has the optimal yield strength and ultimate tensile strength of 192 and 206 MPa, respectively. Likewise, the sample gave the highest impact strength value of about 9.63 J/mm<sup>2</sup>. The observed results were supported by the optical micrograph, which revealed that the sample has evenly dispersed precipitates in its microstructure. This is deemed responsible for the observed increase in strength of the sample.
文摘A geophysical survey involving the electrical resistivity method utilizing the Vertical Electrical Sounding (VES) and Electrical Imaging Techniques was conducted around the premises of an area within south-western Nigeria with the aim of studying structural defects which may be responsible for future problems and characterizing the soil conditions of the site. A total of 15 VES stations were occupied using Schlumberger Configuration with AB/2 varying from 1 to 65 m. In the electrical imaging, dipole-dipole array was adopted and the two traverses were occupied in the S-N and E-W directions close to where wall cracks and subsurface problems were manifested. Five main geoelectric sequences were delineated within the study area;these include the topsoil (clay and sandy clay), lateritic clay, weathered bedrock (clay, sandy clay and clayey sand), fractured bedrock and fresh basement. A major discontinuity (fracture zone) was discovered along the S-N direction, while a weak zone was also discovered along E-W direction. The result of this research has shown that the causes of the cracks and distress on the walls within the site may have been influenced by the differential settlement resulting from the incompetent subsoil materials and the fractured bedrock on which the foundation of the building was laid.
文摘The effective dose takes into consideration the amount of absorbed dose received by tissues, individual organs and also organ’s radiosensitivity. This study concentrates on the Commission’s regulations of 1991 and 2007 tagged ICRP 60 and ICRP 103 respectively, and seeks to suggest the better guideline for determination of detriment to patient especially from abdominopelvic computed tomography. With mean totals of 375.0 mSv for the ICRP 60 and 341.3 mSv for the ICRP 103 obtained from abdominopelvic computed tomography involving 20 different patients, a T-test calculated value of 6.716 was obtained and compared with the value in the T-table at 95% confidence limit and 18 degrees of freedom to confirm whether there is a significant difference in both ICRP 60 and 103 recommendations in the determination of the effective dose. Finally, it is concluded that there is a significant difference in the ICRP 60 and ICRP 103 as fewer effective doses are obtained from the ICRP 103 recommendations and this difference verifies that the ICRP 103 is more suitable for the determination of the effective dose.
文摘A safe and environmentally friendly cyaniding method has been developed to mitigate the toxic impacts of cyanide salts on the environment during conventional cyaniding. The method entails in-situ diffusion of nascent cyanide from mature cassava leaves into the surface of mild steel components via pack-cyaniding. Both high-temperature in-situ diffusion into austenite and low-temperature in-situ diffusion into ferrite were explored. Results from light and scanning electron microscopic studies showed that surface hardness of the steel components was substantially increased. The waste product was a harmless biodegradable organic compound that posed no disposal threats. This study is important for increasing the wear resistance of ferrous parts for a longer service life in application without polluting the environment.
