Lactide was synthesized using lactic acid and stannous octoate as raw material and catalyst, respectively. Poly(lactic acid)-poly(ethylene glycol) (PLA-PEG) was prepared by lactide and poly (ethylene glycol) (PEG) via...Lactide was synthesized using lactic acid and stannous octoate as raw material and catalyst, respectively. Poly(lactic acid)-poly(ethylene glycol) (PLA-PEG) was prepared by lactide and poly (ethylene glycol) (PEG) via ring-opening polymerization. The most appropriate technological conditions of synthesis of lactide were researched in the paper. The copolymers were measured by Infrared spectroscopy (IR) and <sup>1</sup>H nuclear magnetic resonance (<sup>1</sup>H NMR). The results proved that the lactide and PLA-PEG were synthesized successfully. Hydrophilic performance of the copolymer was measured by a water contact angle tester after prepared into a flat membrane. The water contact angle changed from 81.5? to 71.6?, which proved that the hydrophily of PLA-PEG was better than PLA.展开更多
Electrospun fibers,with proven ability to promote tissue regeneration,are widely being explored for rotator cuff repairing.However,without post treatment,the microstructure of the electrospun scaffold is vastly differ...Electrospun fibers,with proven ability to promote tissue regeneration,are widely being explored for rotator cuff repairing.However,without post treatment,the microstructure of the electrospun scaffold is vastly different from that of natural extracellular matrix(ECM).Moreover,during mechanical loading,the nanofibers slip that hampers the proliferation and differentiation of migrating stem cells.Here,electrospun nanofiber scaffolds,with crimped nanofibers and welded joints to biomimic the intricate natural microstructure of tendon-to-bone insertion,were prepared using poly(ester-urethane)urea and gelatin via electrospinning and double crosslinking by a multi-bonding network densification strategy.The crimped nanofiber scaffold(CNS)features bionic tensile stress and induces chondrogenic differentiation,laying credible basis for in vivo experimentation.After repairing a rabbit massive rotator cuff tear using a CNS for 3 months,the continuous translational tendon-to-bone interface was fully regenerated,and fatty infiltration was simultaneously inhibited.Instead of micro-CT,μCT was employed to visualize the integrity and intricateness of the three-dimensional microstructure of the CNS-induced-healed tendon-to-bone interface at an ultra-high resolution of less than 1μm.This study sheds light on the correlation between nanofiber post treatment and massive rotator cuff repair and provides a general strategy for crimped nanofiber preparation and tendon-to-bone interface imaging characterization.展开更多
A chronic wound in diabetic patients is a major public health concern withsocioeconomic and clinical manifestations.The underlying medical condition of diabeticpatients deteriorates the wound through physiological,met...A chronic wound in diabetic patients is a major public health concern withsocioeconomic and clinical manifestations.The underlying medical condition of diabeticpatients deteriorates the wound through physiological,metabolic,molecular,and cellularpathologies.Consequently,a wound enters a vicious pathological inflammatory cycle.Many therapeutic approaches are in practice to manage diabetic wounds hence ensuringthe regeneration process.Polymer-based biomaterials have come up with hightherapeutic promises.Many efforts have been devoted,over the years,to build aneffective wound healing material using polymers.The electrospinning technique,although not new,has turned out to be one of the most effective strategies in buildingwound healing biomaterials due to the special structural advantages of electrospunnanofibers over the other formulations.In this review,careful integration of allelectrospinning approaches has been presented which will not only give an insight intothe current updates but also be helpful in the development of new therapeutic materialconsidering pathophysiological conditions of a diabetic wound.展开更多
文摘Lactide was synthesized using lactic acid and stannous octoate as raw material and catalyst, respectively. Poly(lactic acid)-poly(ethylene glycol) (PLA-PEG) was prepared by lactide and poly (ethylene glycol) (PEG) via ring-opening polymerization. The most appropriate technological conditions of synthesis of lactide were researched in the paper. The copolymers were measured by Infrared spectroscopy (IR) and <sup>1</sup>H nuclear magnetic resonance (<sup>1</sup>H NMR). The results proved that the lactide and PLA-PEG were synthesized successfully. Hydrophilic performance of the copolymer was measured by a water contact angle tester after prepared into a flat membrane. The water contact angle changed from 81.5? to 71.6?, which proved that the hydrophily of PLA-PEG was better than PLA.
基金supported by Instrumental Analysis Center of Shanghai Jiao Tong University.This work was supported by the National Natural Science Foundation of China[Grant No.81902186,81671920,31972923,81871753,81772341]National Key Research and Development Program of China[Grant No.2018YFC1106200,2018YFC1106201,2018YFC1106202]Technology Support Project of Science and Technology Commission of Shanghai Municipality of China[Grant No.19441901700,19441901701,19441901702,18441902800].
文摘Electrospun fibers,with proven ability to promote tissue regeneration,are widely being explored for rotator cuff repairing.However,without post treatment,the microstructure of the electrospun scaffold is vastly different from that of natural extracellular matrix(ECM).Moreover,during mechanical loading,the nanofibers slip that hampers the proliferation and differentiation of migrating stem cells.Here,electrospun nanofiber scaffolds,with crimped nanofibers and welded joints to biomimic the intricate natural microstructure of tendon-to-bone insertion,were prepared using poly(ester-urethane)urea and gelatin via electrospinning and double crosslinking by a multi-bonding network densification strategy.The crimped nanofiber scaffold(CNS)features bionic tensile stress and induces chondrogenic differentiation,laying credible basis for in vivo experimentation.After repairing a rabbit massive rotator cuff tear using a CNS for 3 months,the continuous translational tendon-to-bone interface was fully regenerated,and fatty infiltration was simultaneously inhibited.Instead of micro-CT,μCT was employed to visualize the integrity and intricateness of the three-dimensional microstructure of the CNS-induced-healed tendon-to-bone interface at an ultra-high resolution of less than 1μm.This study sheds light on the correlation between nanofiber post treatment and massive rotator cuff repair and provides a general strategy for crimped nanofiber preparation and tendon-to-bone interface imaging characterization.
基金supported by the Fundamental Research Funds for the Central Universities(Grant No.2232019A3-07)the National Key Research Program of China(2016YFA0201702 of 2016YFA0201700)+1 种基金the National Natural Science Foundation of China(Grant No.31771023)the Science and Technology Commission of Shanghai Municipality(Grant No.19441902600).
文摘A chronic wound in diabetic patients is a major public health concern withsocioeconomic and clinical manifestations.The underlying medical condition of diabeticpatients deteriorates the wound through physiological,metabolic,molecular,and cellularpathologies.Consequently,a wound enters a vicious pathological inflammatory cycle.Many therapeutic approaches are in practice to manage diabetic wounds hence ensuringthe regeneration process.Polymer-based biomaterials have come up with hightherapeutic promises.Many efforts have been devoted,over the years,to build aneffective wound healing material using polymers.The electrospinning technique,although not new,has turned out to be one of the most effective strategies in buildingwound healing biomaterials due to the special structural advantages of electrospunnanofibers over the other formulations.In this review,careful integration of allelectrospinning approaches has been presented which will not only give an insight intothe current updates but also be helpful in the development of new therapeutic materialconsidering pathophysiological conditions of a diabetic wound.
