Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade...Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade,lasers have emerged as a promising solution,providing focused energy beams for controllable,efficient,and reliable ignition in the field of energetic materials.This study presents a comparative analysis of two state-of-the-art ignition approaches:direct laser ignition and laser-driven flyer ignition.Experiments were performed using a Neodymium-doped Yttrium Aluminum Garnet(Nd:YAG)laser at different energy beam levels to systematically evaluate ignition onset.In the direct laser ignition test setup,the laser beam was applied directly to the energetic tested material,while laserdriven flyer ignition utilized 40 and 100μm aluminum foils,propelled at velocities ranging from 300 to 1250 m/s.Comparative analysis with the Lawrence and Trott model substantiated the velocity data and provided insight into the ignition mechanisms.Experimental results indicate that the ignition time for the laser-driven flyer method was significantly shorter,with the pyrotechnic composition achieving complete combustion faster compared to direct laser ignition.Moreover,precise ignition thresholds were determined for both methods,providing critical parameters for optimizing ignition systems in energetic materials.This work elucidates the advantages and limitations of each technique while advancing next-generation ignition technology,enhancing the reliability and safety of propulsion systems.展开更多
This study represents an important step forward in the domain of additive manufacturing of energetic materials.It presents the successful formulation and fabrication by 3D printing of gun propellants using Fused Depos...This study represents an important step forward in the domain of additive manufacturing of energetic materials.It presents the successful formulation and fabrication by 3D printing of gun propellants using Fused Deposition Modeling(FDM)technology,highlighting the immense potential of this innovative approach.The use of FDM additive manufacturing technology to print gun propellants is a significant advancement due to its novel application in this field,which has not been previously reported.Through this study,the potential of FDM 3D-printing in the production of high-performance energetic composites is demonstrated,and also a new standard for manufacturability in this field can be established.The thermoplastic composites developed in this study are characterized by a notably high energetic solids content,comprising 70%hexogen(RDX)and 10%nitrocellulose(NC),which surpasses the conventional limit of 60%energetic solids typically achieved in stereolithography and light-curing 3D printing methods.The primary objective of the study was to optimize the formulation,enhance performance,and establish an equilibrium between printability and propellant efficacy.Among the three energetic for-mulations developed for 3D printing feedstock,only two were suitable for printing via the FDM tech-nique.Notably,the formulation consisting of 70%RDX,10%NC,and 20%polycaprolactone(PCL)emerged as the most advantageous option for gun propellants,owing to its exceptional processability,ease of printability,and high energetic performance.展开更多
The detonation of an explosive atmosphere from liquefied petroleum gas disseminated in air in a confined space is studied using numerical modeling with software product ANSYS AUTODYN.
An important problem in studying the sloped rocket launch is to determine the oscillations and their effects on the initial conditions of the rocket path.This phenomenon influences the stability of the launching devic...An important problem in studying the sloped rocket launch is to determine the oscillations and their effects on the initial conditions of the rocket path.This phenomenon influences the stability of the launching device and the firing precision.It is assumed that the launching device and the moving rocket form a complex oscillating system that join together into a sum of rigid bodies bound by elastic elements(the vehicle chassis,the tilting platform and the rockets in the containers).The calculations of the launching device oscillations during the launch by numerical methods are presented.展开更多
The paper deals with the design and experimental validation of the actuation mechanism control system for a morphing wing model.The experimental morphable wing model manufactured in this project is a full-size scale w...The paper deals with the design and experimental validation of the actuation mechanism control system for a morphing wing model.The experimental morphable wing model manufactured in this project is a full-size scale wing tip for a real aircraft equipped with an aileron.The morphing actuation of the model is based on a mechanism with four similar in house designed and manufactured actuators,positioned inside the wing on two parallel lines.Each of the four actuators used a BrushLess Direct Current(BLDC)electric motor integrated with a mechanical part performing the conversion of the angular displacements into linear displacements.The following have been chosen as successive steps in the design of the actuator control system:(A)Mathematical and software modelling of the actuator;(B)Design of the control system architecture and tuning using Internal Model Control(IMC)methodology;(C)Numerical simulation of the controlled actuator and its testing on bench and wind tunnel.The morphing wing experimental model is tested both at the laboratory level,with no airflow,to evaluate the components integration and the whole system functioning,but also in the wind tunnel,in the presence of airflow,to evaluate its behavior and the aerodynamic gain.展开更多
This study applies a stochastic frontier production approach to decompose the sources of total productivity (TFP) growth into technical progress and changes in technical efficiency of 8057 firms in Vietnamese manufact...This study applies a stochastic frontier production approach to decompose the sources of total productivity (TFP) growth into technical progress and changes in technical efficiency of 8057 firms in Vietnamese manufacturing industries during 2003-2007. Using both total manufacturing industry and sub-manufacturing industrial regressions, the analysis focuses on the trend of technological progress (TP) and technical efficiency change (TEC), and the role of productivity change in economic growth. According to the estimated results, the annual technical progress for the manufacturing industry and sub-manufacturing industries are calculated directly from the estimated parameters of the translog stochastic frontier production function by taking a partial derivative of output with respect to time t. The average technical changes in manufacturing industry and sub-manufacturing industries are positive, with an average technical change about 5.2%, 5.8%, 5.4%, 11.8%, 4.6%, 4.1%, 7.3%, 4.8%, 4.8% and 4.8% for total sample, food products & beverages, textile & wearing apparel, footwear, paper & products, industrial chemicals, rubber & plastic products, non- metallic mineral, basic & fabricated metal and other sub-industries, respectively. Total TFP in the manufacturing sector has grown at the annual rate of 0.052, although the rate of growth decreased continuously during the sample period. For the sub-industry estimates during the sample period, TFP grew fastest in the footwear sub-industry, with annual average growth rate of 11.8%, followed by the rubber & plastic products with a rate of 7.3%, and the food products & beverages with a rate of 5.8% per annum.展开更多
This paper proposes a new approach for ranking efficiency units in data envelopment analysis as a modification of the super-efficiency models developed by Tone [1]. The new approach based on slacks-based measure of ef...This paper proposes a new approach for ranking efficiency units in data envelopment analysis as a modification of the super-efficiency models developed by Tone [1]. The new approach based on slacks-based measure of efficiency (SBM) for dealing with objective function used to classify all of the decision-making units allows the ranking of all inefficient DMUs and overcomes the disadvantages of infeasibility. This method also is applied to rank super-efficient scores for the sample of 145 agricultural bank branches in Viet Nam during 2007-2010. We then compare the estimated results from the new SCI model and the exsisting SBM model by using some statistical tests.展开更多
In this paper we consider the problem of determining the optimal time to buy an asset in a position of an uptrend or downtrend in the financial market and currency market as well as other markets. Asset price is model...In this paper we consider the problem of determining the optimal time to buy an asset in a position of an uptrend or downtrend in the financial market and currency market as well as other markets. Asset price is modeled as a geometric Brownian motion with drift being a two-state Markov chain. Based on observations of asset prices, investors want to detect the change points of price trends as accurately as possible, so that they can make the decision to buy. Using filtering techniques and stochastic analysis, we will develop the optimal boundary at which investors implement their decisions when the posterior probability process reaches a certain threshold.展开更多
The purpose of the present study was to explore and subsequently establish a technique for determination of analytical solutions for the differential equation for composite thin plates. The considered reasons for the ...The purpose of the present study was to explore and subsequently establish a technique for determination of analytical solutions for the differential equation for composite thin plates. The considered reasons for the solutions were to exactly satisfy the boundary conditions and to verify as close as possible the differential equation of the plate. There are studied two solutions for orthotropic plate with clamped edges, and made comparisons with the solutions presented by Reddy [1] and with the exact solution by Timoshenko and Woinowsky. The models are based on the CLPT （classical laminated plate theory）. The Ritz method, in conjunction with the weighted residue method for the coefficients calculation, is used to analytically determine the bending solutions of orthotropic laminated plates subjected to uniform pressure on the bottom laminate. The purposed solutions were critically analysed considering a FEM （finite element method） solution for comparison. Finally, it is presented the experimental device and the experimental test results, as well. Fabrics have been incorporated into two composite plates were required scalps on one direction, thus ensuring different elasticity modules on both directions. Thorough comparison between analytical solutions, numerical results and experimental data is performed and a good agreement is obtained.展开更多
The facies distribution of a reservoir is one of the biggest concerns for geologists,geophysicists,reservoir modelers,and reservoir engineers due to its high importance in the setting of any reliable decisionmaking/op...The facies distribution of a reservoir is one of the biggest concerns for geologists,geophysicists,reservoir modelers,and reservoir engineers due to its high importance in the setting of any reliable decisionmaking/optimization of field development planning.The approach for parameterizing the facies distribution as a random variable comes naturally through using the probability fields.Since the prior probability fields of facies come either from a seismic inversion or from other sources of geologic information,they are not conditioned to the data observed from the cores extracted from the wells.This paper presents a regularized element-free Galerkin(R-EFG)method for conditioning facies probability fields to facies observation.The conditioned probability fields respect all the conditions of the probability theory(i.e.all the values are between 0 and 1,and the sum of all fields is a uniform field of 1).This property achieves by an optimization procedure under equality and inequality constraints with the gradient projection method.The conditioned probability fields are further used as the input in the adaptive pluri-Gaussian simulation(APS)methodology and coupled with the ensemble smoother with multiple data assimilation(ES-MDA)for estimation and uncertainty quantification of the facies distribution.The history-matching of the facies models shows a good estimation and uncertainty quantification of facies distribution,a good data match and prediction capabilities.展开更多
In this paper, we present an application of Genetic Programming (GP) to Vietnamese CPI in?ation one-step prediction problem. This is a new approach in building a good forecasting model, and then applying inflation for...In this paper, we present an application of Genetic Programming (GP) to Vietnamese CPI in?ation one-step prediction problem. This is a new approach in building a good forecasting model, and then applying inflation forecasts in Vietnam in current stage. The study introduces the within-sample and the out-of-samples one-step-ahead forecast errors which have positive correlation and approximate to a linear function with positive slope in prediction models by GP. We also build Vector Autoregression (VAR) model to forecast CPI in quaterly data and compare with the models created by GP. The experimental results show that the Genetic Programming can produce the prediction models having better accuracy than Vector Autoregression models. We have no relavant variables (m2, ex) of monthly data in the VAR model, so no prediction results exist to compare with models created by GP and we just forecast CPI basing on models of GP with previous data of CPI.展开更多
This paper considered an autoregressive time series where the slope contains random components with non-negative values. The authors determine the stationary condition of the series to estimate its parameters by the q...This paper considered an autoregressive time series where the slope contains random components with non-negative values. The authors determine the stationary condition of the series to estimate its parameters by the quasi-maximum likelihood method. The authors also simulates and estimates the coefficients of the simulation chain. In this paper, we consider modeling and forecasting gold chain on the free market in Hanoi, Vietnam.展开更多
In this paper, we consider the problem to determine the optimal time to sell an asset that its price conforms to the Black-Schole model but its drift is a discrete random variable taking one of two given values and th...In this paper, we consider the problem to determine the optimal time to sell an asset that its price conforms to the Black-Schole model but its drift is a discrete random variable taking one of two given values and this probability distribution behavior changes chronologically. The result of finding the optimal strategy to sell the asset is the first time asset price falling into deterministic time-dependent boundary. Moreover, the boundary is represented by an increasing and continuous monotone function satisfying a nonlinear integral equation. We also conduct to find the empirical optimization boundary and simulate the asset price process.展开更多
In most structural applications, composite structures can be idealized as beams, plates or shells. The analysis is reduced from three-dimensional elasticity problem to a one-dimensional, or two-dimensional problem, ba...In most structural applications, composite structures can be idealized as beams, plates or shells. The analysis is reduced from three-dimensional elasticity problem to a one-dimensional, or two-dimensional problem, based on certain simplifying assumptions that can be made because the structure is thin. In this article is presented the mathematical model properly thin orthotropic plates, based on simplifying assumptions Love- Kirchhoff and small deformations. Proposed analytical solutions are considered both for solving equation orthotropic rectangular plates and for modal analysis, in the case of plates with clamped edges. The purposed solutions were analysed considering a FEM solution for comparison and the experimental test results.展开更多
Convergence problem of an economic variable represents an underlying forecast of neoclassical economic growth model. This paper aims to analyze the convergence of provincial per capita GDP stability in Vietnam over th...Convergence problem of an economic variable represents an underlying forecast of neoclassical economic growth model. This paper aims to analyze the convergence of provincial per capita GDP stability in Vietnam over the period of 1991-2007. This can be done by two approaches including bias data-based regression method for testing convergence and Markov chain model for describing features of long-term tendency of per capita income in Vietnam growth in provinces. The regression method results in the signs of convergence. To apply Markov process, we divide total pattern into 5 per capita income classes. Result estimated from the Markov chain model shows the poor convergence.展开更多
文摘Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade,lasers have emerged as a promising solution,providing focused energy beams for controllable,efficient,and reliable ignition in the field of energetic materials.This study presents a comparative analysis of two state-of-the-art ignition approaches:direct laser ignition and laser-driven flyer ignition.Experiments were performed using a Neodymium-doped Yttrium Aluminum Garnet(Nd:YAG)laser at different energy beam levels to systematically evaluate ignition onset.In the direct laser ignition test setup,the laser beam was applied directly to the energetic tested material,while laserdriven flyer ignition utilized 40 and 100μm aluminum foils,propelled at velocities ranging from 300 to 1250 m/s.Comparative analysis with the Lawrence and Trott model substantiated the velocity data and provided insight into the ignition mechanisms.Experimental results indicate that the ignition time for the laser-driven flyer method was significantly shorter,with the pyrotechnic composition achieving complete combustion faster compared to direct laser ignition.Moreover,precise ignition thresholds were determined for both methods,providing critical parameters for optimizing ignition systems in energetic materials.This work elucidates the advantages and limitations of each technique while advancing next-generation ignition technology,enhancing the reliability and safety of propulsion systems.
基金supported by a grant from the Ministry of Research, Innovation and Digitization, UEFISCDI, Grant Nos. PN-IIIP2-2.1-PED-2021-1890, PN-IV-P6-6.3-SOL-2024-2-0254 and PNIV-P7-7.1-PTE-2024-0517, within PNCDI Ⅳ.
文摘This study represents an important step forward in the domain of additive manufacturing of energetic materials.It presents the successful formulation and fabrication by 3D printing of gun propellants using Fused Deposition Modeling(FDM)technology,highlighting the immense potential of this innovative approach.The use of FDM additive manufacturing technology to print gun propellants is a significant advancement due to its novel application in this field,which has not been previously reported.Through this study,the potential of FDM 3D-printing in the production of high-performance energetic composites is demonstrated,and also a new standard for manufacturability in this field can be established.The thermoplastic composites developed in this study are characterized by a notably high energetic solids content,comprising 70%hexogen(RDX)and 10%nitrocellulose(NC),which surpasses the conventional limit of 60%energetic solids typically achieved in stereolithography and light-curing 3D printing methods.The primary objective of the study was to optimize the formulation,enhance performance,and establish an equilibrium between printability and propellant efficacy.Among the three energetic for-mulations developed for 3D printing feedstock,only two were suitable for printing via the FDM tech-nique.Notably,the formulation consisting of 70%RDX,10%NC,and 20%polycaprolactone(PCL)emerged as the most advantageous option for gun propellants,owing to its exceptional processability,ease of printability,and high energetic performance.
文摘The detonation of an explosive atmosphere from liquefied petroleum gas disseminated in air in a confined space is studied using numerical modeling with software product ANSYS AUTODYN.
文摘An important problem in studying the sloped rocket launch is to determine the oscillations and their effects on the initial conditions of the rocket path.This phenomenon influences the stability of the launching device and the firing precision.It is assumed that the launching device and the moving rocket form a complex oscillating system that join together into a sum of rigid bodies bound by elastic elements(the vehicle chassis,the tilting platform and the rockets in the containers).The calculations of the launching device oscillations during the launch by numerical methods are presented.
基金Bombardier AerospaceThales+1 种基金the Consortium for Research and Innovation in Aerospace in Quebec(CRIAQ)the National Sciences and Engineering Research Council(NSERC)for the funding received in connection with the CRIAQ MDO 505 project。
文摘The paper deals with the design and experimental validation of the actuation mechanism control system for a morphing wing model.The experimental morphable wing model manufactured in this project is a full-size scale wing tip for a real aircraft equipped with an aileron.The morphing actuation of the model is based on a mechanism with four similar in house designed and manufactured actuators,positioned inside the wing on two parallel lines.Each of the four actuators used a BrushLess Direct Current(BLDC)electric motor integrated with a mechanical part performing the conversion of the angular displacements into linear displacements.The following have been chosen as successive steps in the design of the actuator control system:(A)Mathematical and software modelling of the actuator;(B)Design of the control system architecture and tuning using Internal Model Control(IMC)methodology;(C)Numerical simulation of the controlled actuator and its testing on bench and wind tunnel.The morphing wing experimental model is tested both at the laboratory level,with no airflow,to evaluate the components integration and the whole system functioning,but also in the wind tunnel,in the presence of airflow,to evaluate its behavior and the aerodynamic gain.
文摘This study applies a stochastic frontier production approach to decompose the sources of total productivity (TFP) growth into technical progress and changes in technical efficiency of 8057 firms in Vietnamese manufacturing industries during 2003-2007. Using both total manufacturing industry and sub-manufacturing industrial regressions, the analysis focuses on the trend of technological progress (TP) and technical efficiency change (TEC), and the role of productivity change in economic growth. According to the estimated results, the annual technical progress for the manufacturing industry and sub-manufacturing industries are calculated directly from the estimated parameters of the translog stochastic frontier production function by taking a partial derivative of output with respect to time t. The average technical changes in manufacturing industry and sub-manufacturing industries are positive, with an average technical change about 5.2%, 5.8%, 5.4%, 11.8%, 4.6%, 4.1%, 7.3%, 4.8%, 4.8% and 4.8% for total sample, food products & beverages, textile & wearing apparel, footwear, paper & products, industrial chemicals, rubber & plastic products, non- metallic mineral, basic & fabricated metal and other sub-industries, respectively. Total TFP in the manufacturing sector has grown at the annual rate of 0.052, although the rate of growth decreased continuously during the sample period. For the sub-industry estimates during the sample period, TFP grew fastest in the footwear sub-industry, with annual average growth rate of 11.8%, followed by the rubber & plastic products with a rate of 7.3%, and the food products & beverages with a rate of 5.8% per annum.
文摘This paper proposes a new approach for ranking efficiency units in data envelopment analysis as a modification of the super-efficiency models developed by Tone [1]. The new approach based on slacks-based measure of efficiency (SBM) for dealing with objective function used to classify all of the decision-making units allows the ranking of all inefficient DMUs and overcomes the disadvantages of infeasibility. This method also is applied to rank super-efficient scores for the sample of 145 agricultural bank branches in Viet Nam during 2007-2010. We then compare the estimated results from the new SCI model and the exsisting SBM model by using some statistical tests.
文摘In this paper we consider the problem of determining the optimal time to buy an asset in a position of an uptrend or downtrend in the financial market and currency market as well as other markets. Asset price is modeled as a geometric Brownian motion with drift being a two-state Markov chain. Based on observations of asset prices, investors want to detect the change points of price trends as accurately as possible, so that they can make the decision to buy. Using filtering techniques and stochastic analysis, we will develop the optimal boundary at which investors implement their decisions when the posterior probability process reaches a certain threshold.
文摘The purpose of the present study was to explore and subsequently establish a technique for determination of analytical solutions for the differential equation for composite thin plates. The considered reasons for the solutions were to exactly satisfy the boundary conditions and to verify as close as possible the differential equation of the plate. There are studied two solutions for orthotropic plate with clamped edges, and made comparisons with the solutions presented by Reddy [1] and with the exact solution by Timoshenko and Woinowsky. The models are based on the CLPT （classical laminated plate theory）. The Ritz method, in conjunction with the weighted residue method for the coefficients calculation, is used to analytically determine the bending solutions of orthotropic laminated plates subjected to uniform pressure on the bottom laminate. The purposed solutions were critically analysed considering a FEM （finite element method） solution for comparison. Finally, it is presented the experimental device and the experimental test results, as well. Fabrics have been incorporated into two composite plates were required scalps on one direction, thus ensuring different elasticity modules on both directions. Thorough comparison between analytical solutions, numerical results and experimental data is performed and a good agreement is obtained.
文摘The facies distribution of a reservoir is one of the biggest concerns for geologists,geophysicists,reservoir modelers,and reservoir engineers due to its high importance in the setting of any reliable decisionmaking/optimization of field development planning.The approach for parameterizing the facies distribution as a random variable comes naturally through using the probability fields.Since the prior probability fields of facies come either from a seismic inversion or from other sources of geologic information,they are not conditioned to the data observed from the cores extracted from the wells.This paper presents a regularized element-free Galerkin(R-EFG)method for conditioning facies probability fields to facies observation.The conditioned probability fields respect all the conditions of the probability theory(i.e.all the values are between 0 and 1,and the sum of all fields is a uniform field of 1).This property achieves by an optimization procedure under equality and inequality constraints with the gradient projection method.The conditioned probability fields are further used as the input in the adaptive pluri-Gaussian simulation(APS)methodology and coupled with the ensemble smoother with multiple data assimilation(ES-MDA)for estimation and uncertainty quantification of the facies distribution.The history-matching of the facies models shows a good estimation and uncertainty quantification of facies distribution,a good data match and prediction capabilities.
文摘In this paper, we present an application of Genetic Programming (GP) to Vietnamese CPI in?ation one-step prediction problem. This is a new approach in building a good forecasting model, and then applying inflation forecasts in Vietnam in current stage. The study introduces the within-sample and the out-of-samples one-step-ahead forecast errors which have positive correlation and approximate to a linear function with positive slope in prediction models by GP. We also build Vector Autoregression (VAR) model to forecast CPI in quaterly data and compare with the models created by GP. The experimental results show that the Genetic Programming can produce the prediction models having better accuracy than Vector Autoregression models. We have no relavant variables (m2, ex) of monthly data in the VAR model, so no prediction results exist to compare with models created by GP and we just forecast CPI basing on models of GP with previous data of CPI.
文摘This paper considered an autoregressive time series where the slope contains random components with non-negative values. The authors determine the stationary condition of the series to estimate its parameters by the quasi-maximum likelihood method. The authors also simulates and estimates the coefficients of the simulation chain. In this paper, we consider modeling and forecasting gold chain on the free market in Hanoi, Vietnam.
文摘In this paper, we consider the problem to determine the optimal time to sell an asset that its price conforms to the Black-Schole model but its drift is a discrete random variable taking one of two given values and this probability distribution behavior changes chronologically. The result of finding the optimal strategy to sell the asset is the first time asset price falling into deterministic time-dependent boundary. Moreover, the boundary is represented by an increasing and continuous monotone function satisfying a nonlinear integral equation. We also conduct to find the empirical optimization boundary and simulate the asset price process.
文摘In most structural applications, composite structures can be idealized as beams, plates or shells. The analysis is reduced from three-dimensional elasticity problem to a one-dimensional, or two-dimensional problem, based on certain simplifying assumptions that can be made because the structure is thin. In this article is presented the mathematical model properly thin orthotropic plates, based on simplifying assumptions Love- Kirchhoff and small deformations. Proposed analytical solutions are considered both for solving equation orthotropic rectangular plates and for modal analysis, in the case of plates with clamped edges. The purposed solutions were analysed considering a FEM solution for comparison and the experimental test results.
文摘Convergence problem of an economic variable represents an underlying forecast of neoclassical economic growth model. This paper aims to analyze the convergence of provincial per capita GDP stability in Vietnam over the period of 1991-2007. This can be done by two approaches including bias data-based regression method for testing convergence and Markov chain model for describing features of long-term tendency of per capita income in Vietnam growth in provinces. The regression method results in the signs of convergence. To apply Markov process, we divide total pattern into 5 per capita income classes. Result estimated from the Markov chain model shows the poor convergence.
