A μ negative metamaterial using spiral resonator (SR) with an electromagnetically coupled (EMC) feeding system is proposed as a novel antenna structure. The proposed antenna is designed and fabricated on a FR4 dielec...A μ negative metamaterial using spiral resonator (SR) with an electromagnetically coupled (EMC) feeding system is proposed as a novel antenna structure. The proposed antenna is designed and fabricated on a FR4 dielectric substrate with a thickness of 1.6 mm and relative permittivity of 4.0 to achieve its radiation characteristic. The antenna is operated at frequency 2.4 GHz. To improve the antenna gain, a matching circuit is inserted into the feed line. The µnegative metamaterial is achieved by using a spiral resonator with spiral numbers N = 3, 5, 7, and 10. It is found that the negative imaginary part tends to shift leftward as the value of N increases. The simulation result of the proposed antenna structure with spiral number N = 3, strip width w = 3.1 mm, and gap width s = 0.5 mm provides the best performance with S11 = -15 dB, VSWR < 2 bandwidth of 30 MHz and gain of –0.5 dB at frequency of 2.43 GHz. The proposed antenna with matching circuit provides the antenna gain of 2.21 dB, which is better than that without the matching circuit. The dimensions of the proposed antenna are reduced by 53% compared with those of the conventional patch. Both the simulation and measurement results of the radiation characteristics of the proposed antenna show good agreement.展开更多
In this paper a non-iterative technique is developed for the correction of faulty antenna array based on matrix pencil technique（MPT）. The failure of a sensor in antenna array can damage the radiation power pattern ...In this paper a non-iterative technique is developed for the correction of faulty antenna array based on matrix pencil technique（MPT）. The failure of a sensor in antenna array can damage the radiation power pattern in terms of sidelobes level and nulls. In the developed technique, the radiation pattern of the array is sampled to form discrete power pattern information set. Then this information set can be arranged in the form of Hankel matrix（HM） and execute the singular value decomposition（SVD）. By removing nonprincipal values, we obtain an optimum lower rank estimation of HM. This lower rank matrix corresponds to the corrected pattern. Then the proposed technique is employed to recover the weight excitation and position allocations from the estimated matrix. Numerical simulations confirm the efficiency of the proposed technique, which is compared with the available techniques in terms of sidelobes level and nulls.展开更多
A compact self-isolated Multi Input Multi Output (MIMO) antennaarray is presented for 5G mobile phone devices. The proposed antenna systemis operating at the 3.5 GHz band (3400–3600 MHz) and consists of eight antenna...A compact self-isolated Multi Input Multi Output (MIMO) antennaarray is presented for 5G mobile phone devices. The proposed antenna systemis operating at the 3.5 GHz band (3400–3600 MHz) and consists of eight antennaelements placed along two side edges of a mobile device, which meets the currenttrend requirements of full-screen smartphone devices. Each antenna element isdivided into two parts, a front part and back part. The front part consists of anI-shaped feeding line and a modified Hilbert fractal monopole antenna, whereasthe back part is an L-shaped element shorted to the system ground by a0.5 mm short stub. A desirable compactness can be obtained by utilizing the Hilbert space-filling property where the antenna element’s overall planar size printedon the side-edge frame is just (9.57 mm × 5.99 mm). The proposed MIMO antenna system has been simulated, analyzed, fabricated and tested. Based on the selfisolated property, good isolation (better than 15 dB) is attained without employingadditional decoupling elements and/or isolation techniques, which increases system complexity and reduces the antenna efficiency. The scattering parameters,antenna efficiencies, antenna gains, and antenna radiation characteristics areinvestigated to assess the proposed antenna performance. For evaluating the proposed antenna array system performance, the Envelope Correlation Coefficients(ECCs), Mean Effective Gains (MEGs) and channel capacity are calculated.Desirable antenna and MIMO performances are evaluated to confirm the suitability of the proposed MIMO antenna system for 5G mobile terminals.展开更多
We design a grey wolf optimizer hybridized with an interior point algorithm to correct a faulty antenna array. If a single sensor fails, the radiation power pattern of the entire array is disturbed in terms of sidelob...We design a grey wolf optimizer hybridized with an interior point algorithm to correct a faulty antenna array. If a single sensor fails, the radiation power pattern of the entire array is disturbed in terms of sidelobe level(SLL) and null depth level(NDL), and nulls are damaged and shifted from their original locations. All these issues can be solved by designing a new fitness function to reduce the error between the preferred and expected radiation power patterns and the null limitations. The hybrid algorithm has been designed to control the array's faulty radiation power pattern. Antenna arrays composed of 21 sensors are used in an example simulation scenario. The MATLAB simulation results confirm the good performance of the proposed method, compared with the existing methods in terms of SLL and NDL.展开更多
This paper discusses the design of a wideband low noise amplifier（LNA） in which specific architecture decisions were made in consideration of system-on-chip implementation for radio-astronomy applications.The LNA de...This paper discusses the design of a wideband low noise amplifier（LNA） in which specific architecture decisions were made in consideration of system-on-chip implementation for radio-astronomy applications.The LNA design is based on a novel ultra-low noise InGaAs/InAlAs/InP pHEMT.Linear and non-linear modelling of this pHEMT has been used to design an LNA operating from 2 to 4 GHz.A common-drain in cascade with a common source inductive degeneration,broadband LNA topology is proposed for wideband applications.The proposed configuration achieved a maximum gain of 27 dB and a noise figure of 0.3 dB with a good input and output return loss（S11〈—10 dB,S22〈—11 dB）.This LNA exhibits an input 1-dB compression point of-18 dBm,a third order input intercept point of 0 dBm and consumes 85 mW of power from a 1.8 V supply.展开更多
文摘A μ negative metamaterial using spiral resonator (SR) with an electromagnetically coupled (EMC) feeding system is proposed as a novel antenna structure. The proposed antenna is designed and fabricated on a FR4 dielectric substrate with a thickness of 1.6 mm and relative permittivity of 4.0 to achieve its radiation characteristic. The antenna is operated at frequency 2.4 GHz. To improve the antenna gain, a matching circuit is inserted into the feed line. The µnegative metamaterial is achieved by using a spiral resonator with spiral numbers N = 3, 5, 7, and 10. It is found that the negative imaginary part tends to shift leftward as the value of N increases. The simulation result of the proposed antenna structure with spiral number N = 3, strip width w = 3.1 mm, and gap width s = 0.5 mm provides the best performance with S11 = -15 dB, VSWR < 2 bandwidth of 30 MHz and gain of –0.5 dB at frequency of 2.43 GHz. The proposed antenna with matching circuit provides the antenna gain of 2.21 dB, which is better than that without the matching circuit. The dimensions of the proposed antenna are reduced by 53% compared with those of the conventional patch. Both the simulation and measurement results of the radiation characteristics of the proposed antenna show good agreement.
基金sypported by the Research Management Centre(RMC),School of Postgraduate Studies(SPS),Communication Engineering Department,Faculty of Electrical Engineering(FKE),Universiti Teknologi Malaysia(UTM),Johor Bahru(Grant Nos.12H09 and 03E20)
文摘In this paper a non-iterative technique is developed for the correction of faulty antenna array based on matrix pencil technique（MPT）. The failure of a sensor in antenna array can damage the radiation power pattern in terms of sidelobes level and nulls. In the developed technique, the radiation pattern of the array is sampled to form discrete power pattern information set. Then this information set can be arranged in the form of Hankel matrix（HM） and execute the singular value decomposition（SVD）. By removing nonprincipal values, we obtain an optimum lower rank estimation of HM. This lower rank matrix corresponds to the corrected pattern. Then the proposed technique is employed to recover the weight excitation and position allocations from the estimated matrix. Numerical simulations confirm the efficiency of the proposed technique, which is compared with the available techniques in terms of sidelobes level and nulls.
文摘A compact self-isolated Multi Input Multi Output (MIMO) antennaarray is presented for 5G mobile phone devices. The proposed antenna systemis operating at the 3.5 GHz band (3400–3600 MHz) and consists of eight antennaelements placed along two side edges of a mobile device, which meets the currenttrend requirements of full-screen smartphone devices. Each antenna element isdivided into two parts, a front part and back part. The front part consists of anI-shaped feeding line and a modified Hilbert fractal monopole antenna, whereasthe back part is an L-shaped element shorted to the system ground by a0.5 mm short stub. A desirable compactness can be obtained by utilizing the Hilbert space-filling property where the antenna element’s overall planar size printedon the side-edge frame is just (9.57 mm × 5.99 mm). The proposed MIMO antenna system has been simulated, analyzed, fabricated and tested. Based on the selfisolated property, good isolation (better than 15 dB) is attained without employingadditional decoupling elements and/or isolation techniques, which increases system complexity and reduces the antenna efficiency. The scattering parameters,antenna efficiencies, antenna gains, and antenna radiation characteristics areinvestigated to assess the proposed antenna performance. For evaluating the proposed antenna array system performance, the Envelope Correlation Coefficients(ECCs), Mean Effective Gains (MEGs) and channel capacity are calculated.Desirable antenna and MIMO performances are evaluated to confirm the suitability of the proposed MIMO antenna system for 5G mobile terminals.
基金supported by the Ministry of Higher Education(MOHE)the Research Management Centre(RMC)+2 种基金the School of Postgraduate Studies(SPS)the Communication Engineering Department,the Faculty of Electrical Engineering(FKE)Universiti T¨ekùnolóogi Malaysia(UTM)Johor Bahru(Nos.12H09 and 03E20tan)
文摘We design a grey wolf optimizer hybridized with an interior point algorithm to correct a faulty antenna array. If a single sensor fails, the radiation power pattern of the entire array is disturbed in terms of sidelobe level(SLL) and null depth level(NDL), and nulls are damaged and shifted from their original locations. All these issues can be solved by designing a new fitness function to reduce the error between the preferred and expected radiation power patterns and the null limitations. The hybrid algorithm has been designed to control the array's faulty radiation power pattern. Antenna arrays composed of 21 sensors are used in an example simulation scenario. The MATLAB simulation results confirm the good performance of the proposed method, compared with the existing methods in terms of SLL and NDL.
文摘This paper discusses the design of a wideband low noise amplifier（LNA） in which specific architecture decisions were made in consideration of system-on-chip implementation for radio-astronomy applications.The LNA design is based on a novel ultra-low noise InGaAs/InAlAs/InP pHEMT.Linear and non-linear modelling of this pHEMT has been used to design an LNA operating from 2 to 4 GHz.A common-drain in cascade with a common source inductive degeneration,broadband LNA topology is proposed for wideband applications.The proposed configuration achieved a maximum gain of 27 dB and a noise figure of 0.3 dB with a good input and output return loss（S11〈—10 dB,S22〈—11 dB）.This LNA exhibits an input 1-dB compression point of-18 dBm,a third order input intercept point of 0 dBm and consumes 85 mW of power from a 1.8 V supply.
