Mg alloys with a combination of high strength and excellent ductility are increasingly required for structural applications.This study investigates the influence of advanced processing techniques on the mechanical pro...Mg alloys with a combination of high strength and excellent ductility are increasingly required for structural applications.This study investigates the influence of advanced processing techniques on the mechanical properties and microstructural evolution of Mg-Gd-Y-Zn-Zr alloys.Utilizing a combination of double extrusion and stepwise hot rolling followed by aging treatments,significant enhancements in the mechanical performance of these alloys are demonstrated.The processing techniques applied lead to notable refinement in grain-size and modifications in the microstructure,including the transformation of LPSO phases from 18R to 24R and the dispersion of β phase particles.These microstructural transformations contribute to a substantial increase in yield-strength,ultimate-tensile-strength,and ductility.Furthermore,findings reveal that these improvements are also supported by alterations in material texture,which influence dislocation dynamics as indicated by changes in Kernel Average Misorientation(KAM)values.The combined effect of grain boundary(GB)strengthening,phase distribution,and texture modification elucidates the observed mechanical enhancements.This research provides valuable insights into the design and optimization of Mg-Gd-Y-Zn-Zr alloys for critical applications in aerospace and automotive industries where high strength and ductility are paramount.展开更多
This study explores the bioconvective behavior of a Reiner-Rivlin nanofluid,accounting for spatially varying thermal properties.The flow is considered over a porous,stretching surface with mass suction effects incorpo...This study explores the bioconvective behavior of a Reiner-Rivlin nanofluid,accounting for spatially varying thermal properties.The flow is considered over a porous,stretching surface with mass suction effects incorporated into the transport analysis.The Reiner-Rivlin nanofluid model includes variable thermal conductivity,mass diffusivity,and motile microorganism density to accurately reflect realistic biological conditions.Radiative heat transfer and internal heat generation are considered in the thermal energy equation,while the Cattaneo-Christov theory is employed to model non-Fourier heat and mass fluxes.The governing equations are non-dimensionalized to reduce complexity,and a numerical solution is obtained using a shooting method.Parametric studies are conducted to examine the influence of key dimensionless parameters on velocity,temperature,concentration,and motile microorganism profiles.The results are presented through a series of graphs,offering insight into the dynamic interplay between physical mechanisms affecting heat and mass transfer in non-Newtonian bioconvective nanofluid systems.展开更多
Benefits of RE addition on Mg alloys strength and corrosion resistance are widely reported but their effects on biodegradability and biocompatibility are still of concern.This paper investigates the effect of RE addit...Benefits of RE addition on Mg alloys strength and corrosion resistance are widely reported but their effects on biodegradability and biocompatibility are still of concern.This paper investigates the effect of RE additions on biodegradability of Mg-Zn alloys under simulated physiological conditions.In this context,two commercial Mg-Zn-Zr-RE alloys,namely ZE41 and EZ33,with same RE addition but different concentrations are studied in Hank’s Balanced Salt Solution(HBSS)at 37℃and with pH of 7.4.Weight-loss,hydrogen evolution,real-time insitu drop test,electrochemical impedance spectroscopy(EIS)and potentiodynamic polarization are deployed to study corrosion characteristics.The mechanical integrity of both alloys is assessed by mechanical testing post immersion.Furthermore,in vitro biocompatibility is evaluated by indirect cytotoxicity tests using NIH3T3 cells.Results reveal that although both alloys showed similar microstructure,size and distribution of precipitates played a significant role on its corrosion response.EIS and open circuit potential results show stable film formation on EZ33,while ZE41 showed passive layer formation followed by its deterioration,over the analyzed time period.Using real-time drop test,it was shown in ZE41 alloy that both T-phase and Zr-rich precipitates acted as micro cathodes,resulting in an unstable surface film.In EZ33,Zr-rich regions did not influence corrosion response,resulting in better corrosion resistance that was corroborated by post-immersion surface morphology investigations.The higher degradation observed in ZE41 alloy resulted in higher drop in flexural and tensile strength compared to EZ33 alloy.In addition,cytotoxicity tests on NIH3T3 cells revealed that cell viability of EZ33 increased with increasing incubation time,contrary to ZE41,owing to its lower biodegradation behavior and despite higher concentrations of REs.Present results show that an increase in RE concentration in EZ33,relative to ZE41,had a positive effect on corrosion rate that subsequently controlled alloy mechanical integrity and biocompatibility.展开更多
In this paper,we used Corn Stalk(CS)as a renewable and economical bio template to fabricate willemite scaffolds with the potential application in skull bone repair.CS was used as a sacrificial template to synthesize t...In this paper,we used Corn Stalk(CS)as a renewable and economical bio template to fabricate willemite scaffolds with the potential application in skull bone repair.CS was used as a sacrificial template to synthesize the scaffolds.Willemite scaffolds with the chemical formula of Zn2SiO4 and pore size in the range of 3 to 10µm could be successfully synthesized by soaking CS in the willemite solution for 24 h and sintering at 950°C for 5 h.The porosity of the samples was controlled by the soaking time(between 12 and 48 h)in the willemite solution from 5 to 35%,respectively.The properties of these scaffolds showed a good approximation with cranial bone tissue.In addition,cytotoxicity assays(MTT)were performed on Human Bone Marrow Stromal cells(HBMSc)and A172 human glioblastoma cell lines by direct and indirect culture methods to estimate their toxicity for bone and nerve cells,respectively.Alkaline Phosphatase(ALP)activity and DAPI/Phalloidin cell staining were also performed to investigate the efficiency of the scaffolds for bone tissue engineering applications.The results showed that the scaffolds had good biocompatibility with both HBMSC and A172 cells,noticeable improvement on ALP activity,and great apatite formation ability in Simulated Body Fluid(SBF).All the evidence ascertained that willemite scaffolds made by corn stalks could be a useful candidate for bone tissue engineering applications.展开更多
Magnesium(Mg)and its alloys are emerging as a structural material for the aerospace,automobile,and electronics industries,driven by the imperative of weight reduction.They are also drawing notable attention in the med...Magnesium(Mg)and its alloys are emerging as a structural material for the aerospace,automobile,and electronics industries,driven by the imperative of weight reduction.They are also drawing notable attention in the medical industries owing to their biodegradability and a lower elastic modulus comparable to bone.The ability to manufacture near-net shape products featuring intricate geometries has sparked huge interest in additive manufacturing(AM)of Mg alloys,reflecting a transformation in the manufacturing sectors.However,AM of Mg alloys presents more formidable challenges due to inherent properties,particularly susceptibility to oxidation,gas trapping,high thermal expansion coefficient,and low solidification temperature.This leads to defects such as porosity,lack of fusion,cracking,delamination,residual stresses,and inhomogeneity,ultimately influencing the mechanical,corrosion,and surface properties of AM Mg alloys.To address these issues,post-processing of AM Mg alloys are often needed to make them suitable for application.The present article reviews all post-processing techniques adapted for AM Mg alloys to date,including heat treatment,hot isostatic pressing,friction stir processing,and surface peening.The utilization of these methods within the hybrid AM process,employing interlayer post-processing,is also discussed.Optimal post-processing conditions are reported,and their influence on the microstructure,mechanical,and corrosion properties are detailed.Additionally,future prospects and research directions are proposed.展开更多
The main objective of this paper is to investigate the influence of inertia of nonlinear springs on the dispersion behavior of discrete monoatomic chains with lumped and distributed masses.The developed model can repr...The main objective of this paper is to investigate the influence of inertia of nonlinear springs on the dispersion behavior of discrete monoatomic chains with lumped and distributed masses.The developed model can represent the wave propagation problem in a non-homogeneous material consisting of heavy inclusions embedded in a matrix.The inclusions are idealized by lumped masses,and the matrix between adjacent inclusions is modeled by a nonlinear spring with distributed masses.Additionally,the model is capable of depicting the wave propagation in bi-material bars,wherein the first material is represented by a rigid particle and the second one is represented by a nonlinear spring with distributed masses.The discrete model of the nonlinear monoatomic chain with lumped and distributed masses is first considered,and a closed-form expression of the dispersion relation is obtained by the second-order Lindstedt-Poincare method(LPM).Next,a continuum model for the nonlinear monoatomic chain is derived directly from its discrete lattice model by a suitable continualization technique.The subsequent use of the second-order method of multiple scales(MMS)facilitates the derivation of the corresponding nonlinear dispersion relation in a closed form.The novelties of the present study consist of(i)considering the inertia of nonlinear springs on the dispersion behavior of the discrete mass-spring chains;(ii)developing the second-order LPM for the wave propagation in the discrete chains;and(iii)deriving a continuum model for the nonlinear monoatomic chains with lumped and distributed masses.Finally,a parametric study is conducted to examine the effects of the design parameters and the distributed spring mass on the nonlinear dispersion relations and phase velocities obtained from both the discrete and continuum models.These parameters include the ratio of the spring mass to the lumped mass,the nonlinear stiffness coefficient of the spring,and the wave amplitude.展开更多
Immersion of scaffolds in Simulated Body Fluid(10SBF)is a standardized method for evaluating their bioactivity,simulating in vivo conditions where apatite deposits can be formed on the surface of scaffold,facilitating...Immersion of scaffolds in Simulated Body Fluid(10SBF)is a standardized method for evaluating their bioactivity,simulating in vivo conditions where apatite deposits can be formed on the surface of scaffold,facilitating bone integration and ensuring their suitability for bone implant purposes,ultimately contributing to long-term implant success.The effect of apatite deposition on bioactivity and cell behavior of TiO_(2)scaffolds was studied.Scaffolds were soaked in 10SBF for different durations to form HAP layer on their surface.The results proved the development of a hydroxyapatite film resembling the mineral composition of bone Extracellular Matrix(ECM)on the TiO_(2)scaffolds.The XRD test findings showed the presence of hydroxyapatite layer similar to bone at the depth of 10 nm.A decrease in the specific surface area(18.913 m^(2)g^(−1)),the total pore volume(0.045172 cm^(3)g^(−1)(at p/p0=0.990)),and the mean pore diameter(9.5537 nm),were observed by BET analysis which confirmed the formation of the apatite layer.It was found that titania scaffolds with HAP coating promoted human osteosarcoma bone cell(MG63)cell attachment and growth.It seems that immersing the scaffolds in 10SBF to form HAP coating before utilizing them for bone tissue engineering applications might be a good strategy to promote bioactivity,cell attachment,and implant fixation.展开更多
In this study, highly porous forsterite scaffolds with interconnected porosities were synthesized using multi-step sintering(MSS) method. The starting powder was nanosized forsterite, which was synthesized from talc a...In this study, highly porous forsterite scaffolds with interconnected porosities were synthesized using multi-step sintering(MSS) method. The starting powder was nanosized forsterite, which was synthesized from talc and magnesium carbonate powders. The phase composition, average particle size and morphology of the produced forsterite powder were characterized by X-ray diffraction technique(XRD) and transition electron microscopy(TEM). Forsterite scaffolds were produced by foamy method using polymeric sponges. MSS process including three steps was used to efficiently sinter the forsterite nanopowders without destroying the initial porous structure of polymeric sponges. The results showed that MSS technique is an efficient and appropriate procedure to produce highly porous forsterite scaffolds with pore size in the range of 100-300 μm. The compressive strength, compressive modulus and porosity of C12 specimen(sintered at 1650℃ for 1 h with subsequent annealing at 1000℃ for 1000 min) was 1.88 MPa, 29.2 MPa, and 72.4%, respectively, which is very close to that of cancellous bone. The approach studied in this research can be developed for other nanostructure ceramics to produce highly porous scaffolds with interconnected porosities for load bearing applications.展开更多
Failure of arteriovenous fistulas(AVF) to mature and thrombosis in matured fistulas have been the major causes of morbidity and mortality in hemodialysis patients. Stenosis, which occurs due to adverse remodeling in A...Failure of arteriovenous fistulas(AVF) to mature and thrombosis in matured fistulas have been the major causes of morbidity and mortality in hemodialysis patients. Stenosis, which occurs due to adverse remodeling in AVFs, is one of the major underlying factors under both scenarios. Early diagnosis of a stenosis in an AVF can provide an opportunity to intervene in a timelymanner for either assisting the maturation process or avoiding the thrombosis. The goal of surveillance strategies was to supplement the clinical evaluation(i.e., physical examination) of the AVF for better and earlier diagnosis of a developing stenosis. Surveillance strategies were mainly based on measurement of functional hemodynamic endpoints, including blood flow(Q a) to the vascular access and venous access pressure(VAP). As the changes in arterial pressure(MAP) affects the level of VAP, the ratio of VAP to MAP(VAPR = VAP/MAP) was used for diagnosis. A Q a < 400-500 m L/min or a VAPR > 0.55 is considered sign of significant stenosis, which requires immediate intervention. However, due to the complex nature of AVFs, the surveillance strategies have failed to consistently detect stenosis under different scenarios. VAPR has been primarily developed to detect outflow stenosis in arteriovenous grafts, and it hasn't been successful in accurate diagnosis of outflow lesions in AVFs. Similarly, AVFs can maintain relatively high blood flow despite the presence of a significant outflow stenosis and thus, Q a has been found to be a better predictor of only inflow lesions. Similar shortcomings have been reported in the detection of functional severity of coronary stenosis using diagnostic endpoints that were based on either flow or pressure. This limitation has been associated with the fact that both pressure and flow change in the presence of a stenosis and thus, hemodynamic diagnostic endpoints that employ only one of these parameters are inherently prone to inaccuracies. Recent attempts have resulted in development of new diagnostic endpoints that can combine the effects of pressure and flow. These new hemodynamic diagnostic endpoints have shown to be better predictors of functional severity of lesions as compared to either flow or pressure based counterparts. In this review article, we discussed the advantages and limitations of current functional and anatomical diagnostic endpoints in AVFs.展开更多
Okinawa in the subtropical islands enclosed in the ocean has a problem that corrosion of structures progresses quickly because of high temperature, high humidity and adhesion of sea-water mists flying from sea. Author...Okinawa in the subtropical islands enclosed in the ocean has a problem that corrosion of structures progresses quickly because of high temperature, high humidity and adhesion of sea-water mists flying from sea. Author is interested in corrosion of bridge made of weatherability steel. Therefore, it needs to investigate the flow structure around bridge beams and behavior of sea-water mist (droplet). In this paper, flow visualization and PIV are attempted to understand the flow structures around bridge beams and, furthermore, numerical approach of motion of droplets is attempted to understand the collision of sea-water mists on the bridge wall.展开更多
Three speed controllers for an axial magnetic flux switched reluctance motor with only one stator, are described and experimentally tested. As it is known, when current pulses are imposed in their windings, high rippl...Three speed controllers for an axial magnetic flux switched reluctance motor with only one stator, are described and experimentally tested. As it is known, when current pulses are imposed in their windings, high ripple torque is obtained. In order to reduce this ripple, a control strategy with modified current shapes is proposed. A workbench consisting of a machine prototype and the control system based on a microcontroller was built. These controllers were: a conventional PID, a fuzzy logic PID and a neural PID type. From experimental results, the effective reduction of the torque ripple was confirmed and the performance of the controllers was compared.展开更多
The outlook concerning the occurrence of industrial accidents has led to the implementation of response systems based on geoprocessing tools, which are widely adopted in emergency for such ventures, since they have he...The outlook concerning the occurrence of industrial accidents has led to the implementation of response systems based on geoprocessing tools, which are widely adopted in emergency for such ventures, since they have helped and served as a support for decision making, as well as for the preparation of guidelines aimed at managing emergencies. Nuclear power plants, because they constitute types of industrial activities that present dangerous conditions and attention regarding security are characterized as hazardous, especially due to consequences that occurred from large accidents— such as Chernobyl (1986) and Fukushima (2011)—highlighting the importance to its negative impacts, since the occurrence of accidents at nuclear power plants may affect surrounding areas, thus exposing a set of elements that are part of the environmental dynamics that integrates the catchment area where this type of plant is situated. In this way, through an integrated view of the region where the nuclear complex is located in Angra dos Reis City (Rio de Janeiro State) and, also, by aggregating information that portray the geobiophysical reality of its surroundings, several elements were incorporated into a database developed in a virtual environment, in which was produced a geographic information system (GIS) that presents a complex of variables that, once considered, can enhance various analysis in order to support emergency situations and planning, as well as guidelines that help define actions from the occurrence of accidental events at the nuclear plant.展开更多
Biogas fuel is a sustainable and renewable fuel produced from anaerobic digestion of organic matter. The biogas fuel is a flammable mixture of methane and carbon dioxide with low to medium calorific values. Biogas is ...Biogas fuel is a sustainable and renewable fuel produced from anaerobic digestion of organic matter. The biogas fuel is a flammable mixture of methane and carbon dioxide with low to medium calorific values. Biogas is an alternative to conventional fossil fuels and can be used for beating, transportation and power generation. CFD （computational fluid dynamic） analysis of the combustion performance and emissions of biogas fuel in gas turbine engines is presented in this study. The main objective of this study is to understand the impact of the variability in the biogas fuel compositions and lower heating values on the combustion process. Natural gas, biogas from anaerobic digester, landfill biogas, and natural gas/biogas mixture fuels combustion were investigated in this study. The CFD results show lower peak flame temperature and CO mole fractions inside the combustor and lower NOx emissions at the combustor exit for the biogas compared to natural gas fuel. The peak flame temperature decreases by 37% for the biogas landfill （COJCH4 = 0.89） and by 22% for the biogas anaerobic digester （CO2/CH4 = 0.54） compared to natural gas fuel combustion. The peak CO mole fraction inside the combustor decreases from 9.8 × 10-2 for natural gas fuel to 2.22 × 10-4 for biogas anaerobic digester and 1.32 × 10-7 for biogas landfill. The average NOx mole fraction at the combustor exit decreases from 1.13 × 10-5 for natural gas fuel to 0.40 × 10-6 for biogas anaerobic digester and 1.06 × 10-6 for biogas landfill. The presence of non-combustible constituents in the biogas reduces the temperature of the flame and consequently the NOx emissions.展开更多
Grinding operation is a finishing process often employed when high precision and narrow geometric tolerances are required.These requirements can be achieved only if cutting conditions are properly selected,especially ...Grinding operation is a finishing process often employed when high precision and narrow geometric tolerances are required.These requirements can be achieved only if cutting conditions are properly selected,especially the cooling-lubrication technique.In general,grinding is performed in presence of cutting fluid,however,due to the environmental impacts and costs of the conventional coolant delivery technique(flow rates from 4 L/min to 300 L/min),alternative cooling-lubrication techniques have been developed on restriction of the coolants use.Among the several techniques,MQL(minimum quantity of lubricant)technique has received special attention from machining users because of its advantages in terms of surface quality of workpiece and drastic reduction in use of coolant.In this context,this paper evaluated the performance of the MQL technique as compared to the flood coolant in peripheral surface grinding of AISI P100(VP100)steel with conventional aluminum oxide grinding wheel in relation to the surface roughness(Ra and Rz).Input parameters tested were equivalent chip thickness(0.09μm,0.18μm and 0.27μm)and flow rate of the cutting fluid(60 mL/h,150 mL/h and 240 mL/h)of the MQL system.Results showed that the grinding with MQL technique provided lower surface roughness values compared to conventional flood cooling,especially when machining under the intermediary cutting conditions.Also,with exception of heq of 0.09 m,the MQL technique resulted in lower values of Rz parameter as compared to the conventional coolant technique,regardless of the flow rate tested.展开更多
Alternative fuel recovery from used engine lubricant(UEL)and empty fruit bunch(EFB)was achieved through microwave co-pyrolysis.Co-pyrolysis was chosen for its potential to improve the quality of pyrolytic oil by gener...Alternative fuel recovery from used engine lubricant(UEL)and empty fruit bunch(EFB)was achieved through microwave co-pyrolysis.Co-pyrolysis was chosen for its potential to improve the quality of pyrolytic oil by generating synergistic effects between two distinct feedstocks,reducing activation energy,and enhancing pyrolytic oil quality.The central composite design(CCD)of response surface methodology(RSM)was used to optimise the temperature and EFB ratio.Atomic absorption spectrometry(AAS)was employed to characterise the heavy metal concentration in the pyrolytic oil.The optimised pyrolytic oil(UE450)produced the highest oil yield(25.17 wt%)with the lowest metal concentration at 450℃with a 50%EFB ratio.The fuel’s characteristics were similar to those of conventional diesel,with a higher value of HHV(45.17 MJ/kg).However,the oil was slightly acidic,with a pH of 4.3.GC-MS analysis of UE450 revealed the presence of alkanes and monoaromatic-rich hydrocarbons.Additionally,the UE450 biochar was characterised using FTIR,FESEM,and XRF.FTIR analysis showed that the carbonyl group(C=O)peaks at 1730 and 1440 cm^(-1)disappeared,indicating that heavy metals were bound to the biochar surface.Likewise,XRF analysis of UE450 biochar revealed that zinc(Zn)exhibited a high metal adsorption capacity,following the sequence Zn>Fe>Pb(1.96,1.06,and 0.81 mmol/g).The XRF results also indicated a significant removal of SO_(3)at approximately 10.37 mmol/g.展开更多
We study the carbon dioxide reduction reaction(CO_(2)RR)activity and selectivity of Fe single-atom catalyst(Fe-SAC)and Fe dual-atom catalyst(Fe-DAC)active sites at the interior of graphene and the edges of graphitic n...We study the carbon dioxide reduction reaction(CO_(2)RR)activity and selectivity of Fe single-atom catalyst(Fe-SAC)and Fe dual-atom catalyst(Fe-DAC)active sites at the interior of graphene and the edges of graphitic nanopore by using a combination of DFT calculations and microkinetic simulations.The trend of limiting potentials for CO_(2)RR to produce CO can be described by using either the adsorption energy of COOH,CO,or their combination.CO_(2)RR process with reasonable reaction rates can be achieved only on the active site configurations with weak tendencies toward CO poisoning.The efficiency of CO_(2)RR on a catalyst depends on its ability to suppress the parasitic hydrogen evolution reaction(HER),which is directly related to the behavior of H adsorption on the catalyst’s active site.We find that the edges of the graphitic nanopore can act as potential adsorption sites for an H atom,and in some cases,the edge site can bind the H atom much stronger than the main Fe site.The linear scaling between CO and H adsorptions is broken if this condition is met.This condition also allows some edge active site configurations to have their CO_(2)RR limiting potential lower than the HER process favoring CO production over H2 production.展开更多
In the operation of a centrifugal compressor of turbocharger, instability phenomena such as rotating stall and surge are induced at a lower flow rate close to the maximum pressure ratio. In this study, for the suppres...In the operation of a centrifugal compressor of turbocharger, instability phenomena such as rotating stall and surge are induced at a lower flow rate close to the maximum pressure ratio. In this study, for the suppression of surge phenomenon resulting in the extension of the stable operating range of centrifugal compressor to lower flow rate, the compressed air at the compressor exit was re-circulated and injected into the impeller inlet by using the double injection nozzle system. The experiments were performed to find out the optimum circumferential position of the second nozzle relative to the fixed first one and the optimum inner diameter of the injection nozzles, which are able to most effectively reduce the flow rate of surge inception. Moreover, in order to examine the universality of these optimum values, the experiments were carried out for two types of compressors.展开更多
This paper investigates the frictional thermoelastic contact of a rigid spherical punch and functionally graded material(FGM)coated half-space with arbitrarily varying material properties.These material parameters inc...This paper investigates the frictional thermoelastic contact of a rigid spherical punch and functionally graded material(FGM)coated half-space with arbitrarily varying material properties.These material parameters include the elastic modulus,Poisson’s ratio,heat conduction parameter,and thermal expansion coefficient.The material parameters of the FGM coating and half-space are assumed to be temperature dependent.The spherical punch is rotated in the FGM-coated half-space at a constant angular speed.The generated frictional heat is related to the friction coefficient,contact radius,angular velocity,and contact pressure.A theoretical formula for the thermoelastic rotating contact problem is established and solved using the finite element method.The main objective of this paper is to investigate the effects of temperature dependence,gradient index,friction coefficient,angular velocity,and gradient form on the surface temperature and stresses.展开更多
Magnesium alloys containing biocompatible components show tremendous promise for applications as temporary biomedical devices. However, to ensure their safe use as biodegradeable implants, it is essential to control t...Magnesium alloys containing biocompatible components show tremendous promise for applications as temporary biomedical devices. However, to ensure their safe use as biodegradeable implants, it is essential to control their corrosion rates. In concentrated Mg alloys, a microgalvanic coupling between the α-Mg matrix and secondary precipitates exists which results in increased corrosion rate. To address this challenge, we engineered the microstructure of a biodegradable Mg-Zn-RE-Zr alloy by friction stir processing (FSP), improving its corrosion resistance and mechanical properties simultaneously. The FS processed alloy with refined grains and broken and uniformly distributed secondary precipitates showed a relatively uniform corrosion morphology accompanied with the formation of a stable passive layer on the alloy surface. In vivo corrosion evaluation of the processed alloy in a small animal model showed that the material was well-tolerated with no signs of inflammation or harmful by-products. Remarkably, the processed alloy supported bone until it healed till eight weeks with a low in vivo corrosion rate of 0.7 mm/year. Moreover, we analyzed blood and histology of the critical organs such as liver and kidney, which showed normal functionality and consistent ion and enzyme levels, throughout the 12- week study period. These results demonstrate that the processed Mg-Zn-RE-Zr alloy offers promising potential for osseointegration in bone tissue healing while also exhibiting controlled biodegradability due to its engineered microstructure. The results from the present study will have profound benefit for bone fracture management, particularly in pediatric and elderly patients.展开更多
基金financially supported by the financial supports from the National Natural Science Foundation of China(Grant No.52027805).
文摘Mg alloys with a combination of high strength and excellent ductility are increasingly required for structural applications.This study investigates the influence of advanced processing techniques on the mechanical properties and microstructural evolution of Mg-Gd-Y-Zn-Zr alloys.Utilizing a combination of double extrusion and stepwise hot rolling followed by aging treatments,significant enhancements in the mechanical performance of these alloys are demonstrated.The processing techniques applied lead to notable refinement in grain-size and modifications in the microstructure,including the transformation of LPSO phases from 18R to 24R and the dispersion of β phase particles.These microstructural transformations contribute to a substantial increase in yield-strength,ultimate-tensile-strength,and ductility.Furthermore,findings reveal that these improvements are also supported by alterations in material texture,which influence dislocation dynamics as indicated by changes in Kernel Average Misorientation(KAM)values.The combined effect of grain boundary(GB)strengthening,phase distribution,and texture modification elucidates the observed mechanical enhancements.This research provides valuable insights into the design and optimization of Mg-Gd-Y-Zn-Zr alloys for critical applications in aerospace and automotive industries where high strength and ductility are paramount.
文摘This study explores the bioconvective behavior of a Reiner-Rivlin nanofluid,accounting for spatially varying thermal properties.The flow is considered over a porous,stretching surface with mass suction effects incorporated into the transport analysis.The Reiner-Rivlin nanofluid model includes variable thermal conductivity,mass diffusivity,and motile microorganism density to accurately reflect realistic biological conditions.Radiative heat transfer and internal heat generation are considered in the thermal energy equation,while the Cattaneo-Christov theory is employed to model non-Fourier heat and mass fluxes.The governing equations are non-dimensionalized to reduce complexity,and a numerical solution is obtained using a shooting method.Parametric studies are conducted to examine the influence of key dimensionless parameters on velocity,temperature,concentration,and motile microorganism profiles.The results are presented through a series of graphs,offering insight into the dynamic interplay between physical mechanisms affecting heat and mass transfer in non-Newtonian bioconvective nanofluid systems.
基金NPRP grant#8-856-2-364 from the Qatar National Research Fund(a constituent member of the Qatar Foundation)。
文摘Benefits of RE addition on Mg alloys strength and corrosion resistance are widely reported but their effects on biodegradability and biocompatibility are still of concern.This paper investigates the effect of RE additions on biodegradability of Mg-Zn alloys under simulated physiological conditions.In this context,two commercial Mg-Zn-Zr-RE alloys,namely ZE41 and EZ33,with same RE addition but different concentrations are studied in Hank’s Balanced Salt Solution(HBSS)at 37℃and with pH of 7.4.Weight-loss,hydrogen evolution,real-time insitu drop test,electrochemical impedance spectroscopy(EIS)and potentiodynamic polarization are deployed to study corrosion characteristics.The mechanical integrity of both alloys is assessed by mechanical testing post immersion.Furthermore,in vitro biocompatibility is evaluated by indirect cytotoxicity tests using NIH3T3 cells.Results reveal that although both alloys showed similar microstructure,size and distribution of precipitates played a significant role on its corrosion response.EIS and open circuit potential results show stable film formation on EZ33,while ZE41 showed passive layer formation followed by its deterioration,over the analyzed time period.Using real-time drop test,it was shown in ZE41 alloy that both T-phase and Zr-rich precipitates acted as micro cathodes,resulting in an unstable surface film.In EZ33,Zr-rich regions did not influence corrosion response,resulting in better corrosion resistance that was corroborated by post-immersion surface morphology investigations.The higher degradation observed in ZE41 alloy resulted in higher drop in flexural and tensile strength compared to EZ33 alloy.In addition,cytotoxicity tests on NIH3T3 cells revealed that cell viability of EZ33 increased with increasing incubation time,contrary to ZE41,owing to its lower biodegradation behavior and despite higher concentrations of REs.Present results show that an increase in RE concentration in EZ33,relative to ZE41,had a positive effect on corrosion rate that subsequently controlled alloy mechanical integrity and biocompatibility.
文摘In this paper,we used Corn Stalk(CS)as a renewable and economical bio template to fabricate willemite scaffolds with the potential application in skull bone repair.CS was used as a sacrificial template to synthesize the scaffolds.Willemite scaffolds with the chemical formula of Zn2SiO4 and pore size in the range of 3 to 10µm could be successfully synthesized by soaking CS in the willemite solution for 24 h and sintering at 950°C for 5 h.The porosity of the samples was controlled by the soaking time(between 12 and 48 h)in the willemite solution from 5 to 35%,respectively.The properties of these scaffolds showed a good approximation with cranial bone tissue.In addition,cytotoxicity assays(MTT)were performed on Human Bone Marrow Stromal cells(HBMSc)and A172 human glioblastoma cell lines by direct and indirect culture methods to estimate their toxicity for bone and nerve cells,respectively.Alkaline Phosphatase(ALP)activity and DAPI/Phalloidin cell staining were also performed to investigate the efficiency of the scaffolds for bone tissue engineering applications.The results showed that the scaffolds had good biocompatibility with both HBMSC and A172 cells,noticeable improvement on ALP activity,and great apatite formation ability in Simulated Body Fluid(SBF).All the evidence ascertained that willemite scaffolds made by corn stalks could be a useful candidate for bone tissue engineering applications.
文摘Magnesium(Mg)and its alloys are emerging as a structural material for the aerospace,automobile,and electronics industries,driven by the imperative of weight reduction.They are also drawing notable attention in the medical industries owing to their biodegradability and a lower elastic modulus comparable to bone.The ability to manufacture near-net shape products featuring intricate geometries has sparked huge interest in additive manufacturing(AM)of Mg alloys,reflecting a transformation in the manufacturing sectors.However,AM of Mg alloys presents more formidable challenges due to inherent properties,particularly susceptibility to oxidation,gas trapping,high thermal expansion coefficient,and low solidification temperature.This leads to defects such as porosity,lack of fusion,cracking,delamination,residual stresses,and inhomogeneity,ultimately influencing the mechanical,corrosion,and surface properties of AM Mg alloys.To address these issues,post-processing of AM Mg alloys are often needed to make them suitable for application.The present article reviews all post-processing techniques adapted for AM Mg alloys to date,including heat treatment,hot isostatic pressing,friction stir processing,and surface peening.The utilization of these methods within the hybrid AM process,employing interlayer post-processing,is also discussed.Optimal post-processing conditions are reported,and their influence on the microstructure,mechanical,and corrosion properties are detailed.Additionally,future prospects and research directions are proposed.
基金the support of Texas A&M University at Qatar for the 2022 Sixth Cycle Seed Grant Project。
文摘The main objective of this paper is to investigate the influence of inertia of nonlinear springs on the dispersion behavior of discrete monoatomic chains with lumped and distributed masses.The developed model can represent the wave propagation problem in a non-homogeneous material consisting of heavy inclusions embedded in a matrix.The inclusions are idealized by lumped masses,and the matrix between adjacent inclusions is modeled by a nonlinear spring with distributed masses.Additionally,the model is capable of depicting the wave propagation in bi-material bars,wherein the first material is represented by a rigid particle and the second one is represented by a nonlinear spring with distributed masses.The discrete model of the nonlinear monoatomic chain with lumped and distributed masses is first considered,and a closed-form expression of the dispersion relation is obtained by the second-order Lindstedt-Poincare method(LPM).Next,a continuum model for the nonlinear monoatomic chain is derived directly from its discrete lattice model by a suitable continualization technique.The subsequent use of the second-order method of multiple scales(MMS)facilitates the derivation of the corresponding nonlinear dispersion relation in a closed form.The novelties of the present study consist of(i)considering the inertia of nonlinear springs on the dispersion behavior of the discrete mass-spring chains;(ii)developing the second-order LPM for the wave propagation in the discrete chains;and(iii)deriving a continuum model for the nonlinear monoatomic chains with lumped and distributed masses.Finally,a parametric study is conducted to examine the effects of the design parameters and the distributed spring mass on the nonlinear dispersion relations and phase velocities obtained from both the discrete and continuum models.These parameters include the ratio of the spring mass to the lumped mass,the nonlinear stiffness coefficient of the spring,and the wave amplitude.
文摘Immersion of scaffolds in Simulated Body Fluid(10SBF)is a standardized method for evaluating their bioactivity,simulating in vivo conditions where apatite deposits can be formed on the surface of scaffold,facilitating bone integration and ensuring their suitability for bone implant purposes,ultimately contributing to long-term implant success.The effect of apatite deposition on bioactivity and cell behavior of TiO_(2)scaffolds was studied.Scaffolds were soaked in 10SBF for different durations to form HAP layer on their surface.The results proved the development of a hydroxyapatite film resembling the mineral composition of bone Extracellular Matrix(ECM)on the TiO_(2)scaffolds.The XRD test findings showed the presence of hydroxyapatite layer similar to bone at the depth of 10 nm.A decrease in the specific surface area(18.913 m^(2)g^(−1)),the total pore volume(0.045172 cm^(3)g^(−1)(at p/p0=0.990)),and the mean pore diameter(9.5537 nm),were observed by BET analysis which confirmed the formation of the apatite layer.It was found that titania scaffolds with HAP coating promoted human osteosarcoma bone cell(MG63)cell attachment and growth.It seems that immersing the scaffolds in 10SBF to form HAP coating before utilizing them for bone tissue engineering applications might be a good strategy to promote bioactivity,cell attachment,and implant fixation.
文摘In this study, highly porous forsterite scaffolds with interconnected porosities were synthesized using multi-step sintering(MSS) method. The starting powder was nanosized forsterite, which was synthesized from talc and magnesium carbonate powders. The phase composition, average particle size and morphology of the produced forsterite powder were characterized by X-ray diffraction technique(XRD) and transition electron microscopy(TEM). Forsterite scaffolds were produced by foamy method using polymeric sponges. MSS process including three steps was used to efficiently sinter the forsterite nanopowders without destroying the initial porous structure of polymeric sponges. The results showed that MSS technique is an efficient and appropriate procedure to produce highly porous forsterite scaffolds with pore size in the range of 100-300 μm. The compressive strength, compressive modulus and porosity of C12 specimen(sintered at 1650℃ for 1 h with subsequent annealing at 1000℃ for 1000 min) was 1.88 MPa, 29.2 MPa, and 72.4%, respectively, which is very close to that of cancellous bone. The approach studied in this research can be developed for other nanostructure ceramics to produce highly porous scaffolds with interconnected porosities for load bearing applications.
文摘Failure of arteriovenous fistulas(AVF) to mature and thrombosis in matured fistulas have been the major causes of morbidity and mortality in hemodialysis patients. Stenosis, which occurs due to adverse remodeling in AVFs, is one of the major underlying factors under both scenarios. Early diagnosis of a stenosis in an AVF can provide an opportunity to intervene in a timelymanner for either assisting the maturation process or avoiding the thrombosis. The goal of surveillance strategies was to supplement the clinical evaluation(i.e., physical examination) of the AVF for better and earlier diagnosis of a developing stenosis. Surveillance strategies were mainly based on measurement of functional hemodynamic endpoints, including blood flow(Q a) to the vascular access and venous access pressure(VAP). As the changes in arterial pressure(MAP) affects the level of VAP, the ratio of VAP to MAP(VAPR = VAP/MAP) was used for diagnosis. A Q a < 400-500 m L/min or a VAPR > 0.55 is considered sign of significant stenosis, which requires immediate intervention. However, due to the complex nature of AVFs, the surveillance strategies have failed to consistently detect stenosis under different scenarios. VAPR has been primarily developed to detect outflow stenosis in arteriovenous grafts, and it hasn't been successful in accurate diagnosis of outflow lesions in AVFs. Similarly, AVFs can maintain relatively high blood flow despite the presence of a significant outflow stenosis and thus, Q a has been found to be a better predictor of only inflow lesions. Similar shortcomings have been reported in the detection of functional severity of coronary stenosis using diagnostic endpoints that were based on either flow or pressure. This limitation has been associated with the fact that both pressure and flow change in the presence of a stenosis and thus, hemodynamic diagnostic endpoints that employ only one of these parameters are inherently prone to inaccuracies. Recent attempts have resulted in development of new diagnostic endpoints that can combine the effects of pressure and flow. These new hemodynamic diagnostic endpoints have shown to be better predictors of functional severity of lesions as compared to either flow or pressure based counterparts. In this review article, we discussed the advantages and limitations of current functional and anatomical diagnostic endpoints in AVFs.
文摘Okinawa in the subtropical islands enclosed in the ocean has a problem that corrosion of structures progresses quickly because of high temperature, high humidity and adhesion of sea-water mists flying from sea. Author is interested in corrosion of bridge made of weatherability steel. Therefore, it needs to investigate the flow structure around bridge beams and behavior of sea-water mist (droplet). In this paper, flow visualization and PIV are attempted to understand the flow structures around bridge beams and, furthermore, numerical approach of motion of droplets is attempted to understand the collision of sea-water mists on the bridge wall.
文摘Three speed controllers for an axial magnetic flux switched reluctance motor with only one stator, are described and experimentally tested. As it is known, when current pulses are imposed in their windings, high ripple torque is obtained. In order to reduce this ripple, a control strategy with modified current shapes is proposed. A workbench consisting of a machine prototype and the control system based on a microcontroller was built. These controllers were: a conventional PID, a fuzzy logic PID and a neural PID type. From experimental results, the effective reduction of the torque ripple was confirmed and the performance of the controllers was compared.
文摘The outlook concerning the occurrence of industrial accidents has led to the implementation of response systems based on geoprocessing tools, which are widely adopted in emergency for such ventures, since they have helped and served as a support for decision making, as well as for the preparation of guidelines aimed at managing emergencies. Nuclear power plants, because they constitute types of industrial activities that present dangerous conditions and attention regarding security are characterized as hazardous, especially due to consequences that occurred from large accidents— such as Chernobyl (1986) and Fukushima (2011)—highlighting the importance to its negative impacts, since the occurrence of accidents at nuclear power plants may affect surrounding areas, thus exposing a set of elements that are part of the environmental dynamics that integrates the catchment area where this type of plant is situated. In this way, through an integrated view of the region where the nuclear complex is located in Angra dos Reis City (Rio de Janeiro State) and, also, by aggregating information that portray the geobiophysical reality of its surroundings, several elements were incorporated into a database developed in a virtual environment, in which was produced a geographic information system (GIS) that presents a complex of variables that, once considered, can enhance various analysis in order to support emergency situations and planning, as well as guidelines that help define actions from the occurrence of accidental events at the nuclear plant.
文摘Biogas fuel is a sustainable and renewable fuel produced from anaerobic digestion of organic matter. The biogas fuel is a flammable mixture of methane and carbon dioxide with low to medium calorific values. Biogas is an alternative to conventional fossil fuels and can be used for beating, transportation and power generation. CFD （computational fluid dynamic） analysis of the combustion performance and emissions of biogas fuel in gas turbine engines is presented in this study. The main objective of this study is to understand the impact of the variability in the biogas fuel compositions and lower heating values on the combustion process. Natural gas, biogas from anaerobic digester, landfill biogas, and natural gas/biogas mixture fuels combustion were investigated in this study. The CFD results show lower peak flame temperature and CO mole fractions inside the combustor and lower NOx emissions at the combustor exit for the biogas compared to natural gas fuel. The peak flame temperature decreases by 37% for the biogas landfill （COJCH4 = 0.89） and by 22% for the biogas anaerobic digester （CO2/CH4 = 0.54） compared to natural gas fuel combustion. The peak CO mole fraction inside the combustor decreases from 9.8 × 10-2 for natural gas fuel to 2.22 × 10-4 for biogas anaerobic digester and 1.32 × 10-7 for biogas landfill. The average NOx mole fraction at the combustor exit decreases from 1.13 × 10-5 for natural gas fuel to 0.40 × 10-6 for biogas anaerobic digester and 1.06 × 10-6 for biogas landfill. The presence of non-combustible constituents in the biogas reduces the temperature of the flame and consequently the NOx emissions.
基金This study was financed in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brasil(CAPES)—Finance Code 001The authors are grateful too to the FAPEMIG and the Post Graduate Program of Mechanical Engineering of UFU for financial support.Authors are also grateful to Villares Metals(Brazil)+1 种基金Saint Gobain Abrasives for supporting this work with workpiece material and wheel.One of authors thanks CNPq(PQ 2013 Project No.308067/2013)for the research scholarship and FAPEMIG project process No.PPM-00265-13 for financial supportThe authors are also thankful to ABCM for transferring the copyright of the article.
文摘Grinding operation is a finishing process often employed when high precision and narrow geometric tolerances are required.These requirements can be achieved only if cutting conditions are properly selected,especially the cooling-lubrication technique.In general,grinding is performed in presence of cutting fluid,however,due to the environmental impacts and costs of the conventional coolant delivery technique(flow rates from 4 L/min to 300 L/min),alternative cooling-lubrication techniques have been developed on restriction of the coolants use.Among the several techniques,MQL(minimum quantity of lubricant)technique has received special attention from machining users because of its advantages in terms of surface quality of workpiece and drastic reduction in use of coolant.In this context,this paper evaluated the performance of the MQL technique as compared to the flood coolant in peripheral surface grinding of AISI P100(VP100)steel with conventional aluminum oxide grinding wheel in relation to the surface roughness(Ra and Rz).Input parameters tested were equivalent chip thickness(0.09μm,0.18μm and 0.27μm)and flow rate of the cutting fluid(60 mL/h,150 mL/h and 240 mL/h)of the MQL system.Results showed that the grinding with MQL technique provided lower surface roughness values compared to conventional flood cooling,especially when machining under the intermediary cutting conditions.Also,with exception of heq of 0.09 m,the MQL technique resulted in lower values of Rz parameter as compared to the conventional coolant technique,regardless of the flow rate tested.
基金supported by the financial support provided by the Universiti Malaysia Sabah(UMS)Grants No.DN22105 and GUG0617-1/2023.
文摘Alternative fuel recovery from used engine lubricant(UEL)and empty fruit bunch(EFB)was achieved through microwave co-pyrolysis.Co-pyrolysis was chosen for its potential to improve the quality of pyrolytic oil by generating synergistic effects between two distinct feedstocks,reducing activation energy,and enhancing pyrolytic oil quality.The central composite design(CCD)of response surface methodology(RSM)was used to optimise the temperature and EFB ratio.Atomic absorption spectrometry(AAS)was employed to characterise the heavy metal concentration in the pyrolytic oil.The optimised pyrolytic oil(UE450)produced the highest oil yield(25.17 wt%)with the lowest metal concentration at 450℃with a 50%EFB ratio.The fuel’s characteristics were similar to those of conventional diesel,with a higher value of HHV(45.17 MJ/kg).However,the oil was slightly acidic,with a pH of 4.3.GC-MS analysis of UE450 revealed the presence of alkanes and monoaromatic-rich hydrocarbons.Additionally,the UE450 biochar was characterised using FTIR,FESEM,and XRF.FTIR analysis showed that the carbonyl group(C=O)peaks at 1730 and 1440 cm^(-1)disappeared,indicating that heavy metals were bound to the biochar surface.Likewise,XRF analysis of UE450 biochar revealed that zinc(Zn)exhibited a high metal adsorption capacity,following the sequence Zn>Fe>Pb(1.96,1.06,and 0.81 mmol/g).The XRF results also indicated a significant removal of SO_(3)at approximately 10.37 mmol/g.
基金supported by the Ministry of Education,Culture,Research,and Technology of the Republic of Indonesia through the‘WCR 2022’program under contract number 007/E5/PG.02.00.PT/2022.
文摘We study the carbon dioxide reduction reaction(CO_(2)RR)activity and selectivity of Fe single-atom catalyst(Fe-SAC)and Fe dual-atom catalyst(Fe-DAC)active sites at the interior of graphene and the edges of graphitic nanopore by using a combination of DFT calculations and microkinetic simulations.The trend of limiting potentials for CO_(2)RR to produce CO can be described by using either the adsorption energy of COOH,CO,or their combination.CO_(2)RR process with reasonable reaction rates can be achieved only on the active site configurations with weak tendencies toward CO poisoning.The efficiency of CO_(2)RR on a catalyst depends on its ability to suppress the parasitic hydrogen evolution reaction(HER),which is directly related to the behavior of H adsorption on the catalyst’s active site.We find that the edges of the graphitic nanopore can act as potential adsorption sites for an H atom,and in some cases,the edge site can bind the H atom much stronger than the main Fe site.The linear scaling between CO and H adsorptions is broken if this condition is met.This condition also allows some edge active site configurations to have their CO_(2)RR limiting potential lower than the HER process favoring CO production over H2 production.
文摘In the operation of a centrifugal compressor of turbocharger, instability phenomena such as rotating stall and surge are induced at a lower flow rate close to the maximum pressure ratio. In this study, for the suppression of surge phenomenon resulting in the extension of the stable operating range of centrifugal compressor to lower flow rate, the compressed air at the compressor exit was re-circulated and injected into the impeller inlet by using the double injection nozzle system. The experiments were performed to find out the optimum circumferential position of the second nozzle relative to the fixed first one and the optimum inner diameter of the injection nozzles, which are able to most effectively reduce the flow rate of surge inception. Moreover, in order to examine the universality of these optimum values, the experiments were carried out for two types of compressors.
基金supported by the National Natural Science Foundation of China(Grant Nos.11725207 and 12021002)。
文摘This paper investigates the frictional thermoelastic contact of a rigid spherical punch and functionally graded material(FGM)coated half-space with arbitrarily varying material properties.These material parameters include the elastic modulus,Poisson’s ratio,heat conduction parameter,and thermal expansion coefficient.The material parameters of the FGM coating and half-space are assumed to be temperature dependent.The spherical punch is rotated in the FGM-coated half-space at a constant angular speed.The generated frictional heat is related to the friction coefficient,contact radius,angular velocity,and contact pressure.A theoretical formula for the thermoelastic rotating contact problem is established and solved using the finite element method.The main objective of this paper is to investigate the effects of temperature dependence,gradient index,friction coefficient,angular velocity,and gradient form on the surface temperature and stresses.
文摘Magnesium alloys containing biocompatible components show tremendous promise for applications as temporary biomedical devices. However, to ensure their safe use as biodegradeable implants, it is essential to control their corrosion rates. In concentrated Mg alloys, a microgalvanic coupling between the α-Mg matrix and secondary precipitates exists which results in increased corrosion rate. To address this challenge, we engineered the microstructure of a biodegradable Mg-Zn-RE-Zr alloy by friction stir processing (FSP), improving its corrosion resistance and mechanical properties simultaneously. The FS processed alloy with refined grains and broken and uniformly distributed secondary precipitates showed a relatively uniform corrosion morphology accompanied with the formation of a stable passive layer on the alloy surface. In vivo corrosion evaluation of the processed alloy in a small animal model showed that the material was well-tolerated with no signs of inflammation or harmful by-products. Remarkably, the processed alloy supported bone until it healed till eight weeks with a low in vivo corrosion rate of 0.7 mm/year. Moreover, we analyzed blood and histology of the critical organs such as liver and kidney, which showed normal functionality and consistent ion and enzyme levels, throughout the 12- week study period. These results demonstrate that the processed Mg-Zn-RE-Zr alloy offers promising potential for osseointegration in bone tissue healing while also exhibiting controlled biodegradability due to its engineered microstructure. The results from the present study will have profound benefit for bone fracture management, particularly in pediatric and elderly patients.
