The precipitation of secondary Laves phases and its effect on notch sensitivity are systematically studied in Thermo-Span alloy. The results show that the precipitation peak temperature of secondary Laves phases is 9...The precipitation of secondary Laves phases and its effect on notch sensitivity are systematically studied in Thermo-Span alloy. The results show that the precipitation peak temperature of secondary Laves phases is 925 ℃. Below 925 ℃, the volume fraction of secondary Laves phases increases with the rise of the temperature, and its morphology changes from granular to thin-film;above 925 ℃, the volume fraction of secondary Laves phases shows an opposite trend to temperature, and its morphology changes from thin-film to granular. A detailed explanation through linear density (ρ) is provided that the influence of secondary Laves phases at the grain boundaries (GBs) on notch sensitivity depends on the coupling competition effect of their size, quantity, and morphology. Notably, the granular Laves phases are more beneficial to improving the notch sensitivity of the alloy compared with thin-film Laves phases. Granular secondary Laves phases can promote the formation of γ′ phases depletion zone to improve the ability of GBs to accommodate high strain localization, and effectively inhibit the crack initiation and propagation.展开更多
In order to satisfy the increasing demand on high performance planetary transmissions, an important line of research is focused on the understanding of some of the underlying phenomena involved in this mechanical syst...In order to satisfy the increasing demand on high performance planetary transmissions, an important line of research is focused on the understanding of some of the underlying phenomena involved in this mechanical system. Through the development of models capable of reproduce the system behavior, research in this area contributes to improve gear transmission insight, helping developing better maintenance practices and more efficient design processes. A planetary gear model used for the design of profile modifications ratio based on the levelling of the load sharing ratio is presented. The gear profile geometry definition, following a vectorial approach that mimics the real cutting process of gears, is thoroughly described. Teeth undercutting and hypotrochoid definition are implicitly considered, and a procedure for the incorporation of a rounding arc at the tooth tip in order to deal with corner contacts is described. A procedure for the modeling of profile deviations is presented, which can be used for the introduction of both manufacturing errors and designed profile modifications. An easy and flexible implementation of the profile deviation within the planetary model is accomplished based on the geometric overlapping. The contact force calculation and dynamic implementation used in the model are also introduced, and parameters from a real transmission for agricultural applications are presented for the application example. A set of reliefs is designed based on the levelling of the load sharing ratio for the example transmission, and finally some other important dynamic factors of the transmission are analyzed to assess the changes in the dynamic behavior with respect to the non-modified case. Thus, the main innovative aspect of the proposed planetary transmission model is the capacity of providing a simulated load sharing ratio which serves as design variable for the calculation of the tooth profile modifications.展开更多
A nonlinear beam formulation is presented based on the Gurtin-Murdoch surface elasticity and the modified couple stress theory. The developed model theoretically takes into account coupled effects of the energy of sur...A nonlinear beam formulation is presented based on the Gurtin-Murdoch surface elasticity and the modified couple stress theory. The developed model theoretically takes into account coupled effects of the energy of surface layer and microstructures size- dependency. The mid-plane stretching of a beam is incorporated using von-Karman nonlinear strains. Hamilton＇s principle is used to determine the nonlinear governing equation of motion and the corresponding boundary conditions. As a case study, pull-in instability of an electromechanical nano-bridge structure is studied using the proposed formulation. The nonlinear governing equation is solved by the analytical reduced order method （ROM） as well as the numerical solution. Effects of various parameters including surface layer, size dependency, dispersion forces, and structural damping on the pull- in parameters of the nano-bridges are discussed. Comparison of the results with the literature reveals capability of the present model in demonstrating the impact of nano- scale phenomena on the pull-in threshold of the nano-bridges.展开更多
The hydrogel wound dressing based on polyvinyl alcohol （PVA） was prepared by the freezing-thawing cyclic method. The dehydration kinetics of prepared hydrogels was determined using the experimental method and mathem...The hydrogel wound dressing based on polyvinyl alcohol （PVA） was prepared by the freezing-thawing cyclic method. The dehydration kinetics of prepared hydrogels was determined using the experimental method and mathematical modeling based on diffusion mechanism. The results show that the dehydration rate of PVA hydrogel wound dressing inversely depends on the hydrogel thickness as well as water content of the wound. On the other hand, the initial water content of hydrogel and the atmospheric humidity have little direct effect on the dehydration rate. The good agreement between experimental and mathematical modeling results in early stages of dehydration process shows that the predominate factor determining the dehydration of these wound dressings is diffusion.展开更多
A three-dimensional incompressible annular jet is simulated by the large eddy simulation(LES)method at a Reynolds number Re=8500.The time-averaged velocity field shows an asymmetric wake behind the central bluff-body ...A three-dimensional incompressible annular jet is simulated by the large eddy simulation(LES)method at a Reynolds number Re=8500.The time-averaged velocity field shows an asymmetric wake behind the central bluff-body although the flow geometry is symmetric.The proper orthogonal decomposition(POD)analysis of the velocity fluctuation vectors is conducted to study the flow dynamics of the wake flow.The distribution of turbulent kinetic energy across the three-dimensional POD modes shows that the first four eigenmodes each capture more than 1%of the turbulent kinetic energy,and hence their impact on the wake dynamics is studied.The results demonstrate that the asymmetric mean flow in the near-field of the annular jet is related to the first two POD modes which correspond to a radial shift of the stagnation point.The modes 3 and 4 involve the stretching or squeezing effects of the recirculation region in the radial direction.In addition,the spatial structure of these four POD eigenmodes also shows the counter-rotating vortices in the streamwise direction downstream of the flow reversal region.展开更多
It is well-recognized that the electromechanical response of a nanostructure is affected by its element size. In the present article, the size dependent stability behavior and nanotweezers fabricated from nanowires ar...It is well-recognized that the electromechanical response of a nanostructure is affected by its element size. In the present article, the size dependent stability behavior and nanotweezers fabricated from nanowires are investigated by modified couple stress elasticity （MCSE）. The governing equation of the nanotweezers is obtained by taking into account the presence of Coulomb and intermolecular attractions. To solve the equation, four techniques, i.e., the modified variational iteration method （MVIM）, the monotonic iteration method （MIM）, the MAPLE numerical solver, and a lumped model, are used. The variations of the arm displacement of the tweezers versus direct current （DC） voltage are obtained. The instability parameters, i.e., pull-in voltage and deflection of the system, are computed. The results show that size-dependency will affect the stability of the nanotweezers significantly if the diameter of the nanowire is of the order of the length scale. The impact of intermolecular attraction on the size-dependent stability of the system is discussed.展开更多
Continuous glass melting tanks represent thermo-chemical reactors with very complex flow patterns. Controlling the flow patterns within the glass melting tanks with the aim of improving their performance is one of the...Continuous glass melting tanks represent thermo-chemical reactors with very complex flow patterns. Controlling the flow patterns within the glass melting tanks with the aim of improving their performance is one of the glass industry primary challenges. The tank performance is basically determined by the RTD （residence time distribution） of the glass melt, which directly impacts the glass quality and energy distribution. In the present work, numerical simulations are carried out on the electromagnetic flow control to investigate how well the flow can be controlled by externally generated electromagnetic （Lorenz） forces that are added to the glass melt. Furthermore, the melting tanks are equipped with supplementary electric heating systems called ＂electric boosters＂. The desired result would be an improved RTD. The electromagnetic flow control is called ＂electromagnetic boosting＂ and can be realized by exposing the glass bath to an external magnetic field generating Lorentz forces on the glass melt as an additional flow component. The numerical simulations of the present study require coupled calculations of electromagnetic field, flow field, and temperature field, because the material properties of glass melt are strongly temperature-dependent. The computational results show that electromagnetic boosting is an excellent way of improving the RTD in glass melting tanks, ultimately resulting in better glass quality and increased productivity. Of course, the glass industry is highly interested in achieving exactly this result.展开更多
The mechanical stability, a key problem for the 3rd synchrotron light source, is essential for the electron beam performance. This paper analyzes the influences of the first eigenfrequency and Q value on the mechanica...The mechanical stability, a key problem for the 3rd synchrotron light source, is essential for the electron beam performance. This paper analyzes the influences of the first eigenfrequency and Q value on the mechanical stability. Then the research on the improvement of the mechanical stability for the magnet girder assemblies (MGAs) and the dipole concrete assemblies (DCAs), both of which are the main parts of the Shanghai Synchrotron Radiation Faculty (SSRF), is performed. The measurement result shows that the mechanical stability is improved obviously for the MGAs by using the auxiliary supports and for the DCAs by using polymer-modification concrete instead of common concrete. The paper can give some guidance to the mechanical design of the 3rd generation light sources.展开更多
Rapid prototyping (RP) is a computerized fabrication technology that additively builds highly complex three-dimensional physical objects layer by layer using data generated by computer, for example CAD or digital grap...Rapid prototyping (RP) is a computerized fabrication technology that additively builds highly complex three-dimensional physical objects layer by layer using data generated by computer, for example CAD or digital graphic. Three-dimensional printing (3DP) is one of such technologies that employ ink-jet printing technology for processing powder materials. During fabrication, a printer head is used to print a liquid on to thin layers of powder following the object’s profile as generated by the system computer. This work looks at redesigning 3DP machine, using piezoelectric demand-mode technology head in order to improve accuracy, surface finishing and color quality of constructed models. The layers created with aforesaid system are between 25 to 150 μm (steps of 25 μm).展开更多
文摘The precipitation of secondary Laves phases and its effect on notch sensitivity are systematically studied in Thermo-Span alloy. The results show that the precipitation peak temperature of secondary Laves phases is 925 ℃. Below 925 ℃, the volume fraction of secondary Laves phases increases with the rise of the temperature, and its morphology changes from granular to thin-film;above 925 ℃, the volume fraction of secondary Laves phases shows an opposite trend to temperature, and its morphology changes from thin-film to granular. A detailed explanation through linear density (ρ) is provided that the influence of secondary Laves phases at the grain boundaries (GBs) on notch sensitivity depends on the coupling competition effect of their size, quantity, and morphology. Notably, the granular Laves phases are more beneficial to improving the notch sensitivity of the alloy compared with thin-film Laves phases. Granular secondary Laves phases can promote the formation of γ′ phases depletion zone to improve the ability of GBs to accommodate high strain localization, and effectively inhibit the crack initiation and propagation.
基金Supported by the Project DPI2013-44860 funded by the Spanish Ministry of Science and Technology
文摘In order to satisfy the increasing demand on high performance planetary transmissions, an important line of research is focused on the understanding of some of the underlying phenomena involved in this mechanical system. Through the development of models capable of reproduce the system behavior, research in this area contributes to improve gear transmission insight, helping developing better maintenance practices and more efficient design processes. A planetary gear model used for the design of profile modifications ratio based on the levelling of the load sharing ratio is presented. The gear profile geometry definition, following a vectorial approach that mimics the real cutting process of gears, is thoroughly described. Teeth undercutting and hypotrochoid definition are implicitly considered, and a procedure for the incorporation of a rounding arc at the tooth tip in order to deal with corner contacts is described. A procedure for the modeling of profile deviations is presented, which can be used for the introduction of both manufacturing errors and designed profile modifications. An easy and flexible implementation of the profile deviation within the planetary model is accomplished based on the geometric overlapping. The contact force calculation and dynamic implementation used in the model are also introduced, and parameters from a real transmission for agricultural applications are presented for the application example. A set of reliefs is designed based on the levelling of the load sharing ratio for the example transmission, and finally some other important dynamic factors of the transmission are analyzed to assess the changes in the dynamic behavior with respect to the non-modified case. Thus, the main innovative aspect of the proposed planetary transmission model is the capacity of providing a simulated load sharing ratio which serves as design variable for the calculation of the tooth profile modifications.
文摘A nonlinear beam formulation is presented based on the Gurtin-Murdoch surface elasticity and the modified couple stress theory. The developed model theoretically takes into account coupled effects of the energy of surface layer and microstructures size- dependency. The mid-plane stretching of a beam is incorporated using von-Karman nonlinear strains. Hamilton＇s principle is used to determine the nonlinear governing equation of motion and the corresponding boundary conditions. As a case study, pull-in instability of an electromechanical nano-bridge structure is studied using the proposed formulation. The nonlinear governing equation is solved by the analytical reduced order method （ROM） as well as the numerical solution. Effects of various parameters including surface layer, size dependency, dispersion forces, and structural damping on the pull- in parameters of the nano-bridges are discussed. Comparison of the results with the literature reveals capability of the present model in demonstrating the impact of nano- scale phenomena on the pull-in threshold of the nano-bridges.
文摘The hydrogel wound dressing based on polyvinyl alcohol （PVA） was prepared by the freezing-thawing cyclic method. The dehydration kinetics of prepared hydrogels was determined using the experimental method and mathematical modeling based on diffusion mechanism. The results show that the dehydration rate of PVA hydrogel wound dressing inversely depends on the hydrogel thickness as well as water content of the wound. On the other hand, the initial water content of hydrogel and the atmospheric humidity have little direct effect on the dehydration rate. The good agreement between experimental and mathematical modeling results in early stages of dehydration process shows that the predominate factor determining the dehydration of these wound dressings is diffusion.
文摘A three-dimensional incompressible annular jet is simulated by the large eddy simulation(LES)method at a Reynolds number Re=8500.The time-averaged velocity field shows an asymmetric wake behind the central bluff-body although the flow geometry is symmetric.The proper orthogonal decomposition(POD)analysis of the velocity fluctuation vectors is conducted to study the flow dynamics of the wake flow.The distribution of turbulent kinetic energy across the three-dimensional POD modes shows that the first four eigenmodes each capture more than 1%of the turbulent kinetic energy,and hence their impact on the wake dynamics is studied.The results demonstrate that the asymmetric mean flow in the near-field of the annular jet is related to the first two POD modes which correspond to a radial shift of the stagnation point.The modes 3 and 4 involve the stretching or squeezing effects of the recirculation region in the radial direction.In addition,the spatial structure of these four POD eigenmodes also shows the counter-rotating vortices in the streamwise direction downstream of the flow reversal region.
文摘It is well-recognized that the electromechanical response of a nanostructure is affected by its element size. In the present article, the size dependent stability behavior and nanotweezers fabricated from nanowires are investigated by modified couple stress elasticity （MCSE）. The governing equation of the nanotweezers is obtained by taking into account the presence of Coulomb and intermolecular attractions. To solve the equation, four techniques, i.e., the modified variational iteration method （MVIM）, the monotonic iteration method （MIM）, the MAPLE numerical solver, and a lumped model, are used. The variations of the arm displacement of the tweezers versus direct current （DC） voltage are obtained. The instability parameters, i.e., pull-in voltage and deflection of the system, are computed. The results show that size-dependency will affect the stability of the nanotweezers significantly if the diameter of the nanowire is of the order of the length scale. The impact of intermolecular attraction on the size-dependent stability of the system is discussed.
文摘Continuous glass melting tanks represent thermo-chemical reactors with very complex flow patterns. Controlling the flow patterns within the glass melting tanks with the aim of improving their performance is one of the glass industry primary challenges. The tank performance is basically determined by the RTD （residence time distribution） of the glass melt, which directly impacts the glass quality and energy distribution. In the present work, numerical simulations are carried out on the electromagnetic flow control to investigate how well the flow can be controlled by externally generated electromagnetic （Lorenz） forces that are added to the glass melt. Furthermore, the melting tanks are equipped with supplementary electric heating systems called ＂electric boosters＂. The desired result would be an improved RTD. The electromagnetic flow control is called ＂electromagnetic boosting＂ and can be realized by exposing the glass bath to an external magnetic field generating Lorentz forces on the glass melt as an additional flow component. The numerical simulations of the present study require coupled calculations of electromagnetic field, flow field, and temperature field, because the material properties of glass melt are strongly temperature-dependent. The computational results show that electromagnetic boosting is an excellent way of improving the RTD in glass melting tanks, ultimately resulting in better glass quality and increased productivity. Of course, the glass industry is highly interested in achieving exactly this result.
基金supported by the National Natural Science Foundation of China (Grant No. 10805072)
文摘The mechanical stability, a key problem for the 3rd synchrotron light source, is essential for the electron beam performance. This paper analyzes the influences of the first eigenfrequency and Q value on the mechanical stability. Then the research on the improvement of the mechanical stability for the magnet girder assemblies (MGAs) and the dipole concrete assemblies (DCAs), both of which are the main parts of the Shanghai Synchrotron Radiation Faculty (SSRF), is performed. The measurement result shows that the mechanical stability is improved obviously for the MGAs by using the auxiliary supports and for the DCAs by using polymer-modification concrete instead of common concrete. The paper can give some guidance to the mechanical design of the 3rd generation light sources.
文摘Rapid prototyping (RP) is a computerized fabrication technology that additively builds highly complex three-dimensional physical objects layer by layer using data generated by computer, for example CAD or digital graphic. Three-dimensional printing (3DP) is one of such technologies that employ ink-jet printing technology for processing powder materials. During fabrication, a printer head is used to print a liquid on to thin layers of powder following the object’s profile as generated by the system computer. This work looks at redesigning 3DP machine, using piezoelectric demand-mode technology head in order to improve accuracy, surface finishing and color quality of constructed models. The layers created with aforesaid system are between 25 to 150 μm (steps of 25 μm).
