This study utilizes the All-phase Fast Fourier Transform(FFT)spectral analysis phase difference technique combined with a Kaiser-Hanning hybrid convolution window to enhance the displacement resolution of Swept Source...This study utilizes the All-phase Fast Fourier Transform(FFT)spectral analysis phase difference technique combined with a Kaiser-Hanning hybrid convolution window to enhance the displacement resolution of Swept Source Optical Coherence Tomography(SS-OCT),enabling sub-nanometer level micro-vibration measurements.By employing a designed ultrasmall Gradient Index(GRIN)fiber probe,the signal-to-noise ratio(SNR)is increased to 40 dB,and the frequency estimation error of the All-phase FFT phase difference method is reduced to 10^-4.An SS-OCT system incorporating the ultra-small GRIN probe is developed and applied to micro-vibration detection experiments.The system successfully captures vibration signals from a 0.8 mm diameter micro-motor shaft,showing an increase in vibration amplitude from 2μm to 6μm after damage.Experimental results demonstrate a displacement resolution of 1 nm under optimal conditions.These findings highlight the potential of the ultra-small GRIN fiber probe-based SS-OCT system for detecting micro-mechanical damage and the effectiveness of the All-phase FFT spectral analysis phase difference method in improving the system's displacement resolution,enabling the fiber-optic SS-OCT system to maintain sub-nanometerlevel measurement precision.展开更多
With the wide application of laser in the field of skin plastic surgery, micro laser galvanometer scanner has made great progress in this field with its portability. However, the measurement method used to measure the...With the wide application of laser in the field of skin plastic surgery, micro laser galvanometer scanner has made great progress in this field with its portability. However, the measurement method used to measure the deflection angle of laser galvanometer in the narrow space of scanner with high precision remains to be studied. In this paper, an angle measurement method based on magnetic field is proposed, and the effect of the shapes of permanent magnets(PMs) on the measurement is studied by theoretical and experimental study under the condition that the maximum available space for the PMs is a 10 mm side cube. An angle measuring experimental device is set up, and the contrast experiment is carried out with different PMs which are the same as simulation. The experimental results show that cylindrical PM is more suitable than other PMs, which is consistent with the simulation results, and the maximum nonlinearity error is 0.562%. This method has the advantages of small volume,non-contact measurement, small moment of inertia, good dynamic response and no external excitation for the PMs, so it has a broad application prospect in micro laser galvanometer scanner.展开更多
Artificial intelligence(AI)has taken breathtaking leaps forward in recent years,evolving into a strategic technology for pioneering the future.The growing demand for computing power—especially in demanding inference ...Artificial intelligence(AI)has taken breathtaking leaps forward in recent years,evolving into a strategic technology for pioneering the future.The growing demand for computing power—especially in demanding inference tasks,exemplified by generative AI models such as ChatGPT—poses challenges for conventional electronic computing systems.Advances in photonics technology have ignited interest in investigating photonic computing as a promising AI computing modality.Through the profound fusion of AI and photonics technologies,intelligent photonics is developing as an emerging interdisciplinary field with significant potential to revolutionize practical applications.Deep learning,as a subset of AI,presents efficient avenues for optimizing photonic design,developing intelligent optical systems,and performing optical data processing and analysis.Employing AI in photonics can empower applications such as smartphone cameras,biomedical microscopy,and virtual and augmented reality displays.Conversely,leveraging photonics-based devices and systems for the physical implementation of neural networks enables high speed and low energy consumption.Applying photonics technology in AI computing is expected to have a transformative impact on diverse fields,including optical communications,automatic driving,and astronomical observation.Here,recent advances in intelligent photonics are presented from the perspective of the synergy between deep learning and metaphotonics,holography,and quantum photonics.This review also spotlights relevant applications and offers insights into challenges and prospects.展开更多
The Fringe Projection Profilometry(FPP)system with a single exposure time or a single projection intensity is limited by the dynamic range of the camera,which can lead to overexposure and underexposure of the image,re...The Fringe Projection Profilometry(FPP)system with a single exposure time or a single projection intensity is limited by the dynamic range of the camera,which can lead to overexposure and underexposure of the image,resulting in point cloud loss or reduced accuracy.To address this issue,unlike the pixel modulation method of projectors,we utilize the characteristics of color projectors where the intensity of the three-channel LED can be controlled independently.We propose a method for separating the projector's three-channel light intensity,combined with a color camera,to achieve single exposure and multi-intensity image acquisition.Further,the crosstalk coefficient is applied to predict the three-channel reflectance of the measured object.By integrating clustering and channel mapping,we establish a pixel-level mapping model between the projector's three-channel current and the camera's three-channel image intensity,which realizes the optimal projection current prediction and the high dynamic range(HDR)image acquisition.The proposed method allows for high-precision three-dimensional(3D)data acquisition of HDR scenes with a single exposure.The effectiveness of this method has been validated through experiments with standard planes and standard steps,showing a significant reduction in mean absolute error(44.6%)compared to existing singleexposure HDR methods.Additionally,the number of images required for acquisition is significantly reduced(by 70.8%)compared to multi-exposure fusion methods.This proposed method has great potential in various FPP-related fields.展开更多
Grating fringe projection 3D measurement techniques are extensively applied in various fields.However,in high dynamic range scenarios with significant surface reflectivity variations,uneven greyscale distribution may ...Grating fringe projection 3D measurement techniques are extensively applied in various fields.However,in high dynamic range scenarios with significant surface reflectivity variations,uneven greyscale distribution may lead to phase errors and poor reconstruction results.To address this problem,an adaptive fringe projection method is introduced.The method involves projecting two sets of dark and light fringes onto the object,enabling the full-field projection intensity map to be generated adaptively based on greyscale analysis.First,dark fringes are projected onto the object to extend exposure time as long as possible without causing overexposure in the image.Subsequently,bright fringes are projected under the same exposure settings to detect overexposed pixels,and the greyscale distribution of these overexposed points from the previous dark fringe projection is analyzed to calculate the corresponding projection intensities.Finally,absolute phase information from orthogonal fringes is used for coordinate matching,enabling the generation of adaptive projection fringe patterns.Experiments on various high dynamic range objects show that compared to conventional fringe projection binocular reconstruction method,the proposed algorithm achieves complete reconstruction of high dynamic range surfaces and shows robust performance against phase calculation errors caused by overexposure and low modulation.展开更多
Magnetic tracking technologies have a promising application in detecting the real-time position andattitude of a capsule endoscope.However,most of them need to measure the magnetic moment of a permanentmagnet(PM)embed...Magnetic tracking technologies have a promising application in detecting the real-time position andattitude of a capsule endoscope.However,most of them need to measure the magnetic moment of a permanentmagnet(PM)embedded in the capsule accurately in advance,which can cause inconvenience to practical application.To solve this problem,this paper proposes a magnetic tracking system with the capability of measuring themagnetic moment of the PM automatically.The system is constructed based on a 4×4 magnetic sensor array,whose sensing data is analyzed to determine the magnetic moment by referring to a magnetic dipole model.Withthe determined magnetic moment,a method of fusing the linear calculation and Levenberg-Marquardt algorithmsis proposed to determine the 3D position and 2D attitude of the PM.The experiments verified that the proposedsystem can achieve localization errors of 0.48 mm,0.42 mm,and 0.83 mm and orientation errors of 0.66◦,0.64◦,and 0.87◦for a PM(∅10 mm×10 mm)at vertical heights of 5 cm,10 cm,and 15 cm from the magnetic sensorarray,respectively.展开更多
Spatial angle measurement, especially the measurement of horizontal and vertical angle, is a basic method used for industrial large-scale coordinate measurement. As main equipments in use, both theodolites and laser t...Spatial angle measurement, especially the measurement of horizontal and vertical angle, is a basic method used for industrial large-scale coordinate measurement. As main equipments in use, both theodolites and laser trackers can provide very high accuracy for spatial angle measurement. However, their industrial applications are limited by low level of automation and poor parallelism. For the purpose of improving measurement efficiency, a lot of studies have been conducted and several alternative methods have been proposed. Unfortunately, all these means are either low precision or too expensive. In this paper, a novel method of spatial angle measurement based on two rotating planar laser beams is proposed and demonstrated. Photoelectric receivers placed on measured points are used to receive the rotating planner laser signals transmitted by laser transmitters. The scanning time intervals of laser planes were measured, and then measured point＇s horizontal/vertical angles can be calculated. Laser plane＇s angle parameters are utilized to establish the abstract geometric model of transmitter. Calculating formulas of receiver＇s horizontal/vertical angles have been derived. Measurement equations＇ solvability conditions and judgment method of imaginary solutions are also presented after analyzing. Proposed method for spatial angle measurement is experimentally verified through a platform consisting of one laser transmitter and one optical receiver. The transmitters used in new method are only responsible for providing rotating light plane signals carrying angle information. Receivers automatically measure scanning time of laser planes and upload data to the workstation to calculate horizontal angle and vertical angle. Simultaneous measurement of multiple receivers can be realized since there is no human intervention in measurement process .Spatial angle measurement result indicates that the repeatable accuracy of new method is better than 10＂. Proposed method can improve measurement＇s automation degree and speed while ensuring measurement accuracy.展开更多
The design of vision measurement system of double optical paths with single CCD based on the digital signal processor(DSP) is presented.Using TMS320F2812 as the intelligent control unit,the CCD driving circuit,level c...The design of vision measurement system of double optical paths with single CCD based on the digital signal processor(DSP) is presented.Using TMS320F2812 as the intelligent control unit,the CCD driving circuit,level conversion circuit and CCD output signal data acquisition and processing circuit are designed.By means of plane reflectors,the optical structure of the system is optimized,which reduces errors owing to tilt effect of the measured unit,improves measuring accuracy and makes the system more compact.Double optical paths signal data acquisition with single CCD is demonstrated.In addition,the improved resolution is enhanced up to sub-pixel level by the average polynomial interpolation algorithm.展开更多
Structural deformation monitoring of flight vehicles based on optical fiber sensing(OFS)technology has been a focus of research in the field of aerospace.After nearly 30 years of research and development,Chinese and i...Structural deformation monitoring of flight vehicles based on optical fiber sensing(OFS)technology has been a focus of research in the field of aerospace.After nearly 30 years of research and development,Chinese and international researchers have made significant advances in the areas of theory and methods,technology and systems,and ground experiments and flight tests.These advances have led to the development of OFS technology from the laboratory research stage to the engineering application stage.However,a few problems encountered in practical applications limit the wider application and further development of this technology,and thus urgently require solutions.This paper reviews the history of research on the deformation monitoring of flight vehicles.It examines various aspects of OFS-based deformation monitoring including the main varieties of OFS technology,technical advantages and disadvantages,suitability in aerospace applications,deformation reconstruction algorithms,and typical applications.This paper points out the key unresolved problems and the main evolution paradigms of engineering applications.It further discusses future development directions from the perspectives of an evolution paradigm,standardization,new materials,intelligentization,and collaboration.展开更多
Low-fi＇equency vertical vibration isolation systems play important roles in precision measurements to reduce seismic and environmental vibration noise. Several types of active vibration isolation systems have been de...Low-fi＇equency vertical vibration isolation systems play important roles in precision measurements to reduce seismic and environmental vibration noise. Several types of active vibration isolation systems have been developed. However, few researches focus on how to optimize the test mass install position in order to improve the vibration transmissibility. An active low-frequency vertical vibration isolation system based on an earlier instrument, the Super Spring, is designed and implemented. The system, which is simple and compact, consists of two stages： a parallelogram-shaped linkage to ensure vertical motion, and a simple spring-mass system. The theoretical analysis of the vibration isolation system is presented, including terms erroneously ignored before. By carefully choosing the mechanical parameters according to the above analysis and using feedback control, the resonance frequency of the system is reduced from 2.3 to 0.03 Hz, a reduction by a factor of more than 75. The vibration isolation system is installed as an inertial reference in an absolute gravimeter, where it improved the scatter of the absolute gravity values by a factor of 5. The experimental results verifies the improved performance of the isolation system, making it particularly suitable for precision experiments. The improved vertical vibration isolation system can be used as a prototype for designing high-performance active vertical isolation systems. An improved theoretical model of this active vibration isolation system with beam-pivot configuration is proposed, providing fundamental guidelines for vibration isolator design and assembling.展开更多
The orthogonally linearly polarized dual frequency Nd： YA G lasers with two quarter wave plates in laser resonator are proposed. The intra-cavity variable birefringence, which is caused by relative rotation of these ...The orthogonally linearly polarized dual frequency Nd： YA G lasers with two quarter wave plates in laser resonator are proposed. The intra-cavity variable birefringence, which is caused by relative rotation of these two wave plates in laser inner cavity, results in the frequency difference of the dual frequency laser also changeable. The theory model based on the Jones matrix is presented, as well as experimental results. The potential application of this phenomenon in precision roll-angle measurement is also discussed.展开更多
An optical fiber sensor for strain and temperature measurement based on long period fiber grating(LPFG) cascaded with fiber Bragg grating(FBG) structure has been proposed and realized both theoretically and experiment...An optical fiber sensor for strain and temperature measurement based on long period fiber grating(LPFG) cascaded with fiber Bragg grating(FBG) structure has been proposed and realized both theoretically and experimentally. Theoretical analysis shows that two microstructures with similar sensitivities cannot be used for double parameters measurement. The LPFG is micromachined by the CO_2 laser, and the FBG is micromachined by the excimer laser. For the validation and comparison, two FBGs and one LPFG are cascaded with three transmission valleys, namely FBG1 valley at 1 536.3 nm, LPFG valley at 1 551.2 nm, and FBG2 valley at 1 577.3 nm. The temperature and strain characteristics of the proposed sensor are measured at 45—70 °C and 250—500 με, respectively. The sensitivity matrix is determined by analyzing wavelength shifts and parameter response characterization of three different dips. The proposed optical fiber sensor based on LPFG cascaded with FBG structure can be efficiently used for double parameters measurement with promising application prospect and great research reference value.展开更多
With the development of power plants towards high power and intelligent operation direction,the vibrations or failures of blades,especially the last stage blades in steam turbines,happen more frequently due to the uns...With the development of power plants towards high power and intelligent operation direction,the vibrations or failures of blades,especially the last stage blades in steam turbines,happen more frequently due to the unstable operating conditions brought by flexible operation.A vibration measuring method for the shrouded blades of a steam turbine based on eddy current sensors with high frequency response is proposed,meeting the requirements of non-contact heath monitoring.The eddy current sensors produce the signals which are related to the area changing of every blade’s shroud resulting from the rotation of stator.Then an improved blade tip timing(BTT)technique is proposed to detect the vibrations of shrouded blades by measuring the arrival time of each area changing signal.A structure of eddy current sensors is developed in steam turbines and an amplitude modulation/demodulation circuit is designed to improve the response bandwidth up to 250 kHz.Vibration tests for the last stage blades of a steam turbine were carried out and the results validate the efficiency of the improved BTT technique and the high frequency response of the eddy current sensors presented.展开更多
We present a novel precise angle measurement scheme based on parallel multiplex laser feedback interferometry （PLFI）, which outputs two parallel laser beams and thus their displacement difference reflects the angle ...We present a novel precise angle measurement scheme based on parallel multiplex laser feedback interferometry （PLFI）, which outputs two parallel laser beams and thus their displacement difference reflects the angle variation of the target. Due to its ultrahigh sensitivity to the feedback light, PLFI realizes the direct non-contact measurement of non- cooperative targets. Experimental results show that PLFI has an accuracy of 8＂ within a range of 1400＂. The yaw of a guide is also measured and the experimental results agree with those of the dual-frequency laser interferometer Agilent 5529A.展开更多
Cold atom clocks have made remarkable progresses in the last two decades and played critical roles in precision measurements. Primary Cs fountain frequency standards have achieved a total uncertainty of a few parts in...Cold atom clocks have made remarkable progresses in the last two decades and played critical roles in precision measurements. Primary Cs fountain frequency standards have achieved a total uncertainty of a few parts in 1016, and the best optical clock has reached a type B uncertainty below 10-18. Besides applications in the metrology, navigation, etc.,ultra-stable and ultra-accurate atomic clocks have also become powerful tools in the basic scientific investigations. In this paper, we focus on the recent developments in the high-performance cold atomic clocks which can be used as frequency standards to calibrate atomic time scales. The basic principles, performances, and limitations of fountain clocks and optical clocks based on signal trapped ion or neutral atoms are summarized. Their applications in metrology and other areas are briefly introduced.展开更多
A simple and precise retardation measurement based on laser feedback is demonstrated. The measurement principle is based on polarization flipping induced by optical feedback from an external birefringence cavity. The ...A simple and precise retardation measurement based on laser feedback is demonstrated. The measurement principle is based on polarization flipping induced by optical feedback from an external birefringence cavity. The measured wave plate is located in the external cavity. When the length of the external cavity is tuned, the polarization states of laser will flip between two eigenstates, and the position of polarization flipping in one period of intensity modulation will vary with retardation of the wave plate. The duty ratio of two eigenstates is used to determine the retardation. Main advantages of the technique are that it is compact, low cost, fast and flexible. Especially, it is insensitive to a fluctuation of laser intensity and is suitable for on-line measurement. The experimental results have shown that the measurement uncertainty is better than 0.03° in the range 30°-150°.展开更多
It has been nearly 50 years since the first glimpse of the relationship between myopia and peripheral refractive errors. According to experiments on both animals and humans, the eyes with hyperopic peripheral vision a...It has been nearly 50 years since the first glimpse of the relationship between myopia and peripheral refractive errors. According to experiments on both animals and humans, the eyes with hyperopic peripheral vision appear to be at higher risk of developing myopia than those with myopic peripheral refractive errors. Despite the first measurement of peripheral refraction being achieved by a modified manual optometer, the concept of emmetropization triggered a rapidly increasing number of studies on peripheral aberrations. Not only the horizontal off-axis aberrations but also the meridional aberrations at different angles are measured by researchers during the development of peripheral aberrations measuring techniques. According to the differences among the working principles, a variety of techniques have been adopted for performing such measurements. The methods developed to realize the high-performance measurement involve the subject cooperating actively by rotating the head or eyes, the rotation of the whole optical path, and the combination of measurements of many light paths. This paper provides a review of the peripheral aberrations measuring techniques and their current status. This article also highlights the development trend of the measuring techniques of peripheral aberrations and practical applications of peripheral aberration measurements, such as the control of the accommodation, the measuring time, and the dynamic range problem of the wavefront sensor. Although wavefront sensing peripheral measurement is widely recognized for its capability to reveal both lower-order aberrations and higher-order aberrations, the efficiency of an autorefractometer is incomparable. The current study reveals that the most widely used peripheral aberration measurement methods are the use of an open field autorefractometer and Hartman-shack wavefront sensor-based techniques.展开更多
A laser collimating system based on 2-D position sensitive detector (PSD) is presented in this paper. The working principle of PSD is depicted in detail. A calibration device was developed to check the nonlinearity er...A laser collimating system based on 2-D position sensitive detector (PSD) is presented in this paper. The working principle of PSD is depicted in detail. A calibration device was developed to check the nonlinearity errors of PSD and a multilayer feedforward neural network based on error back-propagation algorithm was used to compensate errors. With the aid of computer-based data acquisition system, an automatic dynamic measuring process was realized. A series of experiments, including comparison tests with laser interferometer, were done to evaluate the performance of the measuring system. The experimental results show that the spatial straightness errors of guide rails can be measured with high accuracy. The maximum differences between the device and laser interferometer are 0.027 mm in Y direction, and 0.053 mm in X direction in the measuring distance of 6 m.展开更多
This paper has developed and characterized a method to produce a velocity-tunable ^87Rb cold atomic source for atomic interferometry application. Using a high speed fluorescence imaging technology, it reports that the...This paper has developed and characterized a method to produce a velocity-tunable ^87Rb cold atomic source for atomic interferometry application. Using a high speed fluorescence imaging technology, it reports that the dynamic process of the atomic source formation is observed and the source performances including the flux and the initial velocity are characterized. A tunable atomic source with the initial velocity of 1.4-2.6 m/s and the atomic source flux of 2× 10^8 - 6 × 10^9 atoms/s has been obtained with the built experimental setup.展开更多
Based on the evaluation of advantages and disadvantages of high-precision digital time interval measuring algorithms, and combined with the principle of the typical time-difference ultrasonic flow measurement, the req...Based on the evaluation of advantages and disadvantages of high-precision digital time interval measuring algorithms, and combined with the principle of the typical time-difference ultrasonic flow measurement, the requirements for the measurement of echo time of flight put forward by the ultrasonic flow measurement are analyzed. A new high-precision time interval measurement algorithm is presented, which combines the pulse counting method with the phase delay interpolation. The pulse counting method is used to ensure a large dynamic measuring range, and a double-edge triggering counter is designed to improve the accuracy and reduce the counting quantization error. The phase delay interpolation is used to reduce the quantization error of pulse counting for further improving the time measurement resolution. Test data show that the systexn for the measurement of the ultrasonic echo time of flight based on this algorithm and implemented on an Field Programmable Gate Army（FleA） needs a relatively short time for measurement, and has a measurement error of less than 105 ps.展开更多
基金funded by the National Natural Science Foundation of China (NSFC)(62405174)State Key Laboratory of Precision Measurement Technology and Instruments (Pilab2402)Fundamental Research Funds for the Central Universities (3122016C010)。
文摘This study utilizes the All-phase Fast Fourier Transform(FFT)spectral analysis phase difference technique combined with a Kaiser-Hanning hybrid convolution window to enhance the displacement resolution of Swept Source Optical Coherence Tomography(SS-OCT),enabling sub-nanometer level micro-vibration measurements.By employing a designed ultrasmall Gradient Index(GRIN)fiber probe,the signal-to-noise ratio(SNR)is increased to 40 dB,and the frequency estimation error of the All-phase FFT phase difference method is reduced to 10^-4.An SS-OCT system incorporating the ultra-small GRIN probe is developed and applied to micro-vibration detection experiments.The system successfully captures vibration signals from a 0.8 mm diameter micro-motor shaft,showing an increase in vibration amplitude from 2μm to 6μm after damage.Experimental results demonstrate a displacement resolution of 1 nm under optimal conditions.These findings highlight the potential of the ultra-small GRIN fiber probe-based SS-OCT system for detecting micro-mechanical damage and the effectiveness of the All-phase FFT spectral analysis phase difference method in improving the system's displacement resolution,enabling the fiber-optic SS-OCT system to maintain sub-nanometerlevel measurement precision.
基金supported by the Aeronautical Science Foundation of China [grant numbers 20175748009]。
文摘With the wide application of laser in the field of skin plastic surgery, micro laser galvanometer scanner has made great progress in this field with its portability. However, the measurement method used to measure the deflection angle of laser galvanometer in the narrow space of scanner with high precision remains to be studied. In this paper, an angle measurement method based on magnetic field is proposed, and the effect of the shapes of permanent magnets(PMs) on the measurement is studied by theoretical and experimental study under the condition that the maximum available space for the PMs is a 10 mm side cube. An angle measuring experimental device is set up, and the contrast experiment is carried out with different PMs which are the same as simulation. The experimental results show that cylindrical PM is more suitable than other PMs, which is consistent with the simulation results, and the maximum nonlinearity error is 0.562%. This method has the advantages of small volume,non-contact measurement, small moment of inertia, good dynamic response and no external excitation for the PMs, so it has a broad application prospect in micro laser galvanometer scanner.
基金supported by the National Natural Science Foundation of China(62035003 and 62235009).
文摘Artificial intelligence(AI)has taken breathtaking leaps forward in recent years,evolving into a strategic technology for pioneering the future.The growing demand for computing power—especially in demanding inference tasks,exemplified by generative AI models such as ChatGPT—poses challenges for conventional electronic computing systems.Advances in photonics technology have ignited interest in investigating photonic computing as a promising AI computing modality.Through the profound fusion of AI and photonics technologies,intelligent photonics is developing as an emerging interdisciplinary field with significant potential to revolutionize practical applications.Deep learning,as a subset of AI,presents efficient avenues for optimizing photonic design,developing intelligent optical systems,and performing optical data processing and analysis.Employing AI in photonics can empower applications such as smartphone cameras,biomedical microscopy,and virtual and augmented reality displays.Conversely,leveraging photonics-based devices and systems for the physical implementation of neural networks enables high speed and low energy consumption.Applying photonics technology in AI computing is expected to have a transformative impact on diverse fields,including optical communications,automatic driving,and astronomical observation.Here,recent advances in intelligent photonics are presented from the perspective of the synergy between deep learning and metaphotonics,holography,and quantum photonics.This review also spotlights relevant applications and offers insights into challenges and prospects.
文摘The Fringe Projection Profilometry(FPP)system with a single exposure time or a single projection intensity is limited by the dynamic range of the camera,which can lead to overexposure and underexposure of the image,resulting in point cloud loss or reduced accuracy.To address this issue,unlike the pixel modulation method of projectors,we utilize the characteristics of color projectors where the intensity of the three-channel LED can be controlled independently.We propose a method for separating the projector's three-channel light intensity,combined with a color camera,to achieve single exposure and multi-intensity image acquisition.Further,the crosstalk coefficient is applied to predict the three-channel reflectance of the measured object.By integrating clustering and channel mapping,we establish a pixel-level mapping model between the projector's three-channel current and the camera's three-channel image intensity,which realizes the optimal projection current prediction and the high dynamic range(HDR)image acquisition.The proposed method allows for high-precision three-dimensional(3D)data acquisition of HDR scenes with a single exposure.The effectiveness of this method has been validated through experiments with standard planes and standard steps,showing a significant reduction in mean absolute error(44.6%)compared to existing singleexposure HDR methods.Additionally,the number of images required for acquisition is significantly reduced(by 70.8%)compared to multi-exposure fusion methods.This proposed method has great potential in various FPP-related fields.
基金supported by the Science and Technology Program Project of Tianjin(No.24ZXZSSS00300).
文摘Grating fringe projection 3D measurement techniques are extensively applied in various fields.However,in high dynamic range scenarios with significant surface reflectivity variations,uneven greyscale distribution may lead to phase errors and poor reconstruction results.To address this problem,an adaptive fringe projection method is introduced.The method involves projecting two sets of dark and light fringes onto the object,enabling the full-field projection intensity map to be generated adaptively based on greyscale analysis.First,dark fringes are projected onto the object to extend exposure time as long as possible without causing overexposure in the image.Subsequently,bright fringes are projected under the same exposure settings to detect overexposed pixels,and the greyscale distribution of these overexposed points from the previous dark fringe projection is analyzed to calculate the corresponding projection intensities.Finally,absolute phase information from orthogonal fringes is used for coordinate matching,enabling the generation of adaptive projection fringe patterns.Experiments on various high dynamic range objects show that compared to conventional fringe projection binocular reconstruction method,the proposed algorithm achieves complete reconstruction of high dynamic range surfaces and shows robust performance against phase calculation errors caused by overexposure and low modulation.
基金the National Natural Science Foundation of China(Nos.52275038 and 61803347)the Shanxi Province Science Foundation for Excellent Youth(No.202203021224007)+1 种基金the Key Research and Development Plan of Shanxi Province(No.201903D321164)the Opening Foundation of Shanxi Key Laboratory of Advanced Manufacturing Technology(No.XJZZ202101)。
文摘Magnetic tracking technologies have a promising application in detecting the real-time position andattitude of a capsule endoscope.However,most of them need to measure the magnetic moment of a permanentmagnet(PM)embedded in the capsule accurately in advance,which can cause inconvenience to practical application.To solve this problem,this paper proposes a magnetic tracking system with the capability of measuring themagnetic moment of the PM automatically.The system is constructed based on a 4×4 magnetic sensor array,whose sensing data is analyzed to determine the magnetic moment by referring to a magnetic dipole model.Withthe determined magnetic moment,a method of fusing the linear calculation and Levenberg-Marquardt algorithmsis proposed to determine the 3D position and 2D attitude of the PM.The experiments verified that the proposedsystem can achieve localization errors of 0.48 mm,0.42 mm,and 0.83 mm and orientation errors of 0.66◦,0.64◦,and 0.87◦for a PM(∅10 mm×10 mm)at vertical heights of 5 cm,10 cm,and 15 cm from the magnetic sensorarray,respectively.
基金supported by Key Program of National Natural Science Foundation of China (Grant No. 50735003)
文摘Spatial angle measurement, especially the measurement of horizontal and vertical angle, is a basic method used for industrial large-scale coordinate measurement. As main equipments in use, both theodolites and laser trackers can provide very high accuracy for spatial angle measurement. However, their industrial applications are limited by low level of automation and poor parallelism. For the purpose of improving measurement efficiency, a lot of studies have been conducted and several alternative methods have been proposed. Unfortunately, all these means are either low precision or too expensive. In this paper, a novel method of spatial angle measurement based on two rotating planar laser beams is proposed and demonstrated. Photoelectric receivers placed on measured points are used to receive the rotating planner laser signals transmitted by laser transmitters. The scanning time intervals of laser planes were measured, and then measured point＇s horizontal/vertical angles can be calculated. Laser plane＇s angle parameters are utilized to establish the abstract geometric model of transmitter. Calculating formulas of receiver＇s horizontal/vertical angles have been derived. Measurement equations＇ solvability conditions and judgment method of imaginary solutions are also presented after analyzing. Proposed method for spatial angle measurement is experimentally verified through a platform consisting of one laser transmitter and one optical receiver. The transmitters used in new method are only responsible for providing rotating light plane signals carrying angle information. Receivers automatically measure scanning time of laser planes and upload data to the workstation to calculate horizontal angle and vertical angle. Simultaneous measurement of multiple receivers can be realized since there is no human intervention in measurement process .Spatial angle measurement result indicates that the repeatable accuracy of new method is better than 10＂. Proposed method can improve measurement＇s automation degree and speed while ensuring measurement accuracy.
基金supported by the Program of Tianjin Science and Technology Plan (No.08ZHTGCG01100)
文摘The design of vision measurement system of double optical paths with single CCD based on the digital signal processor(DSP) is presented.Using TMS320F2812 as the intelligent control unit,the CCD driving circuit,level conversion circuit and CCD output signal data acquisition and processing circuit are designed.By means of plane reflectors,the optical structure of the system is optimized,which reduces errors owing to tilt effect of the measured unit,improves measuring accuracy and makes the system more compact.Double optical paths signal data acquisition with single CCD is demonstrated.In addition,the improved resolution is enhanced up to sub-pixel level by the average polynomial interpolation algorithm.
基金funded by the National Natural Science Foundation of China(51705024,51535002,51675053,61903041,61903042,and 61903041)the National Key Research and Development Program of China(2016YFF0101801)+4 种基金the National Hightech Research and Development Program of China(2015AA042308)the Innovative Equipment Pre-Research Key Fund Project(6140414030101)the Manned Space Pre-Research Project(20184112043)the Beijing Municipal Natural Science Foundation(F7202017 and 4204101)the Beijing Nova Program of Science and Technology(Z191100001119052)。
文摘Structural deformation monitoring of flight vehicles based on optical fiber sensing(OFS)technology has been a focus of research in the field of aerospace.After nearly 30 years of research and development,Chinese and international researchers have made significant advances in the areas of theory and methods,technology and systems,and ground experiments and flight tests.These advances have led to the development of OFS technology from the laboratory research stage to the engineering application stage.However,a few problems encountered in practical applications limit the wider application and further development of this technology,and thus urgently require solutions.This paper reviews the history of research on the deformation monitoring of flight vehicles.It examines various aspects of OFS-based deformation monitoring including the main varieties of OFS technology,technical advantages and disadvantages,suitability in aerospace applications,deformation reconstruction algorithms,and typical applications.This paper points out the key unresolved problems and the main evolution paradigms of engineering applications.It further discusses future development directions from the perspectives of an evolution paradigm,standardization,new materials,intelligentization,and collaboration.
基金Supported by Tsinghua University’s Scientific Research Initiative Program,China(Grant No.2010THZ05)
文摘Low-fi＇equency vertical vibration isolation systems play important roles in precision measurements to reduce seismic and environmental vibration noise. Several types of active vibration isolation systems have been developed. However, few researches focus on how to optimize the test mass install position in order to improve the vibration transmissibility. An active low-frequency vertical vibration isolation system based on an earlier instrument, the Super Spring, is designed and implemented. The system, which is simple and compact, consists of two stages： a parallelogram-shaped linkage to ensure vertical motion, and a simple spring-mass system. The theoretical analysis of the vibration isolation system is presented, including terms erroneously ignored before. By carefully choosing the mechanical parameters according to the above analysis and using feedback control, the resonance frequency of the system is reduced from 2.3 to 0.03 Hz, a reduction by a factor of more than 75. The vibration isolation system is installed as an inertial reference in an absolute gravimeter, where it improved the scatter of the absolute gravity values by a factor of 5. The experimental results verifies the improved performance of the isolation system, making it particularly suitable for precision experiments. The improved vertical vibration isolation system can be used as a prototype for designing high-performance active vertical isolation systems. An improved theoretical model of this active vibration isolation system with beam-pivot configuration is proposed, providing fundamental guidelines for vibration isolator design and assembling.
基金Supported by the National Natural Science Foundation of China under Grant No 50575110.
文摘The orthogonally linearly polarized dual frequency Nd： YA G lasers with two quarter wave plates in laser resonator are proposed. The intra-cavity variable birefringence, which is caused by relative rotation of these two wave plates in laser inner cavity, results in the frequency difference of the dual frequency laser also changeable. The theory model based on the Jones matrix is presented, as well as experimental results. The potential application of this phenomenon in precision roll-angle measurement is also discussed.
基金supported by the Program for Changjiang Scholars and Innovative Research Team in University(No.IRT_16R07)the Project Plan of Beijing Municipal Education Commission for Enhancing the Innovation Capability in 2015(No.TJSHG201510772016)the Open Project of Beijing Engineering Research Center of Optoelectronic Information and Instruments(No.GD2016008)
文摘An optical fiber sensor for strain and temperature measurement based on long period fiber grating(LPFG) cascaded with fiber Bragg grating(FBG) structure has been proposed and realized both theoretically and experimentally. Theoretical analysis shows that two microstructures with similar sensitivities cannot be used for double parameters measurement. The LPFG is micromachined by the CO_2 laser, and the FBG is micromachined by the excimer laser. For the validation and comparison, two FBGs and one LPFG are cascaded with three transmission valleys, namely FBG1 valley at 1 536.3 nm, LPFG valley at 1 551.2 nm, and FBG2 valley at 1 577.3 nm. The temperature and strain characteristics of the proposed sensor are measured at 45—70 °C and 250—500 με, respectively. The sensitivity matrix is determined by analyzing wavelength shifts and parameter response characterization of three different dips. The proposed optical fiber sensor based on LPFG cascaded with FBG structure can be efficiently used for double parameters measurement with promising application prospect and great research reference value.
基金National Natural Science Foundation of China(No.51775377)National Key Research and Development Plan(No.2017YFF0204800)+2 种基金Natural Science Foundation of TianJin City(No.17JCQNJC01100)Young Elite Scientists Sponsorship Program by Cast of China(No.2016QNRC001)Open Project of Key Laboratory of Underwater Information and Control(No.6142218081811)
文摘With the development of power plants towards high power and intelligent operation direction,the vibrations or failures of blades,especially the last stage blades in steam turbines,happen more frequently due to the unstable operating conditions brought by flexible operation.A vibration measuring method for the shrouded blades of a steam turbine based on eddy current sensors with high frequency response is proposed,meeting the requirements of non-contact heath monitoring.The eddy current sensors produce the signals which are related to the area changing of every blade’s shroud resulting from the rotation of stator.Then an improved blade tip timing(BTT)technique is proposed to detect the vibrations of shrouded blades by measuring the arrival time of each area changing signal.A structure of eddy current sensors is developed in steam turbines and an amplitude modulation/demodulation circuit is designed to improve the response bandwidth up to 250 kHz.Vibration tests for the last stage blades of a steam turbine were carried out and the results validate the efficiency of the improved BTT technique and the high frequency response of the eddy current sensors presented.
基金supported by the National Natural Science Foundation of China(Grant No.61036016)
文摘We present a novel precise angle measurement scheme based on parallel multiplex laser feedback interferometry （PLFI）, which outputs two parallel laser beams and thus their displacement difference reflects the angle variation of the target. Due to its ultrahigh sensitivity to the feedback light, PLFI realizes the direct non-contact measurement of non- cooperative targets. Experimental results show that PLFI has an accuracy of 8＂ within a range of 1400＂. The yaw of a guide is also measured and the experimental results agree with those of the dual-frequency laser interferometer Agilent 5529A.
基金Project supported by the National Natural Science Foundation of China(Grant No.11873044)the National Key Research and Development Project of China(Grant No.2016YFF0200202)Consulting Research Project of Chinese Academy of Engineering(Grant No.2018-ZCQ-03)。
文摘Cold atom clocks have made remarkable progresses in the last two decades and played critical roles in precision measurements. Primary Cs fountain frequency standards have achieved a total uncertainty of a few parts in 1016, and the best optical clock has reached a type B uncertainty below 10-18. Besides applications in the metrology, navigation, etc.,ultra-stable and ultra-accurate atomic clocks have also become powerful tools in the basic scientific investigations. In this paper, we focus on the recent developments in the high-performance cold atomic clocks which can be used as frequency standards to calibrate atomic time scales. The basic principles, performances, and limitations of fountain clocks and optical clocks based on signal trapped ion or neutral atoms are summarized. Their applications in metrology and other areas are briefly introduced.
基金Supported by the National Natural Science Foundation of China under Grant No 60438010.
文摘A simple and precise retardation measurement based on laser feedback is demonstrated. The measurement principle is based on polarization flipping induced by optical feedback from an external birefringence cavity. The measured wave plate is located in the external cavity. When the length of the external cavity is tuned, the polarization states of laser will flip between two eigenstates, and the position of polarization flipping in one period of intensity modulation will vary with retardation of the wave plate. The duty ratio of two eigenstates is used to determine the retardation. Main advantages of the technique are that it is compact, low cost, fast and flexible. Especially, it is insensitive to a fluctuation of laser intensity and is suitable for on-line measurement. The experimental results have shown that the measurement uncertainty is better than 0.03° in the range 30°-150°.
基金the financial support from Science Foundation Ireland (SFI) (No. 15/RP/B3208)‘111’ project by the State Administration of Foreign Experts Affairs and the Ministry of Education of China (No. B07014)。
文摘It has been nearly 50 years since the first glimpse of the relationship between myopia and peripheral refractive errors. According to experiments on both animals and humans, the eyes with hyperopic peripheral vision appear to be at higher risk of developing myopia than those with myopic peripheral refractive errors. Despite the first measurement of peripheral refraction being achieved by a modified manual optometer, the concept of emmetropization triggered a rapidly increasing number of studies on peripheral aberrations. Not only the horizontal off-axis aberrations but also the meridional aberrations at different angles are measured by researchers during the development of peripheral aberrations measuring techniques. According to the differences among the working principles, a variety of techniques have been adopted for performing such measurements. The methods developed to realize the high-performance measurement involve the subject cooperating actively by rotating the head or eyes, the rotation of the whole optical path, and the combination of measurements of many light paths. This paper provides a review of the peripheral aberrations measuring techniques and their current status. This article also highlights the development trend of the measuring techniques of peripheral aberrations and practical applications of peripheral aberration measurements, such as the control of the accommodation, the measuring time, and the dynamic range problem of the wavefront sensor. Although wavefront sensing peripheral measurement is widely recognized for its capability to reveal both lower-order aberrations and higher-order aberrations, the efficiency of an autorefractometer is incomparable. The current study reveals that the most widely used peripheral aberration measurement methods are the use of an open field autorefractometer and Hartman-shack wavefront sensor-based techniques.
文摘A laser collimating system based on 2-D position sensitive detector (PSD) is presented in this paper. The working principle of PSD is depicted in detail. A calibration device was developed to check the nonlinearity errors of PSD and a multilayer feedforward neural network based on error back-propagation algorithm was used to compensate errors. With the aid of computer-based data acquisition system, an automatic dynamic measuring process was realized. A series of experiments, including comparison tests with laser interferometer, were done to evaluate the performance of the measuring system. The experimental results show that the spatial straightness errors of guide rails can be measured with high accuracy. The maximum differences between the device and laser interferometer are 0.027 mm in Y direction, and 0.053 mm in X direction in the measuring distance of 6 m.
基金supported in part by National Natural Science Foundation of China (Grant No 50775127/E0525)National Basic Research Specialized Program of China (Grant No 2007CB306504)
文摘This paper has developed and characterized a method to produce a velocity-tunable ^87Rb cold atomic source for atomic interferometry application. Using a high speed fluorescence imaging technology, it reports that the dynamic process of the atomic source formation is observed and the source performances including the flux and the initial velocity are characterized. A tunable atomic source with the initial velocity of 1.4-2.6 m/s and the atomic source flux of 2× 10^8 - 6 × 10^9 atoms/s has been obtained with the built experimental setup.
基金supported by the National 863 Program(No.2008AA042207)
文摘Based on the evaluation of advantages and disadvantages of high-precision digital time interval measuring algorithms, and combined with the principle of the typical time-difference ultrasonic flow measurement, the requirements for the measurement of echo time of flight put forward by the ultrasonic flow measurement are analyzed. A new high-precision time interval measurement algorithm is presented, which combines the pulse counting method with the phase delay interpolation. The pulse counting method is used to ensure a large dynamic measuring range, and a double-edge triggering counter is designed to improve the accuracy and reduce the counting quantization error. The phase delay interpolation is used to reduce the quantization error of pulse counting for further improving the time measurement resolution. Test data show that the systexn for the measurement of the ultrasonic echo time of flight based on this algorithm and implemented on an Field Programmable Gate Army（FleA） needs a relatively short time for measurement, and has a measurement error of less than 105 ps.
