Constructing a cross-border power energy system with multiagent power energy as an alliance is important for studying cross-border power-trading markets.This study considers multiple neighboring countries in the form ...Constructing a cross-border power energy system with multiagent power energy as an alliance is important for studying cross-border power-trading markets.This study considers multiple neighboring countries in the form of alliances,introduces neighboring countries’exchange rates into the cross-border multi-agent power-trading market and proposes a method to study each agent’s dynamic decision-making behavior based on evolutionary game theory.To this end,this study uses three national agents as examples,constructs a tripartite evolutionary game model,and analyzes the evolution process of the decision-making behavior of each agent member state under the initial willingness value,cost of payment,and additional revenue of the alliance.This research helps realize cross-border energy operations so that the transaction agent can achieve greater trade profits and provides a theoretical basis for cooperation and stability between multiple agents.展开更多
Advanced carbon emission factors of a power grid can provide users with effective carbon reduction advice,which is of immense importance in mobilizing the entire society to reduce carbon emissions.The method of calcul...Advanced carbon emission factors of a power grid can provide users with effective carbon reduction advice,which is of immense importance in mobilizing the entire society to reduce carbon emissions.The method of calculating node carbon emission factors based on the carbon emissions flow theory requires real-time parameters of a power grid.Therefore,it cannot provide carbon factor information beforehand.To address this issue,a prediction model based on the graph attention network is proposed.The model uses a graph structure that is suitable for the topology of the power grid and designs a supervised network using the loads of the grid nodes and the corresponding carbon factor data.The network extracts features and transmits information more suitable for the power system and can flexibly adjust the equivalent topology,thereby increasing the diversity of the structure.Its input and output data are simple,without the power grid parameters.We demonstrated its effect by testing IEEE-39 bus and IEEE-118 bus systems with average error rates of 2.46%and 2.51%.展开更多
The evolution of the eutectic structures in the alloys with different copper contents during heat treatment was studied by scanning electron microscopy(SEM), energy dispersive X-ray spectroscopy(EDS), and differential...The evolution of the eutectic structures in the alloys with different copper contents during heat treatment was studied by scanning electron microscopy(SEM), energy dispersive X-ray spectroscopy(EDS), and differential scanning calorimetry(DSC). The as cast microstructures involve α(Al), eutectic(α(Al) + Mg(Al, Cu, Zn)2) and Al7Cu2Fe. The Al2CuMg particles form during heat treatment. The volume of coarse phases decreases quickly in the initial 12 h during heat treatment. The volume of coarse phases change a little at 400 and 420 ℃. Copper content has a great influence on the evolution of the eutectic. The coarse phases dissolve slowly in alloy with higher copper content.展开更多
The formation and growth of thermal fatigue crack in chromium wear resistant cast iron was investigated, and the effect of hot deformation on the crack was analyzed by means of optical microscope and scanning electron...The formation and growth of thermal fatigue crack in chromium wear resistant cast iron was investigated, and the effect of hot deformation on the crack was analyzed by means of optical microscope and scanning electron microscope and high frequency induction thermal fatigue tester. The results show that eutectic carbide is the main location and passage for initiation and extension of thermal fatigue cracks, hot deformation can improve the eutectic carbiders morphology and distribution, inhibit the generation and propagation of thermal fatigue cracks. In the experiment, the propagation rate of thermal fatigue crack reduces with the quantity of hot deformation increasing, which was analyzed in the point view of the activation energy of crack propagation.展开更多
The low-energy, multi-impact fracture resistance and the abrasiveness of the cross-rolled low alloy white cast iron grinding balls were studied after heat treatments at residual rolling temperature. Moreover, the mean...The low-energy, multi-impact fracture resistance and the abrasiveness of the cross-rolled low alloy white cast iron grinding balls were studied after heat treatments at residual rolling temperature. Moreover, the means by which they are damaged and characters of the wear surface were analyzed. The results show that high resistance to impact fracture and high abrasiveness can be achieved after appropriate heat treatment at residual rolling temperature. This kind of heat treatment technology has several advantages under low impact and hard abrasive. These results are very useful for determining the optimized heat treatment technology at residual rolling temperatures.展开更多
The morphology of carbides, as well as the generation and propagation of fatigue cracks in a wear resistant white cast iron after impact fatigue test were observed by means of optical microscope and SEM, and the relat...The morphology of carbides, as well as the generation and propagation of fatigue cracks in a wear resistant white cast iron after impact fatigue test were observed by means of optical microscope and SEM, and the relationship among the content of RE (rare earths) in the wear resistant white cast iron and the heating temperature as well as the length and propagation speed of the fatigue cracks were determined. Based on the obtained results, the effect of RE modification and heat treatment on the impact fatigue property was further studied. Experimental results show that addition of RE can defer the time required for the generation of fatigue cracks, reduce their propagation speed and increase the impact fatigue resistance. The aforesaid effect is more noticeable in case of combined RE modification with heat treatment, which can be attributed to the variation in morphology and the distribution of the eutectic carbide network.展开更多
The corrosion behavior of a CuCrNiAl alloy with NaCl deposit at 700 and 900℃ was studied by means of metalloscope, XRD, SEM/EDX, and thermogravimetric analysis. The results indicated that the corrosion of the CuCrNiA...The corrosion behavior of a CuCrNiAl alloy with NaCl deposit at 700 and 900℃ was studied by means of metalloscope, XRD, SEM/EDX, and thermogravimetric analysis. The results indicated that the corrosion of the CuCrNiAl alloy beneath the NaCl deposit is severe; the corrosion production is loose and easy to scale off; the Cr phase is easier to erode than the Cu phase, and the contents of Cu and Cr decrease when the content of Ni increases in the matrix of the alloy beneath the corrosion region. The effects of distortion on the corrosion of the CuCrNiAl alloy were discussed, and the acceleration mechanisms of NaCl on the corrosion were also discussed.展开更多
After different heat treatment processes, the metal compound, the microstructure and the hardness of the C-Cr-W- Mo-V-RE Fe-based hardfacing layers are investigated by means of metallographic microscope, X-ray diffrac...After different heat treatment processes, the metal compound, the microstructure and the hardness of the C-Cr-W- Mo-V-RE Fe-based hardfacing layers are investigated by means of metallographic microscope, X-ray diffraction （ XRD ）, energy dispersive spectrum（ EDS ）, transmission electron microscope（TEM） and hardness tester. The results show that the hardfacing layers have higher tempering stability and secondary hardening property. After quenching at 820 ℃ ,the hardness value（ HRC37 ） and the microstructure of the layers are similar to that normalized at 820 - 1 000 ℃. The tempering stability and the hardness increases with increasing quench temperature, which is attributed to the amount of the alloy element in the matrix. These results are very helpful for improving the mechanical properties of the hardfacing layers.展开更多
Supercooling of the microencapsulated phase change materials（PCMs） during cooling usually happens. This phenomenon can interfere with heat transfer and is necessary to further overcome. In this study, mela- mine-for...Supercooling of the microencapsulated phase change materials（PCMs） during cooling usually happens. This phenomenon can interfere with heat transfer and is necessary to further overcome. In this study, mela- mine-formaldehyde microcapsules containing two n-alkane PCMs, namely, n-dodecane（Cl2） or n-tetradecane（C14） were prepared by in situ polymerization. A small amount of n-hexatriacontane（C36） was introduced as an organic ge- lator into the core of microcapsules to cope with the supercooling problem. Analyses demonstrate that supercooling of the microencapsulated C12 or C14 was significantly suppressed by adding 3%（mass fraction） C36, without changing the spherical morphology and dispersibility. It could be also found that the enthalpy of microencapsulated CI2 or C14 containing C36 was similar to that of microencapsulated n-alkanes without C36, whereas the difference between onsets of crystallization and melting（degree of supercooling） is similar to that of those of pure n-alkanes, suggesting the re- markable suppression ability of the organic gelator on supercooling.展开更多
In order to study the relationship between biological and pharmacological activities with their structures, a series of tri- and tetra-oxygenated xanthones including 1-hydroxyl-2,3,4,7- tetramethoxy xanthone 1, 1-hydr...In order to study the relationship between biological and pharmacological activities with their structures, a series of tri- and tetra-oxygenated xanthones including 1-hydroxyl-2,3,4,7- tetramethoxy xanthone 1, 1-hydroxyl-2,3,4,5-tetramethoxyl xanthone 2, 1-hydroxyl-3,5-dimethoxy- xanthone 3, 1,8-dihydroxyl-3,5-dimethoxyl xanthone 4 and 1,5,8-trihydroxyl-3-methoxy xanthone 5 have been isolated from Swertia chirayita. Their structures were established on the basis of spectral and chemical evidences. The crystal structure of 5 was also investigated by single-crystal X-ray diffraction analysis. It crystallizes in the triclinic system, space group P?with a = 7.1540(10), b = 7.520(2), c = 10.671(2) , V = 562.7(2) 3 , α = 86.50(3), β = 80.06(3) , γ = 85.00(3), Z = 2, Dc = 1.618 g/m3, R = 0.0405, wR = 0.1028 and F(000) = 284. The molecular structure of 5 is nearly planar and four substituents are much closer to the plane. Compound 5 contains three intermolecular hydro- gen bonds. A recent study shows that phenolic hydroxyls in xanthones are the main active groups capable of scavenging OH and O2.展开更多
We propose a restoration strategy using microgrids for restoring power supply to critical loads after an extreme event and thereby enhancing the resilience of the distribution power grid.The limited capacities of dist...We propose a restoration strategy using microgrids for restoring power supply to critical loads after an extreme event and thereby enhancing the resilience of the distribution power grid.The limited capacities of distributed generators(DGs)within the microgrids and those of intermittent energy sources such as wind and photovoltaic power are considered.An enhanced strategy model of the distribution network is established for maximizing the power supply to critical loads.Firstly,the importance of the load is quantified by using the analytic hierarchy process(AHP)and the model of the microgrid output is further improved.In the demand response mechanism,an interruptible load is used to suppress the fluctuation in the distributed power output.Secondly,piecewise linearization method is applied to address the power flow constraints.Then,the resilience enhancement model of the distribution network is transformed into a mixed integer quadratic programming problem.The CPLEX solver is adopted to solve the above problem on the MATLAB platform.Finally,the proposed method is verified by applying it to practical scenarios.展开更多
The current article reports a preparation method of nano-petal nickel hydroxide, which was synthesized using urea as a precipitator by hydrothermal method. Nickel hydroxide samples with different microstructural chara...The current article reports a preparation method of nano-petal nickel hydroxide, which was synthesized using urea as a precipitator by hydrothermal method. Nickel hydroxide samples with different microstructural characteristics were prepared by changing molar ratio of nickel/urea and reaction time. The prepared nickel hydroxide samples were characterized using X-ray diffraction(XRD) and scanning electron micrography(SEM).Electrochemical performances of the samples were then determined under charging–discharging rate of 0.2C. The influences of different conditions of the hydrothermal synthesis method on microstructure parameters of nickel hydroxide were analyzed, while relationships between microstructural characteristics parameters of nickel hydroxide and the electrochemical performances of nickel electrode were also explored.展开更多
The electrocatalytic synthesis of propylene carbonate（PC） from CO2 and propylene oxide（PO） was studied under mild conditions（PCO2=1.01×105 Pa, t=25 ℃）. Influences of solvents, supporting electrolytes, the ...The electrocatalytic synthesis of propylene carbonate（PC） from CO2 and propylene oxide（PO） was studied under mild conditions（PCO2=1.01×105 Pa, t=25 ℃）. Influences of solvents, supporting electrolytes, the passed charge, the nature of electrodes and the current density（j） on the yield of PC were investigated to optimize the electrolytic conditions, with the maximal yield to be 46.2%, the selectivity of propylene carbonate is 100%. The reduction of propylene oxide in the absence and presence of CO2 was examined by cyclic voltammetry. The mechanism of the reaction initiated by the synergistic effect of halides ions of supporting electrolytes with nucleophilicity and the metal ions from scarification anode with Lewis acid acidity was proposed on the basis of our results.展开更多
Based on the diffusion approximate theory （DA）, a theoretical model about the distribution of the intensity of a narrow collimation beam illuminating on a semi-lnfinite biological tissue is developed. In order to ve...Based on the diffusion approximate theory （DA）, a theoretical model about the distribution of the intensity of a narrow collimation beam illuminating on a semi-lnfinite biological tissue is developed. In order to verify the correctness of the model, a novel method of measuring the distributions of the intensity of light in Intralipid-10% suspension at 650 nm is presented and ts of the distributions of the distance-dependent intensity of scattering light in different directions are made. The investigations show that the results from our diffusion model are in good agreement with the experimental results beyond and in the areas around the light source, and the distance-dependent intensity in the incident direction attenuates approximately in the exponential form. Furthermore, our theoretic results indicate the anisotropic characteristics of the intensity in different directions of scattering light inside the biological tissue.展开更多
A squall line swept eastward across the area of the Yangtze River Delta and produced gusty winds and heavy rain from the afternoon to the evening of 24 August 2002. In this papers the roles of moisture in the genesis ...A squall line swept eastward across the area of the Yangtze River Delta and produced gusty winds and heavy rain from the afternoon to the evening of 24 August 2002. In this papers the roles of moisture in the genesis and development of the squall line were studied. Based on the precipitable water vapor （PWV） data from a ground-based GPS network over the Yangtze River Delta in China, plus data from a Pennsylvania State University/National Atmospheric Center （PSU/NCAR） mesoscale model （MM5） simulation, initialized by three-dimensional variational （3D-VAR） assimilation of the PWV data, some interesting features are revealed. During the 12 hours prior to the squall line arriving in the Shanghai area, a significant increase in PWV indicates a favorable moist environment for a squall line to develop. The vertical profile of the moisture illustrates that it mainly increased in the middle levels of the troposphere, and not at the surface. Temporal variation in PWV is a better precursor for squall line development than other surface meteorological parameters. The characteristics of the horizontal distribution of PWV not only indicated a favorable moist environment, but also evolved a cyclonic wind field for a squall line genesis and development. The ＂＋2 mm＂ contours of the three-hourly PWV variation can be used successfully to predict the location of the squall line two hours later.展开更多
Common insulation gas cannot normally work in refrigeration temperature range(153-243 K), especially in extremely cold regions. To solve this problem, this essay uses cubic equation combined with two-parameter model i...Common insulation gas cannot normally work in refrigeration temperature range(153-243 K), especially in extremely cold regions. To solve this problem, this essay uses cubic equation combined with two-parameter model in theorem of corresponding states to estimate dew-point of hybrid gas. The influence of temperature on mixing ratio is studied by using van der Waals equation. The result shows that the mixing ratio is stable during temperature-fall period. Insulation property of CF_4 and CF_4/N_2 in refrigeration temperature range is studied through self-designed low-temperature test system. The result shows when the density of hybrid gas is invariable, temperature changing has less influence on breakdown voltage, and when the mixing ratio is 20%, CF_4/N_2 is the greatest potential hybrid gas.展开更多
The influence of coarse Cu-bearing particles, matrix and subgrain boundary precipitates on the stress corrosion susceptibility of the Al-Zn-Mg-Cu alloys was investigated. The strength of 7150 alloy is about 15 MPa hig...The influence of coarse Cu-bearing particles, matrix and subgrain boundary precipitates on the stress corrosion susceptibility of the Al-Zn-Mg-Cu alloys was investigated. The strength of 7150 alloy is about 15 MPa higher than that of 7010 alloy. The 7010 alloy exhibits higher resistance to stress corrosion cracking as compared with the 7150 alloy. The coarse Cu-bearing particles are detrimental to the resistance to stress corrosion cracking. The increase of size of matrix and subgrain boundary precipitates decreases the susceptibility of stress corrosion. The anodic dissolution and hydrogen embrittlement govern the cracking process. The severity of stress corrosion cracking is shown to be related to the coarse Cu-bearing particles, matrix and subgrain precipitates in Al-Zn-Mg-Cu alloys.展开更多
Fluorescence material of Sm doped Si-Ca-Mg system was synthesized by using the method of solid phase reaction at high temperature. The phase composition and crystal structure of this material were analyzed with XRD me...Fluorescence material of Sm doped Si-Ca-Mg system was synthesized by using the method of solid phase reaction at high temperature. The phase composition and crystal structure of this material were analyzed with XRD method for its composition and the existence form of Sm atom. We aimed to exactly determine the phase composition of this fluorescence material and the doping position and environment of rare-earth Sm atom in the system because these factors have significant effects on the properties. The analytical results show that the Sm atoms dope in Ca2O26Si6Sm8 lattice in the form of atomic site-occupation in three different space positions with different occupancy rates. Therefore, based on the XRD analytical results, the fluorescence material of Sm doped Si-Ca-Mg system with high performance can be synthesized.展开更多
基金National Key R&D Program of China(Grant No.2022YFB2703500)National Natural Science Foundation of China(Grant No.52277104)+2 种基金National Key R&D Program of Yunnan Province(202303AC100003)Applied Basic Research Foundation of Yunnan Province (202301AT070455, 202101AT070080)Revitalizing Talent Support Program of Yunnan Province (KKRD202204024).
文摘Constructing a cross-border power energy system with multiagent power energy as an alliance is important for studying cross-border power-trading markets.This study considers multiple neighboring countries in the form of alliances,introduces neighboring countries’exchange rates into the cross-border multi-agent power-trading market and proposes a method to study each agent’s dynamic decision-making behavior based on evolutionary game theory.To this end,this study uses three national agents as examples,constructs a tripartite evolutionary game model,and analyzes the evolution process of the decision-making behavior of each agent member state under the initial willingness value,cost of payment,and additional revenue of the alliance.This research helps realize cross-border energy operations so that the transaction agent can achieve greater trade profits and provides a theoretical basis for cooperation and stability between multiple agents.
基金This work is supposed by the Science and Technology Projects of China Southern Power Grid(YNKJXM20222402).
文摘Advanced carbon emission factors of a power grid can provide users with effective carbon reduction advice,which is of immense importance in mobilizing the entire society to reduce carbon emissions.The method of calculating node carbon emission factors based on the carbon emissions flow theory requires real-time parameters of a power grid.Therefore,it cannot provide carbon factor information beforehand.To address this issue,a prediction model based on the graph attention network is proposed.The model uses a graph structure that is suitable for the topology of the power grid and designs a supervised network using the loads of the grid nodes and the corresponding carbon factor data.The network extracts features and transmits information more suitable for the power system and can flexibly adjust the equivalent topology,thereby increasing the diversity of the structure.Its input and output data are simple,without the power grid parameters.We demonstrated its effect by testing IEEE-39 bus and IEEE-118 bus systems with average error rates of 2.46%and 2.51%.
基金Project(2004AA5BG018) supported by the Science and Technology Development Fund of Harbin, China
文摘The evolution of the eutectic structures in the alloys with different copper contents during heat treatment was studied by scanning electron microscopy(SEM), energy dispersive X-ray spectroscopy(EDS), and differential scanning calorimetry(DSC). The as cast microstructures involve α(Al), eutectic(α(Al) + Mg(Al, Cu, Zn)2) and Al7Cu2Fe. The Al2CuMg particles form during heat treatment. The volume of coarse phases decreases quickly in the initial 12 h during heat treatment. The volume of coarse phases change a little at 400 and 420 ℃. Copper content has a great influence on the evolution of the eutectic. The coarse phases dissolve slowly in alloy with higher copper content.
基金ItemSponsored by Guiding Programof Science and Technology Research of Jilin Province of China (20000513)
文摘The formation and growth of thermal fatigue crack in chromium wear resistant cast iron was investigated, and the effect of hot deformation on the crack was analyzed by means of optical microscope and scanning electron microscope and high frequency induction thermal fatigue tester. The results show that eutectic carbide is the main location and passage for initiation and extension of thermal fatigue cracks, hot deformation can improve the eutectic carbiders morphology and distribution, inhibit the generation and propagation of thermal fatigue cracks. In the experiment, the propagation rate of thermal fatigue crack reduces with the quantity of hot deformation increasing, which was analyzed in the point view of the activation energy of crack propagation.
基金Item Sponsored by Guiding Program of Science and Technology Research of Jilin Province of China (20000513)
文摘The low-energy, multi-impact fracture resistance and the abrasiveness of the cross-rolled low alloy white cast iron grinding balls were studied after heat treatments at residual rolling temperature. Moreover, the means by which they are damaged and characters of the wear surface were analyzed. The results show that high resistance to impact fracture and high abrasiveness can be achieved after appropriate heat treatment at residual rolling temperature. This kind of heat treatment technology has several advantages under low impact and hard abrasive. These results are very useful for determining the optimized heat treatment technology at residual rolling temperatures.
文摘The morphology of carbides, as well as the generation and propagation of fatigue cracks in a wear resistant white cast iron after impact fatigue test were observed by means of optical microscope and SEM, and the relationship among the content of RE (rare earths) in the wear resistant white cast iron and the heating temperature as well as the length and propagation speed of the fatigue cracks were determined. Based on the obtained results, the effect of RE modification and heat treatment on the impact fatigue property was further studied. Experimental results show that addition of RE can defer the time required for the generation of fatigue cracks, reduce their propagation speed and increase the impact fatigue resistance. The aforesaid effect is more noticeable in case of combined RE modification with heat treatment, which can be attributed to the variation in morphology and the distribution of the eutectic carbide network.
文摘The corrosion behavior of a CuCrNiAl alloy with NaCl deposit at 700 and 900℃ was studied by means of metalloscope, XRD, SEM/EDX, and thermogravimetric analysis. The results indicated that the corrosion of the CuCrNiAl alloy beneath the NaCl deposit is severe; the corrosion production is loose and easy to scale off; the Cr phase is easier to erode than the Cu phase, and the contents of Cu and Cr decrease when the content of Ni increases in the matrix of the alloy beneath the corrosion region. The effects of distortion on the corrosion of the CuCrNiAl alloy were discussed, and the acceleration mechanisms of NaCl on the corrosion were also discussed.
文摘After different heat treatment processes, the metal compound, the microstructure and the hardness of the C-Cr-W- Mo-V-RE Fe-based hardfacing layers are investigated by means of metallographic microscope, X-ray diffraction （ XRD ）, energy dispersive spectrum（ EDS ）, transmission electron microscope（TEM） and hardness tester. The results show that the hardfacing layers have higher tempering stability and secondary hardening property. After quenching at 820 ℃ ,the hardness value（ HRC37 ） and the microstructure of the layers are similar to that normalized at 820 - 1 000 ℃. The tempering stability and the hardness increases with increasing quench temperature, which is attributed to the amount of the alloy element in the matrix. These results are very helpful for improving the mechanical properties of the hardfacing layers.
文摘Supercooling of the microencapsulated phase change materials（PCMs） during cooling usually happens. This phenomenon can interfere with heat transfer and is necessary to further overcome. In this study, mela- mine-formaldehyde microcapsules containing two n-alkane PCMs, namely, n-dodecane（Cl2） or n-tetradecane（C14） were prepared by in situ polymerization. A small amount of n-hexatriacontane（C36） was introduced as an organic ge- lator into the core of microcapsules to cope with the supercooling problem. Analyses demonstrate that supercooling of the microencapsulated C12 or C14 was significantly suppressed by adding 3%（mass fraction） C36, without changing the spherical morphology and dispersibility. It could be also found that the enthalpy of microencapsulated CI2 or C14 containing C36 was similar to that of microencapsulated n-alkanes without C36, whereas the difference between onsets of crystallization and melting（degree of supercooling） is similar to that of those of pure n-alkanes, suggesting the re- markable suppression ability of the organic gelator on supercooling.
基金The project was supported by the Key Laboratory for Natural Medicine of Gansu Province and Foundation of Lanzhou University of Technology
文摘In order to study the relationship between biological and pharmacological activities with their structures, a series of tri- and tetra-oxygenated xanthones including 1-hydroxyl-2,3,4,7- tetramethoxy xanthone 1, 1-hydroxyl-2,3,4,5-tetramethoxyl xanthone 2, 1-hydroxyl-3,5-dimethoxy- xanthone 3, 1,8-dihydroxyl-3,5-dimethoxyl xanthone 4 and 1,5,8-trihydroxyl-3-methoxy xanthone 5 have been isolated from Swertia chirayita. Their structures were established on the basis of spectral and chemical evidences. The crystal structure of 5 was also investigated by single-crystal X-ray diffraction analysis. It crystallizes in the triclinic system, space group P?with a = 7.1540(10), b = 7.520(2), c = 10.671(2) , V = 562.7(2) 3 , α = 86.50(3), β = 80.06(3) , γ = 85.00(3), Z = 2, Dc = 1.618 g/m3, R = 0.0405, wR = 0.1028 and F(000) = 284. The molecular structure of 5 is nearly planar and four substituents are much closer to the plane. Compound 5 contains three intermolecular hydro- gen bonds. A recent study shows that phenolic hydroxyls in xanthones are the main active groups capable of scavenging OH and O2.
基金supported by the State Grid Science&Technology Project(Grant No.17H300000437)
文摘We propose a restoration strategy using microgrids for restoring power supply to critical loads after an extreme event and thereby enhancing the resilience of the distribution power grid.The limited capacities of distributed generators(DGs)within the microgrids and those of intermittent energy sources such as wind and photovoltaic power are considered.An enhanced strategy model of the distribution network is established for maximizing the power supply to critical loads.Firstly,the importance of the load is quantified by using the analytic hierarchy process(AHP)and the model of the microgrid output is further improved.In the demand response mechanism,an interruptible load is used to suppress the fluctuation in the distributed power output.Secondly,piecewise linearization method is applied to address the power flow constraints.Then,the resilience enhancement model of the distribution network is transformed into a mixed integer quadratic programming problem.The CPLEX solver is adopted to solve the above problem on the MATLAB platform.Finally,the proposed method is verified by applying it to practical scenarios.
基金financially supported by the Natural Science Foundation of Inner Mongolia (No. 2012MS0205)the Scientific Research Project of Higher Education Institutions of Inner Mongolia (No. NGZZ12101)the Scientific Planning Project of Baotou City (2011Z1006)
文摘The current article reports a preparation method of nano-petal nickel hydroxide, which was synthesized using urea as a precipitator by hydrothermal method. Nickel hydroxide samples with different microstructural characteristics were prepared by changing molar ratio of nickel/urea and reaction time. The prepared nickel hydroxide samples were characterized using X-ray diffraction(XRD) and scanning electron micrography(SEM).Electrochemical performances of the samples were then determined under charging–discharging rate of 0.2C. The influences of different conditions of the hydrothermal synthesis method on microstructure parameters of nickel hydroxide were analyzed, while relationships between microstructural characteristics parameters of nickel hydroxide and the electrochemical performances of nickel electrode were also explored.
基金Supported by the National Natural Science Foundation of China(No.20973065)the Fund of Basic Research in Natural Science Issued by Shanghai Municipal Committee of Science+4 种基金 China(No.08dj1400100)the Shanghai Leading Project China (No.B409)the Foundation of Outstanding Young Talent in University of Anhui Province China No.2010SQRL042)
文摘The electrocatalytic synthesis of propylene carbonate（PC） from CO2 and propylene oxide（PO） was studied under mild conditions（PCO2=1.01×105 Pa, t=25 ℃）. Influences of solvents, supporting electrolytes, the passed charge, the nature of electrodes and the current density（j） on the yield of PC were investigated to optimize the electrolytic conditions, with the maximal yield to be 46.2%, the selectivity of propylene carbonate is 100%. The reduction of propylene oxide in the absence and presence of CO2 was examined by cyclic voltammetry. The mechanism of the reaction initiated by the synergistic effect of halides ions of supporting electrolytes with nucleophilicity and the metal ions from scarification anode with Lewis acid acidity was proposed on the basis of our results.
基金Project supported by the National Natural Science Foundation of China （Grant No 60278007）, the Natural Science Foundation of Tianjin （Grant No 033601311） and the Natural Science Foundation of Guangdong Province （Grant No 04011427）.
文摘Based on the diffusion approximate theory （DA）, a theoretical model about the distribution of the intensity of a narrow collimation beam illuminating on a semi-lnfinite biological tissue is developed. In order to verify the correctness of the model, a novel method of measuring the distributions of the intensity of light in Intralipid-10% suspension at 650 nm is presented and ts of the distributions of the distance-dependent intensity of scattering light in different directions are made. The investigations show that the results from our diffusion model are in good agreement with the experimental results beyond and in the areas around the light source, and the distance-dependent intensity in the incident direction attenuates approximately in the exponential form. Furthermore, our theoretic results indicate the anisotropic characteristics of the intensity in different directions of scattering light inside the biological tissue.
文摘A squall line swept eastward across the area of the Yangtze River Delta and produced gusty winds and heavy rain from the afternoon to the evening of 24 August 2002. In this papers the roles of moisture in the genesis and development of the squall line were studied. Based on the precipitable water vapor （PWV） data from a ground-based GPS network over the Yangtze River Delta in China, plus data from a Pennsylvania State University/National Atmospheric Center （PSU/NCAR） mesoscale model （MM5） simulation, initialized by three-dimensional variational （3D-VAR） assimilation of the PWV data, some interesting features are revealed. During the 12 hours prior to the squall line arriving in the Shanghai area, a significant increase in PWV indicates a favorable moist environment for a squall line to develop. The vertical profile of the moisture illustrates that it mainly increased in the middle levels of the troposphere, and not at the surface. Temporal variation in PWV is a better precursor for squall line development than other surface meteorological parameters. The characteristics of the horizontal distribution of PWV not only indicated a favorable moist environment, but also evolved a cyclonic wind field for a squall line genesis and development. The ＂＋2 mm＂ contours of the three-hourly PWV variation can be used successfully to predict the location of the squall line two hours later.
基金Project(51277063)supported by the National Natural Science Foundation of China
文摘Common insulation gas cannot normally work in refrigeration temperature range(153-243 K), especially in extremely cold regions. To solve this problem, this essay uses cubic equation combined with two-parameter model in theorem of corresponding states to estimate dew-point of hybrid gas. The influence of temperature on mixing ratio is studied by using van der Waals equation. The result shows that the mixing ratio is stable during temperature-fall period. Insulation property of CF_4 and CF_4/N_2 in refrigeration temperature range is studied through self-designed low-temperature test system. The result shows when the density of hybrid gas is invariable, temperature changing has less influence on breakdown voltage, and when the mixing ratio is 20%, CF_4/N_2 is the greatest potential hybrid gas.
基金Project(2004AA5BG018) supported by the Science and Technology Development Fund of Harbin, China
文摘The influence of coarse Cu-bearing particles, matrix and subgrain boundary precipitates on the stress corrosion susceptibility of the Al-Zn-Mg-Cu alloys was investigated. The strength of 7150 alloy is about 15 MPa higher than that of 7010 alloy. The 7010 alloy exhibits higher resistance to stress corrosion cracking as compared with the 7150 alloy. The coarse Cu-bearing particles are detrimental to the resistance to stress corrosion cracking. The increase of size of matrix and subgrain boundary precipitates decreases the susceptibility of stress corrosion. The anodic dissolution and hydrogen embrittlement govern the cracking process. The severity of stress corrosion cracking is shown to be related to the coarse Cu-bearing particles, matrix and subgrain precipitates in Al-Zn-Mg-Cu alloys.
基金National Natural Science Foundation of China 20671020
文摘Fluorescence material of Sm doped Si-Ca-Mg system was synthesized by using the method of solid phase reaction at high temperature. The phase composition and crystal structure of this material were analyzed with XRD method for its composition and the existence form of Sm atom. We aimed to exactly determine the phase composition of this fluorescence material and the doping position and environment of rare-earth Sm atom in the system because these factors have significant effects on the properties. The analytical results show that the Sm atoms dope in Ca2O26Si6Sm8 lattice in the form of atomic site-occupation in three different space positions with different occupancy rates. Therefore, based on the XRD analytical results, the fluorescence material of Sm doped Si-Ca-Mg system with high performance can be synthesized.
