Standardization is necessary for the early industrialization of the new materials and technology.It is achieved by having agreed practices for the measurement of properties and other characteristics.The promising use ...Standardization is necessary for the early industrialization of the new materials and technology.It is achieved by having agreed practices for the measurement of properties and other characteristics.The promising use of graphene-based materials in fields like electronics,energy,and composites has resulted in standards for their nomenclature,the measurement of key characteristics,and their specification,etc.Among these,standards for measuring the key characteristics are crucial.The critical parameters are the number of layers,the type and concentration of defects and functional groups,elemental composition,sheet resistance,and carrier mobility.Standards for characterizing these have been analyzed by the International Organization for Standardization Technical Committee in ISO/TC229 and the International Electrotechnical Commission Technical Committee in IEC/TC113.These give details of applicable or preferred samples,the fundamental principles of the techniques,specific precautions,and points for attention in the relevant standards.The pivotal role of the ISO/TC229 and IEC/TC113 standards is considered and challenges and future trends are outlined.展开更多
The thorium-229 nucleus possesses a uniquely low-energy nuclear transition(-8.4 eV,corresponding to a wavelength of-148 nm),which is the first confirmed nuclear excitation that can be coherently manipulated by narrow-...The thorium-229 nucleus possesses a uniquely low-energy nuclear transition(-8.4 eV,corresponding to a wavelength of-148 nm),which is the first confirmed nuclear excitation that can be coherently manipulated by narrow-linewidth lasers.Consequently,this transition has garnered widespread interest over the past decades.Owing to the small nuclear size and strong resistance to environmental perturbations,a thorium-based nuclear clock is theoretically capable of achieving an unprecedented fractional frequency uncertainty at the 10^(−20) level,offering great promise as a next-generation frequency standard.Among the key ingredients of such a thorium-based nuclear clock,a high-performance 148 nm excitation source is of critical importance.Since the feasibility of directly exciting the transition,as well as the overall clock performance,depends heavily on the availability and quality of such a source,the development of high-quality 148 nm laser sources represents a frontier for scientists worldwide.In this article,we provide a systematic overview of the current development of 148 nm laser sources.First,we briefly introduce the scientific motivation for high-precision spectroscopy of the thorium nuclear transition and the corresponding technical requirements for 148 nm laser sources.Then,we summarize four main types of existing 148 nm source generation schemes and their working principles,along with recent progress in nuclear transition measurements using such sources.Finally,we discuss potential future directions.展开更多
Grating fringe projection 3D measurement techniques are extensively applied in various fields.However,in high dynamic range scenarios with significant surface reflectivity variations,uneven greyscale distribution may ...Grating fringe projection 3D measurement techniques are extensively applied in various fields.However,in high dynamic range scenarios with significant surface reflectivity variations,uneven greyscale distribution may lead to phase errors and poor reconstruction results.To address this problem,an adaptive fringe projection method is introduced.The method involves projecting two sets of dark and light fringes onto the object,enabling the full-field projection intensity map to be generated adaptively based on greyscale analysis.First,dark fringes are projected onto the object to extend exposure time as long as possible without causing overexposure in the image.Subsequently,bright fringes are projected under the same exposure settings to detect overexposed pixels,and the greyscale distribution of these overexposed points from the previous dark fringe projection is analyzed to calculate the corresponding projection intensities.Finally,absolute phase information from orthogonal fringes is used for coordinate matching,enabling the generation of adaptive projection fringe patterns.Experiments on various high dynamic range objects show that compared to conventional fringe projection binocular reconstruction method,the proposed algorithm achieves complete reconstruction of high dynamic range surfaces and shows robust performance against phase calculation errors caused by overexposure and low modulation.展开更多
Magnetic tracking technologies have a promising application in detecting the real-time position andattitude of a capsule endoscope.However,most of them need to measure the magnetic moment of a permanentmagnet(PM)embed...Magnetic tracking technologies have a promising application in detecting the real-time position andattitude of a capsule endoscope.However,most of them need to measure the magnetic moment of a permanentmagnet(PM)embedded in the capsule accurately in advance,which can cause inconvenience to practical application.To solve this problem,this paper proposes a magnetic tracking system with the capability of measuring themagnetic moment of the PM automatically.The system is constructed based on a 4×4 magnetic sensor array,whose sensing data is analyzed to determine the magnetic moment by referring to a magnetic dipole model.Withthe determined magnetic moment,a method of fusing the linear calculation and Levenberg-Marquardt algorithmsis proposed to determine the 3D position and 2D attitude of the PM.The experiments verified that the proposedsystem can achieve localization errors of 0.48 mm,0.42 mm,and 0.83 mm and orientation errors of 0.66◦,0.64◦,and 0.87◦for a PM(∅10 mm×10 mm)at vertical heights of 5 cm,10 cm,and 15 cm from the magnetic sensorarray,respectively.展开更多
To obtain the certificate of airworthiness,it is essential to conduct a full-scale aircraft static test.During such test,accurate and comprehensive wing deformation measurement is crucial for assessing its strength,st...To obtain the certificate of airworthiness,it is essential to conduct a full-scale aircraft static test.During such test,accurate and comprehensive wing deformation measurement is crucial for assessing its strength,stiffness,and bearing capability.This paper proposes a novel and cost-effective videogrammetric method using multi-camera system to achieve the non-contact,highprecision,and 3D measurement of overall static deformation for the large-scale wing structure.To overcome the difficulties of making,carrying,and employing the large 2D or 3D target for calibrating the cameras with large field of view,a flexible stereo cameras calibration method combining 1D target and epipolar geometry is proposed.The global calibration method,aided by a total station,is employed to unify the 3D data obtained from various binocular subsystems.A series of static load tests using a 10-meter-long large-scale wing have been conducted to validate the proposed system and methods.Furthermore,the proposed method was applied to the practical wing deformation measurement of both wings with a wingspan of 33.6 m in the full-size civil aircraft static test.The overall 3D profile and displacement data of the tested wing under various loads can be accurately obtained.The maximum error of distance and displacement measurement is less than 4.5 mm within the measurement range of 35 m in all load cases.These results demonstrate that the proposed method achieves effective,high-accuracy,on-site,and visualized wing deformation measurement,making it a promising approach for full-scale aircraft wing static test.展开更多
Spatial angle measurement,especially the measurement of horizontal and vertical angle,is a basic method used for industrial large-scale coordinate measurement.As main equipments in use,both theodolites and laser track...Spatial angle measurement,especially the measurement of horizontal and vertical angle,is a basic method used for industrial large-scale coordinate measurement.As main equipments in use,both theodolites and laser trackers can provide very high accuracy for spatial angle measurement.However,their industrial applications are limited by low level of automation and poor parallelism.For the purpose of improving measurement efficiency,a lot of studies have been conducted and several alternative methods have been proposed.Unfortunately,all these means are either low precision or too expensive.In this paper,a novel method of spatial angle measurement based on two rotating planar laser beams is proposed and demonstrated.Photoelectric receivers placed on measured points are used to receive the rotating planner laser signals transmitted by laser transmitters.The scanning time intervals of laser planes were measured,and then measured point's horizontal/vertical angles can be calculated.Laser plane's angle parameters are utilized to establish the abstract geometric model of transmitter.Calculating formulas of receiver's horizontal/vertical angles have been derived.Measurement equations'solvability conditions and judgment method of imaginary solutions are also presented after analyzing.Proposed method for spatial angle measurement is experimentally verified through a platform consisting of one laser transmitter and one optical receiver.The transmitters used in new method are only responsible for providing rotating light plane signals carrying angle information.Receivers automatically measure scanning time of laser planes and upload data to the workstation to calculate horizontal angle and vertical angle.Simultaneous measurement of multiple receivers can be realized since there is no human intervention in measurement process.Spatial angle measurement result indicates that the repeatable accuracy of new method is better than 10".Proposed method can improve measurement's automation degree and speed while ensuring measurement accuracy.展开更多
Laser frequency combs,which are composed of a series of equally spaced coherent frequency components,have triggered revolutionary progress in precision spectroscopy and optical metrology.Length/distance is of fundamen...Laser frequency combs,which are composed of a series of equally spaced coherent frequency components,have triggered revolutionary progress in precision spectroscopy and optical metrology.Length/distance is of fundamental importance in both science and technology.We describe a ranging scheme based on chirped pulse interferometry.In contrast to the traditional spectral interferometry,the local oscillator is strongly chirped which is able to meet the measurement pulses at arbitrary distances,and therefore,the dead zones can be removed.The distances can be precisely determined via two measurement steps based on the time-of-flight method and synthetic wavelength interferometry,respectively.To overcome the speed limitation of the optical spectrum analyzer,the spectrograms are stretched and detected by a fast photodetector and oscilloscope and consequently mapped into the time domain in real time.The experimental results indicate that the measurement uncertainty can be well within±2μm,compared with the reference distance meter.The Allan deviation can reach 0.4μm at 4 ns averaging time and 25 nm at 1μs and can achieve 2 nm at 100μs averaging time.We also measured a spinning disk with grooves of different depths to verify the measurement speed,and the results show that the grooves with about 150 m∕s line speed can be clearly captured.Our method provides a unique combination of non-dead zones,ultrafast measurement speed,high precision and accuracy,large ambiguity range,and only one single comb source.This system could offer a powerful solution for field measurements in practical applications in the future.展开更多
To overcome the difficulty and high cost of some specific isotopic targets,a substitution method was proposed to measure the cross section of the(γ,n)reactions.Considering that the natural copper element(^(nat)Cu)onl...To overcome the difficulty and high cost of some specific isotopic targets,a substitution method was proposed to measure the cross section of the(γ,n)reactions.Considering that the natural copper element(^(nat)Cu)only has^(63)Cu and^(65)Cu isotopes,the^(65)Cu(γ,n)^(64)Cu reaction was taken as an example to test the substitution method.Using quasi-monoenergeticγbeams provided by the Shanghai Laser Electron Gamma Source(SLEGS)of the Shanghai Synchrotron Radiation Facility(SSRF),^(nat)Cu(γ,n)was measured from E_(γ)=11.09 MeV to 17.87 MeV.Furthermore,based on the^(63)Cu(γ,n)reaction measured using the same experimental setup at SLEGS,^(65)Cu(γ,n)^(64)Cu was extracted using the substitution method.The abundance variation of natural copper,showing a significant influence on the cross section,was also investigated.The results were compared to the existing experimental data measured by bremsstrahlung and positron annihilation in-flight sources,and the TALYS 2.0 predictions.Theγstrength function(γSF)of^(65)Cu was obtained from the^(65)Cu(γ,n)data,and the reaction cross section of^(64)Cu(n,γ)was further calculated.展开更多
Fuel cell electric vehicles hold great promise for a diverse range of applications in reducing greenhouse gas emissions.In power fuel cell systems,hydrogen fuel serves as an energy vector.To ensure its suitability,it ...Fuel cell electric vehicles hold great promise for a diverse range of applications in reducing greenhouse gas emissions.In power fuel cell systems,hydrogen fuel serves as an energy vector.To ensure its suitability,it is necessary for the quality of hydrogen to adhere to the standards set by ISO 14687:2019,which sets maximum limits for 14 impurities in hydrogen,aiming to prevent any degradation of fuel cell performance.Ammonia(NH_(3))is a prominent pollutant in fuel cells,and accurate measurements of its concentration are crucial for hydrogen fuel cell quantity.In this study,a novel detection platform was developed for determining NH_(3)in real hydrogen samples.The online analysis platform integrates a self-developed online dilution module with a Fourier transform infrared spectrometer(ODM-FTIR).The ODM-FTIR can be operated fully automatically with remote operation.Under the optimum conditions,this method achieved a wide linear range between(50∼1000)nmol/mol.The limit of detection(LOD)was as low as 2 nmol/mol with a relative standard deviation(RSD,n=7)of 3.6%at a content of 50 nmol/mol.To ensure that the quality of the hydrogen products meets the requirement of proton exchange membrane fuel cell vehicles(PEMFCV),the developed ODM-FTIR system was applied to monitor the NH_(3)content in Chengdu Hydrogen Energy Co.,Ltd.for 21 days during Chengdu 2021 FISU World University Games.The proposed method retains several unique advantages,including a low detection limit,excellent repeatability,high accuracy,high speed,good stability,and calibration flexibility.It is an effective analytical method for accurately quantifying NH_(3)in hydrogen,especially suitable for online analysis.It also provides a new idea for the analysis of other impurity components in hydrogen.展开更多
The Fringe Projection Profilometry(FPP)system with a single exposure time or a single projection intensity is limited by the dynamic range of the camera,which can lead to overexposure and underexposure of the image,re...The Fringe Projection Profilometry(FPP)system with a single exposure time or a single projection intensity is limited by the dynamic range of the camera,which can lead to overexposure and underexposure of the image,resulting in point cloud loss or reduced accuracy.To address this issue,unlike the pixel modulation method of projectors,we utilize the characteristics of color projectors where the intensity of the three-channel LED can be controlled independently.We propose a method for separating the projector's three-channel light intensity,combined with a color camera,to achieve single exposure and multi-intensity image acquisition.Further,the crosstalk coefficient is applied to predict the three-channel reflectance of the measured object.By integrating clustering and channel mapping,we establish a pixel-level mapping model between the projector's three-channel current and the camera's three-channel image intensity,which realizes the optimal projection current prediction and the high dynamic range(HDR)image acquisition.The proposed method allows for high-precision three-dimensional(3D)data acquisition of HDR scenes with a single exposure.The effectiveness of this method has been validated through experiments with standard planes and standard steps,showing a significant reduction in mean absolute error(44.6%)compared to existing singleexposure HDR methods.Additionally,the number of images required for acquisition is significantly reduced(by 70.8%)compared to multi-exposure fusion methods.This proposed method has great potential in various FPP-related fields.展开更多
Natural gas measurement is an important basic job in national,social and economic development,and accurate and reliable measurement is an important guarantee for promoting the rapid development of natural gas industry...Natural gas measurement is an important basic job in national,social and economic development,and accurate and reliable measurement is an important guarantee for promoting the rapid development of natural gas industry in China.In this paper,the importance and characteristics of natural gas measurement were analyzed.Then,domestic and foreign natural gas measurement technologies were analyzed and compared from the aspects of measurement technological standard system,measuring instrument application technology,custody transfer metering mode in natural gas trade,measurement value traceability system and measurement management.Finally,the development of domestic natural gas flow metering technologies was summarized and predicted.And the following research results were obtained.First,natural gas measurement is a kind of large-quantity dynamic gas measurement with compressible medium,and the measurement result is derived from the flow rate,composition,temperature,pressure and other data under working conditions.Therefore,the accuracy of the measurement results cannot be guaranteed unless each basic data is measured accurately.Second,a natural gas measurement technology system has been established in China,including measurement laws and regulations,measurement technological standards and specifications,measurement value traceability technology,measuring tool application technology and measurement management system.Third,with the high-quality rapid development of domestic natural gas industry,China's natural gas measurement technology system will get improved continuously and be in line with international standards further.The guarantee for the reliability of measuring instrument may be transformed from compulsory verification to traceability based on verification or calibration,and the nationalization process of measuring tools will be sped up.In addition,the metering mode in natural gas trade will be changed greatly from volume measurement to energy measurement.In conclusion,China's natural gas measurement technology system basically guarantees the rapid development of its natural gas industry,but it still needs further improvement and completion.展开更多
This study utilizes the All-phase Fast Fourier Transform(FFT)spectral analysis phase difference technique combined with a Kaiser-Hanning hybrid convolution window to enhance the displacement resolution of Swept Source...This study utilizes the All-phase Fast Fourier Transform(FFT)spectral analysis phase difference technique combined with a Kaiser-Hanning hybrid convolution window to enhance the displacement resolution of Swept Source Optical Coherence Tomography(SS-OCT),enabling sub-nanometer level micro-vibration measurements.By employing a designed ultrasmall Gradient Index(GRIN)fiber probe,the signal-to-noise ratio(SNR)is increased to 40 dB,and the frequency estimation error of the All-phase FFT phase difference method is reduced to 10^-4.An SS-OCT system incorporating the ultra-small GRIN probe is developed and applied to micro-vibration detection experiments.The system successfully captures vibration signals from a 0.8 mm diameter micro-motor shaft,showing an increase in vibration amplitude from 2μm to 6μm after damage.Experimental results demonstrate a displacement resolution of 1 nm under optimal conditions.These findings highlight the potential of the ultra-small GRIN fiber probe-based SS-OCT system for detecting micro-mechanical damage and the effectiveness of the All-phase FFT spectral analysis phase difference method in improving the system's displacement resolution,enabling the fiber-optic SS-OCT system to maintain sub-nanometerlevel measurement precision.展开更多
Traceability is the fundamental premise of all metrological activities. The establishment of a traceability chain characterized by a shortened structure, while simultaneously enabling on-site traceability, represents ...Traceability is the fundamental premise of all metrological activities. The establishment of a traceability chain characterized by a shortened structure, while simultaneously enabling on-site traceability, represents a key trend in the advancement of metrology. This study explores the periodic accuracy and overall uniformity of self-traceable gratings, employing multilayer film gratings with a nominal period of 25.00 nm as the medium. We present a comparative analysis of measurement capabilities in a self-traceable grating calibration system characterized by a ‘top-down’ calibration approach and a Si lattice constant calibration system characterized by a ‘bottom-up’ calibration approach. The results indicate that the values obtained for the multilayer film grating periods, calibrated using the self-traceable grating system, are 24.40 nm with a standard deviation of 0.11 nm. By comparing with the values derived from the Si lattice constant, which yield 24.34 nm with a standard deviation of 0.14 nm, the validity and feasibility of the self-traceable calibration system are confirmed. This system extends and complements existing metrological frameworks, offering a precise pathway for traceability in precision engineering and nanotechnology research.展开更多
Developments of the micro-Gal level gravimeter based on atom interferometry are reviewed, and the recent progress and results of our group are also presented. Atom interferometric gravimeters have shown high resolutio...Developments of the micro-Gal level gravimeter based on atom interferometry are reviewed, and the recent progress and results of our group are also presented. Atom interferometric gravimeters have shown high resolution and accuracy for gravity measurements. This kind of quantum sensor has excited world-wide interest for both practical applications and fundamental research.展开更多
Dual-comb ranging allows rapid and precise distance measurement and can be universally implemented on different comb platforms,e.g.,fiber combs and microcombs.To date,dual-fiber-comb ranging has become a mature and po...Dual-comb ranging allows rapid and precise distance measurement and can be universally implemented on different comb platforms,e.g.,fiber combs and microcombs.To date,dual-fiber-comb ranging has become a mature and powerful tool for metrology and industry,but the measurement speed is often at a kilohertz level due to the lower repetition rates.Recently,dual-microcomb ranging has given rise to a new opportunity for distance measurement,in consequence of its small footprint and high repetition rates,but full-comb stabilization is challenging.Here,we report a dual-hybrid-comb distance meter capable of ultrarapid and submicrometer precision distance measurement,which can not only leverage the advantage of easy locking inherited from the fiber comb but also sustain ultrarapid measurement speed due to the microcomb.The experimental results show that the measurement precision can reach 3.572μm at 4.136μs and 432 nm at 827.2μs averaging time.Benefiting from the large difference between the repetition rates of the hybrid combs,the measurement speed can be enhanced by 196 folds,in contrast to the dual-fiber-comb system with about a 250 MHz repetition rate.Our work can offer a solution for the fields of rapid dimensional measurement and spectroscopy.展开更多
In order to achieve high precision measurement of inductance in a wide frequency range,a method of inductance measurement based on double-excitation auto-balancing bridge is proposed.In this method,the direct digital ...In order to achieve high precision measurement of inductance in a wide frequency range,a method of inductance measurement based on double-excitation auto-balancing bridge is proposed.In this method,the direct digital synthesizer(DDS)as signal generator is used as the bridge excitation source,and the bridge is automatically balanced by adjusting and measuring the voltage ratio.Using standard resistors,the system can achieve high precision measurement of four-terminal pair inductors in the frequency range of 100Hz-100kHz.Aiming at the low efficiency of bridge balancing,an iterative balancing algorithm based on the steepest descent method is proposed.In order to suppress the interference caused by the initial phase change and non-integer periodic sampling,the high-precision measurement of the complex impedance of inductance is realized based on the all-phase fast Fourier transform(apFFT).Finally,the corresponding measurement system is built and the inductance measurement experiment is carried out.The experimental results show that the relative error of the system for inductance measurement can be as low as 0.009%,and the optimal relative measurement uncertainty of the system can reach 9.89×10^(-4)compared with 5×10^(-5)of commercial impedance analyzer.展开更多
The paper demonstrated the feasibility of Lorentz Force Velocimetry for flow rate measurements of weakly conducting electrolytes using experimental results on salt water flow exposed to a permanent magnet system.This ...The paper demonstrated the feasibility of Lorentz Force Velocimetry for flow rate measurements of weakly conducting electrolytes using experimental results on salt water flow exposed to a permanent magnet system.This innovative flow measurement technique allows the non-contact determination of flow rates and relies on the interaction between a magnetic field and a moving conducting fluid.When an electrically conducting fluid moves through the magnetic field a Lorentz force is generated and acts on the measurement system.The present report provides an overview about the experimental setups and the first measurement results.展开更多
A method was proposed to analyze the influences of the non-ideal spectroscopic performance of optical components and orientation errors of a laser tracing measurement optical system on the tracing measurement performa...A method was proposed to analyze the influences of the non-ideal spectroscopic performance of optical components and orientation errors of a laser tracing measurement optical system on the tracing measurement performance.A comprehensive model of the interference fringe contrast based on the laser tracing system s measurement principle was established in this study.Simulation results based on ZEMAX verified the model.According to the simulation results,the placement angle of the analyzer had a direct influence on the interference fringe contrast.When the angle of the polarized light to the analyzer’s transmission axis increased from 65°to 85°,each contrast of the four-way interference fringes decreased from 0.9996 to 0.3528,the interference fringe contrast is decreased by 65%.Under the split ratio of beam splitters in the interference part(BS 1)of 5∶5,when the splitting ratio of BS 2 changed from 2∶8 to 8∶2,the fringe contrast of the interference signals received by the photodetectors increased,but the injection light intensity onto the PSD reflected by BS 2 decreased.The significant influence of the tracing performance was verified by the experiments.When splitting ratio of BS 2 increased,the contrast of the interference fringes increased.Due to the weakening of the incident light intensity of the PSD caused by the change of BS 2 splitting ratio,the response time of the tracing system is increased by 23.7 ms.As a result,the tracing performance of the laser tracing measurement optical system was degraded.An important theoretical basis was provided to evaluate and improve the accuracy and reliability of laser tracing measurement systems.展开更多
The velocity of warhead fragment is key criteria to determine its mutilation efficiency.We have designed an optoelectronic system to accurately measure the average velocity of warhead fragments.The apparatus including...The velocity of warhead fragment is key criteria to determine its mutilation efficiency.We have designed an optoelectronic system to accurately measure the average velocity of warhead fragments.The apparatus including two parallel laser screens spaced apart at a known fixed distance for providing time measurement start and stop signals.The large effective screen area is formed by laser source,retro-reflector and large area photo-diode with a central hole.Whenever a moving fragment interrupts two optical screen,the corresponding photometers senses the event,due to partial obscuration of the incident energy.Experiments have been performed to measure velocity of the different kinds of projectiles and fragments within various size and velocity ranges,including 7.62 mm bullet shooting experiments,prefabricated steel-ball exploding experiments.They were proved that the system is adequate to measure the velocity of larger than 5 mm,less than 1 000 m/s in the range,when fixed trajectory,test the velocity of the projectile average relative deviation is less than 4.21%.The system can perform satisfactorily with a lot of advantages such as larger effective light screen area,quick response speed,low uncertainty,strong repetition and reliability,etc.展开更多
The accurate photoneutron cross section of the^(27)Al nucleus has a significant impact on resolving differences in existing experimental data and enhancing the precision of nuclear reaction rate calculations for^(26)A...The accurate photoneutron cross section of the^(27)Al nucleus has a significant impact on resolving differences in existing experimental data and enhancing the precision of nuclear reaction rate calculations for^(26)Al in nuclear astrophysics.The photoneutron cross sections for the^(27)Al(γ,n)^(26)Al reaction,within the neutron separation energy range of 13.2-21.7 MeV,were meticulously measured using a new flat efficiency detector array at the Shanghai Laser-Electron Gamma Source.The uncertainty of the data was controlled to below 4%throughout the process,and inconsistencies between the present data and existing data from different gamma sources,as well as the TENDL-2021 data,are discussed in detail.These discussions provide a valuable reference for addressing discrepancies in the^(27)Al(γ,n)^(26)Al cross-section data and improving related theoretical calculations.展开更多
文摘Standardization is necessary for the early industrialization of the new materials and technology.It is achieved by having agreed practices for the measurement of properties and other characteristics.The promising use of graphene-based materials in fields like electronics,energy,and composites has resulted in standards for their nomenclature,the measurement of key characteristics,and their specification,etc.Among these,standards for measuring the key characteristics are crucial.The critical parameters are the number of layers,the type and concentration of defects and functional groups,elemental composition,sheet resistance,and carrier mobility.Standards for characterizing these have been analyzed by the International Organization for Standardization Technical Committee in ISO/TC229 and the International Electrotechnical Commission Technical Committee in IEC/TC113.These give details of applicable or preferred samples,the fundamental principles of the techniques,specific precautions,and points for attention in the relevant standards.The pivotal role of the ISO/TC229 and IEC/TC113 standards is considered and challenges and future trends are outlined.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0920000)the National Natural Science Foundation of China(Grant Nos.12121004 and U21A20435)+1 种基金the Chinese Academy of Sciences Project for Young Scientists in Basic Research(Grant No.YSBR-055)the Science and Technology Department of Hubei Province(Grant No.2025AFA004)。
文摘The thorium-229 nucleus possesses a uniquely low-energy nuclear transition(-8.4 eV,corresponding to a wavelength of-148 nm),which is the first confirmed nuclear excitation that can be coherently manipulated by narrow-linewidth lasers.Consequently,this transition has garnered widespread interest over the past decades.Owing to the small nuclear size and strong resistance to environmental perturbations,a thorium-based nuclear clock is theoretically capable of achieving an unprecedented fractional frequency uncertainty at the 10^(−20) level,offering great promise as a next-generation frequency standard.Among the key ingredients of such a thorium-based nuclear clock,a high-performance 148 nm excitation source is of critical importance.Since the feasibility of directly exciting the transition,as well as the overall clock performance,depends heavily on the availability and quality of such a source,the development of high-quality 148 nm laser sources represents a frontier for scientists worldwide.In this article,we provide a systematic overview of the current development of 148 nm laser sources.First,we briefly introduce the scientific motivation for high-precision spectroscopy of the thorium nuclear transition and the corresponding technical requirements for 148 nm laser sources.Then,we summarize four main types of existing 148 nm source generation schemes and their working principles,along with recent progress in nuclear transition measurements using such sources.Finally,we discuss potential future directions.
基金supported by the Science and Technology Program Project of Tianjin(No.24ZXZSSS00300).
文摘Grating fringe projection 3D measurement techniques are extensively applied in various fields.However,in high dynamic range scenarios with significant surface reflectivity variations,uneven greyscale distribution may lead to phase errors and poor reconstruction results.To address this problem,an adaptive fringe projection method is introduced.The method involves projecting two sets of dark and light fringes onto the object,enabling the full-field projection intensity map to be generated adaptively based on greyscale analysis.First,dark fringes are projected onto the object to extend exposure time as long as possible without causing overexposure in the image.Subsequently,bright fringes are projected under the same exposure settings to detect overexposed pixels,and the greyscale distribution of these overexposed points from the previous dark fringe projection is analyzed to calculate the corresponding projection intensities.Finally,absolute phase information from orthogonal fringes is used for coordinate matching,enabling the generation of adaptive projection fringe patterns.Experiments on various high dynamic range objects show that compared to conventional fringe projection binocular reconstruction method,the proposed algorithm achieves complete reconstruction of high dynamic range surfaces and shows robust performance against phase calculation errors caused by overexposure and low modulation.
基金the National Natural Science Foundation of China(Nos.52275038 and 61803347)the Shanxi Province Science Foundation for Excellent Youth(No.202203021224007)+1 种基金the Key Research and Development Plan of Shanxi Province(No.201903D321164)the Opening Foundation of Shanxi Key Laboratory of Advanced Manufacturing Technology(No.XJZZ202101)。
文摘Magnetic tracking technologies have a promising application in detecting the real-time position andattitude of a capsule endoscope.However,most of them need to measure the magnetic moment of a permanentmagnet(PM)embedded in the capsule accurately in advance,which can cause inconvenience to practical application.To solve this problem,this paper proposes a magnetic tracking system with the capability of measuring themagnetic moment of the PM automatically.The system is constructed based on a 4×4 magnetic sensor array,whose sensing data is analyzed to determine the magnetic moment by referring to a magnetic dipole model.Withthe determined magnetic moment,a method of fusing the linear calculation and Levenberg-Marquardt algorithmsis proposed to determine the 3D position and 2D attitude of the PM.The experiments verified that the proposedsystem can achieve localization errors of 0.48 mm,0.42 mm,and 0.83 mm and orientation errors of 0.66◦,0.64◦,and 0.87◦for a PM(∅10 mm×10 mm)at vertical heights of 5 cm,10 cm,and 15 cm from the magnetic sensorarray,respectively.
文摘To obtain the certificate of airworthiness,it is essential to conduct a full-scale aircraft static test.During such test,accurate and comprehensive wing deformation measurement is crucial for assessing its strength,stiffness,and bearing capability.This paper proposes a novel and cost-effective videogrammetric method using multi-camera system to achieve the non-contact,highprecision,and 3D measurement of overall static deformation for the large-scale wing structure.To overcome the difficulties of making,carrying,and employing the large 2D or 3D target for calibrating the cameras with large field of view,a flexible stereo cameras calibration method combining 1D target and epipolar geometry is proposed.The global calibration method,aided by a total station,is employed to unify the 3D data obtained from various binocular subsystems.A series of static load tests using a 10-meter-long large-scale wing have been conducted to validate the proposed system and methods.Furthermore,the proposed method was applied to the practical wing deformation measurement of both wings with a wingspan of 33.6 m in the full-size civil aircraft static test.The overall 3D profile and displacement data of the tested wing under various loads can be accurately obtained.The maximum error of distance and displacement measurement is less than 4.5 mm within the measurement range of 35 m in all load cases.These results demonstrate that the proposed method achieves effective,high-accuracy,on-site,and visualized wing deformation measurement,making it a promising approach for full-scale aircraft wing static test.
基金supported by Key Program of National Natural Science Foundation of China(Grant No.50735003)
文摘Spatial angle measurement,especially the measurement of horizontal and vertical angle,is a basic method used for industrial large-scale coordinate measurement.As main equipments in use,both theodolites and laser trackers can provide very high accuracy for spatial angle measurement.However,their industrial applications are limited by low level of automation and poor parallelism.For the purpose of improving measurement efficiency,a lot of studies have been conducted and several alternative methods have been proposed.Unfortunately,all these means are either low precision or too expensive.In this paper,a novel method of spatial angle measurement based on two rotating planar laser beams is proposed and demonstrated.Photoelectric receivers placed on measured points are used to receive the rotating planner laser signals transmitted by laser transmitters.The scanning time intervals of laser planes were measured,and then measured point's horizontal/vertical angles can be calculated.Laser plane's angle parameters are utilized to establish the abstract geometric model of transmitter.Calculating formulas of receiver's horizontal/vertical angles have been derived.Measurement equations'solvability conditions and judgment method of imaginary solutions are also presented after analyzing.Proposed method for spatial angle measurement is experimentally verified through a platform consisting of one laser transmitter and one optical receiver.The transmitters used in new method are only responsible for providing rotating light plane signals carrying angle information.Receivers automatically measure scanning time of laser planes and upload data to the workstation to calculate horizontal angle and vertical angle.Simultaneous measurement of multiple receivers can be realized since there is no human intervention in measurement process.Spatial angle measurement result indicates that the repeatable accuracy of new method is better than 10".Proposed method can improve measurement's automation degree and speed while ensuring measurement accuracy.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFC2204601)the National Natural Science Foundation of China(Grant Nos.11925503 and 12275093)+1 种基金the Natural Science Foundation of Hubei Province(Grant No.2021CFB019)the State Key Laboratory of Applied Optics(Grant No.SKLAO2022001A10).
文摘Laser frequency combs,which are composed of a series of equally spaced coherent frequency components,have triggered revolutionary progress in precision spectroscopy and optical metrology.Length/distance is of fundamental importance in both science and technology.We describe a ranging scheme based on chirped pulse interferometry.In contrast to the traditional spectral interferometry,the local oscillator is strongly chirped which is able to meet the measurement pulses at arbitrary distances,and therefore,the dead zones can be removed.The distances can be precisely determined via two measurement steps based on the time-of-flight method and synthetic wavelength interferometry,respectively.To overcome the speed limitation of the optical spectrum analyzer,the spectrograms are stretched and detected by a fast photodetector and oscilloscope and consequently mapped into the time domain in real time.The experimental results indicate that the measurement uncertainty can be well within±2μm,compared with the reference distance meter.The Allan deviation can reach 0.4μm at 4 ns averaging time and 25 nm at 1μs and can achieve 2 nm at 100μs averaging time.We also measured a spinning disk with grooves of different depths to verify the measurement speed,and the results show that the grooves with about 150 m∕s line speed can be clearly captured.Our method provides a unique combination of non-dead zones,ultrafast measurement speed,high precision and accuracy,large ambiguity range,and only one single comb source.This system could offer a powerful solution for field measurements in practical applications in the future.
基金supported by the National key R&D program(Nos.2022YFA1602404 and 2023YFA1606901)the National Natural Science Foundation of China(Nos.12375123 and 12388102)the Natural Science Foundation of Henan Province(No.242300422048).
文摘To overcome the difficulty and high cost of some specific isotopic targets,a substitution method was proposed to measure the cross section of the(γ,n)reactions.Considering that the natural copper element(^(nat)Cu)only has^(63)Cu and^(65)Cu isotopes,the^(65)Cu(γ,n)^(64)Cu reaction was taken as an example to test the substitution method.Using quasi-monoenergeticγbeams provided by the Shanghai Laser Electron Gamma Source(SLEGS)of the Shanghai Synchrotron Radiation Facility(SSRF),^(nat)Cu(γ,n)was measured from E_(γ)=11.09 MeV to 17.87 MeV.Furthermore,based on the^(63)Cu(γ,n)reaction measured using the same experimental setup at SLEGS,^(65)Cu(γ,n)^(64)Cu was extracted using the substitution method.The abundance variation of natural copper,showing a significant influence on the cross section,was also investigated.The results were compared to the existing experimental data measured by bremsstrahlung and positron annihilation in-flight sources,and the TALYS 2.0 predictions.Theγstrength function(γSF)of^(65)Cu was obtained from the^(65)Cu(γ,n)data,and the reaction cross section of^(64)Cu(n,γ)was further calculated.
基金financial support by Sichuan Science and Technology,China(No.2023YFG0070).
文摘Fuel cell electric vehicles hold great promise for a diverse range of applications in reducing greenhouse gas emissions.In power fuel cell systems,hydrogen fuel serves as an energy vector.To ensure its suitability,it is necessary for the quality of hydrogen to adhere to the standards set by ISO 14687:2019,which sets maximum limits for 14 impurities in hydrogen,aiming to prevent any degradation of fuel cell performance.Ammonia(NH_(3))is a prominent pollutant in fuel cells,and accurate measurements of its concentration are crucial for hydrogen fuel cell quantity.In this study,a novel detection platform was developed for determining NH_(3)in real hydrogen samples.The online analysis platform integrates a self-developed online dilution module with a Fourier transform infrared spectrometer(ODM-FTIR).The ODM-FTIR can be operated fully automatically with remote operation.Under the optimum conditions,this method achieved a wide linear range between(50∼1000)nmol/mol.The limit of detection(LOD)was as low as 2 nmol/mol with a relative standard deviation(RSD,n=7)of 3.6%at a content of 50 nmol/mol.To ensure that the quality of the hydrogen products meets the requirement of proton exchange membrane fuel cell vehicles(PEMFCV),the developed ODM-FTIR system was applied to monitor the NH_(3)content in Chengdu Hydrogen Energy Co.,Ltd.for 21 days during Chengdu 2021 FISU World University Games.The proposed method retains several unique advantages,including a low detection limit,excellent repeatability,high accuracy,high speed,good stability,and calibration flexibility.It is an effective analytical method for accurately quantifying NH_(3)in hydrogen,especially suitable for online analysis.It also provides a new idea for the analysis of other impurity components in hydrogen.
文摘The Fringe Projection Profilometry(FPP)system with a single exposure time or a single projection intensity is limited by the dynamic range of the camera,which can lead to overexposure and underexposure of the image,resulting in point cloud loss or reduced accuracy.To address this issue,unlike the pixel modulation method of projectors,we utilize the characteristics of color projectors where the intensity of the three-channel LED can be controlled independently.We propose a method for separating the projector's three-channel light intensity,combined with a color camera,to achieve single exposure and multi-intensity image acquisition.Further,the crosstalk coefficient is applied to predict the three-channel reflectance of the measured object.By integrating clustering and channel mapping,we establish a pixel-level mapping model between the projector's three-channel current and the camera's three-channel image intensity,which realizes the optimal projection current prediction and the high dynamic range(HDR)image acquisition.The proposed method allows for high-precision three-dimensional(3D)data acquisition of HDR scenes with a single exposure.The effectiveness of this method has been validated through experiments with standard planes and standard steps,showing a significant reduction in mean absolute error(44.6%)compared to existing singleexposure HDR methods.Additionally,the number of images required for acquisition is significantly reduced(by 70.8%)compared to multi-exposure fusion methods.This proposed method has great potential in various FPP-related fields.
基金Project supported by CNPC Scientific Research Project“Study on Standards for Metering&Inspection upon Delivery during Natural Gas Trading”(No.:2016D-4704).
文摘Natural gas measurement is an important basic job in national,social and economic development,and accurate and reliable measurement is an important guarantee for promoting the rapid development of natural gas industry in China.In this paper,the importance and characteristics of natural gas measurement were analyzed.Then,domestic and foreign natural gas measurement technologies were analyzed and compared from the aspects of measurement technological standard system,measuring instrument application technology,custody transfer metering mode in natural gas trade,measurement value traceability system and measurement management.Finally,the development of domestic natural gas flow metering technologies was summarized and predicted.And the following research results were obtained.First,natural gas measurement is a kind of large-quantity dynamic gas measurement with compressible medium,and the measurement result is derived from the flow rate,composition,temperature,pressure and other data under working conditions.Therefore,the accuracy of the measurement results cannot be guaranteed unless each basic data is measured accurately.Second,a natural gas measurement technology system has been established in China,including measurement laws and regulations,measurement technological standards and specifications,measurement value traceability technology,measuring tool application technology and measurement management system.Third,with the high-quality rapid development of domestic natural gas industry,China's natural gas measurement technology system will get improved continuously and be in line with international standards further.The guarantee for the reliability of measuring instrument may be transformed from compulsory verification to traceability based on verification or calibration,and the nationalization process of measuring tools will be sped up.In addition,the metering mode in natural gas trade will be changed greatly from volume measurement to energy measurement.In conclusion,China's natural gas measurement technology system basically guarantees the rapid development of its natural gas industry,but it still needs further improvement and completion.
基金funded by the National Natural Science Foundation of China (NSFC)(62405174)State Key Laboratory of Precision Measurement Technology and Instruments (Pilab2402)Fundamental Research Funds for the Central Universities (3122016C010)。
文摘This study utilizes the All-phase Fast Fourier Transform(FFT)spectral analysis phase difference technique combined with a Kaiser-Hanning hybrid convolution window to enhance the displacement resolution of Swept Source Optical Coherence Tomography(SS-OCT),enabling sub-nanometer level micro-vibration measurements.By employing a designed ultrasmall Gradient Index(GRIN)fiber probe,the signal-to-noise ratio(SNR)is increased to 40 dB,and the frequency estimation error of the All-phase FFT phase difference method is reduced to 10^-4.An SS-OCT system incorporating the ultra-small GRIN probe is developed and applied to micro-vibration detection experiments.The system successfully captures vibration signals from a 0.8 mm diameter micro-motor shaft,showing an increase in vibration amplitude from 2μm to 6μm after damage.Experimental results demonstrate a displacement resolution of 1 nm under optimal conditions.These findings highlight the potential of the ultra-small GRIN fiber probe-based SS-OCT system for detecting micro-mechanical damage and the effectiveness of the All-phase FFT spectral analysis phase difference method in improving the system's displacement resolution,enabling the fiber-optic SS-OCT system to maintain sub-nanometerlevel measurement precision.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61925504 and 52475563)the National Key Research and Development Program of China (Grant Nos. 2022YFF0607600 and 2022YFF0605502)+1 种基金Key Laboratory of Metrology and Calibration Technology Fund Project (Grant No. JLKG2023001B001)Aeronautical Science Foundation Project (Grant No. 20230056038001)。
文摘Traceability is the fundamental premise of all metrological activities. The establishment of a traceability chain characterized by a shortened structure, while simultaneously enabling on-site traceability, represents a key trend in the advancement of metrology. This study explores the periodic accuracy and overall uniformity of self-traceable gratings, employing multilayer film gratings with a nominal period of 25.00 nm as the medium. We present a comparative analysis of measurement capabilities in a self-traceable grating calibration system characterized by a ‘top-down’ calibration approach and a Si lattice constant calibration system characterized by a ‘bottom-up’ calibration approach. The results indicate that the values obtained for the multilayer film grating periods, calibrated using the self-traceable grating system, are 24.40 nm with a standard deviation of 0.11 nm. By comparing with the values derived from the Si lattice constant, which yield 24.34 nm with a standard deviation of 0.14 nm, the validity and feasibility of the self-traceable calibration system are confirmed. This system extends and complements existing metrological frameworks, offering a precise pathway for traceability in precision engineering and nanotechnology research.
基金supported by the National Natural Science Foundation of China(Grant Nos.41127002,11204094,11205064,and 11474115)the National High Technology Research and Development Program of China(Grant No.2011AA060503)
文摘Developments of the micro-Gal level gravimeter based on atom interferometry are reviewed, and the recent progress and results of our group are also presented. Atom interferometric gravimeters have shown high resolution and accuracy for gravity measurements. This kind of quantum sensor has excited world-wide interest for both practical applications and fundamental research.
基金supported by the National Key Research and Development Program of China(Grant No.2021YFB2800603)the CAS Project for Young Scientists in Basic Research(Grant No.YSBR-069)+1 种基金the National Natural Science Foundation of China(Grant Nos.62075238 and 12275093)the Innovation Program for Quantum Science and Technology(Grant Nos.2021ZD0301500 and 2021ZD0300701).
文摘Dual-comb ranging allows rapid and precise distance measurement and can be universally implemented on different comb platforms,e.g.,fiber combs and microcombs.To date,dual-fiber-comb ranging has become a mature and powerful tool for metrology and industry,but the measurement speed is often at a kilohertz level due to the lower repetition rates.Recently,dual-microcomb ranging has given rise to a new opportunity for distance measurement,in consequence of its small footprint and high repetition rates,but full-comb stabilization is challenging.Here,we report a dual-hybrid-comb distance meter capable of ultrarapid and submicrometer precision distance measurement,which can not only leverage the advantage of easy locking inherited from the fiber comb but also sustain ultrarapid measurement speed due to the microcomb.The experimental results show that the measurement precision can reach 3.572μm at 4.136μs and 432 nm at 827.2μs averaging time.Benefiting from the large difference between the repetition rates of the hybrid combs,the measurement speed can be enhanced by 196 folds,in contrast to the dual-fiber-comb system with about a 250 MHz repetition rate.Our work can offer a solution for the fields of rapid dimensional measurement and spectroscopy.
基金National Key Research and Development Plan Project(No.2020YFB2010800)National Natural Science Foundation of China(Nos.61905175,51775377,61971307)+4 种基金Fok Ying Tung Education Foundation(No.171055)China Postdoctoral Science Foundation(No.2020M680878)Guangdong Province Key Research and Development Plan Project(No.2020B0404030001)Tianjin Science and Technology Plan Project(No.20YDTPJC01660)Project of Foreign Affairs Committee of China Aviation Development Sichuan Gas Turbine Research Institute(Nos.GJCZ-2020-0040,GJCZ-2020-0041)。
文摘In order to achieve high precision measurement of inductance in a wide frequency range,a method of inductance measurement based on double-excitation auto-balancing bridge is proposed.In this method,the direct digital synthesizer(DDS)as signal generator is used as the bridge excitation source,and the bridge is automatically balanced by adjusting and measuring the voltage ratio.Using standard resistors,the system can achieve high precision measurement of four-terminal pair inductors in the frequency range of 100Hz-100kHz.Aiming at the low efficiency of bridge balancing,an iterative balancing algorithm based on the steepest descent method is proposed.In order to suppress the interference caused by the initial phase change and non-integer periodic sampling,the high-precision measurement of the complex impedance of inductance is realized based on the all-phase fast Fourier transform(apFFT).Finally,the corresponding measurement system is built and the inductance measurement experiment is carried out.The experimental results show that the relative error of the system for inductance measurement can be as low as 0.009%,and the optimal relative measurement uncertainty of the system can reach 9.89×10^(-4)compared with 5×10^(-5)of commercial impedance analyzer.
基金Item Sponsored by German Science Foundation (Deutsche Forschungsgemeinschaft) in the framework of theResearch Training Group (Graduiertenkolleg) "Lorentz Force Velocimetry and Lorentz Force Eddy Current Testing"(GRK 1567/1)at Ilmenau University of Technology
文摘The paper demonstrated the feasibility of Lorentz Force Velocimetry for flow rate measurements of weakly conducting electrolytes using experimental results on salt water flow exposed to a permanent magnet system.This innovative flow measurement technique allows the non-contact determination of flow rates and relies on the interaction between a magnetic field and a moving conducting fluid.When an electrically conducting fluid moves through the magnetic field a Lorentz force is generated and acts on the measurement system.The present report provides an overview about the experimental setups and the first measurement results.
基金Sponsored by the National Natural Science Foundation of China(Grant No.52175491).
文摘A method was proposed to analyze the influences of the non-ideal spectroscopic performance of optical components and orientation errors of a laser tracing measurement optical system on the tracing measurement performance.A comprehensive model of the interference fringe contrast based on the laser tracing system s measurement principle was established in this study.Simulation results based on ZEMAX verified the model.According to the simulation results,the placement angle of the analyzer had a direct influence on the interference fringe contrast.When the angle of the polarized light to the analyzer’s transmission axis increased from 65°to 85°,each contrast of the four-way interference fringes decreased from 0.9996 to 0.3528,the interference fringe contrast is decreased by 65%.Under the split ratio of beam splitters in the interference part(BS 1)of 5∶5,when the splitting ratio of BS 2 changed from 2∶8 to 8∶2,the fringe contrast of the interference signals received by the photodetectors increased,but the injection light intensity onto the PSD reflected by BS 2 decreased.The significant influence of the tracing performance was verified by the experiments.When splitting ratio of BS 2 increased,the contrast of the interference fringes increased.Due to the weakening of the incident light intensity of the PSD caused by the change of BS 2 splitting ratio,the response time of the tracing system is increased by 23.7 ms.As a result,the tracing performance of the laser tracing measurement optical system was degraded.An important theoretical basis was provided to evaluate and improve the accuracy and reliability of laser tracing measurement systems.
基金supported by the Science and Technology on Electronic Test & Measurement Laboratory,China(No.9140C1204041009)Science and Technology on Electronic Test & Measurement Laboratory Fund for Young Scholars,China
文摘The velocity of warhead fragment is key criteria to determine its mutilation efficiency.We have designed an optoelectronic system to accurately measure the average velocity of warhead fragments.The apparatus including two parallel laser screens spaced apart at a known fixed distance for providing time measurement start and stop signals.The large effective screen area is formed by laser source,retro-reflector and large area photo-diode with a central hole.Whenever a moving fragment interrupts two optical screen,the corresponding photometers senses the event,due to partial obscuration of the incident energy.Experiments have been performed to measure velocity of the different kinds of projectiles and fragments within various size and velocity ranges,including 7.62 mm bullet shooting experiments,prefabricated steel-ball exploding experiments.They were proved that the system is adequate to measure the velocity of larger than 5 mm,less than 1 000 m/s in the range,when fixed trajectory,test the velocity of the projectile average relative deviation is less than 4.21%.The system can perform satisfactorily with a lot of advantages such as larger effective light screen area,quick response speed,low uncertainty,strong repetition and reliability,etc.
基金supported by the National key R&D program(Nos.2023YFA1606901 and 2022YFA1602404)the National Natural Science Foundation of China(Nos.12375123 and 12388102)the Natural Science Foundation of Henan Province(No.242300422048)。
文摘The accurate photoneutron cross section of the^(27)Al nucleus has a significant impact on resolving differences in existing experimental data and enhancing the precision of nuclear reaction rate calculations for^(26)Al in nuclear astrophysics.The photoneutron cross sections for the^(27)Al(γ,n)^(26)Al reaction,within the neutron separation energy range of 13.2-21.7 MeV,were meticulously measured using a new flat efficiency detector array at the Shanghai Laser-Electron Gamma Source.The uncertainty of the data was controlled to below 4%throughout the process,and inconsistencies between the present data and existing data from different gamma sources,as well as the TENDL-2021 data,are discussed in detail.These discussions provide a valuable reference for addressing discrepancies in the^(27)Al(γ,n)^(26)Al cross-section data and improving related theoretical calculations.
