The relationships between the microstructure, the composition, the friction temperature and the form of a new kind of friction material which is a glass fibre resin friction materials (GFRF) are studied through a seri...The relationships between the microstructure, the composition, the friction temperature and the form of a new kind of friction material which is a glass fibre resin friction materials (GFRF) are studied through a series of tests on machine as EPMA, STM, DTG-DTA,an optical microscope and a friction test machine. The tests show that the rising rate in temperature and the heat conductivity of GFRF are lower than that of asbestos friction material. In GFRF, the heat-decline is slowed down or even eliminated. the distribution of heat- stress is improved and the life span is extended. Raising the temperature of resin resolution and enhancing the stickness between resin and glass fibre are the two important procedures to improve the friction and wear performance of GFRF.A discription about the friction and wear mechanism of GFRF is given in this paper.展开更多
Glasses based on ZnO-Bi_2O_3-B_2O_3 system are expected to be a new kind of sealing glasses because of their low melting temperature and other properties.In order to reveal the effect of B_2O_3 on the rheological beha...Glasses based on ZnO-Bi_2O_3-B_2O_3 system are expected to be a new kind of sealing glasses because of their low melting temperature and other properties.In order to reveal the effect of B_2O_3 on the rheological behavior of ZnO-Bi_2O_3-B_2O_3 system glass melt,the properties of viscosity,thermal expansion,fluxion property and wetting process between cylinder samples and stainless steel were investigated with the rotating crucible viscometer,dilato meter and high-temperature microscope.The structure of sintered glass samples was investigated with scanning electron microscope.The results show that the B_2O_3 content increasing in B_1-B_3 at the given temperature between 400 ℃ and 500 ℃ leads to the increasing of the sample viscosity.When the amount of B_2O_3 increases from 5.24%to 9.24%(mass fraction),the coefficients of thermal expansion of glass samples decrease smoothly from 10.94×10^(-6) to10.71×10^(-6) and 10.38×10^(-6) ℃^(-1) respectively.In the case of sealing temperature,its value increases from 453 ℃ to 494 ℃.ZnO-Bi_2O_3-B_2O_3 system low-melting glass powder sintering was with viscous liquid to participate,which could make the densification of glass sample more effective and more efficient.With the content of B_2O_3 increasing,the wetting angle between the glasses samples and stainless steel could also increase,and the resulting appropriate sealing temperature range is 460-490 ℃.展开更多
文摘The relationships between the microstructure, the composition, the friction temperature and the form of a new kind of friction material which is a glass fibre resin friction materials (GFRF) are studied through a series of tests on machine as EPMA, STM, DTG-DTA,an optical microscope and a friction test machine. The tests show that the rising rate in temperature and the heat conductivity of GFRF are lower than that of asbestos friction material. In GFRF, the heat-decline is slowed down or even eliminated. the distribution of heat- stress is improved and the life span is extended. Raising the temperature of resin resolution and enhancing the stickness between resin and glass fibre are the two important procedures to improve the friction and wear performance of GFRF.A discription about the friction and wear mechanism of GFRF is given in this paper.
基金Project(2012BAA08B04)supported by the National“Twelfth Five-Year”Plan for Science&Technology Support of China
文摘Glasses based on ZnO-Bi_2O_3-B_2O_3 system are expected to be a new kind of sealing glasses because of their low melting temperature and other properties.In order to reveal the effect of B_2O_3 on the rheological behavior of ZnO-Bi_2O_3-B_2O_3 system glass melt,the properties of viscosity,thermal expansion,fluxion property and wetting process between cylinder samples and stainless steel were investigated with the rotating crucible viscometer,dilato meter and high-temperature microscope.The structure of sintered glass samples was investigated with scanning electron microscope.The results show that the B_2O_3 content increasing in B_1-B_3 at the given temperature between 400 ℃ and 500 ℃ leads to the increasing of the sample viscosity.When the amount of B_2O_3 increases from 5.24%to 9.24%(mass fraction),the coefficients of thermal expansion of glass samples decrease smoothly from 10.94×10^(-6) to10.71×10^(-6) and 10.38×10^(-6) ℃^(-1) respectively.In the case of sealing temperature,its value increases from 453 ℃ to 494 ℃.ZnO-Bi_2O_3-B_2O_3 system low-melting glass powder sintering was with viscous liquid to participate,which could make the densification of glass sample more effective and more efficient.With the content of B_2O_3 increasing,the wetting angle between the glasses samples and stainless steel could also increase,and the resulting appropriate sealing temperature range is 460-490 ℃.
