Titanium alloy has the advantages of high strength,strong corrosion resistance,excellent high and low temperature mechanical properties,etc.,and is widely used in aerospace,shipbuilding,weapons and equipment,and other...Titanium alloy has the advantages of high strength,strong corrosion resistance,excellent high and low temperature mechanical properties,etc.,and is widely used in aerospace,shipbuilding,weapons and equipment,and other fields.In recent years,with the continuous increase in demand for medium-thick plate titanium alloys,corresponding welding technologies have also continued to develop.Therefore,this article reviews the research progress of deep penetration welding technology for medium-thick plate titanium alloys,mainly covering traditional arc welding,high-energy beam welding,and other welding technologies.Among many methods,narrow gap welding,hybrid welding,and external energy field assistance welding all contribute to improving the welding efficiency and quality of medium-thick plate titanium alloys.Finally,the development trend of deep penetration welding technology for mediumthick plate titanium alloys is prospected.展开更多
Based on simplified calculations of one-dimensional wave systems,loading pressure platform curves of Al-Cu gradient materials(GMs)impactor were designed.The Al-Cu GMs were prepared using tape-pressing sintering,and th...Based on simplified calculations of one-dimensional wave systems,loading pressure platform curves of Al-Cu gradient materials(GMs)impactor were designed.The Al-Cu GMs were prepared using tape-pressing sintering,and their acoustic properties were characterized to match the design path.The parallelism of the Al-Cu GM was confirmed using a three-dimensional surface profilometry machine.A one-stage light-gas gun was used to launch the Al-Cu GM,impacting an Al-LiF target at a velocity of 400 m/s.The results of the experimental strain rate demonstrate that the Al-Cu GMs can realize the precise control of the strain rate within the range of 10^(4)‒10^(5)/s in the high-speed impact experiments.展开更多
To improve the slow kinetics and poor mechanical strength of aqueous silver peroxide−aluminum(AgO−Al)battery cathode materials,the effects of different binders including polytetrafluoroethylene(PTFE)and polyvinylpyrro...To improve the slow kinetics and poor mechanical strength of aqueous silver peroxide−aluminum(AgO−Al)battery cathode materials,the effects of different binders including polytetrafluoroethylene(PTFE)and polyvinylpyrrolidone(PVP)on the AgO cathode material were investigated.The samples were characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),cyclic voltammetry(CV),electrochemical impedance spectrum(EIS),and galvanostatic discharge.In contrast to the pure AgO and AgO−PTFE electrodes,the results demonstrated that the PVP effectively bound the electrode materials together.The prepared AgO−PVP as the cathode material of AgO−Al batteries could improve the battery capacity,exhibiting a high specific capacity(389.95 mA·h/g at 500 mA/cm^(2)),a high operating voltage(1.75 V at 500 mA/cm^(2)),a maximum energy density(665.65 W·h/kg),and a maximum power density(5236 W/kg).Furthermore,the electrochemical mechanism of the AgO−PVP cathode material was examined,revealing that the electrode exhibited rapid ion diffusion and effective interfacial ion/electron transport.展开更多
Sodium metal has been widely studied in the field of batteries due to its high theoretical specific capacity(~1,166 m Ah/g),low redox potential(-2.71 V compared to standard hydrogen electrode),and lowcost advantages.H...Sodium metal has been widely studied in the field of batteries due to its high theoretical specific capacity(~1,166 m Ah/g),low redox potential(-2.71 V compared to standard hydrogen electrode),and lowcost advantages.However,problems such as unstable solid electrolyte interface(SEI),uncontrolled dendrite growth,and side reactions between solid-liquid interfaces have hindered the practical application of sodium metal anodes(SMAs).Currently,lots of strategies have been developed to achieve stabilized sodium metal anodes.Among these strategies,modified metal current collectors(MCCs)stand out due to their unique role in accommodating volumetric fluctuations with superior structure,lowering the energy barrier for sodium nucleation,and providing guided uniform sodium deposition.In this review,we first introduced three common metal-based current collectors applied to SMAs.Then,we summarized strategies to improve sodium deposition behavior by optimally engineering the surface of MCCs,including surface loading,surface structural design,and surface engineering for functional modification.We have followed the latest research progress and summarized surface optimization cases on different MCCs and their applications in battery systems.展开更多
Plant cell wall(CW)-like soft materials,referred to as artificial CWs,are composites of assembled polymers containing micro-/nanoparticles or fibers/fibrils that are designed to mimic the composition,structure,and mec...Plant cell wall(CW)-like soft materials,referred to as artificial CWs,are composites of assembled polymers containing micro-/nanoparticles or fibers/fibrils that are designed to mimic the composition,structure,and mechanics of plant CWs.CW-like materials have recently emerged to test hypotheses pertaining to the intricate structure–property relationships of native plant CWs or to fabricate functional materials.Here,research on plant CWs and CW-like materials is reviewed by distilling key studies on biomimetic composites primarily composed of plant polysaccharides,including cellulose,pectin,and hemicellulose,as well as organic polymers like lignin.Micro-and nanofabrication of plant CW-like composites,characterization techniques,and in silico studies are reviewed,with a brief overview of current and potential applications.Micro-/nanofabrication approaches include bacterial growth and impregnation,layer-by-layer assembly,film casting,3-dimensional templating microcapsules,and particle coating.Various characterization techniques are necessary for the comprehensive mechanical,chemical,morphological,and structural analyses of plant CWs and CW-like materials.CW-like materials demonstrate versatility in real-life applications,including biomass conversion,pulp and paper,food science,construction,catalysis,and reaction engineering.This review seeks to facilitate the rational design and thorough characterization of plant CW-mimetic materials,with the goal of advancing the development of innovative soft materials and elucidating the complex structure–property relationships inherent in native CWs.展开更多
In recent years,superhard coatings have emerged as a focal point in metal material research due to their innovative design strategies and exceptional mechanical properties.They are widely utilized in industries such a...In recent years,superhard coatings have emerged as a focal point in metal material research due to their innovative design strategies and exceptional mechanical properties.They are widely utilized in industries such as shielding,oil extraction,and coal mining.However,in practical applications,tools often suffer from wear,fractures,plastic deformation,and other types of failure,directly impacting machining efficiency,costs,and product quality.To mitigate these challenges,the selection of appropriate tool materials and preparation methods is critical to ensure sustained production efficiency.Therefore,it is essential to identify and develop coating materials with superior performance.Recent advancements in superhard coatings are reviewed comprehensively;preparation methods are discussed for superhard tools;diamond coatings,diamond-like carbon coatings,cubic boron nitride coatings and graphite carbon nitride coatings are examined specifically.It analyzes their microstructures,phase transformation processes,mechanical properties,and formation mechanisms,while also evaluating properties such as wear resistance,corrosion resistance,and high hardness.The applicability of existing theoretical models is verified and new frameworks for future superhard coating designs are proposed.Moreover,the current research limitations in tool coatings are identified and directions for future research and development are proposed.展开更多
In this essay,by summarizing the research progress and achievements of various scholars at home and abroad in recent years on the material properties and corrosion resistance of magnesium phosphate cement(MPC),we revi...In this essay,by summarizing the research progress and achievements of various scholars at home and abroad in recent years on the material properties and corrosion resistance of magnesium phosphate cement(MPC),we review the factors influencing on the properties of MPC,and analyze the effects of raw materials,retarders,and admixtures on the properties of MPC.Two different hydration mechanisms of MPC are discussed,and finally the research progress of MPC in the field of anti-corrosion coatings for steel and ordinary concrete(OPC)is highlighted,and suggestions and prospects are given.展开更多
LithiumvanadatesLiV_(3)O_(8)-LiV_(6)O_(15)(LVO)witha heterojunction structure are synthesized using a conventional high-temperature solid-state method to address the challenges of low ionic conductivity,rapid capacity...LithiumvanadatesLiV_(3)O_(8)-LiV_(6)O_(15)(LVO)witha heterojunction structure are synthesized using a conventional high-temperature solid-state method to address the challenges of low ionic conductivity,rapid capacity decay,and poor cycling performance in conventional lithium-ion battery cathode materials.The charge-discharge processes of LVO span multiple platforms,delivering an impressive specific discharge capacity of 219.4 mAh.g^(-1) at 1C.Remarkably,LVO exhibits a high-capacity retention rate of 81.3%after 800 cycles within the typical operating voltage range of lithium-ion batteries(2.8-4.3V).Rate capability tests and electrochemical impedance spectroscopy(EIS)reveal that,compared to traditional cathode materials,LVO significantly enhances Li*diffusion rates(D_(Li*))and reduces charge transfer resistance(Ret).展开更多
Twisted multilayers of two-dimensional materials attract widespread research interest due to their intriguing electronic and optical properties related to their chiral symmetry breaking and moiréeffects.The two-d...Twisted multilayers of two-dimensional materials attract widespread research interest due to their intriguing electronic and optical properties related to their chiral symmetry breaking and moiréeffects.The two-dimensional transition metal dichalcogenide MoSe_(2) is a particularly promising material for twisted multilayers,capable of sustaining moiréexcitons.Here,we report on a rational bottomup synthesis approach for twisted MoSe_(2) flakes by chemical vapor transport(CVT).Screw dislocation-driven growth was forced by surface-fused SiO_(2)nanoparticles on the substrates that serve as potential nucleation points in low supersaturation condition.Thus,crystal growth by in-situ CVT under addition of MoCl_(5) leads to bulk 2H-MoSe_(2) in a temperature gradient from 900 to 820℃ with a dwell time of 96 h.Hexagonally shaped 2H-MoSe_(2) flakes were grown from 710 to 685℃ with a dwell time of 30 min on SiO_(2)@Al_(2)O_(3)(0001)substrates.Electron backscatter diffraction as well as electron microscopy reveals the screw dislocation-driven growth of triangular 3R-MoSe_(2) with individual step heights between 0.9 and 2.9 nm on SiO_(2)@Si(100)under the same conditions.Finally,twisted MoSe_(2) flakes exhibiting a twist angle of 19°with respect to the[010]zone axis could be synthesized.展开更多
Effects of calcined coal gangue （CG） aggregates treated by the surface thermal activation on the flowability and strength, and paste-CG aggregate interfaces of the cement-based material were investigated. The experi...Effects of calcined coal gangue （CG） aggregates treated by the surface thermal activation on the flowability and strength, and paste-CG aggregate interfaces of the cement-based material were investigated. The experimental results show that the compressive and flexural strength of the cement-based material with the calcined CG aggregates is much higher than that of the material with the natural CG aggregates, but the flowability of the material with calcined CG is significantly reduced with the calcined time. The strength of the material with the calcined CG aggregates only increases little with the calcined time at the same w/c ratio, but is reduced with the calcined time at the same flowability. The CG aggregates calcined by the surface thermal activation obviously overcomes the disadvantages of fully calcined CG.展开更多
Using cetyl-trimethyl-ammonium bromide （CTMAB） as the template agent and tetraethylorthosilicate （TEOS） as the silica source, the MCM-41 mesoporous materials were synthesized with La or Ce incorporated in the fram...Using cetyl-trimethyl-ammonium bromide （CTMAB） as the template agent and tetraethylorthosilicate （TEOS） as the silica source, the MCM-41 mesoporous materials were synthesized with La or Ce incorporated in the framework under hydrothermal conditions. The structure and the state of La or Ce were investigated through the analyses of XRD, nitrogen adsorption-desorption, FT-IR, and UV-Vis. XRD and N2 adsorption-desorption results showed that Ln-MCM-41 exhibited the loss of the lattice ordering of the MCM-41 construct, and larger unit cell parameter and pore diameter than pure silica MCM-41. The FT-IR and UV-Vis results indicated the presence of isolated tetra-coordinated La or Ce ions in the framework and other Ln species dispersed highly on the Ln-MCM-41 surface simultaneously. Furthermore, their catalytic behaviors in the oxidation of styrene were studied using H2O2 as the oxidant. The La-MCM-41 catalysts exhibited high reactivity and the reactivity increased with the increase of the La content in the La-MCM-41 samples. On the contrary, Ce-MCM-41 catalysts showed low reactivity in the oxidation of styrene and the conversion of styrene decreased with the increase of the Ce content in the Ce-MCM-41 samples.展开更多
La-doped and La-B-doped KIT-6 mesoporous materials were prepared by direct hydrothermal synthesis with pH-adjusting method and characterized by X-ray diffractometer(XRD),nitrogen sorption,FT-IR,UV-Vis,X-ray photoelect...La-doped and La-B-doped KIT-6 mesoporous materials were prepared by direct hydrothermal synthesis with pH-adjusting method and characterized by X-ray diffractometer(XRD),nitrogen sorption,FT-IR,UV-Vis,X-ray photoelectron spectroscopy(XPS) and ICP-AES.The catalytic performance for the oxidation of styrene by hydrogen peroxide,tert-butyl hydroperoxide or oxygen was investigated.The results showed that the introduction of heteroatoms did not destroy the mesostructure of KIT-6 with cubic Ia3d space group.La or ...展开更多
Rare earth permanent magnetic materials are typical electrical conductor, and their magnetic properties will decrease because of the eddy current effect, so it is difficult to keep them stable for a long enough time u...Rare earth permanent magnetic materials are typical electrical conductor, and their magnetic properties will decrease because of the eddy current effect, so it is difficult to keep them stable for a long enough time under a high frequency AC field. In the present study, as far as rare earth permanent magnets are concerned, for the first time, rare earth permanent magnets with strong electrical insulation and high magnetic performance have been obtained through experiments, and their properties are as follows： （i） Sm1 TM17 ： Br=0. 62 T, jHc=803.7 kA/m, （BH）m= 58.97 kJ/m^3, p=7 Ω· m; （2） NdFeB： Br=0.485 T, jHc=766.33 kA/m, （BH）m=37.96 kJ/m^3, ρ=Ω · m. The magnetic properties of Sm2TM17 and NdFeB are obviously higher than those of ferrite permanent magnet, and the electric insulating characteristics of Sm2TM17 and NdFeB applied have in fact been approximately the same as those of ferrite. Therefore, Sm2TM17 and NdFeB will possess the ability to take the place of ferrite under a certain high frequency AC electric field.展开更多
As a functional material,silver was employed as the electrical contact material in automotive electronics due to the excellent conductivity.However,this material was prone to the atmospheric corrosion,resulting in the...As a functional material,silver was employed as the electrical contact material in automotive electronics due to the excellent conductivity.However,this material was prone to the atmospheric corrosion,resulting in the damage of structure and failure of devices.In this study,the corrosion behavior of conductive silver applied in printed circuit board was explored,and it was found that the strongest environmental factors(SO2 pollutants,temperature and relative humidity(RH))influenced the structural damage of material on the viewpoints of kinetics and mechanism.Compared with other factors,temperature(55℃)was the dominating factor causing the structural change of conductive material under operation environments,and the corrosion product on the surface reached the maximum at the thickness of different corrosion product layer of dfilm=15.56910-5 lm.However,SO2 pollutants and RH accordingly increase the thickness of corrosion products(Ag2S and Ag_(2)SO_(4))during corrosion process,due to the promotion of the diffusion of corrosive species.Therefore,this study not only significantly reinforces the understanding of the structural damage of conductive material among the different environmental factors,but also provides an important guide to corrosion prevention design and materials selection in actual manufacturing.展开更多
1.Introduction Biodegradable polymeric biomaterials have been fabricated into various biomedical implants such as drug delivery nanoparticles,tissue engineering scaffolds and orthopedic devices.Using biodegradable pol...1.Introduction Biodegradable polymeric biomaterials have been fabricated into various biomedical implants such as drug delivery nanoparticles,tissue engineering scaffolds and orthopedic devices.Using biodegradable polymers as implant materials is beneficial as the implants are degraded and cleared by the body once their missions are complete,leaving no foreign materials in the body.Driven by the versatile needs in biomedical engineering,searching for ideal functional biodegradable polymers has been an endless effort in the past decades.Among biodegradable polymers,citrate-based biodegradable elastomeric(CABE)polymers have recently received increasing attention because their compliance under force can closely resemble the elastic展开更多
Nickel/cobalt-layered double hydroxides(Ni Co-LDH) have been attracted increasing interest in the applications of anode materials for lithium ion battery(LIB), but the low cycle stability and rate performance are stil...Nickel/cobalt-layered double hydroxides(Ni Co-LDH) have been attracted increasing interest in the applications of anode materials for lithium ion battery(LIB), but the low cycle stability and rate performance are still limited its practice applications. To achieve high performance LIB, the surface-confined strategy has been applied to design and fabricate a new anode material of NiCo-LDH nanosheet anchored on the surface of Ti3C2 MXene(Ni Co-LDH/Ti3C2). The ultra-thin, bended and wrinkled α-phase crystal with an interlayer spacing of 8.1 ? can arrange on the conductive substrates Ti3C2 MXene directly, resulting in high electrolyte diffusion ability and low internal resistance. Furthermore, chemical bond interactions between the highly conductive Ti3C2 MXene and Ni Co-LDH nanosheets can greatly increase the ion and electron transport and reduce the volume expansion of NiCo-LDH during Li ion intercalation. As expected,the discharge capacity of 562 m Ah g-1 at 5.0 A g-1 for 800 cycles without degradation can be achieved,rate capability and cycle performance are better than that of NiCo-LDH(~100 mAh g-1). Furthermore, the density function theory(DFT) calculations were performed to demonstrate that Ni Co-LDH/Ti3C2 system can be used as a highly desirable and promising anode material for lithium ion battery.展开更多
Optical grade diamond,in particular,high-end products,are mainly used for aerospace and defense purposes.How to manufacture them with higher quality and lower cost was critical technology.Systematic research on the pe...Optical grade diamond,in particular,high-end products,are mainly used for aerospace and defense purposes.How to manufacture them with higher quality and lower cost was critical technology.Systematic research on the performance of Self-designed plasma reactor with higher power for synthesizing diamond film was carried out.Microwave input power can reach up to 10 kW,the plasma reactor has good adaptability for the deviation of microwave frequency f at 2.45 GHz±20 MHz.The secondary plasma could be eliminated by adjusting the working gas pressure and the cylinder adjustment structure,it is helpful to improve the deposition rate with less energy loss.The concentrated and steady plasma could be obtained device with higher gas pressure and relative lower microwave input power.Gas supply modes and inlet gas flow rate were optimized,which would be beneficial to synthesize the film with good quality.展开更多
Marine biofouling seriously affects human marine exploitation and transportation activities,to which marine antifouling(AF)coatings are considered to be the most cost-effective solution.Since the mid-20th century,huma...Marine biofouling seriously affects human marine exploitation and transportation activities,to which marine antifouling(AF)coatings are considered to be the most cost-effective solution.Since the mid-20th century,human beings have dedicated their efforts on developing AF coatings with long cycle and high performance,leading to a large number of non-target organisms?distortion,death and marine environmental pollution.Polydimethylsiloxane(PDMS),is considered as one of the representative environment-friendly AF materials thanks to its non-toxic,hydrophobic,low surface energy and AF properties.However,PDMS AF coatings are prone to mechanical damage,weak adhesion strength to substrate,and poor static AF effect,which seriously restrict their use in the ocean.The rapid development of various nanomaterials provides an opportunity to enhance and improve the mechanical properties and antifouling properties of PDMS coating by embedding nanomaterials.Based on our research background and the problems faced in our laboratory,this article presents an overview of the current progress in the fields of PDMS composite coatings enhanced by different nanomaterials,with the discussion focused on the advantages and main bottlenecks currently encountered in this field.Finally,we propose an outlook,hoping to provide fundamental guidance for the development of marine AF field.展开更多
This paper discusses about the purity of strengthened pure platinum wire and the development method of platinum micro wire, in order to solve the difficulties of low tensile strength, easy to break, and low rate of mi...This paper discusses about the purity of strengthened pure platinum wire and the development method of platinum micro wire, in order to solve the difficulties of low tensile strength, easy to break, and low rate of micro wire. And it contrasts some performance of strengthened pure platinum wire and sponge Pt wire. The researches draw a conclusion that the thermoelectric properties of strengthened pure platinum micro wire was in accordance with national standards and satisfied users' requirements.展开更多
Active metamaterials incorporating with non-Foster elements have been considered as one of the means of overcoming inherent limitations of the passive counterparts, thus achieving broadband or gain metamaterials. Howe...Active metamaterials incorporating with non-Foster elements have been considered as one of the means of overcoming inherent limitations of the passive counterparts, thus achieving broadband or gain metamaterials. However, realistic active metamaterials, especially non-Foster loaded medium, would face the challenge of the possibility of instability. Moreover,they normally appear to be time-variant and in unsteady states, which leads to the necessity of a stability method to cope with the stability issue considering the system model uncertainty. In this paper, we propose an immittance-based stability method to design a non-Foster loaded metamaterial ensuring robust stability. First, the principle of this stability method is introduced after comparing different stability criteria. Based on the equivalent system model, the stability characterization is used to give the design specifications to achieve an active metamaterial with robust stability. Finally, it is applied to the practical design of active metamaterial with non-Foster loaded loop arrays. By introducing the disturbance into the nonFoster circuit（NFC）, the worst-case model uncertainty is considered during the design, and the reliability of our proposed method is verified. This method can also be applied to other realistic design of active metamaterials.展开更多
基金financially supported by the Key Research and Development Program of Ningbo(Grant No.2023Z098)Natural Science Foundation of Inner Mongolia(Grant No.2023MS05040)+1 种基金Shenyang Collaborative Innovation Center Project for Multiple Energy Fields Composite Processing of Special Materials(Grant No.JG210027)Shenyang Key Technology Special Project of The Open Competition Mechanism to Select the Best Solution(Grant Nos.2022210101000827,2022-0-43-048).
文摘Titanium alloy has the advantages of high strength,strong corrosion resistance,excellent high and low temperature mechanical properties,etc.,and is widely used in aerospace,shipbuilding,weapons and equipment,and other fields.In recent years,with the continuous increase in demand for medium-thick plate titanium alloys,corresponding welding technologies have also continued to develop.Therefore,this article reviews the research progress of deep penetration welding technology for medium-thick plate titanium alloys,mainly covering traditional arc welding,high-energy beam welding,and other welding technologies.Among many methods,narrow gap welding,hybrid welding,and external energy field assistance welding all contribute to improving the welding efficiency and quality of medium-thick plate titanium alloys.Finally,the development trend of deep penetration welding technology for mediumthick plate titanium alloys is prospected.
基金Natural Science Foundation of Hubei Province(2024AFB432)National Natural Science Foundation of China(52171045,12302436,52302095)Research Fund of Jianghan University(2023JCYJ05)。
文摘Based on simplified calculations of one-dimensional wave systems,loading pressure platform curves of Al-Cu gradient materials(GMs)impactor were designed.The Al-Cu GMs were prepared using tape-pressing sintering,and their acoustic properties were characterized to match the design path.The parallelism of the Al-Cu GM was confirmed using a three-dimensional surface profilometry machine.A one-stage light-gas gun was used to launch the Al-Cu GM,impacting an Al-LiF target at a velocity of 400 m/s.The results of the experimental strain rate demonstrate that the Al-Cu GMs can realize the precise control of the strain rate within the range of 10^(4)‒10^(5)/s in the high-speed impact experiments.
基金supported by the Fundamental Research Funds for the Central Universities of Central South University,China(No.2022XQLH046)the Technical Area Fund of Foundation Strengthening,China(No.2022-JCJQ-ZD-174-00-20)National Defense Basic Scientific Research Projects,China,and Central South University−Zijin Mining Technical Cooperation Development Project,China.
文摘To improve the slow kinetics and poor mechanical strength of aqueous silver peroxide−aluminum(AgO−Al)battery cathode materials,the effects of different binders including polytetrafluoroethylene(PTFE)and polyvinylpyrrolidone(PVP)on the AgO cathode material were investigated.The samples were characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),cyclic voltammetry(CV),electrochemical impedance spectrum(EIS),and galvanostatic discharge.In contrast to the pure AgO and AgO−PTFE electrodes,the results demonstrated that the PVP effectively bound the electrode materials together.The prepared AgO−PVP as the cathode material of AgO−Al batteries could improve the battery capacity,exhibiting a high specific capacity(389.95 mA·h/g at 500 mA/cm^(2)),a high operating voltage(1.75 V at 500 mA/cm^(2)),a maximum energy density(665.65 W·h/kg),and a maximum power density(5236 W/kg).Furthermore,the electrochemical mechanism of the AgO−PVP cathode material was examined,revealing that the electrode exhibited rapid ion diffusion and effective interfacial ion/electron transport.
基金supported by the National Natural Science Foundation of China(Nos.52102291,52271011,and 51701142)supported by a grant from the Cangzhou Institute of Tiangong University(No.TGCYY-F-0201)。
文摘Sodium metal has been widely studied in the field of batteries due to its high theoretical specific capacity(~1,166 m Ah/g),low redox potential(-2.71 V compared to standard hydrogen electrode),and lowcost advantages.However,problems such as unstable solid electrolyte interface(SEI),uncontrolled dendrite growth,and side reactions between solid-liquid interfaces have hindered the practical application of sodium metal anodes(SMAs).Currently,lots of strategies have been developed to achieve stabilized sodium metal anodes.Among these strategies,modified metal current collectors(MCCs)stand out due to their unique role in accommodating volumetric fluctuations with superior structure,lowering the energy barrier for sodium nucleation,and providing guided uniform sodium deposition.In this review,we first introduced three common metal-based current collectors applied to SMAs.Then,we summarized strategies to improve sodium deposition behavior by optimally engineering the surface of MCCs,including surface loading,surface structural design,and surface engineering for functional modification.We have followed the latest research progress and summarized surface optimization cases on different MCCs and their applications in battery systems.
基金supported as part of The Center for LignoCellulose Structure and Formation,an Energy Frontier Research Center funded by the U.S.Department of Energy,Office of Science,Basic Energy Sciences under Award#DE-SC0001090support from the Huck Institutes of the Life Sciences at Penn State University through the Patricia and Stephen Benkovic Research Initiativesupported by the Center for Engineering Mechano Biology(CEMB),an NSF Science and Technology Center,under grant agreement CMMI:15-48571。
文摘Plant cell wall(CW)-like soft materials,referred to as artificial CWs,are composites of assembled polymers containing micro-/nanoparticles or fibers/fibrils that are designed to mimic the composition,structure,and mechanics of plant CWs.CW-like materials have recently emerged to test hypotheses pertaining to the intricate structure–property relationships of native plant CWs or to fabricate functional materials.Here,research on plant CWs and CW-like materials is reviewed by distilling key studies on biomimetic composites primarily composed of plant polysaccharides,including cellulose,pectin,and hemicellulose,as well as organic polymers like lignin.Micro-and nanofabrication of plant CW-like composites,characterization techniques,and in silico studies are reviewed,with a brief overview of current and potential applications.Micro-/nanofabrication approaches include bacterial growth and impregnation,layer-by-layer assembly,film casting,3-dimensional templating microcapsules,and particle coating.Various characterization techniques are necessary for the comprehensive mechanical,chemical,morphological,and structural analyses of plant CWs and CW-like materials.CW-like materials demonstrate versatility in real-life applications,including biomass conversion,pulp and paper,food science,construction,catalysis,and reaction engineering.This review seeks to facilitate the rational design and thorough characterization of plant CW-mimetic materials,with the goal of advancing the development of innovative soft materials and elucidating the complex structure–property relationships inherent in native CWs.
基金financially supported by the National Natural Science Foundation of China(No.52475347)the National Program of Foreign Experts of China(No.G2023026003L)+3 种基金the High-end Foreign Experts Introduction Project of Henan Province,China(No.HNGD2025026)Project supported by the Program for the Top Young Talents of Henan Province,China,Project(No.242102521057)sponsored by the International Science and Technology Cooperation Project of Henan Province,China,and projects supported by China Postdoctoral Foundation(No.2023M740475)Henan Provincial Science and Technology R&D Joint Fund(Industry)(No.225101610002).
文摘In recent years,superhard coatings have emerged as a focal point in metal material research due to their innovative design strategies and exceptional mechanical properties.They are widely utilized in industries such as shielding,oil extraction,and coal mining.However,in practical applications,tools often suffer from wear,fractures,plastic deformation,and other types of failure,directly impacting machining efficiency,costs,and product quality.To mitigate these challenges,the selection of appropriate tool materials and preparation methods is critical to ensure sustained production efficiency.Therefore,it is essential to identify and develop coating materials with superior performance.Recent advancements in superhard coatings are reviewed comprehensively;preparation methods are discussed for superhard tools;diamond coatings,diamond-like carbon coatings,cubic boron nitride coatings and graphite carbon nitride coatings are examined specifically.It analyzes their microstructures,phase transformation processes,mechanical properties,and formation mechanisms,while also evaluating properties such as wear resistance,corrosion resistance,and high hardness.The applicability of existing theoretical models is verified and new frameworks for future superhard coating designs are proposed.Moreover,the current research limitations in tool coatings are identified and directions for future research and development are proposed.
基金Funded by the Natural Science and Engineering Technology in Qinghai Province(2023)the Qinghai Province"Kunlun Talents"High End Innovation and Entrepreneurship Talent Project(2023)+4 种基金the Western Young Scholars Program of Chinese Academy of Sciences(2024,No.2022000018)the National Natural Science Foundation of China(N0.52404189)the Open Fund of Key Laboratory of Green and High-end Utilization of Salt Lake Resources(No.ISL2024-15)the Xining Major Science and Technology Innovation Platform Project(No.2024-Z-01)the Independent Deployment Project of the Qinghai Salt Lake Research Institute,CAS(No.E455HX3501)。
文摘In this essay,by summarizing the research progress and achievements of various scholars at home and abroad in recent years on the material properties and corrosion resistance of magnesium phosphate cement(MPC),we review the factors influencing on the properties of MPC,and analyze the effects of raw materials,retarders,and admixtures on the properties of MPC.Two different hydration mechanisms of MPC are discussed,and finally the research progress of MPC in the field of anti-corrosion coatings for steel and ordinary concrete(OPC)is highlighted,and suggestions and prospects are given.
基金supported by the National Natural Science Foundation of China(Nos.52125405 and U22A20108)Thailand Science Research and Innovation Fund Chulalongkorn University,National Research Council of Thailand(NRCT)+1 种基金Chulalongkorn University(No.42A660383)the Hub of Talents:Sustainable Materials for Circular Economy,National Research Council of Thailand(NRCT).
文摘LithiumvanadatesLiV_(3)O_(8)-LiV_(6)O_(15)(LVO)witha heterojunction structure are synthesized using a conventional high-temperature solid-state method to address the challenges of low ionic conductivity,rapid capacity decay,and poor cycling performance in conventional lithium-ion battery cathode materials.The charge-discharge processes of LVO span multiple platforms,delivering an impressive specific discharge capacity of 219.4 mAh.g^(-1) at 1C.Remarkably,LVO exhibits a high-capacity retention rate of 81.3%after 800 cycles within the typical operating voltage range of lithium-ion batteries(2.8-4.3V).Rate capability tests and electrochemical impedance spectroscopy(EIS)reveal that,compared to traditional cathode materials,LVO significantly enhances Li*diffusion rates(D_(Li*))and reduces charge transfer resistance(Ret).
基金funding from SFB 1415 subproject B04(Deutsche Forschungsgemeinschaft,No.417590517)supported by the Deutsche Forschungsgemeinschaft through the Würzburg-Dresden Cluster of Excellence on Complexity and Topology in Quantum Matter-ct.qmat(EXC 2147,No.390858490)the support provided by the DRESDEN-concept alliance of research institutions.
文摘Twisted multilayers of two-dimensional materials attract widespread research interest due to their intriguing electronic and optical properties related to their chiral symmetry breaking and moiréeffects.The two-dimensional transition metal dichalcogenide MoSe_(2) is a particularly promising material for twisted multilayers,capable of sustaining moiréexcitons.Here,we report on a rational bottomup synthesis approach for twisted MoSe_(2) flakes by chemical vapor transport(CVT).Screw dislocation-driven growth was forced by surface-fused SiO_(2)nanoparticles on the substrates that serve as potential nucleation points in low supersaturation condition.Thus,crystal growth by in-situ CVT under addition of MoCl_(5) leads to bulk 2H-MoSe_(2) in a temperature gradient from 900 to 820℃ with a dwell time of 96 h.Hexagonally shaped 2H-MoSe_(2) flakes were grown from 710 to 685℃ with a dwell time of 30 min on SiO_(2)@Al_(2)O_(3)(0001)substrates.Electron backscatter diffraction as well as electron microscopy reveals the screw dislocation-driven growth of triangular 3R-MoSe_(2) with individual step heights between 0.9 and 2.9 nm on SiO_(2)@Si(100)under the same conditions.Finally,twisted MoSe_(2) flakes exhibiting a twist angle of 19°with respect to the[010]zone axis could be synthesized.
基金Funded by the Major State Basic Research Development Program of China('973'Project,2001CB610705)
文摘Effects of calcined coal gangue （CG） aggregates treated by the surface thermal activation on the flowability and strength, and paste-CG aggregate interfaces of the cement-based material were investigated. The experimental results show that the compressive and flexural strength of the cement-based material with the calcined CG aggregates is much higher than that of the material with the natural CG aggregates, but the flowability of the material with calcined CG is significantly reduced with the calcined time. The strength of the material with the calcined CG aggregates only increases little with the calcined time at the same w/c ratio, but is reduced with the calcined time at the same flowability. The CG aggregates calcined by the surface thermal activation obviously overcomes the disadvantages of fully calcined CG.
基金Project supported by the National Basic Research Program of China (2004CB719500)the Commission of Science and Technology of Shanghai Municipality (03DJ14006)
文摘Using cetyl-trimethyl-ammonium bromide （CTMAB） as the template agent and tetraethylorthosilicate （TEOS） as the silica source, the MCM-41 mesoporous materials were synthesized with La or Ce incorporated in the framework under hydrothermal conditions. The structure and the state of La or Ce were investigated through the analyses of XRD, nitrogen adsorption-desorption, FT-IR, and UV-Vis. XRD and N2 adsorption-desorption results showed that Ln-MCM-41 exhibited the loss of the lattice ordering of the MCM-41 construct, and larger unit cell parameter and pore diameter than pure silica MCM-41. The FT-IR and UV-Vis results indicated the presence of isolated tetra-coordinated La or Ce ions in the framework and other Ln species dispersed highly on the Ln-MCM-41 surface simultaneously. Furthermore, their catalytic behaviors in the oxidation of styrene were studied using H2O2 as the oxidant. The La-MCM-41 catalysts exhibited high reactivity and the reactivity increased with the increase of the La content in the La-MCM-41 samples. On the contrary, Ce-MCM-41 catalysts showed low reactivity in the oxidation of styrene and the conversion of styrene decreased with the increase of the Ce content in the Ce-MCM-41 samples.
基金supported by the National Basic Research Program of China (2010CB732300)Education Commission of Shanghai Municipality (2008CG35)Science and Technology Commission of Shanghai Municipality (09ZR1408200)
文摘La-doped and La-B-doped KIT-6 mesoporous materials were prepared by direct hydrothermal synthesis with pH-adjusting method and characterized by X-ray diffractometer(XRD),nitrogen sorption,FT-IR,UV-Vis,X-ray photoelectron spectroscopy(XPS) and ICP-AES.The catalytic performance for the oxidation of styrene by hydrogen peroxide,tert-butyl hydroperoxide or oxygen was investigated.The results showed that the introduction of heteroatoms did not destroy the mesostructure of KIT-6 with cubic Ia3d space group.La or ...
基金Item Sponsored by Liaoning Provincial Natural Science Foundation (20071090)
文摘Rare earth permanent magnetic materials are typical electrical conductor, and their magnetic properties will decrease because of the eddy current effect, so it is difficult to keep them stable for a long enough time under a high frequency AC field. In the present study, as far as rare earth permanent magnets are concerned, for the first time, rare earth permanent magnets with strong electrical insulation and high magnetic performance have been obtained through experiments, and their properties are as follows： （i） Sm1 TM17 ： Br=0. 62 T, jHc=803.7 kA/m, （BH）m= 58.97 kJ/m^3, p=7 Ω· m; （2） NdFeB： Br=0.485 T, jHc=766.33 kA/m, （BH）m=37.96 kJ/m^3, ρ=Ω · m. The magnetic properties of Sm2TM17 and NdFeB are obviously higher than those of ferrite permanent magnet, and the electric insulating characteristics of Sm2TM17 and NdFeB applied have in fact been approximately the same as those of ferrite. Therefore, Sm2TM17 and NdFeB will possess the ability to take the place of ferrite under a certain high frequency AC electric field.
基金This study was financially supported by the National Natural Science Foundation of China(Nos.61975070,51902143,61971207 and 61775088)the Key Research and Development Project of Jiangsu Province(Nos.BE2018062 and BE2019033)+5 种基金the Natural Science Foundation of Jiangsu Province(No.BK20191467)the Postgraduae Research&Practice Innovation Program of Jiangsu Province(No.SJCX20_0922)the International S&T Cooperation Program of Jiangsu Province(Nos.BZ2019063,BZ2020045 and BZ2020030)the Natural Science Foundation of Jiangsu Higher Education Institutes of China(Nos.19KJB430018 and 20KJA430003)the Special Project for Technology Innovation of Xuzhou City(Nos.KC19250,KC20201 and KC20244)the Open Project of State Key Laboratory of Advanced Materials and Electronic Components(No.FHR-JS-202011017).
文摘As a functional material,silver was employed as the electrical contact material in automotive electronics due to the excellent conductivity.However,this material was prone to the atmospheric corrosion,resulting in the damage of structure and failure of devices.In this study,the corrosion behavior of conductive silver applied in printed circuit board was explored,and it was found that the strongest environmental factors(SO2 pollutants,temperature and relative humidity(RH))influenced the structural damage of material on the viewpoints of kinetics and mechanism.Compared with other factors,temperature(55℃)was the dominating factor causing the structural change of conductive material under operation environments,and the corrosion product on the surface reached the maximum at the thickness of different corrosion product layer of dfilm=15.56910-5 lm.However,SO2 pollutants and RH accordingly increase the thickness of corrosion products(Ag2S and Ag_(2)SO_(4))during corrosion process,due to the promotion of the diffusion of corrosive species.Therefore,this study not only significantly reinforces the understanding of the structural damage of conductive material among the different environmental factors,but also provides an important guide to corrosion prevention design and materials selection in actual manufacturing.
基金supported in part by a NSF CAREER award(1313553)a NIH R01 award (EB012575)+2 种基金a NSF collaborative research award(1266116)a CPRIT High Impact/High Risk Research Award(RP110412)a research award from National Natural Sciences Foundation of China(31228007)
文摘1.Introduction Biodegradable polymeric biomaterials have been fabricated into various biomedical implants such as drug delivery nanoparticles,tissue engineering scaffolds and orthopedic devices.Using biodegradable polymers as implant materials is beneficial as the implants are degraded and cleared by the body once their missions are complete,leaving no foreign materials in the body.Driven by the versatile needs in biomedical engineering,searching for ideal functional biodegradable polymers has been an endless effort in the past decades.Among biodegradable polymers,citrate-based biodegradable elastomeric(CABE)polymers have recently received increasing attention because their compliance under force can closely resemble the elastic
基金Rachadapisek Sompoch project,Chulalongkorn University(CU_GR_62_14_62_02)the Energy Conservation and Promotion Fund Office,Ministry of Energy+2 种基金the NSFC(grant 51421091)National Science Foundation for Distinguished Young Scholars for Hebei Province of China(grant E2016203376)Asahi Glass Foundation。
文摘Nickel/cobalt-layered double hydroxides(Ni Co-LDH) have been attracted increasing interest in the applications of anode materials for lithium ion battery(LIB), but the low cycle stability and rate performance are still limited its practice applications. To achieve high performance LIB, the surface-confined strategy has been applied to design and fabricate a new anode material of NiCo-LDH nanosheet anchored on the surface of Ti3C2 MXene(Ni Co-LDH/Ti3C2). The ultra-thin, bended and wrinkled α-phase crystal with an interlayer spacing of 8.1 ? can arrange on the conductive substrates Ti3C2 MXene directly, resulting in high electrolyte diffusion ability and low internal resistance. Furthermore, chemical bond interactions between the highly conductive Ti3C2 MXene and Ni Co-LDH nanosheets can greatly increase the ion and electron transport and reduce the volume expansion of NiCo-LDH during Li ion intercalation. As expected,the discharge capacity of 562 m Ah g-1 at 5.0 A g-1 for 800 cycles without degradation can be achieved,rate capability and cycle performance are better than that of NiCo-LDH(~100 mAh g-1). Furthermore, the density function theory(DFT) calculations were performed to demonstrate that Ni Co-LDH/Ti3C2 system can be used as a highly desirable and promising anode material for lithium ion battery.
基金funded by the Inner Mongolia Natural Science Foundation under Grant No.2017MS0539
文摘Optical grade diamond,in particular,high-end products,are mainly used for aerospace and defense purposes.How to manufacture them with higher quality and lower cost was critical technology.Systematic research on the performance of Self-designed plasma reactor with higher power for synthesizing diamond film was carried out.Microwave input power can reach up to 10 kW,the plasma reactor has good adaptability for the deviation of microwave frequency f at 2.45 GHz±20 MHz.The secondary plasma could be eliminated by adjusting the working gas pressure and the cylinder adjustment structure,it is helpful to improve the deposition rate with less energy loss.The concentrated and steady plasma could be obtained device with higher gas pressure and relative lower microwave input power.Gas supply modes and inlet gas flow rate were optimized,which would be beneficial to synthesize the film with good quality.
基金financially supported by National Natural Science Foundation of China(Grant No.52073071,51803041)Natural Science Funding for Excellent Young Scholar of Heilongjiang Province(YQ2022E021,L.Wang)+2 种基金the Fundamental Research Funds for the Central Universities(HIT.DZJJ.2023056)the Research Fund of State Key Laboratory for Marine Corrosion and Protection of Luoyang Ship Material Research Institute(No.JS220407)the financial support from the Spanish Ministry of Economy and the Canary Islands program Vieray Clavijo Senior(Ref.2023/00001156)。
文摘Marine biofouling seriously affects human marine exploitation and transportation activities,to which marine antifouling(AF)coatings are considered to be the most cost-effective solution.Since the mid-20th century,human beings have dedicated their efforts on developing AF coatings with long cycle and high performance,leading to a large number of non-target organisms?distortion,death and marine environmental pollution.Polydimethylsiloxane(PDMS),is considered as one of the representative environment-friendly AF materials thanks to its non-toxic,hydrophobic,low surface energy and AF properties.However,PDMS AF coatings are prone to mechanical damage,weak adhesion strength to substrate,and poor static AF effect,which seriously restrict their use in the ocean.The rapid development of various nanomaterials provides an opportunity to enhance and improve the mechanical properties and antifouling properties of PDMS coating by embedding nanomaterials.Based on our research background and the problems faced in our laboratory,this article presents an overview of the current progress in the fields of PDMS composite coatings enhanced by different nanomaterials,with the discussion focused on the advantages and main bottlenecks currently encountered in this field.Finally,we propose an outlook,hoping to provide fundamental guidance for the development of marine AF field.
文摘This paper discusses about the purity of strengthened pure platinum wire and the development method of platinum micro wire, in order to solve the difficulties of low tensile strength, easy to break, and low rate of micro wire. And it contrasts some performance of strengthened pure platinum wire and sponge Pt wire. The researches draw a conclusion that the thermoelectric properties of strengthened pure platinum micro wire was in accordance with national standards and satisfied users' requirements.
基金Project supported by the National Natural Science Foundation of China(Grant No.61701349)the Natural Science Foundation of Shandong Province,China(Grant Nos.ZR2017QF012 and ZR2017MF042)the Program for the Top Young Innovative Talents,China(Grant No.Q1313-03)
文摘Active metamaterials incorporating with non-Foster elements have been considered as one of the means of overcoming inherent limitations of the passive counterparts, thus achieving broadband or gain metamaterials. However, realistic active metamaterials, especially non-Foster loaded medium, would face the challenge of the possibility of instability. Moreover,they normally appear to be time-variant and in unsteady states, which leads to the necessity of a stability method to cope with the stability issue considering the system model uncertainty. In this paper, we propose an immittance-based stability method to design a non-Foster loaded metamaterial ensuring robust stability. First, the principle of this stability method is introduced after comparing different stability criteria. Based on the equivalent system model, the stability characterization is used to give the design specifications to achieve an active metamaterial with robust stability. Finally, it is applied to the practical design of active metamaterial with non-Foster loaded loop arrays. By introducing the disturbance into the nonFoster circuit（NFC）, the worst-case model uncertainty is considered during the design, and the reliability of our proposed method is verified. This method can also be applied to other realistic design of active metamaterials.
