Heat treatments play a crucial role in enhancing the mechanical properties of AZ91 Mg alloy by dissolving coarse phases during solution treatment and promoting precipitation during aging.However,non-uniform microstruc...Heat treatments play a crucial role in enhancing the mechanical properties of AZ91 Mg alloy by dissolving coarse phases during solution treatment and promoting precipitation during aging.However,non-uniform microstructures and coarse secondary phases in conventional casting methods hinder the effectiveness of these treatments,leading to reduced ductility,inconsistent properties,and prolonged durations.To overcome these challenges,this study introduces the Strain Integrated Gas-Infusion(SIGI)casting process that integrates strain and gas infusion in the semi-solid state.The impact of the SIGI process on the solution treatment and aging kinetics of AZ91 Mg alloy is explored.The SIGI process refinesα-Mg andβ-Mg_(17)Al_(12)phases,significantly enhancing mechanical properties.Experimental and quantitative analyses reveal that the SIGI process accelerates solute atom dissolution,reducing solution treatment times by half,and promotes faster nucleation and growth of precipitates during aging,shortening aging times by one-third.These improvements result in substantial gains in ultimate tensile strength(~40-50%)and ductility(~20-30%)after age hardening compared to conventional casting.The mechanisms driving these changes,including enhanced nucleation rates,reduced diffusion distances,and microstructural refinement,are discussed.These findings demonstrate the potential of the SIGI casting process to advance magnesium alloy performance for engineering applications.展开更多
The Mg-Y-Zn magnesium alloy system is known for the presence of Long-Period Stacking Ordered(LPSO)phases that improves strength and ductility with minimal amounts of alloying elements.Even better improvements are asso...The Mg-Y-Zn magnesium alloy system is known for the presence of Long-Period Stacking Ordered(LPSO)phases that improves strength and ductility with minimal amounts of alloying elements.Even better improvements are associated with the specific microstructure known as the Mille-Feuille(MF)structure that can occur in this alloy as well after proper heat treatment.This study systematically compares the traditional ingot metallurgy method with the Bridgman method(slow cooling),coupled with diverse heat treatments and extrusion process.Microscopic analyses reveal variations in the presence of LPSO phases,MF structure,and especially grain size,leading to divergent mechanical and corrosion properties.The Bridgman approach surprisingly stands out,ensuring superior mechanical properties due to kink and texture strengthening.展开更多
Realising the potential of Magnesium(Mg),several globally leading ventures have invested in the Mg industry,but their relatively poor corrosion resistance is a never ending saga till date.The corrosion and bio-corrosi...Realising the potential of Magnesium(Mg),several globally leading ventures have invested in the Mg industry,but their relatively poor corrosion resistance is a never ending saga till date.The corrosion and bio-corrosion behaviour of Mg has gained research attention and still remains a hot topic in the application of automobile,aerospace and biomedical industries.The intrinsic high electrochemical nature of Mg limits their utilization in diverse application.This scenario has prompted the development of Mg composites with an aim to achieve superior corrosion and bio-corrosion resistance.The present review enlightens the influence of grain size(GS),secondary phase,texture,type of matrix and reinforcement on the corrosion and bio-corrosion behaviour of Mg composites.Firstly,the corrosion and bio-corrosion behaviour of Mg composites manufactured by primary and secondary processing routes are elucidated.Secondly,the comprehensive corrosion and bio-corrosion mechanisms of these Mg composites are proposed.Thirdly,the individual role of GS,texture and corrosive medium on corrosion and bio-corrosion behaviour of Mg composites are clarified and revealed.The challenges encountered,unanswered issues in this field are explained in detail and accordingly the scope for future research is framed.The review is presented from basic concrete background to advanced corrosion mechanisms with an aim of creating interest among the readers like students,researchers and industry experts from various research backgrounds.Indeed,the corrosion and bio-corrosion behaviour of Mg composites are critically reviewed for the first time to:(i)contribute to the body of knowledge,(ii)foster research and development,(iii)make breakthrough,and(iv)create life changing innovations in the field of Mg composite corrosion.展开更多
In this study,the effect of annealing on the microstructure and following corrosion and biological properties of Mg-1.0Ca-0.5Zn-0.1Y-0.03Mn(at.%)alloy prepared by rapid solidified powder metallurgy was investigated.Th...In this study,the effect of annealing on the microstructure and following corrosion and biological properties of Mg-1.0Ca-0.5Zn-0.1Y-0.03Mn(at.%)alloy prepared by rapid solidified powder metallurgy was investigated.The annealing at 300℃ for 2 h did not change the grain size significantly;however,a slight growth of Mg_(2)Ca precipitates was observed.When the annealing temperature increased up to 400℃ for 2 h,full recrystallization of the alloy occurred;the grains and precipitates grew noticeably.Those changes were responsible for decreasing the corrosion and the tribocorrosion resistance of the alloy.Due to lowered resistance to the corrosion medium,the cell viability was also reduced.Although MG63 cells on the annealed specimens developed filopodia,cell-to-cell communication was not observed.展开更多
Dilute Mg alloys processed by the rapidly solidified ribbon consolidation(RSRC)technique are candidate materials for structural applications due to their enhanced mechanical performance.The thermal stability of the st...Dilute Mg alloys processed by the rapidly solidified ribbon consolidation(RSRC)technique are candidate materials for structural applications due to their enhanced mechanical performance.The thermal stability of the structure in these alloys strongly influences their mechanical performance at elevated temperatures.In this study,an RSRC-processed Mg-1%Ca-0.5%Zn-0.1%Y-0.03%Mn(at%)alloy was heated at a constant rate up to 833 K,and concurrently in situ X-ray diffraction(XRD)measurements were performed using synchrotron radiation in order to monitor the changes in the structure.In addition,ex situ electron microscopy investigations were carried out before and after annealing to complete the XRD study.On the basis of XRD results,the stages of the microstructure evolution during heating were identified.In addition,the thermal expansion coefficients of the matrix and the Mg_(2)Ca secondary phase were determined.Between 299 and 400 K,the lattice constants of both the matrix and the Mg_(2)Ca phase increased due to thermal expansion.In the temperature range of 400-673 K,the increase of the lattice constants with increasing the temperature continued,but their rate was different for the two phases which can induce thermal stresses.Between 673 and 753 K,the lattice constants of the secondary phase did not change most probably due to the compensating effects of the thermal expansion and the decrease of the Ca content.In the temperature range of 753-793 K,the Mg_(2)Ca phase started to dissolve.Between 793 and 833 K the dissolution continued,and additionally the matrix was partially melted.展开更多
Magnesium alloys are best known for their light weight and high strength-to-weight ratio.In the forging process of magnesium alloys,hot working of has been often carried out.However,the strength of the material is red...Magnesium alloys are best known for their light weight and high strength-to-weight ratio.In the forging process of magnesium alloys,hot working of has been often carried out.However,the strength of the material is reduced because the material temperature reaches the recrystallization temperature during hot working.Therefore,the cold method working is required to maintain or increase the strength of a material.In this study,we have designed experimental equipment to examine whether the forming of magnesium alloy is possible in the cold working by utilizing underwater shock wave,and the hardness of the material changes by receiving the underwater shock wave.Experimental results revealed increase in coefficient of extension and hardness of materials after receiving a shock wave.展开更多
The fracture toughness of extruded Mg-1Zn-2Y(at.%)alloys,featuring a multimodal microstructure containing fine dynamically recrystallized(DRXed)grains with random crystallographic orientation and coarse-worked grains ...The fracture toughness of extruded Mg-1Zn-2Y(at.%)alloys,featuring a multimodal microstructure containing fine dynamically recrystallized(DRXed)grains with random crystallographic orientation and coarse-worked grains with a strong fiber texture,was investigated.The DRXed grains comprised randomly oriented equiaxedα-Mg grains.In contrast,the worked grains includedα-Mg and long-period stacking ordered(LPSO)phases that extended in the extrusion direction(ED).Both types displayed a strong texture,aligning the(10.10)direction parallel to the ED.The volume fractions of the DRXed and worked grains were controlled by adjusting the extrusion temperature.In the longitudinal-transverse(L-T)orientation,where the loading direction was aligned parallel to the ED,there was a tendency for the conditional fracture toughness,KQ,tended to increase as the volume fraction of the worked grains increased.However,the KQ values in the T-L orientation,where the loading direction was perpendicular to the ED,decreased with an increase in the volume fraction of the worked grains.This suggests strong anisotropy in the fracture toughness of the specimen with a high volume fraction of the worked grains,relative to the test direction.The worked grains,which included the LPSO phase and were elongated perpendicular to the initial crack plane,suppressed the straight crack extension,causing crack deflection,and generating secondary cracks.Thus,these worked grains significantly contributed to the fracture toughness of the extruded Mg-1Zn-2Y alloys in the L-T orientation.展开更多
Mg-Y-Zn-Al alloys processed by rapidly solidified ribbon consolidation(RSRC)technique exhibit an exceptional mechanical performance indicating promising application potential.This material has a bimodal microstructure...Mg-Y-Zn-Al alloys processed by rapidly solidified ribbon consolidation(RSRC)technique exhibit an exceptional mechanical performance indicating promising application potential.This material has a bimodal microstructure consisting of fine recrystallized and coarse non-recrystallized grains with solute-rich stacking faults forming cluster arranged layers(CALs)and nanoplates(CANaPs),or complete long period stacking ordered(LPSO)phase.In order to reveal the deformation mechanisms,in-situ synchrotron X-ray diffraction line profile analysis was employed for a detailed study of the dislocation arrangement created during tension in Mg-0.9%Zn-2.05%Y-0.15%Al(at%)alloy.For uncovering the effect of the initial microstructure on the mechanical performance,additional samples were obtained by annealing of the as-consolidated specimen at 300 and 400℃ for 2 h.The heat treatment at 300℃ had no significant effect on the initial microstructure,its evolution during tension and,thus,the overall deformation behavior under tensile loading.On the other hand,annealing at 400℃ resulted in a significant increase of the recrystallized grains fraction and a decrease of the dislocation density,leading to only minor degradation of the mechanical strength.The maximum dislocation density at the failure of the samples corresponding to the plastic strain of 10-25% was estimated to be about 16-20×10^(14)m^(-2).The diffraction profile analysis indicated that most dislocations formed during tension were of non-basal and pyramidal types,what was also in agreement with the Schmid factor values revealed independently from orientation maps.It was also shown that the dislocation-induced Taylor hardening was much lower below the plastic strain of 3% than above this value,which was explained by a model of the interaction between prismatic dislocations and CANaPs/LPSO plates.展开更多
This study aims to investigate the extrusion temperature effects on the development of heterogeneous microstructures and mechanical properties,focusing on their impact on the fracture toughness of AZ31B alloys.Magnesi...This study aims to investigate the extrusion temperature effects on the development of heterogeneous microstructures and mechanical properties,focusing on their impact on the fracture toughness of AZ31B alloys.Magnesium AZ31B(Mg-3wt%Al-1wt%Zn)alloys with high strength and reasonable fracture toughness,featuring heterogeneous microstructures,were fabricated via warm/hot extrusion at temperatures ranging from 523 to 723 K.The AZ31B alloy extruded at 523 K was bimodally grained into coarse worked grains with high Kernel average misorientation(KAM)values and fine dynamically recrystallized(DRXed)grains(<10μm)with intermediate KAM values.The 523 K-extruded alloy exhibited a high tensile yield strength of∼280 MPa and fracture toughness KJIC of∼26 MPa·m^(1/2).Conversely,the 723 K-extruded AZ31B alloy was trimodally grained into a small amount of worked grains,fine DRXed grains,and coarse DRXed grains(>10μm)with low KAM values.The 723 K-extruded alloy exhibited low tensile yield strength but a high KJIC value of∼36 MPa·m^(1/2)owing to the high energy dissipation for crack extension in the coarse DRXed grains.展开更多
Mg_(97)Zn_(1)Y_(2)alloys with high ignition temperatures were developed by adding Sr.The addition of Sr resulted in the formation of a uniform and thin Y_(2)O_(3)film.Mg–Zn–Y alloys containing at least 0.25 at.%Sr e...Mg_(97)Zn_(1)Y_(2)alloys with high ignition temperatures were developed by adding Sr.The addition of Sr resulted in the formation of a uniform and thin Y_(2)O_(3)film.Mg–Zn–Y alloys containing at least 0.25 at.%Sr exhibited ignition temperatures of 1270–1320 K.As a result of EDS measurement,Sr was found to be concentrated in the Y_(2)O_(3)film.In addition,a mixed film of MgO and Sr O formed on the outer layer in the 1.5 at.%Sr-containing Mg_(97)Zn_(1)Y_(2)alloy.These findings suggest that the uniform and thin Y_(2)O_(3)film that maintains high soundness at high temperatures was formed owing to valence control and the formation of a protective outer oxide film.展开更多
The Mg-Y-Zn magnesium alloy system is commonly recognized for its remarkable combination of high strength and ductility,achieved even with minimal amounts of alloying elements.This exceptional performance is attribute...The Mg-Y-Zn magnesium alloy system is commonly recognized for its remarkable combination of high strength and ductility,achieved even with minimal amounts of alloying elements.This exceptional performance is attributed to its unique microstructure,which includes Long-Period Stacking Ordered(LPSO)phases or the distinctive microstructure derived from the LPSO phase,referred to as the Mille-Feuille structure(MFS).This study systematically compares the traditional ingot metallurgy method with the rapid solidification technique,coupled with diverse heat treatments and extrusion processes.Microscopic analyses reveal variations in the presence of LPSO phases,Mille-Feuille structure,and grain size,leading to divergent mechanical and corrosion properties.The rapid solidification approach stands out,ensuring superior mechanical properties alongside a reasonable corrosion rate.展开更多
The compressive deformation behavior of the extruded WZ42(Mg98.5Y1Zn0.5 in at.%)magnesium alloy containing a low amount of long-period stacking ordered(LPSO)phase was studied by in-situ synchrotron radiation diffracti...The compressive deformation behavior of the extruded WZ42(Mg98.5Y1Zn0.5 in at.%)magnesium alloy containing a low amount of long-period stacking ordered(LPSO)phase was studied by in-situ synchrotron radiation diffraction technique.Tests were conducted at temperatures between room temperature and 350℃.Detailed microstructure investigation was provided by scanning electron microscopy,particularly the backscattered electron imaging and electron backscatter diffraction technique.The results show that twinning lost its dominance and kinking of the LPSO phase became more pronounced with increasing deformation temperature.No cracks of the LPSO phase and no debonding r at the interface between the LPSO phase and the Mg matrix were observed at temperatures above 200℃.At 350℃,the LPSO phase lost its strengthening effect and the deformation of the alloy was mainly realized by the dynamic recrystallization of the Mg matrix.展开更多
The mechanisms of multimodal microstructure evolution and the effects of microstructural factors on mechanical properties must be elucidated to design new alloys with superior properties.In this study,high-fracture-to...The mechanisms of multimodal microstructure evolution and the effects of microstructural factors on mechanical properties must be elucidated to design new alloys with superior properties.In this study,high-fracture-toughness and ductile Mg_(96.75)Zn_(0.85)Y_(2.05)Al_(0.35) alloys were developed using rapidly solidified(RS)ribbon-consolidation technique,and the inherited multimodal microstructure evolution during plastic flow consolidation of the RS ribbons was investigated.The use of extrusion for plastic flow consolidation of the heat-treated RS ribbons produced a multimodal microstructure consisting of the worked grains with high Kernel average misorientation(KAM)angles(Group1),the ultrafine dynamically recrystallized(DRXed)grains with intermediate KAM angles(Group 2),and the fine DRXed grains with low KAM angles(Group 3).Groups 1 and 2 contribute to the alloy strengthening,while Group 3 contributes to improving ductility with strainhardening,resulting in enhancement of the fracture toughness.To form the multimodal microstructure,it was necessary to apply plastic flow with equivalent strains of>2.3 to the heat-treated RS ribbons possessing duplex microstructures with different dispersions of the long-period stacking ordered phase.展开更多
文摘Heat treatments play a crucial role in enhancing the mechanical properties of AZ91 Mg alloy by dissolving coarse phases during solution treatment and promoting precipitation during aging.However,non-uniform microstructures and coarse secondary phases in conventional casting methods hinder the effectiveness of these treatments,leading to reduced ductility,inconsistent properties,and prolonged durations.To overcome these challenges,this study introduces the Strain Integrated Gas-Infusion(SIGI)casting process that integrates strain and gas infusion in the semi-solid state.The impact of the SIGI process on the solution treatment and aging kinetics of AZ91 Mg alloy is explored.The SIGI process refinesα-Mg andβ-Mg_(17)Al_(12)phases,significantly enhancing mechanical properties.Experimental and quantitative analyses reveal that the SIGI process accelerates solute atom dissolution,reducing solution treatment times by half,and promotes faster nucleation and growth of precipitates during aging,shortening aging times by one-third.These improvements result in substantial gains in ultimate tensile strength(~40-50%)and ductility(~20-30%)after age hardening compared to conventional casting.The mechanisms driving these changes,including enhanced nucleation rates,reduced diffusion distances,and microstructural refinement,are discussed.These findings demonstrate the potential of the SIGI casting process to advance magnesium alloy performance for engineering applications.
基金supported by Japan Society for the Promotion of Science(KAKENHI Grant-in-Aid for Scientific Research,18H05475,18H05476 and JP20H00312)MRC International Collaborative Research Grant+4 种基金The authors would like to thank the Czech Science Foundation(Project No.22-22248S)specific university research(A1_FCHT_2024_007)for financial supportsupported by the Ministry of Education,Youth,and Sports of the Czech Republic.Project No.CZ.02.01.01/00/22_008/0004591co-funded by the European UnionCzechNanoLab project LM2023051 funded by MEYS CR is gratefully acknowledged for the financial support of the measurements/sample fabrication at LNSM Research Infrastructure。
文摘The Mg-Y-Zn magnesium alloy system is known for the presence of Long-Period Stacking Ordered(LPSO)phases that improves strength and ductility with minimal amounts of alloying elements.Even better improvements are associated with the specific microstructure known as the Mille-Feuille(MF)structure that can occur in this alloy as well after proper heat treatment.This study systematically compares the traditional ingot metallurgy method with the Bridgman method(slow cooling),coupled with diverse heat treatments and extrusion process.Microscopic analyses reveal variations in the presence of LPSO phases,MF structure,and especially grain size,leading to divergent mechanical and corrosion properties.The Bridgman approach surprisingly stands out,ensuring superior mechanical properties due to kink and texture strengthening.
文摘Realising the potential of Magnesium(Mg),several globally leading ventures have invested in the Mg industry,but their relatively poor corrosion resistance is a never ending saga till date.The corrosion and bio-corrosion behaviour of Mg has gained research attention and still remains a hot topic in the application of automobile,aerospace and biomedical industries.The intrinsic high electrochemical nature of Mg limits their utilization in diverse application.This scenario has prompted the development of Mg composites with an aim to achieve superior corrosion and bio-corrosion resistance.The present review enlightens the influence of grain size(GS),secondary phase,texture,type of matrix and reinforcement on the corrosion and bio-corrosion behaviour of Mg composites.Firstly,the corrosion and bio-corrosion behaviour of Mg composites manufactured by primary and secondary processing routes are elucidated.Secondly,the comprehensive corrosion and bio-corrosion mechanisms of these Mg composites are proposed.Thirdly,the individual role of GS,texture and corrosive medium on corrosion and bio-corrosion behaviour of Mg composites are clarified and revealed.The challenges encountered,unanswered issues in this field are explained in detail and accordingly the scope for future research is framed.The review is presented from basic concrete background to advanced corrosion mechanisms with an aim of creating interest among the readers like students,researchers and industry experts from various research backgrounds.Indeed,the corrosion and bio-corrosion behaviour of Mg composites are critically reviewed for the first time to:(i)contribute to the body of knowledge,(ii)foster research and development,(iii)make breakthrough,and(iv)create life changing innovations in the field of Mg composite corrosion.
基金funded by the National Centre for Research and Development in Poland, project V4-JAPAN/2/15 “Development of Advanced Magnesium Alloys for Multifunctional Applications in Extreme Environments,” under statutory work at the Faculty of Material Science and Engineering Warsaw University of Technology in Polandthe International Visegrad Fund (project no. JP39421, V4Japan Joint Research Program)+3 种基金the support of the International Visegrad Fund (project V4Japan Joint Research Program, Ref. JP3936)the National Research, Development and Innovation Office (contract no. 2019-2.1.7-ERA-NET-2021-00030)Support by the Ministry of Education, Youth and Sports of the Czech Republic in the framework of Visegrad Group (V4)-Japan Joint Research Program-Advanced Materials under grant no. 8F21011 is gratefully acknowledged by K.M., D.D., and A.Fthe support from the Department of Metal and Corrosion Engineering, University of Chemical Technology, Prague, Czech Republic, while performing the tribocorrosion measurements
文摘In this study,the effect of annealing on the microstructure and following corrosion and biological properties of Mg-1.0Ca-0.5Zn-0.1Y-0.03Mn(at.%)alloy prepared by rapid solidified powder metallurgy was investigated.The annealing at 300℃ for 2 h did not change the grain size significantly;however,a slight growth of Mg_(2)Ca precipitates was observed.When the annealing temperature increased up to 400℃ for 2 h,full recrystallization of the alloy occurred;the grains and precipitates grew noticeably.Those changes were responsible for decreasing the corrosion and the tribocorrosion resistance of the alloy.Due to lowered resistance to the corrosion medium,the cell viability was also reduced.Although MG63 cells on the annealed specimens developed filopodia,cell-to-cell communication was not observed.
基金supported by the International Visegrad Fund(project V4-Japan Joint Research Program,Ref.JP3936)the National Research,Development and Innovation Office(Contract No.:2019-2.1.7-ERA-NET-2021-00030)+1 种基金Support by the Ministry of Education,Youth and Sports of Czech Republic in the framework of Visegrad Group(V4)-Japan Joint Research Program-Advanced Materials under grant No 8F21011 is gratefully acknowledged by K.M.,D.D.and A.Fsupported by JST SICORP Grant Number JPMJSC2109,Japan.
文摘Dilute Mg alloys processed by the rapidly solidified ribbon consolidation(RSRC)technique are candidate materials for structural applications due to their enhanced mechanical performance.The thermal stability of the structure in these alloys strongly influences their mechanical performance at elevated temperatures.In this study,an RSRC-processed Mg-1%Ca-0.5%Zn-0.1%Y-0.03%Mn(at%)alloy was heated at a constant rate up to 833 K,and concurrently in situ X-ray diffraction(XRD)measurements were performed using synchrotron radiation in order to monitor the changes in the structure.In addition,ex situ electron microscopy investigations were carried out before and after annealing to complete the XRD study.On the basis of XRD results,the stages of the microstructure evolution during heating were identified.In addition,the thermal expansion coefficients of the matrix and the Mg_(2)Ca secondary phase were determined.Between 299 and 400 K,the lattice constants of both the matrix and the Mg_(2)Ca phase increased due to thermal expansion.In the temperature range of 400-673 K,the increase of the lattice constants with increasing the temperature continued,but their rate was different for the two phases which can induce thermal stresses.Between 673 and 753 K,the lattice constants of the secondary phase did not change most probably due to the compensating effects of the thermal expansion and the decrease of the Ca content.In the temperature range of 753-793 K,the Mg_(2)Ca phase started to dissolve.Between 793 and 833 K the dissolution continued,and additionally the matrix was partially melted.
文摘Magnesium alloys are best known for their light weight and high strength-to-weight ratio.In the forging process of magnesium alloys,hot working of has been often carried out.However,the strength of the material is reduced because the material temperature reaches the recrystallization temperature during hot working.Therefore,the cold method working is required to maintain or increase the strength of a material.In this study,we have designed experimental equipment to examine whether the forming of magnesium alloy is possible in the cold working by utilizing underwater shock wave,and the hardness of the material changes by receiving the underwater shock wave.Experimental results revealed increase in coefficient of extension and hardness of materials after receiving a shock wave.
基金supported by the JST CREST for Research Area“Nanomechanics”[JPMJCR2094]the JSPS KAKENHI for Scientific Research B[JP21H01673]the AMADA Foundation[AF-2023044-C2].
文摘The fracture toughness of extruded Mg-1Zn-2Y(at.%)alloys,featuring a multimodal microstructure containing fine dynamically recrystallized(DRXed)grains with random crystallographic orientation and coarse-worked grains with a strong fiber texture,was investigated.The DRXed grains comprised randomly oriented equiaxedα-Mg grains.In contrast,the worked grains includedα-Mg and long-period stacking ordered(LPSO)phases that extended in the extrusion direction(ED).Both types displayed a strong texture,aligning the(10.10)direction parallel to the ED.The volume fractions of the DRXed and worked grains were controlled by adjusting the extrusion temperature.In the longitudinal-transverse(L-T)orientation,where the loading direction was aligned parallel to the ED,there was a tendency for the conditional fracture toughness,KQ,tended to increase as the volume fraction of the worked grains increased.However,the KQ values in the T-L orientation,where the loading direction was perpendicular to the ED,decreased with an increase in the volume fraction of the worked grains.This suggests strong anisotropy in the fracture toughness of the specimen with a high volume fraction of the worked grains,relative to the test direction.The worked grains,which included the LPSO phase and were elongated perpendicular to the initial crack plane,suppressed the straight crack extension,causing crack deflection,and generating secondary cracks.Thus,these worked grains significantly contributed to the fracture toughness of the extruded Mg-1Zn-2Y alloys in the L-T orientation.
基金financially supported by the International Visegrad Fund(project V4-Japan Joint Research Program,Ref.JP3936)the National Research,Development and Innovation Office(Contract No.:2019-2.1.7-ERANET-2021-00030)+1 种基金Support by the Ministry of Education,Youth and Sports of Czech Republic in the framework of Visegrad Group(V4)-Japan Joint Research Program-Advanced Materials under grant No.8F21011supported by JST SICORP Grant Number JPMJSC2109,Japan。
文摘Mg-Y-Zn-Al alloys processed by rapidly solidified ribbon consolidation(RSRC)technique exhibit an exceptional mechanical performance indicating promising application potential.This material has a bimodal microstructure consisting of fine recrystallized and coarse non-recrystallized grains with solute-rich stacking faults forming cluster arranged layers(CALs)and nanoplates(CANaPs),or complete long period stacking ordered(LPSO)phase.In order to reveal the deformation mechanisms,in-situ synchrotron X-ray diffraction line profile analysis was employed for a detailed study of the dislocation arrangement created during tension in Mg-0.9%Zn-2.05%Y-0.15%Al(at%)alloy.For uncovering the effect of the initial microstructure on the mechanical performance,additional samples were obtained by annealing of the as-consolidated specimen at 300 and 400℃ for 2 h.The heat treatment at 300℃ had no significant effect on the initial microstructure,its evolution during tension and,thus,the overall deformation behavior under tensile loading.On the other hand,annealing at 400℃ resulted in a significant increase of the recrystallized grains fraction and a decrease of the dislocation density,leading to only minor degradation of the mechanical strength.The maximum dislocation density at the failure of the samples corresponding to the plastic strain of 10-25% was estimated to be about 16-20×10^(14)m^(-2).The diffraction profile analysis indicated that most dislocations formed during tension were of non-basal and pyramidal types,what was also in agreement with the Schmid factor values revealed independently from orientation maps.It was also shown that the dislocation-induced Taylor hardening was much lower below the plastic strain of 3% than above this value,which was explained by a model of the interaction between prismatic dislocations and CANaPs/LPSO plates.
基金supported by the JST CREST for Research Area“Nanomechanics”[JPMJCR2094]the AMADA Foundation[AF-2023044-C2].
文摘This study aims to investigate the extrusion temperature effects on the development of heterogeneous microstructures and mechanical properties,focusing on their impact on the fracture toughness of AZ31B alloys.Magnesium AZ31B(Mg-3wt%Al-1wt%Zn)alloys with high strength and reasonable fracture toughness,featuring heterogeneous microstructures,were fabricated via warm/hot extrusion at temperatures ranging from 523 to 723 K.The AZ31B alloy extruded at 523 K was bimodally grained into coarse worked grains with high Kernel average misorientation(KAM)values and fine dynamically recrystallized(DRXed)grains(<10μm)with intermediate KAM values.The 523 K-extruded alloy exhibited a high tensile yield strength of∼280 MPa and fracture toughness KJIC of∼26 MPa·m^(1/2).Conversely,the 723 K-extruded AZ31B alloy was trimodally grained into a small amount of worked grains,fine DRXed grains,and coarse DRXed grains(>10μm)with low KAM values.The 723 K-extruded alloy exhibited low tensile yield strength but a high KJIC value of∼36 MPa·m^(1/2)owing to the high energy dissipation for crack extension in the coarse DRXed grains.
基金supported by Grants-in-Aid for Scientific Research C(JP21K04693)from JSPS,Japan。
文摘Mg_(97)Zn_(1)Y_(2)alloys with high ignition temperatures were developed by adding Sr.The addition of Sr resulted in the formation of a uniform and thin Y_(2)O_(3)film.Mg–Zn–Y alloys containing at least 0.25 at.%Sr exhibited ignition temperatures of 1270–1320 K.As a result of EDS measurement,Sr was found to be concentrated in the Y_(2)O_(3)film.In addition,a mixed film of MgO and Sr O formed on the outer layer in the 1.5 at.%Sr-containing Mg_(97)Zn_(1)Y_(2)alloy.These findings suggest that the uniform and thin Y_(2)O_(3)film that maintains high soundness at high temperatures was formed owing to valence control and the formation of a protective outer oxide film.
基金supported by Japan Society for the Promotion of Science(KAKENHI Grant-in-Aid for Scientific Research18H05475,18H05476 and JP20H00312)+2 种基金MRC International Collaborative Research Grant.The authors would like to thank the Czech Science Foundation(Project No.22-22248S)specific university research(A1_FCHT_2024_007)for financial supportthe assistance provided by the Ferroic Multifunctionalities project,supported by the Ministry of Education,Youth,and Sports of the Czech Republic.Project No.CZ.02.01.01/00/22_008/0004591,co-funded by the European Union.CzechNanoLab project LM2023051 funded by MEYS CR is gratefully acknowledged for the financial support of the measurements/sample fabrication at LNSM Research Infrastructure.
文摘The Mg-Y-Zn magnesium alloy system is commonly recognized for its remarkable combination of high strength and ductility,achieved even with minimal amounts of alloying elements.This exceptional performance is attributed to its unique microstructure,which includes Long-Period Stacking Ordered(LPSO)phases or the distinctive microstructure derived from the LPSO phase,referred to as the Mille-Feuille structure(MFS).This study systematically compares the traditional ingot metallurgy method with the rapid solidification technique,coupled with diverse heat treatments and extrusion processes.Microscopic analyses reveal variations in the presence of LPSO phases,Mille-Feuille structure,and grain size,leading to divergent mechanical and corrosion properties.The rapid solidification approach stands out,ensuring superior mechanical properties alongside a reasonable corrosion rate.
基金The authors acknowledge the Deutsches Elektronen-Synchrotron for the provision of facilities within the framework of the proposal I-20170459 ECThe authors are also grateful for support from the Grant Agency of the Charles University,grant number 1262217+3 种基金the grant SVV-2019-260442the Czech Science Foundation under grant 17-21855Sthe Operational Programme Research,Development and Education,The Ministry of Education,Youth and Sports(OP RDE,MEYS),grant number CZ.02.1.01/0.0/0.0/16_013/0001794GG thanks the support of the Spanish Ministry of Economy and Competitiveness,grant number MAT2016-78850-R.
文摘The compressive deformation behavior of the extruded WZ42(Mg98.5Y1Zn0.5 in at.%)magnesium alloy containing a low amount of long-period stacking ordered(LPSO)phase was studied by in-situ synchrotron radiation diffraction technique.Tests were conducted at temperatures between room temperature and 350℃.Detailed microstructure investigation was provided by scanning electron microscopy,particularly the backscattered electron imaging and electron backscatter diffraction technique.The results show that twinning lost its dominance and kinking of the LPSO phase became more pronounced with increasing deformation temperature.No cracks of the LPSO phase and no debonding r at the interface between the LPSO phase and the Mg matrix were observed at temperatures above 200℃.At 350℃,the LPSO phase lost its strengthening effect and the deformation of the alloy was mainly realized by the dynamic recrystallization of the Mg matrix.
基金supported by the JSPS KAKENHI for Scientific Research on Innovative Areas“MFS Materials Science”(JP18H05476)for Scientific Researches(JP20H00312 and JP21H01673)support from the Research Fellowships of the JSPS for Young Scientists(21J13431)。
文摘The mechanisms of multimodal microstructure evolution and the effects of microstructural factors on mechanical properties must be elucidated to design new alloys with superior properties.In this study,high-fracture-toughness and ductile Mg_(96.75)Zn_(0.85)Y_(2.05)Al_(0.35) alloys were developed using rapidly solidified(RS)ribbon-consolidation technique,and the inherited multimodal microstructure evolution during plastic flow consolidation of the RS ribbons was investigated.The use of extrusion for plastic flow consolidation of the heat-treated RS ribbons produced a multimodal microstructure consisting of the worked grains with high Kernel average misorientation(KAM)angles(Group1),the ultrafine dynamically recrystallized(DRXed)grains with intermediate KAM angles(Group 2),and the fine DRXed grains with low KAM angles(Group 3).Groups 1 and 2 contribute to the alloy strengthening,while Group 3 contributes to improving ductility with strainhardening,resulting in enhancement of the fracture toughness.To form the multimodal microstructure,it was necessary to apply plastic flow with equivalent strains of>2.3 to the heat-treated RS ribbons possessing duplex microstructures with different dispersions of the long-period stacking ordered phase.
