1.Deepening the network infrastructure and business systems security.Seriously implement the"communications network security management approach"(MIIT Order No.11)and communication network security series of...1.Deepening the network infrastructure and business systems security.Seriously implement the"communications network security management approach"(MIIT Order No.11)and communication network security series of standards,do a good job in grading for the record,strictly implement protective measures,regularly carry out compliance evaluation and risk assessment in a timely manner in order to eliminate safety hazards.Strengthen network and information asset manage-展开更多
Water scarcity,exacerbated by organic micropollutant contamination and climate change,necessitates energy-efficient,eco-friendly purification technologies.Membrane separation has emerged as a transformative solution,o...Water scarcity,exacerbated by organic micropollutant contamination and climate change,necessitates energy-efficient,eco-friendly purification technologies.Membrane separation has emerged as a transformative solution,outperforming energyintensive processes,such as distillation.As highlighted in Nature,traditional chemical separations—dominated by distillation—consume 10%-15%of global energy,whereas advanced membrane technologies can reduce energy use by up to 90%.展开更多
High-performance fiber fabrics and composites experienced transverse compression deformation at ultrahigh strain rates near the impact point when subjected to high-velocity impacts,which significantly affected their b...High-performance fiber fabrics and composites experienced transverse compression deformation at ultrahigh strain rates near the impact point when subjected to high-velocity impacts,which significantly affected their ballistic limits.In this paper,a fiber-scale experimental method for characterizing ultrahigh strain-rate transverse compression behavior was proposed.To begin with,in order to measure the extremely low stress and strain in small specimens,the conventional Hopkinson bar was reduced to the hundred-micron scale,thereby achieving wave impedance matching with single fibers.In addition,tangential and normal laser Doppler velocimetry(LDV)methods were employed to realize non-contact,high-precision,and high-speed axial velocity measurements of micron-scale incident and transmission bars,respectively.Meanwhile,a microscopic observation system was used to facilitate the installation of miniature fiber samples.The experimental setup and procedures were introduced,and the system accuracy was verified through sample-free loading tests based on one-dimensional stress wave propagation theory.Dynamic compression experiments on Graphene-UHMWPE fibers were carried out,followed by post-compression microstructural characterization via scanning electron microscopy(SEM).Results demonstrated that successful mechanical characterization was achieved at strain rates exceeding 105,an order of magnitude higher than the previously reported maximum rates.Furthermore,during the loading process,the fibers underwent uniform compression deformation while exhibiting pronounced strain-rate effects.This method offers a novel approach for dynamic mechanical characterization of microscale single fibers,enabling the development of comprehensive strain-ratedependent material models to guide the design of advanced composites and high-performance fibers.展开更多
Singlet oxygen(^(1)O_(2))is recognized as one of the most effective and selective oxygen agents.However,the explorative study of photocatalysts(PCs)for effective ^(1)O_(2)-based photocatalytic oxidation remains challe...Singlet oxygen(^(1)O_(2))is recognized as one of the most effective and selective oxygen agents.However,the explorative study of photocatalysts(PCs)for effective ^(1)O_(2)-based photocatalytic oxidation remains challenging and critical.In this study,a novel donor-acceptor metal-organic framework(D-A MOF)has been developed by engineering the D-A system,which was then evaluated as a photocatalyst for ^(1)O_(2)-based oxidation.By regulating the donor component of the D-A systematic framework,the MOF(B1)exhibits delayed fluorescence(DF)behavior with a reduced singlet-triplet gap.Given the significantly improved electron transfer behavior in combination with an efficient energy transfer process,the optimal B1 demonstrates remarkable activity toward ^(1)O_(2)generation under suitable photoexcitation conditions.Therefore,it can be utilized for the photocatalytic oxidation of 1,5-dioxynaphthalene(1,5-DHN)to Juglone,achieving the highest yield(conversion>99%at 25℃ in 30 min)and selectivity among all previously reported MOF photocatalysts.展开更多
Hard carbon is a vital anode material for sodium-ion batteries;however,the nonuniform growth of solid electrolyte interphase(SEI)film substantially diminishes its initial coulombic efficiency(ICE)and cycle life.The ch...Hard carbon is a vital anode material for sodium-ion batteries;however,the nonuniform growth of solid electrolyte interphase(SEI)film substantially diminishes its initial coulombic efficiency(ICE)and cycle life.The chemical and morphological properties of surface highly influence the electrode/electrolyte interfacial reactions.In this study,we have tuned orbital hybridization states forming an interface enriched with sp^(2) hybridized carbon(sp^(2)-C),which decreases the binding energy to solvent molecules and inhibits excessive solvent decomposition during SEI formation.Benefiting from successfully constructed inorganic-rich SEI,the ICE increased to 91%and sodium storage capacity reached 346 mAh/g.Besides,the capacity retention rate was 90.7%after 700 cycles at 1 A/g higher than pristine electrode(83.8%).展开更多
Aqueous zinc-ion batteries(AZIBs) are regarded as one of the most promising energy conversion and storage devices.Nevertheless,side reactions and dendrite growth on the zinc metal anode hinder their widespread applica...Aqueous zinc-ion batteries(AZIBs) are regarded as one of the most promising energy conversion and storage devices.Nevertheless,side reactions and dendrite growth on the zinc metal anode hinder their widespread application.In this study,hemin was employed as a multi-functional artificial interface for the first time to inhibit the disordered growth of zinc dendrites and mitigate side reactions.Theoretical calculations indicate that hemin is preferentially adsorbed onto the zinc anode,thus blocking the interaction between the active zinc anode and electrolyte.Compared with zinc foil,the Hemin@Zn anode demonstrates enhanced corrosion resistance,a decrease in hydrogen evolution,and more orderly deposition of zinc.As expected,the symmetric cell with Hemin@Zn anode can sustain up to 4000 h at 0.2 mA/cm^(2),0.2 mAh/cm^(2).Asymmetric Zn//Cu cells exhibit an average coulombic efficiency exceeding 99.72 % during 500 cycles.Moreover,the full cell Hemin@Zn//NH_(4)V_(4)O_(10) delivers a superior capacity up to 367 m Ah/g and the discharge capacity retention reaches 124 mAh/g after 1200 cycles even at a current density of 5 A/g.This work provides a simple and effective method for constructing a robust artificial interface to promote the application of long-life AZIBs.展开更多
The electromagnetic wave absorption of silicon carbide nanowires is improved by their uniform and diverse cross-structures.This study introduces a sustainable and high value-added method for synthesizing silicon carbi...The electromagnetic wave absorption of silicon carbide nanowires is improved by their uniform and diverse cross-structures.This study introduces a sustainable and high value-added method for synthesizing silicon carbide nanowires using lignite and waste silicon powder as raw materials through carbothermal reduction.The staggered structure of nanowires promotes the creation of interfacial polarization,impedance matching,and multiple loss mechanisms,leading to enhanced electromagnetic absorption performance.The silicon carbide nanowires demonstrate outstanding electromagnetic absorption capabilities with the minimum reflection loss of-48.09 d B at10.08 GHz and an effective absorption bandwidth(the reflection loss less than-10 d B)ranging from 8.54 to 16.68 GHz with a thickness of 2.17 mm.This research presents an innovative approach for utilizing solid waste in an environmentally friendly manner to produce broadband silicon carbide composite absorbers.展开更多
Electrically controlled solid propellant(ECSP)offers multiple ignition and adjustable burning rate,serving as fuel for next-generation intelligent propulsion systems.To further enhance the combustion performance of EC...Electrically controlled solid propellant(ECSP)offers multiple ignition and adjustable burning rate,serving as fuel for next-generation intelligent propulsion systems.To further enhance the combustion performance of ECSP,a method utilizing electrochemical and thermal decomposition catalysts has been proposed.In this work,we investigated the combustion characteristics of hydroxylamine nitrate(HAN)-based ECSP incorporating cerium oxide(CeO_(2))and graphene oxide(GO)by using an electrically controlled combustion test system.Electrochemical impedance spectroscopy(EIS)and linear sweep voltammetry(LSV)were used to measure the electrical conductibility and overpotential of ECSP with various additives,and Tafel curves were calculated.Thermogravimetric analysis coupled with differential scanning calorimetry(TG-DSC)was employed to investigate the thermal decomposition behavior of ECSP.While the addition of CeO_(2) and GO reduced the conductivity of ECSP,both catalysts exhibited strong electrocatalytic properties and facilitated the thermal decomposition of ECSP.Between two catalysts,GO demonstrated superior electrochemical catalytic performance but weaker thermal decomposition catalytic ability than CeO_(2).The addition of catalysts significantly enhanced the combustion performance of HAN-based ECSP.Specifically,the ignition delay time was shortened by 10%~20%.CeO_(2) raised the burning rate by approximately 20%but GO exhibited a remarkable boost of 40%in burning rate at high voltage.The combination of GO and PVA produced a flame-retardant substance that negatively impacted the ignition delay of ECSP and resulted in a smaller increase in the burning rate of ECSP at low ignition voltages.展开更多
文摘1.Deepening the network infrastructure and business systems security.Seriously implement the"communications network security management approach"(MIIT Order No.11)and communication network security series of standards,do a good job in grading for the record,strictly implement protective measures,regularly carry out compliance evaluation and risk assessment in a timely manner in order to eliminate safety hazards.Strengthen network and information asset manage-
文摘Water scarcity,exacerbated by organic micropollutant contamination and climate change,necessitates energy-efficient,eco-friendly purification technologies.Membrane separation has emerged as a transformative solution,outperforming energyintensive processes,such as distillation.As highlighted in Nature,traditional chemical separations—dominated by distillation—consume 10%-15%of global energy,whereas advanced membrane technologies can reduce energy use by up to 90%.
基金financial support provided by the National Natural Science Foundation of China(Grant No.12302472)the Science and Technology Support Program of Jiangsu Province(Grant No.BK20230874)+2 种基金the Aeronautical Science Fund(ASF)(Grant No.2023Z057052005)the Research Fund of State Key Laboratory of Mechanics and Control for Aerospace Structures(Nanjing University of Aeronautics and Astronautics)(Grant No.MCAS-I-0124G02)the funding received from Jiangsu Hanvo Safety Product Co.,Ltd。
文摘High-performance fiber fabrics and composites experienced transverse compression deformation at ultrahigh strain rates near the impact point when subjected to high-velocity impacts,which significantly affected their ballistic limits.In this paper,a fiber-scale experimental method for characterizing ultrahigh strain-rate transverse compression behavior was proposed.To begin with,in order to measure the extremely low stress and strain in small specimens,the conventional Hopkinson bar was reduced to the hundred-micron scale,thereby achieving wave impedance matching with single fibers.In addition,tangential and normal laser Doppler velocimetry(LDV)methods were employed to realize non-contact,high-precision,and high-speed axial velocity measurements of micron-scale incident and transmission bars,respectively.Meanwhile,a microscopic observation system was used to facilitate the installation of miniature fiber samples.The experimental setup and procedures were introduced,and the system accuracy was verified through sample-free loading tests based on one-dimensional stress wave propagation theory.Dynamic compression experiments on Graphene-UHMWPE fibers were carried out,followed by post-compression microstructural characterization via scanning electron microscopy(SEM).Results demonstrated that successful mechanical characterization was achieved at strain rates exceeding 105,an order of magnitude higher than the previously reported maximum rates.Furthermore,during the loading process,the fibers underwent uniform compression deformation while exhibiting pronounced strain-rate effects.This method offers a novel approach for dynamic mechanical characterization of microscale single fibers,enabling the development of comprehensive strain-ratedependent material models to guide the design of advanced composites and high-performance fibers.
基金supported by the National Key R&D Program of China(2022YFA1503301)the National Natural Science Foundation of China(NSFC)(22375104,22035003,22201143,22371134)+1 种基金the China Postdoctoral Science Foundation(2022M711699)the Haihe Laboratory of Sustainable Chemical Transformations(YYJC202101)。
文摘Singlet oxygen(^(1)O_(2))is recognized as one of the most effective and selective oxygen agents.However,the explorative study of photocatalysts(PCs)for effective ^(1)O_(2)-based photocatalytic oxidation remains challenging and critical.In this study,a novel donor-acceptor metal-organic framework(D-A MOF)has been developed by engineering the D-A system,which was then evaluated as a photocatalyst for ^(1)O_(2)-based oxidation.By regulating the donor component of the D-A systematic framework,the MOF(B1)exhibits delayed fluorescence(DF)behavior with a reduced singlet-triplet gap.Given the significantly improved electron transfer behavior in combination with an efficient energy transfer process,the optimal B1 demonstrates remarkable activity toward ^(1)O_(2)generation under suitable photoexcitation conditions.Therefore,it can be utilized for the photocatalytic oxidation of 1,5-dioxynaphthalene(1,5-DHN)to Juglone,achieving the highest yield(conversion>99%at 25℃ in 30 min)and selectivity among all previously reported MOF photocatalysts.
基金support from the Heilongjiang Province"Double First Class"Discipline Collaborative Innovation Project(No.LJGXCG2023-061).
文摘Hard carbon is a vital anode material for sodium-ion batteries;however,the nonuniform growth of solid electrolyte interphase(SEI)film substantially diminishes its initial coulombic efficiency(ICE)and cycle life.The chemical and morphological properties of surface highly influence the electrode/electrolyte interfacial reactions.In this study,we have tuned orbital hybridization states forming an interface enriched with sp^(2) hybridized carbon(sp^(2)-C),which decreases the binding energy to solvent molecules and inhibits excessive solvent decomposition during SEI formation.Benefiting from successfully constructed inorganic-rich SEI,the ICE increased to 91%and sodium storage capacity reached 346 mAh/g.Besides,the capacity retention rate was 90.7%after 700 cycles at 1 A/g higher than pristine electrode(83.8%).
基金financially supported by the National Natural Science Foundation of China (No.52372188)Natural Science Foundation of Henan (Nos.242300421625,252300421333)+4 种基金CAS Henan Industrial Technology Innovation & Incubation Center (No.2024121)Key Scientific Research Project of Education Department of Henan Province (Nos.22A150042,23A150038,and 24A150019)2023 Introduction of studying abroad talent programthe China Postdoctoral Science Foundation (No.2019 M652546)Key Project of Science and Technology of Henan Province (No.252102240007)。
文摘Aqueous zinc-ion batteries(AZIBs) are regarded as one of the most promising energy conversion and storage devices.Nevertheless,side reactions and dendrite growth on the zinc metal anode hinder their widespread application.In this study,hemin was employed as a multi-functional artificial interface for the first time to inhibit the disordered growth of zinc dendrites and mitigate side reactions.Theoretical calculations indicate that hemin is preferentially adsorbed onto the zinc anode,thus blocking the interaction between the active zinc anode and electrolyte.Compared with zinc foil,the Hemin@Zn anode demonstrates enhanced corrosion resistance,a decrease in hydrogen evolution,and more orderly deposition of zinc.As expected,the symmetric cell with Hemin@Zn anode can sustain up to 4000 h at 0.2 mA/cm^(2),0.2 mAh/cm^(2).Asymmetric Zn//Cu cells exhibit an average coulombic efficiency exceeding 99.72 % during 500 cycles.Moreover,the full cell Hemin@Zn//NH_(4)V_(4)O_(10) delivers a superior capacity up to 367 m Ah/g and the discharge capacity retention reaches 124 mAh/g after 1200 cycles even at a current density of 5 A/g.This work provides a simple and effective method for constructing a robust artificial interface to promote the application of long-life AZIBs.
基金supported by the National Natural Science Foundation of China(No.52436008)the Inner Mongolia Science and Technology Projects,China(Nos.JMRHZX20210003 and 2023YFCY0009)+3 种基金the Huaneng Group Co Ltd.,China(No.HNKJ23-H50)the National Natural Science Foundation of China(No.22408044)the China Postdoctoral Science Foundation(No.2024M761877)the National Key R&D Program of China(No.SQ2024YFD2200039)。
文摘The electromagnetic wave absorption of silicon carbide nanowires is improved by their uniform and diverse cross-structures.This study introduces a sustainable and high value-added method for synthesizing silicon carbide nanowires using lignite and waste silicon powder as raw materials through carbothermal reduction.The staggered structure of nanowires promotes the creation of interfacial polarization,impedance matching,and multiple loss mechanisms,leading to enhanced electromagnetic absorption performance.The silicon carbide nanowires demonstrate outstanding electromagnetic absorption capabilities with the minimum reflection loss of-48.09 d B at10.08 GHz and an effective absorption bandwidth(the reflection loss less than-10 d B)ranging from 8.54 to 16.68 GHz with a thickness of 2.17 mm.This research presents an innovative approach for utilizing solid waste in an environmentally friendly manner to produce broadband silicon carbide composite absorbers.
基金supported by the National Natural Science Foundation of China(Grant No.12074187).
文摘Electrically controlled solid propellant(ECSP)offers multiple ignition and adjustable burning rate,serving as fuel for next-generation intelligent propulsion systems.To further enhance the combustion performance of ECSP,a method utilizing electrochemical and thermal decomposition catalysts has been proposed.In this work,we investigated the combustion characteristics of hydroxylamine nitrate(HAN)-based ECSP incorporating cerium oxide(CeO_(2))and graphene oxide(GO)by using an electrically controlled combustion test system.Electrochemical impedance spectroscopy(EIS)and linear sweep voltammetry(LSV)were used to measure the electrical conductibility and overpotential of ECSP with various additives,and Tafel curves were calculated.Thermogravimetric analysis coupled with differential scanning calorimetry(TG-DSC)was employed to investigate the thermal decomposition behavior of ECSP.While the addition of CeO_(2) and GO reduced the conductivity of ECSP,both catalysts exhibited strong electrocatalytic properties and facilitated the thermal decomposition of ECSP.Between two catalysts,GO demonstrated superior electrochemical catalytic performance but weaker thermal decomposition catalytic ability than CeO_(2).The addition of catalysts significantly enhanced the combustion performance of HAN-based ECSP.Specifically,the ignition delay time was shortened by 10%~20%.CeO_(2) raised the burning rate by approximately 20%but GO exhibited a remarkable boost of 40%in burning rate at high voltage.The combination of GO and PVA produced a flame-retardant substance that negatively impacted the ignition delay of ECSP and resulted in a smaller increase in the burning rate of ECSP at low ignition voltages.
