The optical nonlinearity in polycrystalline zinc selenide(ZnSe),excited with 775 nm,1 kHz femtosecond laser pulses was investigated via the nonlinear transmission with material thickness and the Z scan technique.The m...The optical nonlinearity in polycrystalline zinc selenide(ZnSe),excited with 775 nm,1 kHz femtosecond laser pulses was investigated via the nonlinear transmission with material thickness and the Z scan technique.The measured two photon absorption coefficientβwas intensity dependent,inferring that reverse saturated absorption(RSA)is also relevant dur-ing high intensity excitation in ZnSe.At low peak intensity I<5 GW cm^(-2),we findβ=3.5 cm GW^(-1) at 775 nm.The spec-tral properties of the broad blueish two-photon induced fluorescence(460 nm-500 nm)was studied,displaying self-ab-sorption near the band edge while the upper state lifetime was measured to be τ_(e)~3.3 ns.Stimulated emission was ob-served when pumping a 0.5 mm thick polycrystalline ZnSe sample within an optical cavity,confirmed by significant line narrowing fromΔλ=11 nm(cavity blocked)toΔλ=2.8 nm at peak wavelength λ_(p)=475 nm while the upper state life-time also decreased.These results suggest that with more optimum pumping conditions and crystal cooling,polycrystal-line ZnSe might reach lasing threshold via two-photon pumping atλ=775 nm.展开更多
Direct laser metal deposition is a kind of advanced rapid manufacturing technology, which can produce near net shape parts by depositing metal powders layer by layer. This study demonstrates fabrication, the anisotrop...Direct laser metal deposition is a kind of advanced rapid manufacturing technology, which can produce near net shape parts by depositing metal powders layer by layer. This study demonstrates fabrication, the anisotropy of mechanical properties and hardness of a graded steel. The characteristics of constituent phases, microstructure, mechanical anisotropy, and microhardness were investigated using electron backscatter diffraction, optical microscopy, tensile test machine, and microhardness tester. It was found that the graded steel is dense and free of cracks. The crystal structures of the as-built samples evolved in three grades from fcc structures to fcc ＋ bcc structures and then to bcc ＋ fcc structures. Samples in x and z directions showed obvious mechanical anisotropy. The samples machined in x direction showed higher strength and lower elongation than those machined in z direction due to the presence of lack-of-fusion pores and the higher metallurgical bonding between layers in the x direction. The microhardness of the as-built samples increased along the cross section from the substrate （159.7 HV） to the top surface （545.4 HV）.展开更多
In this paper,the effects of different laser powers,repetition rates,and spot overlaps on the surface roughness,micromorphology,and Vickers hardness of rusted AH36 steel were researched in the rust removal experiment ...In this paper,the effects of different laser powers,repetition rates,and spot overlaps on the surface roughness,micromorphology,and Vickers hardness of rusted AH36 steel were researched in the rust removal experiment of fiber pulse laser on the marine steel surface.Then,the mechanical properties,corrosion resistance,and metallographic microstructure of the surface of samples after laser cleaning were analyzed.The experimental results show that when the processing parameters were the laser power of 40 W,the repetition rate of 110 k Hz,and the spot overlap of 50%,the rust removal effect on AH36 steel was the best,and it met the cleanliness standard of marine steel coating.Moreover,its Vickers hardness,mechanical properties,corrosion resistance,and repainting properties were superior to those of the original substrate.展开更多
In this paper,a lifted Haar transform(LHT)image compression optical chip has been researched to achieve rapid image compression.The chip comprises 32 same image compression optical circuits,and each circuit contains a...In this paper,a lifted Haar transform(LHT)image compression optical chip has been researched to achieve rapid image compression.The chip comprises 32 same image compression optical circuits,and each circuit contains a 2×2 multimode interference(MMI)coupler and aπ/2 delay line phase shifter as the key components.The chip uses highly borosilicate glass as the substrate,Su8 negative photoresist as the core layer,and air as the cladding layer.Its horizontal and longitudinal dimensions are 8011μm×10000μm.Simulation results present that the designed optical circuit has a coupling ratio(CR)of 0:100 and an insertion loss(IL)of 0.001548 d B.Then the chip is fabricated by femtosecond laser and testing results illustrate that the chip has a CR of 6:94 and an IL of 0.518 d B.So,the prepared chip possesses good image compression performance.展开更多
In this paper,we develop the teleportation scheme in[Zheng in Phys Rev A 69,064302,2004],in the sense that,we work in the strong atom-field coupling regime wherein the rotating wave approximation(RWA)is no longer vali...In this paper,we develop the teleportation scheme in[Zheng in Phys Rev A 69,064302,2004],in the sense that,we work in the strong atom-field coupling regime wherein the rotating wave approximation(RWA)is no longer valid.To achieve the purpose,a scheme consisting of a qubit interacting with a single-mode quantized field is described via the Rabi model(counter rotation terms are taken into account).Our first aim is to teleport an unknown atomic state of a qubit(which interacts with the quantized field in a cavity)to a second qubit(exists in another distant cavity field),beyond the RWA and without the Bell-state measurement method.In the continuation,in a similar way,we teleport an unknown state of a single-mode field too.In fact,it is shown that,in this regime,after applying some particular conditions,containing the interaction time of atom-field in the cavities,adjusting the involved frequencies,as well as the atom-field coupling in the model,if a proper measurement is performed on the state of the first qubit(the related field in the cavity),the unknown states of the qubit(field)can be teleported from the first qubit(cavity field)to the second qubit(cavity field),appropriately.We show that in both considered cases,the teleportation protocol is successfully performed with the maximum possible fidelity,1,and the acceptable success probability,0.25.展开更多
One-dimensional CdS nanocrystals have been prepared by solvothermal method using cadmium acetate as a cadmium precursor, elemental sulfur and Na2S, as a sulfur precursor, and ethylenediamine as a solvent at 150℃ for ...One-dimensional CdS nanocrystals have been prepared by solvothermal method using cadmium acetate as a cadmium precursor, elemental sulfur and Na2S, as a sulfur precursor, and ethylenediamine as a solvent at 150℃ for 5 h. The nanocrystals were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and UV-Vis absorption spectroscopy. XRD patterns indicate that both Na2S and elemental sulfur as the sulfur precursor result in CdS nanorods with wutzite phase （hexagonal structure）. SEM and TEM images show that diameter of CdS nanorods can be decreased using Na2S instead of elemental sulfur. For the growth of CdS nanorods, a mechanism has been proposed. Uv-Vis absorption of CdS nanorods （sulfur precursor： Na2S） was shown blue shift to 485 nm due to the quantum size effect.展开更多
文摘The optical nonlinearity in polycrystalline zinc selenide(ZnSe),excited with 775 nm,1 kHz femtosecond laser pulses was investigated via the nonlinear transmission with material thickness and the Z scan technique.The measured two photon absorption coefficientβwas intensity dependent,inferring that reverse saturated absorption(RSA)is also relevant dur-ing high intensity excitation in ZnSe.At low peak intensity I<5 GW cm^(-2),we findβ=3.5 cm GW^(-1) at 775 nm.The spec-tral properties of the broad blueish two-photon induced fluorescence(460 nm-500 nm)was studied,displaying self-ab-sorption near the band edge while the upper state lifetime was measured to be τ_(e)~3.3 ns.Stimulated emission was ob-served when pumping a 0.5 mm thick polycrystalline ZnSe sample within an optical cavity,confirmed by significant line narrowing fromΔλ=11 nm(cavity blocked)toΔλ=2.8 nm at peak wavelength λ_(p)=475 nm while the upper state life-time also decreased.These results suggest that with more optimum pumping conditions and crystal cooling,polycrystal-line ZnSe might reach lasing threshold via two-photon pumping atλ=775 nm.
基金financially supported by the National Key Research and Development Program of China (Grant Nos. 2016YFB1100204 and 2013ZX06002-002)the Shenyang Science and Technology Funded Project (Grant Nos. 17-29-2-00, Y17-1-031 and Z17-2-002)Financial support by the Youth Foundation of School of Stomatology, China Medical University (Grant No. K101593-17-05)
文摘Direct laser metal deposition is a kind of advanced rapid manufacturing technology, which can produce near net shape parts by depositing metal powders layer by layer. This study demonstrates fabrication, the anisotropy of mechanical properties and hardness of a graded steel. The characteristics of constituent phases, microstructure, mechanical anisotropy, and microhardness were investigated using electron backscatter diffraction, optical microscopy, tensile test machine, and microhardness tester. It was found that the graded steel is dense and free of cracks. The crystal structures of the as-built samples evolved in three grades from fcc structures to fcc ＋ bcc structures and then to bcc ＋ fcc structures. Samples in x and z directions showed obvious mechanical anisotropy. The samples machined in x direction showed higher strength and lower elongation than those machined in z direction due to the presence of lack-of-fusion pores and the higher metallurgical bonding between layers in the x direction. The microhardness of the as-built samples increased along the cross section from the substrate （159.7 HV） to the top surface （545.4 HV）.
基金supported by the Natural Science Foundation of Hubei Province(No.2017CFB685)Hubei University of Technology"Advanced Manufacturing Technology and Equipment"Collaborative Innovation Center Open Research Fund(Nos.038/1201501 and 038/1201803)the College-Level Project of Hubei University of Technology(No.4201/01758)。
文摘In this paper,the effects of different laser powers,repetition rates,and spot overlaps on the surface roughness,micromorphology,and Vickers hardness of rusted AH36 steel were researched in the rust removal experiment of fiber pulse laser on the marine steel surface.Then,the mechanical properties,corrosion resistance,and metallographic microstructure of the surface of samples after laser cleaning were analyzed.The experimental results show that when the processing parameters were the laser power of 40 W,the repetition rate of 110 k Hz,and the spot overlap of 50%,the rust removal effect on AH36 steel was the best,and it met the cleanliness standard of marine steel coating.Moreover,its Vickers hardness,mechanical properties,corrosion resistance,and repainting properties were superior to those of the original substrate.
基金the Natural Science Foundation of Hubei Province(No.2017CFB685)Hubei University of Technology"Advanced Manufacturing Technology and Equipment"Collaborative Innovation Center Open Research Fund(Nos.038/1201501 and 038/1201803)the College-level Project of Hubei University of Technology(Nos.4201/01758,4201/01802,4201/01889,and 4128/21025)。
文摘In this paper,a lifted Haar transform(LHT)image compression optical chip has been researched to achieve rapid image compression.The chip comprises 32 same image compression optical circuits,and each circuit contains a 2×2 multimode interference(MMI)coupler and aπ/2 delay line phase shifter as the key components.The chip uses highly borosilicate glass as the substrate,Su8 negative photoresist as the core layer,and air as the cladding layer.Its horizontal and longitudinal dimensions are 8011μm×10000μm.Simulation results present that the designed optical circuit has a coupling ratio(CR)of 0:100 and an insertion loss(IL)of 0.001548 d B.Then the chip is fabricated by femtosecond laser and testing results illustrate that the chip has a CR of 6:94 and an IL of 0.518 d B.So,the prepared chip possesses good image compression performance.
文摘In this paper,we develop the teleportation scheme in[Zheng in Phys Rev A 69,064302,2004],in the sense that,we work in the strong atom-field coupling regime wherein the rotating wave approximation(RWA)is no longer valid.To achieve the purpose,a scheme consisting of a qubit interacting with a single-mode quantized field is described via the Rabi model(counter rotation terms are taken into account).Our first aim is to teleport an unknown atomic state of a qubit(which interacts with the quantized field in a cavity)to a second qubit(exists in another distant cavity field),beyond the RWA and without the Bell-state measurement method.In the continuation,in a similar way,we teleport an unknown state of a single-mode field too.In fact,it is shown that,in this regime,after applying some particular conditions,containing the interaction time of atom-field in the cavities,adjusting the involved frequencies,as well as the atom-field coupling in the model,if a proper measurement is performed on the state of the first qubit(the related field in the cavity),the unknown states of the qubit(field)can be teleported from the first qubit(cavity field)to the second qubit(cavity field),appropriately.We show that in both considered cases,the teleportation protocol is successfully performed with the maximum possible fidelity,1,and the acceptable success probability,0.25.
文摘One-dimensional CdS nanocrystals have been prepared by solvothermal method using cadmium acetate as a cadmium precursor, elemental sulfur and Na2S, as a sulfur precursor, and ethylenediamine as a solvent at 150℃ for 5 h. The nanocrystals were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and UV-Vis absorption spectroscopy. XRD patterns indicate that both Na2S and elemental sulfur as the sulfur precursor result in CdS nanorods with wutzite phase （hexagonal structure）. SEM and TEM images show that diameter of CdS nanorods can be decreased using Na2S instead of elemental sulfur. For the growth of CdS nanorods, a mechanism has been proposed. Uv-Vis absorption of CdS nanorods （sulfur precursor： Na2S） was shown blue shift to 485 nm due to the quantum size effect.
