It is widely known that the hypervelocity impact of orbital debris can cause serious damage to spacecraft,and enhancing the impact resistance is the great concern of spacecraft shield design.This paper provides a comp...It is widely known that the hypervelocity impact of orbital debris can cause serious damage to spacecraft,and enhancing the impact resistance is the great concern of spacecraft shield design.This paper provides a comprehensive overview of advances in the development of bumper materials for spacecraft shield applications.In particular,the protective mechanism and process of the bumper using different materials against hypervelocity impact are reviewed and discussed.The advantages and disadvantages of each material used in shield were discussed,and the performance under hypervelocity impact was given according to the specific configuration.This review provides the useful reference and basis for researchers and engineers to create bumper materials for spacecraft shield applications,and the contemporary challenges and future directions for bumper materials for spacecraft shield were presented.展开更多
Giant magnetoimpedance(GMI)sensors are increasingly employed in modern magnetic sensing technologies.However,improving the GMI performance of magnetic cores remains challenging due to intrinsic limitations in material...Giant magnetoimpedance(GMI)sensors are increasingly employed in modern magnetic sensing technologies.However,improving the GMI performance of magnetic cores remains challenging due to intrinsic limitations in material properties and structural stability.In this work,we explore the use of Joule heating to enhance the GMI response of Fe_(20)Ni_(80)/Cu composite wires.By applying a current of 1.8 A for 10 min,notable improvements in magnetic domain uniformity and a reduction in domain spacing are observed.Under these conditions,GMI ratios reach 1870% in the non-diagonal mode and1147%in the diagonal mode,respectively,highlighting their potential for applications in high-precision weak magnetic field sensing.展开更多
Large constellations have developed rapidly in recent years because of their unique advantages, but they will inevitably have a major negative impact on the space debris environment, leading to its deterioration. The ...Large constellations have developed rapidly in recent years because of their unique advantages, but they will inevitably have a major negative impact on the space debris environment, leading to its deterioration. The key to mitigate the impact is the success rate and duration of the post-mission disposal(PMD) process. Aiming at solving this problem, this paper further studies the impact of large constellations on other space assets under different PMD strategies through simulation, and proposes corresponding strategies and suggestions for mitigation.According to One Web’s large constellation launch plan, the dangerous intersection of the large constellation with existing space assets at different stages of the constellations life cycle is calculated by simulation. Based on this, the influence of the large constellation operation on existing space assets at different times and strategies of PMD is analyzed. The conclusion shows that in the PMD stage, large constellations have the greatest impact on existing space assets;the PMD duration and number of satellites performing PMD at the same time are key factors to the degree of negative impact. The faster the PMD is, the less threat it poses to other spacecraft. More results and conclusions are still being analyzed.展开更多
Achieving vibration isolation,lightweight design,and reusability under impact remains a critical challenge for thin-walled structures.When the goat skull is subjected to impact,both the outer wall of the sinus and the...Achieving vibration isolation,lightweight design,and reusability under impact remains a critical challenge for thin-walled structures.When the goat skull is subjected to impact,both the outer wall of the sinus and the internal bony struts deform simultaneously to absorb energy and protect intracranial tissues.Inspired by this mechanism,we designed the goat sinus-inspired bio mimetic(GSIB) structure by mimicking the outer wall of the sinus and the internal pillar-like support system.The structure consists of dual coupling beams,including a set of inclined cantilever beams representing the sinus outer wall and vertical support beams simulating the internal bony struts.The GSIB structure was fabricated using Selective Laser Sintering(SLS) 3D printing technology,and its mechanical properties were investigated through a combination of quasi-static compression tests,vibration tests,impact tests,and finite element simulations.Under compressive loading,the inclined cantilever beams buckle to introduce a negative stiffness effect,while the vertical supports enhance overall stiffness.Leveraging the coupling effect between these two components,the structure achieves a long-stroke constant-force response,thereby delivering superior performance in energy absorption and vibration isolation.Additionally,the special deformation mode of the GSIB structure enables it to be reused under impact conditions.It is noteworthy that,compared to the negative stiffness(NS) structure with the same dimensions for repeated buffering proposed in previous studies,the GSIB structure demonstrates an energy absorption capacity reaching 214.3% of that of the NS structure,a reduction in isolation frequency to 58.5%,and an impact acceleration that is only 66.31% of that of the NS structure.Additionally,the plateau stress of the proposed structure increases to 246.07% of that of the NS structure.This novel artificial structure provides a new design strategy for achieving superior energy absorption and impact resistance under repeated impact conditions.展开更多
With the increasing accuracy requirements of satellite magnetic detection missions,reducing low-frequency noise has become a key focus of satellite magnetic cleanliness technology.Traditional satellite magnetic simula...With the increasing accuracy requirements of satellite magnetic detection missions,reducing low-frequency noise has become a key focus of satellite magnetic cleanliness technology.Traditional satellite magnetic simulation methods have matured in static magnetic dipole simulations,but there is still significant room for optimization in the simulation and computation of low-frequency magnetic dipole models.This study employs the Gauss-Newton method and Fourier transform techniques for modeling and simulating low-frequency magnetic dipoles.Compared to the traditional particle swarm optimization(PSO)algorithm,this method achieves significant improvements,with errors reaching the order of10^(-13)%under noise-free conditions and maintaining an error level of less than 0.5%under 10%noise.Additionally,the use of Fourier transform and the Gauss-Newton method enables high-precision magnetic field frequency identification and rapid computation of the dipole position and magnetic moment,greatly enhancing the computational efficiency and accuracy of the model.展开更多
Brachinite is a group of primitive achondrites that enables investigating the evolution of asteroids not fully diff erentiated in the early stage of the solar system.Kumtag 061 is a new meteorite sample collected on O...Brachinite is a group of primitive achondrites that enables investigating the evolution of asteroids not fully diff erentiated in the early stage of the solar system.Kumtag 061 is a new meteorite sample collected on October 27,2019,in Kumtag Desert,Xinjiang Province,China.The oxygen isotope composition(δ^(18)O=5.086‰,δ^(17)O=2.396‰,Δ’^(17)O=-0.298‰)and petrologic and mineralogic analysis suggest Kumtag 061 is a heavy-impacted brachinite(S4-S5).The geochemical composition suggests Kumtag 061 represents a partial melting residue of the brachinite parent body.Based on the noble gas composition,the cosmic ray exposure age of Kumtag 061 is 60.9±9.0 Ma.Combined with the gas retention ages,they indicate a(series of)thermal events on the parent body of brachinites before Kumtag 061 was ejected into space.展开更多
Traditional simulation methods are unable to meet the requirements of lunar takeo simulations, such as high force output precision, low cost, and repeated use. Considering that cable-driven parallel mechanisms have th...Traditional simulation methods are unable to meet the requirements of lunar takeo simulations, such as high force output precision, low cost, and repeated use. Considering that cable-driven parallel mechanisms have the advantages of high payload to weight ratio, potentially large workspace, and high-speed motion, these mechanisms have the potential to be used for lunar takeo simulations. Thus, this paper presents a parallel mechanism driven by nine cables. The purpose of this study is to optimize the dimensions of the cable-driven parallel mechanism to meet dynamic workspace requirements under cable tension constraints. The dynamic workspace requirements are derived from the kinematical function requests of the lunar takeo simulation equipment. Experimental design and response surface methods are adopted for building the surrogate mathematical model linking the optimal variables and the optimization indices. A set of dimensional parameters are determined by analyzing the surrogate mathematical model. The volume of the dynamic workspace increased by 46% after optimization. Besides, a force control method is proposed for calculating output vector and sinusoidal forces. A force control loop is introduced into the traditional position control loop to adjust the cable force precisely, while controlling the cable length. The e ectiveness of the proposed control method is verified through experiments. A 5% vector output accuracy and 12 Hz undulation force output can be realized. This paper proposes a cable-driven parallel mechanism which can be used for lunar takeo simulation.展开更多
The effect of a guide vane installed at the elbow on flow-induced noise and vibration is investigated in the range of Reynolds numbers from 1.70×10^5 to 6.81×10^5, and the position of guide vane is determine...The effect of a guide vane installed at the elbow on flow-induced noise and vibration is investigated in the range of Reynolds numbers from 1.70×10^5 to 6.81×10^5, and the position of guide vane is determined by publications. The turbulent flow in the piping elbow is simulated with large eddy simulation （LES）. Following this, a hybrid method of combining LES and Lighthill＇s acoustic analogy theory is used to simulate the hydrodynamic noise and sound sources are solved as volume sources in code Actran. In addition, the flow-induced vibration of the piping elbow is investigated based on a fluid-structure interaction （FSI） code. The LES results indicate that the range of vortex zone in the elbow without the guide vane is larger than the case with the guide vane, and the guide vane is effective in reducing flow-induced noise and vibration in the 90° piping elbow at different Reynolds numbers.展开更多
High-pressure behaviour of orthorhombic MgSiO3 perovskite crystal is simulated by using the density functional theory and plane-wave pseudopotentials approach up to 120 GPa pressure at zero temperature. The lattice co...High-pressure behaviour of orthorhombic MgSiO3 perovskite crystal is simulated by using the density functional theory and plane-wave pseudopotentials approach up to 120 GPa pressure at zero temperature. The lattice constants and mass density of the MgSiO3 crystal as functions of pressure are computed, and the corresponding bulk modulus and bulk velocity are evaluated. Our theoretical results agree well with the high-pressure experimental data. A thermodynamic method is introduced to correct the temperature effect on the O-K first-principles results of bulk wave velocity, bulk modulus and mass density in lower mantle PIT range. Taking into account the temperature corrections, the corrected mass density, bulk modulus and bulk wave velocity of MgSiO3-perovskite are estimated from the first-principles results to be 2%, 4%, and 1% lower than the preliminary reference Earth model （PREM） profile, respectively, supporting the possibility of a pure perovskite lower mantle model.展开更多
Muon radiography is a promising technique for imaging the internal density structures of targets such as tunnels,pyramids,and volcanoes up to a scale of a few hundred meters by measuring the flux attenuation of cosmic...Muon radiography is a promising technique for imaging the internal density structures of targets such as tunnels,pyramids,and volcanoes up to a scale of a few hundred meters by measuring the flux attenuation of cosmic ray muons after they have traveled through these targets.In this study,we conducted experimental muon radiography of one of the volcanoes in the Wudalianchi area in Northeast China to image its internal density structure.The muon detector used in this study was composed of plastic scintillators and silicon photomultipliers.After approximately one and a half months of observing the crater and conduit of the Laoheishan volcano cone in Wudalianchi from September 23^(rd) to November 10^(th) 2019,more than 3 million muon tracks fulfilling the data selection criteria were collected.Based on the muon samples and high-resolution topography obtained through aerial photogrammetry using an unmanned aerial vehicle,a density image of the Laoheishan volcano cone was constructed.The results obtained in this experiment demonstrate the feasibility of using a radiography technique based on plastic scintillator detectors.To obtain the density distribution,we performed a detailed background analysis and found that low-energy charged particles dominated the background noise.Relatively higher densities were found near the surface of the volcanic cone,whereas relatively lower densities were found near the center of the volcanic cone.The experiment in this study is the first volcano muon tomography study performed in China.Our work provides an important reference for future research.展开更多
This paper performs first-principles calculations to study the structural, mechanical and electronic properties of the spinels ZnA1204, ZnGa2O4 and ZnCr2O4, using density functional theory with the plane-wave pseudopo...This paper performs first-principles calculations to study the structural, mechanical and electronic properties of the spinels ZnA1204, ZnGa2O4 and ZnCr2O4, using density functional theory with the plane-wave pseudopotential method. Our calculations are in good agreement with previous theoretical calculations and the available experimental data. The studies in this paper focus on the evolution of the mechanical properties of ZnAl2O4, ZnGa2O4 and ZnCr2O4 under hydrostatic pressure. The results show that the cubic phases of ZnAl2O4, ZnCa2O4 and ZnCr2O4 become unstable at about 50 GPa, 40 GPa and 25 GPa, respectively. From analysis of the band structure of the three compounds at equilibrium volume, it obtains a direct band gap of 4.35 eV for ZnA1204 and 0.89 cV for ZnCr2O4, while ZnGa2O4 has an indirect band gap of 2.73 eV.展开更多
Actuator plays a significant role in soft robotics.This paper proposed an ultralong stretchable soft actuator(US2A)with a variable and sizeable maximum elongation.The US2A is composed of a silicone rubber tube and a b...Actuator plays a significant role in soft robotics.This paper proposed an ultralong stretchable soft actuator(US2A)with a variable and sizeable maximum elongation.The US2A is composed of a silicone rubber tube and a bellows woven sleeve.The maximal extension can be conveniently regulated by just adjusting the wrinkles’initial angle of the bellows woven sleeve.The kinematics of US2A could be obtained by geometrically analyzing the structure of the bellows woven sleeve when the silicone rubber tube is inflated.Based on the principle of virtual work,the actuating models have been established:the pressure-elongation model and the pressure-force model.These models reflect the influence of the silicone tube’s shell thickness and material properties on the pneumatic muscle’s performance,which facilitates the optimal design of US2A for various working conditions.The experimental results showed that the maximum elongation of the US2A prototype is 257%,and the effective elongation could be variably regulated in the range of 0 and 257%.The proposed models were also verified by pressure-elongation and pressure-force experiments,with an average error of 5%and 2.5%,respectively.Finally,based on the US2A,we designed a pneumatic rehabilitation glove,soft arm robot,and rigid-soft coupling continuous robot,which further verified the feasibility of US2A as a soft driving component.展开更多
The Electromechanical Oxygen Regulator(EMOR)is a new type of aviator oxygen equipment.Positive pressure refers to the pressure difference between the breath pressure and the ambient pressure during pressurized oxygen ...The Electromechanical Oxygen Regulator(EMOR)is a new type of aviator oxygen equipment.Positive pressure refers to the pressure difference between the breath pressure and the ambient pressure during pressurized oxygen supply.The phenomenon of positive pressure fluctuation was believed to reduce the system performance.The current open-loop control method cannot solve this problem.In this paper,the mathematical model was established and main factors were analyzed.By combining experimental research and simulation calculation,it was determined that pressure fluctuation was caused by inlet pressure and diaphragm deformation together.With the increase of pulmonary ventilation volume,the influence of inlet pressure on fluctuation decreases gradually,while the proportion of diaphragm deformation increases rapidly.A closed-loop control strategy of Proportional Resonant with Feedforward Compensation(PRFC)was proposed to solve the problem and control parameters were obtained through co-simulation.The effectiveness of the control strategy was verified by experiments.The results show that the control strategy can enhance the anti-disturbance ability of the system and significantly reduce the pressure fluctuation range,which is beneficial to improving the overall system performance.展开更多
Due to outstanding mechanical properties, heat resistance, and relatively facile production,nanoclay reinforced epoxy composites(NCRE composites) have been suggested as candidate materials for use on external surfaces...Due to outstanding mechanical properties, heat resistance, and relatively facile production,nanoclay reinforced epoxy composites(NCRE composites) have been suggested as candidate materials for use on external surfaces of spacecraft residing in the low Earth orbit(LEO) environment. The resistance of the NCRE composites to bombardment by atomic oxygen(AO), a dominant component of the LEO environment, has been investigated. Four types of samples were used in this study. They were pure epoxy(0 wt% nanoclay content), and NCRE composites with different loadings of nanoclay—1 wt%, 2 wt%, and 4 wt%. Etch depths decreased with increasing nanoclay content, and for the 4 wt% samples it ranged from 28% to 37% compared to that of pure epoxy. X-ray photoelectron spectroscopy(XPS) indicates that after AO bombardment, relative area of C-C/C-H peak decreased,while the area of the C-O, ketones peaks increased, and the oxidation degree of surfaces increased. New carbon-related component carbonates were detected on nanoclay containing composite surfaces. Scanning electron microscopy indicates that aggregates formed on nanoclay-containing surfaces after AO bombardment. The sizes and densities of aggregates increased with nanoclay content. The combined erosion depths, XPS and SEM results indicate that although all the studied surfaces got eroded and oxidized after AO bombardment,the nanoclay containing composites showed better AO resistance compared to pure epoxy,because the produced aggregates on surface potentially act as a physical "shield", effectively retarding parts of the surface from further AO etching.展开更多
In a recent paper(Luo H et al.,2022),we found that the peak amplitudes of diurnal magnetic variations,measured during martian days(sols)at the InSight landing site,exhibited quasi Carrington-Rotation(qCR)periods at hi...In a recent paper(Luo H et al.,2022),we found that the peak amplitudes of diurnal magnetic variations,measured during martian days(sols)at the InSight landing site,exhibited quasi Carrington-Rotation(qCR)periods at higher eigenmodes of the natural orthogonal components(NOC);these results were based on~664 sols of magnetic field measurements.However,the source of these periodic variations is still unknown.In this paper we introduce the neutral-wind driven ionospheric dynamo current model(e.g.,Lillis et al.,2019)to investigate the source.Four candidates-the draped IMF,electron density/plasma density,the neutral densities,and the electron temperature in the ionosphere with artificial qCR periodicity,are applied in the modeling to find the main factor likely to be causing the observed surface magnetic field variations that exhibit the same qCR periods.Results show that the electron density/plasma density,which controls the total conductivity in the dynamo region,appears to account for the greatest part of the surface qCR variations;its contribution reaches about 67.6%.The draped IMF,the neutral densities,and the electron temperature account,respectively,for only about 12.9%,10.3%,and 9.2%of the variations.Our study implies that the qCR magnetic variations on the Martian surface are due primarily to variations of the dynamo currents caused by the electron density variations.We suggest also that the timevarying fields with the qCR period could be used to probe the Martian interior's electrical conductivity structure to a depth of at least 700 km.展开更多
Two kinds of different structured alumina-titania composite powders were used to prepare alumina matrix ceramics by microwave sintering. One was powder mixture of alumina and titania at a micron-submicron level, in wh...Two kinds of different structured alumina-titania composite powders were used to prepare alumina matrix ceramics by microwave sintering. One was powder mixture of alumina and titania at a micron-submicron level, in which fused-and-crushed alumina particles （micrometers） was clad with submicron-sized titania. The other was powder mixture of alumina and titania at nanometer-nanometer level, in which nano-sized alumina and nano-sized titania particles were homogeneously mixed by ball-milling and spray dried to prepare spherical alumina-titania composite powders. The effect of the microstructure of composite powders on microstructure and properties of microwave sintered alumina matrix ceramics were investigated. Nano-sized composite （NC） powder showed enhanced sintering behavior compared with micro-sized composite （MC） powders. The as- prepared NC ceramic had much denser, finer and more homogenous microstructure than MC ceramic. The mechanical properties of NC ceramic were significantly higher than that of MC ceramic, e.g. the flexural strength, Vickers hardness and fracture toughness of NC ceramic were 85.3%, 130.3% and 25.7% higher than that of MC ceramic, respectively. The improved mechanical properties of NC ceramic compared with that of MC ceramic were attributed to the enhanced densification and the finer and more homogeneous microstructure through the use of the nanostructured composite powders.展开更多
To solve the safe horizontal transportation by rail&road of remote sensing satellite problem in the process of unpredictable dynamic load,a high attenuation vibration isolation damper(hereinafter referred to as vi...To solve the safe horizontal transportation by rail&road of remote sensing satellite problem in the process of unpredictable dynamic load,a high attenuation vibration isolation damper(hereinafter referred to as vibration isolation damper)was developed.By simulation analysis and transportation test using satellite structural model and engineering prototype,validity and reliability of the vibration isolation damper was verified,which can meet the requirements of vibration and shock from various transportation conditions.展开更多
The effects of projectile/target impedance matching and projectile shape on energy,momentum transfer and projectile melting during collisions are investigated by numerical simulation.By comparing the computation resul...The effects of projectile/target impedance matching and projectile shape on energy,momentum transfer and projectile melting during collisions are investigated by numerical simulation.By comparing the computation results with the experimental results,the correctness of the calculation and the statistical method of momentum transfer coefficient is verified.Different shapes of aluminum,copper and heavy tungsten alloy projectiles striking aluminum,basalt,and pumice target for impacts up to 10 km/s are simulated.The influence mechanism of the shape of the projectile and projectile/target density on the momentum transfer was obtained.With an increase in projectile density and length-diameter ratio,the energy transfer time between the projectile and targets is prolonged.The projectile decelerates slowly,resulting in a larger cratering depth.The energy consumed by the projectile in the excavation stage increased,resulting in lower mass-velocity of ejecta and momentum transfer coefficient.The numerical simulation results demonstrated that for different projectile/target combinations,the higher the wave impedance of the projectile,the higher the initial phase transition velocity and the smaller the mass of phase transition.The results can provide theoretical guidance for kinetic impactor design and material selection.展开更多
The temperature-dependent coefficients of self-diffusion for liquid metals are simulated by molecular dynamics meth ods based on the embedded-atom-method （EAM） potential function. The simulated results show that a g...The temperature-dependent coefficients of self-diffusion for liquid metals are simulated by molecular dynamics meth ods based on the embedded-atom-method （EAM） potential function. The simulated results show that a good inverse linear relation exists between the natural logarithm of self-diffusion coefficients and temperature, though the results in the litera ture vary somewhat, due to the employment of different potential functions. The estimated activation energy of liquid metals obtained by fitting the Arrhenius formula is close to the experimental data. The temperature-dependent shear-viscosities obtained from the Stokes-Einstein relation in conjunction with the results of molecular dynamics simulation are generally consistent with other values in the literature.展开更多
The Ningdu basin,located in southern Jiangxi province of southwest China,is one of the Mesozoic basin groups which has exploration prospects for geothermal energy.A study on the detailed velocity structure of the Ning...The Ningdu basin,located in southern Jiangxi province of southwest China,is one of the Mesozoic basin groups which has exploration prospects for geothermal energy.A study on the detailed velocity structure of the Ningdu basin can provide important information for geothermal resource exploration.In this study,we deployed a dense seismic array in the Ningdu basin to investigate the 3D velocity structure and discuss implications for geothermal exploration and geological evolution.Based on the dense seismic array including 35 short-period(5 s-100 Hz)seismometers with an average interstation distance of~5 km,Rayleigh surface wave dispersion curves were extracted from the continuous ambient noise data for surface wave tomographic inversion.Group velocity tomography was conducted and the 3D S-wave velocity structure was inverted by the neighborhood algorithm.The results revealed obvious low-velocity anomalies in the center of the basin,consistent with the low-velocity Cretaceous sedimentary rocks.The basement and basin-controlling fault can also be depicted by the S-wave velocity anomalies.The obvious seismic interface is about 2 km depth in the basin center and decreases to 700 m depth near the basin boundary,suggesting spatial thickness variations of the Cretaceous sediment.The fault features of the S-wave velocity profile coincide with the geological cognition of the western boundary basincontrolling fault,which may provide possible upwelling channels for geothermal fluid.This study suggests that seismic tomography with a dense array is an effective method and can play an important role in the detailed investigations of sedimentary basins.展开更多
基金supported by National Natural Science Foundation of China(Grant Nos.12202068,12202087)China National Space Administration Preliminary Research Project(Grant Nos.KJSP2023020201,KJSP2020010402).
文摘It is widely known that the hypervelocity impact of orbital debris can cause serious damage to spacecraft,and enhancing the impact resistance is the great concern of spacecraft shield design.This paper provides a comprehensive overview of advances in the development of bumper materials for spacecraft shield applications.In particular,the protective mechanism and process of the bumper using different materials against hypervelocity impact are reviewed and discussed.The advantages and disadvantages of each material used in shield were discussed,and the performance under hypervelocity impact was given according to the specific configuration.This review provides the useful reference and basis for researchers and engineers to create bumper materials for spacecraft shield applications,and the contemporary challenges and future directions for bumper materials for spacecraft shield were presented.
基金supported by the State Key Research and Development Program,Special Gravity Wave(Grant No.2023YFC2206003)the Gansu Provincial Science and Technology Program Funding(Grant No.24JRRA499)+1 种基金the Natural Science Foundation of Shandong Province(Grant No.ZR2024QB219)the Lanzhou City Science and Technology Program Project(Grant No.2025-2-47)。
文摘Giant magnetoimpedance(GMI)sensors are increasingly employed in modern magnetic sensing technologies.However,improving the GMI performance of magnetic cores remains challenging due to intrinsic limitations in material properties and structural stability.In this work,we explore the use of Joule heating to enhance the GMI response of Fe_(20)Ni_(80)/Cu composite wires.By applying a current of 1.8 A for 10 min,notable improvements in magnetic domain uniformity and a reduction in domain spacing are observed.Under these conditions,GMI ratios reach 1870% in the non-diagonal mode and1147%in the diagonal mode,respectively,highlighting their potential for applications in high-precision weak magnetic field sensing.
文摘Large constellations have developed rapidly in recent years because of their unique advantages, but they will inevitably have a major negative impact on the space debris environment, leading to its deterioration. The key to mitigate the impact is the success rate and duration of the post-mission disposal(PMD) process. Aiming at solving this problem, this paper further studies the impact of large constellations on other space assets under different PMD strategies through simulation, and proposes corresponding strategies and suggestions for mitigation.According to One Web’s large constellation launch plan, the dangerous intersection of the large constellation with existing space assets at different stages of the constellations life cycle is calculated by simulation. Based on this, the influence of the large constellation operation on existing space assets at different times and strategies of PMD is analyzed. The conclusion shows that in the PMD stage, large constellations have the greatest impact on existing space assets;the PMD duration and number of satellites performing PMD at the same time are key factors to the degree of negative impact. The faster the PMD is, the less threat it poses to other spacecraft. More results and conclusions are still being analyzed.
文摘Achieving vibration isolation,lightweight design,and reusability under impact remains a critical challenge for thin-walled structures.When the goat skull is subjected to impact,both the outer wall of the sinus and the internal bony struts deform simultaneously to absorb energy and protect intracranial tissues.Inspired by this mechanism,we designed the goat sinus-inspired bio mimetic(GSIB) structure by mimicking the outer wall of the sinus and the internal pillar-like support system.The structure consists of dual coupling beams,including a set of inclined cantilever beams representing the sinus outer wall and vertical support beams simulating the internal bony struts.The GSIB structure was fabricated using Selective Laser Sintering(SLS) 3D printing technology,and its mechanical properties were investigated through a combination of quasi-static compression tests,vibration tests,impact tests,and finite element simulations.Under compressive loading,the inclined cantilever beams buckle to introduce a negative stiffness effect,while the vertical supports enhance overall stiffness.Leveraging the coupling effect between these two components,the structure achieves a long-stroke constant-force response,thereby delivering superior performance in energy absorption and vibration isolation.Additionally,the special deformation mode of the GSIB structure enables it to be reused under impact conditions.It is noteworthy that,compared to the negative stiffness(NS) structure with the same dimensions for repeated buffering proposed in previous studies,the GSIB structure demonstrates an energy absorption capacity reaching 214.3% of that of the NS structure,a reduction in isolation frequency to 58.5%,and an impact acceleration that is only 66.31% of that of the NS structure.Additionally,the plateau stress of the proposed structure increases to 246.07% of that of the NS structure.This novel artificial structure provides a new design strategy for achieving superior energy absorption and impact resistance under repeated impact conditions.
基金supported by the National Key Research and Development Program of China(Grant No.2023YFC2206003)。
文摘With the increasing accuracy requirements of satellite magnetic detection missions,reducing low-frequency noise has become a key focus of satellite magnetic cleanliness technology.Traditional satellite magnetic simulation methods have matured in static magnetic dipole simulations,but there is still significant room for optimization in the simulation and computation of low-frequency magnetic dipole models.This study employs the Gauss-Newton method and Fourier transform techniques for modeling and simulating low-frequency magnetic dipoles.Compared to the traditional particle swarm optimization(PSO)algorithm,this method achieves significant improvements,with errors reaching the order of10^(-13)%under noise-free conditions and maintaining an error level of less than 0.5%under 10%noise.Additionally,the use of Fourier transform and the Gauss-Newton method enables high-precision magnetic field frequency identification and rapid computation of the dipole position and magnetic moment,greatly enhancing the computational efficiency and accuracy of the model.
基金supported by the Project of Highlevel Innovative Talents of Guizhou Province(GCC[2022]017-1)the National Natural Science Foundation of China(grant no.42173046)。
文摘Brachinite is a group of primitive achondrites that enables investigating the evolution of asteroids not fully diff erentiated in the early stage of the solar system.Kumtag 061 is a new meteorite sample collected on October 27,2019,in Kumtag Desert,Xinjiang Province,China.The oxygen isotope composition(δ^(18)O=5.086‰,δ^(17)O=2.396‰,Δ’^(17)O=-0.298‰)and petrologic and mineralogic analysis suggest Kumtag 061 is a heavy-impacted brachinite(S4-S5).The geochemical composition suggests Kumtag 061 represents a partial melting residue of the brachinite parent body.Based on the noble gas composition,the cosmic ray exposure age of Kumtag 061 is 60.9±9.0 Ma.Combined with the gas retention ages,they indicate a(series of)thermal events on the parent body of brachinites before Kumtag 061 was ejected into space.
基金Supported by National Natural Science Foundation of China(Grant No.51405024)
文摘Traditional simulation methods are unable to meet the requirements of lunar takeo simulations, such as high force output precision, low cost, and repeated use. Considering that cable-driven parallel mechanisms have the advantages of high payload to weight ratio, potentially large workspace, and high-speed motion, these mechanisms have the potential to be used for lunar takeo simulations. Thus, this paper presents a parallel mechanism driven by nine cables. The purpose of this study is to optimize the dimensions of the cable-driven parallel mechanism to meet dynamic workspace requirements under cable tension constraints. The dynamic workspace requirements are derived from the kinematical function requests of the lunar takeo simulation equipment. Experimental design and response surface methods are adopted for building the surrogate mathematical model linking the optimal variables and the optimization indices. A set of dimensional parameters are determined by analyzing the surrogate mathematical model. The volume of the dynamic workspace increased by 46% after optimization. Besides, a force control method is proposed for calculating output vector and sinusoidal forces. A force control loop is introduced into the traditional position control loop to adjust the cable force precisely, while controlling the cable length. The e ectiveness of the proposed control method is verified through experiments. A 5% vector output accuracy and 12 Hz undulation force output can be realized. This paper proposes a cable-driven parallel mechanism which can be used for lunar takeo simulation.
基金Supported by the Independent Innovation Foundation for National Defense of Huazhong University of Science and Technology(No.01-18-140019)
文摘The effect of a guide vane installed at the elbow on flow-induced noise and vibration is investigated in the range of Reynolds numbers from 1.70×10^5 to 6.81×10^5, and the position of guide vane is determined by publications. The turbulent flow in the piping elbow is simulated with large eddy simulation （LES）. Following this, a hybrid method of combining LES and Lighthill＇s acoustic analogy theory is used to simulate the hydrodynamic noise and sound sources are solved as volume sources in code Actran. In addition, the flow-induced vibration of the piping elbow is investigated based on a fluid-structure interaction （FSI） code. The LES results indicate that the range of vortex zone in the elbow without the guide vane is larger than the case with the guide vane, and the guide vane is effective in reducing flow-induced noise and vibration in the 90° piping elbow at different Reynolds numbers.
基金Supported by the National Natural Science Foundation of China under Grant Nos 40474033 and 10376024, and the Specialized Research Fund for the Doctoral Program of Higher Education of China under Grant No 20050613017.
文摘High-pressure behaviour of orthorhombic MgSiO3 perovskite crystal is simulated by using the density functional theory and plane-wave pseudopotentials approach up to 120 GPa pressure at zero temperature. The lattice constants and mass density of the MgSiO3 crystal as functions of pressure are computed, and the corresponding bulk modulus and bulk velocity are evaluated. Our theoretical results agree well with the high-pressure experimental data. A thermodynamic method is introduced to correct the temperature effect on the O-K first-principles results of bulk wave velocity, bulk modulus and mass density in lower mantle PIT range. Taking into account the temperature corrections, the corrected mass density, bulk modulus and bulk wave velocity of MgSiO3-perovskite are estimated from the first-principles results to be 2%, 4%, and 1% lower than the preliminary reference Earth model （PREM） profile, respectively, supporting the possibility of a pure perovskite lower mantle model.
基金supported by the National Natural Science Foundation of China(Nos.41974064,42174076 and U1865206)Young Elite Scientists Sponsorship Program by CAST(No.2019QNRC001).
文摘Muon radiography is a promising technique for imaging the internal density structures of targets such as tunnels,pyramids,and volcanoes up to a scale of a few hundred meters by measuring the flux attenuation of cosmic ray muons after they have traveled through these targets.In this study,we conducted experimental muon radiography of one of the volcanoes in the Wudalianchi area in Northeast China to image its internal density structure.The muon detector used in this study was composed of plastic scintillators and silicon photomultipliers.After approximately one and a half months of observing the crater and conduit of the Laoheishan volcano cone in Wudalianchi from September 23^(rd) to November 10^(th) 2019,more than 3 million muon tracks fulfilling the data selection criteria were collected.Based on the muon samples and high-resolution topography obtained through aerial photogrammetry using an unmanned aerial vehicle,a density image of the Laoheishan volcano cone was constructed.The results obtained in this experiment demonstrate the feasibility of using a radiography technique based on plastic scintillator detectors.To obtain the density distribution,we performed a detailed background analysis and found that low-energy charged particles dominated the background noise.Relatively higher densities were found near the surface of the volcanic cone,whereas relatively lower densities were found near the center of the volcanic cone.The experiment in this study is the first volcano muon tomography study performed in China.Our work provides an important reference for future research.
基金supported by the Open Research Fund of the State Key Laboratory Breeding Base of Green Chemistry Synthesis Technology (Grant No. GCTKF2010017)the National Basic Research Program of China (Grant No. 2010CB731600)
文摘This paper performs first-principles calculations to study the structural, mechanical and electronic properties of the spinels ZnA1204, ZnGa2O4 and ZnCr2O4, using density functional theory with the plane-wave pseudopotential method. Our calculations are in good agreement with previous theoretical calculations and the available experimental data. The studies in this paper focus on the evolution of the mechanical properties of ZnAl2O4, ZnGa2O4 and ZnCr2O4 under hydrostatic pressure. The results show that the cubic phases of ZnAl2O4, ZnCa2O4 and ZnCr2O4 become unstable at about 50 GPa, 40 GPa and 25 GPa, respectively. From analysis of the band structure of the three compounds at equilibrium volume, it obtains a direct band gap of 4.35 eV for ZnA1204 and 0.89 cV for ZnCr2O4, while ZnGa2O4 has an indirect band gap of 2.73 eV.
基金National Natural Science Foundation of China(Grant No.U2013212)Key Research and Development Program of Zhejiang(Grant No.2021C04015)Fundamental Research Funds for the Provincial Universities of Zhejiang(Grant No.RF-C2019004)。
文摘Actuator plays a significant role in soft robotics.This paper proposed an ultralong stretchable soft actuator(US2A)with a variable and sizeable maximum elongation.The US2A is composed of a silicone rubber tube and a bellows woven sleeve.The maximal extension can be conveniently regulated by just adjusting the wrinkles’initial angle of the bellows woven sleeve.The kinematics of US2A could be obtained by geometrically analyzing the structure of the bellows woven sleeve when the silicone rubber tube is inflated.Based on the principle of virtual work,the actuating models have been established:the pressure-elongation model and the pressure-force model.These models reflect the influence of the silicone tube’s shell thickness and material properties on the pneumatic muscle’s performance,which facilitates the optimal design of US2A for various working conditions.The experimental results showed that the maximum elongation of the US2A prototype is 257%,and the effective elongation could be variably regulated in the range of 0 and 257%.The proposed models were also verified by pressure-elongation and pressure-force experiments,with an average error of 5%and 2.5%,respectively.Finally,based on the US2A,we designed a pneumatic rehabilitation glove,soft arm robot,and rigid-soft coupling continuous robot,which further verified the feasibility of US2A as a soft driving component.
文摘The Electromechanical Oxygen Regulator(EMOR)is a new type of aviator oxygen equipment.Positive pressure refers to the pressure difference between the breath pressure and the ambient pressure during pressurized oxygen supply.The phenomenon of positive pressure fluctuation was believed to reduce the system performance.The current open-loop control method cannot solve this problem.In this paper,the mathematical model was established and main factors were analyzed.By combining experimental research and simulation calculation,it was determined that pressure fluctuation was caused by inlet pressure and diaphragm deformation together.With the increase of pulmonary ventilation volume,the influence of inlet pressure on fluctuation decreases gradually,while the proportion of diaphragm deformation increases rapidly.A closed-loop control strategy of Proportional Resonant with Feedforward Compensation(PRFC)was proposed to solve the problem and control parameters were obtained through co-simulation.The effectiveness of the control strategy was verified by experiments.The results show that the control strategy can enhance the anti-disturbance ability of the system and significantly reduce the pressure fluctuation range,which is beneficial to improving the overall system performance.
基金the National Natu- ral Science Foundation of China (No.21473015 and No.41574101)the Fundamental Research Funds for the Central Universities (No.3132018233).
文摘Due to outstanding mechanical properties, heat resistance, and relatively facile production,nanoclay reinforced epoxy composites(NCRE composites) have been suggested as candidate materials for use on external surfaces of spacecraft residing in the low Earth orbit(LEO) environment. The resistance of the NCRE composites to bombardment by atomic oxygen(AO), a dominant component of the LEO environment, has been investigated. Four types of samples were used in this study. They were pure epoxy(0 wt% nanoclay content), and NCRE composites with different loadings of nanoclay—1 wt%, 2 wt%, and 4 wt%. Etch depths decreased with increasing nanoclay content, and for the 4 wt% samples it ranged from 28% to 37% compared to that of pure epoxy. X-ray photoelectron spectroscopy(XPS) indicates that after AO bombardment, relative area of C-C/C-H peak decreased,while the area of the C-O, ketones peaks increased, and the oxidation degree of surfaces increased. New carbon-related component carbonates were detected on nanoclay containing composite surfaces. Scanning electron microscopy indicates that aggregates formed on nanoclay-containing surfaces after AO bombardment. The sizes and densities of aggregates increased with nanoclay content. The combined erosion depths, XPS and SEM results indicate that although all the studied surfaces got eroded and oxidized after AO bombardment,the nanoclay containing composites showed better AO resistance compared to pure epoxy,because the produced aggregates on surface potentially act as a physical "shield", effectively retarding parts of the surface from further AO etching.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDB41010304)the National Key R&D Program of China (Grant No.2018YFC1503806)the National Natural Science Foundation of China (41874080, 41674168, 41874197)
文摘In a recent paper(Luo H et al.,2022),we found that the peak amplitudes of diurnal magnetic variations,measured during martian days(sols)at the InSight landing site,exhibited quasi Carrington-Rotation(qCR)periods at higher eigenmodes of the natural orthogonal components(NOC);these results were based on~664 sols of magnetic field measurements.However,the source of these periodic variations is still unknown.In this paper we introduce the neutral-wind driven ionospheric dynamo current model(e.g.,Lillis et al.,2019)to investigate the source.Four candidates-the draped IMF,electron density/plasma density,the neutral densities,and the electron temperature in the ionosphere with artificial qCR periodicity,are applied in the modeling to find the main factor likely to be causing the observed surface magnetic field variations that exhibit the same qCR periods.Results show that the electron density/plasma density,which controls the total conductivity in the dynamo region,appears to account for the greatest part of the surface qCR variations;its contribution reaches about 67.6%.The draped IMF,the neutral densities,and the electron temperature account,respectively,for only about 12.9%,10.3%,and 9.2%of the variations.Our study implies that the qCR magnetic variations on the Martian surface are due primarily to variations of the dynamo currents caused by the electron density variations.We suggest also that the timevarying fields with the qCR period could be used to probe the Martian interior's electrical conductivity structure to a depth of at least 700 km.
基金supports of the National Natural Science Foundation of China(Grant No. 51102074)the Science Foundation of Postdoctor of China (Grant No.20110490979)
文摘Two kinds of different structured alumina-titania composite powders were used to prepare alumina matrix ceramics by microwave sintering. One was powder mixture of alumina and titania at a micron-submicron level, in which fused-and-crushed alumina particles （micrometers） was clad with submicron-sized titania. The other was powder mixture of alumina and titania at nanometer-nanometer level, in which nano-sized alumina and nano-sized titania particles were homogeneously mixed by ball-milling and spray dried to prepare spherical alumina-titania composite powders. The effect of the microstructure of composite powders on microstructure and properties of microwave sintered alumina matrix ceramics were investigated. Nano-sized composite （NC） powder showed enhanced sintering behavior compared with micro-sized composite （MC） powders. The as- prepared NC ceramic had much denser, finer and more homogenous microstructure than MC ceramic. The mechanical properties of NC ceramic were significantly higher than that of MC ceramic, e.g. the flexural strength, Vickers hardness and fracture toughness of NC ceramic were 85.3%, 130.3% and 25.7% higher than that of MC ceramic, respectively. The improved mechanical properties of NC ceramic compared with that of MC ceramic were attributed to the enhanced densification and the finer and more homogeneous microstructure through the use of the nanostructured composite powders.
文摘To solve the safe horizontal transportation by rail&road of remote sensing satellite problem in the process of unpredictable dynamic load,a high attenuation vibration isolation damper(hereinafter referred to as vibration isolation damper)was developed.By simulation analysis and transportation test using satellite structural model and engineering prototype,validity and reliability of the vibration isolation damper was verified,which can meet the requirements of vibration and shock from various transportation conditions.
基金the National Natural Science Foundation of China(Grant Nos.62227901,12202068)the Civil Aerospace Pre-research Project(Grant No.D020304).
文摘The effects of projectile/target impedance matching and projectile shape on energy,momentum transfer and projectile melting during collisions are investigated by numerical simulation.By comparing the computation results with the experimental results,the correctness of the calculation and the statistical method of momentum transfer coefficient is verified.Different shapes of aluminum,copper and heavy tungsten alloy projectiles striking aluminum,basalt,and pumice target for impacts up to 10 km/s are simulated.The influence mechanism of the shape of the projectile and projectile/target density on the momentum transfer was obtained.With an increase in projectile density and length-diameter ratio,the energy transfer time between the projectile and targets is prolonged.The projectile decelerates slowly,resulting in a larger cratering depth.The energy consumed by the projectile in the excavation stage increased,resulting in lower mass-velocity of ejecta and momentum transfer coefficient.The numerical simulation results demonstrated that for different projectile/target combinations,the higher the wave impedance of the projectile,the higher the initial phase transition velocity and the smaller the mass of phase transition.The results can provide theoretical guidance for kinetic impactor design and material selection.
基金supported by the National Natural Science Foundation of China(Grant Nos.11032003 and 11221202)the National Basic Research Program of China(Grant No.2010CB731600)
文摘The temperature-dependent coefficients of self-diffusion for liquid metals are simulated by molecular dynamics meth ods based on the embedded-atom-method （EAM） potential function. The simulated results show that a good inverse linear relation exists between the natural logarithm of self-diffusion coefficients and temperature, though the results in the litera ture vary somewhat, due to the employment of different potential functions. The estimated activation energy of liquid metals obtained by fitting the Arrhenius formula is close to the experimental data. The temperature-dependent shear-viscosities obtained from the Stokes-Einstein relation in conjunction with the results of molecular dynamics simulation are generally consistent with other values in the literature.
基金supported by China Geological Survey (DD20190083, DD20221662)National Natural Science Foundation of China (41904044, 41974064, 42174076, 41874069)Youth Innovation Promotion Association CAS (2019330).
文摘The Ningdu basin,located in southern Jiangxi province of southwest China,is one of the Mesozoic basin groups which has exploration prospects for geothermal energy.A study on the detailed velocity structure of the Ningdu basin can provide important information for geothermal resource exploration.In this study,we deployed a dense seismic array in the Ningdu basin to investigate the 3D velocity structure and discuss implications for geothermal exploration and geological evolution.Based on the dense seismic array including 35 short-period(5 s-100 Hz)seismometers with an average interstation distance of~5 km,Rayleigh surface wave dispersion curves were extracted from the continuous ambient noise data for surface wave tomographic inversion.Group velocity tomography was conducted and the 3D S-wave velocity structure was inverted by the neighborhood algorithm.The results revealed obvious low-velocity anomalies in the center of the basin,consistent with the low-velocity Cretaceous sedimentary rocks.The basement and basin-controlling fault can also be depicted by the S-wave velocity anomalies.The obvious seismic interface is about 2 km depth in the basin center and decreases to 700 m depth near the basin boundary,suggesting spatial thickness variations of the Cretaceous sediment.The fault features of the S-wave velocity profile coincide with the geological cognition of the western boundary basincontrolling fault,which may provide possible upwelling channels for geothermal fluid.This study suggests that seismic tomography with a dense array is an effective method and can play an important role in the detailed investigations of sedimentary basins.
