The interactions between clouds and aerosols represent one of the largest uncertainties in assessing the Earth's radiation budget, highlighting the importance of research on the transition zone(TZ) within the clou...The interactions between clouds and aerosols represent one of the largest uncertainties in assessing the Earth's radiation budget, highlighting the importance of research on the transition zone(TZ) within the cloud-aerosol continuum.This study assesses the global distribution of TZ conditions, analyzes its optical characteristics, and determines the cloud or aerosol types most commonly associated with them, using the cloud-aerosol discrimination(CAD) score of the CloudAerosol Lidar with Orthogonal Polarization(CALIOP) instrument on the CALIPSO satellite. The CAD score classifies clouds and aerosols by the probability density functions of attenuated backscatter, total color ratio, volume depolarization ratio, altitude, and latitude. After applying several filters to avoid artifacts, the TZ was identified as those atmospheric layers that cannot be clearly classified as clouds or aerosols, layers within the no-confidence range(NCR) of the CAD score, and cirrus fringes. The optical characteristics of NCR layers exhibit two main clusters: Cluster 1, with properties between high-altitude ice clouds and aerosols(e.g., wispy cloud fragments), and Cluster 2, with properties between water clouds and aerosols at lower altitudes(e.g., large hydrated aerosols). Our results highlight the significant ubiquity of TZ conditions, which appear in 9.5% of all profiles and comprise 6.4% of the detected layers. Cluster 1 and cirrus-fringe layers predominate near the ITCZ and in mid-latitudes, whereas Cluster 2 layers are more frequent over the oceans along the central West African and East Asian coasts, where elevated smoke and dusty marine aerosols are common.展开更多
Some studies about road vector map change detection were done in this paper. Firstly, on the basis of old road vector data, the original high resolution remote sensing image was cut into segments. Then, gray analysis ...Some studies about road vector map change detection were done in this paper. Firstly, on the basis of old road vector data, the original high resolution remote sensing image was cut into segments. Then, gray analysis and edge extraction of those segments were done so that changes of roads could be detected. Finally, according to the vector data and gray information of roads which were not changed, road templates were extracted and saved automatically. This method was performed on the World View high resolution image of certain parts in the country. The detection result shows that detection correctness is 79.56% and completeness can reach 97.72%. Moreover, the extracted road templates are essentials for the template matching method of road extraction.展开更多
Background:Species-specific genotypic features,local neighbourhood interactions and resource supply strongly influence the tree stature and growth rate.In mixed-species forests,diversity-mediated biomass allocation ha...Background:Species-specific genotypic features,local neighbourhood interactions and resource supply strongly influence the tree stature and growth rate.In mixed-species forests,diversity-mediated biomass allocation has been suggested to be a fundamental mechanism underlying the positive biodiversity-productivity relationships.Empirical evidence,however,is rare about the impact of local neighbourhood diversity on tree characteristics analysed at a very high level of detail.To address this issue we analysed these effects on the individual-tree crown architecture and tree productivity in a mature mixed forest in northern Germany.Methods:Our analysis considers multiple target tree species across a local neighbourhood species richness gradient ranging from 1 to 4.We applied terrestrial laser scanning to quantify a large number of individual mature trees(N=920)at very high accuracy.We evaluated two different neighbour inclusion approaches by analysing both a fixed radius selection procedure and a selection based on overlapping crowns.Results and conclusions:We show that local neighbourhood species diversity significantly increases crown dimension and wood volume of target trees.Moreover,we found a size-dependency of diversity effects on tree productivity(basal area and wood volume increment)with positive effects for large-sized trees(diameter at breast height(DBH)>40 cm)and negative effects for small-sized(DBH<40 cm)trees.In our analysis,the neighbour inclusion approach has a significant impact on the outcome.For scientific studies and the validation of growth models we recommend a neighbour selection by overlapping crowns,because this seems to be the relevant scale at which local neighbourhood interactions occur.Because local neighbourhood diversity promotes individual-tree productivity in mature European mixed-species forests,we conclude that a small-scale species mixture should be considered in management plans.展开更多
A fuzzy ARTMAP classifier is adopted for a classification experiment of CBERS-2 imagery. The fundamental theory and processing about the algorithm are first introduced, followed with a land-use classification experime...A fuzzy ARTMAP classifier is adopted for a classification experiment of CBERS-2 imagery. The fundamental theory and processing about the algorithm are first introduced, followed with a land-use classification experiment in Shihezi County on CBERS-2 high resolution imagery. Three classifiers are compared: maximum likelihood classifier (MLC), error back propagation (BP) classifier, and fuzzy ARTMAP classifier. The comparison shows comparably better results for the fuzzy ARTMAP classifier, with overall classification accuracy of 9.9% and 4.6% higher than that of MLC and BP. The results also prove that the fuzzy ARTMAP classifier has better discernment in identifying bare soil on CBERS-2 imagery.展开更多
Wavelet theory is efficient as an adequate tool for analyzing single epoch GPS deformation signal. Wavelet analysis technique on gross error detection and recovery is advanced. Criteria of wavelet function choosing an...Wavelet theory is efficient as an adequate tool for analyzing single epoch GPS deformation signal. Wavelet analysis technique on gross error detection and recovery is advanced. Criteria of wavelet function choosing and Mallat decomposition levels decision are discussed. An effective deformation signal extracting method is proposed, that is wavelet noise reduction technique considering gross error recovery, which combines wavelet multi-resolution gross error detection results. Time position recognizing of gross errors and their repairing performance are realized. In the experiment, compactly supported orthogonal wavelet with short support block is more efficient than the longer one when discerning gross errors, which can obtain more finely analyses. And the shape of discerned gross error of short support wavelet is simpler than that of the longer one. Meanwhile, the time scale is easier to identify.展开更多
High resolution image fusion is a significant focus in the field of image processing. A new image fusion model is presented based on the characteristic level of empirical mode decomposition （EMD）. The intensity hue ...High resolution image fusion is a significant focus in the field of image processing. A new image fusion model is presented based on the characteristic level of empirical mode decomposition （EMD）. The intensity hue saturation （IHS） transform of the multi-spectral image first gives the intensity image. Thereafter, the 2D EMD in terms of row-column extension of the 1D EMD model is used to decompose the detailed scale image and coarse scale image from the high-resolution band image and the intensity image. Finally, a fused intensity image is obtained by reconstruction with high frequency of the high-resolution image and low frequency of the intensity image and IHS inverse transform result in the fused image. After presenting the EMD principle, a multi-scale decomposition and reconstruction algorithm of 2D EMD is defined and a fusion technique scheme is advanced based on EMD. Panchromatic band and multi-spectral band 3,2,1 of Quickbird are used to assess the quality of the fusion algorithm. After selecting the appropriate intrinsic mode function （IMF） for the merger on the basis of EMD analysis on specific row （column） pixel gray value series, the fusion scheme gives a fused image, which is compared with generally used fusion algorithms （wavelet, IHS, Brovey）. The objectives of image fusion include enhancing the visibility of the image and improving the spatial resolution and the spectral information of the original images. To assess quality of an image after fusion, information entropy and standard deviation are applied to assess spatial details of the fused images and correlation coefficient, bias index and warping degree for measuring distortion between the original image and fused image in terms of spectral information. For the proposed fusion algorithm, better results are obtained when EMD algorithm is used to perform the fusion experience.展开更多
A novel permutation-dependent Baire distance is introduced for multi-channel data. The optimal permutation is given by minimizing the sum of these pairwise distances. It is shown that for most practical cases the mini...A novel permutation-dependent Baire distance is introduced for multi-channel data. The optimal permutation is given by minimizing the sum of these pairwise distances. It is shown that for most practical cases the minimum is attained by a new gradient descent algorithm introduced in this article. It is of biquadratic time complexity: Both quadratic in number of channels and in size of data. The optimal permutation allows us to introduce a novel Baire-distance kernel Support Vector Machine (SVM). Applied to benchmark hyperspectral remote sensing data, this new SVM produces results which are comparable with the classical linear SVM, but with higher kernel target alignment.展开更多
Scalable video coding （SVC） is a newly emerging standard to be finalized as an extension of H.264/AVC. The most attractive characters in SVC are the inter layer prediction techniques, such as Intra_BL mode. But in c...Scalable video coding （SVC） is a newly emerging standard to be finalized as an extension of H.264/AVC. The most attractive characters in SVC are the inter layer prediction techniques, such as Intra_BL mode. But in current SVC scheme, a uniform up-sampling filter （UUSF） is employed to magnify all components of an image, which will be very inefficient and result in a lot of redundant computational complexity. To overcome this, we propose an efficient component-adaptive up-sampling filter （CAUSF） for inter layer interpolation. In CAUSF, one character of human vision system is considered, and different up- sampling filters are assigned to different components. In particular, the six-tap FIR filter used in UUSF is kept and assigned for luminance component. But for chrominance components, a new four-tap FIR filter is used. Experimental results show that CAUSF maintains the performances of coded bit-rate and PSNR-Y without any noticeable loss, and provides significant reduction in computational complexity.展开更多
基金funded through project NUBOLOSYTI (PID2023149972NB-100) of the Spanish Ministry of Science and Innovation (MICINN)supported by an IFUdG 2022 fellowship。
文摘The interactions between clouds and aerosols represent one of the largest uncertainties in assessing the Earth's radiation budget, highlighting the importance of research on the transition zone(TZ) within the cloud-aerosol continuum.This study assesses the global distribution of TZ conditions, analyzes its optical characteristics, and determines the cloud or aerosol types most commonly associated with them, using the cloud-aerosol discrimination(CAD) score of the CloudAerosol Lidar with Orthogonal Polarization(CALIOP) instrument on the CALIPSO satellite. The CAD score classifies clouds and aerosols by the probability density functions of attenuated backscatter, total color ratio, volume depolarization ratio, altitude, and latitude. After applying several filters to avoid artifacts, the TZ was identified as those atmospheric layers that cannot be clearly classified as clouds or aerosols, layers within the no-confidence range(NCR) of the CAD score, and cirrus fringes. The optical characteristics of NCR layers exhibit two main clusters: Cluster 1, with properties between high-altitude ice clouds and aerosols(e.g., wispy cloud fragments), and Cluster 2, with properties between water clouds and aerosols at lower altitudes(e.g., large hydrated aerosols). Our results highlight the significant ubiquity of TZ conditions, which appear in 9.5% of all profiles and comprise 6.4% of the detected layers. Cluster 1 and cirrus-fringe layers predominate near the ITCZ and in mid-latitudes, whereas Cluster 2 layers are more frequent over the oceans along the central West African and East Asian coasts, where elevated smoke and dusty marine aerosols are common.
文摘Some studies about road vector map change detection were done in this paper. Firstly, on the basis of old road vector data, the original high resolution remote sensing image was cut into segments. Then, gray analysis and edge extraction of those segments were done so that changes of roads could be detected. Finally, according to the vector data and gray information of roads which were not changed, road templates were extracted and saved automatically. This method was performed on the World View high resolution image of certain parts in the country. The detection result shows that detection correctness is 79.56% and completeness can reach 97.72%. Moreover, the extracted road templates are essentials for the template matching method of road extraction.
基金LG was funded by the German Research Foundation(DFG 320926971)through the project“Analysis of diversity effects on above-groundproductivity in forests:advancing the mechanistic understanding of spatiotemporal dynamics in canopy space filling using mobile laser scanning”。
文摘Background:Species-specific genotypic features,local neighbourhood interactions and resource supply strongly influence the tree stature and growth rate.In mixed-species forests,diversity-mediated biomass allocation has been suggested to be a fundamental mechanism underlying the positive biodiversity-productivity relationships.Empirical evidence,however,is rare about the impact of local neighbourhood diversity on tree characteristics analysed at a very high level of detail.To address this issue we analysed these effects on the individual-tree crown architecture and tree productivity in a mature mixed forest in northern Germany.Methods:Our analysis considers multiple target tree species across a local neighbourhood species richness gradient ranging from 1 to 4.We applied terrestrial laser scanning to quantify a large number of individual mature trees(N=920)at very high accuracy.We evaluated two different neighbour inclusion approaches by analysing both a fixed radius selection procedure and a selection based on overlapping crowns.Results and conclusions:We show that local neighbourhood species diversity significantly increases crown dimension and wood volume of target trees.Moreover,we found a size-dependency of diversity effects on tree productivity(basal area and wood volume increment)with positive effects for large-sized trees(diameter at breast height(DBH)>40 cm)and negative effects for small-sized(DBH<40 cm)trees.In our analysis,the neighbour inclusion approach has a significant impact on the outcome.For scientific studies and the validation of growth models we recommend a neighbour selection by overlapping crowns,because this seems to be the relevant scale at which local neighbourhood interactions occur.Because local neighbourhood diversity promotes individual-tree productivity in mature European mixed-species forests,we conclude that a small-scale species mixture should be considered in management plans.
基金Supported by the National Social Development Research Program of China (No.2004DE100625).
文摘A fuzzy ARTMAP classifier is adopted for a classification experiment of CBERS-2 imagery. The fundamental theory and processing about the algorithm are first introduced, followed with a land-use classification experiment in Shihezi County on CBERS-2 high resolution imagery. Three classifiers are compared: maximum likelihood classifier (MLC), error back propagation (BP) classifier, and fuzzy ARTMAP classifier. The comparison shows comparably better results for the fuzzy ARTMAP classifier, with overall classification accuracy of 9.9% and 4.6% higher than that of MLC and BP. The results also prove that the fuzzy ARTMAP classifier has better discernment in identifying bare soil on CBERS-2 imagery.
基金Supported by Specialized Research Fundfor the Doctoral Programof Higher Educationin China(No.20040290503) Science and Technology Fundationof CUMT(No.2005B020) .
文摘Wavelet theory is efficient as an adequate tool for analyzing single epoch GPS deformation signal. Wavelet analysis technique on gross error detection and recovery is advanced. Criteria of wavelet function choosing and Mallat decomposition levels decision are discussed. An effective deformation signal extracting method is proposed, that is wavelet noise reduction technique considering gross error recovery, which combines wavelet multi-resolution gross error detection results. Time position recognizing of gross errors and their repairing performance are realized. In the experiment, compactly supported orthogonal wavelet with short support block is more efficient than the longer one when discerning gross errors, which can obtain more finely analyses. And the shape of discerned gross error of short support wavelet is simpler than that of the longer one. Meanwhile, the time scale is easier to identify.
文摘High resolution image fusion is a significant focus in the field of image processing. A new image fusion model is presented based on the characteristic level of empirical mode decomposition （EMD）. The intensity hue saturation （IHS） transform of the multi-spectral image first gives the intensity image. Thereafter, the 2D EMD in terms of row-column extension of the 1D EMD model is used to decompose the detailed scale image and coarse scale image from the high-resolution band image and the intensity image. Finally, a fused intensity image is obtained by reconstruction with high frequency of the high-resolution image and low frequency of the intensity image and IHS inverse transform result in the fused image. After presenting the EMD principle, a multi-scale decomposition and reconstruction algorithm of 2D EMD is defined and a fusion technique scheme is advanced based on EMD. Panchromatic band and multi-spectral band 3,2,1 of Quickbird are used to assess the quality of the fusion algorithm. After selecting the appropriate intrinsic mode function （IMF） for the merger on the basis of EMD analysis on specific row （column） pixel gray value series, the fusion scheme gives a fused image, which is compared with generally used fusion algorithms （wavelet, IHS, Brovey）. The objectives of image fusion include enhancing the visibility of the image and improving the spatial resolution and the spectral information of the original images. To assess quality of an image after fusion, information entropy and standard deviation are applied to assess spatial details of the fused images and correlation coefficient, bias index and warping degree for measuring distortion between the original image and fused image in terms of spectral information. For the proposed fusion algorithm, better results are obtained when EMD algorithm is used to perform the fusion experience.
文摘A novel permutation-dependent Baire distance is introduced for multi-channel data. The optimal permutation is given by minimizing the sum of these pairwise distances. It is shown that for most practical cases the minimum is attained by a new gradient descent algorithm introduced in this article. It is of biquadratic time complexity: Both quadratic in number of channels and in size of data. The optimal permutation allows us to introduce a novel Baire-distance kernel Support Vector Machine (SVM). Applied to benchmark hyperspectral remote sensing data, this new SVM produces results which are comparable with the classical linear SVM, but with higher kernel target alignment.
基金Supported by China Postdoctoral Science Foundation (Grant No. 20080430454)the Key Laboratory of Geo-informatics of State Bureau of Surveying and Mapping (Grant No. 200834)+1 种基金the National High-Tech Research and Development Program of China (Grant No. 2007AA12Z151)the National Basic Research Program of China (Grant No. 2006CB701303)
文摘Scalable video coding （SVC） is a newly emerging standard to be finalized as an extension of H.264/AVC. The most attractive characters in SVC are the inter layer prediction techniques, such as Intra_BL mode. But in current SVC scheme, a uniform up-sampling filter （UUSF） is employed to magnify all components of an image, which will be very inefficient and result in a lot of redundant computational complexity. To overcome this, we propose an efficient component-adaptive up-sampling filter （CAUSF） for inter layer interpolation. In CAUSF, one character of human vision system is considered, and different up- sampling filters are assigned to different components. In particular, the six-tap FIR filter used in UUSF is kept and assigned for luminance component. But for chrominance components, a new four-tap FIR filter is used. Experimental results show that CAUSF maintains the performances of coded bit-rate and PSNR-Y without any noticeable loss, and provides significant reduction in computational complexity.
