期刊文献+
共找到66篇文章
< 1 2 4 >
每页显示 20 50 100
Contributions of temperature and development state to the morphological variation of Ulva prolifera highlight the source management for green tides
1
作者 Kai-Ming Sun Changlin Li +2 位作者 Xiaoxiang Miao Shiliang Fan Zongling Wang 《Journal of Environmental Sciences》 2025年第12期351-360,共10页
Since 2007,the world's largest transregional green tides caused by Ulva prolifera have periodically occurred in China.The morphology of U.prolifera drastically changes during the drifting period,but the reason for... Since 2007,the world's largest transregional green tides caused by Ulva prolifera have periodically occurred in China.The morphology of U.prolifera drastically changes during the drifting period,but the reason for this phenomenon has still been under debate.Our results showed that temperature partly explained the changes in the morphology of U.prolifera,with a determining factor of 0.498.The ratio of highly branched thalli decreased as the temperature increased from around 25 to 30℃.Because morphological changes and physiological acclimation synergistically occurred in floating macroalgae,we hypothesized that if the morphology of U.prolifera is also determined by its development state,and the U.prolifea thalli with different development states should have distinct morphological and physiological traits even under the same environmental conditions.To test the hypothesis,we investigated the photosynthesis of U.prolifera and found a higher photosynthetic capacity but lower photoprotective capacity in algae that grew in the branched development state compared to those in the unbranched development state.Combined with other field observations and lab experiments,we suggest that both temperature and development state contribute to the morphological changes of U.prolifera.Given the varying trends of temperature during U.prolifera blooms in past eleven years and the initial occurrence of U.prolifera thalli in the branched development state in the source of algal bloom,we emphasize the need for source management of green tides. 展开更多
关键词 Ulva prolifera Morphology PHOTOSYNTHESIS DESICCATION Algal control
原文传递
Manipulating Scattering Performance of Offshore Structures in Water Waves Using a Wavelength Modulator
2
作者 Zhigang Zhang Yunzhou Li +4 位作者 Guanghua He Zhengxiao Luan Qiang Zhao Jiming Zhang Juncheng Wang 《哈尔滨工程大学学报(英文版)》 2025年第6期1141-1149,共9页
Through active manipulation of wavelengths,a structure exposed to a water-wave field can achieve a target hydrodynamic performance.Based on the form invariance of the governing equation for shallow water waves,wavelen... Through active manipulation of wavelengths,a structure exposed to a water-wave field can achieve a target hydrodynamic performance.Based on the form invariance of the governing equation for shallow water waves,wavelength modulators have been proposed using the space transformation method,which enables wavelength manipulation by distributing an anisotropic medium that incorporates water depth and gravitational acceleration within the modulation space.First,annular wavelength modulators were designed using the space transformation method to reduce or amplify the wavelength of shallow water waves.The control method of wavelength scaling ratios was investigated.In addition to plane waves,the wavelength modulator was applied to manipulate the wavelength of cylindrical waves.Furthermore,the interactions between a vertical cylinder and modulated water waves were studied.Results indicate that the wavelength can be arbitrarily reduced or amplified by adjusting the dimensional parameters of the modulator.Additionally,the modulator is effective for plane waves and cylindrical waves.This wavelength modulator can enable the structure to achieve the desired scattering characteristics at the target wavelength. 展开更多
关键词 Water-wave field Scattering performance Space transformation method Wavelength modulator Anisotropic medium
在线阅读 下载PDF
A Review of the Applications of Digital Twin Technology in Marine Research
3
作者 LI Yun-zhou YU Ding-feng +11 位作者 YANG Lei ZHANG Lin-qiang CHEN Peng TAO Bang-yi WANG Wen-juan KONG Qing-lin DAI Ren-hai MIAO Bin CHEN Shi-zhe QI Sui-ping WANG Jun-cheng PAN De-lu 《China Ocean Engineering》 2025年第3期383-394,共12页
In recent years, with the development of technologies such as the Internet of Things(Io T), big data and cloud computing, digital twin technology has gradually been applied in marine research. The digital twin realize... In recent years, with the development of technologies such as the Internet of Things(Io T), big data and cloud computing, digital twin technology has gradually been applied in marine research. The digital twin realizes real-time monitoring, analysis and optimization of the state and behavior of a physical object or system by creating a virtual model. Research shows that digital twin technology has extensive application potential in ship design, marine resource development, marine equipment engineering design and optimization, marine ecological protection and early warning of disasters. Although digital twin technology has great potential in marine research, it also faces many challenges, including the complexity of data acquisition and processing, the accuracy and real-time performance of model construction, and the need for multidisciplinary cross-integration. An in-depth analysis of the technical bottlenecks and future development directions will provide an important reference for subsequent research and promote the further application and development of digital twin technology in marine research. 展开更多
关键词 digital twin marine research ship design resource development engineering optimization ecological protection
在线阅读 下载PDF
Design and Implementation of a 3D Ocean Virtual Reality and Visualization Engine 被引量:10
4
作者 CHEN Ge LI Bo +2 位作者 TIAN Fenglin JI Pengbo LI Wenqing 《Journal of Ocean University of China》 SCIE CAS 2012年第4期481-487,共7页
In this study,a 3D virtual reality and visualization engine for rendering the ocean,named VV-Ocean,is designed for marine applications.The design goals of VV-Ocean aim at high fidelity simulation of ocean environment,... In this study,a 3D virtual reality and visualization engine for rendering the ocean,named VV-Ocean,is designed for marine applications.The design goals of VV-Ocean aim at high fidelity simulation of ocean environment,visualization of massive and multidimensional marine data,and imitation of marine lives.VV-Ocean is composed of five modules,i.e.memory management module,resources management module,scene management module,rendering process management module and interaction management module.There are three core functions in VV-Ocean:reconstructing vivid virtual ocean scenes,visualizing real data dynamically in real time,imitating and simulating marine lives intuitively.Based on VV-Ocean,we establish a sea-land integration platform which can reproduce drifting and diffusion processes of oil spilling from sea bottom to surface.Environment factors such as ocean current and wind field have been considered in this simulation.On this platform oil spilling process can be abstracted as movements of abundant oil particles.The result shows that oil particles blend with water well and the platform meets the requirement for real-time and interactive rendering.VV-Ocean can be widely used in ocean applications such as demonstrating marine operations,facilitating maritime communications,developing ocean games,reducing marine hazards,forecasting the weather over oceans,serving marine tourism,and so on.Finally,further technological improvements of VV-Ocean are discussed. 展开更多
关键词 ocean rendering engine virtual reality visualization imitation of marine lives oil spilling simulation
在线阅读 下载PDF
Technical development of operational in-situ marine monitoring and research on its key generic technologies in China 被引量:5
5
作者 Yunzhou Li Juncheng Wang 《Acta Oceanologica Sinica》 SCIE CAS CSCD 2023年第10期117-126,共10页
In China,operational in-situ marine monitoring is the primary means of directly obtaining hydrological,meteorological,and oceanographic environmental parameters across sea areas,and it is essential for applications su... In China,operational in-situ marine monitoring is the primary means of directly obtaining hydrological,meteorological,and oceanographic environmental parameters across sea areas,and it is essential for applications such as forecast of marine environment,prevention and mitigation of disaster,exploitation of marine resources,marine environmental protection,and management of transportation safety.In this paper,we summarise the composition,development courses,and present operational status of three systems of operational in-situ marine monitoring,namely coastal marine automated network station,ocean data buoy and voluntary observing ship measuring and reporting system.Additionally,we discuss the technical development in these in-situ systems and achievements in the key generic technologies along with future development trends. 展开更多
关键词 marine observation technology operational in-situ marine monitoring C-MAN station ocean data buoy VOS measuring and reporting system achievements in the key technologies development trend
在线阅读 下载PDF
Monte Carlo Simulation of in situ Gamma-Spectra Recorded by Na I(Tl) Detector in the Marine Environment 被引量:4
6
作者 WANG Yiming ZHANG Yingying +4 位作者 WU Ning WU Bingwei LIU Yan CAO Xuan WANG Qian 《Journal of Ocean University of China》 SCIE CAS 2015年第3期471-474,共4页
To develop a NaI (T1) detector for in situ radioactivity monitoring in the marine environment and enhance the confidence of the probability of the gamma-spectrum analysis, Monte Carlo simulations using the Monte Car... To develop a NaI (T1) detector for in situ radioactivity monitoring in the marine environment and enhance the confidence of the probability of the gamma-spectrum analysis, Monte Carlo simulations using the Monte Carlo N-Particle ( MNCP ) code were performed to provide the response spectra of some interested radionuclides and the background spectra originating from the natural radionuclides in seawater recorded by a NaI (T1) detector. A newly developed 75 mm × 75 mm NaI (T1) detector was calibrated using four reference radioactive sources 137Cs, 60Co, 40K and 54Mn in the laboratory before the field measurements in seawater. A simulation model was established for the detector immersed in seawater. The simulated spectra were all broadened with Gaussian pulses to reflect the statistical fluctuations and electrical noise in the real measurement. The simulated spectra show that the single-energy photons into the detector are mostly scattering low-energy photons and the high background in the low energy region mainly originates from the Compton effect of the high energy y-rays of natural radionuclides in seawater. The simulated background spectrum was compared with the experimental one recorded in field measurement and they seem to be in good agreement. The simulation method and spectra can be used for the accurate analysis of the filed measurement results of low concentration radioactivity in seawater. 展开更多
关键词 Monte Carlo simulation marine radioactivity monitoring NaI (T1) detector response spectra background spectra
在线阅读 下载PDF
Response of the western North Pacific subtropical ocean to the slow-moving super typhoon Nanmadol 被引量:3
7
作者 YANG Bing HOU Yijun LI Min 《Journal of Oceanology and Limnology》 SCIE CAS CSCD 2019年第3期938-956,共19页
Based on in-situ observation,satellite and reanalysis data,responses of the western North Pacific subtropical ocean(WNPSO)to the slow-moving category 5 super typhoon Nanmadol in 2011 are analyzed.The dynamical respons... Based on in-situ observation,satellite and reanalysis data,responses of the western North Pacific subtropical ocean(WNPSO)to the slow-moving category 5 super typhoon Nanmadol in 2011 are analyzed.The dynamical response is dominated by near-inertial currents and Ekman currents with maximum amplitude of 0.39m/s and 0.15m/s,respectively.The near-inertial currents concentrated around 100m below the sea surface and had an e-folding timescale of 4 days.The near-inertial energy propagated both upward and downward,and the vertical phase speed and wavelength were estimated to be 5m/h and 175m,respectively.The frequency of the near-inertial currents was blue-shifted near the surface and redshifted in ocean interior which may relate to wave propagation and/or background vorticity.The resultant surface cooling reaches-4.35℃ and happens when translation speed of Nanmadol is smaller than 3.0m/s.When Nanmadol reaches super typhoon intensity,the cooling is less than 3.0℃ suggesting that the typhoon translation speed plays important roles as well as typhoon intensity in surface cooling.Upwelling induced by the slow-moving typhoon wind leads to typhoon track confined cooling area and the right-hand bias of cooling is slight.The mixed layer cooling and thermocline warming are induced by wind-generated upwelling and vertical entrainment.Vertical entrainment also led to mixed layer salinity increase and thermocline salinity decrease,however,mixed layer salinity decrease occurs at certain stations as well.Our results suggest that typhoon translation speed is a vital factor responsible for the oceanic thermohaline and dynamical responses,and the small Mach number(slow typhoon translation speed)facilitate development of Ekman current and upwelling. 展开更多
关键词 OCEANIC RESPONSE western North Pacific SUBTROPICAL OCEAN South China Sea typhoon Nanmadol
在线阅读 下载PDF
The Influence of the Corrosion Product Layer Generated on the High Strength Low-Alloy Steels Welded by Underwater Wet Welding with Stainless Steel Electrodes in Seawater 被引量:3
8
作者 BAI Qiang ZOU Yan +3 位作者 KONG Xiangfeng GAO Yang DONG Sheng ZHANG Wei 《Journal of Ocean University of China》 SCIE CAS CSCD 2017年第1期49-56,共8页
The high strength low-alloy steels are welded by underwater wet welding with stainless steel electrodes. The microstructural and electrochemical corrosion study of base metal(BM), weld zone(WZ) and heat affected zone(... The high strength low-alloy steels are welded by underwater wet welding with stainless steel electrodes. The microstructural and electrochemical corrosion study of base metal(BM), weld zone(WZ) and heat affected zone(HAZ) are carried out to understand the influence of the corrosion product layer generated on the high strength low-alloy steels welded by underwater wet welding with stainless steel electrodes, methods used including, potentiodynamic polarization, electrochemical impedance spectroscopy(EIS) and scanning electron microscope(SEM). The results indicate that the WZ acts as a cathode and there is no corrosion product on it throughout the immersion period in seawater. The HAZ and BM acts as anodes. The corrosion rates of the HAZ and BM change with the immersion time increasing. In the initial immersion period, the HAZ has the highest corrosion rate because it has a coarse tempered martensite structure and the BM exhibites a microstructure with very fine grains of ferrite and pearlite. After a period of immersion, the BM has the highest corrosion rate. The reason is that the corrosion product layer on the HAZ is dense and has a better protective property while that on the BM is loose and can not inhibit the diffusion of oxygen. 展开更多
关键词 UNDERWATER WET welding CORROSION rate CORROSION product protective property
在线阅读 下载PDF
Idealized Experiments for Optimizing Model Parameters Using a 4D-Variational Method in an Intermediate Coupled Model of ENSO 被引量:5
9
作者 Chuan GAO Rong-Hua ZHANG +1 位作者 Xinrong WU Jichang SUN 《Advances in Atmospheric Sciences》 SCIE CAS CSCD 2018年第4期410-422,共13页
Large biases exist in real-time ENSO prediction, which can be attributed to uncertainties in initial conditions and model parameters. Previously, a 4D variational (4D-Vat) data assimilation system was developed for ... Large biases exist in real-time ENSO prediction, which can be attributed to uncertainties in initial conditions and model parameters. Previously, a 4D variational (4D-Vat) data assimilation system was developed for an intermediate coupled model (ICM) and used to improve ENSO modeling through optimized initial conditions. In this paper, this system is further applied to optimize model parameters. In the ICM used, one important process for ENSO is related to the anomalous temperature of subsurface water entrained into the mixed layer (Te), which is empirically and explicitly related to sea level (SL) variation. The strength of the thermocline effect on SST (referred to simply as "the thermocline effect") is represented by an introduced parameter, (l'Te. A numerical procedure is developed to optimize this model parameter through the 4D-Var assimilation of SST data in a twin experiment context with an idealized setting. Experiments having their initial condition optimized only, and having their initial condition plus this additional model parameter optimized, are compared. It is shown that ENSO evolution can be more effectively recovered by including the additional optimization of this parameter in ENSO modeling. The demonstrated feasibility of optimizing model parameters and initial conditions together through the 4D-Var method provides a modeling platform for ENSO studies. Further applications of the 4D-Vat data assimilation system implemented in the ICM are also discussed. 展开更多
关键词 intermediate coupled model ENSO modeling 4D-Var data assimilation system optimization of model param- eter and initial condition
在线阅读 下载PDF
Coupled modeling of land hydrology-regional climate including human carbon emission and water exploitation 被引量:4
10
作者 XIE Zheng-Hui ZENG Yu-Jin +4 位作者 XIA Jun QIN Pei-Hua JIA Bing-Hao ZOU Jing LIU Shuang 《Advances in Climate Change Research》 SCIE CSCD 2017年第2期68-79,共12页
Carbon emissions and water use are two major kinds of human activities. To reveal whether these two activities can modify the hydrological cycle and climate system in China, we conducted two sets of numerical experime... Carbon emissions and water use are two major kinds of human activities. To reveal whether these two activities can modify the hydrological cycle and climate system in China, we conducted two sets of numerical experiments using regional climate model RegCM4. In the first experiment used to study the climatic responses to human carbon emissions, the model were configured over entire China because the impacts of carbon emissions can be detected across the whole country. Results from the first experiment revealed that near-surface air temperature may significantly increase from 2007 to 2059 at a rate exceeding 0.1 ~C per decade in most areas across the country; southwestern and southeastern China also showed increasing trends in summer precipitation, with rates exceeding 10 mm per decade over the same period. In summer, only northern China showed an increasing trend of evapotranspiration, with increase rates ranging from 1 to 5 mm per decade; in winter, increase rates ranging from 1 to 5 mm per decade were observed in most regions. These effects are believed to be caused by global warming from human carbon emissions. In the second experiment used to study the effects of human water use, the model were configured over a limited region-- Haihe River Basin in the northern China, because compared with the human carbon emissions, the effects of human water use are much more local and regional, and the Haihe River Basin is the most typical region in China that suffers from both intensive human groundwater exploitation and surface water diversion. We incorporated a scheme of human water regulation into RegCM4 and conducted the second experiment. Model outputs showed that the groundwater table severely declined by -10 m in 1971-2000 through human groundwater over- exploitation in the basin; in fact, current conditions are so extreme that even reducing the pumping rate by half cannot eliminate the ground- water depletion cones observed in the area. Other hydrological and climatic elements, such as soil moisture, runoff generation, air humidity, precipitation, wind field, and soil and air temperature, were also significantly affected by anthropogenic water withdrawal and consumption, although these effects could be mitigated by reducing the amount of water drawn for extraction and application. 展开更多
关键词 China Hydrological cycle Climate change Anthropogenic activities Land--atmosphere coupling modeling
在线阅读 下载PDF
Research on Hydrodynamic Interference Suppression of Bottom-Mounted Monitoring Platform with Fairing Structure 被引量:3
11
作者 WANG Zhen ZHENG Yi +3 位作者 MAO Yu-feng WANG Ya-zhou YU Yan-ting LIU Hong-ning 《China Ocean Engineering》 SCIE EI CSCD 2018年第1期51-61,共11页
In the disturbance of unsteady flow field under the sea, the monitoring accuracy and precision of the bottom-mounted acoustic monitoring platform will decrease. In order to reduce the hydrodynamic interference, the pl... In the disturbance of unsteady flow field under the sea, the monitoring accuracy and precision of the bottom-mounted acoustic monitoring platform will decrease. In order to reduce the hydrodynamic interference, the platform wrapped with fairing structure and separated from the retrieval unit is described. The suppression effect evaluation based on the correlation theory of sound pressure and particle velocity for spherical wave in infinite homogeneous medium is proposed and the difference value between them is used to evaluate the hydrodynamic restraining performance of the bottom-mounted platform under far field condition. Through the sea test, it is indicated that the platform with sparse layers fairing structure(there are two layers for the fairing, in which the inside layer is 6-layers sparse metal net, and the outside layer is 1-layer polyester cloth, and then it takes sparse layers for short) has no attenuation in the sound pressure response to the sound source signal, but obvious suppression in the velocity response to the hydrodynamic noise. The effective frequency of the fairing structure is decreased below 10 Hz, and the noise magnitude is reduced by 10 d B. With the comparison of different fairing structures, it is concluded that the tighter fairing structure can enhance the performance of sound transmission and flow restraining. 展开更多
关键词 bottom-mounted FAIRING hydrodynamic interference acoustic impedance transmission loss
在线阅读 下载PDF
Current situation and trend of marine data buoy and monitoring network technology of China 被引量:14
12
作者 WANG Juncheng WANG Zhongqiu +2 位作者 WANG Yiming LIU Shixuan LI Yunzhou 《Acta Oceanologica Sinica》 SCIE CAS CSCD 2016年第2期1-10,共10页
Marine data buoy can provide a long-term, continuous, real-time, reliable data of ocean observation in a variety of complex marine environment. It is one of the most reliable, most effective and important means of oce... Marine data buoy can provide a long-term, continuous, real-time, reliable data of ocean observation in a variety of complex marine environment. It is one of the most reliable, most effective and important means of ocean monitoring technology. In this paper, the classification, main theory and technology system of marine data buoy are summarized. The typical technological breakthrough of the development of marine data buoy in recent years is summarized. The composition and application of marine monitoring network in China was introduced, and the gap between the technology of China's marine data buoy and the international advanced countries is compared.Combined on the situation and demand of China's current situation and needs, the development trend of marine data buoy and buoy monitoring network are expected. 展开更多
关键词 marine monitoring buoy marine observation monitoring network current situation and trend
在线阅读 下载PDF
Effects of process parameters on the depth-to-width ratio of flux-cored wire underwater wet welding 被引量:3
13
作者 韩焱飞 郭宁 +2 位作者 王芳 袁新 冯吉才 《China Welding》 EI CAS 2013年第1期35-40,共6页
The effects of process parameters on the depth-to-width ratio (D/W) of flux-cored wire underwater wet welding with a certain type of homemade .flux-cored wire are studied. It is found that the welding .speed, wire f... The effects of process parameters on the depth-to-width ratio (D/W) of flux-cored wire underwater wet welding with a certain type of homemade .flux-cored wire are studied. It is found that the welding .speed, wire feeding speed and torch oscillating amplitude hare significant effects on the dopth-to-width ratio (D/W) of welds. The D/W ratio of welds increases significantly with the increase of welding speed without the oscillating of welding torch. It increased (from 0. 14 to 0. 26 ) with the increase of wire feeding speed while the torch oscillating. And it decreased linearly with the increase of torch oscillating amplitude. However, the influelwe of oscillating speed, wire extension and welding voltage on the D/W ratio of welds was not obvious. 展开更多
关键词 flux-cored wire underwater wet welding depth-to-width ratio
在线阅读 下载PDF
Variational Reconstruction and Simulation Experiments of Sea Surface Wind Field for Ocean Data Buoy 被引量:2
14
作者 LI Yunzhou HUANG Sixun +4 位作者 YAN Shen SUN Xuejin QI Suiping WANG Zhongqiu TANG Xiaoyu 《Journal of Ocean University of China》 SCIE CAS CSCD 2024年第3期577-582,共6页
The sea surface wind field is an important physical parameter in oceanography and meteorology.With the continuous refinement of numerical weather prediction,air-sea interface materials,energy exchange,and other studie... The sea surface wind field is an important physical parameter in oceanography and meteorology.With the continuous refinement of numerical weather prediction,air-sea interface materials,energy exchange,and other studies,three-dimensional(3D)wind field distribution at local locations on the sea surface must be measured accurately.The current in-situ observation of sea surface wind parameters is mainly achieved through the installation of wind sensors on ocean data buoys.However,the results obtained from this single-point measurement method cannot reflect wind field distribution in a vertical direction above the sea surface.Thus,the present paper proposes a theoretical framework for the optimal inversion of the 3D wind field structure variation in the area where the buoy is located.The variation analysis method is first used to reconstruct the wind field distribution at different heights of the buoy,after which theoretical analysis verification and numerical simulation experiments are conducted.The results indicate that the use of variational methods to reconstruct 3D wind fields is significantly effective in eliminating disturbance errors in observations,which also verifies the correctness of the theoretical analysis of this method.The findings of this article can provide a reference for the layout optimization design of wind measuring instruments in buoy observation systems and also provide theoretical guidance for the design of new observation buoys in the future. 展开更多
关键词 moored buoy three-dimensional wind field distribution variational analysis wind field reconstruction
在线阅读 下载PDF
Validation methods of LAI products on the basis of scaling effect 被引量:2
15
作者 LIAO Yanran GAI Yingying +3 位作者 YAO Yanjuan FAN Wenjie XU Xiru YAN Binyan 《遥感学报》 EI CSCD 北大核心 2015年第1期134-142,共9页
Validation is one of the most important processes used to evaluate whether remotely sensed products can accurately reflect land surface configuration. Leaf Area Index( LAI) is a key parameter that represents vegetatio... Validation is one of the most important processes used to evaluate whether remotely sensed products can accurately reflect land surface configuration. Leaf Area Index( LAI) is a key parameter that represents vegetation canopy structures and growth conditions. Accurate evaluation of LAI products is the basis for applying them to land surface models. In this study,validation methods of coarse resolution MODIS and GLASS LAI products for heterogeneous pixels are established on the basis of the scaling effect and the scaling transformation. Considering spatial heterogeneity and growth difference,we transformed LAI from field measurements into a 1 km resolution scale with the aid of middle resolution images. We used average LAI and apparent LAI separately to validate the algorithms and products of MODIS and GLASS LAI. Two study areas,Hebi City and the Yingke Oasis,were selected for validation. Both MODIS and GLASS LAI products underestimate the true LAI in crop area. However,this result cannot be completely attributed to their algorithms. Instead,the primary reason is the heterogeneity and nonuniformity of the coarse pixels.Underestimation is evident in the Yingke Oasis,where heterogeneity is significant. Given that GLASS LAI product is the fusion of multiple LAI products,the mean value of this product is closer to the real situation,but the dynamic range is narrower than that of MODIS LAI product. 展开更多
关键词 VALIDATION leaf area index scaling effect scaling transformation
原文传递
Superhydrophobic diamond-coated Si nanowires for application of anti-biofouling 被引量:2
16
作者 Wenjing Long Haining Li +4 位作者 Bing Yang Nan Huang Lusheng Liu Zhigang Gai Xin Jiang 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2020年第13期1-8,共8页
The effect of the surface wettability of plasma-modified vertical Si nanowire array on the bio-fouling performance has been investigated.The Si nanowires prepared by a metal-assisted chemical etching technique exhibit... The effect of the surface wettability of plasma-modified vertical Si nanowire array on the bio-fouling performance has been investigated.The Si nanowires prepared by a metal-assisted chemical etching technique exhibit a super-hydrophilic surface.The treatment in CH4/H2 gas plasma environment leads to the decoration of graphite and diamond nanoparticles around Si nanowires.The detailed interface between graphite/diamond and Si nanowire was characterized by HRTEM technique.These surface-modified nanowire samples show an increased water contact angle with ultrananocrystalline diamond decorated ones being superhydrophobic.The immersion test in chlorella solution reveals that the diamond-coated Si nanowires possess the least attachment of chlorella in comparison with other Si nanowires.This result confirms that the coating of Si nanowires with diamond nanoparticles shows the best behavior in anti-biofouling.Importantly,this work provides a method fabricated super-hydrophobic surface for the application of biofouling prevention. 展开更多
关键词 Silicon nanowires Plasma treatment SUPER-HYDROPHOBIC DIAMOND
原文传递
Coupling of a Regional Climate Model with a Crop Development Model and Evaluation of the Coupled Model across China 被引量:1
17
作者 Jing ZOU Zhenghui XIE +4 位作者 Chesheng ZHAN Feng CHEN Peihua QIN Tong HU Jinbo XIE 《Advances in Atmospheric Sciences》 SCIE CAS CSCD 2019年第5期527-540,共14页
In this study, the CERES(Crop Estimation through Resource and Environment Synthesis) crop model was coupled with CLM3.5, the land module of the regional climate model RegCM4. The new coupled model was named RegCM4_CER... In this study, the CERES(Crop Estimation through Resource and Environment Synthesis) crop model was coupled with CLM3.5, the land module of the regional climate model RegCM4. The new coupled model was named RegCM4_CERES; and in this model, crop type was further divided into winter wheat, spring wheat, spring maize, summer maize, early rice, late rice,single rice, and other crop types based on each distribution fraction. The development of each crop sub-type was simulated by the corresponding crop model separately, with each planting and harvesting date. A simulation test using RegCM4_CERES was conducted across China from 1999 to 2008; a control test was also performed using the original RegCM4. Data on crop LAI(leaf area index), soil moisture at 10 cm depth, precipitation, and 2 m air temperature were collected to evaluate the performance of RegCM4_CERES. The evaluation provided comparison of single-station time series, regional distributions,seasonal variations, and statistical indices for RegCM4_CERES. The results revealed that the coupled model had an excellent ability to simulate the phonological changes and spatial variations in crops. The consideration of dynamic crop development in RegCM4_CERES corrected the wet bias of the original RegCM4 over North China and the cold bias over South China.However, the degree of improvement was minimal and the statistical indices for RegCM4_CERES were roughly the same as the original RegCM4. 展开更多
关键词 MODEL EVALUATION MODEL COUPLING CROP development MODEL regional CLIMATE MODEL CLIMATE modeling
在线阅读 下载PDF
Propagation modeling of ocean-scattered low-elevation GPS signals for maritime tropospheric duct inversion 被引量:1
18
作者 张金鹏 吴振森 +2 位作者 赵振维 张玉生 王波 《Chinese Physics B》 SCIE EI CAS CSCD 2012年第10期600-613,共14页
The maritime tropospheric duct is a low-altitude anomalous refractivity structure over the ocean surface,and it can significantly affect the performance of many shore-based/shipboard radar and communication systems.We... The maritime tropospheric duct is a low-altitude anomalous refractivity structure over the ocean surface,and it can significantly affect the performance of many shore-based/shipboard radar and communication systems.We propose the idea that maritime tropospheric ducts can be retrieved from ocean forward-scattered low-elevation global positioning system(GPS) signals.Retrieval is accomplished by matching the measured power patterns of the signals to those predicted by the forward propagation model as a function of the modified refractivity profile.On the basis of a parabolic equation method and bistatic radar equation,we develop such a forward model for computing the trapped propagation characteristics of an ocean forward-scattered GPS signal within a tropospheric duct.A new GPS scattering initial field is defined for this model to start the propagation modeling.A preliminary test on the performance of this model is conducted using measured data obtained from a 2009-experiment in the South China Sea.Results demonstrate that this model can predict GPS propagation characteristics within maritime tropospheric ducts and serve as a forward model for duct inversion. 展开更多
关键词 global positioning system ocean surface scattering propagation modeling tropospheric duct inversion
原文传递
Dynamic modeling and simulation test of a 60 kW PEMFC generation system 被引量:1
19
作者 Ying-ying ZHANG Ji-chang SUN +2 位作者 Ying ZHANG Xi LI Ouang-yi CAO 《Journal of Zhejiang University-Science A(Applied Physics & Engineering)》 SCIE EI CAS CSCD 2011年第6期475-482,共8页
In this paper,a 60 kW proton exchange membrane fuel cell(PEMFC) generation system is modeled in order to design the system parameters and investigate the static and dynamic characteristics for control purposes.To achi... In this paper,a 60 kW proton exchange membrane fuel cell(PEMFC) generation system is modeled in order to design the system parameters and investigate the static and dynamic characteristics for control purposes.To achieve an overall system model,the system is divided into five modules:the PEMFC stack(anode and cathode flows,membrane hydration,and stack voltage and power),cathode air supply(air compressor,supply manifold,cooler,and humidifier),anode fuel supply(hydrogen valve and humidifier),cathode exhaust exit(exit manifold and water return),and power conditioning(DC/DC and DC/AC) modules.Using a combination of empirical and physical modeling techniques,the model is developed to set the operation conditions of current,temperature,and cathode and anode gas flows and pressures,which have major impacts on system performance.The current model is based on a 60 kW PEMFC power plant designed for residential applications and takes account of the electrochemical and thermal aspects of chemical reactions within the stack as well as flows of reactants across the system.The simulation tests show that the system model can represent the static and dynamic characteristics of a 60 kW PEMFC generation system,which is mathematically simple for system parameters and control designs. 展开更多
关键词 Proton exchange membrane fuel cell(PEMFC) Generation system Dynamic simulation model Reactant flow
原文传递
Development of underwater wet welding experimental and divers training system 被引量:1
20
作者 贾传宝 陈波 +2 位作者 王芳 殷子强 袁新 《China Welding》 EI CAS 2012年第4期43-48,共6页
Compared to traditional welding methods, the underwater wet welding is special with many different characteristics due to the unique aqueous environment. It is conducted completely under water by divers and unique wel... Compared to traditional welding methods, the underwater wet welding is special with many different characteristics due to the unique aqueous environment. It is conducted completely under water by divers and unique welding technology is required in the special operation environment. The operating levels of the divers are the key factor to acquire high quality welded joints. In this paper, an underwater wet welding experimental and divers training system is developed to serve divers training and conducting welding experiments. The system consists of life support system, signals real-time monitoring system and communicating system, etc. An underwater butt welding experiment based on welding electrodes is conducted, and the system works well. It proves that the system can guarantee divers welding safely and successfully and high quality weld seam is expected to be acquired. 展开更多
关键词 underwater wet welding DIVERS training system MONITORING flux-cored arc welding
在线阅读 下载PDF
上一页 1 2 4 下一页 到第
使用帮助 返回顶部