This study performs single point incremental forming(SPIF)on two aluminum alloys(i.e.AA5754 and AA6061),and analyzes their post forming mechanical properties and microstructure evolution.The forming parameters namely ...This study performs single point incremental forming(SPIF)on two aluminum alloys(i.e.AA5754 and AA6061),and analyzes their post forming mechanical properties and microstructure evolution.The forming parameters namely wall angle(35°-55°),feed rate(1-4 m/min),spindle rotational speed(50-1000 r/min),and lubricant(grease and hydraulic oil)are varied to probe detailed processing effects.The pre-and post-SPIF mechanical properties and microstructures are characterized by conducting tensile tests and optical microscopy,respectively.It is shown that an increase in the wall angle,feed rate and rotational speed causes microscopic variations in the alloys such that the grains of AA5754 and the second phase particles of AA6061 elongate.As a result,the ultimate tensile strength of the formed parts is increased by 10%for AA5754 and by 8%for AA6061.And,the ductility of AA5754 is decreased from 22.9%to 12%and that of AA6061 is decreased from 16%to 10.7%.Regarding the lubricant effect,it is shown that the mechanical properties remain insensitive to the type of lubricant employed.These results indicate that SPIF processing modifies the microstructure of Al alloys in a way to enhance the strength at the cost of ductility.展开更多
Novel characteristics of graphene have captured great attention of researchers for energy technology applications.Incorporation of graphene related hybrid and composite materials have demonstrated high performance and...Novel characteristics of graphene have captured great attention of researchers for energy technology applications.Incorporation of graphene related hybrid and composite materials have demonstrated high performance and durability for fuel cell energy conversion devices.This article overviews graphene based materials for fuel cell technology applications such as electrodes additives,bipolar plates and proton conducting electrolyte membrane.The graphene dispersion over electrodes has revealed enhanced exposure of electrochemically active surface area for improved electro-catalytic activity towards fuel oxidation and oxidant reduction reactions.The issue of device stack durability and degraded performance due to corrosion of bipolar plates is discussed by incorporating graphene based materials.In proton exchange membrane devices,graphene as an electrolyte has shown an excellent performance towards high ionic conductivity and power density.The graphene incorporation in fuel cell devices has exhibited commendable performance and has bright future for commercial applications.展开更多
Organic-inorganic lead halide based perovskite solar cells(PSCs)have attracted unprecedented research interest over last decade.The high performance,combined with merits of low fabrication costs and ease of synthesis ...Organic-inorganic lead halide based perovskite solar cells(PSCs)have attracted unprecedented research interest over last decade.The high performance,combined with merits of low fabrication costs and ease of synthesis make PSCs promising alternate to state of the art silicon(Si)based solar cells.Howeve r,some inherent shortcomings of PSCs are hindering their market dominance over conventional photovoltaic technologies such as transmission loss of sub-bandgap photons,poor stability and hysteresis effects.Recently,use of rare earth(RE)ions doped nanomaterials in PSCs,has been identified as an effective means to address the aforementioned issues by expanding the range of absorption spectra minimizing the non-absorption loss of solar photons,enhancing light scattering and improving operational stability.This article reviews the recent progress in doping rare-earth(RE)ions in the building blocks of PSCs such as semiconductor electrodes and photoactive perovskite layers,and its use as a separate spectral conversion layer in PSCs.The effect of size,shape,constitution and concentration of RE-nanoparticles on the overall performance and device stability will be analyzed in detail.Moreover,we provide an outlook on the opportunities this newly developed field offers and the critical challenges faced in rationally and effectively using RE-ion-doped nanomaterials in PSCs for better operational stability and enhanced performance.展开更多
The paper introduces an electroencephalography(EEG) driven online position control scheme for a robot arm by utilizing motor imagery to activate and error related potential(ErrP) to stop the movement of the individual...The paper introduces an electroencephalography(EEG) driven online position control scheme for a robot arm by utilizing motor imagery to activate and error related potential(ErrP) to stop the movement of the individual links, following a fixed(pre-defined) order of link selection. The right(left)hand motor imagery is used to turn a link clockwise(counterclockwise) and foot imagery is used to move a link forward. The occurrence of ErrP here indicates that the link under motion crosses the visually fixed target position, which usually is a plane/line/point depending on the desired transition of the link across 3D planes/around 2D lines/along 2D lines respectively. The imagined task about individual link's movement is decoded by a classifier into three possible class labels: clockwise, counterclockwise and no movement in case of rotational movements and forward, backward and no movement in case of translational movements. One additional classifier is required to detect the occurrence of the ErrP signal, elicited due to visually inspired positional link error with reference to a geometrically selected target position. Wavelet coefficients and adaptive autoregressive parameters are extracted as features for motor imagery and ErrP signals respectively. Support vector machine classifiers are used to decode motor imagination and ErrP with high classification accuracy above 80%. The average time taken by the proposed scheme to decode and execute control intentions for the complete movement of three links of a robot is approximately33 seconds. The steady-state error and peak overshoot of the proposed controller are experimentally obtained as 1.1% and4.6% respectively.展开更多
Mg-Zn-Zr(ZK)alloys exhibit notably high mechanical strength amongst all magnesium alloy grades.However,due to the formation of low melting point Mg_3Zn_7-precipitates,these alloys are susceptible to hot cracking,thus ...Mg-Zn-Zr(ZK)alloys exhibit notably high mechanical strength amongst all magnesium alloy grades.However,due to the formation of low melting point Mg_3Zn_7-precipitates,these alloys are susceptible to hot cracking,thus compromising their metallurgical processing.The addition of rare earths to ZK alloys is an alternative to form higher melting point intermetallic compounds,speed up dynamic recrystallization,refine grain size,enhance corrosion resistance and extend the service temperature due to improved creep resistance.This work deals with the effect of Ce-base mischmetal addition on the hot rolling behaviour of as-cast ZK60 alloy.The microstructure investigation conducted using electron microscopy and X-Ray diffraction shows that precipitation of Mg_(7)Zn_(3) intermetallics occur during hot rolling,whereas no further precipitation is observed for the ZK60-Mm alloys.The fragmentation of the intermetallic compounds occur during hot rolling and finer particles of Mg_(7)Zn_(3) are observed for the ZK60,whereas Mg_(7)Zn_(3) and Mg Zn_(2) Ce intermetallics are formed in the alloy modified with mischmetal addition.A higher fraction of dynamically recrystallized grains is observed for the ZK60-Mm in comparison to the ZK60.Continuous recrystallization takes place in ZK60 with the formation of sub-grains near to the intermetallics and the addition of mischmetal promotes the occurrence of discontinuous recrystallization with the nucleation of new grains close to the precipitates.The mechanical strength and,in particular,the ductility of the hot-rolled alloys are notably improved when compared to the same alloys in the as-cast condition.The mechanical strength is,however,higher for the ZK60 alloy.Less solid solution strengthening,softer Mg Zn_(2) Ce intermetallics and more extensive recrystallization contribute to reduce the mechanical strength of ZK60-Mm.Failure in both alloys are initiated at coarse intermetallics and propagate through intermetallic-rich regions.展开更多
A comprehensive theoretical study of entropy generation during electroki-netically driven transport of a nanofluid is of prime concern in the paper. The flow is considered to take place on a wavy channel under the act...A comprehensive theoretical study of entropy generation during electroki-netically driven transport of a nanofluid is of prime concern in the paper. The flow is considered to take place on a wavy channel under the action of an external transverse magnetic field and an external pressure gradient. Navier slips at the walls of the channel and thermal radiation have been taken into account in the study. The theoretical study has been carried out by developing a mathematical model by taking into account the effects of Joule heating, viscous dissipation, and the transverse magnetic field on heat transfer during the electrokinetic transport of the fluid. The derived analytical expres-sions have been computed numerically by considering the nanofluid as a mixture of blood and ferromagnetic nanoparticles. Variations in velocity, streaming potential, temperature distribution, Nusselt number, and Bejan number associated with the electrokinetic flow in capillaries have been investigated by the parametric variation method. The results have been presented graphically. The present investigation reveals that streaming potential decreases due to the Hall effect, while for the cooling capacity of the microsystem, we find an opposite behavior due to the Hall effect. The study further reveals that the fluidic temperature is reduced due to increase in the Hall current, and thereby thermal irreversibility of the system is reduced significantly. The results presented here can be considered as the approximate estimates of blood flow dynamics in capillaries during chemotherapy in cancer treatment.展开更多
Dissimilar joints(DSJs)of ferrous and non-ferrous metals have huge technological importance in the frontiers of newdesigns in new machineries and improved design of conventional systems.This investigation was undertak...Dissimilar joints(DSJs)of ferrous and non-ferrous metals have huge technological importance in the frontiers of newdesigns in new machineries and improved design of conventional systems.This investigation was undertaken to improve mechanicalproperties of joints of two dissimilar metals:one is Ti-based and the other is Fe-based.DSJs were processed using bonding pressurefrom1to9MPa in step of2MPa at750°C for60min.Properties of the DSJs of these two metals using different mechanisms andmethods were compared with the present research for verification.Experimental results from the diffusion bonding mechanism forjoining the dissimilar metals validated the improvement in properties.Superior mechanical properties of dissimilar-metals joints wereachieved mainly due to the third non-ferrous metallic foil,Ni of^200-?m thickness,which avoided the formation of brittleFe-Ti-based intermetallics in the diffusion zone.DSJs processed are able to achieve maximum strength of^560MPa along withsubstantial ductility of^11.9%,which is the best ever reported in the literatures so far.Work hardening effect was detected in theDSJs when the bonding was processed at5MPa and above.Bulging ratio of the non-ferrous metal(Ti-based)was much higher thanthat of the ferrous metal(SS)of the DSJs processed.SEM analysis was carried out to know the details of reaction zone,while XRDwas carried out to support the SEM results.Reasons for change in mechanical,physical,and fracture properties of the DSJs with theprocess parameter variations were clarified.展开更多
The influence of titanium alloy(Ti–5 Al–2.5 Sn) and commercially pure titanium(cp Ti) as fillers on dissimilar pulsed tungsten inert gas weldments of Ti–5 Al–2.5 Sn/cp Ti was investigated in terms of microstructur...The influence of titanium alloy(Ti–5 Al–2.5 Sn) and commercially pure titanium(cp Ti) as fillers on dissimilar pulsed tungsten inert gas weldments of Ti–5 Al–2.5 Sn/cp Ti was investigated in terms of microstructure, mechanical/nano-mechanical properties, and residual stresses. A partial martensitic transformation was observed in the weldments for all the welding conditions due to high heat input. The microstructure evolved in the FZ/cp Ti interfacial region was observed to be the most sensitive to the proportion of α stabilizer in the filler alloy. Furthermore, the addition of filler alloy improved the tensile properties and nano-mechanical response of the weld joint owing to the increased volume of metal in the weld joint. As compared to the Ti–5 Al–2.5 Sn wire, the use of cp Ti filler wire proved to be better in terms of energy absorbed during tensile and impact tests, tensile strength and ductility of the dissimilar welds. An asymmetrical residual stresses profile was observed close to the weld centerline, with high compressive stresses on the Ti–5 Al–2.5 Sn side for both the weldments obtained with and without filler wires. This was attributed to mainly the low thermal conductivity of Ti–5 Al–2.5 Sn. The presence of residual stresses also influenced the nano-hardness profile across the weldments.展开更多
Exchange coupling and magnetic properties of SmCo5 alloys containing different amounts of Sn were investigated in sintered magnets. X-ray diffraction analysis revealed the formation of Sm2Co17 and Sm2Co7 phases in SmC...Exchange coupling and magnetic properties of SmCo5 alloys containing different amounts of Sn were investigated in sintered magnets. X-ray diffraction analysis revealed the formation of Sm2Co17 and Sm2Co7 phases in SmCo5 matrix. Exchange coupling mechanism was evaluated by switching field distribution, dcdemagnetization and magnetization curves as function of reverse applied field. Energy product of 59.2 kJ/m3 （7.4 MGOe）, remanent magnetization to maximum magnetization ratio of 0.97 and remanence coercivity to intrinsic coercivity ratio of 1.75 were achieved for 0.2 at.% Sn.展开更多
With an extensive range of distinctive features at nano meter-scale thicknesses,two-dimensional(2D)materials drawn the attention of the scientific community.Despite tremendous advancements in exploratory research on 2...With an extensive range of distinctive features at nano meter-scale thicknesses,two-dimensional(2D)materials drawn the attention of the scientific community.Despite tremendous advancements in exploratory research on 2D materials,knowledge of 2D electrical transport and carrier dynamics still in its infancy.Thus,here we highlighted the electrical characteristics of 2D materials with electronic band structure,electronic transport,dielectric constant,carriers mobility.The atomic thinness of 2D materials makes substantially scaled field-effect transistors(FETs)with reduced short-channel effects conceivable,even though strong carrier mobility required for high performance,low-voltage device operations.We also discussed here about factors affecting 2D materials which easily enhanced the activity of those materials for various applications.Presently,Those 2D materials used in state-of-the-art electrical and optoelectronic devices because of the extensive nature of their electronic band structure.2D materials offer unprecedented freedom for the design of novel p-n junction device topologies in contrast to conventional bulk semiconductors.We also,describe the numerous 2D p-n junctions,such as homo junction and hetero junction including mixed dimensional junctions.Finally,we talked about the problems and potential for the future.展开更多
The microstructure and mechanical properties of butt-joints produced by linear friction stir welding of similar plates of as-cast ZK60 and modified ZK60 with 1.5 wt.%RE(ZK60-1.5 RE)are investigated.The thermomechanica...The microstructure and mechanical properties of butt-joints produced by linear friction stir welding of similar plates of as-cast ZK60 and modified ZK60 with 1.5 wt.%RE(ZK60-1.5 RE)are investigated.The thermomechanical affected zone is investigated in both advancing and retrieving sides,and the microstructure is compared to the base metal and the stirred zone.Electron backscattered diffraction measurements provide the average microstructural features of the transformed microstructure.The mechanical properties are assessed using hardness,tensile testing,and surface residual stress measured using X-ray diffraction.Higher torque and heat input are obtained for the ZK60-1.5 RE compared to the ZK60.The thermomechanical affected zone is notably larger for the ZK60 compared to the ZK60-1.5 RE.A gradient microstructure is formed in thermomechanical affected zones where deformed grains are progressively more recrystallised towards the stirred zone.There is no visible interface between the thermomechanical affected zone and the stirred zone.A fine and partially recrystallised microstructure is formed in the stirred zone.The retrieving side of the ZK60-1.5 RE has a slightly more refined microstructure compared to the other investigated zones.Anisotropy measured with increment in the maximum intensity of the(0001)increases towards to stirred zone.The formed microstructure is correlated with the role of twinning,recovery,static,and dynamic recrystallisation that can occur during friction stir welding.Twinning and grains with large misorientation spread are more pronounced in the thermomechanical affected zone and regions towards the base metal.Sharp low angle grain boundaries are observed towards the stirred zone.From refined recrystallised grains decorating the grain in the thermomechanical affected zone,a mosaic-like of low and high angle grain boundaries are observed in the stirred zone.The joints have comparable surface residual stresses.The friction stir welding improved the ductility and strength of the as-cast ZK60-1.5 RE alloy since the tensile samples fractured in the BM.展开更多
DRASTIC is a very simple and common model used for the assessment of groundwater to contamination.This model is widely used across the world in various hydrogeological environments for groundwater vulnerability assess...DRASTIC is a very simple and common model used for the assessment of groundwater to contamination.This model is widely used across the world in various hydrogeological environments for groundwater vulnerability assessment.The Ohio Water Well Association(OWWA)developed DRASTIC model in 1987.Over the years,several modifications have been made in this model as per the need of the regional assessment of groundwater to contamination.This model has fixed weights for its parameters and fixed ratings for the sub-parameters under the main parameters.The weights and ratings of DRASTIC parameters were fixed on the basis of Delphi network technique,which is the best technique for the consensus-building of experts,but it lacks scientific explanations.Over the years,several optimization techniques have been used to optimize these weights and ratings.This work intends to present a critical analysis of decision optimization techniques used to get the optimum values of weights and ratings.The inherent pros and cons and the optimization challenges associated with these techniques have also been discussed.The finding of this study is that the application of MCDA optimization techniques used to optimize the weights and ratings of DRASTIC model to assess the vulnerability of groundwater depend on the availability of hydrogeological data,the pilot study area and the level of required accuracy for earmarking the vulnerable regions.It is recommended that one must choose the appropriate MCDA technique for the particular region because unnecessary complex structure for optimization process takes more time,efforts,resources,and implementation costs.展开更多
This article investigates an unbiased analysis for the unsteady two-dimensional laminar flow of an incompressible, electrically and thermally conducting fluid across the space separated by two infinite rotating permea...This article investigates an unbiased analysis for the unsteady two-dimensional laminar flow of an incompressible, electrically and thermally conducting fluid across the space separated by two infinite rotating permeable walls.The influence of entropy generation, Hall and slip effects are considered within the flow analysis. The problem is modeled based on valid physical arguments and the unsteady system of dimensionless PDEs (partial differential equations) are solved with the help of Finite Difference Scheme. In the presence of pertinent parameters, the precise movement of the flow in terms of velocity, temperature, entropy generation rate, and Bejan numbers are presented graphically, which are parabolic in nature. Streamline profiles are also presented, which exemplify the accurate movement of the flow. The current study is one of the infrequent contributions to the existing literature as previous studies have not attempted to solve the system of high order non-linear PDEs for the unsteady flow with entropy generation and Hall effects in a permeable rotating channel. It is expected that the current analysis would provide a platform for solving the system of nonlinear PDEs of the other unexplored models that are associated to the two-dimensional unsteady flow in a rotating channel.展开更多
Powder mixture of ball-milled aluminium and functionalized multi-walled carbon nanotubes was compacted via spark plasma sintering （SPS） to study effects of sintering temperature and heating rate. An increase in sint...Powder mixture of ball-milled aluminium and functionalized multi-walled carbon nanotubes was compacted via spark plasma sintering （SPS） to study effects of sintering temperature and heating rate. An increase in sintering temperature led to an increase in crystallite size and density, whereas an increase in heating rate exerted the opposite effect. The crystallite size and relative density increased by 85.0% and 14.3%, respectively, upon increasing the sintering temperature from 400 to 600℃, whereas increasing the heating rate from 25 to 100 ℃/min led to respective reduction by 30.0% of crystallite size and 1.8% of relative density. The total punch displacement during SPS for the nanocomposite sintered at 600 ℃ （1.96 mm） was much higher than that of the sample sintered at 400 ℃ （1.02 mm） confirming positive impact of high sintering temperature on densification behaviour. The maximum improvement in mechanical properties was exhibited by the nanocomposite sintered at 600 ℃ at a heating rate of 50℃/min displaying microhardness of 81 4- 3.6 VHN and elastic modulus of 89 4- 5.3 GPa. The nanocomposites consolidated at 400 ℃ and 100 ℃/min, in spite of having relatively smaller crystallite size, exhibited poor mechanical properties indicating the detrimental effect of porosity on the mechanical properties.展开更多
A relevance vector machine(RVM)based demand prediction model is explored for efficient seismic fragility analysis(SFA)of a bridge structure.The proposed RVM model integrates both record-to-record variations of ground ...A relevance vector machine(RVM)based demand prediction model is explored for efficient seismic fragility analysis(SFA)of a bridge structure.The proposed RVM model integrates both record-to-record variations of ground motions and uncertainties of parameters characterizing the bridge model.For efficient fragility computation,ground motion intensity is included as an added dimension to the demand prediction model.To incorporate different sources of uncertainty,random realizations of different structural parameters are generated using Latin hypercube sampling technique.Mean fragility,along with its dispersions,is estimated based on the log-normal fragility model for different critical components of a bridge.The effectiveness of the proposed RVM model-based SFA of a bridge structure is elucidated numerically by comparing it with fragility results obtained by the commonly used SFA approaches,while considering the most accurate direct Monte Carlo simulation-based fragility estimates as the benchmark.The proposed RVM model provides a more accurate estimate of fragility than conventional approaches,with significantly less computational effort.In addition,the proposed model provides a measure of uncertainty in fragility estimates by constructing confidence intervals for the fragility curves.展开更多
This paper investigates the properties of displacement sensors based on polyaniline （PANI） films. About 1 wt% of PANI micropowder is mixed and stirred in a solution of 90 wt% water and 10 wt% alcohol at room tempera...This paper investigates the properties of displacement sensors based on polyaniline （PANI） films. About 1 wt% of PANI micropowder is mixed and stirred in a solution of 90 wt% water and 10 wt% alcohol at room temperature. The films of PANI axe deposited from solution by drop-casting on Ag electrodes, which are preliminary deposited on glass substrates. The thicknesses of the PANI films are in the range of 20 μm-80 μm. A displacement sensor with polyaniline film as an active material is designed and fabricated. The investigations showed that, on average, the AC resistance of the sensor decreases by 2 times and the capacitance accordingly increases by 1.6 times as the displacement changes in the range of 0 mm-0.5 mm. The polyaniline is the only active material of the displacement sensor. The resistance and capacitance of the PANI changes under the pressure of spring and elastic rubber, and this pressure is created by the downward movement of the micrometer.展开更多
The influence of self-heating on the millimeter-wave(mm-wave)and terahertz(THz)performance of double-drift region(DDR)impact avalanche transit time(IMPATT)sources based on silicon(Si)has been investigated in this pape...The influence of self-heating on the millimeter-wave(mm-wave)and terahertz(THz)performance of double-drift region(DDR)impact avalanche transit time(IMPATT)sources based on silicon(Si)has been investigated in this paper.The dependences of static and large-signal parameters on junction temperature are estimated using a non-sinusoidal voltage excited(NSVE)large-signal simulation technique developed by the authors,which is based on the quantum-corrected drift-diffusion(QCDD)model.Linear variations of static parameters and non-linear variations of large-signal parameters with temperature have been observed.Analytical expressions representing the temperature dependences of static and large-signal parameters of the diodes are developed using linear and 2nd degree polynomial curve fitting techniques,which will be highly useful for optimizing the thermal design of the oscillators.Finally,the simulated results are found to be in close agreement with the experimentally measured data.展开更多
In this paper we classify Kantowski-Sachs and Bianchi type Ⅲ space-times according to their teleparallel Killing vector fields using direct integration technique. It turns out that the dimension of the telepaxallel K...In this paper we classify Kantowski-Sachs and Bianchi type Ⅲ space-times according to their teleparallel Killing vector fields using direct integration technique. It turns out that the dimension of the telepaxallel Killing vector fields are 4 or 6, which are the same in numbers as in general relativity. In case of 4 the teleparallel Killing vector fields are multiple of the corresponding Killing vector fields in general relativity by some function of t. In the case of 6 Killing vector fields the metric functions become constants and the Killing vector fields in this case are exactly the same as in general relativity. Here we also discuss the Lie algebra in each case.展开更多
A so-called ghost dark energy was recently proposed to explain the present acceleration of the universe.The energy density of ghost dark energy,which originates from Veneziano ghost of Quantum Chromodynamics(QCD),in a...A so-called ghost dark energy was recently proposed to explain the present acceleration of the universe.The energy density of ghost dark energy,which originates from Veneziano ghost of Quantum Chromodynamics(QCD),in a time dependent background,can be written in the form,ρD=αH + βH^2 where H is the Hubble parameter.We investigate the generalized ghost dark energy(GGDE) model in the setup of loop quantum Cosmology(LQC) and Galileon Cosmology.We study the cosmological implications of the models.We also obtain the equation of state and the deceleration parameters and differential equations governing the evolution of this dark energy model for LQC and Galileon Cosmology.展开更多
In this paper we classify Bianchi type Ⅷ and IX space-times according to their teleparallel Killing vector fields in the teleparallel theory of gravitation by using a direct integration technique. It turns out that t...In this paper we classify Bianchi type Ⅷ and IX space-times according to their teleparallel Killing vector fields in the teleparallel theory of gravitation by using a direct integration technique. It turns out that the dimensions of the teleparallel Killing vector fields are either 4 or 5. From the above study we have shown that the Killing vector fields for Bianchi type Ⅷ and Ⅸ space-times in the context of teleparallel theory are different from that in general relativity.展开更多
文摘This study performs single point incremental forming(SPIF)on two aluminum alloys(i.e.AA5754 and AA6061),and analyzes their post forming mechanical properties and microstructure evolution.The forming parameters namely wall angle(35°-55°),feed rate(1-4 m/min),spindle rotational speed(50-1000 r/min),and lubricant(grease and hydraulic oil)are varied to probe detailed processing effects.The pre-and post-SPIF mechanical properties and microstructures are characterized by conducting tensile tests and optical microscopy,respectively.It is shown that an increase in the wall angle,feed rate and rotational speed causes microscopic variations in the alloys such that the grains of AA5754 and the second phase particles of AA6061 elongate.As a result,the ultimate tensile strength of the formed parts is increased by 10%for AA5754 and by 8%for AA6061.And,the ductility of AA5754 is decreased from 22.9%to 12%and that of AA6061 is decreased from 16%to 10.7%.Regarding the lubricant effect,it is shown that the mechanical properties remain insensitive to the type of lubricant employed.These results indicate that SPIF processing modifies the microstructure of Al alloys in a way to enhance the strength at the cost of ductility.
基金supported by Higher Education Commission(HEC)of Pakistan under the National Research Program for Universities(NRPU)with project No.5544/KPK/NRPU/R&D/HEC/2016
文摘Novel characteristics of graphene have captured great attention of researchers for energy technology applications.Incorporation of graphene related hybrid and composite materials have demonstrated high performance and durability for fuel cell energy conversion devices.This article overviews graphene based materials for fuel cell technology applications such as electrodes additives,bipolar plates and proton conducting electrolyte membrane.The graphene dispersion over electrodes has revealed enhanced exposure of electrochemically active surface area for improved electro-catalytic activity towards fuel oxidation and oxidant reduction reactions.The issue of device stack durability and degraded performance due to corrosion of bipolar plates is discussed by incorporating graphene based materials.In proton exchange membrane devices,graphene as an electrolyte has shown an excellent performance towards high ionic conductivity and power density.The graphene incorporation in fuel cell devices has exhibited commendable performance and has bright future for commercial applications.
基金the financial support provided by Dongguan University of Technology to carry out this extensive research work。
文摘Organic-inorganic lead halide based perovskite solar cells(PSCs)have attracted unprecedented research interest over last decade.The high performance,combined with merits of low fabrication costs and ease of synthesis make PSCs promising alternate to state of the art silicon(Si)based solar cells.Howeve r,some inherent shortcomings of PSCs are hindering their market dominance over conventional photovoltaic technologies such as transmission loss of sub-bandgap photons,poor stability and hysteresis effects.Recently,use of rare earth(RE)ions doped nanomaterials in PSCs,has been identified as an effective means to address the aforementioned issues by expanding the range of absorption spectra minimizing the non-absorption loss of solar photons,enhancing light scattering and improving operational stability.This article reviews the recent progress in doping rare-earth(RE)ions in the building blocks of PSCs such as semiconductor electrodes and photoactive perovskite layers,and its use as a separate spectral conversion layer in PSCs.The effect of size,shape,constitution and concentration of RE-nanoparticles on the overall performance and device stability will be analyzed in detail.Moreover,we provide an outlook on the opportunities this newly developed field offers and the critical challenges faced in rationally and effectively using RE-ion-doped nanomaterials in PSCs for better operational stability and enhanced performance.
基金supported by UGC Sponsored UPE-ⅡProject in Cognitive Science of Jadavpur University,Kolkata
文摘The paper introduces an electroencephalography(EEG) driven online position control scheme for a robot arm by utilizing motor imagery to activate and error related potential(ErrP) to stop the movement of the individual links, following a fixed(pre-defined) order of link selection. The right(left)hand motor imagery is used to turn a link clockwise(counterclockwise) and foot imagery is used to move a link forward. The occurrence of ErrP here indicates that the link under motion crosses the visually fixed target position, which usually is a plane/line/point depending on the desired transition of the link across 3D planes/around 2D lines/along 2D lines respectively. The imagined task about individual link's movement is decoded by a classifier into three possible class labels: clockwise, counterclockwise and no movement in case of rotational movements and forward, backward and no movement in case of translational movements. One additional classifier is required to detect the occurrence of the ErrP signal, elicited due to visually inspired positional link error with reference to a geometrically selected target position. Wavelet coefficients and adaptive autoregressive parameters are extracted as features for motor imagery and ErrP signals respectively. Support vector machine classifiers are used to decode motor imagination and ErrP with high classification accuracy above 80%. The average time taken by the proposed scheme to decode and execute control intentions for the complete movement of three links of a robot is approximately33 seconds. The steady-state error and peak overshoot of the proposed controller are experimentally obtained as 1.1% and4.6% respectively.
基金funding of FAPESP,processes 2010/11391-2,2011/09324-8,2011/19218-0FAPESP and CNPQ for the scholarshipsthe funding provided by CAPES(PROBRAL project 88881.143948/2017-01)。
文摘Mg-Zn-Zr(ZK)alloys exhibit notably high mechanical strength amongst all magnesium alloy grades.However,due to the formation of low melting point Mg_3Zn_7-precipitates,these alloys are susceptible to hot cracking,thus compromising their metallurgical processing.The addition of rare earths to ZK alloys is an alternative to form higher melting point intermetallic compounds,speed up dynamic recrystallization,refine grain size,enhance corrosion resistance and extend the service temperature due to improved creep resistance.This work deals with the effect of Ce-base mischmetal addition on the hot rolling behaviour of as-cast ZK60 alloy.The microstructure investigation conducted using electron microscopy and X-Ray diffraction shows that precipitation of Mg_(7)Zn_(3) intermetallics occur during hot rolling,whereas no further precipitation is observed for the ZK60-Mm alloys.The fragmentation of the intermetallic compounds occur during hot rolling and finer particles of Mg_(7)Zn_(3) are observed for the ZK60,whereas Mg_(7)Zn_(3) and Mg Zn_(2) Ce intermetallics are formed in the alloy modified with mischmetal addition.A higher fraction of dynamically recrystallized grains is observed for the ZK60-Mm in comparison to the ZK60.Continuous recrystallization takes place in ZK60 with the formation of sub-grains near to the intermetallics and the addition of mischmetal promotes the occurrence of discontinuous recrystallization with the nucleation of new grains close to the precipitates.The mechanical strength and,in particular,the ductility of the hot-rolled alloys are notably improved when compared to the same alloys in the as-cast condition.The mechanical strength is,however,higher for the ZK60 alloy.Less solid solution strengthening,softer Mg Zn_(2) Ce intermetallics and more extensive recrystallization contribute to reduce the mechanical strength of ZK60-Mm.Failure in both alloys are initiated at coarse intermetallics and propagate through intermetallic-rich regions.
基金Project supported by Science and Engineering Research Board(SERB)Department of Science and Technology,Government of India,New Delhi(No.CRG/2018/000153)
文摘A comprehensive theoretical study of entropy generation during electroki-netically driven transport of a nanofluid is of prime concern in the paper. The flow is considered to take place on a wavy channel under the action of an external transverse magnetic field and an external pressure gradient. Navier slips at the walls of the channel and thermal radiation have been taken into account in the study. The theoretical study has been carried out by developing a mathematical model by taking into account the effects of Joule heating, viscous dissipation, and the transverse magnetic field on heat transfer during the electrokinetic transport of the fluid. The derived analytical expres-sions have been computed numerically by considering the nanofluid as a mixture of blood and ferromagnetic nanoparticles. Variations in velocity, streaming potential, temperature distribution, Nusselt number, and Bejan number associated with the electrokinetic flow in capillaries have been investigated by the parametric variation method. The results have been presented graphically. The present investigation reveals that streaming potential decreases due to the Hall effect, while for the cooling capacity of the microsystem, we find an opposite behavior due to the Hall effect. The study further reveals that the fluidic temperature is reduced due to increase in the Hall current, and thereby thermal irreversibility of the system is reduced significantly. The results presented here can be considered as the approximate estimates of blood flow dynamics in capillaries during chemotherapy in cancer treatment.
文摘Dissimilar joints(DSJs)of ferrous and non-ferrous metals have huge technological importance in the frontiers of newdesigns in new machineries and improved design of conventional systems.This investigation was undertaken to improve mechanicalproperties of joints of two dissimilar metals:one is Ti-based and the other is Fe-based.DSJs were processed using bonding pressurefrom1to9MPa in step of2MPa at750°C for60min.Properties of the DSJs of these two metals using different mechanisms andmethods were compared with the present research for verification.Experimental results from the diffusion bonding mechanism forjoining the dissimilar metals validated the improvement in properties.Superior mechanical properties of dissimilar-metals joints wereachieved mainly due to the third non-ferrous metallic foil,Ni of^200-?m thickness,which avoided the formation of brittleFe-Ti-based intermetallics in the diffusion zone.DSJs processed are able to achieve maximum strength of^560MPa along withsubstantial ductility of^11.9%,which is the best ever reported in the literatures so far.Work hardening effect was detected in theDSJs when the bonding was processed at5MPa and above.Bulging ratio of the non-ferrous metal(Ti-based)was much higher thanthat of the ferrous metal(SS)of the DSJs processed.SEM analysis was carried out to know the details of reaction zone,while XRDwas carried out to support the SEM results.Reasons for change in mechanical,physical,and fracture properties of the DSJs with theprocess parameter variations were clarified.
文摘The influence of titanium alloy(Ti–5 Al–2.5 Sn) and commercially pure titanium(cp Ti) as fillers on dissimilar pulsed tungsten inert gas weldments of Ti–5 Al–2.5 Sn/cp Ti was investigated in terms of microstructure, mechanical/nano-mechanical properties, and residual stresses. A partial martensitic transformation was observed in the weldments for all the welding conditions due to high heat input. The microstructure evolved in the FZ/cp Ti interfacial region was observed to be the most sensitive to the proportion of α stabilizer in the filler alloy. Furthermore, the addition of filler alloy improved the tensile properties and nano-mechanical response of the weld joint owing to the increased volume of metal in the weld joint. As compared to the Ti–5 Al–2.5 Sn wire, the use of cp Ti filler wire proved to be better in terms of energy absorbed during tensile and impact tests, tensile strength and ductility of the dissimilar welds. An asymmetrical residual stresses profile was observed close to the weld centerline, with high compressive stresses on the Ti–5 Al–2.5 Sn side for both the weldments obtained with and without filler wires. This was attributed to mainly the low thermal conductivity of Ti–5 Al–2.5 Sn. The presence of residual stresses also influenced the nano-hardness profile across the weldments.
文摘Exchange coupling and magnetic properties of SmCo5 alloys containing different amounts of Sn were investigated in sintered magnets. X-ray diffraction analysis revealed the formation of Sm2Co17 and Sm2Co7 phases in SmCo5 matrix. Exchange coupling mechanism was evaluated by switching field distribution, dcdemagnetization and magnetization curves as function of reverse applied field. Energy product of 59.2 kJ/m3 （7.4 MGOe）, remanent magnetization to maximum magnetization ratio of 0.97 and remanence coercivity to intrinsic coercivity ratio of 1.75 were achieved for 0.2 at.% Sn.
文摘With an extensive range of distinctive features at nano meter-scale thicknesses,two-dimensional(2D)materials drawn the attention of the scientific community.Despite tremendous advancements in exploratory research on 2D materials,knowledge of 2D electrical transport and carrier dynamics still in its infancy.Thus,here we highlighted the electrical characteristics of 2D materials with electronic band structure,electronic transport,dielectric constant,carriers mobility.The atomic thinness of 2D materials makes substantially scaled field-effect transistors(FETs)with reduced short-channel effects conceivable,even though strong carrier mobility required for high performance,low-voltage device operations.We also discussed here about factors affecting 2D materials which easily enhanced the activity of those materials for various applications.Presently,Those 2D materials used in state-of-the-art electrical and optoelectronic devices because of the extensive nature of their electronic band structure.2D materials offer unprecedented freedom for the design of novel p-n junction device topologies in contrast to conventional bulk semiconductors.We also,describe the numerous 2D p-n junctions,such as homo junction and hetero junction including mixed dimensional junctions.Finally,we talked about the problems and potential for the future.
基金the funding of FAPESP,processes 2010/11391–2,2011/09324–8 and 2011/19218–0FAPESP and CNPQ for the scholarships+1 种基金the funding provided by CAPES(PROBRAL project 88881.143948/2017–01)The German Aerospace center(DLR)。
文摘The microstructure and mechanical properties of butt-joints produced by linear friction stir welding of similar plates of as-cast ZK60 and modified ZK60 with 1.5 wt.%RE(ZK60-1.5 RE)are investigated.The thermomechanical affected zone is investigated in both advancing and retrieving sides,and the microstructure is compared to the base metal and the stirred zone.Electron backscattered diffraction measurements provide the average microstructural features of the transformed microstructure.The mechanical properties are assessed using hardness,tensile testing,and surface residual stress measured using X-ray diffraction.Higher torque and heat input are obtained for the ZK60-1.5 RE compared to the ZK60.The thermomechanical affected zone is notably larger for the ZK60 compared to the ZK60-1.5 RE.A gradient microstructure is formed in thermomechanical affected zones where deformed grains are progressively more recrystallised towards the stirred zone.There is no visible interface between the thermomechanical affected zone and the stirred zone.A fine and partially recrystallised microstructure is formed in the stirred zone.The retrieving side of the ZK60-1.5 RE has a slightly more refined microstructure compared to the other investigated zones.Anisotropy measured with increment in the maximum intensity of the(0001)increases towards to stirred zone.The formed microstructure is correlated with the role of twinning,recovery,static,and dynamic recrystallisation that can occur during friction stir welding.Twinning and grains with large misorientation spread are more pronounced in the thermomechanical affected zone and regions towards the base metal.Sharp low angle grain boundaries are observed towards the stirred zone.From refined recrystallised grains decorating the grain in the thermomechanical affected zone,a mosaic-like of low and high angle grain boundaries are observed in the stirred zone.The joints have comparable surface residual stresses.The friction stir welding improved the ductility and strength of the as-cast ZK60-1.5 RE alloy since the tensile samples fractured in the BM.
文摘DRASTIC is a very simple and common model used for the assessment of groundwater to contamination.This model is widely used across the world in various hydrogeological environments for groundwater vulnerability assessment.The Ohio Water Well Association(OWWA)developed DRASTIC model in 1987.Over the years,several modifications have been made in this model as per the need of the regional assessment of groundwater to contamination.This model has fixed weights for its parameters and fixed ratings for the sub-parameters under the main parameters.The weights and ratings of DRASTIC parameters were fixed on the basis of Delphi network technique,which is the best technique for the consensus-building of experts,but it lacks scientific explanations.Over the years,several optimization techniques have been used to optimize these weights and ratings.This work intends to present a critical analysis of decision optimization techniques used to get the optimum values of weights and ratings.The inherent pros and cons and the optimization challenges associated with these techniques have also been discussed.The finding of this study is that the application of MCDA optimization techniques used to optimize the weights and ratings of DRASTIC model to assess the vulnerability of groundwater depend on the availability of hydrogeological data,the pilot study area and the level of required accuracy for earmarking the vulnerable regions.It is recommended that one must choose the appropriate MCDA technique for the particular region because unnecessary complex structure for optimization process takes more time,efforts,resources,and implementation costs.
基金Support of the National Natural Science Foundation of China under Grant Nos.51709191 and 51706149Key Laboratory of Advanced Reactor Engineering and Safety,Ministry of Education under Grant No.ARES-2018-10
文摘This article investigates an unbiased analysis for the unsteady two-dimensional laminar flow of an incompressible, electrically and thermally conducting fluid across the space separated by two infinite rotating permeable walls.The influence of entropy generation, Hall and slip effects are considered within the flow analysis. The problem is modeled based on valid physical arguments and the unsteady system of dimensionless PDEs (partial differential equations) are solved with the help of Finite Difference Scheme. In the presence of pertinent parameters, the precise movement of the flow in terms of velocity, temperature, entropy generation rate, and Bejan numbers are presented graphically, which are parabolic in nature. Streamline profiles are also presented, which exemplify the accurate movement of the flow. The current study is one of the infrequent contributions to the existing literature as previous studies have not attempted to solve the system of high order non-linear PDEs for the unsteady flow with entropy generation and Hall effects in a permeable rotating channel. It is expected that the current analysis would provide a platform for solving the system of nonlinear PDEs of the other unexplored models that are associated to the two-dimensional unsteady flow in a rotating channel.
基金supported financially by the‘‘SERC Funding’’ from Department of Science and Technology,Government of India(No.SERC/ET-0388/2012)
文摘Powder mixture of ball-milled aluminium and functionalized multi-walled carbon nanotubes was compacted via spark plasma sintering （SPS） to study effects of sintering temperature and heating rate. An increase in sintering temperature led to an increase in crystallite size and density, whereas an increase in heating rate exerted the opposite effect. The crystallite size and relative density increased by 85.0% and 14.3%, respectively, upon increasing the sintering temperature from 400 to 600℃, whereas increasing the heating rate from 25 to 100 ℃/min led to respective reduction by 30.0% of crystallite size and 1.8% of relative density. The total punch displacement during SPS for the nanocomposite sintered at 600 ℃ （1.96 mm） was much higher than that of the sample sintered at 400 ℃ （1.02 mm） confirming positive impact of high sintering temperature on densification behaviour. The maximum improvement in mechanical properties was exhibited by the nanocomposite sintered at 600 ℃ at a heating rate of 50℃/min displaying microhardness of 81 4- 3.6 VHN and elastic modulus of 89 4- 5.3 GPa. The nanocomposites consolidated at 400 ℃ and 100 ℃/min, in spite of having relatively smaller crystallite size, exhibited poor mechanical properties indicating the detrimental effect of porosity on the mechanical properties.
文摘A relevance vector machine(RVM)based demand prediction model is explored for efficient seismic fragility analysis(SFA)of a bridge structure.The proposed RVM model integrates both record-to-record variations of ground motions and uncertainties of parameters characterizing the bridge model.For efficient fragility computation,ground motion intensity is included as an added dimension to the demand prediction model.To incorporate different sources of uncertainty,random realizations of different structural parameters are generated using Latin hypercube sampling technique.Mean fragility,along with its dispersions,is estimated based on the log-normal fragility model for different critical components of a bridge.The effectiveness of the proposed RVM model-based SFA of a bridge structure is elucidated numerically by comparing it with fragility results obtained by the commonly used SFA approaches,while considering the most accurate direct Monte Carlo simulation-based fragility estimates as the benchmark.The proposed RVM model provides a more accurate estimate of fragility than conventional approaches,with significantly less computational effort.In addition,the proposed model provides a measure of uncertainty in fragility estimates by constructing confidence intervals for the fragility curves.
文摘This paper investigates the properties of displacement sensors based on polyaniline （PANI） films. About 1 wt% of PANI micropowder is mixed and stirred in a solution of 90 wt% water and 10 wt% alcohol at room temperature. The films of PANI axe deposited from solution by drop-casting on Ag electrodes, which are preliminary deposited on glass substrates. The thicknesses of the PANI films are in the range of 20 μm-80 μm. A displacement sensor with polyaniline film as an active material is designed and fabricated. The investigations showed that, on average, the AC resistance of the sensor decreases by 2 times and the capacitance accordingly increases by 1.6 times as the displacement changes in the range of 0 mm-0.5 mm. The polyaniline is the only active material of the displacement sensor. The resistance and capacitance of the PANI changes under the pressure of spring and elastic rubber, and this pressure is created by the downward movement of the micrometer.
文摘The influence of self-heating on the millimeter-wave(mm-wave)and terahertz(THz)performance of double-drift region(DDR)impact avalanche transit time(IMPATT)sources based on silicon(Si)has been investigated in this paper.The dependences of static and large-signal parameters on junction temperature are estimated using a non-sinusoidal voltage excited(NSVE)large-signal simulation technique developed by the authors,which is based on the quantum-corrected drift-diffusion(QCDD)model.Linear variations of static parameters and non-linear variations of large-signal parameters with temperature have been observed.Analytical expressions representing the temperature dependences of static and large-signal parameters of the diodes are developed using linear and 2nd degree polynomial curve fitting techniques,which will be highly useful for optimizing the thermal design of the oscillators.Finally,the simulated results are found to be in close agreement with the experimentally measured data.
文摘In this paper we classify Kantowski-Sachs and Bianchi type Ⅲ space-times according to their teleparallel Killing vector fields using direct integration technique. It turns out that the dimension of the telepaxallel Killing vector fields are 4 or 6, which are the same in numbers as in general relativity. In case of 4 the teleparallel Killing vector fields are multiple of the corresponding Killing vector fields in general relativity by some function of t. In the case of 6 Killing vector fields the metric functions become constants and the Killing vector fields in this case are exactly the same as in general relativity. Here we also discuss the Lie algebra in each case.
文摘A so-called ghost dark energy was recently proposed to explain the present acceleration of the universe.The energy density of ghost dark energy,which originates from Veneziano ghost of Quantum Chromodynamics(QCD),in a time dependent background,can be written in the form,ρD=αH + βH^2 where H is the Hubble parameter.We investigate the generalized ghost dark energy(GGDE) model in the setup of loop quantum Cosmology(LQC) and Galileon Cosmology.We study the cosmological implications of the models.We also obtain the equation of state and the deceleration parameters and differential equations governing the evolution of this dark energy model for LQC and Galileon Cosmology.
文摘In this paper we classify Bianchi type Ⅷ and IX space-times according to their teleparallel Killing vector fields in the teleparallel theory of gravitation by using a direct integration technique. It turns out that the dimensions of the teleparallel Killing vector fields are either 4 or 5. From the above study we have shown that the Killing vector fields for Bianchi type Ⅷ and Ⅸ space-times in the context of teleparallel theory are different from that in general relativity.
