The mechanical properties,microstructure and second phase precipitation behavior of flange forgings for high-pressure hydrogen storage vessels at different tempering temperatures(620–700℃)were studied.The results sh...The mechanical properties,microstructure and second phase precipitation behavior of flange forgings for high-pressure hydrogen storage vessels at different tempering temperatures(620–700℃)were studied.The results showed that when tempered at 620–680°C,the main microstructure of the test steel was tempered sorbite,and the main microstructure of tempered steel changed to martensite at 700℃.At 700℃,the dislocation density increased and some retained austenite existed.With the tempering temperature increasing,the yield strength showed a decreasing trend,the formation of fresh martensite made the tensile strength first decrease and then increase slightly,the impact energy at−40℃increased first and then decreased,and the impact energy at 660℃had the maximum value.The precipitates of MC type were mainly(Mo,V,Ti)C.The test steel had excellent strength and toughness matching at 660℃tempering,the tensile strength at different cross section locations was above 750 MPa,the impact energy was above 200 J at−40℃,and the relative percentage reduction of area(ZH2/ZN2)was above 75%at hydrogen environment of 6.3 MPa.展开更多
Increasing the hole expansion ratio is significant for developing high formability parts.Hole expansion tests were carried out on low carbon hot-rolled steel containing 0.11%Ti,0.072%Ti–0.03%Nb and 0.097%Ti–0.059%Nb...Increasing the hole expansion ratio is significant for developing high formability parts.Hole expansion tests were carried out on low carbon hot-rolled steel containing 0.11%Ti,0.072%Ti–0.03%Nb and 0.097%Ti–0.059%Nb,respectively.The effects of microstructure,texture,crack propagation behavior and second phase precipitation behavior on hole expansion ratio were investigated.The precipitation behavior of TiC and(Ti,Nb)C in austenite and ferrite in three groups of steel samples was calculated theoretically.The results showed that the hole expansion ratios of 0.11Ti,0.072Ti–0.03Nb and 0.097Ti–0.059Nb test steels were 51.73%,51.17%and 66.24%following simulated coiling at 600℃,respectively.The microstructure was mainly polygonal ferrite with a small amount of pearlite.The grain refinement of 0.097Ti–0.059Nb test steel and the low texture ratio of{110}//ND improved the hole expansion ratio.The low overall hole expansion ratio was due to the microstructure inhomogeneity.The microstructure uniformity was improved by the quenching and tempering treatment,and the hole expansion ratio of the three test steels was greatly increased.The fastest precipitation temperatures in the austenitic region of 0.11Ti,0.072Ti–0.03Nb and 0.097Ti–0.059Nb test steels were 880,860 and 830℃,while those in the ferrite region were 680,675 and 675℃,respectively.The addition of Nb element increased the volume free energy,so that the critical core size of the nucleation on the dislocation line increased,resulting in the decrease in the fastest precipitation temperature.展开更多
基金supported by the National Key research and Development Program of China(No.2022YFB4003001).
文摘The mechanical properties,microstructure and second phase precipitation behavior of flange forgings for high-pressure hydrogen storage vessels at different tempering temperatures(620–700℃)were studied.The results showed that when tempered at 620–680°C,the main microstructure of the test steel was tempered sorbite,and the main microstructure of tempered steel changed to martensite at 700℃.At 700℃,the dislocation density increased and some retained austenite existed.With the tempering temperature increasing,the yield strength showed a decreasing trend,the formation of fresh martensite made the tensile strength first decrease and then increase slightly,the impact energy at−40℃increased first and then decreased,and the impact energy at 660℃had the maximum value.The precipitates of MC type were mainly(Mo,V,Ti)C.The test steel had excellent strength and toughness matching at 660℃tempering,the tensile strength at different cross section locations was above 750 MPa,the impact energy was above 200 J at−40℃,and the relative percentage reduction of area(ZH2/ZN2)was above 75%at hydrogen environment of 6.3 MPa.
基金financially supported by the CITIC niobium steel development award Fund(M1656-2021)Central Iron and Steel Research Institute for its independent research and development fund(No.21G62460ZD).
文摘Increasing the hole expansion ratio is significant for developing high formability parts.Hole expansion tests were carried out on low carbon hot-rolled steel containing 0.11%Ti,0.072%Ti–0.03%Nb and 0.097%Ti–0.059%Nb,respectively.The effects of microstructure,texture,crack propagation behavior and second phase precipitation behavior on hole expansion ratio were investigated.The precipitation behavior of TiC and(Ti,Nb)C in austenite and ferrite in three groups of steel samples was calculated theoretically.The results showed that the hole expansion ratios of 0.11Ti,0.072Ti–0.03Nb and 0.097Ti–0.059Nb test steels were 51.73%,51.17%and 66.24%following simulated coiling at 600℃,respectively.The microstructure was mainly polygonal ferrite with a small amount of pearlite.The grain refinement of 0.097Ti–0.059Nb test steel and the low texture ratio of{110}//ND improved the hole expansion ratio.The low overall hole expansion ratio was due to the microstructure inhomogeneity.The microstructure uniformity was improved by the quenching and tempering treatment,and the hole expansion ratio of the three test steels was greatly increased.The fastest precipitation temperatures in the austenitic region of 0.11Ti,0.072Ti–0.03Nb and 0.097Ti–0.059Nb test steels were 880,860 and 830℃,while those in the ferrite region were 680,675 and 675℃,respectively.The addition of Nb element increased the volume free energy,so that the critical core size of the nucleation on the dislocation line increased,resulting in the decrease in the fastest precipitation temperature.
