Cyclops of zooplankton propagated excessively in eutrophic water body and could not be effectively inactivated by the conventional disinfections process like chlorination due to its stronger resistance to oxidation. I...Cyclops of zooplankton propagated excessively in eutrophic water body and could not be effectively inactivated by the conventional disinfections process like chlorination due to its stronger resistance to oxidation. In this paper, a full-scale study of chlorine dioxide preoxidation cooperating with routine clarification process for Cyclops removal was conducted in a waterworks. The experimental results were compared with that of the existing prechlorination process in several aspects: including the Cyclops removal efficiencies of water samples taken from the outlets of sedimentation tank and sand filter and the security of drinking water and so on. The results showed that chlorine dioxide might be more effective to inactivate Cyclops than chlorine and Cyclops could be thoroughly removed from water by pre-dosing chlorine dioxide process. The GC-MS examination and Ames test further showed that the sort and amount of organic substance in the treated water by chlorine dioxide preoxidation were evidently less than that of prechlorination and the mutagenicity of drinking water treated by pre-dosing chlorine dioxide was substantially reduced compared with prechlorination.展开更多
The operational performance of a full scale subsurface flow constructed wetland, which treated the mixed industrial and domestic wastewater with BOD 5/COD mean ratio of 0 33 at Shatian, Shenzhen City was studied. ...The operational performance of a full scale subsurface flow constructed wetland, which treated the mixed industrial and domestic wastewater with BOD 5/COD mean ratio of 0 33 at Shatian, Shenzhen City was studied. The constructed wetland system consists of screens, sump, pumping station, and primary settling basin, facultative pond, first stage wetland and secondary stage wetland. The designed treatment capacity is 5000 m 3/d, and the actual influent flow is in the range of <2000 to >10000 m 3/d. Under normal operational conditions, the final effluent quality well met the National Integrated Wastewater Discharge Standard(GB 8978\_1996), with the following parameters(mean values): COD 33 90 mg/L, BOD 5 7.65 mg/L, TSS 7.92 mg/L, TN 9.11 mg/L and TP 0 56 mg/L. Seven species of plants were selected to grow in the wetland: Reed, Sweetcane flower Silvergrass, Great Bulrush, Powdery Thalia and Canna of three colours. The growing season is a whole year round. The seasonal discrepancy could be observed and the plants growing in the wetland are vulnerable to lower temperature in winter. The recycling of the effluent in the first stage of the wetland system is an effective measure to improve the performance of the wetland system. The insufficient DO value in the wetland system not only had significant effect on pollutants removal in the wetland, but also was unfavourable to plant growth. The recycling of effluent to the inlet of wetland system and artificial pond to increase DO value of influent to the wetland is key to operate the subsurface constructed wetland steadily and effectively.展开更多
A novel treating technology for nitrogen removal from soybean wastewater was studied. The process for nitrogen removal was achieved by alternating aeration and mixing, combined with real\|time control strategies. Resu...A novel treating technology for nitrogen removal from soybean wastewater was studied. The process for nitrogen removal was achieved by alternating aeration and mixing, combined with real\|time control strategies. Results showed that the COD and total nitrogen removal rates are more than 90% and 92% at COD and total nitrogen loads of 1\^0-1\^2 kg COD/(kgMLSS·d) and 0\^20-0\^27 kg TN/(kgMLSS·d), respectively. In addition, it could improve sludge settling property. SVI value is less than 70 g/ml during the whole cycles. The method not only may be adapted to treat soybean wastewater with high nitrogen, but also may be applied to treat other high nitrogen wastewater.展开更多
Simultaneous biological phosphorus and nitrogen removal with enhanced anoxic phosphate uptake via nitrite was investigated in an anaerobic-aerobic-anoxic-aerobic sequencing batch reactor((AO)2 SBR). The system showed ...Simultaneous biological phosphorus and nitrogen removal with enhanced anoxic phosphate uptake via nitrite was investigated in an anaerobic-aerobic-anoxic-aerobic sequencing batch reactor((AO)2 SBR). The system showed stable phosphorus and nitrogen removal performance, and average removals for COD, TN and TP were 90%, 91% and 96%, respectively. The conditions of pH 7.5—8.0 and temperature 32℃ were found detrimental to nitrite oxidation bacteria but favorable to ammonia oxidizers, and the corresponding specific oxygen uptake rates(SOUR) for phase 1 and 2 of nitrification process were 0.7 and 15 mgO 2/(gVSS·h) in respect, which led to the nitrite accumulation in aerobic phase of(AO)2 SBR. Respiratory tests showed that 40 mgNO 2-N/L did not deteriorate the sludge activity drastically, and it implied that exposure of sludge to nitrite periodically enabled the biomass to have more tolerance capacity to resist the restraining effects from nitrite. In addition, batch tests were carried out and verified that denitrifying phosphorus accumulation organisms(DPAOs) could be enriched in a single sludge system coexisting with nitrifiers by introducing an anoxic phase in an anaerobic-aerobic SBR, and the ratio of the anoxic phosphate uptake capacity to aerobic phosphate uptake capacity was 45%. It was also found that nitrite(up to 20 mgNO 2-N/L) was not inhibitory to anoxic phosphate uptake and could serve as an electron acceptor like nitrate, but presented poorer efficiency compared with nitrate.展开更多
The inactivation of microorganisms by pulsed magnetic field was studied. It was improved that the application of electromagnetic pulses evidently causes a lethal effect on E. coli cells suspended in phosphate buffer s...The inactivation of microorganisms by pulsed magnetic field was studied. It was improved that the application of electromagnetic pulses evidently causes a lethal effect on E. coli cells suspended in phosphate buffer solution Na 2HPO 4/NaH 2PO 4(0 334/0 867 mmol/L). Experimental results indicated that the survivability(N/N 0; where N 0 and N are the number of cells survived per mill il iter before and after electromagnetic pulses application, respectively) of E. coli decreased with magnetic field intensity B and treatment time t. It was also found that the medium temperatures, the frequencies of pulse f, and the initial bacterial cell concentrations have determinate influences in destruction of E. coli cells by the application of magnetic pulses. The application of an magnetic intensity B=160 mT at pulses frequency f=62 kHz and treatment time t=16 h result in a considerable destruction levels of E. coli cells (N/N 0=10 -4 ). Possible mechanisms involved in sterilization of the magnetic field treatment were discussed. In order to shorten the treatment time, many groups of parallel inductive coil were used. The practicability test showed that the treatment time was shortened to 4 h with the application of three groups of parallel coil when the survivability of E.coli cells was less than 0 01%; and the power consumption was about 0 2 kWh /m 3.展开更多
A genetic algorithm(GA)-based new method is designed to evaluate thecircularity error of mechanical parts. The method uses the capability of nonlinear optimization ofGA to search for the optimal solution of circularit...A genetic algorithm(GA)-based new method is designed to evaluate thecircularity error of mechanical parts. The method uses the capability of nonlinear optimization ofGA to search for the optimal solution of circularity error. The finely-designed GA (FDGA)characterized dynamical bisexual recombination and Gaussian mutation. The mathematical model of thenonlinear problem is given. The implementation details in FDGA are described such as the crossoveror recombination mechanism which utilized a bisexual reproduction scheme and the elitist reservationmethod; and the adaptive mutation which used the Gaussian probability distribution to determine thevalues of the offspring produced by mutation mechanism. The examples are provided to verify thedesigned FDGA. The computation results indicate that the FDGA works very well in the field of formerror evaluation such as circularity evaluation.展开更多
The lifting technique is now the most popular tool for dealing with sampled-data controlsystems. However, for the robust stability problem the system norm is not preserved by the liftingas expected. And the result is ...The lifting technique is now the most popular tool for dealing with sampled-data controlsystems. However, for the robust stability problem the system norm is not preserved by the liftingas expected. And the result is generally conservative under the small gain condition. The reason forthe norm di?erence by the lifting is that the state transition operator in the lifted system is zero inthis case. A new approach to the robust stability analysis is proposed. It is to use an equivalentdiscrete-time uncertainty to replace the continuous-time uncertainty. Then the general discretizedmethod can be used for the robust stability problem, and it is not conservative. Examples are givenin the paper.展开更多
In order to improve nitrogen removal in anoxic/oxic(A/O) process effectively for treating domestic wastewaters, the influence factors, DO(dissolved oxygen), nitrate recirculation, sludge recycle, SRT(solids residence ...In order to improve nitrogen removal in anoxic/oxic(A/O) process effectively for treating domestic wastewaters, the influence factors, DO(dissolved oxygen), nitrate recirculation, sludge recycle, SRT(solids residence time), influent COD/TN and HRT(hydraulic retention time) were studied. Results indicated that it was possible to increase nitrogen removal by using corresponding control strategies, such as, adjusting the DO set point according to effluent ammonia concentration; manipulating nitrate recirculation flow according to nitrate concentration at the end of anoxic zone. Based on the experiments results, a knowledge-based approach for supervision of the nitrogen removal problems was considered, and decision trees for diagnosing nitrification and denitrification problems were built and successfully applied to A/O process.展开更多
In order to remove the low turbidity present in surface water, a novel metal-polysilicate coagulant was used to treat the raw water taken from Tanjiang River in Guangdong Province. This study on the effects of Al/Fe ...In order to remove the low turbidity present in surface water, a novel metal-polysilicate coagulant was used to treat the raw water taken from Tanjiang River in Guangdong Province. This study on the effects of Al/Fe molar ratio on the performance of a complex compound formed by polysilicic acid, aluminium and ferric salt (PAFS) showed that PAFS with Al/Fe ratio of 10:3 seemed to have the best coagulation performance in removing turbidity and color. Experimental results showed that under the conditions of polymerization time of 15 d, sedimentation time of 12 min, and pH of 6?8, PAFS with Al/Fe molar ratio of 10:3 had the best coagulation efficiency and lowest residual Al concentration. The turbid- ity decreased from 23.8 NTU to 3.23 NTU and the residual Al concentration was only 0.165 mg/L in the product water. It could be speculated that colloidal impurities and particulate Al were removed by adsorption bridging and electrical neu- tralization of long chain inorganic polymer coagulants.展开更多
Effect of added carbon source and nitrate concentration on the denitrifying phosphorus removal by DPB sludge was systematically studied using batch experiments, at the same time the variation of ORP was investigated. ...Effect of added carbon source and nitrate concentration on the denitrifying phosphorus removal by DPB sludge was systematically studied using batch experiments, at the same time the variation of ORP was investigated. Results showed that the denitrifying and phosphorus uptake rate in anoxic phase increased with the high initial anaerobic carbon source addition. However once the initial COD concentration reached a certain level, which was in excess to the PHB saturation of poly-P bacteria, residual COD carried over to anoxic phase inhibited the subsequent denitrifying phosphorus uptake. Simultaneously, phosphate uptake continued until all nitrate was removed, following a slow endogenous release of phosphate. High nitrate concentration in anoxic phase increased the initial denitrifying phosphorus rate. Once the nitrate was exhausted, phosphate uptake changed to release. Moreover, the time of this turning point occurred later with the higher nitrate addition. On the other hand, through on-line monitoring the variation of the ORP with different initial COD concentration, it was found ORP could be used as a control parameter for phosphorus release, but it is impossible to utilize ORP for controlling the denitrificaion and anoxic phosphorus uptake operations.展开更多
Mold-filling process of thin-walled castings under the condition of traveling magnetic field has been studied by physical simulation method using gallium melt and fast speed photography. Flow morphology and its format...Mold-filling process of thin-walled castings under the condition of traveling magnetic field has been studied by physical simulation method using gallium melt and fast speed photography. Flow morphology and its formation mechanism were obtained and discussed for thin-walled casting. The influences of magnetic field density on the filling ability, filling velocity and mold filling time have been studied. The differences in filling capability between gravity casting and casting under the traveling magnetic field have been compared. The results indicate that the mold filling ability of the gallium melt increases greatly under the condition of traveling magnetic field; the filling time is shortened from 18 s under gravity field to 3 s under the traveling magnetic field and average flow rate of the melt increases from 1.6 to 8.68 cm3/s; the change law of the cross-section morphology of the gallium melt during the mold filling is that at first, the cross-section area does not change, then it decreases gradually. When the front of the melt reaches the end of the mold cavity, the front melt will backfill the mold; the wider the width of mold cavity, the better the mold filling ability. The mold filling ability of gallium melt in mold with upper magnetic conductor is better than that without upper magnetic conductor.展开更多
A kind of Levextrel resin separation process was developed for separation ofindium (III), gallium (III), and zinc (II) from aqueous sulfate solution with Levextrel resincontaining di(2-ethylhexyl) phosphoric acid (CL-...A kind of Levextrel resin separation process was developed for separation ofindium (III), gallium (III), and zinc (II) from aqueous sulfate solution with Levextrel resincontaining di(2-ethylhexyl) phosphoric acid (CL-P 204). The aim of the research is to collectpreliminary results for a pilot-scale production. Properties of adsorbing indium (III), gallium(III), and zinc (II) from sulfate solution with the Levextrel resin were first studied by batchoperation and column operation. The optimum pH, adsorption capacities and concentrations ofstripping agents for indium (III), gallium (III) were tested. The separation order of indium (III),gallium (III), and zinc (II) from sulfate solution with CL-P 204 Levextrel resin was found thatindium (III) could be first separated by adsorbing at the acidity of 1.0 mol/L whereas gallium (III)and zinc (II) could not, and they were adsorbed together by adsorbing at pH =2.8, then separatedfrom each other by stripping with 0.1 and 0.5 mol/L hydrochloric acid, respectively. The recoveriesof three metal ions were all higher than 99 percent. The cyclic properties of this resin are well.展开更多
The method for harmonic cancellation based on artificial neural network (ANN)is proposed. The task is accomplished by generating reference signal with frequency that should beeliminated from the output. The reference ...The method for harmonic cancellation based on artificial neural network (ANN)is proposed. The task is accomplished by generating reference signal with frequency that should beeliminated from the output. The reference input is weighted by the ANN in such a way that it closelymatches the harmonic. The weighted reference signal is added to the fundamental signal such thatthe output harmonic is cancelled leaving the desired signal alone. The weights of ANN are adjustedby output harmonic, which is isolated by a bandpass filter. The above concept is used as a basis forthe development of adaptive harmonic cancellation (AHC) algorithm. Simulation results performedwith a hydraulic system demonstrate the efficiency and validity of the proposed AHC control scheme.展开更多
On the basis of continuous tests and batch tests, conversion regular patterns of acetate, propionate and butyrate in activated sludge at different heights of the UASB reactor were conducted. Results indicated that the...On the basis of continuous tests and batch tests, conversion regular patterns of acetate, propionate and butyrate in activated sludge at different heights of the UASB reactor were conducted. Results indicated that the conversion capacity of the microbe is decided by the substrate characteristic when sole VFA is used as the only substrate. But when mixed substrates are used,the conversion regulations would have changed accordingly. Relationships of different substrates vary according to their locations. In the whole reactor, propionate's conversion is restrained by acetate and butyrate of high concentration. On the top and at the bottom of the reactor, conversion of acetate, but butyrate, is restrained by propionate. And in the midst, acetate's conversion is accelerated by propionate while that of butyrate is restrained. It is proved, based on the analysis of specific conversion rate, that the space distribution of the microbe is the main factor that affects substrates' conversion. The ethanol type fermentation of the acidogenic phase is the optimal acid type fermentation for the two phase anaerobic process.展开更多
Water quality within water distribution system may vary with both location and time. Water quality models are used to predict the spatial and temporal variation of water quality throughout water system. A model of res...Water quality within water distribution system may vary with both location and time. Water quality models are used to predict the spatial and temporal variation of water quality throughout water system. A model of residual chlorine decay in water pipe has been developed, given the consumption of chlorine in reactions with chemicals in bulk water, bio films on pipe wall, in corrosion process, and the mass transport of chlorine from bulk water to pipe wall. Analytical methods of the flow path from water sources to the observed point and the water age of every observed node were proposed. Model is used to predict the decay of residual chlorine in an actual distribution system. Good agreement between calculated and measured values was obtained.展开更多
UKF (unscented Kalman filtering) is a new filtering method suitable to nonlinear systems. The method need not linearize nonlinear systems at the prediction stage of filtering, which is indispensable in EKF ( extended ...UKF (unscented Kalman filtering) is a new filtering method suitable to nonlinear systems. The method need not linearize nonlinear systems at the prediction stage of filtering, which is indispensable in EKF ( extended Kalman filtering) . As a result, the linearization error is avoided, and the filtering accuracy is greatly improved. UKF is applied to the attitude determination for gyroless satellite. Simulations are made to compare the new filter with the traditional EKF. The results indicate that under same conditions, compared with EKF, UKF has faster convergence speed, higher filtering accuracy and more stable estimation performance.展开更多
For the outputs of two nth-order linear control systems to work insynchronization and meanwhile to track their commands, a H_(infinity) synchronization control schemeis presented. In terms of two uncoupled single vari...For the outputs of two nth-order linear control systems to work insynchronization and meanwhile to track their commands, a H_(infinity) synchronization control schemeis presented. In terms of two uncoupled single variable linear systems, a multivariable coupledsystem is established by choosing one output and the difference of the two outputs as a new outputvector, so that both command tracking and synchronization properties can be demonstrated by aH_(infinity) performance index. To improve the synchronization and trailing performance and toguarantee the system robust stability, the mixed sensitivity H_(infinity), design methodology isadopted. The presented synchronization scheme is then extended to the case where one of the twosystems include two input variables, and then applied to the position synchronization control of awafer-retical stage. The wafer-reticle stage consists of a wafer stage, a reticle coarse stage, anda reticle fine stage. The reticle coarse stage picks up the reticle fine stage. The three stagesought to tack their commands, but synchronization between the wafer stage and the reticle fine stagemust be stressed in the tracking process. In the application, by appropriately determining theweighting matrices for the sensitivity function and the complementary sensitivity function, asatisfactory KL synchronization controller is obtained to realize highly accurate positionsynchronization, and to guarantee tracking performance. The above results are verified by simulationexperiments.展开更多
A framework for building EDM collaborative manufacturing system usingmulti-agent technology to support organizations characterized by physically distributed,enterprise-wide, heterogeneous intelligent manufacturing sys...A framework for building EDM collaborative manufacturing system usingmulti-agent technology to support organizations characterized by physically distributed,enterprise-wide, heterogeneous intelligent manufacturing system over Internet is proposed. Expertsystem theory is introduced. Design, manufacturing and technological knowledge are shared usingartificial intelligence and web techniques by EDM-CADagent, EDM-CAMagent and EDM-CAPPagent. Systemstructure, design process, network conditions, realization methods and other key techniques arediscussed. Instances are also introduced to testify feasibility.展开更多
Al2O3l2O3 joints were brazed with a new kind of filler materials, which were formed by adding AI203 particulates into Ag-Cu-Ti active filler metal. The results showed that the material parameters (the Ti content, Al2O...Al2O3l2O3 joints were brazed with a new kind of filler materials, which were formed by adding AI203 particulates into Ag-Cu-Ti active filler metal. The results showed that the material parameters (the Ti content, Al2O3 particulate volume fraction) of the composite filler materials affected the shear strength of brazed joints. When the Ti content was 2 wt pct in the filler metal, the shear strength of brazing joints decreased with the increasing the volume ratio of Al2O3 particulate. When the Ti content was 3 wt pct in the filler metal, the shear strength of joints increased from 93.75 MPa(AI203p 0 vol. pct) to 135.32 MPa(AI203p 15 vol. pct).展开更多
Chlorine content and position of chlorinated phenols have many significant effects on the reactivity of oxido-reduction. The effects of chlorine content and position of chlorinated phenols on their oxidation kinetics ...Chlorine content and position of chlorinated phenols have many significant effects on the reactivity of oxido-reduction. The effects of chlorine content and position of chlorinated phenols on their oxidation kinetics by potassium permanganate were evaluated through different kinetics studies. Since chlorine was an electron withdrawing atom, the substitution of chlorine on the aromatic ring decreased the oxidation rate constant by σ-electron withdrawing conductive effect. The substitution of chlorine at ortho or para position on the aromatic ring increased the oxidation rate constant by π-electron donating conjugative effect, and the conjugative effect could counteract the negative impact of the conductive effect to some extent. On the other hand, the substitution of chlorine at ortho position on the aromatic ring decreased the oxidation rate constant by steric hindrance effect. The oxidation rate constants of phenol and chlorinated phenols studied decreased as follow order: 4-chlorophenol>2,4-dichlorophenol>phenol>2,6-dichlorophenol.展开更多
文摘Cyclops of zooplankton propagated excessively in eutrophic water body and could not be effectively inactivated by the conventional disinfections process like chlorination due to its stronger resistance to oxidation. In this paper, a full-scale study of chlorine dioxide preoxidation cooperating with routine clarification process for Cyclops removal was conducted in a waterworks. The experimental results were compared with that of the existing prechlorination process in several aspects: including the Cyclops removal efficiencies of water samples taken from the outlets of sedimentation tank and sand filter and the security of drinking water and so on. The results showed that chlorine dioxide might be more effective to inactivate Cyclops than chlorine and Cyclops could be thoroughly removed from water by pre-dosing chlorine dioxide process. The GC-MS examination and Ames test further showed that the sort and amount of organic substance in the treated water by chlorine dioxide preoxidation were evidently less than that of prechlorination and the mutagenicity of drinking water treated by pre-dosing chlorine dioxide was substantially reduced compared with prechlorination.
文摘The operational performance of a full scale subsurface flow constructed wetland, which treated the mixed industrial and domestic wastewater with BOD 5/COD mean ratio of 0 33 at Shatian, Shenzhen City was studied. The constructed wetland system consists of screens, sump, pumping station, and primary settling basin, facultative pond, first stage wetland and secondary stage wetland. The designed treatment capacity is 5000 m 3/d, and the actual influent flow is in the range of <2000 to >10000 m 3/d. Under normal operational conditions, the final effluent quality well met the National Integrated Wastewater Discharge Standard(GB 8978\_1996), with the following parameters(mean values): COD 33 90 mg/L, BOD 5 7.65 mg/L, TSS 7.92 mg/L, TN 9.11 mg/L and TP 0 56 mg/L. Seven species of plants were selected to grow in the wetland: Reed, Sweetcane flower Silvergrass, Great Bulrush, Powdery Thalia and Canna of three colours. The growing season is a whole year round. The seasonal discrepancy could be observed and the plants growing in the wetland are vulnerable to lower temperature in winter. The recycling of the effluent in the first stage of the wetland system is an effective measure to improve the performance of the wetland system. The insufficient DO value in the wetland system not only had significant effect on pollutants removal in the wetland, but also was unfavourable to plant growth. The recycling of effluent to the inlet of wetland system and artificial pond to increase DO value of influent to the wetland is key to operate the subsurface constructed wetland steadily and effectively.
文摘A novel treating technology for nitrogen removal from soybean wastewater was studied. The process for nitrogen removal was achieved by alternating aeration and mixing, combined with real\|time control strategies. Results showed that the COD and total nitrogen removal rates are more than 90% and 92% at COD and total nitrogen loads of 1\^0-1\^2 kg COD/(kgMLSS·d) and 0\^20-0\^27 kg TN/(kgMLSS·d), respectively. In addition, it could improve sludge settling property. SVI value is less than 70 g/ml during the whole cycles. The method not only may be adapted to treat soybean wastewater with high nitrogen, but also may be applied to treat other high nitrogen wastewater.
文摘Simultaneous biological phosphorus and nitrogen removal with enhanced anoxic phosphate uptake via nitrite was investigated in an anaerobic-aerobic-anoxic-aerobic sequencing batch reactor((AO)2 SBR). The system showed stable phosphorus and nitrogen removal performance, and average removals for COD, TN and TP were 90%, 91% and 96%, respectively. The conditions of pH 7.5—8.0 and temperature 32℃ were found detrimental to nitrite oxidation bacteria but favorable to ammonia oxidizers, and the corresponding specific oxygen uptake rates(SOUR) for phase 1 and 2 of nitrification process were 0.7 and 15 mgO 2/(gVSS·h) in respect, which led to the nitrite accumulation in aerobic phase of(AO)2 SBR. Respiratory tests showed that 40 mgNO 2-N/L did not deteriorate the sludge activity drastically, and it implied that exposure of sludge to nitrite periodically enabled the biomass to have more tolerance capacity to resist the restraining effects from nitrite. In addition, batch tests were carried out and verified that denitrifying phosphorus accumulation organisms(DPAOs) could be enriched in a single sludge system coexisting with nitrifiers by introducing an anoxic phase in an anaerobic-aerobic SBR, and the ratio of the anoxic phosphate uptake capacity to aerobic phosphate uptake capacity was 45%. It was also found that nitrite(up to 20 mgNO 2-N/L) was not inhibitory to anoxic phosphate uptake and could serve as an electron acceptor like nitrate, but presented poorer efficiency compared with nitrate.
文摘The inactivation of microorganisms by pulsed magnetic field was studied. It was improved that the application of electromagnetic pulses evidently causes a lethal effect on E. coli cells suspended in phosphate buffer solution Na 2HPO 4/NaH 2PO 4(0 334/0 867 mmol/L). Experimental results indicated that the survivability(N/N 0; where N 0 and N are the number of cells survived per mill il iter before and after electromagnetic pulses application, respectively) of E. coli decreased with magnetic field intensity B and treatment time t. It was also found that the medium temperatures, the frequencies of pulse f, and the initial bacterial cell concentrations have determinate influences in destruction of E. coli cells by the application of magnetic pulses. The application of an magnetic intensity B=160 mT at pulses frequency f=62 kHz and treatment time t=16 h result in a considerable destruction levels of E. coli cells (N/N 0=10 -4 ). Possible mechanisms involved in sterilization of the magnetic field treatment were discussed. In order to shorten the treatment time, many groups of parallel inductive coil were used. The practicability test showed that the treatment time was shortened to 4 h with the application of three groups of parallel coil when the survivability of E.coli cells was less than 0 01%; and the power consumption was about 0 2 kWh /m 3.
基金The project is supported by National Natural Science Foundation of China(No.59975025).
文摘A genetic algorithm(GA)-based new method is designed to evaluate thecircularity error of mechanical parts. The method uses the capability of nonlinear optimization ofGA to search for the optimal solution of circularity error. The finely-designed GA (FDGA)characterized dynamical bisexual recombination and Gaussian mutation. The mathematical model of thenonlinear problem is given. The implementation details in FDGA are described such as the crossoveror recombination mechanism which utilized a bisexual reproduction scheme and the elitist reservationmethod; and the adaptive mutation which used the Gaussian probability distribution to determine thevalues of the offspring produced by mutation mechanism. The examples are provided to verify thedesigned FDGA. The computation results indicate that the FDGA works very well in the field of formerror evaluation such as circularity evaluation.
文摘The lifting technique is now the most popular tool for dealing with sampled-data controlsystems. However, for the robust stability problem the system norm is not preserved by the liftingas expected. And the result is generally conservative under the small gain condition. The reason forthe norm di?erence by the lifting is that the state transition operator in the lifted system is zero inthis case. A new approach to the robust stability analysis is proposed. It is to use an equivalentdiscrete-time uncertainty to replace the continuous-time uncertainty. Then the general discretizedmethod can be used for the robust stability problem, and it is not conservative. Examples are givenin the paper.
文摘In order to improve nitrogen removal in anoxic/oxic(A/O) process effectively for treating domestic wastewaters, the influence factors, DO(dissolved oxygen), nitrate recirculation, sludge recycle, SRT(solids residence time), influent COD/TN and HRT(hydraulic retention time) were studied. Results indicated that it was possible to increase nitrogen removal by using corresponding control strategies, such as, adjusting the DO set point according to effluent ammonia concentration; manipulating nitrate recirculation flow according to nitrate concentration at the end of anoxic zone. Based on the experiments results, a knowledge-based approach for supervision of the nitrogen removal problems was considered, and decision trees for diagnosing nitrification and denitrification problems were built and successfully applied to A/O process.
基金Project (No. E9825) supported by the Natural Science Foundation of Heilongjiang Province,China
文摘In order to remove the low turbidity present in surface water, a novel metal-polysilicate coagulant was used to treat the raw water taken from Tanjiang River in Guangdong Province. This study on the effects of Al/Fe molar ratio on the performance of a complex compound formed by polysilicic acid, aluminium and ferric salt (PAFS) showed that PAFS with Al/Fe ratio of 10:3 seemed to have the best coagulation performance in removing turbidity and color. Experimental results showed that under the conditions of polymerization time of 15 d, sedimentation time of 12 min, and pH of 6?8, PAFS with Al/Fe molar ratio of 10:3 had the best coagulation efficiency and lowest residual Al concentration. The turbid- ity decreased from 23.8 NTU to 3.23 NTU and the residual Al concentration was only 0.165 mg/L in the product water. It could be speculated that colloidal impurities and particulate Al were removed by adsorption bridging and electrical neu- tralization of long chain inorganic polymer coagulants.
文摘Effect of added carbon source and nitrate concentration on the denitrifying phosphorus removal by DPB sludge was systematically studied using batch experiments, at the same time the variation of ORP was investigated. Results showed that the denitrifying and phosphorus uptake rate in anoxic phase increased with the high initial anaerobic carbon source addition. However once the initial COD concentration reached a certain level, which was in excess to the PHB saturation of poly-P bacteria, residual COD carried over to anoxic phase inhibited the subsequent denitrifying phosphorus uptake. Simultaneously, phosphate uptake continued until all nitrate was removed, following a slow endogenous release of phosphate. High nitrate concentration in anoxic phase increased the initial denitrifying phosphorus rate. Once the nitrate was exhausted, phosphate uptake changed to release. Moreover, the time of this turning point occurred later with the higher nitrate addition. On the other hand, through on-line monitoring the variation of the ORP with different initial COD concentration, it was found ORP could be used as a control parameter for phosphorus release, but it is impossible to utilize ORP for controlling the denitrificaion and anoxic phosphorus uptake operations.
文摘Mold-filling process of thin-walled castings under the condition of traveling magnetic field has been studied by physical simulation method using gallium melt and fast speed photography. Flow morphology and its formation mechanism were obtained and discussed for thin-walled casting. The influences of magnetic field density on the filling ability, filling velocity and mold filling time have been studied. The differences in filling capability between gravity casting and casting under the traveling magnetic field have been compared. The results indicate that the mold filling ability of the gallium melt increases greatly under the condition of traveling magnetic field; the filling time is shortened from 18 s under gravity field to 3 s under the traveling magnetic field and average flow rate of the melt increases from 1.6 to 8.68 cm3/s; the change law of the cross-section morphology of the gallium melt during the mold filling is that at first, the cross-section area does not change, then it decreases gradually. When the front of the melt reaches the end of the mold cavity, the front melt will backfill the mold; the wider the width of mold cavity, the better the mold filling ability. The mold filling ability of gallium melt in mold with upper magnetic conductor is better than that without upper magnetic conductor.
文摘A kind of Levextrel resin separation process was developed for separation ofindium (III), gallium (III), and zinc (II) from aqueous sulfate solution with Levextrel resincontaining di(2-ethylhexyl) phosphoric acid (CL-P 204). The aim of the research is to collectpreliminary results for a pilot-scale production. Properties of adsorbing indium (III), gallium(III), and zinc (II) from sulfate solution with the Levextrel resin were first studied by batchoperation and column operation. The optimum pH, adsorption capacities and concentrations ofstripping agents for indium (III), gallium (III) were tested. The separation order of indium (III),gallium (III), and zinc (II) from sulfate solution with CL-P 204 Levextrel resin was found thatindium (III) could be first separated by adsorbing at the acidity of 1.0 mol/L whereas gallium (III)and zinc (II) could not, and they were adsorbed together by adsorbing at pH =2.8, then separatedfrom each other by stripping with 0.1 and 0.5 mol/L hydrochloric acid, respectively. The recoveriesof three metal ions were all higher than 99 percent. The cyclic properties of this resin are well.
文摘The method for harmonic cancellation based on artificial neural network (ANN)is proposed. The task is accomplished by generating reference signal with frequency that should beeliminated from the output. The reference input is weighted by the ANN in such a way that it closelymatches the harmonic. The weighted reference signal is added to the fundamental signal such thatthe output harmonic is cancelled leaving the desired signal alone. The weights of ANN are adjustedby output harmonic, which is isolated by a bandpass filter. The above concept is used as a basis forthe development of adaptive harmonic cancellation (AHC) algorithm. Simulation results performedwith a hydraulic system demonstrate the efficiency and validity of the proposed AHC control scheme.
文摘On the basis of continuous tests and batch tests, conversion regular patterns of acetate, propionate and butyrate in activated sludge at different heights of the UASB reactor were conducted. Results indicated that the conversion capacity of the microbe is decided by the substrate characteristic when sole VFA is used as the only substrate. But when mixed substrates are used,the conversion regulations would have changed accordingly. Relationships of different substrates vary according to their locations. In the whole reactor, propionate's conversion is restrained by acetate and butyrate of high concentration. On the top and at the bottom of the reactor, conversion of acetate, but butyrate, is restrained by propionate. And in the midst, acetate's conversion is accelerated by propionate while that of butyrate is restrained. It is proved, based on the analysis of specific conversion rate, that the space distribution of the microbe is the main factor that affects substrates' conversion. The ethanol type fermentation of the acidogenic phase is the optimal acid type fermentation for the two phase anaerobic process.
基金TheNationalNaturalScienceFoundationofChina (No .5 96 780 18)
文摘Water quality within water distribution system may vary with both location and time. Water quality models are used to predict the spatial and temporal variation of water quality throughout water system. A model of residual chlorine decay in water pipe has been developed, given the consumption of chlorine in reactions with chemicals in bulk water, bio films on pipe wall, in corrosion process, and the mass transport of chlorine from bulk water to pipe wall. Analytical methods of the flow path from water sources to the observed point and the water age of every observed node were proposed. Model is used to predict the decay of residual chlorine in an actual distribution system. Good agreement between calculated and measured values was obtained.
基金This project was supported by the Innoviation Foundation of the Space Science and Technology Group.
文摘UKF (unscented Kalman filtering) is a new filtering method suitable to nonlinear systems. The method need not linearize nonlinear systems at the prediction stage of filtering, which is indispensable in EKF ( extended Kalman filtering) . As a result, the linearization error is avoided, and the filtering accuracy is greatly improved. UKF is applied to the attitude determination for gyroless satellite. Simulations are made to compare the new filter with the traditional EKF. The results indicate that under same conditions, compared with EKF, UKF has faster convergence speed, higher filtering accuracy and more stable estimation performance.
基金This project is supported by Japan Society for the Promotion of Sci-ence(No.P01208)National Natural Science Foundation of China (No.60104003).
文摘For the outputs of two nth-order linear control systems to work insynchronization and meanwhile to track their commands, a H_(infinity) synchronization control schemeis presented. In terms of two uncoupled single variable linear systems, a multivariable coupledsystem is established by choosing one output and the difference of the two outputs as a new outputvector, so that both command tracking and synchronization properties can be demonstrated by aH_(infinity) performance index. To improve the synchronization and trailing performance and toguarantee the system robust stability, the mixed sensitivity H_(infinity), design methodology isadopted. The presented synchronization scheme is then extended to the case where one of the twosystems include two input variables, and then applied to the position synchronization control of awafer-retical stage. The wafer-reticle stage consists of a wafer stage, a reticle coarse stage, anda reticle fine stage. The reticle coarse stage picks up the reticle fine stage. The three stagesought to tack their commands, but synchronization between the wafer stage and the reticle fine stagemust be stressed in the tracking process. In the application, by appropriately determining theweighting matrices for the sensitivity function and the complementary sensitivity function, asatisfactory KL synchronization controller is obtained to realize highly accurate positionsynchronization, and to guarantee tracking performance. The above results are verified by simulationexperiments.
基金Natonal Natural Science Foundation of China (No.59935110)
文摘A framework for building EDM collaborative manufacturing system usingmulti-agent technology to support organizations characterized by physically distributed,enterprise-wide, heterogeneous intelligent manufacturing system over Internet is proposed. Expertsystem theory is introduced. Design, manufacturing and technological knowledge are shared usingartificial intelligence and web techniques by EDM-CADagent, EDM-CAMagent and EDM-CAPPagent. Systemstructure, design process, network conditions, realization methods and other key techniques arediscussed. Instances are also introduced to testify feasibility.
基金The authors are grateful for Project A50075019 supported by the National Natural Science Foundation of China and also for fi-nancial support from the visiting scholar foundation of key lab. in university of China.
文摘Al2O3l2O3 joints were brazed with a new kind of filler materials, which were formed by adding AI203 particulates into Ag-Cu-Ti active filler metal. The results showed that the material parameters (the Ti content, Al2O3 particulate volume fraction) of the composite filler materials affected the shear strength of brazed joints. When the Ti content was 2 wt pct in the filler metal, the shear strength of brazing joints decreased with the increasing the volume ratio of Al2O3 particulate. When the Ti content was 3 wt pct in the filler metal, the shear strength of joints increased from 93.75 MPa(AI203p 0 vol. pct) to 135.32 MPa(AI203p 15 vol. pct).
文摘Chlorine content and position of chlorinated phenols have many significant effects on the reactivity of oxido-reduction. The effects of chlorine content and position of chlorinated phenols on their oxidation kinetics by potassium permanganate were evaluated through different kinetics studies. Since chlorine was an electron withdrawing atom, the substitution of chlorine on the aromatic ring decreased the oxidation rate constant by σ-electron withdrawing conductive effect. The substitution of chlorine at ortho or para position on the aromatic ring increased the oxidation rate constant by π-electron donating conjugative effect, and the conjugative effect could counteract the negative impact of the conductive effect to some extent. On the other hand, the substitution of chlorine at ortho position on the aromatic ring decreased the oxidation rate constant by steric hindrance effect. The oxidation rate constants of phenol and chlorinated phenols studied decreased as follow order: 4-chlorophenol>2,4-dichlorophenol>phenol>2,6-dichlorophenol.
