AdshtT Marine stratocumulus clouds profoundly affect Earth's energy budget by reflecting solar radiation over extensive oceanic areas.Yet,after using a large-eddy simulation(LES)and a Lagrangian microphysics schem...AdshtT Marine stratocumulus clouds profoundly affect Earth's energy budget by reflecting solar radiation over extensive oceanic areas.Yet,after using a large-eddy simulation(LES)and a Lagrangian microphysics scheme(Super-Droplet Method,SDM)for entrainment-mixing studies,uncertainty remains in the grid resolution and super-droplet number concentration(SDNC)required for accurate homogeneity capture.This study analyzes the homogeneous mixing degree(HMD)and the Damkohler numbe(Da)in stratocumulus using an LES with SDM,from microphysical and dynamical perspectives,respectively.Results show that HMD and Da both display a top-to-base gradient,with more intense inhomogeneity near the cloud top and relatively homogeneous conditions toward the base,although the upper region i more complex.Even at a fine horizontal resolution of 12.5 m and vertical resolution of 2.5 m,HMD remains sensitive and does not converge,whereas Da converges at coarser grid spacings(up to horizontal and vertical spacings of 25 m anc 10 m,respectively)in the mid-cloud region.Similarly,HMD requires an SDNC well above 128 per cell for near-complete convergence,while Da converges once SDNC exceeds about I6 per cell.This difference arises because HMD depends on microphysical details,thereby demanding a high SDNC to capture local droplet inhomogeneities,whereas Da reflects turbulence-evaporation timescales that converge more readily once extreme droplet gradients are resolved.We further find that HMD and Da exhibit a significant negative correlation,with stronger anti-correlations emerging under finer spatial resolutions,reinforcing their complementary roles in diagnosing mixing regimes.Overall,these findings provide guidelines for selecting numerical configurations in entrainment-mixing simulations,ensuring that both turbulence-driven and microphysical processes are adequately resolved,.展开更多
We propose an arbitrary controlled-unitary （CU） gate and a bidirectional transfer scheme of quantum information （BTQI） for unknown photons. The proposed CU gate utilizes quantum non-demolition photon-number-resolv...We propose an arbitrary controlled-unitary （CU） gate and a bidirectional transfer scheme of quantum information （BTQI） for unknown photons. The proposed CU gate utilizes quantum non-demolition photon-number-resolving measure- ment based on the weak cross-Kerr nonlinearities （XKNLs） and two quantum bus beams; the proposed CU gate consists of consecutive operations of a controlled-path gate and a gathering-path gate. It is almost deterministic and is feasible with current technology when a strong amplitude of the coherent state and weak XKNLs are employed. Compared with the existing optical multi-qubit or controlled gates, which utilize XKNLs and homodyne detectors, the proposed CU gate can increase experimental realization feasibility and enhance robustness against decoherence. According to the CU gate, we present a BTQI scheme in which the two unknown states of photons between two parties （Alice and Bob） are mutually swapped by transferring only a single photon. Consequently, by using the proposed CU gate, it is possible to experimentally implement the BTQI scheme with a certain probability of success.展开更多
This study aims to clarify the characteristics of volunteer activities in times of disaster, while taking into account the influence of the orientation towards information intensity, which is an important feature of c...This study aims to clarify the characteristics of volunteer activities in times of disaster, while taking into account the influence of the orientation towards information intensity, which is an important feature of contemporary Japanese society, and focusing on the volunteer activities for recovery and reconstruction in the disaster-stricken areas of the Great East Japan Earthquake. In modern Japanese society, because volunteer activities are being conducted in a variety of forms, those who wish to volunteer can participate in volunteer activities that suit their own situation. Further, in a highly information-oriented society such as modern Japan, many kinds of information systems can be used to conduct a variety of volunteer activities. Also, know-how concerning the introduction and methods of volunteer activity and recruitment for participants in volunteer activities are introduced using various information media, and there are many volunteer activities to choose from. Therefore, it is possible that through the diversification of volunteer activities, many people become involved in volunteer activities on a long-term basis, using ways of doing so that are possible for themselves.展开更多
The present study aims to propose the method for the quantitative evaluation of safety concerning evacuation routes in case of earthquake disasters in urban areas using ACO （Ant Colony Optimization） algorithm and G...The present study aims to propose the method for the quantitative evaluation of safety concerning evacuation routes in case of earthquake disasters in urban areas using ACO （Ant Colony Optimization） algorithm and GIS （Geographic Information Systems）. Regarding the safety evaluation method, firstly, the similarity in safety was focused on while taking into consideration road blockage probability, and after classifying roads by means of the hierarchical cluster analysis, the congestion rates of evacuation routes using ACO simulations were estimated. Based on these results, the multiple evacuation routes extracted were visualized on digital maps by means of GIS, and its safety was evaluated. Furthermore, the selection of safe evacuation routes between evacuation sites, for cases when the possibility of large-scale evacuation after an earthquake disaster is high, is made possible. As the safety evaluation method is based on public information, by obtaining the same geographic information as the present study, it is effective in other areas regardless of whether the information is of the past and future. Therefore, in addition to spatial reproducibility, the safety evaluation method also has high temporal reproducibility. Because safety evaluations are conducted on evacuation routes based on quantified data, highly safe evacuation routes that are selected have been quantitatively evaluated, and thus serve as an effective indicator when selecting evacuation routes.展开更多
Data curation is vital for selecting effective demonstration examples in graph-to-text generation.However,evaluating the quality ofKnowledgeGraphs(KGs)remains challenging.Prior research exhibits a narrowfocus on struc...Data curation is vital for selecting effective demonstration examples in graph-to-text generation.However,evaluating the quality ofKnowledgeGraphs(KGs)remains challenging.Prior research exhibits a narrowfocus on structural statistics,such as the shortest path length,while the correctness of graphs in representing the associated text is rarely explored.To address this gap,we introduce a dual-perspective evaluation framework for KG-text data,based on the computation of structural adequacy and semantic alignment.Froma structural perspective,we propose the Weighted Incremental EdgeMethod(WIEM)to quantify graph completeness by leveraging agreement between relation models to predict possible edges between entities.WIEM targets to find increments from models on“unseen links”,whose presence is inversely proportional to the structural adequacy of the original KG in representing the text.From a semantic perspective,we evaluate how well a KG aligns with the text in capturing the intended meaning.To do so,we instruct a large language model to convert KGs into natural language andmeasure the similarity between generated and reference texts.Based on these computations,we apply a Top-K union method,integrating the structural and semantic modules,to rank and select high-quality KGs.We evaluate our framework against various approaches for selecting few-shot examples in graph-to-text generation.Experiments on theAssociation for Computational LinguisticsAbstract Graph Dataset(ACL-AGD)and Automatic Content Extraction 05(ACE05)dataset demonstrate the effectiveness of our approach in distinguishing KG-text data of different qualities,evidenced by the largest performance gap between top-and bottom-ranked examples.We also find that the top examples selected through our dual-perspective framework consistently yield better performance than those selected by traditional measures.These results highlight the importance of data curation in improving graph-to-text generation.展开更多
Planning in lexical-prior-free environments presents a fundamental challenge for evaluating whether large language models(LLMs)possess genuine structural reasoning capabilities beyond lexical memorization.When predica...Planning in lexical-prior-free environments presents a fundamental challenge for evaluating whether large language models(LLMs)possess genuine structural reasoning capabilities beyond lexical memorization.When predicates and action names are replaced with semantically irrelevant random symbols while preserving logical structures,existing direct generation approaches exhibit severe performance degradation.This paper proposes a symbol-agnostic closed-loop planning pipeline that enables models to construct executable plans through systematic validation and iterative refinement.The system implements a complete generate-verify-repair cycle through six core processing components:semantic comprehension extracts structural constraints,language planner generates text plans,symbol translator performs structure-preserving mapping,consistency checker conducts static screening,Stanford Research Institute Problem Solver(STRIPS)simulator executes step-by-step validation,and VAL(Validator)provides semantic verification.A repair controller orchestrates four targeted strategies addressing typical failure patterns including first-step precondition errors andmid-segment statemaintenance issues.Comprehensive evaluation on PlanBench Mystery Blocksworld demonstrates substantial improvements over baseline approaches across both language models and reasoning models.Ablation studies confirm that each architectural component contributes non-redundantly to overall effectiveness,with targeted repair providing the largest impact,followed by deep constraint extraction and stepwise validation,demonstrating that superior performance emerges from synergistic integration of these mechanisms rather than any single dominant factor.Analysis reveals distinct failure patterns betweenmodel types—languagemodels struggle with local precondition satisfaction while reasoning models face global goal achievement challenges—yet the validation-driven mechanism successfully addresses these diverse weaknesses.A particularly noteworthy finding is the convergence of final success rates across models with varying intrinsic capabilities,suggesting that systematic validation and repair mechanisms play a more decisive role than raw model capacity in lexical-prior-free scenarios.This work establishes a rigorous evaluation framework incorporating statistical significance testing and mechanistic failure analysis,providingmethodological contributions for fair assessment and practical insights into building reliable planning systems under extreme constraint conditions.展开更多
Diesel soot aggregates emitted from a model dynamometer and 11 on-road vehicles were segregated by a micro-orifice uniform deposit impactor （MOUDI）. The elemental contents and morphological parameters of the aggrega...Diesel soot aggregates emitted from a model dynamometer and 11 on-road vehicles were segregated by a micro-orifice uniform deposit impactor （MOUDI）. The elemental contents and morphological parameters of the aggregates were then examined by scanning electron microscopy coupled with an energy dispersive spectrometer （SEM-EDS）, and combined with a fractional Brownian motion （fBm） processor. Two mode-size distributions of aggregates collected from diesel vehicles were confirmed. Mean mass concentration of 339 mg/m3 （dC/dlogdp） existed in the dominant mode （180-320 nm）. A relatively high proportion of these aggregates appeared in PM 1, accentuating the relevance regarding adverse health effects. Furthermore, the fBm processor directly parameterized the SEM images of fractal like aggregates and successfully quantified surface texture to extract Hurst coefficients （H） of the aggregates. For aggregates from vehicles equipped with a universal cylinder number, the H value was independent of engine operational conditions. A small H value existed in emitted aggregates from vehicles with a large number of cylinders. This study found that aggregate fractal dimension related to H was in the range of 1.641-1.775, which is in agreement with values reported by previous TEM-based experiments. According to EDS analysis, carbon content ranged in a high level of 30%-50% by weight for diesel soot aggregates. The presence of Na and Mg elements in these sampled aggregates indicated the likelihood that some engine enhancers composed of biofuel or surfactants were commonly used in on-road vehicles in Taiwan. In particular, the morphological H combined with carbon content detection can be useful for characterizing chain-like or cluster diesel soot aggregates in the atmosphere.展开更多
Recent advances in 3D scanning technologies allow us to acquire accurate and dense 3D scan data of large-scale environments efficiently.Currently,there are various methods for acquiring largescale 3D scan data,such as...Recent advances in 3D scanning technologies allow us to acquire accurate and dense 3D scan data of large-scale environments efficiently.Currently,there are various methods for acquiring largescale 3D scan data,such as Mobile Laser Scanning(MLS),Airborne Laser Scanning,Terrestrial Laser Scanning,photogrammetry and Structure from Motion(SfM).Especially,MLS is useful to acquire dense point clouds of road and road-side objects,and SfM is a powerful technique to reconstruct meshes with textures from a set of digital images.In this research,a registration method of point clouds from vehicle-based MLS(MLS point cloud),and textured meshes from the SfM of aerial photographs(SfM mesh),is proposed for creating high-quality surface models of urban areas by combining them.In general,SfM mesh has non-scale information;therefore,scale,position,and orientation of the SfM mesh are adjusted in the registration process.In our method,first,2D feature points are extracted from both SfM mesh and MLS point cloud.This process consists of ground-and building-plane extraction by region growing,random sample consensus and least square method,vertical edge extraction by detecting intersections between the planes,and feature point extraction by intersection tests between the ground plane and the edges.Then,the corresponding feature points between the MLS point cloud and the SfM mesh are searched efficiently,using similarity invariant features and hashing.Next,the coordinate transformation is applied to the SfM mesh so that the ground planes and corresponding feature points are adjusted.Finally,scaling Iterative Closest Point algorithm is applied for accurate registration.Experimental results for three data-sets show that our method is effective for the registration of SfM mesh and MLS point cloud of urban areas including buildings.展开更多
This study experimentally investigates a jet flow issued into a two-layer density-stratified fluid in a tank and the resultant mixing phenomena. The upper and lower fluids are water and a NaCl- water solution, respect...This study experimentally investigates a jet flow issued into a two-layer density-stratified fluid in a tank and the resultant mixing phenomena. The upper and lower fluids are water and a NaCl- water solution, respectively, with the lower fluid issued vertically upward from a circular nozzle mounted on the tank bottom. Experimental highlights of the jet behavior and mixing phenomena are classified into three patterns according to the jet Reynolds number and mass concentration of the NaCl-water solution. The internal density current clearly occurs along the density interface, and the maximum jet height is predicted by the Froude number defined by the density difference between the upper and lower fluids. The effect of fluid thickness on the maximum jet height is also clarified.展开更多
Assays of stress enzymes related to active oxygen species were performed by using an in vitro preparation from the liver of a monkey (Japanese Macaque). Ge-132, an organic germanium compound, viz. poly-trans-[(2-carbo...Assays of stress enzymes related to active oxygen species were performed by using an in vitro preparation from the liver of a monkey (Japanese Macaque). Ge-132, an organic germanium compound, viz. poly-trans-[(2-carboxyethyl) germasesquioxane] [(GeCH2CH2COOH)2O3]n, suppressed the activities of NADH-dependent oxidase and NADPH-dependent oxidase [NAD(P)H-OD] and xanthine oxidase (XOD) as superoxide-forming enzymes, while promoting the activities of superoxide dismutase (SOD) as a superoxide-scavenging enzyme and catalase (CAT) as an enzyme responsible for degradation of hydrogen peroxide (H2O2). The evidence suggests that the levels of active oxygen species such as and H2O2 would be reduced by Ge-132. The possible connection between Ge-132 and activities of stress enzymes is discussed on the basis of these results.展开更多
Pedestrian protection has played an important role for driver assistance systems.Our aim is to develop a video based driver assistance system for the detection of the potentially dangerous situation between the vehicl...Pedestrian protection has played an important role for driver assistance systems.Our aim is to develop a video based driver assistance system for the detection of the potentially dangerous situation between the vehicle and pedestrian,in order to warn the driver.In this paper,we address the problem of detecting pedestrian in real-world scenes and estimation of the walking direction with a single camera from a moving vehicle.Considering all the available cues for predicting the possibility of collision is very important.The direction in which the pedestrian is facing is one of the most important cues predicting where the pedestrian may move in the future.So we first address the problem of sin-gle-frame pedestrian orientation estimation in real-world scenes.Then again,we estimate the pedes-trian walking direction using multi-frame based on the result of single-frame orientation estimation.We propose a three-step method:pedestrian detection for single-frame step,orientation estimation for single-frame step and walking direction estimation for multi-frame step.To evaluate the proposed method in its robustness and accuracy,the experiments have been performed between numbers of images which is highly challenging uncontrolled conditions in real world.It shows a significant per-formance improvement in octant orientation estimation of about 64% accuracy in the orientation es-timation step and achieved surprisingly good accuracy in estimating the walking direction against 212 targeted objects.展开更多
This study considers the regional characteristics of the Tohoku region and the extent of the damage caused by the Great East Japan Earthquake and makes proposals for recovery and reconstruction of the areas affected b...This study considers the regional characteristics of the Tohoku region and the extent of the damage caused by the Great East Japan Earthquake and makes proposals for recovery and reconstruction of the areas affected by this disaster as well as for a reduction of the impact of natural disasters that may occur in the future with GIS （geographic information systems） as a social infrastructure positioned at the heart of the information infrastructure. Due to the fact that social media that used ICT （information and communication technology） was useful in the days directly after the disaster, it can be said that it is necessary to investigate the provision of an information infrastructure that uses ICT to reduce the impact of disasters. Therefore, this study proposes the construction of a geographical information database using GIS and the provision and sharing of information using social media GIS after discussion of the relationship between the development of the computerization of Japan and GIS as a valid example of using information systems for recovery and reconstruction after the Great East Japan Earthquake.展开更多
The regulatory mechanisms in cellular signaling systems have been studied intensively from the viewpoint that the malfunction of the regulation is thought to be one of the substantial causes of cancer formation. On th...The regulatory mechanisms in cellular signaling systems have been studied intensively from the viewpoint that the malfunction of the regulation is thought to be one of the substantial causes of cancer formation. On the other hand, it is rather difficult to develop the theoretical framework for investigation of the regulatory mechanisms due to their complexity and nonlinearity. In this study, more general approach is proposed for elucidation of characteristics of the stability in cellular signaling systems by construction of mathematical models for a class of cellular signaling systems and stability analysis of the models over variation of the network architectures and the parameter values. The model system is formulated as regulatory network in which every node represents a phosphorylation-dephosphorylation cyclic reaction for respective constituent enzyme. The analysis is performed for all variations of the regulatory networks comprised of two nodes with multiple feedback regulation loops. It is revealed from the analysis that the regulatory networks become mono-stable, bi-stable, tri-stable, or oscillatory and that the negative mutual feedback or positive mutual feedback is favorable for multi-stability, which is augmented by a negatively regulated node with a positive auto-regulation. Furthermore, the multi-stability or the oscillation is more likely to emerge in the case of low value of the Michaelis constant than in the case of high value, implying that the condition of higher saturation levels induces stronger nonlinearity in the networks. The analysis for the parameter regions yielding the multi-stability and the oscillation clarified that the stronger regulation shifts the systems toward multi-stability.展开更多
Implicit surface generation based on the interpolation of surface points is one of the well-known modeling methods in the area of computer graphics.Several methods for the implicit surface reconstruction from surface ...Implicit surface generation based on the interpolation of surface points is one of the well-known modeling methods in the area of computer graphics.Several methods for the implicit surface reconstruction from surface points have been proposed on the basis of radial basis functions,a weighted sum of local functions,splines,wavelets,and combinations of them.However,if the surface points contain errors or are sparsely distributed,irregular components,such as curvature-shaped redundant bulges and unexpectedly generated high-frequency components,are commonly seen.This paper presents a framework for restoring irregular components generated on and around surfaces.Users are assumed to specify local masks that cover irregular components and parameters that determine the degree of restoration.The algorithm in this paper removes the defects based on the user-specific masks and parameters.Experiments have shown that the proposed methods can effectively remove redundant protrusions and jaggy noise.展开更多
This study aims to develop an economic evaluation method for installing photovoltaic power generation in ordinary homes using GIS (Geographic Information Systems). The conclusions can be summarized in the following th...This study aims to develop an economic evaluation method for installing photovoltaic power generation in ordinary homes using GIS (Geographic Information Systems). The conclusions can be summarized in the following three points: 1) This method determines the profit and loss and payback period in order to evaluate the installation of photovoltaic power generation, taking into account the price of equipment, solar battery module conversion efficiency, subsidy, electricity purchase price, service life and rate for selling electricity. 2) The proposed evaluation method was applied to Kanagawa Prefecture in Japan, providing plural scenarios. Using a solar battery module conversion efficiency of more than 15%, it is possible to make the payback period shorter than the 20-year service life and anticipate a profit in almost the whole area. 3) The areas suitable for photovoltaic power generation are Kawasaki City and Ninomiya-machi. It is necessary to adopt measures to increase the subsidy and install photovoltaic power generating systems in specific places in areas where subsidies are not provided in enough amounts.展开更多
Demands for low-energy microcontrollers have been increasing in recent years. Since most microcontrollers achieve user programmability by integrating nonvolatile (NV) memories such as flash memories for storing their ...Demands for low-energy microcontrollers have been increasing in recent years. Since most microcontrollers achieve user programmability by integrating nonvolatile (NV) memories such as flash memories for storing their programs, the large power consumption required in accessing an NV memory has become a major problem. This problem becomes critical when the power supply voltage of NV microcontrollers is decreased. We can solve this problem by introducing an instruction cache, thus reducing the access frequency of the NV memory. Unlike general-purpose microprocessors, microcontrollers used for real-time applications in embedded systems must accurately calculate program execution time prior to its execution. Therefore, we introduce a “transparent” instruction cache, which does not change the existing NV microcontroller’s cycle-level execution time, for reducing power and energy consumption, but not for improving the processing speed. We have conducted detailed microar chitecture design based on the architecture of a major industrial microcontroller, and we evaluated power and energy consumption for several benchmark programs. Our evaluation shows that the proposed instruction cache can successfully reduce energy consumption in a fairly wide range of practical NV microcontroller configurations.展开更多
Nickel-manganese binary layered oxides with high working potential and low cost are potential candidates for sodium-ion batteries,but their electrochemical properties are highly related to compositional diversity.Dive...Nickel-manganese binary layered oxides with high working potential and low cost are potential candidates for sodium-ion batteries,but their electrochemical properties are highly related to compositional diversity.Diverse composite materials with various phase structures of P3,P2/P3,P2,P2/O3,and P2/P3/O3 were synthesized by manipulating the sodium content and calcination conditions,leading to the construction of a synthetic phase diagram for Na_(x)Ni_(0.25)Mn_(0.75)O_(2)(0.45≤x≤1.1).Then,we compared the electrochemical characteristics and structural evolution during the desodiation/sodiation process of P2,P2/P3,P2/03,and P2/P3/O3-Na_(x)Ni_(0.25)Mn_(0.75)O_(2).Among them,P2/P3-Na0.75Ni0.25Mn0.75O2exhibits the best rate capability of 90.9 mA h g^(-1)at 5 C,with an initial discharge capacity of 142.62 mA h g^(-1)at 0.1 C and a capacity retention rate of 78.25%after 100 cycles at 1 C in the voltage range of 2-4.3 V.The observed superior sodium storage performance of P2/P3 hybrids compared to other composite phases can be attributed to the enhanced Na^(+)transfer dynamic,reduction of the Jahn-teller effect,and improved reaction reversibility induced by the synergistic effect of P2 and P3 phases.The systematic research and exploration of phases in Na_(x)Ni_(0.25)Mn_(0.75)O_(2)provide new sights into high-performance nickel-manganese binary layered oxide for sodium-ion batteries.展开更多
AIM To perform automatic gastric cancer risk classificationusing photofluorography for realizing effective mass screening as a preliminary study.METHODS We used data for 2100 subjects including X-ray images,pepsinogen...AIM To perform automatic gastric cancer risk classificationusing photofluorography for realizing effective mass screening as a preliminary study.METHODS We used data for 2100 subjects including X-ray images,pepsinogenⅠandⅡlevels,PGⅠ/PGⅡratio,Helicobacter pylori(H.pylori)antibody,H.pylori eradication history and interview sheets.We performed two-stage classification with our system.In the first stage,H.pylori infection status classification was performed,and H.pylori-infected subjects were automatically detected.In the second stage,we performed atrophic level classification to validate the effectiveness of our system.RESULTS Sensitivity,specificity and Youden index(YI)of H.pylori infection status classification were 0.884,0.895 and 0.779,respectively,in the first stage.In the second stage,sensitivity,specificity and YI of atrophic level classification for H.pylori-infected subjects were 0.777,0.824 and 0.601,respectively.CONCLUSION Although further improvements of the system are needed,experimental results indicated the effectiveness of machine learning techniques for estimation of gastric cancer risk.展开更多
This study experimentally explores the flow around a cylinder with circular cross-section placed inside a bubble plume. Small gas bubbles with diameter smaller than 0.06 mm are released from electrodes on the bottom o...This study experimentally explores the flow around a cylinder with circular cross-section placed inside a bubble plume. Small gas bubbles with diameter smaller than 0.06 mm are released from electrodes on the bottom of a water tank by electrolysis of water. The bubbles induce water flow around them as they rise because of buoyancy. Inside the generated bubble plume, a cylinder with diameter D of 30 mm is placed at 6.5D above the electrodes. The bubbles and water flow around the cylinder are visualized, and the bubble velocity distribution is measured. The experiments elucidate the bubble behavior around the cylinder, the separated shear layers originating at the cylinder surface, their roll-up, the bubble entrainment in the resultant large-scale eddies behind the cylinder, and the vortex shedding from the cylinder.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.42325503 and 42230604)The appointment of Chunsong Lu at Nanjing University of Information Science&Technology is partially supported by the Jiangsu Specially-Appointed Professor(Grant No.R2024T01).This research partly used the computational resources of Hokkaido University through the HPCI System Research Project(project IDs:hp200078,hp210059,hp220062,hp230166,and hp240151)and the computer facilities of the Center for Cooperative Work on Data Science and Computational Science,University of Hyogo.Shin-ichiro SHIMA was supported by JSPS KAKENHI,Grant 20H00225 and 23H00149and JST(Moonshot R and D)(Grant JPMJMS2286).We acknowledge the High-Performance Computing Center of the Nanjing University of Information Science and Technology for their support of this work.This study was also supported by the National Key Scientific and Technological Infrastructure project“Earth System Science Numerical Simulator Facility”(EarthLab,2024-EL-PT-000615).Chongzhi YIN would like to thank Lei Zhu for his generous support and informative discussions.
文摘AdshtT Marine stratocumulus clouds profoundly affect Earth's energy budget by reflecting solar radiation over extensive oceanic areas.Yet,after using a large-eddy simulation(LES)and a Lagrangian microphysics scheme(Super-Droplet Method,SDM)for entrainment-mixing studies,uncertainty remains in the grid resolution and super-droplet number concentration(SDNC)required for accurate homogeneity capture.This study analyzes the homogeneous mixing degree(HMD)and the Damkohler numbe(Da)in stratocumulus using an LES with SDM,from microphysical and dynamical perspectives,respectively.Results show that HMD and Da both display a top-to-base gradient,with more intense inhomogeneity near the cloud top and relatively homogeneous conditions toward the base,although the upper region i more complex.Even at a fine horizontal resolution of 12.5 m and vertical resolution of 2.5 m,HMD remains sensitive and does not converge,whereas Da converges at coarser grid spacings(up to horizontal and vertical spacings of 25 m anc 10 m,respectively)in the mid-cloud region.Similarly,HMD requires an SDNC well above 128 per cell for near-complete convergence,while Da converges once SDNC exceeds about I6 per cell.This difference arises because HMD depends on microphysical details,thereby demanding a high SDNC to capture local droplet inhomogeneities,whereas Da reflects turbulence-evaporation timescales that converge more readily once extreme droplet gradients are resolved.We further find that HMD and Da exhibit a significant negative correlation,with stronger anti-correlations emerging under finer spatial resolutions,reinforcing their complementary roles in diagnosing mixing regimes.Overall,these findings provide guidelines for selecting numerical configurations in entrainment-mixing simulations,ensuring that both turbulence-driven and microphysical processes are adequately resolved,.
文摘We propose an arbitrary controlled-unitary （CU） gate and a bidirectional transfer scheme of quantum information （BTQI） for unknown photons. The proposed CU gate utilizes quantum non-demolition photon-number-resolving measure- ment based on the weak cross-Kerr nonlinearities （XKNLs） and two quantum bus beams; the proposed CU gate consists of consecutive operations of a controlled-path gate and a gathering-path gate. It is almost deterministic and is feasible with current technology when a strong amplitude of the coherent state and weak XKNLs are employed. Compared with the existing optical multi-qubit or controlled gates, which utilize XKNLs and homodyne detectors, the proposed CU gate can increase experimental realization feasibility and enhance robustness against decoherence. According to the CU gate, we present a BTQI scheme in which the two unknown states of photons between two parties （Alice and Bob） are mutually swapped by transferring only a single photon. Consequently, by using the proposed CU gate, it is possible to experimentally implement the BTQI scheme with a certain probability of success.
文摘This study aims to clarify the characteristics of volunteer activities in times of disaster, while taking into account the influence of the orientation towards information intensity, which is an important feature of contemporary Japanese society, and focusing on the volunteer activities for recovery and reconstruction in the disaster-stricken areas of the Great East Japan Earthquake. In modern Japanese society, because volunteer activities are being conducted in a variety of forms, those who wish to volunteer can participate in volunteer activities that suit their own situation. Further, in a highly information-oriented society such as modern Japan, many kinds of information systems can be used to conduct a variety of volunteer activities. Also, know-how concerning the introduction and methods of volunteer activity and recruitment for participants in volunteer activities are introduced using various information media, and there are many volunteer activities to choose from. Therefore, it is possible that through the diversification of volunteer activities, many people become involved in volunteer activities on a long-term basis, using ways of doing so that are possible for themselves.
文摘The present study aims to propose the method for the quantitative evaluation of safety concerning evacuation routes in case of earthquake disasters in urban areas using ACO （Ant Colony Optimization） algorithm and GIS （Geographic Information Systems）. Regarding the safety evaluation method, firstly, the similarity in safety was focused on while taking into consideration road blockage probability, and after classifying roads by means of the hierarchical cluster analysis, the congestion rates of evacuation routes using ACO simulations were estimated. Based on these results, the multiple evacuation routes extracted were visualized on digital maps by means of GIS, and its safety was evaluated. Furthermore, the selection of safe evacuation routes between evacuation sites, for cases when the possibility of large-scale evacuation after an earthquake disaster is high, is made possible. As the safety evaluation method is based on public information, by obtaining the same geographic information as the present study, it is effective in other areas regardless of whether the information is of the past and future. Therefore, in addition to spatial reproducibility, the safety evaluation method also has high temporal reproducibility. Because safety evaluations are conducted on evacuation routes based on quantified data, highly safe evacuation routes that are selected have been quantitatively evaluated, and thus serve as an effective indicator when selecting evacuation routes.
文摘Data curation is vital for selecting effective demonstration examples in graph-to-text generation.However,evaluating the quality ofKnowledgeGraphs(KGs)remains challenging.Prior research exhibits a narrowfocus on structural statistics,such as the shortest path length,while the correctness of graphs in representing the associated text is rarely explored.To address this gap,we introduce a dual-perspective evaluation framework for KG-text data,based on the computation of structural adequacy and semantic alignment.Froma structural perspective,we propose the Weighted Incremental EdgeMethod(WIEM)to quantify graph completeness by leveraging agreement between relation models to predict possible edges between entities.WIEM targets to find increments from models on“unseen links”,whose presence is inversely proportional to the structural adequacy of the original KG in representing the text.From a semantic perspective,we evaluate how well a KG aligns with the text in capturing the intended meaning.To do so,we instruct a large language model to convert KGs into natural language andmeasure the similarity between generated and reference texts.Based on these computations,we apply a Top-K union method,integrating the structural and semantic modules,to rank and select high-quality KGs.We evaluate our framework against various approaches for selecting few-shot examples in graph-to-text generation.Experiments on theAssociation for Computational LinguisticsAbstract Graph Dataset(ACL-AGD)and Automatic Content Extraction 05(ACE05)dataset demonstrate the effectiveness of our approach in distinguishing KG-text data of different qualities,evidenced by the largest performance gap between top-and bottom-ranked examples.We also find that the top examples selected through our dual-perspective framework consistently yield better performance than those selected by traditional measures.These results highlight the importance of data curation in improving graph-to-text generation.
基金supported by the Information,Production and Systems Research Center,Waseda University,and partly supported by the Future Robotics Organization,Waseda Universitythe Humanoid Robotics Institute,Waseda University,under the Humanoid Project+1 种基金the Waseda University Grant for Special Research Projects(grant numbers 2024C-518 and 2025E-027)was partly executed under the cooperation of organization between Kioxia Corporation andWaseda University.
文摘Planning in lexical-prior-free environments presents a fundamental challenge for evaluating whether large language models(LLMs)possess genuine structural reasoning capabilities beyond lexical memorization.When predicates and action names are replaced with semantically irrelevant random symbols while preserving logical structures,existing direct generation approaches exhibit severe performance degradation.This paper proposes a symbol-agnostic closed-loop planning pipeline that enables models to construct executable plans through systematic validation and iterative refinement.The system implements a complete generate-verify-repair cycle through six core processing components:semantic comprehension extracts structural constraints,language planner generates text plans,symbol translator performs structure-preserving mapping,consistency checker conducts static screening,Stanford Research Institute Problem Solver(STRIPS)simulator executes step-by-step validation,and VAL(Validator)provides semantic verification.A repair controller orchestrates four targeted strategies addressing typical failure patterns including first-step precondition errors andmid-segment statemaintenance issues.Comprehensive evaluation on PlanBench Mystery Blocksworld demonstrates substantial improvements over baseline approaches across both language models and reasoning models.Ablation studies confirm that each architectural component contributes non-redundantly to overall effectiveness,with targeted repair providing the largest impact,followed by deep constraint extraction and stepwise validation,demonstrating that superior performance emerges from synergistic integration of these mechanisms rather than any single dominant factor.Analysis reveals distinct failure patterns betweenmodel types—languagemodels struggle with local precondition satisfaction while reasoning models face global goal achievement challenges—yet the validation-driven mechanism successfully addresses these diverse weaknesses.A particularly noteworthy finding is the convergence of final success rates across models with varying intrinsic capabilities,suggesting that systematic validation and repair mechanisms play a more decisive role than raw model capacity in lexical-prior-free scenarios.This work establishes a rigorous evaluation framework incorporating statistical significance testing and mechanistic failure analysis,providingmethodological contributions for fair assessment and practical insights into building reliable planning systems under extreme constraint conditions.
基金supported by the "National"Science Council of Taiwan, China (No. NSC 92-2211-E-241-008,96-2221-E-241-011-MY3)
文摘Diesel soot aggregates emitted from a model dynamometer and 11 on-road vehicles were segregated by a micro-orifice uniform deposit impactor （MOUDI）. The elemental contents and morphological parameters of the aggregates were then examined by scanning electron microscopy coupled with an energy dispersive spectrometer （SEM-EDS）, and combined with a fractional Brownian motion （fBm） processor. Two mode-size distributions of aggregates collected from diesel vehicles were confirmed. Mean mass concentration of 339 mg/m3 （dC/dlogdp） existed in the dominant mode （180-320 nm）. A relatively high proportion of these aggregates appeared in PM 1, accentuating the relevance regarding adverse health effects. Furthermore, the fBm processor directly parameterized the SEM images of fractal like aggregates and successfully quantified surface texture to extract Hurst coefficients （H） of the aggregates. For aggregates from vehicles equipped with a universal cylinder number, the H value was independent of engine operational conditions. A small H value existed in emitted aggregates from vehicles with a large number of cylinders. This study found that aggregate fractal dimension related to H was in the range of 1.641-1.775, which is in agreement with values reported by previous TEM-based experiments. According to EDS analysis, carbon content ranged in a high level of 30%-50% by weight for diesel soot aggregates. The presence of Na and Mg elements in these sampled aggregates indicated the likelihood that some engine enhancers composed of biofuel or surfactants were commonly used in on-road vehicles in Taiwan. In particular, the morphological H combined with carbon content detection can be useful for characterizing chain-like or cluster diesel soot aggregates in the atmosphere.
基金This work was partially supported by JSPS KAKENHI[grant number 26420073].
文摘Recent advances in 3D scanning technologies allow us to acquire accurate and dense 3D scan data of large-scale environments efficiently.Currently,there are various methods for acquiring largescale 3D scan data,such as Mobile Laser Scanning(MLS),Airborne Laser Scanning,Terrestrial Laser Scanning,photogrammetry and Structure from Motion(SfM).Especially,MLS is useful to acquire dense point clouds of road and road-side objects,and SfM is a powerful technique to reconstruct meshes with textures from a set of digital images.In this research,a registration method of point clouds from vehicle-based MLS(MLS point cloud),and textured meshes from the SfM of aerial photographs(SfM mesh),is proposed for creating high-quality surface models of urban areas by combining them.In general,SfM mesh has non-scale information;therefore,scale,position,and orientation of the SfM mesh are adjusted in the registration process.In our method,first,2D feature points are extracted from both SfM mesh and MLS point cloud.This process consists of ground-and building-plane extraction by region growing,random sample consensus and least square method,vertical edge extraction by detecting intersections between the planes,and feature point extraction by intersection tests between the ground plane and the edges.Then,the corresponding feature points between the MLS point cloud and the SfM mesh are searched efficiently,using similarity invariant features and hashing.Next,the coordinate transformation is applied to the SfM mesh so that the ground planes and corresponding feature points are adjusted.Finally,scaling Iterative Closest Point algorithm is applied for accurate registration.Experimental results for three data-sets show that our method is effective for the registration of SfM mesh and MLS point cloud of urban areas including buildings.
文摘This study experimentally investigates a jet flow issued into a two-layer density-stratified fluid in a tank and the resultant mixing phenomena. The upper and lower fluids are water and a NaCl- water solution, respectively, with the lower fluid issued vertically upward from a circular nozzle mounted on the tank bottom. Experimental highlights of the jet behavior and mixing phenomena are classified into three patterns according to the jet Reynolds number and mass concentration of the NaCl-water solution. The internal density current clearly occurs along the density interface, and the maximum jet height is predicted by the Froude number defined by the density difference between the upper and lower fluids. The effect of fluid thickness on the maximum jet height is also clarified.
文摘Assays of stress enzymes related to active oxygen species were performed by using an in vitro preparation from the liver of a monkey (Japanese Macaque). Ge-132, an organic germanium compound, viz. poly-trans-[(2-carboxyethyl) germasesquioxane] [(GeCH2CH2COOH)2O3]n, suppressed the activities of NADH-dependent oxidase and NADPH-dependent oxidase [NAD(P)H-OD] and xanthine oxidase (XOD) as superoxide-forming enzymes, while promoting the activities of superoxide dismutase (SOD) as a superoxide-scavenging enzyme and catalase (CAT) as an enzyme responsible for degradation of hydrogen peroxide (H2O2). The evidence suggests that the levels of active oxygen species such as and H2O2 would be reduced by Ge-132. The possible connection between Ge-132 and activities of stress enzymes is discussed on the basis of these results.
文摘Pedestrian protection has played an important role for driver assistance systems.Our aim is to develop a video based driver assistance system for the detection of the potentially dangerous situation between the vehicle and pedestrian,in order to warn the driver.In this paper,we address the problem of detecting pedestrian in real-world scenes and estimation of the walking direction with a single camera from a moving vehicle.Considering all the available cues for predicting the possibility of collision is very important.The direction in which the pedestrian is facing is one of the most important cues predicting where the pedestrian may move in the future.So we first address the problem of sin-gle-frame pedestrian orientation estimation in real-world scenes.Then again,we estimate the pedes-trian walking direction using multi-frame based on the result of single-frame orientation estimation.We propose a three-step method:pedestrian detection for single-frame step,orientation estimation for single-frame step and walking direction estimation for multi-frame step.To evaluate the proposed method in its robustness and accuracy,the experiments have been performed between numbers of images which is highly challenging uncontrolled conditions in real world.It shows a significant per-formance improvement in octant orientation estimation of about 64% accuracy in the orientation es-timation step and achieved surprisingly good accuracy in estimating the walking direction against 212 targeted objects.
文摘This study considers the regional characteristics of the Tohoku region and the extent of the damage caused by the Great East Japan Earthquake and makes proposals for recovery and reconstruction of the areas affected by this disaster as well as for a reduction of the impact of natural disasters that may occur in the future with GIS （geographic information systems） as a social infrastructure positioned at the heart of the information infrastructure. Due to the fact that social media that used ICT （information and communication technology） was useful in the days directly after the disaster, it can be said that it is necessary to investigate the provision of an information infrastructure that uses ICT to reduce the impact of disasters. Therefore, this study proposes the construction of a geographical information database using GIS and the provision and sharing of information using social media GIS after discussion of the relationship between the development of the computerization of Japan and GIS as a valid example of using information systems for recovery and reconstruction after the Great East Japan Earthquake.
文摘The regulatory mechanisms in cellular signaling systems have been studied intensively from the viewpoint that the malfunction of the regulation is thought to be one of the substantial causes of cancer formation. On the other hand, it is rather difficult to develop the theoretical framework for investigation of the regulatory mechanisms due to their complexity and nonlinearity. In this study, more general approach is proposed for elucidation of characteristics of the stability in cellular signaling systems by construction of mathematical models for a class of cellular signaling systems and stability analysis of the models over variation of the network architectures and the parameter values. The model system is formulated as regulatory network in which every node represents a phosphorylation-dephosphorylation cyclic reaction for respective constituent enzyme. The analysis is performed for all variations of the regulatory networks comprised of two nodes with multiple feedback regulation loops. It is revealed from the analysis that the regulatory networks become mono-stable, bi-stable, tri-stable, or oscillatory and that the negative mutual feedback or positive mutual feedback is favorable for multi-stability, which is augmented by a negatively regulated node with a positive auto-regulation. Furthermore, the multi-stability or the oscillation is more likely to emerge in the case of low value of the Michaelis constant than in the case of high value, implying that the condition of higher saturation levels induces stronger nonlinearity in the networks. The analysis for the parameter regions yielding the multi-stability and the oscillation clarified that the stronger regulation shifts the systems toward multi-stability.
文摘Implicit surface generation based on the interpolation of surface points is one of the well-known modeling methods in the area of computer graphics.Several methods for the implicit surface reconstruction from surface points have been proposed on the basis of radial basis functions,a weighted sum of local functions,splines,wavelets,and combinations of them.However,if the surface points contain errors or are sparsely distributed,irregular components,such as curvature-shaped redundant bulges and unexpectedly generated high-frequency components,are commonly seen.This paper presents a framework for restoring irregular components generated on and around surfaces.Users are assumed to specify local masks that cover irregular components and parameters that determine the degree of restoration.The algorithm in this paper removes the defects based on the user-specific masks and parameters.Experiments have shown that the proposed methods can effectively remove redundant protrusions and jaggy noise.
文摘This study aims to develop an economic evaluation method for installing photovoltaic power generation in ordinary homes using GIS (Geographic Information Systems). The conclusions can be summarized in the following three points: 1) This method determines the profit and loss and payback period in order to evaluate the installation of photovoltaic power generation, taking into account the price of equipment, solar battery module conversion efficiency, subsidy, electricity purchase price, service life and rate for selling electricity. 2) The proposed evaluation method was applied to Kanagawa Prefecture in Japan, providing plural scenarios. Using a solar battery module conversion efficiency of more than 15%, it is possible to make the payback period shorter than the 20-year service life and anticipate a profit in almost the whole area. 3) The areas suitable for photovoltaic power generation are Kawasaki City and Ninomiya-machi. It is necessary to adopt measures to increase the subsidy and install photovoltaic power generating systems in specific places in areas where subsidies are not provided in enough amounts.
文摘Demands for low-energy microcontrollers have been increasing in recent years. Since most microcontrollers achieve user programmability by integrating nonvolatile (NV) memories such as flash memories for storing their programs, the large power consumption required in accessing an NV memory has become a major problem. This problem becomes critical when the power supply voltage of NV microcontrollers is decreased. We can solve this problem by introducing an instruction cache, thus reducing the access frequency of the NV memory. Unlike general-purpose microprocessors, microcontrollers used for real-time applications in embedded systems must accurately calculate program execution time prior to its execution. Therefore, we introduce a “transparent” instruction cache, which does not change the existing NV microcontroller’s cycle-level execution time, for reducing power and energy consumption, but not for improving the processing speed. We have conducted detailed microar chitecture design based on the architecture of a major industrial microcontroller, and we evaluated power and energy consumption for several benchmark programs. Our evaluation shows that the proposed instruction cache can successfully reduce energy consumption in a fairly wide range of practical NV microcontroller configurations.
基金supported by project from the National Natural Science Foundation of China(21805018)by the Sichuan Science and Technology Program(2022ZHCG0018,2023NSFSC0117,2023ZHCG0060)+1 种基金the Yibin Science and Technology Program(2022JB005)project funded by the China Postdoctoral Science Foundation(2022M722704)。
文摘Nickel-manganese binary layered oxides with high working potential and low cost are potential candidates for sodium-ion batteries,but their electrochemical properties are highly related to compositional diversity.Diverse composite materials with various phase structures of P3,P2/P3,P2,P2/O3,and P2/P3/O3 were synthesized by manipulating the sodium content and calcination conditions,leading to the construction of a synthetic phase diagram for Na_(x)Ni_(0.25)Mn_(0.75)O_(2)(0.45≤x≤1.1).Then,we compared the electrochemical characteristics and structural evolution during the desodiation/sodiation process of P2,P2/P3,P2/03,and P2/P3/O3-Na_(x)Ni_(0.25)Mn_(0.75)O_(2).Among them,P2/P3-Na0.75Ni0.25Mn0.75O2exhibits the best rate capability of 90.9 mA h g^(-1)at 5 C,with an initial discharge capacity of 142.62 mA h g^(-1)at 0.1 C and a capacity retention rate of 78.25%after 100 cycles at 1 C in the voltage range of 2-4.3 V.The observed superior sodium storage performance of P2/P3 hybrids compared to other composite phases can be attributed to the enhanced Na^(+)transfer dynamic,reduction of the Jahn-teller effect,and improved reaction reversibility induced by the synergistic effect of P2 and P3 phases.The systematic research and exploration of phases in Na_(x)Ni_(0.25)Mn_(0.75)O_(2)provide new sights into high-performance nickel-manganese binary layered oxide for sodium-ion batteries.
文摘AIM To perform automatic gastric cancer risk classificationusing photofluorography for realizing effective mass screening as a preliminary study.METHODS We used data for 2100 subjects including X-ray images,pepsinogenⅠandⅡlevels,PGⅠ/PGⅡratio,Helicobacter pylori(H.pylori)antibody,H.pylori eradication history and interview sheets.We performed two-stage classification with our system.In the first stage,H.pylori infection status classification was performed,and H.pylori-infected subjects were automatically detected.In the second stage,we performed atrophic level classification to validate the effectiveness of our system.RESULTS Sensitivity,specificity and Youden index(YI)of H.pylori infection status classification were 0.884,0.895 and 0.779,respectively,in the first stage.In the second stage,sensitivity,specificity and YI of atrophic level classification for H.pylori-infected subjects were 0.777,0.824 and 0.601,respectively.CONCLUSION Although further improvements of the system are needed,experimental results indicated the effectiveness of machine learning techniques for estimation of gastric cancer risk.
文摘This study experimentally explores the flow around a cylinder with circular cross-section placed inside a bubble plume. Small gas bubbles with diameter smaller than 0.06 mm are released from electrodes on the bottom of a water tank by electrolysis of water. The bubbles induce water flow around them as they rise because of buoyancy. Inside the generated bubble plume, a cylinder with diameter D of 30 mm is placed at 6.5D above the electrodes. The bubbles and water flow around the cylinder are visualized, and the bubble velocity distribution is measured. The experiments elucidate the bubble behavior around the cylinder, the separated shear layers originating at the cylinder surface, their roll-up, the bubble entrainment in the resultant large-scale eddies behind the cylinder, and the vortex shedding from the cylinder.
