Functionally graded materials, including their characterization, properties and production methods are a new rapidly developing field of materials science. The aims of this review are to systematize the basic producti...Functionally graded materials, including their characterization, properties and production methods are a new rapidly developing field of materials science. The aims of this review are to systematize the basic production techniques for manufacturing functionally graded materials. Attention is paid to the principles for obtaining graded structure mainly in the metal based functionally graded materials. Several unpublished results obtained by the authors have been discussed briefly. Experimental methods and theoretical analysis for qualitative and quantitative estimation of graded properties have also been presented. The article can be useful for people who work in the field of functionally graded structures and materials, and who need a compact informative review of recent experimental and theoretical activity in this area.展开更多
Recent advances in scientific understanding of high-temperature materials processing using novel experimental methodologies have shed light on the complex role of surface and interface phenomena. New in-situ studies o...Recent advances in scientific understanding of high-temperature materials processing using novel experimental methodologies have shed light on the complex role of surface and interface phenomena. New in-situ studies on molten metal/solid ceramic interactions using a unique experimental complex at the Foundry Research Institute, Krakow, have revealed a number of unusual observations in materials processing at high temperatures. We present some such unusual observations and their explanation with reference to liquid metal processing of Al, Ni, and Ti, and their alloys in contact with oxide ceramics. In particular, we focus on the following aspects: primary oxidation of Al from residual water vapor or oxygen, capillary purification to remove surface oxide, substrate protection by CVD carbon, roughening due to spinel whisker formation, inclusions in castings due to mechanical detachment, floatation due to buoyancy forces, and segregation due to directional solidifciation, modification of the solid surface morphology by metal vapor ahead of the liquid, and the complication due to multi-component alloys melted in crucibles made from complex oxide-based ceramics. In the case of Ti, rapid reactions with oxides result in undesirable volumetric changes that create difficulty in casting high-quality Ti parts, particularly by investment casting. Nanoscale (e.g., colloidal) coatings based on Y2O3 protect crucibles and hold ladles against such attack. Practical insights and recommendations for materials processing emerging from the fundamental studies on high-temperature interfacial phenomena have been described.展开更多
In this work the process of manufacturing a continuously reinforced cast Al matrix composite and its properties are presented. The described technology permits obtaining a structural material of competitive properties...In this work the process of manufacturing a continuously reinforced cast Al matrix composite and its properties are presented. The described technology permits obtaining a structural material of competitive properties compared to either heat treatable aluminum alloys or polymer composites for several types of applications. The examined thermophysical properties and structural characterization, including material anisotropy, coupled with the results of previous measurements of the mechanical properties of both Al2O3 reinforcing filaments and metallic prepregs have proven the high quality of this material and the possibility of its operation under special loading modes and environmental conditions. Microscopic examinations (LM, SEM) were carried out to reveal the range of morphological homogeneity of the microstructure, the anisotropy of the filament band distribution, and simultaneously the adhesive behavior of the metal/fbier interface. The 3D morphology of the chosen microstructure components was revealed by computed tomography. The obtained results indicate that special properties of the examined prepreg materials have been strongly influenced, on the one hand, by the geometry of its internal microstructure, i.e. spatial distribution and volume fraction of the Al2O3 reinforcing filaments and, on the other hand, by a very good compatibility obtained between the individual metal prepreg components.展开更多
The issue of bonding formation in liquid metal/open-celled carbon foam(C_(of))systems was examined,taking into account the practical aspects of the synthesis of a new type of Mg-C metal material composite.The problem ...The issue of bonding formation in liquid metal/open-celled carbon foam(C_(of))systems was examined,taking into account the practical aspects of the synthesis of a new type of Mg-C metal material composite.The problem is complex due to the strong oxidation and intense evaporation of liquid magnesium,as well as the 3D geometry of the carbon component,where metal transport occurred through the foam cells’windows.Laboratory experiments performed at 700℃ in ceramic crucibles showed that spontaneous carbon foam infiltration by liquid metal is impossible under the applied conditions,either in an air atmosphere coupled with flux protection or under argon protection.Comparative tests performed in a UHV chamber filled with static pure Ar by a sessile drop method,coupled with non-contact heating and capillary purification at a test temperature of 700℃ directly in the UHV chamber,showed non-wetting behavior of the Mg/C_(of)couple with a correspondingly high contact angle of about 135°.The graphite capillary was then moved down,the liquid drop being slightly pressed into the foam,but these changes did not induce effective foam penetration.Despite the short contact time for the sessile drop test under an argon atmosphere,SEM+WDS analysis of the solidified Mg/C_(of)couple revealed the formation of an MgO interlayer at the interface,with a thickness of approx.1μm.The experimentally demonstrated presence of oxygen in the carbon foam sample,both before and after its contact with magnesium,points to oxide-type bonding being established between Mg and C_(of).This observation is in a good agreement with previous reports on the interface characterization of magnesium matrix composites reinforced with glassy carbon materials and carbon fibers by stir casting and pressure infiltration.Based on the findings of this study,a general structural scheme of the bonding process between carbon foam and liquid magnesium,as an important stage in the syntheses of Mg-C composites,was proposed.展开更多
Hot cracking during solidification can be a serious problem in aluminium casting alloys under certain conditions.This feature is well known,but still insuffi ciently investigated in shape casting.This study gives a br...Hot cracking during solidification can be a serious problem in aluminium casting alloys under certain conditions.This feature is well known,but still insuffi ciently investigated in shape casting.This study gives a brief overview of the factors inf luencing hot cracking during shape casting.Five different AlSi7MgCu alloys with varying Mg and Cu contents were examined.Theoretical models,including the cracking susceptibility coeffi cient(CSC)from Clyne and Davies,were considered.Thermodynamic calculations(terminal freezing range,TFR)of the behavior of the solid fraction during solidif ication were compared to an experimentbased hot cracking indexing(HCI)method.Scanning electron microscopy(SEM)was used to compare the existing microstructure and precipitated thermodynamic phases using the software ThermoCalc Classic(TCC).Furthermore,SEM was used to investigate crack surfaces initiated by a dog-bone shaped mold during casting.A good correlation between theoretical models and the experimental hot cracking index method was observed.展开更多
Three types of near-net shape casting alumi- num parts were investigated by computed tomography to determine casting defects and evaluate quality. The first, second, and third parts were produced by low-pressure die c...Three types of near-net shape casting alumi- num parts were investigated by computed tomography to determine casting defects and evaluate quality. The first, second, and third parts were produced by low-pressure die casting （Al-12Si-0.8Cu-0.5Fe-0.9Mg-0.7Ni-0.2Zn alloy）, die casting （A356, A1-7Si-0.3Mg）, and semi-solid casting （A356, A1-TSi-0.3Mg）, respectively. Unlike die casting （second part）, low-pressure die casting （first part） sig- nificantly reduced the formation of casting defects （i.e., porosity） due to its smooth filling and solidification under pressure. No significant casting defect was observed in the third part, and this absence of defects indicates that semi- solid casting could produce high-quality near-net shape casting aluminum parts. Moreover, casting defects were mostly distributed along the eutectic grain boundaries. This finding reveals that refinement of eutectic grains is necessary to optimize the distribution of casting defects and reduce their size. This investigation demonstrated that computed tomography is an efficient method to determine casting defects in near-net shape casting aluminum parts.展开更多
文摘Functionally graded materials, including their characterization, properties and production methods are a new rapidly developing field of materials science. The aims of this review are to systematize the basic production techniques for manufacturing functionally graded materials. Attention is paid to the principles for obtaining graded structure mainly in the metal based functionally graded materials. Several unpublished results obtained by the authors have been discussed briefly. Experimental methods and theoretical analysis for qualitative and quantitative estimation of graded properties have also been presented. The article can be useful for people who work in the field of functionally graded structures and materials, and who need a compact informative review of recent experimental and theoretical activity in this area.
文摘Recent advances in scientific understanding of high-temperature materials processing using novel experimental methodologies have shed light on the complex role of surface and interface phenomena. New in-situ studies on molten metal/solid ceramic interactions using a unique experimental complex at the Foundry Research Institute, Krakow, have revealed a number of unusual observations in materials processing at high temperatures. We present some such unusual observations and their explanation with reference to liquid metal processing of Al, Ni, and Ti, and their alloys in contact with oxide ceramics. In particular, we focus on the following aspects: primary oxidation of Al from residual water vapor or oxygen, capillary purification to remove surface oxide, substrate protection by CVD carbon, roughening due to spinel whisker formation, inclusions in castings due to mechanical detachment, floatation due to buoyancy forces, and segregation due to directional solidifciation, modification of the solid surface morphology by metal vapor ahead of the liquid, and the complication due to multi-component alloys melted in crucibles made from complex oxide-based ceramics. In the case of Ti, rapid reactions with oxides result in undesirable volumetric changes that create difficulty in casting high-quality Ti parts, particularly by investment casting. Nanoscale (e.g., colloidal) coatings based on Y2O3 protect crucibles and hold ladles against such attack. Practical insights and recommendations for materials processing emerging from the fundamental studies on high-temperature interfacial phenomena have been described.
文摘In this work the process of manufacturing a continuously reinforced cast Al matrix composite and its properties are presented. The described technology permits obtaining a structural material of competitive properties compared to either heat treatable aluminum alloys or polymer composites for several types of applications. The examined thermophysical properties and structural characterization, including material anisotropy, coupled with the results of previous measurements of the mechanical properties of both Al2O3 reinforcing filaments and metallic prepregs have proven the high quality of this material and the possibility of its operation under special loading modes and environmental conditions. Microscopic examinations (LM, SEM) were carried out to reveal the range of morphological homogeneity of the microstructure, the anisotropy of the filament band distribution, and simultaneously the adhesive behavior of the metal/fbier interface. The 3D morphology of the chosen microstructure components was revealed by computed tomography. The obtained results indicate that special properties of the examined prepreg materials have been strongly influenced, on the one hand, by the geometry of its internal microstructure, i.e. spatial distribution and volume fraction of the Al2O3 reinforcing filaments and, on the other hand, by a very good compatibility obtained between the individual metal prepreg components.
基金This research was funded by the Silesian University of Technology,Faculty of Materials Engineering as a part of statutory research for 2020.
文摘The issue of bonding formation in liquid metal/open-celled carbon foam(C_(of))systems was examined,taking into account the practical aspects of the synthesis of a new type of Mg-C metal material composite.The problem is complex due to the strong oxidation and intense evaporation of liquid magnesium,as well as the 3D geometry of the carbon component,where metal transport occurred through the foam cells’windows.Laboratory experiments performed at 700℃ in ceramic crucibles showed that spontaneous carbon foam infiltration by liquid metal is impossible under the applied conditions,either in an air atmosphere coupled with flux protection or under argon protection.Comparative tests performed in a UHV chamber filled with static pure Ar by a sessile drop method,coupled with non-contact heating and capillary purification at a test temperature of 700℃ directly in the UHV chamber,showed non-wetting behavior of the Mg/C_(of)couple with a correspondingly high contact angle of about 135°.The graphite capillary was then moved down,the liquid drop being slightly pressed into the foam,but these changes did not induce effective foam penetration.Despite the short contact time for the sessile drop test under an argon atmosphere,SEM+WDS analysis of the solidified Mg/C_(of)couple revealed the formation of an MgO interlayer at the interface,with a thickness of approx.1μm.The experimentally demonstrated presence of oxygen in the carbon foam sample,both before and after its contact with magnesium,points to oxide-type bonding being established between Mg and C_(of).This observation is in a good agreement with previous reports on the interface characterization of magnesium matrix composites reinforced with glassy carbon materials and carbon fibers by stir casting and pressure infiltration.Based on the findings of this study,a general structural scheme of the bonding process between carbon foam and liquid magnesium,as an important stage in the syntheses of Mg-C composites,was proposed.
基金financially supported by the Austrian Research Promotion Agency FFG
文摘Hot cracking during solidification can be a serious problem in aluminium casting alloys under certain conditions.This feature is well known,but still insuffi ciently investigated in shape casting.This study gives a brief overview of the factors inf luencing hot cracking during shape casting.Five different AlSi7MgCu alloys with varying Mg and Cu contents were examined.Theoretical models,including the cracking susceptibility coeffi cient(CSC)from Clyne and Davies,were considered.Thermodynamic calculations(terminal freezing range,TFR)of the behavior of the solid fraction during solidif ication were compared to an experimentbased hot cracking indexing(HCI)method.Scanning electron microscopy(SEM)was used to compare the existing microstructure and precipitated thermodynamic phases using the software ThermoCalc Classic(TCC).Furthermore,SEM was used to investigate crack surfaces initiated by a dog-bone shaped mold during casting.A good correlation between theoretical models and the experimental hot cracking index method was observed.
文摘Three types of near-net shape casting alumi- num parts were investigated by computed tomography to determine casting defects and evaluate quality. The first, second, and third parts were produced by low-pressure die casting （Al-12Si-0.8Cu-0.5Fe-0.9Mg-0.7Ni-0.2Zn alloy）, die casting （A356, A1-7Si-0.3Mg）, and semi-solid casting （A356, A1-TSi-0.3Mg）, respectively. Unlike die casting （second part）, low-pressure die casting （first part） sig- nificantly reduced the formation of casting defects （i.e., porosity） due to its smooth filling and solidification under pressure. No significant casting defect was observed in the third part, and this absence of defects indicates that semi- solid casting could produce high-quality near-net shape casting aluminum parts. Moreover, casting defects were mostly distributed along the eutectic grain boundaries. This finding reveals that refinement of eutectic grains is necessary to optimize the distribution of casting defects and reduce their size. This investigation demonstrated that computed tomography is an efficient method to determine casting defects in near-net shape casting aluminum parts.
