As a traditional metal-forming technology, casting/foundry has written a brilliant history chapter in the long development process of human society and civilization progress, leaving behind deep memories and symbols.
Microscale stray grains(MSGs),which are composed of misoriented and fragmented high-ordered dendrite arms,small-sized equiaxed grains,and columnar grains,are a novel grain defect that occurs within the shrouds of sing...Microscale stray grains(MSGs),which are composed of misoriented and fragmented high-ordered dendrite arms,small-sized equiaxed grains,and columnar grains,are a novel grain defect that occurs within the shrouds of single-crystal(SC)blades made from Ni-based superalloy.State-of-the-art non-destructive testing methods are incapable of detecting this defect,resulting in a high-risk application of SC blades.This study aims to control this defect by systematically investigating directional solidification processing parameters,shroud dimensions,and rhenium(Re)content in the formation of MSG defects.The results reveal that the defect forms exclusively at the overhanging extremities of the upper shrouds on the back side of the blades that face the heater.Increasing the withdrawal rate reduces the occurrence of MSG defects.As the shroud dimensions increase,MSG defects appear in the transition area between the downward suspended extremity of the blade shroud and the side of the blade body,as well as near the corner of the downward suspended extremity of the shroud.The occurrence of MSG defects increases with increasing shroud dimensions.Varying Re content sharply decreases the formation of MSG defects.A concentration-attached Rayleigh-Taylor instability(RTI)superheating(CARTISH)model,considering solidification shrinkage,was proposed to comprehend the formation of MSG defects.Simulation results based on this model are consistent with the experimentally observed distribution and degree of MSG defects under different conditions.Effective control of the CARTISH is critical to managing MSG defects.展开更多
In order to investigate the asymmetry of thermal conditions during directional solidification, the temperature evolution and correspondingly developed undercooling in a simplified single crystal blade cluster were num...In order to investigate the asymmetry of thermal conditions during directional solidification, the temperature evolution and correspondingly developed undercooling in a simplified single crystal blade cluster were numerically simulated. Simulation results demonstrate that the temperature distribution at the blade platforms is obviously asymmetrical. On the outside of the blade which directly faces the heating element, the liquidus(TL) isotherms progress relatively smoothly. On the inside of the blades facing the central rod, however, the TLisotherms are in concave shape and the slope goes upwards to the platform extremities. The average undercooling extent ?T and undercooling time ?t at the inside are much higher than those at the outside. It was then predicted that the inside platform extremities have significantly higher probabilities of stray grain formation compared to the outside ones. A corresponding experiment was carried out and the metallographic examination exhibited the same side-and height-dependence of stray grain formation in the blades as predicted. On the inside of the blades, all platforms are occupied by stray grains, while the platforms on the outside are nearly stray grain free. The simulation result agrees very well with the experimental observation.展开更多
Functionally graded materials, including their characterization, properties and production methods are a new rapidly developing field of materials science. The aims of this review are to systematize the basic producti...Functionally graded materials, including their characterization, properties and production methods are a new rapidly developing field of materials science. The aims of this review are to systematize the basic production techniques for manufacturing functionally graded materials. Attention is paid to the principles for obtaining graded structure mainly in the metal based functionally graded materials. Several unpublished results obtained by the authors have been discussed briefly. Experimental methods and theoretical analysis for qualitative and quantitative estimation of graded properties have also been presented. The article can be useful for people who work in the field of functionally graded structures and materials, and who need a compact informative review of recent experimental and theoretical activity in this area.展开更多
The grain density,Nv,in the solid state after solidification of AZ91/SiC composite is a function of maximum undercooling,ΔT,of a liquid alloy.This type of function depends on the characteristics of heterogeneous nucl...The grain density,Nv,in the solid state after solidification of AZ91/SiC composite is a function of maximum undercooling,ΔT,of a liquid alloy.This type of function depends on the characteristics of heterogeneous nucleation sites and number of SiC present in the alloy.The aim of this paper was selection of parameters for the model describing the relationship between the grain density of primary phase and undercooling.This model in connection with model of crystallisation,which is based on chemical elements diffusion and grain interface kinetics,can be used to predict casting quality and its microstructure.Nucleation models have parameters,which exact values are usually not known and sometimes even their physical meaning is under discussion.Those parameters can be obtained after mathematical analysis of the experimental data.The composites with 0,1,2,3 and 4wt.% of SiC particles were prepared.The AZ91 alloy was a matrix of the composite reinforcement SiC particles.This composite was cast to prepare four different thickness plates.They were taken from the region near to the thermocouple,to analyze the undercooling for different composites and thickness plates and its influence on the grain size.The microstructure and thermal analysis gave set of values that connect mass fraction of SiC particles,and undercooling with grain size.These values were used to approximate nucleation model adjustment parameters.Obtained model can be very useful in modelling composites microstructure.展开更多
Recent advances in scientific understanding of high-temperature materials processing using novel experimental methodologies have shed light on the complex role of surface and interface phenomena. New in-situ studies o...Recent advances in scientific understanding of high-temperature materials processing using novel experimental methodologies have shed light on the complex role of surface and interface phenomena. New in-situ studies on molten metal/solid ceramic interactions using a unique experimental complex at the Foundry Research Institute, Krakow, have revealed a number of unusual observations in materials processing at high temperatures. We present some such unusual observations and their explanation with reference to liquid metal processing of Al, Ni, and Ti, and their alloys in contact with oxide ceramics. In particular, we focus on the following aspects: primary oxidation of Al from residual water vapor or oxygen, capillary purification to remove surface oxide, substrate protection by CVD carbon, roughening due to spinel whisker formation, inclusions in castings due to mechanical detachment, floatation due to buoyancy forces, and segregation due to directional solidifciation, modification of the solid surface morphology by metal vapor ahead of the liquid, and the complication due to multi-component alloys melted in crucibles made from complex oxide-based ceramics. In the case of Ti, rapid reactions with oxides result in undesirable volumetric changes that create difficulty in casting high-quality Ti parts, particularly by investment casting. Nanoscale (e.g., colloidal) coatings based on Y2O3 protect crucibles and hold ladles against such attack. Practical insights and recommendations for materials processing emerging from the fundamental studies on high-temperature interfacial phenomena have been described.展开更多
Within the project "Functional Surfaces via Micro-and Nanoscaled Structures" which is part of the Cluster of Excellence "Integrative Production Technology" established and financed by the German Re...Within the project "Functional Surfaces via Micro-and Nanoscaled Structures" which is part of the Cluster of Excellence "Integrative Production Technology" established and financed by the German Research Foundation (DFG),an investment casting process to produce 3-dimensional functional surfaces down to a structural size of 1μm on near-net-shape-casting parts has been developed.The common way to realize functional microstructures on metallic surfaces is to use laser ablation,electro discharge machining or micro milling.The handicap of these processes is their limited productivity.The approach of this project to raise the efficiency is to use the investment casting process to replicate microstructured surfaces by moulding from a laser-microstructured grand master pattern.The main research objective deals with the investigation of the single process steps of the investment casting process with regard to the moulding accuracy.Actual results concerning making of the wax pattern,suitability of ceramic mould and core materials for casting of an AlSi7Mg0.3 alloy as well as the knock-out behavior of the shells are presented.By using of the example of an intake manifold of a gasoline race car engine,a technical shark skin surface has been realized to reduce the drag of the intake air.The intake manifold consists of an air-restrictor with a defined inner diameter which is microstructured with technical shark skin riblets.For this reason the inner diameter cannot be drilled after casting and demands a very high accuracy of the casting part.A technology for the fabrication and demoulding of accurate microstructured castings are shown.Shrinkage factors of different moulding steps of the macroscopic casting part as well as the microscopic riblet structure have been examined as well.展开更多
In this work the process of manufacturing a continuously reinforced cast Al matrix composite and its properties are presented. The described technology permits obtaining a structural material of competitive properties...In this work the process of manufacturing a continuously reinforced cast Al matrix composite and its properties are presented. The described technology permits obtaining a structural material of competitive properties compared to either heat treatable aluminum alloys or polymer composites for several types of applications. The examined thermophysical properties and structural characterization, including material anisotropy, coupled with the results of previous measurements of the mechanical properties of both Al2O3 reinforcing filaments and metallic prepregs have proven the high quality of this material and the possibility of its operation under special loading modes and environmental conditions. Microscopic examinations (LM, SEM) were carried out to reveal the range of morphological homogeneity of the microstructure, the anisotropy of the filament band distribution, and simultaneously the adhesive behavior of the metal/fbier interface. The 3D morphology of the chosen microstructure components was revealed by computed tomography. The obtained results indicate that special properties of the examined prepreg materials have been strongly influenced, on the one hand, by the geometry of its internal microstructure, i.e. spatial distribution and volume fraction of the Al2O3 reinforcing filaments and, on the other hand, by a very good compatibility obtained between the individual metal prepreg components.展开更多
The cooling channel process is a rehocasting method by which the prematerial with globular microstructure can be produced to fit the thixocasting process.A three-phase model based on volume averaging approach is propo...The cooling channel process is a rehocasting method by which the prematerial with globular microstructure can be produced to fit the thixocasting process.A three-phase model based on volume averaging approach is proposed to simulate the cooling channel process of A356 Aluminum alloy.The three phases are liquid,solid and air respectively and treated as separated and interacting continua,sharing a single pressure field.The mass,momentum,enthalpy transport equations for each phase are solved.The developed model can predict the evolution of liquid,solid and air fraction as well as the distribution of grain density and grain size.The effect of pouring temperature on the grain density,grain size and solid fraction is analyzed in detail.展开更多
Effects of current pulses on superplasticity of cold rolled and 500℃,30min recrystallized states of 2091 Al-Li alloy were investigated.The tension results showed that current pulses made the elongation of 500℃,30 mi...Effects of current pulses on superplasticity of cold rolled and 500℃,30min recrystallized states of 2091 Al-Li alloy were investigated.The tension results showed that current pulses made the elongation of 500℃,30 min recrystallized specimens increase fromô=290%toδ=390%,and the optimum strain rate of superplastic deformation in cold rolled specimens increase from=5.0x10-’s-'to topr=8.33X10-’s-',with the same 8m...Investigations of me-chanical behaviors indicated that current pulses enhanced the stress strain rate sensitivity expo-nent(500℃,30min recrystallized state)and pushed the value of mmax towards high strain rate region(cold rolled state).Electron probe analyses showed that current pulses made the solute atom Cu distribute more homogeneously.It was indicated that the enhancement of m value at high strain rate by applying current pulses was because homogeneously distributed solute atoms increased the stress strain rate sensitivity.展开更多
The issue of bonding formation in liquid metal/open-celled carbon foam(C_(of))systems was examined,taking into account the practical aspects of the synthesis of a new type of Mg-C metal material composite.The problem ...The issue of bonding formation in liquid metal/open-celled carbon foam(C_(of))systems was examined,taking into account the practical aspects of the synthesis of a new type of Mg-C metal material composite.The problem is complex due to the strong oxidation and intense evaporation of liquid magnesium,as well as the 3D geometry of the carbon component,where metal transport occurred through the foam cells’windows.Laboratory experiments performed at 700℃ in ceramic crucibles showed that spontaneous carbon foam infiltration by liquid metal is impossible under the applied conditions,either in an air atmosphere coupled with flux protection or under argon protection.Comparative tests performed in a UHV chamber filled with static pure Ar by a sessile drop method,coupled with non-contact heating and capillary purification at a test temperature of 700℃ directly in the UHV chamber,showed non-wetting behavior of the Mg/C_(of)couple with a correspondingly high contact angle of about 135°.The graphite capillary was then moved down,the liquid drop being slightly pressed into the foam,but these changes did not induce effective foam penetration.Despite the short contact time for the sessile drop test under an argon atmosphere,SEM+WDS analysis of the solidified Mg/C_(of)couple revealed the formation of an MgO interlayer at the interface,with a thickness of approx.1μm.The experimentally demonstrated presence of oxygen in the carbon foam sample,both before and after its contact with magnesium,points to oxide-type bonding being established between Mg and C_(of).This observation is in a good agreement with previous reports on the interface characterization of magnesium matrix composites reinforced with glassy carbon materials and carbon fibers by stir casting and pressure infiltration.Based on the findings of this study,a general structural scheme of the bonding process between carbon foam and liquid magnesium,as an important stage in the syntheses of Mg-C composites,was proposed.展开更多
Distinguished Colleagues：With the trust and support by WFO and its members, Foundry Institution of Chinese Mechanical Engineering Society （FICMES） will be the host of the 69th World Foundry Congress （WFC2010）. We...Distinguished Colleagues：With the trust and support by WFO and its members, Foundry Institution of Chinese Mechanical Engineering Society （FICMES） will be the host of the 69th World Foundry Congress （WFC2010）. We cordially invite you to participate in the 69th WFC to be held in Hangzhou, China in October, 2010.展开更多
The compression tests of semi-solid AZ91D Mg alloy have been conducted on a parallel-plate viscometer. The results are as follows. With increasing the compression temperature, the deformation rate or the strain rate o...The compression tests of semi-solid AZ91D Mg alloy have been conducted on a parallel-plate viscometer. The results are as follows. With increasing the compression temperature, the deformation rate or the strain rate of the specimens rises, but the compressive stress continuously decreases; the deformation strain is obviously linear with the compressive stress and independent on compression temperature under a given compression load. In the wake of the compression load being added, the compressive strain increases but the compressive stress decreases clearly; the deformation strain is obviously linear with the compressive stress under different compression load. The mathematical apparent viscosity model about the semi-solid compressed AZ91D Mg alloy has been established, i.e ηapp =2004.2exp（15.61 fs）γ^1.317.fn^-1.3511展开更多
Forging is state-of-the-art for producing hand tools on an industrial scale.Due to high demands on the stiffness and the fracture toughness,high-strength forging steels were used to provide cavity-free components with...Forging is state-of-the-art for producing hand tools on an industrial scale.Due to high demands on the stiffness and the fracture toughness,high-strength forging steels were used to provide cavity-free components with high mechanical load capacity.Moreover,forging is a cost-effective mass production process but,in spite of all its advantages,it has its limitations,e.g.in the freedom of designs.However,because of the extreme thermal loading(particularly with regard to permanent moulds) and the frequently unavoidable casting defects,hand tools are not cast.By means of thixocasting steel,technical difficulties can be reduced and new options are provided which allow the manufacturing of components with much higher complexity than that using forging.Through near-net shape production,manufacturing steps and costs can be reduced.Furthermore,steels,which are difficult to forge but nonetheless have high potential for specific applications(such as high strength or corrosion resistant steels),can also be processed.In cooperation with industrial partners,X39CrMo17 stainless steel combination spanners with 17 mm width across flats were thixocast.Forming dies were designed and optimized by simulation,the hot forming X38CrMoV5 tool steel as well as the molybdenum alloy TZM were selected as the tool alloys.The dies were treated by a plasma nitriding process and subsequently coated with crystalline Al2O3 protective coatings by plasma-enhanced chemical vapor deposition(PECVD).During the experiments,combination spanners were successfully cast in the semi-solid state.Cast parts were heat-treated to enhance the toughness of components,which was subsequently measured by a standardized torque test.Moreover,a hypothetical approach of a possible,industrial batch process was carried out using the simulation software MAGMAsoft.展开更多
Hot cracking during solidification can be a serious problem in aluminium casting alloys under certain conditions.This feature is well known,but still insuffi ciently investigated in shape casting.This study gives a br...Hot cracking during solidification can be a serious problem in aluminium casting alloys under certain conditions.This feature is well known,but still insuffi ciently investigated in shape casting.This study gives a brief overview of the factors inf luencing hot cracking during shape casting.Five different AlSi7MgCu alloys with varying Mg and Cu contents were examined.Theoretical models,including the cracking susceptibility coeffi cient(CSC)from Clyne and Davies,were considered.Thermodynamic calculations(terminal freezing range,TFR)of the behavior of the solid fraction during solidif ication were compared to an experimentbased hot cracking indexing(HCI)method.Scanning electron microscopy(SEM)was used to compare the existing microstructure and precipitated thermodynamic phases using the software ThermoCalc Classic(TCC).Furthermore,SEM was used to investigate crack surfaces initiated by a dog-bone shaped mold during casting.A good correlation between theoretical models and the experimental hot cracking index method was observed.展开更多
The working meeting of Composites Committee of Foundry Institution of Chinese Mechanical Engineering Society (FICMES) was held on July 25th, 2004 in Kunming, Yunnan Province. The newly elected committee members attend...The working meeting of Composites Committee of Foundry Institution of Chinese Mechanical Engineering Society (FICMES) was held on July 25th, 2004 in Kunming, Yunnan Province. The newly elected committee members attended the meeting. The committee consists of 27 members from universities, research institutions and enterprises. The meeting was presided over by deputy-director of Composites Committee of FICMES, Prof. Ye PAN from Southeast University. He also briefly introduced the Composites Committee development amt academic activities. Prof. Shifang SU,展开更多
文摘As a traditional metal-forming technology, casting/foundry has written a brilliant history chapter in the long development process of human society and civilization progress, leaving behind deep memories and symbols.
基金supported by the National Youth Talent Support Program,the National Science and Technology Major Project(No.HT-J2019-VI-0020-0136)the Excellent Youth Foundation of Shaanxi Province of China(No.2021JC-08)+1 种基金the Natural Science Basic Research Plan in Shaanxi Province of China(No.2022JQ-553)the China Postdoctoral Science Foundation(No.2021M692555).
文摘Microscale stray grains(MSGs),which are composed of misoriented and fragmented high-ordered dendrite arms,small-sized equiaxed grains,and columnar grains,are a novel grain defect that occurs within the shrouds of single-crystal(SC)blades made from Ni-based superalloy.State-of-the-art non-destructive testing methods are incapable of detecting this defect,resulting in a high-risk application of SC blades.This study aims to control this defect by systematically investigating directional solidification processing parameters,shroud dimensions,and rhenium(Re)content in the formation of MSG defects.The results reveal that the defect forms exclusively at the overhanging extremities of the upper shrouds on the back side of the blades that face the heater.Increasing the withdrawal rate reduces the occurrence of MSG defects.As the shroud dimensions increase,MSG defects appear in the transition area between the downward suspended extremity of the blade shroud and the side of the blade body,as well as near the corner of the downward suspended extremity of the shroud.The occurrence of MSG defects increases with increasing shroud dimensions.Varying Re content sharply decreases the formation of MSG defects.A concentration-attached Rayleigh-Taylor instability(RTI)superheating(CARTISH)model,considering solidification shrinkage,was proposed to comprehend the formation of MSG defects.Simulation results based on this model are consistent with the experimentally observed distribution and degree of MSG defects under different conditions.Effective control of the CARTISH is critical to managing MSG defects.
基金supported by the“Shenzhen Peacock Plan”the“Guangdong Innovative&Entrepreneurial Research Team Program”
文摘In order to investigate the asymmetry of thermal conditions during directional solidification, the temperature evolution and correspondingly developed undercooling in a simplified single crystal blade cluster were numerically simulated. Simulation results demonstrate that the temperature distribution at the blade platforms is obviously asymmetrical. On the outside of the blade which directly faces the heating element, the liquidus(TL) isotherms progress relatively smoothly. On the inside of the blades facing the central rod, however, the TLisotherms are in concave shape and the slope goes upwards to the platform extremities. The average undercooling extent ?T and undercooling time ?t at the inside are much higher than those at the outside. It was then predicted that the inside platform extremities have significantly higher probabilities of stray grain formation compared to the outside ones. A corresponding experiment was carried out and the metallographic examination exhibited the same side-and height-dependence of stray grain formation in the blades as predicted. On the inside of the blades, all platforms are occupied by stray grains, while the platforms on the outside are nearly stray grain free. The simulation result agrees very well with the experimental observation.
文摘Functionally graded materials, including their characterization, properties and production methods are a new rapidly developing field of materials science. The aims of this review are to systematize the basic production techniques for manufacturing functionally graded materials. Attention is paid to the principles for obtaining graded structure mainly in the metal based functionally graded materials. Several unpublished results obtained by the authors have been discussed briefly. Experimental methods and theoretical analysis for qualitative and quantitative estimation of graded properties have also been presented. The article can be useful for people who work in the field of functionally graded structures and materials, and who need a compact informative review of recent experimental and theoretical activity in this area.
基金supported financially by the European Community under Marie Curie Transfer of Knowledge grant No. MTKD-CT-2006-042468 (AGH No.27.27.170.304)Polish Ministry of Science and Higher Education for financial support under grant No. N507-44-66-34 (AGH No.18.18.170.325)
文摘The grain density,Nv,in the solid state after solidification of AZ91/SiC composite is a function of maximum undercooling,ΔT,of a liquid alloy.This type of function depends on the characteristics of heterogeneous nucleation sites and number of SiC present in the alloy.The aim of this paper was selection of parameters for the model describing the relationship between the grain density of primary phase and undercooling.This model in connection with model of crystallisation,which is based on chemical elements diffusion and grain interface kinetics,can be used to predict casting quality and its microstructure.Nucleation models have parameters,which exact values are usually not known and sometimes even their physical meaning is under discussion.Those parameters can be obtained after mathematical analysis of the experimental data.The composites with 0,1,2,3 and 4wt.% of SiC particles were prepared.The AZ91 alloy was a matrix of the composite reinforcement SiC particles.This composite was cast to prepare four different thickness plates.They were taken from the region near to the thermocouple,to analyze the undercooling for different composites and thickness plates and its influence on the grain size.The microstructure and thermal analysis gave set of values that connect mass fraction of SiC particles,and undercooling with grain size.These values were used to approximate nucleation model adjustment parameters.Obtained model can be very useful in modelling composites microstructure.
文摘Recent advances in scientific understanding of high-temperature materials processing using novel experimental methodologies have shed light on the complex role of surface and interface phenomena. New in-situ studies on molten metal/solid ceramic interactions using a unique experimental complex at the Foundry Research Institute, Krakow, have revealed a number of unusual observations in materials processing at high temperatures. We present some such unusual observations and their explanation with reference to liquid metal processing of Al, Ni, and Ti, and their alloys in contact with oxide ceramics. In particular, we focus on the following aspects: primary oxidation of Al from residual water vapor or oxygen, capillary purification to remove surface oxide, substrate protection by CVD carbon, roughening due to spinel whisker formation, inclusions in castings due to mechanical detachment, floatation due to buoyancy forces, and segregation due to directional solidifciation, modification of the solid surface morphology by metal vapor ahead of the liquid, and the complication due to multi-component alloys melted in crucibles made from complex oxide-based ceramics. In the case of Ti, rapid reactions with oxides result in undesirable volumetric changes that create difficulty in casting high-quality Ti parts, particularly by investment casting. Nanoscale (e.g., colloidal) coatings based on Y2O3 protect crucibles and hold ladles against such attack. Practical insights and recommendations for materials processing emerging from the fundamental studies on high-temperature interfacial phenomena have been described.
基金supported by the German Research Foundation DFG within the Cluster of Excellence "Integrative Production Technology for High-Wage Countries
文摘Within the project "Functional Surfaces via Micro-and Nanoscaled Structures" which is part of the Cluster of Excellence "Integrative Production Technology" established and financed by the German Research Foundation (DFG),an investment casting process to produce 3-dimensional functional surfaces down to a structural size of 1μm on near-net-shape-casting parts has been developed.The common way to realize functional microstructures on metallic surfaces is to use laser ablation,electro discharge machining or micro milling.The handicap of these processes is their limited productivity.The approach of this project to raise the efficiency is to use the investment casting process to replicate microstructured surfaces by moulding from a laser-microstructured grand master pattern.The main research objective deals with the investigation of the single process steps of the investment casting process with regard to the moulding accuracy.Actual results concerning making of the wax pattern,suitability of ceramic mould and core materials for casting of an AlSi7Mg0.3 alloy as well as the knock-out behavior of the shells are presented.By using of the example of an intake manifold of a gasoline race car engine,a technical shark skin surface has been realized to reduce the drag of the intake air.The intake manifold consists of an air-restrictor with a defined inner diameter which is microstructured with technical shark skin riblets.For this reason the inner diameter cannot be drilled after casting and demands a very high accuracy of the casting part.A technology for the fabrication and demoulding of accurate microstructured castings are shown.Shrinkage factors of different moulding steps of the macroscopic casting part as well as the microscopic riblet structure have been examined as well.
文摘In this work the process of manufacturing a continuously reinforced cast Al matrix composite and its properties are presented. The described technology permits obtaining a structural material of competitive properties compared to either heat treatable aluminum alloys or polymer composites for several types of applications. The examined thermophysical properties and structural characterization, including material anisotropy, coupled with the results of previous measurements of the mechanical properties of both Al2O3 reinforcing filaments and metallic prepregs have proven the high quality of this material and the possibility of its operation under special loading modes and environmental conditions. Microscopic examinations (LM, SEM) were carried out to reveal the range of morphological homogeneity of the microstructure, the anisotropy of the filament band distribution, and simultaneously the adhesive behavior of the metal/fbier interface. The 3D morphology of the chosen microstructure components was revealed by computed tomography. The obtained results indicate that special properties of the examined prepreg materials have been strongly influenced, on the one hand, by the geometry of its internal microstructure, i.e. spatial distribution and volume fraction of the Al2O3 reinforcing filaments and, on the other hand, by a very good compatibility obtained between the individual metal prepreg components.
文摘The cooling channel process is a rehocasting method by which the prematerial with globular microstructure can be produced to fit the thixocasting process.A three-phase model based on volume averaging approach is proposed to simulate the cooling channel process of A356 Aluminum alloy.The three phases are liquid,solid and air respectively and treated as separated and interacting continua,sharing a single pressure field.The mass,momentum,enthalpy transport equations for each phase are solved.The developed model can predict the evolution of liquid,solid and air fraction as well as the distribution of grain density and grain size.The effect of pouring temperature on the grain density,grain size and solid fraction is analyzed in detail.
基金supported by Doctor's Foundation of Education Committee of China
文摘Effects of current pulses on superplasticity of cold rolled and 500℃,30min recrystallized states of 2091 Al-Li alloy were investigated.The tension results showed that current pulses made the elongation of 500℃,30 min recrystallized specimens increase fromô=290%toδ=390%,and the optimum strain rate of superplastic deformation in cold rolled specimens increase from=5.0x10-’s-'to topr=8.33X10-’s-',with the same 8m...Investigations of me-chanical behaviors indicated that current pulses enhanced the stress strain rate sensitivity expo-nent(500℃,30min recrystallized state)and pushed the value of mmax towards high strain rate region(cold rolled state).Electron probe analyses showed that current pulses made the solute atom Cu distribute more homogeneously.It was indicated that the enhancement of m value at high strain rate by applying current pulses was because homogeneously distributed solute atoms increased the stress strain rate sensitivity.
基金This research was funded by the Silesian University of Technology,Faculty of Materials Engineering as a part of statutory research for 2020.
文摘The issue of bonding formation in liquid metal/open-celled carbon foam(C_(of))systems was examined,taking into account the practical aspects of the synthesis of a new type of Mg-C metal material composite.The problem is complex due to the strong oxidation and intense evaporation of liquid magnesium,as well as the 3D geometry of the carbon component,where metal transport occurred through the foam cells’windows.Laboratory experiments performed at 700℃ in ceramic crucibles showed that spontaneous carbon foam infiltration by liquid metal is impossible under the applied conditions,either in an air atmosphere coupled with flux protection or under argon protection.Comparative tests performed in a UHV chamber filled with static pure Ar by a sessile drop method,coupled with non-contact heating and capillary purification at a test temperature of 700℃ directly in the UHV chamber,showed non-wetting behavior of the Mg/C_(of)couple with a correspondingly high contact angle of about 135°.The graphite capillary was then moved down,the liquid drop being slightly pressed into the foam,but these changes did not induce effective foam penetration.Despite the short contact time for the sessile drop test under an argon atmosphere,SEM+WDS analysis of the solidified Mg/C_(of)couple revealed the formation of an MgO interlayer at the interface,with a thickness of approx.1μm.The experimentally demonstrated presence of oxygen in the carbon foam sample,both before and after its contact with magnesium,points to oxide-type bonding being established between Mg and C_(of).This observation is in a good agreement with previous reports on the interface characterization of magnesium matrix composites reinforced with glassy carbon materials and carbon fibers by stir casting and pressure infiltration.Based on the findings of this study,a general structural scheme of the bonding process between carbon foam and liquid magnesium,as an important stage in the syntheses of Mg-C composites,was proposed.
文摘Distinguished Colleagues：With the trust and support by WFO and its members, Foundry Institution of Chinese Mechanical Engineering Society （FICMES） will be the host of the 69th World Foundry Congress （WFC2010）. We cordially invite you to participate in the 69th WFC to be held in Hangzhou, China in October, 2010.
文摘The compression tests of semi-solid AZ91D Mg alloy have been conducted on a parallel-plate viscometer. The results are as follows. With increasing the compression temperature, the deformation rate or the strain rate of the specimens rises, but the compressive stress continuously decreases; the deformation strain is obviously linear with the compressive stress and independent on compression temperature under a given compression load. In the wake of the compression load being added, the compressive strain increases but the compressive stress decreases clearly; the deformation strain is obviously linear with the compressive stress under different compression load. The mathematical apparent viscosity model about the semi-solid compressed AZ91D Mg alloy has been established, i.e ηapp =2004.2exp（15.61 fs）γ^1.317.fn^-1.3511
基金the German Research Foundation (DFG),which supports this work within the framework of the collaborative research centre SFB 289
文摘Forging is state-of-the-art for producing hand tools on an industrial scale.Due to high demands on the stiffness and the fracture toughness,high-strength forging steels were used to provide cavity-free components with high mechanical load capacity.Moreover,forging is a cost-effective mass production process but,in spite of all its advantages,it has its limitations,e.g.in the freedom of designs.However,because of the extreme thermal loading(particularly with regard to permanent moulds) and the frequently unavoidable casting defects,hand tools are not cast.By means of thixocasting steel,technical difficulties can be reduced and new options are provided which allow the manufacturing of components with much higher complexity than that using forging.Through near-net shape production,manufacturing steps and costs can be reduced.Furthermore,steels,which are difficult to forge but nonetheless have high potential for specific applications(such as high strength or corrosion resistant steels),can also be processed.In cooperation with industrial partners,X39CrMo17 stainless steel combination spanners with 17 mm width across flats were thixocast.Forming dies were designed and optimized by simulation,the hot forming X38CrMoV5 tool steel as well as the molybdenum alloy TZM were selected as the tool alloys.The dies were treated by a plasma nitriding process and subsequently coated with crystalline Al2O3 protective coatings by plasma-enhanced chemical vapor deposition(PECVD).During the experiments,combination spanners were successfully cast in the semi-solid state.Cast parts were heat-treated to enhance the toughness of components,which was subsequently measured by a standardized torque test.Moreover,a hypothetical approach of a possible,industrial batch process was carried out using the simulation software MAGMAsoft.
基金financially supported by the Austrian Research Promotion Agency FFG
文摘Hot cracking during solidification can be a serious problem in aluminium casting alloys under certain conditions.This feature is well known,but still insuffi ciently investigated in shape casting.This study gives a brief overview of the factors inf luencing hot cracking during shape casting.Five different AlSi7MgCu alloys with varying Mg and Cu contents were examined.Theoretical models,including the cracking susceptibility coeffi cient(CSC)from Clyne and Davies,were considered.Thermodynamic calculations(terminal freezing range,TFR)of the behavior of the solid fraction during solidif ication were compared to an experimentbased hot cracking indexing(HCI)method.Scanning electron microscopy(SEM)was used to compare the existing microstructure and precipitated thermodynamic phases using the software ThermoCalc Classic(TCC).Furthermore,SEM was used to investigate crack surfaces initiated by a dog-bone shaped mold during casting.A good correlation between theoretical models and the experimental hot cracking index method was observed.
文摘The working meeting of Composites Committee of Foundry Institution of Chinese Mechanical Engineering Society (FICMES) was held on July 25th, 2004 in Kunming, Yunnan Province. The newly elected committee members attended the meeting. The committee consists of 27 members from universities, research institutions and enterprises. The meeting was presided over by deputy-director of Composites Committee of FICMES, Prof. Ye PAN from Southeast University. He also briefly introduced the Composites Committee development amt academic activities. Prof. Shifang SU,
