Crustal movement and incremental-movement data observed repeatedly at GPS stations during 1999 -2009 were analyzed to study the effect of two earthquakes of Ms8.1 and Ms8.0 that occurred in 2001 and 2008, respectively...Crustal movement and incremental-movement data observed repeatedly at GPS stations during 1999 -2009 were analyzed to study the effect of two earthquakes of Ms8.1 and Ms8.0 that occurred in 2001 and 2008, respectively, in Qinghai-Tibet sub-plate and its eastern margin. The result revealed certain anoma- lous pre-earthquake deformation and some large co-seismic changes. Prior to the 2008 Wcnchuan Ms8.0 earthquake, the seismogenic Kunlunshan fault zone became a geographic boundary between different regional movements. At the time of the earthquake, there was an average cross-fault crustal shortening of - 1.04 m and an average right-lateral strike slip of 0.76 m along the ruptured segment, as well as a strain-energy release of -62.66 ×10.7.展开更多
Using Global Positioning System(GPS) data to analyze the earthquake preparation characteristics of the Kunlun Ms8.1 and the Wenchuan Ms8.0 earthquakes, we review the main research developments of earthquake forecastin...Using Global Positioning System(GPS) data to analyze the earthquake preparation characteristics of the Kunlun Ms8.1 and the Wenchuan Ms8.0 earthquakes, we review the main research developments of earthquake forecasting and the mechanisms of earthquake preparation using crustal deformation data from recent periods, and discuss the similarities and differences in the scientific approaches adopted by the Chinese and foreign scholars. We then analyze the deformation characteristics of earthquake preparation, with respect to slip and dip-slip faults. Our results show that, in order to understand the relationship between crustal deformation and earthquake preparation, research focus should be expanded from fault-scale to larger scale regions. Furthermore, the dynamic deformation characteristics associated with earthquake preparation must be considered as a multiscale, spatial-temporal process, in order to obtain the necessary criteria for strong earthquake forecasts.展开更多
In order to track the space-time variation of regional strain field holistically(in a large scale) and to describe the regional movement field more objectively,the paper uses a nonlinear continuous strain model focuse...In order to track the space-time variation of regional strain field holistically(in a large scale) and to describe the regional movement field more objectively,the paper uses a nonlinear continuous strain model focused on extracting medium-low frequency strain information on the basis of a region with no rotation.According to the repeated measurements(1999～2001～2004) from GPS monitoring stations in the Sichuan and Yunnan area obtained by the Project of "China Crust Movement Measuring Network",and with the movement of 1999～2001(stage deformation background) as the basic reference,we separated the main influencing factors of the Kunlun Mountain M-S8.1 earthquake in 2001 from the data of 2001 and 2004,and the results indicate:(1) the Kunlun Mountain M-S8.1 earthquake has a discriminating effect on the Sichuan and Yunnan area,moreover,the deformation mode and background had not only certain similitude but also some diversity;(2) The movement field before the earthquake was very ordinal,while after the earthquake,order and disorder existed simultaneously in the displacement field;The displacement quantities of GPS monitoring stations were generally several millimeters;(3) The principal strain field before earthquake was basically tensile in an approximate EW direction and compressive in the SN direction,and tension was predominant.After the earthquake,the principal strain field in the Sichuan area was compressive in the EW direction and tensile in the SN direction,and the compression was predominant.In the Yunnan area,it was tensional in the NE direction and compressive in the NW direction,and tension was predominant;(4) The surficial strain before the earthquake was dominated by superficial expansion,the contractive area being located basically in the east boundary of Sichuan and Yunnan block and its neighborhood.After the earthquake,the Sichuan area was surface contractive(the further north,the greater it was),and south of it was an area of superficial expansion.Generally speaking,the Kunlun Mountain M-S8.1 earthquake played an active role in the accumulation of energy in the Sichuan and Yunnan area.Special attention shall be focused on the segment of Xichang-Dongchuan and its neighborhood.展开更多
The Daliangshan tectonic zone is a rhombic area to the east of the Anninghe and Zemuhe fault zones in the middle segment of the Xianshuihe-Xiaojiang fault system along the southeast margin of the Qinghai-Xizang （Tibe...The Daliangshan tectonic zone is a rhombic area to the east of the Anninghe and Zemuhe fault zones in the middle segment of the Xianshuihe-Xiaojiang fault system along the southeast margin of the Qinghai-Xizang （Tibet） Plateau. Since the Cenozoic era, the neotectonic deformation in the Daliangshan tectonic zone has presented not only sinistral slip and reverse faulting along the Daliangshan fault zone, but also proximate SN-trending crust shortening. It is estimated that the average crust shortening in the Daliangshan tectonic zone is 10.9 ± 1.6 km, with a shortening rate of 17.8 ± 2.2% using the method of balanced cross-sections. The crust shortening from folding occurred mainly in the Miocene and the Pliocene periods, lasting no more than 8.6 Ma. Based on this, a crust shortening velocity of 1.3 ± 0.2 mm/a can be estimated. Compared with the left offset along the Daliangshan fault zone, it is recognized that crust shortening by folding plays an important part in transferring crustal deformation southeastward along the Xianshulhe-Xiaojiang fault system.展开更多
Based on GPS data from 1991- 2004 and the least-squares collocation method,we analyze the crustal deformation in the Chinese mainland. The results show that the first-order crustal deformation is unchanged in differen...Based on GPS data from 1991- 2004 and the least-squares collocation method,we analyze the crustal deformation in the Chinese mainland. The results show that the first-order crustal deformation is unchanged in different periods in the Chinese mainland,which reflects the background of regional tectonic activity. The strain rate is much higher in Western China,especially in the Qinghai-Tibetan Plateau and Sichuan-Yunnan area. The variations in different periods are related with seismicity of strong earthquakes during the same time. The GPS data after 2004 shows the post-seismic deformation of the 2001 Kunlun Mountains M S8. 1 earthquake.展开更多
On the basis of the GPS data obtained from repeated measurements carried out in 2004 and 2007,the horizontal principal strain of the Chinese mainland is calculated,which shows that the direction of principal compressi...On the basis of the GPS data obtained from repeated measurements carried out in 2004 and 2007,the horizontal principal strain of the Chinese mainland is calculated,which shows that the direction of principal compressive strain axis of each subplate is basically consistent with the P-axis of focal mechanism solution and the principal compressive stress axis acquired by geological method.It indicates that the crustal tectonic stress field is relatively stable in regions in a long time.The principal compressive stress axes of Qinghai-Tibet and Xinjiang subplates in the western part of Chinese mainland direct to NS and NNE-SSW,which are controlled by the force from the col-lision of the Eurasia Plate and India Plate.The principal compressive strain axes of Heilongjiang and North China subplates in the eastern part direct to ENE-WSW,which shows that they are subject to the force from the collision and underthrust of the Eurasia Plate to the North America and Pacific plates.At the same time,they are also af-fected by the lateral force from Qinghai-Tibet and Xinjiang subplates.The principal compressive strain axis of South China plate is WNW-ESE,which reflects that it is affected by the force from the collision of Philippine Sea Plate and Eurasia Plate and it is also subject to the lateral force from Qinghai-Tibet subplate.It is apparent from the comparison between the principal compressive strain axes in the periods of 2004～2007 and 2001～2004 that the acting directions of principal compressive stress of subplates in both periods are basically consistent.However,there is certain difference between their directional concentrations of principal compressive stress axes.The sur-face strain rates of different tectonic units in both periods indicate that the events predominating by compressive variation decrease,while the events predominating by tensile change increase.展开更多
Some crustal-deformation data related to the Ms8.0 Wenchuan in 2008, was described and a model that is capable of explaining the observed deformation features is presented. The data include ： pre-earthquake uplift in...Some crustal-deformation data related to the Ms8.0 Wenchuan in 2008, was described and a model that is capable of explaining the observed deformation features is presented. The data include ： pre-earthquake uplift in an area south of the epicenter obtained by repeated-leveling measurements ; pre-earthquake horizontal deformation by GPS observation during two periods in Sichuan-Yunnan area;vertical deformation along a short cross-fault leveling line in the epicenter area; and co-seismic near-field vertical and horizontal crustal-move- ment data by GPS. The model is basically ＂elastic-rebound＂, but involves a zone between two local faults that was squeezed out at the time of earthquake. ：展开更多
There exists many kinds of calculation models of plane and spherical strain fields, but the results of these models are different. The representative models was analyzed, and got some useful conclusions, in which some...There exists many kinds of calculation models of plane and spherical strain fields, but the results of these models are different. The representative models was analyzed, and got some useful conclusions, in which some models are unbiased, some have deviations that can be corrected, some can only be used to compute strain in a uniform medium and can not be extended, and some can be used in the calculation and analysis of continuous strain field as well. Meanwhile, the correction relationship for spherical difference movement （displacement） computed from strain results was given, and the meaning of the non - differential term in spherical strain model was demonstrated.展开更多
Co- and post-seismic vertical displacements of the Wenchuan earthquake derived from two measurements in 2008 and 2010 along two partly-damaged leveling lines near the epicenter show the following features： Co-seismic...Co- and post-seismic vertical displacements of the Wenchuan earthquake derived from two measurements in 2008 and 2010 along two partly-damaged leveling lines near the epicenter show the following features： Co-seismic displacement at Beichuan-Yingxiu fault was as large as 4. 711 m near Beichuan, where the maximum observed fault offset was 5.1 m. In contrast, the observed co-seismic offset of the Qingchuan fault in Pingwu County was only 0. 064 m. During 2008 - 2010, the post-seismic displacement rate was 5 - 27 mm/a near Beichuan-Yingxiu fault in Beichuan area, 20.6 mrn/a at Jiangyou-Guangyuan fault near Dakang, and only 0.2 - 1.3 mm/a at Qingehuan fault near Gucheng.展开更多
In comparison with the ITRF2000 model, the ITRF2005 model represents a significant improvement in solution generation, datum definition and realization. However, these improvements cause a frame difference between the...In comparison with the ITRF2000 model, the ITRF2005 model represents a significant improvement in solution generation, datum definition and realization. However, these improvements cause a frame difference between the ITRF2000 and ITRF2005 models, which may impact GNSS data processing. To quantify this im- pact, the differences of the GNSS results obtained using the two models, including station coordinates, base- line length and horizontal velocity field, were analyzed. After transformation, the differences in position were at the millimeter level, and the differences in baseline length were less than 1 ram. The differences in the hori- zontal velocity fields decreased with as the study area was reduced. For a large region, the differences in these value were less than 1 mm/a, with a systematic difference of approximately 2 degrees in direction, while for a medium-sized region, the differences in value and direction were not significant.展开更多
The strain rate in Sichuan and its surrounding areas, and the activity rate and strain rate in two block boundary fault zones were calculated according to the block movement parameters estimated using the station spee...The strain rate in Sichuan and its surrounding areas, and the activity rate and strain rate in two block boundary fault zones were calculated according to the block movement parameters estimated using the station speed obtained from regional GPS station observation data in these areas for 2009e2011 and GPS continuous station data for 2011e2013. The movement field characteristics in these areas were analyzed with the Sichuan Basin as the reference. Results show that the principal strain rate and maximum shear strain rate of the Bayan Har block were the largest, followed by those of the Sichuane Yunnan block and Sichuan Basin. The deep normal strain rate in the Longmenshan fault zone was compressive and large over the study period. The normal strain rate in the Xianshuihe fault zone was tensile.展开更多
The Ms7. 0 Lushan earthquake is directly related to the activity of Longmenshan fault zone. In this article, deformation monitoring data in Longmenshan and its surrounding areas were analyzed and the result shows that...The Ms7. 0 Lushan earthquake is directly related to the activity of Longmenshan fault zone. In this article, deformation monitoring data in Longmenshan and its surrounding areas were analyzed and the result shows that the activity trend of Longmenshan fault zone depends on the relative motion between Bayan Hat Block and Sichuan Basin, and the main power of the movement comes from the Tibetan Plateau and the upper Yangtze craton massif of push. In recent years, the Longmenshan and its surrounding areas is one of the main seismogenic area in China's Mainland. In this paper, combination with seismogenic area of geological structure and crustal deformation observation data analysis resuhs, the relationship between the earthquake and Longmenshan fault zone activity was discussed, and the key monitoring areas in the next five years were proposed.展开更多
Using a time series method that combines both the persistent scatterer and small baseline approaches, we analyzed 9 scenes Envisat ASAR data over the L＇Aquila earthquake, and obtained a Shocke＇s displacement field a...Using a time series method that combines both the persistent scatterer and small baseline approaches, we analyzed 9 scenes Envisat ASAR data over the L＇Aquila earthquake, and obtained a Shocke＇s displacement field and its evolution processes. The results show that： （1） Envisat ASAR clearly detected the whole processes of displacement field of the L＇Aquila earthquake, and distinct variations at different stages of the displacement field. （2） Preseismic creep displacement → displacement mutation when faulting → constantly slowed down after the earthquake. （3） The area of the strongest deformation and ground rupture was a low-lying oval depression region to the southeast. Surface faulting within a zone of about 22 km× 14 km, with an orientation of 135°, occurred along the NW-striking and SW-dipping Paganica-S. Demetrio normal fault. （4） In analyzing an area of about 54 km x 59 km, bounded by north-south axis to the epicenter, the displacement field has significant characteristics of a watershed： westward of the epicenter shows uplift with maximum of 130 mm in line-of-sight （LOS）, and east of the epicenter was a region with 220 mm of maximum subsidence in the LOS, concentrating on the rupture zone, the majority of which formed in the course of faulting and subsequence.展开更多
In this paper, we analyze the time series of site coordinates of 27 continuously monitoring GPS sites covered by the Crustal Movement Observation Network of China over the whole country. The data are obtained in the p...In this paper, we analyze the time series of site coordinates of 27 continuously monitoring GPS sites covered by the Crustal Movement Observation Network of China over the whole country. The data are obtained in the period from the beginning of the observation to the November of 2005. On the basis of data processing, we analyze the power spectrum density of coordinate component noise at each site and calculate the spectral indexes manifesting the noise property of each component. The spectral indexes indicate that for most sites, the noise of time series of each coordinate component can be addressed by the model of white noise ＋ flicker noise; and for a small amount of sites, it can be described by the model of white noise ＋ flicker noise ＋ random walk noise. We also quantitatively estimate each noise component in the model by using the criterion of maximum likelihood estimation. The result shows that the white noise in the time series of GPS site coordinates does not constitute the main part of noise. Therefore, the error estimation of site movement parameters is usually too small, or too optimistic if we consider the white noise only. Correspondingly, if this factor is not fully considered in explaining these movement parameters, it might mislead the readers.展开更多
Vertical deformation in Tianjin area during 1992 -2008 was calculated from leveling data. The effect of large surface subsidence caused by extensive groundwater pumping was removed by fitting the data along each surve...Vertical deformation in Tianjin area during 1992 -2008 was calculated from leveling data. The effect of large surface subsidence caused by extensive groundwater pumping was removed by fitting the data along each survey line with a polynomial function. The results are fitted with crustal blocks individually in this area. Vertical deformation rates are mapped, vertical rates of the main fault zones were calculated, and the activities of the blocks and fault zones were investigated. The observed vertical deformation shows that some of the blocks tilted and some blocks rose or subsided as a whole. The vertical rates at fault zones in the area vary within the range of 0. 13-0. 48 mm/a,with an average value of 0.29 mm/a.展开更多
The global plate motion rates Ω are not uniform in time and space. The rotation rates were larger than 0. 545°/Ma for Cocos, Philippine Sea, Pacific, Nazca, Australia, India and Arabia plates, but smaller than 0...The global plate motion rates Ω are not uniform in time and space. The rotation rates were larger than 0. 545°/Ma for Cocos, Philippine Sea, Pacific, Nazca, Australia, India and Arabia plates, but smaller than 0. 315°/Ma. for other plates. Compared to 1997. 0, the Ω values of the three oceanic plates in 2000. 0 increased by,respectively,2.4% ,2. 1% and 41.7%, and the northward movement rates of the the India plate and western part of the Australia plate increased by 3.38 mm/a on the average. The spatial distribution of earthquakes was dependent on earthquake magnitude. Earthquakes of 5.0 ≤ Mw 〈 7.0 were located mainly in plate-margin zones and intra-plate crustal deformation zones joining the southern margin of Eurasia plate. Earthquakes of Mw≥7.0 concentrated basically in the circum-Pacific and South Asia zones, but hardly in midocean-ridge seismic zones. Earthquakes of Mw ≥ 8.0 were located only in the margin zones of the India, Aus- tralia,Pacific and Nazca plates orthogonal to the direction of plate motion. Compared with previous eighteen years, global earthquake activity enhanced obviously after 1994, especially after 2001. The Ω value of a plate was closely related to the activity of strong earthquakes. The largest earthquakes were located in the front-margin zones of plates having the largest Ω values. Energy released by strong earthquakes comes mainly from kinetic energy of the plates. Global seismicity enhancement was caused mainly by the acceleration of the three oceanic plates. Larger enhancement of global earthquake activity lagged behind the movement acceleration of the three oceanic plates by four years.展开更多
The Zhangjiakou-Bohai Sea fault zone located in the northern part of the North China region is a seismotectonic zone controlling the present-day strong earthquake activities. Under the effect of regional principal com...The Zhangjiakou-Bohai Sea fault zone located in the northern part of the North China region is a seismotectonic zone controlling the present-day strong earthquake activities. Under the effect of regional principal compressive stress with the direction of NEE-SWW, a series of NE-trending active tectonic zones have developed, which form a group of conjugated shear fracturing systems and control the occurrence of the present-day strong earthquakes. The feature of crustal deformation around this fault zone is studied in the paper. The long-term crustal deformation pattern from GPS measurements exhibits a relatively complete left-lateral strike-slip movement along the active fault zone. However, studies on crustal deformation by stages indicate that a series of NE-trending large-scale anomalous gradient zones have appeared along the Zhangjiakou-Bohai Sea fault zone before moderately strong earthquakes. They are represented respectively by the activities of the Tangshan-Hejian, the Sanhe-Laishui and the Yanhuai-Shanxi seismotectonic zones. This may indicate the occurrence of med-term precursors to moderately strong earthquakes along Zhangjiakou-Bohai Sea zone. The results in the paper show that the crustal deformation pattern before strong earthquake reveals the information of strain status in the deep seismogenic zone, while the chaotic pattern after the occurrence of strong earthquake represents the adjustment of the covering strata.展开更多
Based on the repeated gravity observation data from 1996 to 2007 from the Longmenshan gravity network, which has been dealt with by adjustment processing, the benchmark interference removal and impact of elevation cha...Based on the repeated gravity observation data from 1996 to 2007 from the Longmenshan gravity network, which has been dealt with by adjustment processing, the benchmark interference removal and impact of elevation changes removal, and by using the 3-D inversion method to reflect underground density, we analyze the characteristics of Longmenshan regional dynamic crustal density at depths of 25km, 20km and 15kin. The results show that in the Wenchuan earthquake preparation process, the regional density field showed marked characteristics both in time and space distribution. From the point of time process, the density change trend in the ten years before the earthquake presents a periodic change pattern： steady phase, dramatic stage, slow reducing phase and slow increase phase. The degree of density changes is from large to small, which means that earthquake gestation has reached the final stage. From the point of space distribution, density change distribution has a tendency of ＂dispersion--relative concentration＂, this shows that before the earthquake, the entropy of the underground density field was decreased. In addition, dramatic density changes often occur in the Longmenshan fault zone and western Sichuan plateau. Also, with the increase of depth, the trend of density change is more and more obvious. Through comparative analysis, the influence of density change on gravity is much bigger than that from height change.展开更多
In order to obtain deformation parameters in the south segment of Longmenshan fault zone,Euler datum transformation and the least square collocation for data interpolation and smoothing are used to process GPS displac...In order to obtain deformation parameters in the south segment of Longmenshan fault zone,Euler datum transformation and the least square collocation for data interpolation and smoothing are used to process GPS displacement time series data in the south segment of Longmenshan fault zone,and the rigid and elastic-plastic block motion model is used to calculate the strain parameters in each subarea. Conjoint analysis of displacement,velocity of each station and strain parameters of each subarea reveals that the influence of the Wenchuan earthquake on the south segment of Longmenshan fault zone increases from southeast to northwest,causing a highest deformation rate 6 times the background value and heightening the influence of the hidden faults on the difference of the earth surface along its two sides,which leads to the seismic risk of the southern segment increasing from north to south. The comparison of seismic risk among subareas based on the tectonic and seismicity background indicates that the most dangerous area is on the southeast of Longmenshan faults,and the background strain accumulation and the promoting effect of the Wenchuan earthquake advanced the occurrence of Lushan earthquake and the sinistral strike-slip on the rupture plane. The Wenchuan earthquake also caused a slight two-year long continuous strain release in the south segment of Xianshuihe fault,but the influence is far less than the effect of the compressive strain caused by the Sichuan-Yunnan block.展开更多
Fault deformation characteristics in the northern margin of the Tibetan Plateau before the Menyuan Ms6.4 earthquake are investigated through time-series and structural geological analysis based on cross-fault observat...Fault deformation characteristics in the northern margin of the Tibetan Plateau before the Menyuan Ms6.4 earthquake are investigated through time-series and structural geological analysis based on cross-fault observation data from the Qilian Mountain-Haiyuan Fault belt and the West Qinling Fault belt. The results indicate： 1） Group short-term abnormal variations appeared in the Qilian Mountain-Haiyuan Fault belt and the West Qinling Fault belt before the Menyuan Ms6.4 earthquake. 2） More medium and short-term anomalies appear in the middle-eastern segment of the Qilian Mountain Fault belt and the West Qinling Fault belt, suggesting that the faults＇ activities are strong in these areas. The faults＇ activities in the middle-eastern segment of the Qilian Fault belt result from extensional stress, as before the earthquake, whereas those in the West Qinling Fault belt are mainly compressional. 3） In recent years, moderate-strong earthquakes occurred in both the Kunlun Mountain and the Qilian Mountain Fault belts, and some energy was released. It is possible that the seismicity moved eastward under this regime. Therefore, we should pay attention to the West Qinling Mountain area where an Ms6-7 earthquake could occur in future.展开更多
基金supported by Basic Research Projects of Tianjin(08JCZDJC18900)National Seismic Hazard Maps Program Planning of China+1 种基金China Earthquake AdministrationNational Science and Technology Supporting Plan of the Eleventh Five-Year(2006BAC01B02-02-03)
文摘Crustal movement and incremental-movement data observed repeatedly at GPS stations during 1999 -2009 were analyzed to study the effect of two earthquakes of Ms8.1 and Ms8.0 that occurred in 2001 and 2008, respectively, in Qinghai-Tibet sub-plate and its eastern margin. The result revealed certain anoma- lous pre-earthquake deformation and some large co-seismic changes. Prior to the 2008 Wcnchuan Ms8.0 earthquake, the seismogenic Kunlunshan fault zone became a geographic boundary between different regional movements. At the time of the earthquake, there was an average cross-fault crustal shortening of - 1.04 m and an average right-lateral strike slip of 0.76 m along the ruptured segment, as well as a strain-energy release of -62.66 ×10.7.
基金sponsored by the National Science and Technology Support Program (2012BAK19B01)the National Natural Science Fund (41274008)
文摘Using Global Positioning System(GPS) data to analyze the earthquake preparation characteristics of the Kunlun Ms8.1 and the Wenchuan Ms8.0 earthquakes, we review the main research developments of earthquake forecasting and the mechanisms of earthquake preparation using crustal deformation data from recent periods, and discuss the similarities and differences in the scientific approaches adopted by the Chinese and foreign scholars. We then analyze the deformation characteristics of earthquake preparation, with respect to slip and dip-slip faults. Our results show that, in order to understand the relationship between crustal deformation and earthquake preparation, research focus should be expanded from fault-scale to larger scale regions. Furthermore, the dynamic deformation characteristics associated with earthquake preparation must be considered as a multiscale, spatial-temporal process, in order to obtain the necessary criteria for strong earthquake forecasts.
基金This project is sponsored by the National Support of Science and Technology Research"Study on Techniques for Monitoring and Predicting of Strong Earthquake"and the Joint Earthquake Science Foundation of CEA(A07066),China
文摘In order to track the space-time variation of regional strain field holistically(in a large scale) and to describe the regional movement field more objectively,the paper uses a nonlinear continuous strain model focused on extracting medium-low frequency strain information on the basis of a region with no rotation.According to the repeated measurements(1999～2001～2004) from GPS monitoring stations in the Sichuan and Yunnan area obtained by the Project of "China Crust Movement Measuring Network",and with the movement of 1999～2001(stage deformation background) as the basic reference,we separated the main influencing factors of the Kunlun Mountain M-S8.1 earthquake in 2001 from the data of 2001 and 2004,and the results indicate:(1) the Kunlun Mountain M-S8.1 earthquake has a discriminating effect on the Sichuan and Yunnan area,moreover,the deformation mode and background had not only certain similitude but also some diversity;(2) The movement field before the earthquake was very ordinal,while after the earthquake,order and disorder existed simultaneously in the displacement field;The displacement quantities of GPS monitoring stations were generally several millimeters;(3) The principal strain field before earthquake was basically tensile in an approximate EW direction and compressive in the SN direction,and tension was predominant.After the earthquake,the principal strain field in the Sichuan area was compressive in the EW direction and tensile in the SN direction,and the compression was predominant.In the Yunnan area,it was tensional in the NE direction and compressive in the NW direction,and tension was predominant;(4) The surficial strain before the earthquake was dominated by superficial expansion,the contractive area being located basically in the east boundary of Sichuan and Yunnan block and its neighborhood.After the earthquake,the Sichuan area was surface contractive(the further north,the greater it was),and south of it was an area of superficial expansion.Generally speaking,the Kunlun Mountain M-S8.1 earthquake played an active role in the accumulation of energy in the Sichuan and Yunnan area.Special attention shall be focused on the segment of Xichang-Dongchuan and its neighborhood.
基金the National Natural Science Foundation of China(40472109)"973"State Key Basic Research Project of China(2004CB418410)Joint Eanthquake Science Foundation of China(105066)
文摘The Daliangshan tectonic zone is a rhombic area to the east of the Anninghe and Zemuhe fault zones in the middle segment of the Xianshuihe-Xiaojiang fault system along the southeast margin of the Qinghai-Xizang （Tibet） Plateau. Since the Cenozoic era, the neotectonic deformation in the Daliangshan tectonic zone has presented not only sinistral slip and reverse faulting along the Daliangshan fault zone, but also proximate SN-trending crust shortening. It is estimated that the average crust shortening in the Daliangshan tectonic zone is 10.9 ± 1.6 km, with a shortening rate of 17.8 ± 2.2% using the method of balanced cross-sections. The crust shortening from folding occurred mainly in the Miocene and the Pliocene periods, lasting no more than 8.6 Ma. Based on this, a crust shortening velocity of 1.3 ± 0.2 mm/a can be estimated. Compared with the left offset along the Daliangshan fault zone, it is recognized that crust shortening by folding plays an important part in transferring crustal deformation southeastward along the Xianshulhe-Xiaojiang fault system.
基金funded by the Science and Technology Support Program(2012BAK19B01)Natural Science Foundation of China(41104057,41104058)the special project of basic scientific research of Institute of Earthquake Science,China Earthquake Administration(2012IES0405,2012IES0406)
文摘Based on GPS data from 1991- 2004 and the least-squares collocation method,we analyze the crustal deformation in the Chinese mainland. The results show that the first-order crustal deformation is unchanged in different periods in the Chinese mainland,which reflects the background of regional tectonic activity. The strain rate is much higher in Western China,especially in the Qinghai-Tibetan Plateau and Sichuan-Yunnan area. The variations in different periods are related with seismicity of strong earthquakes during the same time. The GPS data after 2004 shows the post-seismic deformation of the 2001 Kunlun Mountains M S8. 1 earthquake.
基金Project of State Science and Technology in the Eleventh "Five-year Plan" (2006BAC01B02-02-03).
文摘On the basis of the GPS data obtained from repeated measurements carried out in 2004 and 2007,the horizontal principal strain of the Chinese mainland is calculated,which shows that the direction of principal compressive strain axis of each subplate is basically consistent with the P-axis of focal mechanism solution and the principal compressive stress axis acquired by geological method.It indicates that the crustal tectonic stress field is relatively stable in regions in a long time.The principal compressive stress axes of Qinghai-Tibet and Xinjiang subplates in the western part of Chinese mainland direct to NS and NNE-SSW,which are controlled by the force from the col-lision of the Eurasia Plate and India Plate.The principal compressive strain axes of Heilongjiang and North China subplates in the eastern part direct to ENE-WSW,which shows that they are subject to the force from the collision and underthrust of the Eurasia Plate to the North America and Pacific plates.At the same time,they are also af-fected by the lateral force from Qinghai-Tibet and Xinjiang subplates.The principal compressive strain axis of South China plate is WNW-ESE,which reflects that it is affected by the force from the collision of Philippine Sea Plate and Eurasia Plate and it is also subject to the lateral force from Qinghai-Tibet subplate.It is apparent from the comparison between the principal compressive strain axes in the periods of 2004～2007 and 2001～2004 that the acting directions of principal compressive stress of subplates in both periods are basically consistent.However,there is certain difference between their directional concentrations of principal compressive stress axes.The sur-face strain rates of different tectonic units in both periods indicate that the events predominating by compressive variation decrease,while the events predominating by tensile change increase.
基金supported by the north-east margin area of Qinghai-Tibetplateau,from the research project of integrated observation of geophysicsfields for China(200908029-5)Tianjin research project on basic appli-cation and front technology(08JCZDJC18900)
文摘Some crustal-deformation data related to the Ms8.0 Wenchuan in 2008, was described and a model that is capable of explaining the observed deformation features is presented. The data include ： pre-earthquake uplift in an area south of the epicenter obtained by repeated-leveling measurements ; pre-earthquake horizontal deformation by GPS observation during two periods in Sichuan-Yunnan area;vertical deformation along a short cross-fault leveling line in the epicenter area; and co-seismic near-field vertical and horizontal crustal-move- ment data by GPS. The model is basically ＂elastic-rebound＂, but involves a zone between two local faults that was squeezed out at the time of earthquake. ：
基金supported by the Natural Eleventh Five Years Scientific and Technolosical Plan( 2006BACOLB03-01-01)
文摘There exists many kinds of calculation models of plane and spherical strain fields, but the results of these models are different. The representative models was analyzed, and got some useful conclusions, in which some models are unbiased, some have deviations that can be corrected, some can only be used to compute strain in a uniform medium and can not be extended, and some can be used in the calculation and analysis of continuous strain field as well. Meanwhile, the correction relationship for spherical difference movement （displacement） computed from strain results was given, and the meaning of the non - differential term in spherical strain model was demonstrated.
基金supported by the Special Earthquake Research ProjectGrant from China Earthquake Administration( 200908029)
文摘Co- and post-seismic vertical displacements of the Wenchuan earthquake derived from two measurements in 2008 and 2010 along two partly-damaged leveling lines near the epicenter show the following features： Co-seismic displacement at Beichuan-Yingxiu fault was as large as 4. 711 m near Beichuan, where the maximum observed fault offset was 5.1 m. In contrast, the observed co-seismic offset of the Qingchuan fault in Pingwu County was only 0. 064 m. During 2008 - 2010, the post-seismic displacement rate was 5 - 27 mm/a near Beichuan-Yingxiu fault in Beichuan area, 20.6 mrn/a at Jiangyou-Guangyuan fault near Dakang, and only 0.2 - 1.3 mm/a at Qingehuan fault near Gucheng.
基金supported by the Special Earthquake Research Project Granted by the China Earthquake Administration(201308009)
文摘In comparison with the ITRF2000 model, the ITRF2005 model represents a significant improvement in solution generation, datum definition and realization. However, these improvements cause a frame difference between the ITRF2000 and ITRF2005 models, which may impact GNSS data processing. To quantify this im- pact, the differences of the GNSS results obtained using the two models, including station coordinates, base- line length and horizontal velocity field, were analyzed. After transformation, the differences in position were at the millimeter level, and the differences in baseline length were less than 1 ram. The differences in the hori- zontal velocity fields decreased with as the study area was reduced. For a large region, the differences in these value were less than 1 mm/a, with a systematic difference of approximately 2 degrees in direction, while for a medium-sized region, the differences in value and direction were not significant.
基金supported financially by Project under Science for Earthquake Resilience, China Earthquake Administration (XH13037Y)
文摘The strain rate in Sichuan and its surrounding areas, and the activity rate and strain rate in two block boundary fault zones were calculated according to the block movement parameters estimated using the station speed obtained from regional GPS station observation data in these areas for 2009e2011 and GPS continuous station data for 2011e2013. The movement field characteristics in these areas were analyzed with the Sichuan Basin as the reference. Results show that the principal strain rate and maximum shear strain rate of the Bayan Har block were the largest, followed by those of the Sichuane Yunnan block and Sichuan Basin. The deep normal strain rate in the Longmenshan fault zone was compressive and large over the study period. The normal strain rate in the Xianshuihe fault zone was tensile.
基金supported by the Special Fund for Earthquake Research in the Public Interest(201208009201308009)
文摘The Ms7. 0 Lushan earthquake is directly related to the activity of Longmenshan fault zone. In this article, deformation monitoring data in Longmenshan and its surrounding areas were analyzed and the result shows that the activity trend of Longmenshan fault zone depends on the relative motion between Bayan Hat Block and Sichuan Basin, and the main power of the movement comes from the Tibetan Plateau and the upper Yangtze craton massif of push. In recent years, the Longmenshan and its surrounding areas is one of the main seismogenic area in China's Mainland. In this paper, combination with seismogenic area of geological structure and crustal deformation observation data analysis resuhs, the relationship between the earthquake and Longmenshan fault zone activity was discussed, and the key monitoring areas in the next five years were proposed.
基金supported by Director Foundation of the Institute of Seismology,China Earthquake Administration(IS201266111)the Seism Science &Technology Spark Program of China Earthquake Administration(XH13036)Earthquake Industry Research Special Project(201308009)
文摘Using a time series method that combines both the persistent scatterer and small baseline approaches, we analyzed 9 scenes Envisat ASAR data over the L＇Aquila earthquake, and obtained a Shocke＇s displacement field and its evolution processes. The results show that： （1） Envisat ASAR clearly detected the whole processes of displacement field of the L＇Aquila earthquake, and distinct variations at different stages of the displacement field. （2） Preseismic creep displacement → displacement mutation when faulting → constantly slowed down after the earthquake. （3） The area of the strongest deformation and ground rupture was a low-lying oval depression region to the southeast. Surface faulting within a zone of about 22 km× 14 km, with an orientation of 135°, occurred along the NW-striking and SW-dipping Paganica-S. Demetrio normal fault. （4） In analyzing an area of about 54 km x 59 km, bounded by north-south axis to the epicenter, the displacement field has significant characteristics of a watershed： westward of the epicenter shows uplift with maximum of 130 mm in line-of-sight （LOS）, and east of the epicenter was a region with 220 mm of maximum subsidence in the LOS, concentrating on the rupture zone, the majority of which formed in the course of faulting and subsequence.
基金Special project of China Earthquake Administration"Study on the Integrated Observation of Vertical Crustal Move-ment and Deformation of South-North Seismic Zone on the Chinese Mainland".
文摘In this paper, we analyze the time series of site coordinates of 27 continuously monitoring GPS sites covered by the Crustal Movement Observation Network of China over the whole country. The data are obtained in the period from the beginning of the observation to the November of 2005. On the basis of data processing, we analyze the power spectrum density of coordinate component noise at each site and calculate the spectral indexes manifesting the noise property of each component. The spectral indexes indicate that for most sites, the noise of time series of each coordinate component can be addressed by the model of white noise ＋ flicker noise; and for a small amount of sites, it can be described by the model of white noise ＋ flicker noise ＋ random walk noise. We also quantitatively estimate each noise component in the model by using the criterion of maximum likelihood estimation. The result shows that the white noise in the time series of GPS site coordinates does not constitute the main part of noise. Therefore, the error estimation of site movement parameters is usually too small, or too optimistic if we consider the white noise only. Correspondingly, if this factor is not fully considered in explaining these movement parameters, it might mislead the readers.
文摘Vertical deformation in Tianjin area during 1992 -2008 was calculated from leveling data. The effect of large surface subsidence caused by extensive groundwater pumping was removed by fitting the data along each survey line with a polynomial function. The results are fitted with crustal blocks individually in this area. Vertical deformation rates are mapped, vertical rates of the main fault zones were calculated, and the activities of the blocks and fault zones were investigated. The observed vertical deformation shows that some of the blocks tilted and some blocks rose or subsided as a whole. The vertical rates at fault zones in the area vary within the range of 0. 13-0. 48 mm/a,with an average value of 0.29 mm/a.
基金supported by the China National Key Basic Research Program (2007CB411702)the National Natural Science Fundation of China(40474036,40474039)
文摘The global plate motion rates Ω are not uniform in time and space. The rotation rates were larger than 0. 545°/Ma for Cocos, Philippine Sea, Pacific, Nazca, Australia, India and Arabia plates, but smaller than 0. 315°/Ma. for other plates. Compared to 1997. 0, the Ω values of the three oceanic plates in 2000. 0 increased by,respectively,2.4% ,2. 1% and 41.7%, and the northward movement rates of the the India plate and western part of the Australia plate increased by 3.38 mm/a on the average. The spatial distribution of earthquakes was dependent on earthquake magnitude. Earthquakes of 5.0 ≤ Mw 〈 7.0 were located mainly in plate-margin zones and intra-plate crustal deformation zones joining the southern margin of Eurasia plate. Earthquakes of Mw≥7.0 concentrated basically in the circum-Pacific and South Asia zones, but hardly in midocean-ridge seismic zones. Earthquakes of Mw ≥ 8.0 were located only in the margin zones of the India, Aus- tralia,Pacific and Nazca plates orthogonal to the direction of plate motion. Compared with previous eighteen years, global earthquake activity enhanced obviously after 1994, especially after 2001. The Ω value of a plate was closely related to the activity of strong earthquakes. The largest earthquakes were located in the front-margin zones of plates having the largest Ω values. Energy released by strong earthquakes comes mainly from kinetic energy of the plates. Global seismicity enhancement was caused mainly by the acceleration of the three oceanic plates. Larger enhancement of global earthquake activity lagged behind the movement acceleration of the three oceanic plates by four years.
文摘The Zhangjiakou-Bohai Sea fault zone located in the northern part of the North China region is a seismotectonic zone controlling the present-day strong earthquake activities. Under the effect of regional principal compressive stress with the direction of NEE-SWW, a series of NE-trending active tectonic zones have developed, which form a group of conjugated shear fracturing systems and control the occurrence of the present-day strong earthquakes. The feature of crustal deformation around this fault zone is studied in the paper. The long-term crustal deformation pattern from GPS measurements exhibits a relatively complete left-lateral strike-slip movement along the active fault zone. However, studies on crustal deformation by stages indicate that a series of NE-trending large-scale anomalous gradient zones have appeared along the Zhangjiakou-Bohai Sea fault zone before moderately strong earthquakes. They are represented respectively by the activities of the Tangshan-Hejian, the Sanhe-Laishui and the Yanhuai-Shanxi seismotectonic zones. This may indicate the occurrence of med-term precursors to moderately strong earthquakes along Zhangjiakou-Bohai Sea zone. The results in the paper show that the crustal deformation pattern before strong earthquake reveals the information of strain status in the deep seismogenic zone, while the chaotic pattern after the occurrence of strong earthquake represents the adjustment of the covering strata.
基金funded by the National Natural Science Foundation of China(41330314)Projects of Science for Earthquake Resilience(XH15049Y)+1 种基金National Science and Technology Support Program of China(2012BAK19B02,2012BAK19B03)Special Research Foundation for Seismology(201108009)
文摘Based on the repeated gravity observation data from 1996 to 2007 from the Longmenshan gravity network, which has been dealt with by adjustment processing, the benchmark interference removal and impact of elevation changes removal, and by using the 3-D inversion method to reflect underground density, we analyze the characteristics of Longmenshan regional dynamic crustal density at depths of 25km, 20km and 15kin. The results show that in the Wenchuan earthquake preparation process, the regional density field showed marked characteristics both in time and space distribution. From the point of time process, the density change trend in the ten years before the earthquake presents a periodic change pattern： steady phase, dramatic stage, slow reducing phase and slow increase phase. The degree of density changes is from large to small, which means that earthquake gestation has reached the final stage. From the point of space distribution, density change distribution has a tendency of ＂dispersion--relative concentration＂, this shows that before the earthquake, the entropy of the underground density field was decreased. In addition, dramatic density changes often occur in the Longmenshan fault zone and western Sichuan plateau. Also, with the increase of depth, the trend of density change is more and more obvious. Through comparative analysis, the influence of density change on gravity is much bigger than that from height change.
基金sponsored by the Director Fund of Institute of Seismology,China Earthquake Administration(IS201526240)Data Sharing Special Project of the Ministry of Science and Technology,the People's Republic of China(IS20135065)
文摘In order to obtain deformation parameters in the south segment of Longmenshan fault zone,Euler datum transformation and the least square collocation for data interpolation and smoothing are used to process GPS displacement time series data in the south segment of Longmenshan fault zone,and the rigid and elastic-plastic block motion model is used to calculate the strain parameters in each subarea. Conjoint analysis of displacement,velocity of each station and strain parameters of each subarea reveals that the influence of the Wenchuan earthquake on the south segment of Longmenshan fault zone increases from southeast to northwest,causing a highest deformation rate 6 times the background value and heightening the influence of the hidden faults on the difference of the earth surface along its two sides,which leads to the seismic risk of the southern segment increasing from north to south. The comparison of seismic risk among subareas based on the tectonic and seismicity background indicates that the most dangerous area is on the southeast of Longmenshan faults,and the background strain accumulation and the promoting effect of the Wenchuan earthquake advanced the occurrence of Lushan earthquake and the sinistral strike-slip on the rupture plane. The Wenchuan earthquake also caused a slight two-year long continuous strain release in the south segment of Xianshuihe fault,but the influence is far less than the effect of the compressive strain caused by the Sichuan-Yunnan block.
基金funded by the Special Project of Basic Work of Science and Technology“Compilation and dataprocessing of modern vertical deformation Atlas of Chinese mainland”(2015FY210400)the Science and Technology Innovation Fund(FMC2015013)of the First Crust Monitoring and Application Center,China Earthquake Administration
文摘Fault deformation characteristics in the northern margin of the Tibetan Plateau before the Menyuan Ms6.4 earthquake are investigated through time-series and structural geological analysis based on cross-fault observation data from the Qilian Mountain-Haiyuan Fault belt and the West Qinling Fault belt. The results indicate： 1） Group short-term abnormal variations appeared in the Qilian Mountain-Haiyuan Fault belt and the West Qinling Fault belt before the Menyuan Ms6.4 earthquake. 2） More medium and short-term anomalies appear in the middle-eastern segment of the Qilian Mountain Fault belt and the West Qinling Fault belt, suggesting that the faults＇ activities are strong in these areas. The faults＇ activities in the middle-eastern segment of the Qilian Fault belt result from extensional stress, as before the earthquake, whereas those in the West Qinling Fault belt are mainly compressional. 3） In recent years, moderate-strong earthquakes occurred in both the Kunlun Mountain and the Qilian Mountain Fault belts, and some energy was released. It is possible that the seismicity moved eastward under this regime. Therefore, we should pay attention to the West Qinling Mountain area where an Ms6-7 earthquake could occur in future.
