This study investigates the thermo–mechanical behavior of C40 concrete and reinforced concrete subjected to elevated temperatures up to 700℃by integrating experimental testing and advanced numerical modeling.A tempe...This study investigates the thermo–mechanical behavior of C40 concrete and reinforced concrete subjected to elevated temperatures up to 700℃by integrating experimental testing and advanced numerical modeling.A temperature-indexed Concrete Damage Plasticity(CDP)framework incorporating bond–slip effects was developed in Abaqus to capture both global stress–strain responses and localized damage evolution.Uniaxial compression tests on thermally exposed cylinders provided residual strength data and failure observations for model calibration and validation.Results demonstrated a distinct two-stage degradation regime:moderate stiffness and strength reduction up to~400℃,followed by sharp deterioration beyond 500℃–600℃,with residual capacity at 700℃reduced to~20%–25%of the ambient value.Strain–damage analyses revealed the formation of a peripheral tensile strain band,which thickened and propagated inward with increasing temperature,governing crack initiation and cover spalling.Supplemental analyses highlighted that transverse reinforcement improved ductility and damage distribution at moderate temperatures(~300℃),but bond deterioration and steel softening beyond~600℃substantially diminished confinement effectiveness.The proposed CDP model accurately reproduced experimental stress–strain curves(R^(2)≈0.94–0.98 up to 600℃;≈0.90 at 700℃),with peak stress errors within 7%–10%and energy absorption captured within~12%.These findings confirm the robustness of the temperature-indexed CDP framework for simulating fire-damaged reinforced concrete and provide practical guidelines for post-fire assessment,spalling detection,and fire-resilient design of structural members.展开更多
Climate change is impacting forests in Central Europe,causing increased mortality and degradation of forest ecosystem services(FES).As global warming intensifies,these effects are likely to worsen,particularly through...Climate change is impacting forests in Central Europe,causing increased mortality and degradation of forest ecosystem services(FES).As global warming intensifies,these effects are likely to worsen,particularly through more severe droughts and increased biotic disturbances.Understanding how forests respond to different levels of warming is essential for adaptation planning.Therefore,this study analyzed changes in forest structure and FES,including timber production,climate change mitigation,recreation,and structural diversity,under three global warming scenarios.Using the LandClim model,we compared warming levels of 1.5,2,and 3℃above preindustrial temperatures,based on 30-year periods from RCP data,to historical climate.Our research focused on Freiburg's forests in southwestern Germany,characterized by diverse tree species and an elevation range of 200–1,250 m a.s.l.A warming of 1.5℃could temporarily increase productivity,but at 2℃,biomass losses of up to 10%would occur below elevations of 450 m due to drought mortality.Under 3℃,losses would intensify below 650 m up to 40%,with even drought-resistant species like pedunculate oak experiencing mortality.At higher elevations,bark beetle outbreaks caused mortality of Norway spruce,while European beech capitalized on the changing ecological conditions.Higher warming levels significantly deteriorated FES,particularly timber production,climate change mitigation,and structural diversity,while recreation was less affected.These findings emphasize the urgency of meeting Paris Agreement targets,as limiting warming below 2℃can reduce severe impacts.If warming exceeds this critical threshold,even species presently considered drought-resistant,such as native sessile and pedunculate oaks and non-native red oak,could face serious threats at lower elevations.This would undermine the effectiveness of current management strategies,as these tree species are key to providing multiple FES.展开更多
The expression of traditional Chinese literati is based on connection, seeking emotion and harmony. With various forms, though, this style of expression shares the same value in some art forms, like traditional Chines...The expression of traditional Chinese literati is based on connection, seeking emotion and harmony. With various forms, though, this style of expression shares the same value in some art forms, like traditional Chinese poetry, calligraphy and paintings, and Chinese architecture. Based on the commonalities of various forms of literature and art, this paper offered an insight into Chinese architecture in light of poetic and pictorial expression of traditional Chinese literati. In order to illuminate the corresponding connection between traditional Chinese poetry, calligraphy and paintings, and Chinese architecture, this paper discussed the expression of Chinese architecture corresponding to the essence of traditional Chinese poetry, calligraphy and paintings respectively from the perspective of philosophy, aesthetics, and culture study of Chinese architecture. Via analogous analysis, which includes the analogy between the emotion of architecture and the feelings in traditional poetry, the analogy between the order of architecture and the spirit of calligraphy, and the analogy between the artistic conception and the picturesque scene, the poetic and pictorial expression of Chinese architecture was clarified. This paper emphasized that Chinese architecture needs to jump out of the concrete image, eradicate the interdisciplinary boundaries, and stress the integration of arts and humanities in a higher level, to express Chinese architecture in a Chinese way. That means making Chinese architecture modern in forms and techniques, and traditional in spirit and artistic conception.展开更多
The new production models that aim at both the improvement of the various new processes and the existing ones,create new markets with innovative business methods and introduce sufficient technological solutions for th...The new production models that aim at both the improvement of the various new processes and the existing ones,create new markets with innovative business methods and introduce sufficient technological solutions for the conversion and enhancement of electricity in construction.The objectives are of innovative glass technologies in the new building process with lean manufacturing,and robotic devices,follow criteria according to the needs of energy efficiency,energy saving,usability,reliability,thermo-hygrometric well-being,appearance,visual,acoustic well-being,reduction costs,safety of building systems and productivity.We highlight the strategic application of integrated design instrumentation and methodologies,digital fabrication,for intelligent,dynamic,adaptive and LED enclosures,BIPV(building integrated photovoltaics)with intelligent glass facades integrated with photovoltaic panels,with hybrid hydrogen systems and integration of RES(renewable energy sources)on the network,and their reliability.The criteria are for the use of clean energy with renewable resources.The challenge is new building models,with an increase in scientific support,in the application of intelligent glass technologies and in the efficient use of the various solutions that aim to reduce energy needs,with passive use of clean energy from RES.展开更多
Innovation and energy efficiency are the essential paradigms of the new technology and design culture, in the sustainable economic and social development, highlighting the performance of new technologies, systems and ...Innovation and energy efficiency are the essential paradigms of the new technology and design culture, in the sustainable economic and social development, highlighting the performance of new technologies, systems and intelligent materials, such as sustainable identities in architectural envelopes. Then, contextualized sustainable architectural objectives favor material and energy flows, pointing to the constructive flexibility, identity and compatibility of technological innovation, which contrasts with climate change. So sustainable use of natural resources, renewable energy, in line with the principles of the 2030 Agenda for SDGs （Sustainable Development Goals）. The well-being of the community with the valorisation of places and the environment, indicates the technological excellence of architecture, synchronous with territorial metamorphoses. Thus, vision glass principles in the environmentally responsive wall, and engineered wall, in external awareness, cellular flooring for eco-efficiency. The methodologies indicate the applications of new design models for new constructions and regeneration, with dynamic, efficient and integrated envelopes integrated with renewable energy storage technologies, neomaterials and high performance insulating. Then HPP （high performance polymers） nanotechnologies are based on efficient pigments, intelligent bioPCM （PCM for phase change material） nano technologies, thermoregulators with high thermal inertia. The goal is towards an escalation of sustainable architectures that contrasts with climate change and pollution ofanthropic origin, for smart and sustainable growth.展开更多
Sustainable architecture is complex. Many aspects, differently important to many stakeholders, are to be optimized. BIM should be used for this. Building Information Modellingis a collaborative process where all stake...Sustainable architecture is complex. Many aspects, differently important to many stakeholders, are to be optimized. BIM should be used for this. Building Information Modellingis a collaborative process where all stakeholders integrate and optimize their information in a digital 3D model. Sometimes it is called Green BIM. But what exactly is that？ Is the International Standard Organization IFC standard useful for this？ And is it compatible with new developments in parametric design？ Advantages and disadvantages of BIM are listed. Full parametric design is needed because it keeps the design flexible and open for changes until the end of the design process. However it is not compatible with IFC; only object parametric design is. A possible way out of this paradox could be the use of scripts that only create objects if they are not already in the BIM database and otherwise only adapt their properties. An example of parametric sustainable architectural design explains the mentioned issues.展开更多
Avala Hotel in Budva, Montenegro, has undergone three reconstructions. Each of them led to significant spatial changes. The first hotel established the foundation of urbanization process in Budva, the building was too...Avala Hotel in Budva, Montenegro, has undergone three reconstructions. Each of them led to significant spatial changes. The first hotel established the foundation of urbanization process in Budva, the building was too high compared to the old town walls in the surrounding and thus not well integrated. The second reconstruction was the only successful achievement. At this time, in the first detailed urban plan including hotel and its surrounding area, the conclusion was that it represents ＂high-quality, seaside-favorable ambience＂ that should not be harmed by further building expansion. The last, illegal reconstruction in 2006 resulted in over enlarged new building disrespectful of the surrounding and the previous design. Similarly, the 2008 new detailed urban plan was the creation of ＂investors＇ urban planning＂. Entirely driven by profit, it arranges building reconstructions with multiple enlargements. This study tends to point out contextual impacts of the three hotels on the surrounding area, with special focus on the last reconstruction and ＂investors＇ urban planning＂ phenomena. The applied research method is comparative, chronological analysis of the three hotels. The aim of this research paper is to inspire initiatives that will help overcoming declining and harmful synergy of architecture and new socio-economic phenomena. It is the only way leading to the significant architectural goal： creating refined, harmonized and high quality ambience.展开更多
Application of local elements in contemporary architectural creation is a process of keeping pace with the times. This paper analyzed several creations of contemporary regional architecture, and discussed the effectiv...Application of local elements in contemporary architectural creation is a process of keeping pace with the times. This paper analyzed several creations of contemporary regional architecture, and discussed the effective approach of achieving the co-existence between tradition and modernity in architectural designs. Against the background of current social cultural development, interpretation of regional architectural culture was reviewed from three perspectives of traditional construction vocabularies, specific regional problems, local cultural artistic ambience. This paper tries to further understand reconstruction of vernacular dwellings, speculate the marginalized regional architectural creation in the fast-developing and "explosive" construction movements.展开更多
The paper looks at some bridge structures from ancient aqueducts to the most recent viaducts since people have always built structures that help them to cross terrain obstacles such as rivers, ravines and hills. Their...The paper looks at some bridge structures from ancient aqueducts to the most recent viaducts since people have always built structures that help them to cross terrain obstacles such as rivers, ravines and hills. Their primary goal has functionality and efficiency rather than aesthetic considerations and, yet from a time perspective, they still impress with their beauty and perfection. Gradually, architects began to take care of the form of bridges, as in the case of the Rialto Bridge in Venice. Nowadays, the most renowned architects, with Norman Foster in the lead, take up the design of bridge ＂architecture＂. Although technical solutions remain top priority, aesthetic qualities are widely recognized and appreciated.展开更多
The aim of this work is to illuminate how the architectural publication in Brazil is influenced by the location of its economic poles. Although the main specialized journals are nationwide read and the published proje...The aim of this work is to illuminate how the architectural publication in Brazil is influenced by the location of its economic poles. Although the main specialized journals are nationwide read and the published projects are frequently used as design references by students at architecture schools all over Brazil, it appears to be a favor for those projects located at the southeast region. In order to investigate this initial assumption, we selected two of the most influential architectural journals, A U and Project Design magazines, focusing on visitable projects that are, therefore, capable of offering an experience for learning about architectural project. The analysis covered three years of publications in which four states in Brazil were distinguished： Sao Paulo, Rio de Janeiro, Minas Gerais and Federal District. The collected data show that the published visitable projects coincide with the economic poles around centered cities in Brazil, as well as the location of architecture schools and specialized media, becomes evident; not only because of the greater number of projects in the Sao Paulo area, but mainly because most of the published projects are located in the capitals of the analyzed poles.展开更多
In cold regions,rock structures will be weakened by freeze-thaw cycles under various water immersion conditions.Determining how water immersion conditions impact rock deterioration under freeze-thaw cycles is critical...In cold regions,rock structures will be weakened by freeze-thaw cycles under various water immersion conditions.Determining how water immersion conditions impact rock deterioration under freeze-thaw cycles is critical to assess accurately the frost resistance of engineered rock.In this paper,freeze-thaw cycles(temperature range of-20℃-20℃)were performed on the sandstones in different water immersion conditions(fully,partially and non-immersed in water).Then,computed tomography(CT)tests were conducted on the sandstones when the freeze-thaw number reached 0,5,10,15,20 and 30.Next,the effects of water immersion conditions on the microstructure deterioration of sandstone under freezethaw cycles were evaluated using CT spatial imaging,porosity and damage factor.Finally,focusing on the partially immersed condition,the immersion volume rate was defined to understand the effects of immersion degree on the freeze-thaw damage of sandstone and to propose a damage model considering the freeze-thaw number and immersion degree.The results show that with increasing freeze-thaw number,the porosities and damage factors under fully and partially immersed conditions increase continuously,while those under non-immersed condition first increase and then remain approximately constant.The most severe freeze-thaw damage occurs in fully immersed condition,followed by partially immersed condition and finally non-immersed condition.Interestingly,the freeze-thaw number and the immersion volume rate both impact the microstructure deterioration of the partially immersed sandstone.For the same freeze-thaw number,the damage factor increases approximately linearly with increasing immersion volume rate,and the increasing immersion degree exacerbates the microstructure deterioration of sandstone.Moreover,the proposed model can effectively estimate the freeze-thaw damage of partially immersed sandstone with different immersion volume rates.展开更多
Investigations into rail corrugation within metro systems have traditionally focused on specific mechanisms,thereby limiting the generalizability of proposed theories.Understanding the commonalities in rail corrugatio...Investigations into rail corrugation within metro systems have traditionally focused on specific mechanisms,thereby limiting the generalizability of proposed theories.Understanding the commonalities in rail corrugation across diverse metro lines remains pivotal for elucidating its underlying mechanisms.The present study conducted extensive field surveys and tracking tests across 14 Chinese metro lines.By employing t-distributed stochastic neighbor embedding(t-SNE)for dimensional reduction and employing the unsupervised clustering algorithm DBSCAN,the research redefines the classification of metro rail corrugation based on characteristic information.The analysis encompassed spatial distribution and temporal evolution of this phenomenon.Findings revealed that floating slab tracks exhibited the highest proportion of rail corrugation at 47%.Notably,ordinary monolithic bed tracks employing damping fasteners were more prone to inducing rail corrugation.Corrugation primarily manifested in curve sections with radii between 300 and 500 m,featuring ordinary monolithic bed track and steel-spring floating slab track structures,with wavelengths typically between 30 and 120 mm.Stick–slip vibrations of the wheel–rail system maybe led to short-wavelength corrugations(40–60 mm),while longer wavelengths(200–300 mm)exhibited distinct fatigue damage characteristics,mainly observed in steel-spring floating slab tracks and small-radius curve sections of ordinary monolithic bed tracks and ladder sleeper tracks.A classification system comprising 57 correlated features categorized metro rail corrugation into four distinct types.These research outcomes serve as critical benchmarks for validating various theories pertaining to rail corrugation formation.展开更多
In the literature that follows the history and theory of architecture,architecture is mainly studied from the aspect of disposition,construction and materialization“in itself”,sporadically establishing the“original...In the literature that follows the history and theory of architecture,architecture is mainly studied from the aspect of disposition,construction and materialization“in itself”,sporadically establishing the“originality”(first appearance)of certain dimensions of architectural solutions and their connection with solutions from previous historical epochs.The title of this work(Network of Architectural Paths)suggests the simultaneous uniqueness(authenticity)of people and their culture throughout the planet Earth and comprehensiveness(universality)of human ideas and all forms of human creativity.The aim of this work is to show the authenticity of ideas(expressed by architecture)in accordance with the concrete natural and social environment and,at the same time,their mutual connection(networking)on the global world level(Earth).Examples of vernacular architecture in various parts of the world and examples of author’s(contemporary)architecture in other parts of the world that are articulated in the language of the modern era while preserving the concepts of their vernecular“models”are thus compared.The methodological approach in this paper is based on the author’s theory of architecture,which he described and published in his book:Hadrovic,A.(2007).Defining Architectural Space on the Model of the Oriental Style CityHouse in Bosnia and Herzegovina,Serbia,Montenegro,Kosovo and Macedonia,Booksurge,LLC,North Charleston,SC,USA.展开更多
Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significan...Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significant gap in detailed and consistent data on 3D building space structures with global coverage due to the challenges inherent in the data collection and model calibration processes.In this study,we constructed a global urban structure(GUS-3D)dataset,including building volume,height,and footprint information,at a 500 m spatial resolution using extensive satellite observation products and numerous reference building samples.Our analysis indicated that the total volume of buildings worldwide in2015 exceeded 1×10^(12)m^(3).Over the 1985 to 2015 period,we observed a slight increase in the magnitude of 3D building volume growth(i.e.,it increased from 166.02 km3 during the 1985–2000 period to 175.08km3 during the 2000–2015 period),while the expansion magnitudes of the two-dimensional(2D)building footprint(22.51×10^(3) vs 13.29×10^(3)km^(2))and urban extent(157×10^(3) vs 133.8×10^(3)km^(2))notably decreased.This trend highlights the significant increase in intensive vertical utilization of urban land.Furthermore,we identified significant heterogeneity in building space provision and inequality across cities worldwide.This inequality is particularly pronounced in many populous Asian cities,which has been overlooked in previous studies on economic inequality.The GUS-3D dataset shows great potential to deepen our understanding of the urban environment and creates new horizons for numerous 3D urban studies.展开更多
[Objective]Mental health is the essence of physical health,human beings pay more and more attention to the study of mental health recovery and after many studies,it is clear that the restorative environment has an imp...[Objective]Mental health is the essence of physical health,human beings pay more and more attention to the study of mental health recovery and after many studies,it is clear that the restorative environment has an important and positive significance for their mental recovery,and species as an important part of the environment since the natural environment has been used as an essential part of the research environment,based on the conditions of such a social reality,this paper analyzed the articles on species surveys in the last 30 years,used the data to reflect the importance of species survey,and the research hotspot of restorative environment.[Methods]The study analyzed the data in articles about species survey in CNKI database from 1994 to 2024 through Citespace visualization,and analyzed the data through the number of articles issued between years,keyword co-occurrence and other aspects,so as to give data support for the research of restorative environment.[Results]In the past 30 years,the number of articles published on species survey has increased year by year,and species survey is at the forefront of research hotspots.Clustering and timeline analysis results of insects,birds,diversity has become more important.[Conclusions]From the 621 articles,the following aspects could be concluded:(1)The importance of restorative environments research and the vast exchanges among scholars have been reflected and more research hotspots have been explored in this field;(2)For the research direction of restorative environments and this paper,the research hotspots were in line with the in-depth exploration of species diversity,which was not only in the field of species,but also in the field of health and the environment,and there were also investigations of the links;(3)The interdependence between species diversity and restorative environments was high,further research on restorative environments largely depended on the study of species surveys.展开更多
The article examines the physical,petrographic,mineralogical,and microstructural properties of mortar samples taken from a medieval structure located in northwestern Anatolia.Six mortar samples collected from the stru...The article examines the physical,petrographic,mineralogical,and microstructural properties of mortar samples taken from a medieval structure located in northwestern Anatolia.Six mortar samples collected from the structure were analyzed using advanced techniques such as acid loss,ignition loss,sieve analysis,physical analyses,polarizing and stereo microscope observations,SEM-EDS,XRD,and TGA.The mortars examined exhibit hydraulic properties.The hydraulic character of the mortars is mainly provided by brick dust and aggregates exhibiting pozzolanic activity.Acid loss and ignition loss analyses indicate that the binder-aggregate ratios vary between 1:1 and 1:3.The elemental and mineral composition of these mortars was analyzed using EDS and XRD,respectively.Analytical techniques revealed the presence of quartz,feldspar,muscovite,biotite,vaterite,and aragonite crystals.The results were supported by thermogravimetric analysis.This study provides important references for the formulation of compatible repair mortars to ensure the proper preservation of materials used in masonry walls of large-scale structures in similar geographical areas.It is intended that this study,based on the examination of mortar samples taken from the structure,will contribute to future research.展开更多
Lime mortars have a rich history of being blended with organic additives to address weaknesses such as low setting time and hydric properties.This study specifically investigates the impact of incorporating straw and ...Lime mortars have a rich history of being blended with organic additives to address weaknesses such as low setting time and hydric properties.This study specifically investigates the impact of incorporating straw and sesame oil into lime mortar mixes,focusing on their influence on open porosity,permeability,water absorption,and durability.While previous studies explored the effects of natural fibers and fatty acid additives on lime mortars separately,this study examines their simultaneous incorporation in mortars.The results demonstrated that the simultaneous addition of sesame oil and straw decreased the water absorption values of the mortars to 77%.Furthermore,the inclusion of sesame oil resulted in a significant 30%increase in impermeability values.However,when both sesame oil and straw were added together,the increase in impermeability was less than 20%compared to the reference mortar with no additives.These findings highlights that the combined addition of sesame oil and straw has a lesser impact on the permeability values of mortars,which is a positive outcome,as maintaining optimal permeability is essential for the long-term preservation of historical substrates.The combination of straw and sesame oil enhances hydric properties without undermining the mortar’s structure and permeability.These results emphasize the sustainable nature of lime mortars in restoration projects,showcasing their compatibility with traditional masonry practices.By combining natural fibers with fatty acids,mortars demonstrate improved durability,offering a promising avenue for enhancing performance while retaining essential properties.展开更多
The shear pin of the friction pendulum bearing(FPB)can be made of 40Cr steel.In conceptual design,the optimal cut-off point of the shear pin is predetermined,guiding the design of bridges isolated by FPBs to maximize ...The shear pin of the friction pendulum bearing(FPB)can be made of 40Cr steel.In conceptual design,the optimal cut-off point of the shear pin is predetermined,guiding the design of bridges isolated by FPBs to maximize their isolation performance.Current researches on the shear pins are mainly based on linear elastic models,neglecting their plasticity,damage,and fracture mechanical properties.To accurately predict its cutoff behavior,the elastic-plastic degradationmodel of 40Cr steel is indeed calibrated.For this purpose,the Ramberg-Osgoodmodel,the Bao-Wierzbicki damage initiation criterion,and the linear damage evolution criterion were selected to develop the elastic-plastic degradation model of 40Cr.Subsequently,parameter calibration of this model was performed through uniaxial tensile tests on two sets of six smooth,round bars with different diameters.Following this,finite element simulations were conducted for the pure shear test of grade 10.9 high-strength bolts made of 40Cr steel,aiming to verify the elasticplastic degradation model.The results showed that the failure modes and force-displacement curves simulated by the finite element method were in good agreement with the test results.Moreover,the error between the primary characteristic parameters(initial stiffness,peak load,fracture displacement,and absorbed energy)obtained by finite element calculation and the test values was within 15%.These results demonstrated that the calibration elastic-plastic degradation model of 40Cr steel can predict the cutoff of the shear pin.展开更多
The growth and scale of urbanisation in Indonesia poses various challenges,including the availability of affordable housing,which has forced many low-income people to live in informal settlements.Fires account for 15%...The growth and scale of urbanisation in Indonesia poses various challenges,including the availability of affordable housing,which has forced many low-income people to live in informal settlements.Fires account for 15%of all disasters in Indonesia,particularly in densely populated urban areas such as informal settlements.The nature of informal settlements,which lack basic services along with poor living conditions,increases the like-lihood of fire.The topic of informal settlement fires in Indonesia is relatively unresearched,especially studies tailored to waterfront informal settlements typologies which prevents an understanding of fire risk and its impact in the area.This study aims to investigate what aspects influence fire risk in the area and to increase the resilience of informal settlements to fire outbreaks with the intention of improving community resilience.A case study with mixed methods is employed in this study.Our study consists of two phases of data analysis.The first phase consists of spatial analysis,derivation of weight,risk assessment,sensitivity analysis,and identification of policy drivers.Meanwhile,the second phase of our data analysis consists of analysing conditions,challenges,and opportunities,resilient strategies development,and scenario testing.The results of this study revealed that the risk of fire in the area is considered high-to-very high,which is driven primarily by moderate hazard,high vulnerability,and low-to-very low capacity against fire.Primary drivers of fire risk in the area are building materials,electrical connection and equipment,road width,and building density.As a result,this study proposed nine physical and non-physical resilient strategies which has been categorised into three distinct aspects:development planning,development regulations,and risk management and response.Spatial analysis revealed that,if fully implemented and operationalised,these strategies could reclassify 90%of the area to moderate risk.Further research is should examine the causal factors of past fire incidents,the institutional capacity for fire management,and the socioeconomic conditions of the community.展开更多
文摘This study investigates the thermo–mechanical behavior of C40 concrete and reinforced concrete subjected to elevated temperatures up to 700℃by integrating experimental testing and advanced numerical modeling.A temperature-indexed Concrete Damage Plasticity(CDP)framework incorporating bond–slip effects was developed in Abaqus to capture both global stress–strain responses and localized damage evolution.Uniaxial compression tests on thermally exposed cylinders provided residual strength data and failure observations for model calibration and validation.Results demonstrated a distinct two-stage degradation regime:moderate stiffness and strength reduction up to~400℃,followed by sharp deterioration beyond 500℃–600℃,with residual capacity at 700℃reduced to~20%–25%of the ambient value.Strain–damage analyses revealed the formation of a peripheral tensile strain band,which thickened and propagated inward with increasing temperature,governing crack initiation and cover spalling.Supplemental analyses highlighted that transverse reinforcement improved ductility and damage distribution at moderate temperatures(~300℃),but bond deterioration and steel softening beyond~600℃substantially diminished confinement effectiveness.The proposed CDP model accurately reproduced experimental stress–strain curves(R^(2)≈0.94–0.98 up to 600℃;≈0.90 at 700℃),with peak stress errors within 7%–10%and energy absorption captured within~12%.These findings confirm the robustness of the temperature-indexed CDP framework for simulating fire-damaged reinforced concrete and provide practical guidelines for post-fire assessment,spalling detection,and fire-resilient design of structural members.
基金funded by the HORIZON EUROPE's project"eco2adapt"(Ecosystem-based Adaptation and Changemaking to Shape,Project,and Sustain the Resilience of Tomorrow's Forests,Grant no:101059498)。
文摘Climate change is impacting forests in Central Europe,causing increased mortality and degradation of forest ecosystem services(FES).As global warming intensifies,these effects are likely to worsen,particularly through more severe droughts and increased biotic disturbances.Understanding how forests respond to different levels of warming is essential for adaptation planning.Therefore,this study analyzed changes in forest structure and FES,including timber production,climate change mitigation,recreation,and structural diversity,under three global warming scenarios.Using the LandClim model,we compared warming levels of 1.5,2,and 3℃above preindustrial temperatures,based on 30-year periods from RCP data,to historical climate.Our research focused on Freiburg's forests in southwestern Germany,characterized by diverse tree species and an elevation range of 200–1,250 m a.s.l.A warming of 1.5℃could temporarily increase productivity,but at 2℃,biomass losses of up to 10%would occur below elevations of 450 m due to drought mortality.Under 3℃,losses would intensify below 650 m up to 40%,with even drought-resistant species like pedunculate oak experiencing mortality.At higher elevations,bark beetle outbreaks caused mortality of Norway spruce,while European beech capitalized on the changing ecological conditions.Higher warming levels significantly deteriorated FES,particularly timber production,climate change mitigation,and structural diversity,while recreation was less affected.These findings emphasize the urgency of meeting Paris Agreement targets,as limiting warming below 2℃can reduce severe impacts.If warming exceeds this critical threshold,even species presently considered drought-resistant,such as native sessile and pedunculate oaks and non-native red oak,could face serious threats at lower elevations.This would undermine the effectiveness of current management strategies,as these tree species are key to providing multiple FES.
文摘The expression of traditional Chinese literati is based on connection, seeking emotion and harmony. With various forms, though, this style of expression shares the same value in some art forms, like traditional Chinese poetry, calligraphy and paintings, and Chinese architecture. Based on the commonalities of various forms of literature and art, this paper offered an insight into Chinese architecture in light of poetic and pictorial expression of traditional Chinese literati. In order to illuminate the corresponding connection between traditional Chinese poetry, calligraphy and paintings, and Chinese architecture, this paper discussed the expression of Chinese architecture corresponding to the essence of traditional Chinese poetry, calligraphy and paintings respectively from the perspective of philosophy, aesthetics, and culture study of Chinese architecture. Via analogous analysis, which includes the analogy between the emotion of architecture and the feelings in traditional poetry, the analogy between the order of architecture and the spirit of calligraphy, and the analogy between the artistic conception and the picturesque scene, the poetic and pictorial expression of Chinese architecture was clarified. This paper emphasized that Chinese architecture needs to jump out of the concrete image, eradicate the interdisciplinary boundaries, and stress the integration of arts and humanities in a higher level, to express Chinese architecture in a Chinese way. That means making Chinese architecture modern in forms and techniques, and traditional in spirit and artistic conception.
文摘The new production models that aim at both the improvement of the various new processes and the existing ones,create new markets with innovative business methods and introduce sufficient technological solutions for the conversion and enhancement of electricity in construction.The objectives are of innovative glass technologies in the new building process with lean manufacturing,and robotic devices,follow criteria according to the needs of energy efficiency,energy saving,usability,reliability,thermo-hygrometric well-being,appearance,visual,acoustic well-being,reduction costs,safety of building systems and productivity.We highlight the strategic application of integrated design instrumentation and methodologies,digital fabrication,for intelligent,dynamic,adaptive and LED enclosures,BIPV(building integrated photovoltaics)with intelligent glass facades integrated with photovoltaic panels,with hybrid hydrogen systems and integration of RES(renewable energy sources)on the network,and their reliability.The criteria are for the use of clean energy with renewable resources.The challenge is new building models,with an increase in scientific support,in the application of intelligent glass technologies and in the efficient use of the various solutions that aim to reduce energy needs,with passive use of clean energy from RES.
文摘Innovation and energy efficiency are the essential paradigms of the new technology and design culture, in the sustainable economic and social development, highlighting the performance of new technologies, systems and intelligent materials, such as sustainable identities in architectural envelopes. Then, contextualized sustainable architectural objectives favor material and energy flows, pointing to the constructive flexibility, identity and compatibility of technological innovation, which contrasts with climate change. So sustainable use of natural resources, renewable energy, in line with the principles of the 2030 Agenda for SDGs （Sustainable Development Goals）. The well-being of the community with the valorisation of places and the environment, indicates the technological excellence of architecture, synchronous with territorial metamorphoses. Thus, vision glass principles in the environmentally responsive wall, and engineered wall, in external awareness, cellular flooring for eco-efficiency. The methodologies indicate the applications of new design models for new constructions and regeneration, with dynamic, efficient and integrated envelopes integrated with renewable energy storage technologies, neomaterials and high performance insulating. Then HPP （high performance polymers） nanotechnologies are based on efficient pigments, intelligent bioPCM （PCM for phase change material） nano technologies, thermoregulators with high thermal inertia. The goal is towards an escalation of sustainable architectures that contrasts with climate change and pollution ofanthropic origin, for smart and sustainable growth.
文摘Sustainable architecture is complex. Many aspects, differently important to many stakeholders, are to be optimized. BIM should be used for this. Building Information Modellingis a collaborative process where all stakeholders integrate and optimize their information in a digital 3D model. Sometimes it is called Green BIM. But what exactly is that？ Is the International Standard Organization IFC standard useful for this？ And is it compatible with new developments in parametric design？ Advantages and disadvantages of BIM are listed. Full parametric design is needed because it keeps the design flexible and open for changes until the end of the design process. However it is not compatible with IFC; only object parametric design is. A possible way out of this paradox could be the use of scripts that only create objects if they are not already in the BIM database and otherwise only adapt their properties. An example of parametric sustainable architectural design explains the mentioned issues.
文摘Avala Hotel in Budva, Montenegro, has undergone three reconstructions. Each of them led to significant spatial changes. The first hotel established the foundation of urbanization process in Budva, the building was too high compared to the old town walls in the surrounding and thus not well integrated. The second reconstruction was the only successful achievement. At this time, in the first detailed urban plan including hotel and its surrounding area, the conclusion was that it represents ＂high-quality, seaside-favorable ambience＂ that should not be harmed by further building expansion. The last, illegal reconstruction in 2006 resulted in over enlarged new building disrespectful of the surrounding and the previous design. Similarly, the 2008 new detailed urban plan was the creation of ＂investors＇ urban planning＂. Entirely driven by profit, it arranges building reconstructions with multiple enlargements. This study tends to point out contextual impacts of the three hotels on the surrounding area, with special focus on the last reconstruction and ＂investors＇ urban planning＂ phenomena. The applied research method is comparative, chronological analysis of the three hotels. The aim of this research paper is to inspire initiatives that will help overcoming declining and harmful synergy of architecture and new socio-economic phenomena. It is the only way leading to the significant architectural goal： creating refined, harmonized and high quality ambience.
文摘Application of local elements in contemporary architectural creation is a process of keeping pace with the times. This paper analyzed several creations of contemporary regional architecture, and discussed the effective approach of achieving the co-existence between tradition and modernity in architectural designs. Against the background of current social cultural development, interpretation of regional architectural culture was reviewed from three perspectives of traditional construction vocabularies, specific regional problems, local cultural artistic ambience. This paper tries to further understand reconstruction of vernacular dwellings, speculate the marginalized regional architectural creation in the fast-developing and "explosive" construction movements.
文摘The paper looks at some bridge structures from ancient aqueducts to the most recent viaducts since people have always built structures that help them to cross terrain obstacles such as rivers, ravines and hills. Their primary goal has functionality and efficiency rather than aesthetic considerations and, yet from a time perspective, they still impress with their beauty and perfection. Gradually, architects began to take care of the form of bridges, as in the case of the Rialto Bridge in Venice. Nowadays, the most renowned architects, with Norman Foster in the lead, take up the design of bridge ＂architecture＂. Although technical solutions remain top priority, aesthetic qualities are widely recognized and appreciated.
文摘The aim of this work is to illuminate how the architectural publication in Brazil is influenced by the location of its economic poles. Although the main specialized journals are nationwide read and the published projects are frequently used as design references by students at architecture schools all over Brazil, it appears to be a favor for those projects located at the southeast region. In order to investigate this initial assumption, we selected two of the most influential architectural journals, A U and Project Design magazines, focusing on visitable projects that are, therefore, capable of offering an experience for learning about architectural project. The analysis covered three years of publications in which four states in Brazil were distinguished： Sao Paulo, Rio de Janeiro, Minas Gerais and Federal District. The collected data show that the published visitable projects coincide with the economic poles around centered cities in Brazil, as well as the location of architecture schools and specialized media, becomes evident; not only because of the greater number of projects in the Sao Paulo area, but mainly because most of the published projects are located in the capitals of the analyzed poles.
基金funding support from the National Natural Science Foundation of China(Grant No.12172019).
文摘In cold regions,rock structures will be weakened by freeze-thaw cycles under various water immersion conditions.Determining how water immersion conditions impact rock deterioration under freeze-thaw cycles is critical to assess accurately the frost resistance of engineered rock.In this paper,freeze-thaw cycles(temperature range of-20℃-20℃)were performed on the sandstones in different water immersion conditions(fully,partially and non-immersed in water).Then,computed tomography(CT)tests were conducted on the sandstones when the freeze-thaw number reached 0,5,10,15,20 and 30.Next,the effects of water immersion conditions on the microstructure deterioration of sandstone under freezethaw cycles were evaluated using CT spatial imaging,porosity and damage factor.Finally,focusing on the partially immersed condition,the immersion volume rate was defined to understand the effects of immersion degree on the freeze-thaw damage of sandstone and to propose a damage model considering the freeze-thaw number and immersion degree.The results show that with increasing freeze-thaw number,the porosities and damage factors under fully and partially immersed conditions increase continuously,while those under non-immersed condition first increase and then remain approximately constant.The most severe freeze-thaw damage occurs in fully immersed condition,followed by partially immersed condition and finally non-immersed condition.Interestingly,the freeze-thaw number and the immersion volume rate both impact the microstructure deterioration of the partially immersed sandstone.For the same freeze-thaw number,the damage factor increases approximately linearly with increasing immersion volume rate,and the increasing immersion degree exacerbates the microstructure deterioration of sandstone.Moreover,the proposed model can effectively estimate the freeze-thaw damage of partially immersed sandstone with different immersion volume rates.
基金support extended by the Joint Funds of Beijing Municipal Natural Science Foundation and Fengtai Rail Transit Frontier Research(Grant No.L211006)the Fundamental Research Funds for the Central Universities(Science and technology leading talent team project,Grant No.2022JBXT010)+1 种基金the Fundamental Research Funds for the Central Universities(Grant No.2023YJS052)the National Natural Science Foundation of China(Grant No.52308426)。
文摘Investigations into rail corrugation within metro systems have traditionally focused on specific mechanisms,thereby limiting the generalizability of proposed theories.Understanding the commonalities in rail corrugation across diverse metro lines remains pivotal for elucidating its underlying mechanisms.The present study conducted extensive field surveys and tracking tests across 14 Chinese metro lines.By employing t-distributed stochastic neighbor embedding(t-SNE)for dimensional reduction and employing the unsupervised clustering algorithm DBSCAN,the research redefines the classification of metro rail corrugation based on characteristic information.The analysis encompassed spatial distribution and temporal evolution of this phenomenon.Findings revealed that floating slab tracks exhibited the highest proportion of rail corrugation at 47%.Notably,ordinary monolithic bed tracks employing damping fasteners were more prone to inducing rail corrugation.Corrugation primarily manifested in curve sections with radii between 300 and 500 m,featuring ordinary monolithic bed track and steel-spring floating slab track structures,with wavelengths typically between 30 and 120 mm.Stick–slip vibrations of the wheel–rail system maybe led to short-wavelength corrugations(40–60 mm),while longer wavelengths(200–300 mm)exhibited distinct fatigue damage characteristics,mainly observed in steel-spring floating slab tracks and small-radius curve sections of ordinary monolithic bed tracks and ladder sleeper tracks.A classification system comprising 57 correlated features categorized metro rail corrugation into four distinct types.These research outcomes serve as critical benchmarks for validating various theories pertaining to rail corrugation formation.
文摘In the literature that follows the history and theory of architecture,architecture is mainly studied from the aspect of disposition,construction and materialization“in itself”,sporadically establishing the“originality”(first appearance)of certain dimensions of architectural solutions and their connection with solutions from previous historical epochs.The title of this work(Network of Architectural Paths)suggests the simultaneous uniqueness(authenticity)of people and their culture throughout the planet Earth and comprehensiveness(universality)of human ideas and all forms of human creativity.The aim of this work is to show the authenticity of ideas(expressed by architecture)in accordance with the concrete natural and social environment and,at the same time,their mutual connection(networking)on the global world level(Earth).Examples of vernacular architecture in various parts of the world and examples of author’s(contemporary)architecture in other parts of the world that are articulated in the language of the modern era while preserving the concepts of their vernecular“models”are thus compared.The methodological approach in this paper is based on the author’s theory of architecture,which he described and published in his book:Hadrovic,A.(2007).Defining Architectural Space on the Model of the Oriental Style CityHouse in Bosnia and Herzegovina,Serbia,Montenegro,Kosovo and Macedonia,Booksurge,LLC,North Charleston,SC,USA.
基金supported by the National Science Fund for Distinguished Young Scholars(42225107)the National Natural Science Foundation of China(42001326,42371414,42171409,and 42271419)+1 种基金the Natural Science Foundation of Guangdong Province of China(2022A1515012207)the Basic and Applied Basic Research Project of Guangzhou Science and Technology Planning(202201011539)。
文摘Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significant gap in detailed and consistent data on 3D building space structures with global coverage due to the challenges inherent in the data collection and model calibration processes.In this study,we constructed a global urban structure(GUS-3D)dataset,including building volume,height,and footprint information,at a 500 m spatial resolution using extensive satellite observation products and numerous reference building samples.Our analysis indicated that the total volume of buildings worldwide in2015 exceeded 1×10^(12)m^(3).Over the 1985 to 2015 period,we observed a slight increase in the magnitude of 3D building volume growth(i.e.,it increased from 166.02 km3 during the 1985–2000 period to 175.08km3 during the 2000–2015 period),while the expansion magnitudes of the two-dimensional(2D)building footprint(22.51×10^(3) vs 13.29×10^(3)km^(2))and urban extent(157×10^(3) vs 133.8×10^(3)km^(2))notably decreased.This trend highlights the significant increase in intensive vertical utilization of urban land.Furthermore,we identified significant heterogeneity in building space provision and inequality across cities worldwide.This inequality is particularly pronounced in many populous Asian cities,which has been overlooked in previous studies on economic inequality.The GUS-3D dataset shows great potential to deepen our understanding of the urban environment and creates new horizons for numerous 3D urban studies.
基金Sponsored by The 2024 Inter-university Cooperation Project for Innovation and Entrepreneurship Training of College Students in Beijing Universities(202498025)National Natural Science Foundation of China(NSFC)(52278045).
文摘[Objective]Mental health is the essence of physical health,human beings pay more and more attention to the study of mental health recovery and after many studies,it is clear that the restorative environment has an important and positive significance for their mental recovery,and species as an important part of the environment since the natural environment has been used as an essential part of the research environment,based on the conditions of such a social reality,this paper analyzed the articles on species surveys in the last 30 years,used the data to reflect the importance of species survey,and the research hotspot of restorative environment.[Methods]The study analyzed the data in articles about species survey in CNKI database from 1994 to 2024 through Citespace visualization,and analyzed the data through the number of articles issued between years,keyword co-occurrence and other aspects,so as to give data support for the research of restorative environment.[Results]In the past 30 years,the number of articles published on species survey has increased year by year,and species survey is at the forefront of research hotspots.Clustering and timeline analysis results of insects,birds,diversity has become more important.[Conclusions]From the 621 articles,the following aspects could be concluded:(1)The importance of restorative environments research and the vast exchanges among scholars have been reflected and more research hotspots have been explored in this field;(2)For the research direction of restorative environments and this paper,the research hotspots were in line with the in-depth exploration of species diversity,which was not only in the field of species,but also in the field of health and the environment,and there were also investigations of the links;(3)The interdependence between species diversity and restorative environments was high,further research on restorative environments largely depended on the study of species surveys.
文摘The article examines the physical,petrographic,mineralogical,and microstructural properties of mortar samples taken from a medieval structure located in northwestern Anatolia.Six mortar samples collected from the structure were analyzed using advanced techniques such as acid loss,ignition loss,sieve analysis,physical analyses,polarizing and stereo microscope observations,SEM-EDS,XRD,and TGA.The mortars examined exhibit hydraulic properties.The hydraulic character of the mortars is mainly provided by brick dust and aggregates exhibiting pozzolanic activity.Acid loss and ignition loss analyses indicate that the binder-aggregate ratios vary between 1:1 and 1:3.The elemental and mineral composition of these mortars was analyzed using EDS and XRD,respectively.Analytical techniques revealed the presence of quartz,feldspar,muscovite,biotite,vaterite,and aragonite crystals.The results were supported by thermogravimetric analysis.This study provides important references for the formulation of compatible repair mortars to ensure the proper preservation of materials used in masonry walls of large-scale structures in similar geographical areas.It is intended that this study,based on the examination of mortar samples taken from the structure,will contribute to future research.
文摘Lime mortars have a rich history of being blended with organic additives to address weaknesses such as low setting time and hydric properties.This study specifically investigates the impact of incorporating straw and sesame oil into lime mortar mixes,focusing on their influence on open porosity,permeability,water absorption,and durability.While previous studies explored the effects of natural fibers and fatty acid additives on lime mortars separately,this study examines their simultaneous incorporation in mortars.The results demonstrated that the simultaneous addition of sesame oil and straw decreased the water absorption values of the mortars to 77%.Furthermore,the inclusion of sesame oil resulted in a significant 30%increase in impermeability values.However,when both sesame oil and straw were added together,the increase in impermeability was less than 20%compared to the reference mortar with no additives.These findings highlights that the combined addition of sesame oil and straw has a lesser impact on the permeability values of mortars,which is a positive outcome,as maintaining optimal permeability is essential for the long-term preservation of historical substrates.The combination of straw and sesame oil enhances hydric properties without undermining the mortar’s structure and permeability.These results emphasize the sustainable nature of lime mortars in restoration projects,showcasing their compatibility with traditional masonry practices.By combining natural fibers with fatty acids,mortars demonstrate improved durability,offering a promising avenue for enhancing performance while retaining essential properties.
基金The Research Start-up Fund for Talents Introduction of Huaiyin Institute of Technology(Grant No.Z301B23517).
文摘The shear pin of the friction pendulum bearing(FPB)can be made of 40Cr steel.In conceptual design,the optimal cut-off point of the shear pin is predetermined,guiding the design of bridges isolated by FPBs to maximize their isolation performance.Current researches on the shear pins are mainly based on linear elastic models,neglecting their plasticity,damage,and fracture mechanical properties.To accurately predict its cutoff behavior,the elastic-plastic degradationmodel of 40Cr steel is indeed calibrated.For this purpose,the Ramberg-Osgoodmodel,the Bao-Wierzbicki damage initiation criterion,and the linear damage evolution criterion were selected to develop the elastic-plastic degradation model of 40Cr.Subsequently,parameter calibration of this model was performed through uniaxial tensile tests on two sets of six smooth,round bars with different diameters.Following this,finite element simulations were conducted for the pure shear test of grade 10.9 high-strength bolts made of 40Cr steel,aiming to verify the elasticplastic degradation model.The results showed that the failure modes and force-displacement curves simulated by the finite element method were in good agreement with the test results.Moreover,the error between the primary characteristic parameters(initial stiffness,peak load,fracture displacement,and absorbed energy)obtained by finite element calculation and the test values was within 15%.These results demonstrated that the calibration elastic-plastic degradation model of 40Cr steel can predict the cutoff of the shear pin.
文摘The growth and scale of urbanisation in Indonesia poses various challenges,including the availability of affordable housing,which has forced many low-income people to live in informal settlements.Fires account for 15%of all disasters in Indonesia,particularly in densely populated urban areas such as informal settlements.The nature of informal settlements,which lack basic services along with poor living conditions,increases the like-lihood of fire.The topic of informal settlement fires in Indonesia is relatively unresearched,especially studies tailored to waterfront informal settlements typologies which prevents an understanding of fire risk and its impact in the area.This study aims to investigate what aspects influence fire risk in the area and to increase the resilience of informal settlements to fire outbreaks with the intention of improving community resilience.A case study with mixed methods is employed in this study.Our study consists of two phases of data analysis.The first phase consists of spatial analysis,derivation of weight,risk assessment,sensitivity analysis,and identification of policy drivers.Meanwhile,the second phase of our data analysis consists of analysing conditions,challenges,and opportunities,resilient strategies development,and scenario testing.The results of this study revealed that the risk of fire in the area is considered high-to-very high,which is driven primarily by moderate hazard,high vulnerability,and low-to-very low capacity against fire.Primary drivers of fire risk in the area are building materials,electrical connection and equipment,road width,and building density.As a result,this study proposed nine physical and non-physical resilient strategies which has been categorised into three distinct aspects:development planning,development regulations,and risk management and response.Spatial analysis revealed that,if fully implemented and operationalised,these strategies could reclassify 90%of the area to moderate risk.Further research is should examine the causal factors of past fire incidents,the institutional capacity for fire management,and the socioeconomic conditions of the community.
