Background:Diabetic foot,a severe complication of diabetes,is characterized by chronic refractory wounds.Sanhuang Oil,a topical herbal formula,demonstrates significant therapeutic effects including antibacterial,anti-...Background:Diabetic foot,a severe complication of diabetes,is characterized by chronic refractory wounds.Sanhuang Oil,a topical herbal formula,demonstrates significant therapeutic effects including antibacterial,anti-inflammatory,and immunomodulatory activities.However,its active constituents and mechanisms of action against diabetic foot remain to be elucidated.Methods:In this study,the chemical constituents of Sanhuang Oil were identified using UPLC-QE-Orbitrap-MS.Subsequently,the mechanism by which Sanhuang Oil promotes diabetic foot ulcer healing was predicted by integrating network pharmacology and molecular docking.Additionally,diabetic mouse model was established in ICR mice using a combination of a high-fat diet(HFD)and streptozotocin(STZ)chemical induction.A full-thickness skin defect was created on the dorsum of the mice.Wound healing and the healing rate were observed following Sanhuang Oil intervention.The mechanism underlying Sanhuang Oil’s promotion of diabetic ulcer healing was further investigated using transcriptomics and histopathological examination(H&E staining).Results:A total of 97 active ingredients were identified from Sanhuang Oil.Network pharmacology analysis predicted 543 common targets,and Kyoto Encyclopedia of Genes and Genomes(KEGG)pathway enrichment analysis identified 203 relevant pathways.Molecular docking further confirmed high binding affinity(binding energy≤−5.0 kcal/mol)between specific active components in Sanhuang Oil(e.g.,coptisine,phellodendrine,baicalein)and key targets associated with diabetic foot ulcers(e.g.,EGFR,AKT1,STAT3).In vivo experimental results demonstrated that the wound healing rate was significantly higher in Sanhuang Oil-treated groups compared to the model group(P<0.001).HE staining revealed that the high-dose Sanhuang Oil group exhibited more pronounced epithelial tissue coverage over the wound,reduced inflammatory cell infiltration,and increased collagen deposition and fibroblast proliferation.transcriptomic analysis identified Pdk4,Ttn,Csrp3,Actn2,Myoz2,Tnnc2,Myod1,Myog,Myot,and Myf6 as key regulatory proteins involved in promoting wound healing.Conclusion:Sanhuang Oil promotes wound healing in diabetic ulcer mice,potentially by mitigating inflammation and regulating key targets such as Pdk4 to enhance fibroblast function.These findings provide novel insights into the multi-target,multi-pathway mechanism of Sanhuang Oil for treating diabetic foot ulcers.展开更多
To realize dynamic statistical publishing and protection of location-based data privacy,this paper proposes a differential privacy publishing algorithm based on adaptive sampling and grid clustering and adjustment.The...To realize dynamic statistical publishing and protection of location-based data privacy,this paper proposes a differential privacy publishing algorithm based on adaptive sampling and grid clustering and adjustment.The PID control strategy is combined with the difference in data variation to realize the dynamic adjustment of the data publishing intervals.The spatial-temporal correlations of the adjacent snapshots are utilized to design the grid clustering and adjustment algorithm,which facilitates saving the execution time of the publishing process.The budget distribution and budget absorption strategies are improved to form the sliding window-based differential privacy statistical publishing algorithm,which realizes continuous statistical publishing and privacy protection and improves the accuracy of published data.Experiments and analysis on large datasets of actual locations show that the privacy protection algorithm proposed in this paper is superior to other existing algorithms in terms of the accuracy of adaptive sampling time,the availability of published data,and the execution efficiency of data publishing methods.展开更多
Electrochemically switched ion exchange(ESIX)is an effective technology for extracting high-valueadded ions from dilute solutions.This study focuses on Li^(+)extraction by employing a comprehensive model to analyze in...Electrochemically switched ion exchange(ESIX)is an effective technology for extracting high-valueadded ions from dilute solutions.This study focuses on Li^(+)extraction by employing a comprehensive model to analyze interaction between fluidic dynamics,electric field and ion transport.The model combines Butler-Volmer equation modified by electroactive site concentration,Nernst-Planck equation and Navier-Stokes equation.It is found that the chamber width affects solution phase resistance,thereby altering the pote ntial distribution and influencing the current distribution within the membrane.A narrow chamber increases current density in the solid phase of the membrane,enhancing Li^(+) extraction.The solution flow-field not only enhances convective transport but also increases the current density in the solid phase,promoting Li^(+) extraction.There is a synergistic effect between fluid-flow-field and electric-field for ion separation,which is only significant when the chamber width is greater than 2 mm.The synergistic mechanism differs from that in the capacitive deionization system.Therefore,the performance decline caused by a wide chamber can be compensated for by increasing the fluid-flow rate,utilizing the synergistic effect between the flu id-flow-field and electric-field to optimize the lithium extraction efficiency in the ESIX system.展开更多
The capacity to predict X-ray transition and K-edge energies in dense finite-temperatur plasmas with high precision is of primary importance for atomic physics of matter under extreme conditions.The dual characteristi...The capacity to predict X-ray transition and K-edge energies in dense finite-temperatur plasmas with high precision is of primary importance for atomic physics of matter under extreme conditions.The dual characteristics of bound and continuum states in dense matter are modeled by a valence-band-like structure in a generalized ion-sphere approach with states that are either bound,free,or mixed.The self-consistent combination of this model with the Dirac wave equations of multielectron bound states allows one to fully respect the Pauli principle and to take into account the exact nonlocal exchange terms.The generalized method allows very high precision without implication of calibration shifts and scaling parameters and therefore has predictive power.This leads to new insights in the analysis of various data.The simple ionization model representing the K-edge is generalized to excitation–ionization phenomena resulting in an advanced interpretation of ionization depression data in near-solid-density plasmas.The model predicts scaling relations along the isoelectronic sequences and the existence of bound M-states that are in excellent agreement with experimental data,whereas other methods have failed.The application to unexplained data from compound materials also gives good agreement without the need to invoke any additional assumptions in the generalized model,whereas other methods have lacked consistency.展开更多
Aiming to control lake eutrophication,proposed methods for convenient and faithworthy lake water quality evaluation are warranted.Optical measurement of dissolved organic matter(DOM)demonstrates great potential for es...Aiming to control lake eutrophication,proposed methods for convenient and faithworthy lake water quality evaluation are warranted.Optical measurement of dissolved organic matter(DOM)demonstrates great potential for estimating organic matter(OM)composition,and can thus serve as a proxy for conventional chemical oxygen demand(COD_(Mn))measurements,which are considered as imprecise and environmentally unfriendly.Hence,we conducted a field campaign across 30 lakes in Wuhan's metropolitan area,collecting 255 samples from varying trophic states to evaluate the predictive capability of COD_(Mn)using DOM optical measurements combined with parallel factor(PARAFAC)analysis.The DOM optical properties and chemical composition exhibited considerable variability across varying trophic state levels(TSLs).Fluorescence components C1-C3 and C5,fluorescence index(FI),and absorption at 254 nm(α_(254)),increased as TSL increased,while the DOM spectral slope(SR)decreased.COD_(Mn)was positively and significantly correlated with fluorescence components C1-C3 and C5,freshness index(β/α),autochthonous index(BIX),humification index(HIX),α_(254),the ratio ofα_(250)toα_(365)(E2/E3)while being negatively correlated with SR.Parametersα_(254),C1,C3,C4,FI,β/α,and HIX were identified as key predictors of COD_(Mn).The multiple linear regression model successfully predicted COD_(Mn)(r^(2)=0.63,p<0.01,n=1113)and demonstrated superior performance in mesotrophic lakes.These findings highlight the potential for establishing high-frequency,continuous,and multi-regional COD monitoring programs.展开更多
In this study,we investigated improving the performance of a layered double hydroxide(LDH)for the adsorption of As(III)and As(V)by controlling the morphology of LDH crystals.The LDH was synthesized via a simple coprec...In this study,we investigated improving the performance of a layered double hydroxide(LDH)for the adsorption of As(III)and As(V)by controlling the morphology of LDH crystals.The LDH was synthesized via a simple coprecipitation method using barely soluble MgO as a precursor and succinic acid(SA)as a morphological control agent.Doping the LDH crystals with carboxylate ions(RCOO−)derived from SA caused the crystals to develop in a radial direction.This changed the pore characteristics and increased the density of active surface sites.Subsequently,SA/MgFe-LDH showed excellent affinity for As(III)and As(V)with maximum sorption densities of 2.42 and 1.60 mmol/g,respectively.By comparison,the pristine MgFe-LDH had sorption capacities of 1.56 and 1.31 mmol/g for As(III)and As(V),respectively.The LDH was effective over a wide pH range for As(III)adsorption(pH 3-8.5)and As(V)adsorption(pH 3-6.5).Using a combination of spectroscopy and sorption modeling calculations,the main sorption mechanism of As(III)and As(V)on SA/MgFe-LDH was identified as inner-sphere complexation via ligand exchangewith hydroxyl group(-OH)and RCOO−.Specifically,bidentate As-Fe complexeswere proposed for both As(III)and As(V)uptake,with the magnitude of formation varying with the initial As concentration.Importantly,the As-laden adsorbent had satisfactory stability in simulated real landfill leachate.These findings demonstrate that SA/MgFe-LDH exhibits considerable potential for remediation of As-contaminated water.展开更多
Heterogeneous manufacturing is a topic that continues to receive attention.As an emerging manufacturing technology,additive manufacturing can provide strong technical support for heterogeneous manufacturing.In this st...Heterogeneous manufacturing is a topic that continues to receive attention.As an emerging manufacturing technology,additive manufacturing can provide strong technical support for heterogeneous manufacturing.In this study,both homogeneous and heterogeneous composite tubular bionic components were fabricated based on the cold metal transition technology,and the influence of deposition current on the microstructure and mechanical properties of the components was studied.The results show that the interface of the as-deposited heterogeneous composite component is well bonded,and there is an obvious mechanical interlocking structure.The compressive yield strength and elongation of the heterogeneous composite components are higher than those of the homogeneous components,and are positively correlated with the deposition current.Due to the fluctuation of element content,there are a large number of fine grain structures at the interface of the heterogeneous composite components,which increases the mechanical properties.展开更多
This work aims to compare the chemical composition and anti-inflammatory effects on RAW264.7 macrophages of Keemun black tea stems and leaves.A total of 50 volatile compounds were identified in tea stems and leaves,an...This work aims to compare the chemical composition and anti-inflammatory effects on RAW264.7 macrophages of Keemun black tea stems and leaves.A total of 50 volatile compounds were identified in tea stems and leaves,and aldehydes,alcohols,and esters were the main volatile compound categories.There were 11 key volatile compounds,including geraniol,benzeneacetaldehyde,methyl salicylate,linalool,etc.contributed to distinguishing the tea stems from the tea leaves.In the quantitative and liquid chromatography-mass spectrometry(LC-MS)-based metabolomics analysis,higher contents of amino acids,monosaccharides,and quinic acids were found in stems than those in leaves.Inversely,higher contents of tea pigments,flavan-3-ols,gallic acid,purine alkaloids,and flavonol glycosides were present in tea leaves than in stems.LC-MS-based metabolomics also revealed that organic acids were the most critical non-volatile compounds responsible for the differences between tea stems and leaves.Furthermore,tea stems had better inhibiting effects of pro-inflammatory cytokines(interleukin(IL)-1βand IL-6)in lipopolysaccharide-challenged RAW264.7 macrophages than tea leaves,while no significant differences exist between leaves and stems for inhibiting the secretion of tumor necrosis factorα(TNF-α)and NO.In conclusion,our results support using Keemun black tea stems as a novel source of anti-inflammatory compounds.展开更多
Polymers of intrinsic microporosity(PIMs)have received considerable attention for making high-performance membranes for carbon dioxide separation over the last two decades,owing to their highly permeable porous struct...Polymers of intrinsic microporosity(PIMs)have received considerable attention for making high-performance membranes for carbon dioxide separation over the last two decades,owing to their highly permeable porous structures.However,challenges regarding its relatively low selectivity,physical aging,and plasticisation impede relevant industrial adoptions for gas separation.To address these issues,several strategies including chain modification,post-modification,blending with other polymers,and the addition of fillers,have been developed and explored.PIM-1 is the most investigated PIMs,and hence here we review the stateof-the-arts of the modification strategies of PIM-1 critically and discuss the progress achieved for addressing the aforementioned challenges via meta-analysis.Additionally,the development of PIM-1-based thin film composite membranes is commented as well,shedding light on their potential in industrial gas separation.We hope that the review can be a timely snapshot of the relevant state-of-the-arts of PIMs guiding future design and optimisation of PIMs-based membranes for enhanced performance towards a higher technology readiness level for practical applications.展开更多
There are limited biosecurity measures directed at preventing airborne transmission of viruses in swine.The effectiveness of dust mitigation strategies such as oil sprinkling,to decrease risk of airborne virus transmi...There are limited biosecurity measures directed at preventing airborne transmission of viruses in swine.The effectiveness of dust mitigation strategies such as oil sprinkling,to decrease risk of airborne virus transmission are unknown.Metagenomics and qPCR for common fecal viruses were used to hunt for a ubiquitous virus to serve as a proxy when evaluating the efficiency of mitigation strategies against airborne viral infectious agents.Air particles were collected from swine buildings using high-volume air samplers.Extracted DNA and RNA were used to perform specific RT-qPCR and qPCR and analyzed by highthroughput sequencing.Porcine astroviruses group 2 were common(from 102 to 105 genomic copies per cubic meter of air or gc/m^(3),93%positivity)while no norovirus genogroup II was recovered from air samples.Porcine torque teno sus virus were detected by qPCR in low concentrations(from 101 to 102 gc/m^(3),47%positivity).Among the identified viral families by metagenomics analysis,Herelleviridae,Microviridae,Myoviridae,Podoviridae,and Siphoviridae were dominant.The phage vB_AviM_AVP of Aerococcus was present in all air samples and a newly designed qPCR revealed between 101 and 105 gc/m^(3) among the samples taken for the present study(97%positivity)and banked samples from5-and 15-year old studies(89%positivity).According to the present study,both the porcine astrovirus group 2 and the phage vB_AviM_AVP of Aerococcus could be proxy for airborne viruses of swine buildings.展开更多
Polycaprolactone(PCL)scaffolds that are produced through additive manufacturing are one of the most researched bone tissue engineering structures in the field.Due to the intrinsic limitations of PCL,carbon nanomateria...Polycaprolactone(PCL)scaffolds that are produced through additive manufacturing are one of the most researched bone tissue engineering structures in the field.Due to the intrinsic limitations of PCL,carbon nanomaterials are often investigated to reinforce the PCL scaffolds.Despite several studies that have been conducted on carbon nanomaterials,such as graphene(G)and graphene oxide(GO),certain challenges remain in terms of the precise design of the biological and nonbiological properties of the scaffolds.This paper addresses this limitation by investigating both the nonbiological(element composition,surface,degradation,and thermal and mechanical properties)and biological characteristics of carbon nanomaterial-reinforced PCL scaffolds for bone tissue engineering applications.Results showed that the incorporation of G and GO increased surface properties(reduced modulus and wettability),material crystallinity,crystallization temperature,and degradation rate.However,the variations in compressive modulus,strength,surface hardness,and cell metabolic activity strongly depended on the type of reinforcement.Finally,a series of phenomenological models were developed based on experimental results to describe the variations of scaffold’s weight,fiber diameter,porosity,and mechanical properties as functions of degradation time and carbon nanomaterial concentrations.The results presented in this paper enable the design of three-dimensional(3D)bone scaffolds with tuned properties by adjusting the type and concentration of different functional fillers.展开更多
Different proportions of commercial 2024 aluminum alloy powder and FeNiCrCoA13 high entropy alloy （HEA） powder were ball-milled （BM） for different time. The powder was consolidated by hot extrusion method. The mic...Different proportions of commercial 2024 aluminum alloy powder and FeNiCrCoA13 high entropy alloy （HEA） powder were ball-milled （BM） for different time. The powder was consolidated by hot extrusion method. The microstructures of the milled powder and bulk alloy were examined by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. Mechanical properties of the extruded alloy were examined by mechanical testing machine. The results show that after BM, the particle size and microstructures of the mixed alloy powder change obviously. After 48 h BM, the average size of mixed powder is about 30 nm, and then after hot extrusion, the average size of grains reaches about 70 rim. The compressive strength of the extruded alloy reaches 710 MPa under certain conditions of milling time and composition. As a result of the identification of the nano-/micro-strueture-property relationship of the samples, such high strength is attributed mainly to the nanocrystalline grains of a（Al） and nanoscaled FeNiCrCoAl3 particles, and the fine secondary phase of Al2Cu and Fe-rich phases.展开更多
Al86Ni7Y4.5Co1La1.5 （mole fraction, %） alloy powder was produced by argon gas atomization process. After high-energy ball milling, the powder was consolidated by vacuum hot press sintering and spark plasma sintering...Al86Ni7Y4.5Co1La1.5 （mole fraction, %） alloy powder was produced by argon gas atomization process. After high-energy ball milling, the powder was consolidated by vacuum hot press sintering and spark plasma sintering （SPS） under different process conditions. The microstructure and morphology of the powder and consolidated bulk sample were examined by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. It is shown that amorphous phase appears when ball milling time is more than 100 h, and the bulk sample consolidated by SPS can maintain amorphous/ nanocrystalline microstructure but has lower relative density. A compressive strength of 650 MPa of Al86Ni7Y4.5Co1La1.5 nanostructured samples is achieved by vacuum hot extrusion （VHE）.展开更多
Carbon nanotubes （CNTs） reinforced aluminum matrix composites were fabricated by mechanical milling followed by hot extrusion. The commercial Al-2024 alloy with 1% CNTs was milled under various ball milling conditio...Carbon nanotubes （CNTs） reinforced aluminum matrix composites were fabricated by mechanical milling followed by hot extrusion. The commercial Al-2024 alloy with 1% CNTs was milled under various ball milling conditions. Microstructure evolution and mechanical properties of the milled powder and consolidated bulk materials were examined by X-ray diffraction （XRD）, field emission scanning electron microscopy （FESEM） and mechanical test. The effect of CNTs concentration and milling time on the microstructure of the CNTs/Al-2024 composites was studied. Based on the structural observation, the formation behavior of nanostructure in ball milled powder was discussed. The results show that the increment in the milling time and ration speed, for a fixed amount of CNTs, causes a reduction of the particle size of powders resulting from MM. The finest particle size was obtained after 15 h of milling. Moreover, the composite had an increase in tensile strength due to the small amount of CNTs addition.展开更多
Mine tailings, waste rock piles, acid mine drainage, industrial wastewater, and sewage sludge have contaminated a vast area of cultivable and fallow lands, with a consequence of deterioration of soil and water quality...Mine tailings, waste rock piles, acid mine drainage, industrial wastewater, and sewage sludge have contaminated a vast area of cultivable and fallow lands, with a consequence of deterioration of soil and water quality and watercourses due to the erosion of contaminated soils for absence of vegetative cover. High concentrations of toxic elements, organic contaminants, acidic soils, and harsh climatic conditions have made it difficult to re-establish vegetation and produce crops there. Recently, a significant body of work has focussed on the suitability and potentiality of biochar as a soil remediation tool that increases seed emergence, soil and crop productivity, above ground biomass, and vegetation cover on mine tailings, waste rock piles, and industrial and sewage waste- contaminated soils by increasing soil nutrients and water-holding capacity, amelioration of soil acidity, and stimulation of microbial diversity and functions. This review addresses： i） the functional properties of biochar, and microbial cycling of nutrients in soil; ii） bioremediation, especially phytoremediation of mine railings, industrial waste, sewage sludge, and contaminated soil using biochar; iii） impact of biochar on reduction of acid production, acid mine drainage treatment, and geochemical dynamics in mine railings; and iv） treatment of metal and organic contaminants in soils using biochar, and restoration of degraded land.展开更多
A fundamental aspect of society is the exchange and discussion of opinions between individuals, occurring in situations as varied as company boardrooms, elementary school classrooms and online social media. After a ve...A fundamental aspect of society is the exchange and discussion of opinions between individuals, occurring in situations as varied as company boardrooms, elementary school classrooms and online social media. After a very brief introduction to the established results of the most fundamental opinion dynamics models, which seek to mathematically capture observed social phenomena, a brief discussion follows on several recent themes pursued by the authors building on the fundamental ideas. In the first theme, we study the way an individual′s self-confidence can develop through contributing to discussions on a sequence of topics, reaching a consensus in each case,where the consensus value to some degree reflects the contribution of that individual to the conclusion. During this process, the individuals in the network and the way they interact can change. The second theme introduces a novel discrete-time model of opinion dynamics to study how discrepancies between an individual′s expressed and private opinions can arise due to stubbornness and a pressure to conform to a social norm. It is also shown that a few extremists can create "pluralistic ignorance", where people believe there is majority support for a position but in fact the position is privately rejected by the majority. Last, we consider a group of individuals discussing a collection of logically related topics. In particular, we identify that for topics whose logical interdependencies take on a cascade structure,disagreement in opinions can occur if individuals have competing and/or heterogeneous views on how the topics are related, i.e., the logical interdependence structure varies between individuals.展开更多
Lithium-sulfur(Li-S)batteries,although a promising candidate of next-generation energy storage devices,are hindered by some bottlenecks in their roadmap toward commercialization.The key challenges include solving the ...Lithium-sulfur(Li-S)batteries,although a promising candidate of next-generation energy storage devices,are hindered by some bottlenecks in their roadmap toward commercialization.The key challenges include solving the issues such as low utilization of active materials,poor cyclic stability,poor rate performance,and unsatisfactory Coulombic efficiency due to the inherent poor electrical and ionic conductivity of sulfur and its discharged products(e.g.,Li2S2 and Li_(2)S),dissolution and migration of polysulfide ions in the electrolyte,unstable solid electrolyte interphase and dendritic growth on an odes,and volume change in both cathodes and anodes.Owing to the high specific surface area,pore volume,low density,good chemical stability,and particularly multimodal pore sizes,hierarchical porous carbon(HPC)mate rials have received considerable attention for circumventing the above pro blems in Li-S batteries.Herein,recent progress made in the synthetic methods and deployment of HPC materials for various components including sulfur cathodes,separators and interlayers,and lithium anodes in Li-S batteries is presented and summarized.More importantly,the correlation between the structures(pore volume,specific surface area,degree of pores,and heteroatom-doping)of HPC and the electrochemical performances of Li-S batteries is elaborated.Finally,a discussion on the challenges and future perspectives associated with HPCs for Li-S batteries is provided.展开更多
To test the influence of binder strength, porous concretes with 4 binder strengths between 30.0-135.0 MPa and 5 void ratios between 15%-35% were tested. The results indicated that for the same aggregate, the rates of ...To test the influence of binder strength, porous concretes with 4 binder strengths between 30.0-135.0 MPa and 5 void ratios between 15%-35% were tested. The results indicated that for the same aggregate, the rates of strength reduction due to the increases in void ratio were the same for binders with different strengths. To study the influence of aggregate size, 3 single size aggregates with nominal sizes of 5.0, 13.0 and 20.0 mm （Nos. 7, 6 and 5 according to JIS A 5001） were used to make porous concrete. The strengths of porous concrete are found to be dependent on aggregate size. The rate of strength reduction of porous concrete with small aggregate size is found to be higher than that with larger aggregate size. At the same void ratio, the strength of porous concrete with large aggregate is larger than that with small aggregate. The general equations for porous concrete are related to compressive strength and void ratio for different binder strengths and aggregate sizes.展开更多
To investigate the potential effects of wastewater sludge and sludge biochar on growth, yield and metal bioaccumulation of cherry tomato （Lycopersicon esculentum L.）, a pot experiment was carried out under greenhous...To investigate the potential effects of wastewater sludge and sludge biochar on growth, yield and metal bioaccumulation of cherry tomato （Lycopersicon esculentum L.）, a pot experiment was carried out under greenhouse environment with three different treatments, control soil （CP）, soil with wastewater sludge （SS） and soil with sludge biochar （SB）, to reveal the comparative effect between the amendments of wastewater sludge and sludge biochar. The soil used for pot experiment was Chromosol. Wastewater sludge and sludge biochax produced through pyrolysis process at 550 ℃ were applied at 10 t ha-1. No significant difference was found in growth and production of cherry tomatoes between wastewater sludge and sludge biochar applications to the soil. The accumulation rates of metals in the fruits were lower in the treatment with sludge biochar than in the treatment with wastewater sludge. The study highlights the benefits of risk mitigation from toxic metal accumulation in fruits using wastewater sludge and sludge biochar as soil conditioners.展开更多
Metal organic frameworks(MOFs) represent a class of porous material which is formed by strong bonds between metal ions and organic linkers. By careful selection of constituents, MOFs can exhibit very high surface area...Metal organic frameworks(MOFs) represent a class of porous material which is formed by strong bonds between metal ions and organic linkers. By careful selection of constituents, MOFs can exhibit very high surface area, large pore volume, and excellent chemical stability.Research on synthesis, structures and properties of various MOFs has shown that they are promising materials for many applications, such as energy storage, gas storage, heterogeneous catalysis and sensing. Apart from direct use, MOFs have also been used as support substrates for nanomaterials or as sacrificial templates/precursors for preparation of various functional nanostructures. In this review, we aim to present the most recent development of MOFs as precursors for the preparation of various nanostructures and their potential applications in energy-related devices and processes. Specifically, this present survey intends to push the boundaries and covers the literatures from the year 2013 to early 2017,on supercapacitors, lithium ion batteries, electrocatalysts, photocatalyst, gas sensing, water treatment, solar cells, and carbon dioxide capture.Finally, an outlook in terms of future challenges and potential prospects towards industrial applications are also discussed.展开更多
基金supported by the Natural Science Foundation of Hubei Provincial Department of Education(D20232101)Shandong Second Medical University 2024 Affiliated Hospital(Teaching Hospital)Scientific Research Development Fund Project(2024FYQ026)+3 种基金the innovative Research Programme of Xiangyang No.1 People’s Hospital(XYY2023ZY01)Faculty Development Grants of Xiangyang No.1 People’s Hospital Affiliated to Hubei University of Medicine(XYY2023D05)Joint supported by Hubei Provincial Natural Science Foundation and Xiangyang of China(2025AFD091)Traditional Chinese Medicine Scientific Research Project of Hubei Provincial Administration of Traditional Chinese Medicine(ZY2025D019).
文摘Background:Diabetic foot,a severe complication of diabetes,is characterized by chronic refractory wounds.Sanhuang Oil,a topical herbal formula,demonstrates significant therapeutic effects including antibacterial,anti-inflammatory,and immunomodulatory activities.However,its active constituents and mechanisms of action against diabetic foot remain to be elucidated.Methods:In this study,the chemical constituents of Sanhuang Oil were identified using UPLC-QE-Orbitrap-MS.Subsequently,the mechanism by which Sanhuang Oil promotes diabetic foot ulcer healing was predicted by integrating network pharmacology and molecular docking.Additionally,diabetic mouse model was established in ICR mice using a combination of a high-fat diet(HFD)and streptozotocin(STZ)chemical induction.A full-thickness skin defect was created on the dorsum of the mice.Wound healing and the healing rate were observed following Sanhuang Oil intervention.The mechanism underlying Sanhuang Oil’s promotion of diabetic ulcer healing was further investigated using transcriptomics and histopathological examination(H&E staining).Results:A total of 97 active ingredients were identified from Sanhuang Oil.Network pharmacology analysis predicted 543 common targets,and Kyoto Encyclopedia of Genes and Genomes(KEGG)pathway enrichment analysis identified 203 relevant pathways.Molecular docking further confirmed high binding affinity(binding energy≤−5.0 kcal/mol)between specific active components in Sanhuang Oil(e.g.,coptisine,phellodendrine,baicalein)and key targets associated with diabetic foot ulcers(e.g.,EGFR,AKT1,STAT3).In vivo experimental results demonstrated that the wound healing rate was significantly higher in Sanhuang Oil-treated groups compared to the model group(P<0.001).HE staining revealed that the high-dose Sanhuang Oil group exhibited more pronounced epithelial tissue coverage over the wound,reduced inflammatory cell infiltration,and increased collagen deposition and fibroblast proliferation.transcriptomic analysis identified Pdk4,Ttn,Csrp3,Actn2,Myoz2,Tnnc2,Myod1,Myog,Myot,and Myf6 as key regulatory proteins involved in promoting wound healing.Conclusion:Sanhuang Oil promotes wound healing in diabetic ulcer mice,potentially by mitigating inflammation and regulating key targets such as Pdk4 to enhance fibroblast function.These findings provide novel insights into the multi-target,multi-pathway mechanism of Sanhuang Oil for treating diabetic foot ulcers.
基金supported by National Nature Science Foundation of China(No.62361036)Nature Science Foundation of Gansu Province(No.22JR5RA279).
文摘To realize dynamic statistical publishing and protection of location-based data privacy,this paper proposes a differential privacy publishing algorithm based on adaptive sampling and grid clustering and adjustment.The PID control strategy is combined with the difference in data variation to realize the dynamic adjustment of the data publishing intervals.The spatial-temporal correlations of the adjacent snapshots are utilized to design the grid clustering and adjustment algorithm,which facilitates saving the execution time of the publishing process.The budget distribution and budget absorption strategies are improved to form the sliding window-based differential privacy statistical publishing algorithm,which realizes continuous statistical publishing and privacy protection and improves the accuracy of published data.Experiments and analysis on large datasets of actual locations show that the privacy protection algorithm proposed in this paper is superior to other existing algorithms in terms of the accuracy of adaptive sampling time,the availability of published data,and the execution efficiency of data publishing methods.
基金supported by the National Natural Science Foundation of China(22378285,92475117 and U21A20303)。
文摘Electrochemically switched ion exchange(ESIX)is an effective technology for extracting high-valueadded ions from dilute solutions.This study focuses on Li^(+)extraction by employing a comprehensive model to analyze interaction between fluidic dynamics,electric field and ion transport.The model combines Butler-Volmer equation modified by electroactive site concentration,Nernst-Planck equation and Navier-Stokes equation.It is found that the chamber width affects solution phase resistance,thereby altering the pote ntial distribution and influencing the current distribution within the membrane.A narrow chamber increases current density in the solid phase of the membrane,enhancing Li^(+) extraction.The solution flow-field not only enhances convective transport but also increases the current density in the solid phase,promoting Li^(+) extraction.There is a synergistic effect between fluid-flow-field and electric-field for ion separation,which is only significant when the chamber width is greater than 2 mm.The synergistic mechanism differs from that in the capacitive deionization system.Therefore,the performance decline caused by a wide chamber can be compensated for by increasing the fluid-flow rate,utilizing the synergistic effect between the flu id-flow-field and electric-field to optimize the lithium extraction efficiency in the ESIX system.
基金supported by the NSFC under Grant Nos.11374315 and 12074395the Invited Scientist Program of CNRS at Ecole Polytechnique,Palaiseau,France。
文摘The capacity to predict X-ray transition and K-edge energies in dense finite-temperatur plasmas with high precision is of primary importance for atomic physics of matter under extreme conditions.The dual characteristics of bound and continuum states in dense matter are modeled by a valence-band-like structure in a generalized ion-sphere approach with states that are either bound,free,or mixed.The self-consistent combination of this model with the Dirac wave equations of multielectron bound states allows one to fully respect the Pauli principle and to take into account the exact nonlocal exchange terms.The generalized method allows very high precision without implication of calibration shifts and scaling parameters and therefore has predictive power.This leads to new insights in the analysis of various data.The simple ionization model representing the K-edge is generalized to excitation–ionization phenomena resulting in an advanced interpretation of ionization depression data in near-solid-density plasmas.The model predicts scaling relations along the isoelectronic sequences and the existence of bound M-states that are in excellent agreement with experimental data,whereas other methods have failed.The application to unexplained data from compound materials also gives good agreement without the need to invoke any additional assumptions in the generalized model,whereas other methods have lacked consistency.
基金This study was funded by Wuhan Institute of Technology(Grant Nos.24QD26,21QD02,22QD64)National Natural Science Foundation of China(Grant No.32102823).
文摘Aiming to control lake eutrophication,proposed methods for convenient and faithworthy lake water quality evaluation are warranted.Optical measurement of dissolved organic matter(DOM)demonstrates great potential for estimating organic matter(OM)composition,and can thus serve as a proxy for conventional chemical oxygen demand(COD_(Mn))measurements,which are considered as imprecise and environmentally unfriendly.Hence,we conducted a field campaign across 30 lakes in Wuhan's metropolitan area,collecting 255 samples from varying trophic states to evaluate the predictive capability of COD_(Mn)using DOM optical measurements combined with parallel factor(PARAFAC)analysis.The DOM optical properties and chemical composition exhibited considerable variability across varying trophic state levels(TSLs).Fluorescence components C1-C3 and C5,fluorescence index(FI),and absorption at 254 nm(α_(254)),increased as TSL increased,while the DOM spectral slope(SR)decreased.COD_(Mn)was positively and significantly correlated with fluorescence components C1-C3 and C5,freshness index(β/α),autochthonous index(BIX),humification index(HIX),α_(254),the ratio ofα_(250)toα_(365)(E2/E3)while being negatively correlated with SR.Parametersα_(254),C1,C3,C4,FI,β/α,and HIX were identified as key predictors of COD_(Mn).The multiple linear regression model successfully predicted COD_(Mn)(r^(2)=0.63,p<0.01,n=1113)and demonstrated superior performance in mesotrophic lakes.These findings highlight the potential for establishing high-frequency,continuous,and multi-regional COD monitoring programs.
文摘In this study,we investigated improving the performance of a layered double hydroxide(LDH)for the adsorption of As(III)and As(V)by controlling the morphology of LDH crystals.The LDH was synthesized via a simple coprecipitation method using barely soluble MgO as a precursor and succinic acid(SA)as a morphological control agent.Doping the LDH crystals with carboxylate ions(RCOO−)derived from SA caused the crystals to develop in a radial direction.This changed the pore characteristics and increased the density of active surface sites.Subsequently,SA/MgFe-LDH showed excellent affinity for As(III)and As(V)with maximum sorption densities of 2.42 and 1.60 mmol/g,respectively.By comparison,the pristine MgFe-LDH had sorption capacities of 1.56 and 1.31 mmol/g for As(III)and As(V),respectively.The LDH was effective over a wide pH range for As(III)adsorption(pH 3-8.5)and As(V)adsorption(pH 3-6.5).Using a combination of spectroscopy and sorption modeling calculations,the main sorption mechanism of As(III)and As(V)on SA/MgFe-LDH was identified as inner-sphere complexation via ligand exchangewith hydroxyl group(-OH)and RCOO−.Specifically,bidentate As-Fe complexeswere proposed for both As(III)and As(V)uptake,with the magnitude of formation varying with the initial As concentration.Importantly,the As-laden adsorbent had satisfactory stability in simulated real landfill leachate.These findings demonstrate that SA/MgFe-LDH exhibits considerable potential for remediation of As-contaminated water.
基金supported by the National Natural Science Foundation of China(52375372)the National Key Laboratory of Particle Transport and Separation Technology(KWKF-2024-3).
文摘Heterogeneous manufacturing is a topic that continues to receive attention.As an emerging manufacturing technology,additive manufacturing can provide strong technical support for heterogeneous manufacturing.In this study,both homogeneous and heterogeneous composite tubular bionic components were fabricated based on the cold metal transition technology,and the influence of deposition current on the microstructure and mechanical properties of the components was studied.The results show that the interface of the as-deposited heterogeneous composite component is well bonded,and there is an obvious mechanical interlocking structure.The compressive yield strength and elongation of the heterogeneous composite components are higher than those of the homogeneous components,and are positively correlated with the deposition current.Due to the fluctuation of element content,there are a large number of fine grain structures at the interface of the heterogeneous composite components,which increases the mechanical properties.
基金supported by the Natural Science Foundation of China(32122079,32072633)Earmarked Fund for China Agriculture Research System(CARS-19)+2 种基金Anhui Key Research and Development Plan(202104b11020001)Young Elite Scientist Sponsorship Program by National CAST(2016QNRC001)High-level Introduced Talent Sponsorship Program by Anhui Agricultural University(rc352203)。
文摘This work aims to compare the chemical composition and anti-inflammatory effects on RAW264.7 macrophages of Keemun black tea stems and leaves.A total of 50 volatile compounds were identified in tea stems and leaves,and aldehydes,alcohols,and esters were the main volatile compound categories.There were 11 key volatile compounds,including geraniol,benzeneacetaldehyde,methyl salicylate,linalool,etc.contributed to distinguishing the tea stems from the tea leaves.In the quantitative and liquid chromatography-mass spectrometry(LC-MS)-based metabolomics analysis,higher contents of amino acids,monosaccharides,and quinic acids were found in stems than those in leaves.Inversely,higher contents of tea pigments,flavan-3-ols,gallic acid,purine alkaloids,and flavonol glycosides were present in tea leaves than in stems.LC-MS-based metabolomics also revealed that organic acids were the most critical non-volatile compounds responsible for the differences between tea stems and leaves.Furthermore,tea stems had better inhibiting effects of pro-inflammatory cytokines(interleukin(IL)-1βand IL-6)in lipopolysaccharide-challenged RAW264.7 macrophages than tea leaves,while no significant differences exist between leaves and stems for inhibiting the secretion of tumor necrosis factorα(TNF-α)and NO.In conclusion,our results support using Keemun black tea stems as a novel source of anti-inflammatory compounds.
基金funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 872102the China Scholarship Council(CSC,file no.202006240076)-University of Manchester joint studentship for supporting the PhD researchthe special innovation project fund from the Institute of Wenzhou,Zhejiang University(No.XMGL-KJZX-202204)。
文摘Polymers of intrinsic microporosity(PIMs)have received considerable attention for making high-performance membranes for carbon dioxide separation over the last two decades,owing to their highly permeable porous structures.However,challenges regarding its relatively low selectivity,physical aging,and plasticisation impede relevant industrial adoptions for gas separation.To address these issues,several strategies including chain modification,post-modification,blending with other polymers,and the addition of fillers,have been developed and explored.PIM-1 is the most investigated PIMs,and hence here we review the stateof-the-arts of the modification strategies of PIM-1 critically and discuss the progress achieved for addressing the aforementioned challenges via meta-analysis.Additionally,the development of PIM-1-based thin film composite membranes is commented as well,shedding light on their potential in industrial gas separation.We hope that the review can be a timely snapshot of the relevant state-of-the-arts of PIMs guiding future design and optimisation of PIMs-based membranes for enhanced performance towards a higher technology readiness level for practical applications.
文摘There are limited biosecurity measures directed at preventing airborne transmission of viruses in swine.The effectiveness of dust mitigation strategies such as oil sprinkling,to decrease risk of airborne virus transmission are unknown.Metagenomics and qPCR for common fecal viruses were used to hunt for a ubiquitous virus to serve as a proxy when evaluating the efficiency of mitigation strategies against airborne viral infectious agents.Air particles were collected from swine buildings using high-volume air samplers.Extracted DNA and RNA were used to perform specific RT-qPCR and qPCR and analyzed by highthroughput sequencing.Porcine astroviruses group 2 were common(from 102 to 105 genomic copies per cubic meter of air or gc/m^(3),93%positivity)while no norovirus genogroup II was recovered from air samples.Porcine torque teno sus virus were detected by qPCR in low concentrations(from 101 to 102 gc/m^(3),47%positivity).Among the identified viral families by metagenomics analysis,Herelleviridae,Microviridae,Myoviridae,Podoviridae,and Siphoviridae were dominant.The phage vB_AviM_AVP of Aerococcus was present in all air samples and a newly designed qPCR revealed between 101 and 105 gc/m^(3) among the samples taken for the present study(97%positivity)and banked samples from5-and 15-year old studies(89%positivity).According to the present study,both the porcine astrovirus group 2 and the phage vB_AviM_AVP of Aerococcus could be proxy for airborne viruses of swine buildings.
基金The authors wish to acknowledge Engineering and Physical Sciences Research Council(EPSRC)UK for the Global Challenges Research Fund(No.EP/R015139/1)Rosetrees Trust UK&Stoneygate Trust UK for the Enterprise Fellowship(Ref:M874).
文摘Polycaprolactone(PCL)scaffolds that are produced through additive manufacturing are one of the most researched bone tissue engineering structures in the field.Due to the intrinsic limitations of PCL,carbon nanomaterials are often investigated to reinforce the PCL scaffolds.Despite several studies that have been conducted on carbon nanomaterials,such as graphene(G)and graphene oxide(GO),certain challenges remain in terms of the precise design of the biological and nonbiological properties of the scaffolds.This paper addresses this limitation by investigating both the nonbiological(element composition,surface,degradation,and thermal and mechanical properties)and biological characteristics of carbon nanomaterial-reinforced PCL scaffolds for bone tissue engineering applications.Results showed that the incorporation of G and GO increased surface properties(reduced modulus and wettability),material crystallinity,crystallization temperature,and degradation rate.However,the variations in compressive modulus,strength,surface hardness,and cell metabolic activity strongly depended on the type of reinforcement.Finally,a series of phenomenological models were developed based on experimental results to describe the variations of scaffold’s weight,fiber diameter,porosity,and mechanical properties as functions of degradation time and carbon nanomaterial concentrations.The results presented in this paper enable the design of three-dimensional(3D)bone scaffolds with tuned properties by adjusting the type and concentration of different functional fillers.
基金Project(2012CB619503)supported by the Nation Basic Research Program of ChinaProject(2013AA031001)supported by the National High Technology Research and Development Program of ChinaProject(2012DFA50630)supported by the International Science&Technology Cooperation Program of China
文摘Different proportions of commercial 2024 aluminum alloy powder and FeNiCrCoA13 high entropy alloy （HEA） powder were ball-milled （BM） for different time. The powder was consolidated by hot extrusion method. The microstructures of the milled powder and bulk alloy were examined by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. Mechanical properties of the extruded alloy were examined by mechanical testing machine. The results show that after BM, the particle size and microstructures of the mixed alloy powder change obviously. After 48 h BM, the average size of mixed powder is about 30 nm, and then after hot extrusion, the average size of grains reaches about 70 rim. The compressive strength of the extruded alloy reaches 710 MPa under certain conditions of milling time and composition. As a result of the identification of the nano-/micro-strueture-property relationship of the samples, such high strength is attributed mainly to the nanocrystalline grains of a（Al） and nanoscaled FeNiCrCoAl3 particles, and the fine secondary phase of Al2Cu and Fe-rich phases.
基金Project(2012CB619503)supported by the National Basic Research Program of ChinaProject(2013AA031001)supported by the National High Technology Research and Development Program of ChinaProject(2012DFA50630)supported by the International Science&Technology Cooperation Program of China
文摘Al86Ni7Y4.5Co1La1.5 （mole fraction, %） alloy powder was produced by argon gas atomization process. After high-energy ball milling, the powder was consolidated by vacuum hot press sintering and spark plasma sintering （SPS） under different process conditions. The microstructure and morphology of the powder and consolidated bulk sample were examined by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. It is shown that amorphous phase appears when ball milling time is more than 100 h, and the bulk sample consolidated by SPS can maintain amorphous/ nanocrystalline microstructure but has lower relative density. A compressive strength of 650 MPa of Al86Ni7Y4.5Co1La1.5 nanostructured samples is achieved by vacuum hot extrusion （VHE）.
基金Project(2012CB619503)supported by the National Basic Research Program of ChinaProject(2013AA031001)supported by the National High-tech Research and Development Program of ChinaProject(2012DFA50630)supported by the International Science&Technology Cooperation Program of China
文摘Carbon nanotubes （CNTs） reinforced aluminum matrix composites were fabricated by mechanical milling followed by hot extrusion. The commercial Al-2024 alloy with 1% CNTs was milled under various ball milling conditions. Microstructure evolution and mechanical properties of the milled powder and consolidated bulk materials were examined by X-ray diffraction （XRD）, field emission scanning electron microscopy （FESEM） and mechanical test. The effect of CNTs concentration and milling time on the microstructure of the CNTs/Al-2024 composites was studied. Based on the structural observation, the formation behavior of nanostructure in ball milled powder was discussed. The results show that the increment in the milling time and ration speed, for a fixed amount of CNTs, causes a reduction of the particle size of powders resulting from MM. The finest particle size was obtained after 15 h of milling. Moreover, the composite had an increase in tensile strength due to the small amount of CNTs addition.
文摘Mine tailings, waste rock piles, acid mine drainage, industrial wastewater, and sewage sludge have contaminated a vast area of cultivable and fallow lands, with a consequence of deterioration of soil and water quality and watercourses due to the erosion of contaminated soils for absence of vegetative cover. High concentrations of toxic elements, organic contaminants, acidic soils, and harsh climatic conditions have made it difficult to re-establish vegetation and produce crops there. Recently, a significant body of work has focussed on the suitability and potentiality of biochar as a soil remediation tool that increases seed emergence, soil and crop productivity, above ground biomass, and vegetation cover on mine tailings, waste rock piles, and industrial and sewage waste- contaminated soils by increasing soil nutrients and water-holding capacity, amelioration of soil acidity, and stimulation of microbial diversity and functions. This review addresses： i） the functional properties of biochar, and microbial cycling of nutrients in soil; ii） bioremediation, especially phytoremediation of mine railings, industrial waste, sewage sludge, and contaminated soil using biochar; iii） impact of biochar on reduction of acid production, acid mine drainage treatment, and geochemical dynamics in mine railings; and iv） treatment of metal and organic contaminants in soils using biochar, and restoration of degraded land.
基金supported by the Australian Research Council (ARC) (No. DP-160104500) and Data61-CSIRO, Australiasupported in part by the European Research Council (No. ERC-CoG-771687)the Netherlands Organization for Scientific Research (No. NWO-vidi-14134)
文摘A fundamental aspect of society is the exchange and discussion of opinions between individuals, occurring in situations as varied as company boardrooms, elementary school classrooms and online social media. After a very brief introduction to the established results of the most fundamental opinion dynamics models, which seek to mathematically capture observed social phenomena, a brief discussion follows on several recent themes pursued by the authors building on the fundamental ideas. In the first theme, we study the way an individual′s self-confidence can develop through contributing to discussions on a sequence of topics, reaching a consensus in each case,where the consensus value to some degree reflects the contribution of that individual to the conclusion. During this process, the individuals in the network and the way they interact can change. The second theme introduces a novel discrete-time model of opinion dynamics to study how discrepancies between an individual′s expressed and private opinions can arise due to stubbornness and a pressure to conform to a social norm. It is also shown that a few extremists can create "pluralistic ignorance", where people believe there is majority support for a position but in fact the position is privately rejected by the majority. Last, we consider a group of individuals discussing a collection of logically related topics. In particular, we identify that for topics whose logical interdependencies take on a cascade structure,disagreement in opinions can occur if individuals have competing and/or heterogeneous views on how the topics are related, i.e., the logical interdependence structure varies between individuals.
基金Yinyu Xiang is very grateful to the China Scholarship Council(CSC:No.201806950083)for his PhD scholarship。
文摘Lithium-sulfur(Li-S)batteries,although a promising candidate of next-generation energy storage devices,are hindered by some bottlenecks in their roadmap toward commercialization.The key challenges include solving the issues such as low utilization of active materials,poor cyclic stability,poor rate performance,and unsatisfactory Coulombic efficiency due to the inherent poor electrical and ionic conductivity of sulfur and its discharged products(e.g.,Li2S2 and Li_(2)S),dissolution and migration of polysulfide ions in the electrolyte,unstable solid electrolyte interphase and dendritic growth on an odes,and volume change in both cathodes and anodes.Owing to the high specific surface area,pore volume,low density,good chemical stability,and particularly multimodal pore sizes,hierarchical porous carbon(HPC)mate rials have received considerable attention for circumventing the above pro blems in Li-S batteries.Herein,recent progress made in the synthetic methods and deployment of HPC materials for various components including sulfur cathodes,separators and interlayers,and lithium anodes in Li-S batteries is presented and summarized.More importantly,the correlation between the structures(pore volume,specific surface area,degree of pores,and heteroatom-doping)of HPC and the electrochemical performances of Li-S batteries is elaborated.Finally,a discussion on the challenges and future perspectives associated with HPCs for Li-S batteries is provided.
文摘To test the influence of binder strength, porous concretes with 4 binder strengths between 30.0-135.0 MPa and 5 void ratios between 15%-35% were tested. The results indicated that for the same aggregate, the rates of strength reduction due to the increases in void ratio were the same for binders with different strengths. To study the influence of aggregate size, 3 single size aggregates with nominal sizes of 5.0, 13.0 and 20.0 mm （Nos. 7, 6 and 5 according to JIS A 5001） were used to make porous concrete. The strengths of porous concrete are found to be dependent on aggregate size. The rate of strength reduction of porous concrete with small aggregate size is found to be higher than that with larger aggregate size. At the same void ratio, the strength of porous concrete with large aggregate is larger than that with small aggregate. The general equations for porous concrete are related to compressive strength and void ratio for different binder strengths and aggregate sizes.
文摘To investigate the potential effects of wastewater sludge and sludge biochar on growth, yield and metal bioaccumulation of cherry tomato （Lycopersicon esculentum L.）, a pot experiment was carried out under greenhouse environment with three different treatments, control soil （CP）, soil with wastewater sludge （SS） and soil with sludge biochar （SB）, to reveal the comparative effect between the amendments of wastewater sludge and sludge biochar. The soil used for pot experiment was Chromosol. Wastewater sludge and sludge biochax produced through pyrolysis process at 550 ℃ were applied at 10 t ha-1. No significant difference was found in growth and production of cherry tomatoes between wastewater sludge and sludge biochar applications to the soil. The accumulation rates of metals in the fruits were lower in the treatment with sludge biochar than in the treatment with wastewater sludge. The study highlights the benefits of risk mitigation from toxic metal accumulation in fruits using wastewater sludge and sludge biochar as soil conditioners.
基金financial support from Ningbo Municipal Government (Innovation Team 2012882011,3315 Plan,2014A35001-1)the EPSRC (EP/J000582/1,GR/R68078)
文摘Metal organic frameworks(MOFs) represent a class of porous material which is formed by strong bonds between metal ions and organic linkers. By careful selection of constituents, MOFs can exhibit very high surface area, large pore volume, and excellent chemical stability.Research on synthesis, structures and properties of various MOFs has shown that they are promising materials for many applications, such as energy storage, gas storage, heterogeneous catalysis and sensing. Apart from direct use, MOFs have also been used as support substrates for nanomaterials or as sacrificial templates/precursors for preparation of various functional nanostructures. In this review, we aim to present the most recent development of MOFs as precursors for the preparation of various nanostructures and their potential applications in energy-related devices and processes. Specifically, this present survey intends to push the boundaries and covers the literatures from the year 2013 to early 2017,on supercapacitors, lithium ion batteries, electrocatalysts, photocatalyst, gas sensing, water treatment, solar cells, and carbon dioxide capture.Finally, an outlook in terms of future challenges and potential prospects towards industrial applications are also discussed.
