High entropy compounds were proven to exhibit excellent catalytic activity.Here,a series of amorphous CrMnFeCoNi Oxy-carbide films were successfully synthesized by one-step electrodeposition.As demonstrated,the film p...High entropy compounds were proven to exhibit excellent catalytic activity.Here,a series of amorphous CrMnFeCoNi Oxy-carbide films were successfully synthesized by one-step electrodeposition.As demonstrated,the film presented superior electrocatalytic activity for oxygen evolution reaction(OER)with an overpotential of 295 mV at a current density of 10 mA/cm^(2).Uniquely,selective dissolution of Chromium(Cr)was observed,which increased the catalytic activity and showed high stability under a large current density of up to 400 mA/cm^(2).Cr dissolution not only increased the surface area but also improved the conductivity due to newly formed metal-metal bonding,promoting electron transfer and improving OER performance.As revealed by density functional theory(DFT)calculations,Cr-dissolution mediates the bonding of OER intermediates over surface active sites and ultimately reduces OER overpotential.The one-step electrodeposition method and the micro-dissolution mechanism provided a potential way to design and prepare high entropy compound electrodes,aiming to achieve efficient water electrolysis.展开更多
Lithium-ion batteries(LIBs)have emerged as the preferred energy storage systems for various types of electric transports,including electric vehicles,electric boats,electric trains,and electric airplanes.The energy man...Lithium-ion batteries(LIBs)have emerged as the preferred energy storage systems for various types of electric transports,including electric vehicles,electric boats,electric trains,and electric airplanes.The energy management of LIBs in electric transports for all-climate and long-life operation requires the accurate estimation of state of charge(SOC)and capacity in real-time.This study proposes a multistage model fusion algorithm to co-estimate SOC and capacity.Firstly,based on the assumption of a normal distribution,the mean and variance of the residual error from the model at different ageing levels are used to calculate the weight for the establishment of a fusion model with stable parameters.Secondly,a differential error gain with forward-looking ability is introduced into a proportional–integral observer(PIO)to accelerate convergence speed.Thirdly,a fusion algorithm is developed by combining a multistage model and proportional–integral–differential observer(PIDO)to co-estimate SOC and capacity under a complex application environment.Fourthly,the convergence and anti-noise performance of the fusion algorithm are discussed.Finally,the hardware-in-the-loop platform is set up to verify the performance of the fusion algorithm.The validation results of different aged LIBs over a wide range of temperature show that the presented fusion algorithm can realize a high-accuracy estimation of SOC and capacity with the relative errors within 2%and 3.3%,respectively.展开更多
Ultrathin flat metalenses have emerged as promising alternatives to conventional diffractive lenses,offering new possibilities for myriads of miniaturization and interfacial applications.Graphene-based materials can a...Ultrathin flat metalenses have emerged as promising alternatives to conventional diffractive lenses,offering new possibilities for myriads of miniaturization and interfacial applications.Graphene-based materials can achieve both phase and amplitude modulations simultaneously at a single position due to the modification of the complex refractive index and thickness by laser conversion from graphene oxide into graphene like materials.In this work,we develop graphene oxide metalenses to precisely control phase and amplitude modulations and to achieve a holistic and systematic lens design based on a graphene-based material system.We experimentally validate our strategies via demonstrations of two graphene oxide metalenses:one with an ultra-long(~16λ)optical needle,and the other with axial multifocal spots,at the wavelength of 632.8 nm with a 200 nm thin film.Our proposed graphene oxide metalenses unfold unprecedented opportunities for accurately designing graphene-based ultrathin integratable devices for broad applications.展开更多
The uncontrollable synthesis of Prussian blue (PB) and its weak stability toward OH -are great challenges affecting its electrochemical biosensing application. Herein we utilize the unique properties of chitosan (CS) ...The uncontrollable synthesis of Prussian blue (PB) and its weak stability toward OH -are great challenges affecting its electrochemical biosensing application. Herein we utilize the unique properties of chitosan (CS) to realize the facile and controllable synthesis of a CS-PB nanocomposite and combine it with the urease-catalyzed deposition of polydopamine (PDA) for amplifying the electrochemical signal inhibition of PB to develop a novel immunosensing method for protein detection. The immunosensor was constructed on a CS-PB modified electrode, and a urease-functionalized silica nanoprobe was prepared for tracing its sandwich immunoassay toward the model analyte of carcinoembryonic antigen. Besides the electrochem- ical impedance effect of the quantitatively captured nanoprobes, their enzymatic reaction can release numerous OH -to destroy the PB crystals and also induce the PDA deposition onto the immunosensor. These caused drastic electrochemical signal inhibition to PB. Based on the above multi-signal amplification mechanism, the method exhibits a very low detection limit of 0.042 pg mL^(-1) along with a very wide linear range of six-order of magnitude. In addition, the CS-PB based immunosensor has excellent specificity, repeatability, stability and reliability. Thus this PB nanocomposite and the proposed electrochemical immunosensing method reveal a promising potential for future applications.展开更多
The growing demand for smart wearables, coupled with the omnipresence of graphene due to its array of outstanding thermal, electrical, and mechanical properties, have driven the industry-led initiatives to develop lig...The growing demand for smart wearables, coupled with the omnipresence of graphene due to its array of outstanding thermal, electrical, and mechanical properties, have driven the industry-led initiatives to develop lightweight, smart, and robust graphene-based wearable technologies. The substantial research and the increase in technology readiness levels (TRLs) of graphene-based technologies have led to the adoption of graphene in many industries. Graphene-based wearables are one such technology that involves closer interaction of graphene by the end-user. Despite this, understanding the toxicological risks associated with using graphene-based wearables is still in the fundamental stage. Herein, graphene-based wearables and industrial-scale fabrication techniques for the development of graphene-based wearables are reviewed. The main goal of the review is to initially evaluate the likelihood of user exposure to graphene from the wearable device and the potential health effects. The subsequent health risks based on graphene's physicochemical characteristics are also discussed. A framework to elucidate the risk is presented in terms of crucial exposure routes, possible graphene interactions, recent exposure assessments, detection removal techniques from the human body, and risk management protocols. It is hoped that this review may aid towards establishing a reasonable practice concerning the safe integration of graphene materials into wearables and facilitate their commercialization.展开更多
With the rising demand for fast-charging technology in electric vehicles and portable devices,significant efforts have been devoted to the development of the highrate batteries.Among numerous candidates,rechargeable a...With the rising demand for fast-charging technology in electric vehicles and portable devices,significant efforts have been devoted to the development of the highrate batteries.Among numerous candidates,rechargeable aqueous zinc-ion batteries(ZlBs)are a promising option due to its high theoretical capacity,low redox potential of zinc metal anode and inherent high ionic conductivity of aqueous electrolyte.As the strong electrostatic interaction between Zn^(2+)and host generally leads to sluggish electrode kinetics,many strategies have been proposed to enhance fast(dis)charging performance.Herein,we review the state-of-the-art ultrafast aqueous ZIBs and focus on the rational electrode-designing strategies,such as crystal structure engineering,nanostructuring and morphology controlling,conductive materials introducing and organic molecule designing.Recent research directions and future perspectives are also proposed in this review.展开更多
State of charge(SOC)estimation for lithium ion batteries plays a critical role in battery management systems for electric vehicles.Battery fractional order models(FOMs)which come from frequency-domain modelling have p...State of charge(SOC)estimation for lithium ion batteries plays a critical role in battery management systems for electric vehicles.Battery fractional order models(FOMs)which come from frequency-domain modelling have provided a distinct insight into SOC estimation.In this article,we compare five state-of-the-art FOMs in terms of SOC estimation.To this end,firstly,characterisation tests on lithium ion batteries are conducted,and the experimental results are used to identify FOM parameters.Parameter identification results show that increasing the complexity of FOMs cannot always improve accuracy.The model R(RQ)W shows superior identification accuracy than the other four FOMs.Secondly,the SOC estimation based on a fractional order unscented Kalman filter is conducted to compare model accuracy and computational burden under different profiles,memory lengths,ambient temperatures,cells and voltage/current drifts.The evaluation results reveal that the SOC estimation accuracy does not necessarily positively correlate to the complexity of FOMs.Although more complex models can have better robustness against temperature variation,R(RQ),the simplest FOM,can overall provide satisfactory accuracy.Validation results on different cells demonstrate the generalisation ability of FOMs,and R(RQ)outperforms other models.Moreover,R(RQ)shows better robustness against truncation error and can maintain high accuracy even under the occurrence of current or voltage sensor drift.展开更多
This study examines the performance of integration methods for hybrid simulation of large and complex structural systems in the context of structural collapse due to seismic excitations. The target application is not ...This study examines the performance of integration methods for hybrid simulation of large and complex structural systems in the context of structural collapse due to seismic excitations. The target application is not necessarily for real-time testing, but rather for models that involve large-scale physical sub-structures and highly nonlinear numerical models. Four case studies are presented and discussed. In the first case study, the accuracy of integration schemes including two widely used methods, namely, modified version of the implicit Newmark with fixed-number of iteration （iterative） and the operator-splitting （non-iterative） is examined through pure numerical simulations. The second case study presents the results of 10 hybrid simulations repeated with the two aforementioned integration methods considering various time steps and fixed-number of iterations for the iterative integration method. The physical sub-structure in these tests consists of a single-degree-of-freedom （SDOF） cantilever column with replaceable steel coupons that provides repeatable highly- nonlinear behavior including fracture-type strength and stiffness degradations. In case study three, the implicit Newmark with fixed-number of iterations is applied for hybrid simulations of a 1：2 scale steel moment frame that includes a relatively complex nonlinear numerical substructure. Lastly, a more complex numerical substructure is considered by constructing a nonlinear computational model of a moment frame coupled to a hybrid model ofa 1：2 scale steel gravity frame. The last two case studies are conducted on the same porotype structure and the selection of time steps and fixed number of iterations are closely examined in pre-test simulations. The generated unbalance forces is used as an index to track the equilibrium error and predict the accuracy and stability of the simulations.展开更多
The control of ultrafast optical field is of great interest in developing ultrafast optics as well as the investigation on vari-ous light-matter interactions with ultrashort pulses.However,conventional spatial encodin...The control of ultrafast optical field is of great interest in developing ultrafast optics as well as the investigation on vari-ous light-matter interactions with ultrashort pulses.However,conventional spatial encoding approaches have only lim-ited steerable targets usually neglecting the temporal effect,thus hindering their broad applications.Here we present a new concept for realizing ultrafast modulation of multi-target focal fields based on the facile combination of time-depend-ent vectorial diffraction theory with fast Fourier transform.This is achieved by focusing femtosecond pulsed light carrying vectorial-vortex by a single objective lens under tight focusing condition.It is uncovered that the ultrafast temporal de-gree of freedom within a configurable temporal duration(~400 fs)plays a pivotal role in determining the rich and exotic features of the focused optical field at one time,namely,bright-dark alternation,periodic rotation,and longitudinal/trans-verse polarization conversion.The underlying control mechanisms have been unveiled.Besides being of academic in-terest in diverse ultrafast spectral regimes,these peculiar behaviors of the space-time evolutionary beams may underpin prolific ultrafast-related applications such as multifunctional integrated optical chip,high-efficiency laser trapping,micro-structure rotation,super-resolution optical microscopy,precise optical measurement,and liveness tracking.展开更多
Controlling hydrogen sulfide(H2S)odors and emissions using a single,effective treatment across a town-scale sewer network is a challenge faced by many water utilities.Implementation of a sewer diversion provided the o...Controlling hydrogen sulfide(H2S)odors and emissions using a single,effective treatment across a town-scale sewer network is a challenge faced by many water utilities.Implementation of a sewer diversion provided the opportunity to compare the effectiveness of magnesium hydroxide(Mg(OH)2)and two biological dosing compounds(Bioproducts A and B),with different modes of action(MOA),in a field-test across a large sewer network.Mg(OH)2 increases sewer p H allowing suppression of H2S release into the sewer environment while Bioproduct A acts to disrupt microbial communication through quorum sensing(QS),reducing biofilm integrity.Bioproduct B reduces H2S odors by scouring the sewer of fats,oils and grease(FOGs),which provide adhesion points for the microbial biofilm.Results revealed that only Mg(OH)2 altered the microbial community structure and reduced H2S emissions in a live sewer system,whilst Bioproducts A and B did not reduce H2S emissions or have an observable effect on the composition of the microbial community at the dosed site.Study results recommend in situ testing of dosing treatments before implementation across an operational system.展开更多
In this work, we focus on the optical super-resolution effect induced by strong nonlinear saturation absorption(NSA) of graphene oxide(GO) membranes. The third-order optical nonlinearities are characterized by the can...In this work, we focus on the optical super-resolution effect induced by strong nonlinear saturation absorption(NSA) of graphene oxide(GO) membranes. The third-order optical nonlinearities are characterized by the canonical Z-scan technique under femtosecond laser(wavelength: 800 nm, pulse width: 100 fs) excitation. Through controlling the applied femtosecond laser energy, NSA of the GO films can be tuned continuously. The GO film is placed at the focal plane as a unique amplitude filter to improve the resolution of the focused field. A multi-layer system model is proposed to present the generation of a deep sub-wavelength spot associated with the nonlinearity of GO films. Moreover, the parameter conditions to achieve the best resolution(~λ/6) are determined entirely. The demonstrated results here are useful for high density optical recoding and storage, nanolithography, and super-resolution optical imaging.展开更多
Artificial ammonia synthesis using solar energy is of great significance as it can help narrow the gap to the zero-net emission target.However,the current photocatalytic activity is generally too low for mass producti...Artificial ammonia synthesis using solar energy is of great significance as it can help narrow the gap to the zero-net emission target.However,the current photocatalytic activity is generally too low for mass production.Herein,we report a novel bismuth bromide oxide(BiOBr)-Tetracyanoquinodimethane(TCNQ)photocatalyst prepared via a facile self-assembly method.Due to the well-match band structure of TCNQ and Bi OBr,the separation and transfer of photogenerated electron-hole pairs were significantly boosted.More importantly,the abundant delocalizedπelectrons of TCNQ,and the electron-withdrawing property of TNCQ made electrons efficiently accumulated on the catalysts,which can strengthen the adsorption and cleavage of nitrogen molecules.As a result,the photocatalytic activity increased significantly.The highest ammonia yield of the optimized sample reached 2.617 mg/(h gcat),which was 5.6-fold as that of pristine BiOBr and higher than the reported BiOBr-based photocatalysts.The isotope labeled^(15)N_(2)was used to confirm that the ammonia is formed form the fixation of N_(2).Meanwhile,the sample also had good stability.After 4-time usage,the photocatalysts still had about 81.8%as the fresh sample.The results of this work provide a new way for optimizing the electronic structure of photocatalysts to achieve highly efficient photochemical N_(2) reduction.展开更多
Several detailed studies have comprehensively investigated the benefits and limitations of laser-assisted machining(LAM)of titanium alloys.These studies have highlighted the positive impact of the application of laser...Several detailed studies have comprehensively investigated the benefits and limitations of laser-assisted machining(LAM)of titanium alloys.These studies have highlighted the positive impact of the application of laser preheating on reducing cutting forces and improving productivity but have also identified the detrimental effect of LAM on tool life.This paper seeks to evaluate a series of the most common cutting tools with different coating types used in the machining of titanium alloys to identify whether coating type has a dramatic effect on the dominant tool wear mechanisms active during the process.The findings provide a clear illustration that the challenges facing the application of LAM are associated with the development of new types of cutting tools which are not subjected to the diffusion-controlled wear processes that dominate the performance of current cutting tools.展开更多
This paper proposes a new element-based multi-material topology optimization algorithm using a single variable for minimizing compliance subject to a mass constraint.A single variable based on the normalized elemental...This paper proposes a new element-based multi-material topology optimization algorithm using a single variable for minimizing compliance subject to a mass constraint.A single variable based on the normalized elemental density is used to overcome the occurrence of meaningless design variables and save computational cost.Different from the traditional material penalization scheme,the algorithm is established on the ordered ersatz material model,which linearly interpolates Young’s modulus for relaxed design variables.To achieve a multi-material design,the multiple floating projection constraints are adopted to gradually push elemental design variables to multiple discrete values.For the convergent element-based solution,the multiple level-set functions are constructed to tentatively extract the smooth interface between two adjacent materials.Some 2D and 3D numerical examples are presented to demonstrate the effectiveness of the proposed algorithm and the possible advantage of the multi-material designs over the traditional solid-void designs.展开更多
The effect of annealing of Ti foils before anodization on the morphology and electrochemical performance of resultant nanoporous anatase TiO2 （np-TiO2） as anode in rechargeable lithium-ion batteries （LIBs） was inv...The effect of annealing of Ti foils before anodization on the morphology and electrochemical performance of resultant nanoporous anatase TiO2 （np-TiO2） as anode in rechargeable lithium-ion batteries （LIBs） was investigated. The np-TiO2 anode fabricated from annealed Ti foils exhibited higher specific surface area and reduced pore diameter compared to np-TiO2 electrode fabricated from as-received Ti foils. The highly porous np-TiO2 anode fabricated from annealed Ti foils exhibited 1st discharge capacity of 453.25 mAh/g and reduced to 172.70 mAh/g at 1 C current rate after 300 cycles; whilst the np-TiO2 electrode fabricated from the as-received Ti foils exhibited 1st discharge capacity of 213.30 mAh/g and reduced to 160.0 mAh/g at 1 C current rate after 300cycles. Even after 400cycles, such np-TiO2 electrode exhibited a reversible capacity of 125.0 mAh/g at 2.5 C current rate. Compared to the untreated Ti foils, the enhanced electro- chemical performance of np-TiO2 anode fabricated from annealed Ti foils was ascribed to the annealing- induced removal of residual stress among the Ti atoms. The benefit of annealing process can reduce pore size of as-fabricated np-TiO2.展开更多
In this work,we synthesized MoS_(2)catalyst via one-step hydrothermal method,and systematically investigated the catalytic effect of MoS_(2)on the hydrogen storage properties of MgH_(2).The MgH_(2)-5MoS_(2)composite m...In this work,we synthesized MoS_(2)catalyst via one-step hydrothermal method,and systematically investigated the catalytic effect of MoS_(2)on the hydrogen storage properties of MgH_(2).The MgH_(2)-5MoS_(2)composite milled for 5 h starts to release hydrogen at 259℃.Furthermore,it can desorb 4.0 wt.%hydrogen within 20 min at 280℃,and absorb 4.5 wt.%hydrogen within 5 min at 200℃.Mo and MoS_(2)coexistedin the ball milled sample,whereas only Mo was kept in the sample after dehydrogenation and rehydrogenation,which greatly weakens theMg-H bonds and facilitates the dissociation of MgH_(2)on the surface of Mo(110).The comparative study show that the formed MgS has nocatalytic effect for MgH_(2).We believed that the evolution and the catalytic mechanism of MoS_(2)will provide the theoretical guidance for theapplication of metal sulfide in hydrogen storage materials.展开更多
This paper presents the design of decentralized repetitive control （RC） for multi-input multi-output （MIMO） systems. An optimization method is used to obtain a RC compensator that ensures system stability and good...This paper presents the design of decentralized repetitive control （RC） for multi-input multi-output （MIMO） systems. An optimization method is used to obtain a RC compensator that ensures system stability and good tracking performance. The designed compensator is in the form of a stable, low order, and causal filter, in which the compensator can be implemented separately without being merged with the RC internal model. This will reduce complexity in the implementation. Simulation results and comparison study are given to demonstrate the effectiveness of the proposed design. The novelty of design is also verified in experiments on a 2 degrees of freedom （DOF） robot.展开更多
Nanoporous anatase TiO_2 （np-TiO_2） electrodes have been developed via the anodization of titanium foils in fluoride containing electrolytes, and its application in rechargeable lithium-ion batteries （LIBs） was in...Nanoporous anatase TiO_2 （np-TiO_2） electrodes have been developed via the anodization of titanium foils in fluoride containing electrolytes, and its application in rechargeable lithium-ion batteries （LIBs） was investigated. Four different types of np-TiO_2 electrodes with different pore diameters of 14.7±8.2 nm, 12.85±6.8 nm, 11.0±5.5, and 26.7±13.6 nm were fabricated for evaluating the effect of nanoporous characteristics on the LIB performance. The discharge capacity of the four battery types 1, 2, 3, and 4 were 132.7 mAh·g^-1, 316.7 mAh·g^-1, 154.3 mAh·g^-1, and 228.4 mAh·g^-1, respectively. In addition, these electrodes 1, 2, 3, and 4 exhibited reversible capacity of 106.9 mAh·g^-1 after 295th, 180.9 mAh·g^-1 after 220th, 126.1 mAh·g^-1 after 150th, and 206.7 mAh·g^-1 after 85th cycle at a rate of 1 C, respectively. It was noted that the cyclic life of the batteries had an inverse relationship, and the capacity had a proportional relationship to the pore diameter. The enhanced electrochemical performance of the nanoporous electrodes can be attributed to the improved conductivity and the enhanced kinetics of lithium insertion/extraction at electrode/electrolyte interfaces because of the large specific surface area of np-TiO_2 electrodes.展开更多
Electric double-layer capacitors(EDLCs) are emerging technologies to meet the ever-increasing demand for sustainable energy storage devices and systems in the 21 st Century owing to their advantages such as long lifet...Electric double-layer capacitors(EDLCs) are emerging technologies to meet the ever-increasing demand for sustainable energy storage devices and systems in the 21 st Century owing to their advantages such as long lifetime, fast charging speed and environmentally-friendly nature, which play a critical part in satisfying the demand of electronic devices and systems. Although it is generally accepted that EDLCs are suitable for working at low temperatures down to-40℃, there is a lack of comprehensive review to summarize the quantified performance of EDLCs when they are subjected to low-temperature environments. The rapid and growing demand for high-performance EDLCs for auxiliary power systems in the aeronautic and aerospace industries has triggered the urge to extend their operating temperature range,especially at temperatures below-40℃. This article presents an overview of EDLC’s performance and their challenges at extremely low temperatures including the capability of storing a considerable amount of electrical energy and maintaining long-term stability. The selection of electrolytes and electrode materials is crucial to the performance of EDLCs operating at a desired low-temperature range. Strategies to improve EDLC’s performance at extremely low temperatures are discussed, followed by the future perspectives to motivate more future studies to be conducted in this area.展开更多
基金supported by the JSPS KAKENHI(Grant No.JP21K04724)the Iketani Science and Technology Foundation(No.0331126-A).
文摘High entropy compounds were proven to exhibit excellent catalytic activity.Here,a series of amorphous CrMnFeCoNi Oxy-carbide films were successfully synthesized by one-step electrodeposition.As demonstrated,the film presented superior electrocatalytic activity for oxygen evolution reaction(OER)with an overpotential of 295 mV at a current density of 10 mA/cm^(2).Uniquely,selective dissolution of Chromium(Cr)was observed,which increased the catalytic activity and showed high stability under a large current density of up to 400 mA/cm^(2).Cr dissolution not only increased the surface area but also improved the conductivity due to newly formed metal-metal bonding,promoting electron transfer and improving OER performance.As revealed by density functional theory(DFT)calculations,Cr-dissolution mediates the bonding of OER intermediates over surface active sites and ultimately reduces OER overpotential.The one-step electrodeposition method and the micro-dissolution mechanism provided a potential way to design and prepare high entropy compound electrodes,aiming to achieve efficient water electrolysis.
基金This work was supported by the National Key Research and Development Program of China(2017YFB0103802)the National Natural Science Foundation of China(51922006 and 51707011).
文摘Lithium-ion batteries(LIBs)have emerged as the preferred energy storage systems for various types of electric transports,including electric vehicles,electric boats,electric trains,and electric airplanes.The energy management of LIBs in electric transports for all-climate and long-life operation requires the accurate estimation of state of charge(SOC)and capacity in real-time.This study proposes a multistage model fusion algorithm to co-estimate SOC and capacity.Firstly,based on the assumption of a normal distribution,the mean and variance of the residual error from the model at different ageing levels are used to calculate the weight for the establishment of a fusion model with stable parameters.Secondly,a differential error gain with forward-looking ability is introduced into a proportional–integral observer(PIO)to accelerate convergence speed.Thirdly,a fusion algorithm is developed by combining a multistage model and proportional–integral–differential observer(PIDO)to co-estimate SOC and capacity under a complex application environment.Fourthly,the convergence and anti-noise performance of the fusion algorithm are discussed.Finally,the hardware-in-the-loop platform is set up to verify the performance of the fusion algorithm.The validation results of different aged LIBs over a wide range of temperature show that the presented fusion algorithm can realize a high-accuracy estimation of SOC and capacity with the relative errors within 2%and 3.3%,respectively.
基金Hongtao Wang acknowledges the support from National Key Research and Development Program of China(2017YFB0403602)China Scholarship Council.Baohua Jia acknowledges the support from the Australian Research Council through the Discovery Projects(DP150102972,DP190103186)+5 种基金the Industrial Transformation Training Centres scheme(Grant No.IC180100005)support from Defence Science Institute(DSI)and Defence Science and Technology Group(DSTG).C.W.Q.acknowledges the support from the National Research Foundation,Prime Minister’s Office,Singapore,under its Competitive Research Programme(CRP award NRF CRP22-2019-0006)Advanced Research and Technology Innovation Centre(ARTIC)under the grant(R-261-518-004-720)A STAR under Advanced Manufacturing and Engineering(AME)Individual Research Grant(IRG A2083c0060)Tian Lan acknowledges National Key Basic Research Program 973 Project(2013CB329202)National Major Scientific Instruments and Equipments Development Project supported by National Natural Science Foundation of China(No.61827814).
文摘Ultrathin flat metalenses have emerged as promising alternatives to conventional diffractive lenses,offering new possibilities for myriads of miniaturization and interfacial applications.Graphene-based materials can achieve both phase and amplitude modulations simultaneously at a single position due to the modification of the complex refractive index and thickness by laser conversion from graphene oxide into graphene like materials.In this work,we develop graphene oxide metalenses to precisely control phase and amplitude modulations and to achieve a holistic and systematic lens design based on a graphene-based material system.We experimentally validate our strategies via demonstrations of two graphene oxide metalenses:one with an ultra-long(~16λ)optical needle,and the other with axial multifocal spots,at the wavelength of 632.8 nm with a 200 nm thin film.Our proposed graphene oxide metalenses unfold unprecedented opportunities for accurately designing graphene-based ultrathin integratable devices for broad applications.
基金financially supported by the National Natural Science Foundation of China (No. 22076043)the Science and Technology Foundation for Excellent Creative Research Group of Hubei Provincial Department of Education (No. T201810)。
文摘The uncontrollable synthesis of Prussian blue (PB) and its weak stability toward OH -are great challenges affecting its electrochemical biosensing application. Herein we utilize the unique properties of chitosan (CS) to realize the facile and controllable synthesis of a CS-PB nanocomposite and combine it with the urease-catalyzed deposition of polydopamine (PDA) for amplifying the electrochemical signal inhibition of PB to develop a novel immunosensing method for protein detection. The immunosensor was constructed on a CS-PB modified electrode, and a urease-functionalized silica nanoprobe was prepared for tracing its sandwich immunoassay toward the model analyte of carcinoembryonic antigen. Besides the electrochem- ical impedance effect of the quantitatively captured nanoprobes, their enzymatic reaction can release numerous OH -to destroy the PB crystals and also induce the PDA deposition onto the immunosensor. These caused drastic electrochemical signal inhibition to PB. Based on the above multi-signal amplification mechanism, the method exhibits a very low detection limit of 0.042 pg mL^(-1) along with a very wide linear range of six-order of magnitude. In addition, the CS-PB based immunosensor has excellent specificity, repeatability, stability and reliability. Thus this PB nanocomposite and the proposed electrochemical immunosensing method reveal a promising potential for future applications.
基金the Swinburne University Postgraduate Research Awards research grant and thank AINSE Limited for providing financial assistance(PGRA-ALNSTU12654)The authors also thank the grant support from the Defense Innovation Hub(P19-222133)NH would like to thank the Australian Research Council for the ARC DECRA(DE170101249)and LP200301659 research grants.
文摘The growing demand for smart wearables, coupled with the omnipresence of graphene due to its array of outstanding thermal, electrical, and mechanical properties, have driven the industry-led initiatives to develop lightweight, smart, and robust graphene-based wearable technologies. The substantial research and the increase in technology readiness levels (TRLs) of graphene-based technologies have led to the adoption of graphene in many industries. Graphene-based wearables are one such technology that involves closer interaction of graphene by the end-user. Despite this, understanding the toxicological risks associated with using graphene-based wearables is still in the fundamental stage. Herein, graphene-based wearables and industrial-scale fabrication techniques for the development of graphene-based wearables are reviewed. The main goal of the review is to initially evaluate the likelihood of user exposure to graphene from the wearable device and the potential health effects. The subsequent health risks based on graphene's physicochemical characteristics are also discussed. A framework to elucidate the risk is presented in terms of crucial exposure routes, possible graphene interactions, recent exposure assessments, detection removal techniques from the human body, and risk management protocols. It is hoped that this review may aid towards establishing a reasonable practice concerning the safe integration of graphene materials into wearables and facilitate their commercialization.
基金the Scientific Research Project of Beijing Municipal Education Commission(No.KM201911417004)the National Natural Science Foundation of China(Nos.51822201 and 51972292)。
文摘With the rising demand for fast-charging technology in electric vehicles and portable devices,significant efforts have been devoted to the development of the highrate batteries.Among numerous candidates,rechargeable aqueous zinc-ion batteries(ZlBs)are a promising option due to its high theoretical capacity,low redox potential of zinc metal anode and inherent high ionic conductivity of aqueous electrolyte.As the strong electrostatic interaction between Zn^(2+)and host generally leads to sluggish electrode kinetics,many strategies have been proposed to enhance fast(dis)charging performance.Herein,we review the state-of-the-art ultrafast aqueous ZIBs and focus on the rational electrode-designing strategies,such as crystal structure engineering,nanostructuring and morphology controlling,conductive materials introducing and organic molecule designing.Recent research directions and future perspectives are also proposed in this review.
基金Beijing Municipal Natural Science Foundation of China(Grant No.3182035)National Natural Science Foundation of China(Grant No.51877009).
文摘State of charge(SOC)estimation for lithium ion batteries plays a critical role in battery management systems for electric vehicles.Battery fractional order models(FOMs)which come from frequency-domain modelling have provided a distinct insight into SOC estimation.In this article,we compare five state-of-the-art FOMs in terms of SOC estimation.To this end,firstly,characterisation tests on lithium ion batteries are conducted,and the experimental results are used to identify FOM parameters.Parameter identification results show that increasing the complexity of FOMs cannot always improve accuracy.The model R(RQ)W shows superior identification accuracy than the other four FOMs.Secondly,the SOC estimation based on a fractional order unscented Kalman filter is conducted to compare model accuracy and computational burden under different profiles,memory lengths,ambient temperatures,cells and voltage/current drifts.The evaluation results reveal that the SOC estimation accuracy does not necessarily positively correlate to the complexity of FOMs.Although more complex models can have better robustness against temperature variation,R(RQ),the simplest FOM,can overall provide satisfactory accuracy.Validation results on different cells demonstrate the generalisation ability of FOMs,and R(RQ)outperforms other models.Moreover,R(RQ)shows better robustness against truncation error and can maintain high accuracy even under the occurrence of current or voltage sensor drift.
基金National Science Foundation(NSF)under grant No.CMMI-0748111
文摘This study examines the performance of integration methods for hybrid simulation of large and complex structural systems in the context of structural collapse due to seismic excitations. The target application is not necessarily for real-time testing, but rather for models that involve large-scale physical sub-structures and highly nonlinear numerical models. Four case studies are presented and discussed. In the first case study, the accuracy of integration schemes including two widely used methods, namely, modified version of the implicit Newmark with fixed-number of iteration （iterative） and the operator-splitting （non-iterative） is examined through pure numerical simulations. The second case study presents the results of 10 hybrid simulations repeated with the two aforementioned integration methods considering various time steps and fixed-number of iterations for the iterative integration method. The physical sub-structure in these tests consists of a single-degree-of-freedom （SDOF） cantilever column with replaceable steel coupons that provides repeatable highly- nonlinear behavior including fracture-type strength and stiffness degradations. In case study three, the implicit Newmark with fixed-number of iterations is applied for hybrid simulations of a 1：2 scale steel moment frame that includes a relatively complex nonlinear numerical substructure. Lastly, a more complex numerical substructure is considered by constructing a nonlinear computational model of a moment frame coupled to a hybrid model ofa 1：2 scale steel gravity frame. The last two case studies are conducted on the same porotype structure and the selection of time steps and fixed number of iterations are closely examined in pre-test simulations. The generated unbalance forces is used as an index to track the equilibrium error and predict the accuracy and stability of the simulations.
基金supported by the National Natural Science Foundation of China (Nos. 11974258, 11604236, 61575139)Key Research and Development (R&D) Projects of Shanxi Province (201903D121127)+2 种基金Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi (2019L0151)the Natural Sciences Foundation in Shanxi Province (201901D111117)the financial support from the Australian Research Council (Australian Research Council (DP190103186, IC180100005)
文摘The control of ultrafast optical field is of great interest in developing ultrafast optics as well as the investigation on vari-ous light-matter interactions with ultrashort pulses.However,conventional spatial encoding approaches have only lim-ited steerable targets usually neglecting the temporal effect,thus hindering their broad applications.Here we present a new concept for realizing ultrafast modulation of multi-target focal fields based on the facile combination of time-depend-ent vectorial diffraction theory with fast Fourier transform.This is achieved by focusing femtosecond pulsed light carrying vectorial-vortex by a single objective lens under tight focusing condition.It is uncovered that the ultrafast temporal de-gree of freedom within a configurable temporal duration(~400 fs)plays a pivotal role in determining the rich and exotic features of the focused optical field at one time,namely,bright-dark alternation,periodic rotation,and longitudinal/trans-verse polarization conversion.The underlying control mechanisms have been unveiled.Besides being of academic in-terest in diverse ultrafast spectral regimes,these peculiar behaviors of the space-time evolutionary beams may underpin prolific ultrafast-related applications such as multifunctional integrated optical chip,high-efficiency laser trapping,micro-structure rotation,super-resolution optical microscopy,precise optical measurement,and liveness tracking.
基金supported by an Australian Postgraduate Award at La Trobe Universityadditional financial support from industry collaborators Western Water
文摘Controlling hydrogen sulfide(H2S)odors and emissions using a single,effective treatment across a town-scale sewer network is a challenge faced by many water utilities.Implementation of a sewer diversion provided the opportunity to compare the effectiveness of magnesium hydroxide(Mg(OH)2)and two biological dosing compounds(Bioproducts A and B),with different modes of action(MOA),in a field-test across a large sewer network.Mg(OH)2 increases sewer p H allowing suppression of H2S release into the sewer environment while Bioproduct A acts to disrupt microbial communication through quorum sensing(QS),reducing biofilm integrity.Bioproduct B reduces H2S odors by scouring the sewer of fats,oils and grease(FOGs),which provide adhesion points for the microbial biofilm.Results revealed that only Mg(OH)2 altered the microbial community structure and reduced H2S emissions in a live sewer system,whilst Bioproducts A and B did not reduce H2S emissions or have an observable effect on the composition of the microbial community at the dosed site.Study results recommend in situ testing of dosing treatments before implementation across an operational system.
基金supported by the National Natural Science Foundation of China(Nos.61575139,51602213 and 11604236)the Young Science Foundation of Taiyuan University of Technology(No.2015QN066)
文摘In this work, we focus on the optical super-resolution effect induced by strong nonlinear saturation absorption(NSA) of graphene oxide(GO) membranes. The third-order optical nonlinearities are characterized by the canonical Z-scan technique under femtosecond laser(wavelength: 800 nm, pulse width: 100 fs) excitation. Through controlling the applied femtosecond laser energy, NSA of the GO films can be tuned continuously. The GO film is placed at the focal plane as a unique amplitude filter to improve the resolution of the focused field. A multi-layer system model is proposed to present the generation of a deep sub-wavelength spot associated with the nonlinearity of GO films. Moreover, the parameter conditions to achieve the best resolution(~λ/6) are determined entirely. The demonstrated results here are useful for high density optical recoding and storage, nanolithography, and super-resolution optical imaging.
基金supported by an Australian Research Council(ARC)Future Fellowship(FT160100195)the support from National Natural Science Foundation of China(21607034)+3 种基金Beijing Natural Science Foundation(8192011)Science and Technology General Project of Beijing Municipal Education Commission(KM202010016006)the Pyramid Talent Training Project of Beijing University of Civil Engineering and Architecture(JDYC20200313)the support of Key Talent Project of Gansu Province。
文摘Artificial ammonia synthesis using solar energy is of great significance as it can help narrow the gap to the zero-net emission target.However,the current photocatalytic activity is generally too low for mass production.Herein,we report a novel bismuth bromide oxide(BiOBr)-Tetracyanoquinodimethane(TCNQ)photocatalyst prepared via a facile self-assembly method.Due to the well-match band structure of TCNQ and Bi OBr,the separation and transfer of photogenerated electron-hole pairs were significantly boosted.More importantly,the abundant delocalizedπelectrons of TCNQ,and the electron-withdrawing property of TNCQ made electrons efficiently accumulated on the catalysts,which can strengthen the adsorption and cleavage of nitrogen molecules.As a result,the photocatalytic activity increased significantly.The highest ammonia yield of the optimized sample reached 2.617 mg/(h gcat),which was 5.6-fold as that of pristine BiOBr and higher than the reported BiOBr-based photocatalysts.The isotope labeled^(15)N_(2)was used to confirm that the ammonia is formed form the fixation of N_(2).Meanwhile,the sample also had good stability.After 4-time usage,the photocatalysts still had about 81.8%as the fresh sample.The results of this work provide a new way for optimizing the electronic structure of photocatalysts to achieve highly efficient photochemical N_(2) reduction.
文摘Several detailed studies have comprehensively investigated the benefits and limitations of laser-assisted machining(LAM)of titanium alloys.These studies have highlighted the positive impact of the application of laser preheating on reducing cutting forces and improving productivity but have also identified the detrimental effect of LAM on tool life.This paper seeks to evaluate a series of the most common cutting tools with different coating types used in the machining of titanium alloys to identify whether coating type has a dramatic effect on the dominant tool wear mechanisms active during the process.The findings provide a clear illustration that the challenges facing the application of LAM are associated with the development of new types of cutting tools which are not subjected to the diffusion-controlled wear processes that dominate the performance of current cutting tools.
基金This work was supported by Hunan Provincial Innovation Foundation for Postgraduate(CX20190278)FJUT Scientific Research Foundation(GY-Z17015)Open Fund of Fujian Key Laboratory of Automotive Electronics and Electric Drive(KF-X19001).
文摘This paper proposes a new element-based multi-material topology optimization algorithm using a single variable for minimizing compliance subject to a mass constraint.A single variable based on the normalized elemental density is used to overcome the occurrence of meaningless design variables and save computational cost.Different from the traditional material penalization scheme,the algorithm is established on the ordered ersatz material model,which linearly interpolates Young’s modulus for relaxed design variables.To achieve a multi-material design,the multiple floating projection constraints are adopted to gradually push elemental design variables to multiple discrete values.For the convergent element-based solution,the multiple level-set functions are constructed to tentatively extract the smooth interface between two adjacent materials.Some 2D and 3D numerical examples are presented to demonstrate the effectiveness of the proposed algorithm and the possible advantage of the multi-material designs over the traditional solid-void designs.
基金the financially support to this research by the Australian Research Council (ARC) through the ARC Discovery Project DP170102557
文摘The effect of annealing of Ti foils before anodization on the morphology and electrochemical performance of resultant nanoporous anatase TiO2 （np-TiO2） as anode in rechargeable lithium-ion batteries （LIBs） was investigated. The np-TiO2 anode fabricated from annealed Ti foils exhibited higher specific surface area and reduced pore diameter compared to np-TiO2 electrode fabricated from as-received Ti foils. The highly porous np-TiO2 anode fabricated from annealed Ti foils exhibited 1st discharge capacity of 453.25 mAh/g and reduced to 172.70 mAh/g at 1 C current rate after 300 cycles; whilst the np-TiO2 electrode fabricated from the as-received Ti foils exhibited 1st discharge capacity of 213.30 mAh/g and reduced to 160.0 mAh/g at 1 C current rate after 300cycles. Even after 400cycles, such np-TiO2 electrode exhibited a reversible capacity of 125.0 mAh/g at 2.5 C current rate. Compared to the untreated Ti foils, the enhanced electro- chemical performance of np-TiO2 anode fabricated from annealed Ti foils was ascribed to the annealing- induced removal of residual stress among the Ti atoms. The benefit of annealing process can reduce pore size of as-fabricated np-TiO2.
基金supported by the financial supports from Science and Technology Commission of Shanghai Municipality(No.19ZR1418400)the National Natural Science Foundation of China(No.51971126)+1 种基金Guangdong Innovation Research Team for Higher Education(2017KCXTD030)the Science and Technology Committee of Shanghai(19010500400).
文摘In this work,we synthesized MoS_(2)catalyst via one-step hydrothermal method,and systematically investigated the catalytic effect of MoS_(2)on the hydrogen storage properties of MgH_(2).The MgH_(2)-5MoS_(2)composite milled for 5 h starts to release hydrogen at 259℃.Furthermore,it can desorb 4.0 wt.%hydrogen within 20 min at 280℃,and absorb 4.5 wt.%hydrogen within 5 min at 200℃.Mo and MoS_(2)coexistedin the ball milled sample,whereas only Mo was kept in the sample after dehydrogenation and rehydrogenation,which greatly weakens theMg-H bonds and facilitates the dissociation of MgH_(2)on the surface of Mo(110).The comparative study show that the formed MgS has nocatalytic effect for MgH_(2).We believed that the evolution and the catalytic mechanism of MoS_(2)will provide the theoretical guidance for theapplication of metal sulfide in hydrogen storage materials.
文摘This paper presents the design of decentralized repetitive control （RC） for multi-input multi-output （MIMO） systems. An optimization method is used to obtain a RC compensator that ensures system stability and good tracking performance. The designed compensator is in the form of a stable, low order, and causal filter, in which the compensator can be implemented separately without being merged with the RC internal model. This will reduce complexity in the implementation. Simulation results and comparison study are given to demonstrate the effectiveness of the proposed design. The novelty of design is also verified in experiments on a 2 degrees of freedom （DOF） robot.
基金supported by the Australia-India Strategic Research Fund(AISRF,ST060048)
文摘Nanoporous anatase TiO_2 （np-TiO_2） electrodes have been developed via the anodization of titanium foils in fluoride containing electrolytes, and its application in rechargeable lithium-ion batteries （LIBs） was investigated. Four different types of np-TiO_2 electrodes with different pore diameters of 14.7±8.2 nm, 12.85±6.8 nm, 11.0±5.5, and 26.7±13.6 nm were fabricated for evaluating the effect of nanoporous characteristics on the LIB performance. The discharge capacity of the four battery types 1, 2, 3, and 4 were 132.7 mAh·g^-1, 316.7 mAh·g^-1, 154.3 mAh·g^-1, and 228.4 mAh·g^-1, respectively. In addition, these electrodes 1, 2, 3, and 4 exhibited reversible capacity of 106.9 mAh·g^-1 after 295th, 180.9 mAh·g^-1 after 220th, 126.1 mAh·g^-1 after 150th, and 206.7 mAh·g^-1 after 85th cycle at a rate of 1 C, respectively. It was noted that the cyclic life of the batteries had an inverse relationship, and the capacity had a proportional relationship to the pore diameter. The enhanced electrochemical performance of the nanoporous electrodes can be attributed to the improved conductivity and the enhanced kinetics of lithium insertion/extraction at electrode/electrolyte interfaces because of the large specific surface area of np-TiO_2 electrodes.
基金the Australian Research Council for its support through the Discovery Project scheme (DP190103186)the Industrial Transformation Training Centre Scheme(IC180100005)。
文摘Electric double-layer capacitors(EDLCs) are emerging technologies to meet the ever-increasing demand for sustainable energy storage devices and systems in the 21 st Century owing to their advantages such as long lifetime, fast charging speed and environmentally-friendly nature, which play a critical part in satisfying the demand of electronic devices and systems. Although it is generally accepted that EDLCs are suitable for working at low temperatures down to-40℃, there is a lack of comprehensive review to summarize the quantified performance of EDLCs when they are subjected to low-temperature environments. The rapid and growing demand for high-performance EDLCs for auxiliary power systems in the aeronautic and aerospace industries has triggered the urge to extend their operating temperature range,especially at temperatures below-40℃. This article presents an overview of EDLC’s performance and their challenges at extremely low temperatures including the capability of storing a considerable amount of electrical energy and maintaining long-term stability. The selection of electrolytes and electrode materials is crucial to the performance of EDLCs operating at a desired low-temperature range. Strategies to improve EDLC’s performance at extremely low temperatures are discussed, followed by the future perspectives to motivate more future studies to be conducted in this area.
