Economic losses and catastrophic casualties may occur once super high-rise structures are struck by low-probability but high-consequence scenarios of concurrent earthquakes and winds. Therefore, accurately predicting ...Economic losses and catastrophic casualties may occur once super high-rise structures are struck by low-probability but high-consequence scenarios of concurrent earthquakes and winds. Therefore, accurately predicting multi-hazard dynamic responses to super high-rise structures has significant engineering and scientific value. This study performed a parametric global sensitivity analysis (GSA) for multi-hazard dynamic response prediction of super high-rise structures using the multiple-degree-of-freedom shear (MFS) model. Polynomial chaos Kriging (PCK) was introduced to build a surrogate model that allowed GSA to be combined with Sobol’ indices. Monte Carlo simulation (MCS) is also conducted for the comparison to verify the accuracy and efficiency of the PCK method. Parametric sensitivity analysis is performed for a wide range of aleatory uncertainty (intensities of coupled multi-hazard), epistemic uncertainty (bending stiffness, k_(m);shear stiffness, kq;density, ρ;and damping ratio, ξ), probability distribution types, and coefficients of variation. The results indicate that epistemic uncertainty parameters, k_(m), ρ, and ξ dramatically affect the multi-hazard dynamic responses of super high-rise structures;in addition, Sobol’ indices between the normal and lognormal distributions are insignificant, while the variation levels have remarkably influenced the sensitivity indices.展开更多
In order to study the differences in vertical component between onshore and offshore motions,the vertical-to-horizontal peak ground acceleration ratio(V/H PGA ratio) and vertical-to-horizontal response spectral ratio(...In order to study the differences in vertical component between onshore and offshore motions,the vertical-to-horizontal peak ground acceleration ratio(V/H PGA ratio) and vertical-to-horizontal response spectral ratio(V/H) were investigated using the ground motion recordings from the K-NET network and the seafloor earthquake measuring system(SEMS).The results indicate that the vertical component of offshore motions is lower than that of onshore motions.The V/H PGA ratio of acceleration time histories at offshore stations is about 50%of the ratio at onshore stations.The V/H for offshore ground motions is lower than that for onshore motions,especially for periods less than 0.8 s.Furthermore,based on the results in statistical analysis for offshore recordings in the K-NET,the simplified V/H design equations for offshore motions in minor and moderate earthquakes are proposed for seismic analysis of offshore structures.展开更多
The fatigue property of asphalt mixtures under complicated environment （low-temperature bending performance, chloride penetration, freezing-thawing cycle and their coupling effect） and the improvement effect for rel...The fatigue property of asphalt mixtures under complicated environment （low-temperature bending performance, chloride penetration, freezing-thawing cycle and their coupling effect） and the improvement effect for relevant property of basalt fiber-reinforcing asphalt mixture under complicated environment are studied. Two grading types of asphalt mixtures, AC-16I and AC-13I, are chosen, whose optimum asphalt-aggregate ratio and optimum dosage of basalt fiber are determined by the Marshall test. The standard specimens are made firstly, and then the low temperature bending tests of asphalt mixture and basalt fiber-reinforced asphalt mixture under the coupling effect of the chloride erosion and freezing-thawing cycle have been carried out. Finally, the fatigue property tests of asphalt mixture and basalt fiber-reinforced asphalt mixture under complex environment are performed on MTS material testing system. The results indicate that the tensile strength, the maximum curving tensile stress, the curving stiffness modulus, and fatigue properties of asphalt mixture are influenced by the coupling effect of the chloride erosion and freezing-thawing cycle. The low-temperature bending performance and fatigue property of asphalt mixtures under complicated environment can be greatly improved by adding moderate basalt fiber. The dense gradation asphalt mixture possesses stronger ability to resist adverse environmental effects under the same condition.展开更多
In order to study the influence of temperature on compressive strength of polymer grouting material,the compression specimen injection mold is self-made,and the uniaxial compressive test was carried out in the tempera...In order to study the influence of temperature on compressive strength of polymer grouting material,the compression specimen injection mold is self-made,and the uniaxial compressive test was carried out in the temperature control box under different temperatures.The change regularity of compressive strength of polymer grouting material under different temperatures and the law of volume changes of polymer samples were obtained.The experimental results show that：the compressive strength of polymer material increases with the increase of density;the temperature change has a certain influence on the compressive strength of polymer grouting material;the compressive strength decreases with temperature increases under the same density,but the compressive strength is not significantly affected by temperature when the density is less than 0.4 g/cm3;the volume change of the samples accords with the law of thermal expansion and contraction when temperature changes,and the increase of the volume is obvious when it is under high temperature.The achievements will provide an important basis to the application of the polymer grouting material.展开更多
The fluid-structure interaction under seismic excitation is very complicated, and thus the damage identification of the bridge in deep water is the key technique to ensure the safe service. Based on nonlinear Morison ...The fluid-structure interaction under seismic excitation is very complicated, and thus the damage identification of the bridge in deep water is the key technique to ensure the safe service. Based on nonlinear Morison equation considering the added mass effect and the fluid-structure interaction effect, the effect of hydrodynamic pressure on the structure is analyzed. A series of underwater shaking table tests are conducted in the air and in water. The dynamic characteristics affected by hydrodynamic pressure are discussed and the distribution of hydrodynamic pressure is also analyzed. In addition, the damage of structure is distinguished through the natural frequency and the difference of modal curvature, and is then compared with the test results. The numerical simulation and test of this study indicate that the effect of hydrodynamic pressure on the structure should not be neglected. It is also found that the presence of the damage, the location of the damage and the degree of the severity can be judged through the variation of structure frequency and the difference of modal curvature.展开更多
Structural health monitoring is important to ensuring the health and safety of dams.An inverse analysis method based on a novel hybrid fireworks algorithm (FWA) and the radial basis function (RBF) model is proposed to...Structural health monitoring is important to ensuring the health and safety of dams.An inverse analysis method based on a novel hybrid fireworks algorithm (FWA) and the radial basis function (RBF) model is proposed to diagnose the health condition of concrete dams.The damage of concrete dams is diagnosed by identifying the elastic modulus of materials using the displacement changes at different reservoir water levels.FWA is a global optimization intelligent algorithm.The proposed hybrid algorithm combines the FWA with the pattern search algorithm, which has a high capability for local optimization.Examples of benchmark functions and pseudo-experiment examples of concrete dams illustrate that the hybrid FWA improves the convergence speed and robustness of the original algorithm.To address the time consumption problem, an RBF-based surrogate model was established to replace part of the finite element method in inverse analysis.Numerical examples of concrete dams illustrate that the use of an RBF-based surrogate model significantly reduces the computation time of inverse analysis with little influence on identification accuracy.The presented hybrid FWA combined with the RBF network can quickly and accurately determine the elastic modulus of materials, and then determine the health status of the concrete dam.展开更多
This paper presents a novel approach to model and simulate the multi-support depth-varying seismic motions（MDSMs） within heterogeneous offshore and onshore sites.Based on 1 D wave propagation theory,the three-dimens...This paper presents a novel approach to model and simulate the multi-support depth-varying seismic motions（MDSMs） within heterogeneous offshore and onshore sites.Based on 1 D wave propagation theory,the three-dimensional ground motion transfer functions on the surface or within an offshore or onshore site are derived by considering the effects of seawater and porous soils on the propagation of seismic P waves.Moreover,the depth-varying and spatial variation properties of seismic ground motions are considered in the ground motion simulation.Using the obtained transfer functions at any locations within a site,the offshore or onshore depth-varying seismic motions are stochastically simulated based on the spectral representation method（SRM）.The traditional approaches for simulating spatially varying ground motions are improved and extended to generate MDSMs within multiple offshore and onshore sites.The simulation results show that the PSD functions and coherency losses of the generated MDSMs are compatible with respective target values,which fully validates the effectiveness of the proposed simulation method.The synthesized MDSMs can provide strong support for the precise seismic response prediction and performance-based design of both offshore and onshore large-span engineering structures.展开更多
For the purpose of inventing a new seismic retrofitting method for the reinforced high strength concrete （HSC） T-section beam using carbon fiber reinforced polymer （CFRP） sheet, three series, a total of twelve T-s...For the purpose of inventing a new seismic retrofitting method for the reinforced high strength concrete （HSC） T-section beam using carbon fiber reinforced polymer （CFRP） sheet, three series, a total of twelve T-section beams with nine specimens confined by CFRP sheet in the plastic zone and three control beams were conducted up to failure under four-point bending test. The effectiveness of confining CFRP sheet on improving the flexural ductility of tmstrengthened T-section beams was studied. The parameters such as the width and the thickness of CFRP sheet and the type of T-section were analyzed. The experimental results show that ductility and rotation capacity of plastic hinge can be improved by the confinement of CFRP sheet, and the ductility indices increase with the increment of width and thickness of CFRP sheet. A plastic rotation model considering the width of CFRP sheet and the effect of flange of T-section beam is proposed on the basis of the model of BAKER, and the test results show a good agreement with the perdicted results. The relevant construction suggestions for seismic retrofitting design of beam-slabs system in cast-in-place framework structure are presented.展开更多
Added mass and damping coefficients are very important in hydrodynamic analysis of naval structures. In this paper,a double submerged inclined plates with ‘/\’ configuration is firstly considered. By use of the boun...Added mass and damping coefficients are very important in hydrodynamic analysis of naval structures. In this paper,a double submerged inclined plates with ‘/\’ configuration is firstly considered. By use of the boundary element method(BEM) based on Green function with the wave term, the radiation problem of this special type structure is investigated. The added mass and damping coefficients due to different plate lengths and inclined angles are obtained. The results show that: the added mass and damping coefficients for sway are the largest. Heave is the most sensitive mode to inclined angles. The wave frequencies of the maximal added mass and damping coefficients for sway and roll are the same.展开更多
Stress intensity factors （SIFs） for the cracked circular disks under different distributing surface tractions are evaluated with the scaled boundary finite element method （SBFEM）. In the SBFEM, the analytical adva...Stress intensity factors （SIFs） for the cracked circular disks under different distributing surface tractions are evaluated with the scaled boundary finite element method （SBFEM）. In the SBFEM, the analytical advantage of the solution in the radial direction allows SIFs to be directly determined from its definition, therefore no special crack-tip treatment is necessary. Furthermore anisotropic material behavior can be treated easily. Different distributions of surface tractions are considered for the center and double-edge-cracked disks. The benchmark examples are modeled and an excellent agreement between the results in the present study and those in published literature is found. It shows that SBFEM is effective and possesses high accuracy. The SIFs of the cracked orthotropic material circular disks subjected to different surface tractions are also evaluated. The technique of substructure is applied to handle the multiple cracks problem.展开更多
Engineering structures may be exposed to one or more extreme hazards during their life-cycles.Current structural design specifications usually treat multiple hazards separately in designing structures and there is a l...Engineering structures may be exposed to one or more extreme hazards during their life-cycles.Current structural design specifications usually treat multiple hazards separately in designing structures and there is a limited probabilistic basis on extreme load combinations.Additionally,the performance of engineering structures will be deteriorated by the aggressive environments during their service periods,such as chloride attack,concrete carbonation,and wind-induced fatigue.This study presents a probabilistic methodology to assess the time-dependent failure probability of RC bridges with chloride-induced corrosion under the multiple hazards of earthquakes and strong winds.The loss of cross-section area of reinforcements and the reduction in strength of reinforcing steel and concrete cover induced by the chloride attack are considered.Moreover,the Poisson model is employed to obtain the occurrence probabilities of the individual and concurrent earthquake and strong wind events.The convolution integral is used to determine the joint probability distribution of combined load effects under simultaneous earthquakes and strong winds.Numerical results indicate that the structural failure probability under multiple hazards increases significantly during the bridge′s life-cycle due to the chloride corrosion effect.The contribution of each hazard event on the total structural failure probability varies with time.Thus,neglecting the combined influences of multiple hazards and chloride-induced corrosion may bring erroneous predictions in failure probability estimates of RC bridges.展开更多
This paper aims at exploring the effects of anti-seismic reinforcement with the fiber-reinforced polymer （FRP） material bonded to the dam surface in dam engineering. Time-history analysis was performed to simulate t...This paper aims at exploring the effects of anti-seismic reinforcement with the fiber-reinforced polymer （FRP） material bonded to the dam surface in dam engineering. Time-history analysis was performed to simulate the seismic failure process of a gravity dam that was assumed to be reinforced at the locations of slope discontinuity at the downstream surface, part of the upstream face, and the dam heel. A damage model considering the influence of concrete heterogeneity was used to model the nonlinearity of concrete. A bond-slip model was applied to the interface between FRP and concrete, and the reinforcement mechanism was analyzed through the bond stress and the stress in FRP. The results of the crack pattern, displacement, and acceleration of the reinforced dam were compared with those of the original one. It is shown that FRP, as a reinforcement material, postpones the occurrence of cracks and slows the crack propagation, and that cracks emanating from the upstream surface and downstream surface are not connected, meaning that the reinforced dam can retain water-impounding function when subjected to the earthquake. Anti-seismic reinforcement with FRP is therefore beneficial to improving the seismic resistant capability of concrete dams.展开更多
The functional piezoelectric ceramic smart aggregate(SA) sensors and actuators,based on piezoelectric ceramic materials such as lead zirconium titanate(PZT),were embedded into the reinforced concrete beams with three-...The functional piezoelectric ceramic smart aggregate(SA) sensors and actuators,based on piezoelectric ceramic materials such as lead zirconium titanate(PZT),were embedded into the reinforced concrete beams with three-point bending under static loading for purposes of damage detection.The SA actuators generated the desired sine sweep excitation signals online and the SA sensors received and detected real-time signals before and after damage.The wavelet analysis and statistical characteristics about damage signals were used as a signal processing and analysis tool to extract the optimal damage information and establish a statistical damage detection algorithm.The damage index-based wavelet analysis and damage probability-based probability and statistics were proposed by PZT wavebased theory and active health monitoring technology.The results showed that the existence of cracks inside largely attenuated the amplitude of active monitoring signal after the damage of beam and the attenuation was related to the severity degree of damage.The innovative statistical algorithm of damage pattern detection based PZT-SA can effectively determine damage probability and damage degree,and provide a prediction for the critical damage location of reinforced concrete structures.The developed method can be utilized for the structural health comprehensive monitoring and damage detection on line of various large-scale concrete structures.展开更多
Owing to the stochastic behavior of earthquakes and complex crustal structure,wave type and incident direction are uncertain when seismic waves arrive at a structure.In addition,because of the different types of the s...Owing to the stochastic behavior of earthquakes and complex crustal structure,wave type and incident direction are uncertain when seismic waves arrive at a structure.In addition,because of the different types of the structures and terrains,the traveling wave effects have different influences on the dynamic response of the structures.For the tall concrete-faced rockfill dam(CFRD),it is not only built in the complex terrain such as river valley,but also its height has reached 300 m level,which puts forward higher requirements for the seismic safety of the anti-seepage system mainly comprising concrete face slabs,especially the accurate location of the weak area in seism.Considering the limitations of the traditional uniform vibration analysis method,we implemented an efficient dynamic interaction analysis between a tall CFRD and its foundation using a non-uniform wave input method with a viscous-spring artificial boundary and equivalent nodal loads.This method was then applied to investigate the dynamic stress distribution on the concrete face slabs for different seismic wave types and incident directions.The results indicate that dam-foundation interactions behave differently at different wave incident angles,and that the traveling wave effect becomes more evident in valley topography.Seismic wave type and incident direction dramatically influenced stress in the face slab,and the extreme stress values and distribution law will vary under oblique wave incidence.The influence of the incident direction on slab stress was particularly apparent when SH-waves arrived from the left bank.Specifically,the extreme stress values in the face slab increased with an increasing incident angle.Interestingly,the locations of the extreme stress values changed mainly along the axis of the dam,and did not exhibit large changes in height.The seismic safety of CFRDs is therefore lower at higher incident angles from an anti-seepage perspective.Therefore,it is necessary to consider both the seismic wave type and incident direction during seismic capacity evaluations of tall CFRDs.展开更多
To achieve rational and precise seismic response predictions of large span spatial structures(LSSSs),the inherent non-uniformity and multidimensionality characteristics of earthquake ground motions should be properly ...To achieve rational and precise seismic response predictions of large span spatial structures(LSSSs),the inherent non-uniformity and multidimensionality characteristics of earthquake ground motions should be properly taken into consideration.However,due to the limitations of available earthquake stations to record seismic rotational components,the effects of rocking and torsional earthquake components are commonly neglected in the seismic analyses of LSSSs.In this study,a newly developed method to extract the rocking and torsion components at any point along the area of a deployed dense array from the translational earthquake recordings is applied to obtain the rotational seismic inputs for a LSSS.The numerical model of an actual LSSS,the Dalian International Conference Center(DICC),is developed to study the influences of multi-support and multidimensional excitations on the seismic responses of LSSSs.The numerical results reveal that the non-uniformity and multidimensionality of ground motion input can considerably affect the dynamic response of the DICC.The specific degree of influence on the overall and local structural displacements,deformations and forces are comprehensively investigated and discussed.展开更多
Steel frames equipped with buckling restrained braces(BRBs)have been increasingly applied in earthquake-prone areas given their excellent capacity for resisting lateral forces.Therefore,special attention has been paid...Steel frames equipped with buckling restrained braces(BRBs)have been increasingly applied in earthquake-prone areas given their excellent capacity for resisting lateral forces.Therefore,special attention has been paid to the seismic risk assessment(SRA)of such structures,e.g.,seismic fragility analysis.Conventional approaches,e.g.,nonlinear finite element simulation(NFES),are computationally inefficient for SRA analysis particularly for large-scale steel BRB frame structures.In this study,amachine learning(ML)-based seismic fragility analysis framework is established to effectively assess the risk to structures under seismic loading conditions.An optimal artificial neural network model can be trained using calculated damage and intensity measures,a technique which will be used to compute the fragility curves of a steel BRB frame instead of employing NFES.Numerical results show that a highly efficient instantaneous failure probability assessment can be made with the proposed framework for realistic large-scale building structures.展开更多
Steel wire wound reinforced flexible pipe in this study mainly consists of multiple anisotropic steel wire wound reinforcement layers and multiple isotropic rubber layers.Based on 3D anisotropic elastic theory,the ana...Steel wire wound reinforced flexible pipe in this study mainly consists of multiple anisotropic steel wire wound reinforcement layers and multiple isotropic rubber layers.Based on 3D anisotropic elastic theory,the analytic solutions of stresses and elastic deformations of steel wire wound reinforced rubber flexible pipe under internal pressure are presented.As the adjacent reinforcement layers with wound angle have different radii,the single reinforcement layer shows the effect of tensile-shear coupling.Moreover,the static loading test results of steel wire wound reinforced rubber flexible pipe under internal pressure are basically coincided with the calculated values by present method.展开更多
As a new type of structure which has never been built, submerged floating tunnel was studied mainly by numerical simulations. To further study the seismic response of a submerged floating tunnel, the first model exper...As a new type of structure which has never been built, submerged floating tunnel was studied mainly by numerical simulations. To further study the seismic response of a submerged floating tunnel, the first model experiment of submerged floating tunnel （SFT） under the earthquake was carried out on the unique underwater shaking table in China. The experimental results show that vertical excitation induces larger response than horizontal and different inclination degrees of the tether also cause different seismic responses. Subsequently, based on the fluid-structure interaction theory, the corresponding numerical model is established. And comparing the numerical results with the experimental results, those of shaking table test. Numerical model adopted is effective for it is shown that the numerical results are basically identical with dynamic response of SFT.展开更多
Peridynamics(PD)is a widely used theory to simulate discontinuities,but its application in real-world structural problems is somewhat limited due to the relatively low-efficiency.The numerical substructure method(NSM)...Peridynamics(PD)is a widely used theory to simulate discontinuities,but its application in real-world structural problems is somewhat limited due to the relatively low-efficiency.The numerical substructure method(NSM)presented by the authors and co-workers provides an efficient approach for modeling structures with local nonlinearities,which is usually restricted in problems of continuum mechanics.In this paper,an approach is presented to couple the PD theory with the NSM for modeling structures with local discontinuities,taking advantage of the powerful capability of the PD for discontinuities simulation and high computational efficiency of the NSM.The structure is simulated using liner elastic finite element(FE)model while the local cracking regions are isolated and simulated using a PD substructure model.A force corrector calculated from the PD model is applied on the FE model to consider the effect of discontinuities.The PD is integrated in the substructure model using interface elements with embedded PD nodes.The equations of motions of both the NSM system and the PD substructure are solved using the central difference method.Three examples of two-dimensional(2D)concrete cantilever beams under the concentrated force are investigated to verify the proposed coupling approach.展开更多
The topic of offshore wind energy is attracting more and more attention as the energy crisis heightens.The blades are the key components of offshore wind turbines,and their dynamic characteristics directly determine t...The topic of offshore wind energy is attracting more and more attention as the energy crisis heightens.The blades are the key components of offshore wind turbines,and their dynamic characteristics directly determine the effectiveness of offshore wind turbines.With different rotating speeds and blade length,the rotating blades generate various centrifugal stiffening effects.To directly analyze the centrifugal stiffening effect of blades,the Rayleigh energy method (REM) was used to derive the natural frequency equation of the blade,including the centrifugal stiffening effect and the axial force calculation formula.The axial force planes and the first to third order natural frequency planes which vary with the rotating speed and length were calculated in three-dimensional coordinates.The centrifugal stiffening coefficient was introduced to quantitatively study the relationship between the centrifugal stiffening degree and the rotating speed,and then the fundamental frequency correction formula was built based on the rotating speed and the blade length.The analysis results show that the calculation results of the fundamental frequency correction formula agree with the theoretical calculation results.The error of calculation results between them is less than 0.5%.展开更多
基金Dalian Municipal Natural Science Foundation under Grant No.2019RD01。
文摘Economic losses and catastrophic casualties may occur once super high-rise structures are struck by low-probability but high-consequence scenarios of concurrent earthquakes and winds. Therefore, accurately predicting multi-hazard dynamic responses to super high-rise structures has significant engineering and scientific value. This study performed a parametric global sensitivity analysis (GSA) for multi-hazard dynamic response prediction of super high-rise structures using the multiple-degree-of-freedom shear (MFS) model. Polynomial chaos Kriging (PCK) was introduced to build a surrogate model that allowed GSA to be combined with Sobol’ indices. Monte Carlo simulation (MCS) is also conducted for the comparison to verify the accuracy and efficiency of the PCK method. Parametric sensitivity analysis is performed for a wide range of aleatory uncertainty (intensities of coupled multi-hazard), epistemic uncertainty (bending stiffness, k_(m);shear stiffness, kq;density, ρ;and damping ratio, ξ), probability distribution types, and coefficients of variation. The results indicate that epistemic uncertainty parameters, k_(m), ρ, and ξ dramatically affect the multi-hazard dynamic responses of super high-rise structures;in addition, Sobol’ indices between the normal and lognormal distributions are insignificant, while the variation levels have remarkably influenced the sensitivity indices.
基金Project(2011CB013605)supported by the National Basic Research Development Program of China(973 Program)Projects(51178071,51008041)supported by the National Natural Science Foundation of ChinaProject(NCET-12-0751)supported by the New Century Excellent Talents Program in University of Ministry of Education of China
文摘In order to study the differences in vertical component between onshore and offshore motions,the vertical-to-horizontal peak ground acceleration ratio(V/H PGA ratio) and vertical-to-horizontal response spectral ratio(V/H) were investigated using the ground motion recordings from the K-NET network and the seafloor earthquake measuring system(SEMS).The results indicate that the vertical component of offshore motions is lower than that of onshore motions.The V/H PGA ratio of acceleration time histories at offshore stations is about 50%of the ratio at onshore stations.The V/H for offshore ground motions is lower than that for onshore motions,especially for periods less than 0.8 s.Furthermore,based on the results in statistical analysis for offshore recordings in the K-NET,the simplified V/H design equations for offshore motions in minor and moderate earthquakes are proposed for seismic analysis of offshore structures.
基金Fund by Collaborative Innovation Center of Water Conservancy&Transportation Infrastructure Safety,Henan Province,China Postdoctoral Science Fund(No.20110491008)Science and Technology Planning Project of Department of Transportation of Henan Province(No.2013-2-12)The State Key Laboratory Open Fund of Harbor,Coastal and Offshore Engineering(No.LP1113)
文摘The fatigue property of asphalt mixtures under complicated environment （low-temperature bending performance, chloride penetration, freezing-thawing cycle and their coupling effect） and the improvement effect for relevant property of basalt fiber-reinforcing asphalt mixture under complicated environment are studied. Two grading types of asphalt mixtures, AC-16I and AC-13I, are chosen, whose optimum asphalt-aggregate ratio and optimum dosage of basalt fiber are determined by the Marshall test. The standard specimens are made firstly, and then the low temperature bending tests of asphalt mixture and basalt fiber-reinforced asphalt mixture under the coupling effect of the chloride erosion and freezing-thawing cycle have been carried out. Finally, the fatigue property tests of asphalt mixture and basalt fiber-reinforced asphalt mixture under complex environment are performed on MTS material testing system. The results indicate that the tensile strength, the maximum curving tensile stress, the curving stiffness modulus, and fatigue properties of asphalt mixture are influenced by the coupling effect of the chloride erosion and freezing-thawing cycle. The low-temperature bending performance and fatigue property of asphalt mixtures under complicated environment can be greatly improved by adding moderate basalt fiber. The dense gradation asphalt mixture possesses stronger ability to resist adverse environmental effects under the same condition.
文摘In order to study the influence of temperature on compressive strength of polymer grouting material,the compression specimen injection mold is self-made,and the uniaxial compressive test was carried out in the temperature control box under different temperatures.The change regularity of compressive strength of polymer grouting material under different temperatures and the law of volume changes of polymer samples were obtained.The experimental results show that：the compressive strength of polymer material increases with the increase of density;the temperature change has a certain influence on the compressive strength of polymer grouting material;the compressive strength decreases with temperature increases under the same density,but the compressive strength is not significantly affected by temperature when the density is less than 0.4 g/cm3;the volume change of the samples accords with the law of thermal expansion and contraction when temperature changes,and the increase of the volume is obvious when it is under high temperature.The achievements will provide an important basis to the application of the polymer grouting material.
基金financially supported jointly by the National Basic Research Program of China(973 Program,Grant No.2011CB013605-4)the National Natural Science Foundation of China(Grant No.51178079)the Major Program of National Natural Science Foundation of China(Grant Nos.90915011 and 91315301)
文摘The fluid-structure interaction under seismic excitation is very complicated, and thus the damage identification of the bridge in deep water is the key technique to ensure the safe service. Based on nonlinear Morison equation considering the added mass effect and the fluid-structure interaction effect, the effect of hydrodynamic pressure on the structure is analyzed. A series of underwater shaking table tests are conducted in the air and in water. The dynamic characteristics affected by hydrodynamic pressure are discussed and the distribution of hydrodynamic pressure is also analyzed. In addition, the damage of structure is distinguished through the natural frequency and the difference of modal curvature, and is then compared with the test results. The numerical simulation and test of this study indicate that the effect of hydrodynamic pressure on the structure should not be neglected. It is also found that the presence of the damage, the location of the damage and the degree of the severity can be judged through the variation of structure frequency and the difference of modal curvature.
基金supported by the National Key Research and Development Program of China(Grants No.2016YFC0401600 and 2017YFC0404906)the National Natural Science Foundation of China(Grants No.51769033 and 51779035)the Fundamental Research Funds for the Central Universities(Grants No.DUT17ZD205 and DUT19LK14)
文摘Structural health monitoring is important to ensuring the health and safety of dams.An inverse analysis method based on a novel hybrid fireworks algorithm (FWA) and the radial basis function (RBF) model is proposed to diagnose the health condition of concrete dams.The damage of concrete dams is diagnosed by identifying the elastic modulus of materials using the displacement changes at different reservoir water levels.FWA is a global optimization intelligent algorithm.The proposed hybrid algorithm combines the FWA with the pattern search algorithm, which has a high capability for local optimization.Examples of benchmark functions and pseudo-experiment examples of concrete dams illustrate that the hybrid FWA improves the convergence speed and robustness of the original algorithm.To address the time consumption problem, an RBF-based surrogate model was established to replace part of the finite element method in inverse analysis.Numerical examples of concrete dams illustrate that the use of an RBF-based surrogate model significantly reduces the computation time of inverse analysis with little influence on identification accuracy.The presented hybrid FWA combined with the RBF network can quickly and accurately determine the elastic modulus of materials, and then determine the health status of the concrete dam.
基金National Key R&D Program of China under Grant No.2016YFC0701108the State Key Program of National Natural Science Foundation of China under Grant No.51738007
文摘This paper presents a novel approach to model and simulate the multi-support depth-varying seismic motions（MDSMs） within heterogeneous offshore and onshore sites.Based on 1 D wave propagation theory,the three-dimensional ground motion transfer functions on the surface or within an offshore or onshore site are derived by considering the effects of seawater and porous soils on the propagation of seismic P waves.Moreover,the depth-varying and spatial variation properties of seismic ground motions are considered in the ground motion simulation.Using the obtained transfer functions at any locations within a site,the offshore or onshore depth-varying seismic motions are stochastically simulated based on the spectral representation method（SRM）.The traditional approaches for simulating spatially varying ground motions are improved and extended to generate MDSMs within multiple offshore and onshore sites.The simulation results show that the PSD functions and coherency losses of the generated MDSMs are compatible with respective target values,which fully validates the effectiveness of the proposed simulation method.The synthesized MDSMs can provide strong support for the precise seismic response prediction and performance-based design of both offshore and onshore large-span engineering structures.
基金Project(51121005) supported by the Science Fund for Creative Research Groups of the National Natural Science Foundation of ChinaProject(50878035) supported by the National Natural Science Foundation of China
文摘For the purpose of inventing a new seismic retrofitting method for the reinforced high strength concrete （HSC） T-section beam using carbon fiber reinforced polymer （CFRP） sheet, three series, a total of twelve T-section beams with nine specimens confined by CFRP sheet in the plastic zone and three control beams were conducted up to failure under four-point bending test. The effectiveness of confining CFRP sheet on improving the flexural ductility of tmstrengthened T-section beams was studied. The parameters such as the width and the thickness of CFRP sheet and the type of T-section were analyzed. The experimental results show that ductility and rotation capacity of plastic hinge can be improved by the confinement of CFRP sheet, and the ductility indices increase with the increment of width and thickness of CFRP sheet. A plastic rotation model considering the width of CFRP sheet and the effect of flange of T-section beam is proposed on the basis of the model of BAKER, and the test results show a good agreement with the perdicted results. The relevant construction suggestions for seismic retrofitting design of beam-slabs system in cast-in-place framework structure are presented.
基金financially supported by the National Key Basic Research Program of China(Grant No.2013CB036101)the National Natural Science Foundation of China(Grant No.51379037)
文摘Added mass and damping coefficients are very important in hydrodynamic analysis of naval structures. In this paper,a double submerged inclined plates with ‘/\’ configuration is firstly considered. By use of the boundary element method(BEM) based on Green function with the wave term, the radiation problem of this special type structure is investigated. The added mass and damping coefficients due to different plate lengths and inclined angles are obtained. The results show that: the added mass and damping coefficients for sway are the largest. Heave is the most sensitive mode to inclined angles. The wave frequencies of the maximal added mass and damping coefficients for sway and roll are the same.
基金financially supported by the National Natural Youth Foundation of China (Grant Nos. 51109134,51009019, 11102118 and 51208310)the Liaoning Province Education Administration Foundation (Grant No. L2010413)+1 种基金the China Postdoctoral Science Foundation (Grant No. 2011M500557)the Natural Science Foundation of Liaoning Province (Grant No.20102164)
文摘Stress intensity factors （SIFs） for the cracked circular disks under different distributing surface tractions are evaluated with the scaled boundary finite element method （SBFEM）. In the SBFEM, the analytical advantage of the solution in the radial direction allows SIFs to be directly determined from its definition, therefore no special crack-tip treatment is necessary. Furthermore anisotropic material behavior can be treated easily. Different distributions of surface tractions are considered for the center and double-edge-cracked disks. The benchmark examples are modeled and an excellent agreement between the results in the present study and those in published literature is found. It shows that SBFEM is effective and possesses high accuracy. The SIFs of the cracked orthotropic material circular disks subjected to different surface tractions are also evaluated. The technique of substructure is applied to handle the multiple cracks problem.
基金Supported by:Fundamental Research Funds for the Central Universities under Grant No.2021QN1022。
文摘Engineering structures may be exposed to one or more extreme hazards during their life-cycles.Current structural design specifications usually treat multiple hazards separately in designing structures and there is a limited probabilistic basis on extreme load combinations.Additionally,the performance of engineering structures will be deteriorated by the aggressive environments during their service periods,such as chloride attack,concrete carbonation,and wind-induced fatigue.This study presents a probabilistic methodology to assess the time-dependent failure probability of RC bridges with chloride-induced corrosion under the multiple hazards of earthquakes and strong winds.The loss of cross-section area of reinforcements and the reduction in strength of reinforcing steel and concrete cover induced by the chloride attack are considered.Moreover,the Poisson model is employed to obtain the occurrence probabilities of the individual and concurrent earthquake and strong wind events.The convolution integral is used to determine the joint probability distribution of combined load effects under simultaneous earthquakes and strong winds.Numerical results indicate that the structural failure probability under multiple hazards increases significantly during the bridge′s life-cycle due to the chloride corrosion effect.The contribution of each hazard event on the total structural failure probability varies with time.Thus,neglecting the combined influences of multiple hazards and chloride-induced corrosion may bring erroneous predictions in failure probability estimates of RC bridges.
基金supported by the National Natural Science Foundation of China(Grant No.51009019)the State Key Development Program for Basic Research of China(Grant No.2013CB035905)
文摘This paper aims at exploring the effects of anti-seismic reinforcement with the fiber-reinforced polymer （FRP） material bonded to the dam surface in dam engineering. Time-history analysis was performed to simulate the seismic failure process of a gravity dam that was assumed to be reinforced at the locations of slope discontinuity at the downstream surface, part of the upstream face, and the dam heel. A damage model considering the influence of concrete heterogeneity was used to model the nonlinearity of concrete. A bond-slip model was applied to the interface between FRP and concrete, and the reinforcement mechanism was analyzed through the bond stress and the stress in FRP. The results of the crack pattern, displacement, and acceleration of the reinforced dam were compared with those of the original one. It is shown that FRP, as a reinforcement material, postpones the occurrence of cracks and slows the crack propagation, and that cracks emanating from the upstream surface and downstream surface are not connected, meaning that the reinforced dam can retain water-impounding function when subjected to the earthquake. Anti-seismic reinforcement with FRP is therefore beneficial to improving the seismic resistant capability of concrete dams.
基金Supported by Science and Technology Project of Ministry of Housing and Urban-Rural Development(No.2011k211)"11th Five-Year" Science and Technology Research Project of Education Department,Jilin Province(No.200925)Liaoning Structure Engineering Key Laboratory 2009 Open Fund(JG2009 2007-08)
文摘The functional piezoelectric ceramic smart aggregate(SA) sensors and actuators,based on piezoelectric ceramic materials such as lead zirconium titanate(PZT),were embedded into the reinforced concrete beams with three-point bending under static loading for purposes of damage detection.The SA actuators generated the desired sine sweep excitation signals online and the SA sensors received and detected real-time signals before and after damage.The wavelet analysis and statistical characteristics about damage signals were used as a signal processing and analysis tool to extract the optimal damage information and establish a statistical damage detection algorithm.The damage index-based wavelet analysis and damage probability-based probability and statistics were proposed by PZT wavebased theory and active health monitoring technology.The results showed that the existence of cracks inside largely attenuated the amplitude of active monitoring signal after the damage of beam and the attenuation was related to the severity degree of damage.The innovative statistical algorithm of damage pattern detection based PZT-SA can effectively determine damage probability and damage degree,and provide a prediction for the critical damage location of reinforced concrete structures.The developed method can be utilized for the structural health comprehensive monitoring and damage detection on line of various large-scale concrete structures.
基金supported by the National Natural Science Foundation of China(Nos.52192674,U1965206,U2240211)the Fundamental Research Funds for the Central Universities(No.DUT21TD106)。
文摘Owing to the stochastic behavior of earthquakes and complex crustal structure,wave type and incident direction are uncertain when seismic waves arrive at a structure.In addition,because of the different types of the structures and terrains,the traveling wave effects have different influences on the dynamic response of the structures.For the tall concrete-faced rockfill dam(CFRD),it is not only built in the complex terrain such as river valley,but also its height has reached 300 m level,which puts forward higher requirements for the seismic safety of the anti-seepage system mainly comprising concrete face slabs,especially the accurate location of the weak area in seism.Considering the limitations of the traditional uniform vibration analysis method,we implemented an efficient dynamic interaction analysis between a tall CFRD and its foundation using a non-uniform wave input method with a viscous-spring artificial boundary and equivalent nodal loads.This method was then applied to investigate the dynamic stress distribution on the concrete face slabs for different seismic wave types and incident directions.The results indicate that dam-foundation interactions behave differently at different wave incident angles,and that the traveling wave effect becomes more evident in valley topography.Seismic wave type and incident direction dramatically influenced stress in the face slab,and the extreme stress values and distribution law will vary under oblique wave incidence.The influence of the incident direction on slab stress was particularly apparent when SH-waves arrived from the left bank.Specifically,the extreme stress values in the face slab increased with an increasing incident angle.Interestingly,the locations of the extreme stress values changed mainly along the axis of the dam,and did not exhibit large changes in height.The seismic safety of CFRDs is therefore lower at higher incident angles from an anti-seepage perspective.Therefore,it is necessary to consider both the seismic wave type and incident direction during seismic capacity evaluations of tall CFRDs.
基金National Natural Science Foundation of China under Grant Nos.51738007,51808099the Fundamental Research Funds for the Central Universities under Grant No.DUT20RC(3)005。
文摘To achieve rational and precise seismic response predictions of large span spatial structures(LSSSs),the inherent non-uniformity and multidimensionality characteristics of earthquake ground motions should be properly taken into consideration.However,due to the limitations of available earthquake stations to record seismic rotational components,the effects of rocking and torsional earthquake components are commonly neglected in the seismic analyses of LSSSs.In this study,a newly developed method to extract the rocking and torsion components at any point along the area of a deployed dense array from the translational earthquake recordings is applied to obtain the rotational seismic inputs for a LSSS.The numerical model of an actual LSSS,the Dalian International Conference Center(DICC),is developed to study the influences of multi-support and multidimensional excitations on the seismic responses of LSSSs.The numerical results reveal that the non-uniformity and multidimensionality of ground motion input can considerably affect the dynamic response of the DICC.The specific degree of influence on the overall and local structural displacements,deformations and forces are comprehensively investigated and discussed.
基金Financial support received from the Scientific Research Fund of Institute of Engineering Mechanics,China Earthquake Administration under Grant No.2019EEEVL05the National Key Research and Development Program of China under Grant No.2016YFC0701106the National Natural Science Foundation of China under Grant No.51578473 are gratefully acknowledged.
文摘Steel frames equipped with buckling restrained braces(BRBs)have been increasingly applied in earthquake-prone areas given their excellent capacity for resisting lateral forces.Therefore,special attention has been paid to the seismic risk assessment(SRA)of such structures,e.g.,seismic fragility analysis.Conventional approaches,e.g.,nonlinear finite element simulation(NFES),are computationally inefficient for SRA analysis particularly for large-scale steel BRB frame structures.In this study,amachine learning(ML)-based seismic fragility analysis framework is established to effectively assess the risk to structures under seismic loading conditions.An optimal artificial neural network model can be trained using calculated damage and intensity measures,a technique which will be used to compute the fragility curves of a steel BRB frame instead of employing NFES.Numerical results show that a highly efficient instantaneous failure probability assessment can be made with the proposed framework for realistic large-scale building structures.
基金the National Natural Science Foundation of China (No. 50439010)
文摘Steel wire wound reinforced flexible pipe in this study mainly consists of multiple anisotropic steel wire wound reinforcement layers and multiple isotropic rubber layers.Based on 3D anisotropic elastic theory,the analytic solutions of stresses and elastic deformations of steel wire wound reinforced rubber flexible pipe under internal pressure are presented.As the adjacent reinforcement layers with wound angle have different radii,the single reinforcement layer shows the effect of tensile-shear coupling.Moreover,the static loading test results of steel wire wound reinforced rubber flexible pipe under internal pressure are basically coincided with the calculated values by present method.
基金Projects(51108224,51179026) supported by the National Natural Science Foundation of China
文摘As a new type of structure which has never been built, submerged floating tunnel was studied mainly by numerical simulations. To further study the seismic response of a submerged floating tunnel, the first model experiment of submerged floating tunnel （SFT） under the earthquake was carried out on the unique underwater shaking table in China. The experimental results show that vertical excitation induces larger response than horizontal and different inclination degrees of the tether also cause different seismic responses. Subsequently, based on the fluid-structure interaction theory, the corresponding numerical model is established. And comparing the numerical results with the experimental results, those of shaking table test. Numerical model adopted is effective for it is shown that the numerical results are basically identical with dynamic response of SFT.
基金Financial support by the National Key Research and Development program of China under Grant No.2016YFC0701106the National Natural Science Foundation of China under grants No.51578473the program of China Scholarship Council(CSC,No.201606060083)are gratefully acknowledged.
文摘Peridynamics(PD)is a widely used theory to simulate discontinuities,but its application in real-world structural problems is somewhat limited due to the relatively low-efficiency.The numerical substructure method(NSM)presented by the authors and co-workers provides an efficient approach for modeling structures with local nonlinearities,which is usually restricted in problems of continuum mechanics.In this paper,an approach is presented to couple the PD theory with the NSM for modeling structures with local discontinuities,taking advantage of the powerful capability of the PD for discontinuities simulation and high computational efficiency of the NSM.The structure is simulated using liner elastic finite element(FE)model while the local cracking regions are isolated and simulated using a PD substructure model.A force corrector calculated from the PD model is applied on the FE model to consider the effect of discontinuities.The PD is integrated in the substructure model using interface elements with embedded PD nodes.The equations of motions of both the NSM system and the PD substructure are solved using the central difference method.Three examples of two-dimensional(2D)concrete cantilever beams under the concentrated force are investigated to verify the proposed coupling approach.
基金Supported by the National Natural Science Foundation of China under Grant No.50708015the foundation of State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology
文摘The topic of offshore wind energy is attracting more and more attention as the energy crisis heightens.The blades are the key components of offshore wind turbines,and their dynamic characteristics directly determine the effectiveness of offshore wind turbines.With different rotating speeds and blade length,the rotating blades generate various centrifugal stiffening effects.To directly analyze the centrifugal stiffening effect of blades,the Rayleigh energy method (REM) was used to derive the natural frequency equation of the blade,including the centrifugal stiffening effect and the axial force calculation formula.The axial force planes and the first to third order natural frequency planes which vary with the rotating speed and length were calculated in three-dimensional coordinates.The centrifugal stiffening coefficient was introduced to quantitatively study the relationship between the centrifugal stiffening degree and the rotating speed,and then the fundamental frequency correction formula was built based on the rotating speed and the blade length.The analysis results show that the calculation results of the fundamental frequency correction formula agree with the theoretical calculation results.The error of calculation results between them is less than 0.5%.
