DNAN-based insensitive melt-cast explosives have been widely utilized in insensitive munition in recent years. When constrained DNAN-based melt-cast explosives are ignited under thermal stimulation, the base explosive...DNAN-based insensitive melt-cast explosives have been widely utilized in insensitive munition in recent years. When constrained DNAN-based melt-cast explosives are ignited under thermal stimulation, the base explosive exists in a molten liquid state, where high-temperature gases expand and react in the form of bubble clouds within the liquid explosive;this process is distinctly different from the dynamic crack propagation process observed in the case of solid explosives. In this study, a control model for the reaction evolution of burning-bubble clouds was established to describe the reaction process and quantify the reaction violence of DNAN-based melt-cast explosives, considering the size distribution and activation mechanism of the burning-bubble clouds. The feasibility of the model was verified through experimental results. The results revealed that under geometrically similar conditions, with identical confinement strength and aspect ratio, larger charge structures led to extended initial gas flow and surface burning processes, resulting in greater reaction equivalence and violence at the casing fracture.Under constant charge volume and size, a stronger casing confinement accelerated self-enhanced burning, increasing the internal pressure, reaction degree, and reaction violence. Under a constant casing thickness and radius, higher aspect ratios led to a greater reaction violence at the casing fracture.Moreover, under a constant charge volume and casing thickness, higher aspect ratios resulted in a higher internal pressure, increased reaction degree, and greater reaction violence at the casing fracture. Further,larger ullage volumes extended the reaction evolution time and increased the reaction violence under constant casing dimensions. Through a matching design of the opening threshold of the pressure relief holes and the relief structure area, a stable burning reaction could be maintained until completion,thereby achieving a control of the reaction violence. The proposed model could effectively reflect the effects of the intrinsic burning rate, casing confinement strength, charge size, ullage volume, and pressure relief structure on the reaction evolution process and reaction violence, providing a theoretical method for the thermal safety design and reaction violence evaluation of melt-cast explosives.展开更多
The new CL-20(hexanitrohexaazaisowurtzitane)type aluminized explosives in the overdrive detonation(ODD)conditions of the core problem is how to accurately represent the state of the overdrive detonation products.To th...The new CL-20(hexanitrohexaazaisowurtzitane)type aluminized explosives in the overdrive detonation(ODD)conditions of the core problem is how to accurately represent the state of the overdrive detonation products.To this end,this paper is based on the impedance matching method to test the ODD conditions of CL-20 type aluminium explosive particle velocity.Calculated the interfacial pressure of the shock wave in different media.Determined the characteristic parameters of the reaction zone of the detonation of CL-20 aluminized explosives.Calibrated the parameters of the JoneseWilkinseLee(JWL)+γ equation for the detonation products(DPs).Revealed the effect of different DPs equation of state(EOS)on the Hugoniot pressure of ODD.The results indicate that when the content of aluminum powder ranges from 0%to 30%,the duration of the ODD reaction zone and the width of the detonation reaction zone of the CL-20-based aluminized explosive are directly proportional to the content of aluminum powder.The width of the detonation reaction zone is increased by 1.97 times to 2.7 times compared to that of the reaction zone without the addition of aluminum powder.However,the energy release efficiency of the detonation reaction zone is inversely proportional to the content of aluminum powder.When the aluminum powder content was held constant,the incorporation of AP caused a 25%reduction in the energy release efficiency of the detonation reaction zone.Compared with existing ODD state equations,the JWL +γ equation is superior in calibrating overpressure Hugoniot data and the isentropic expansion in the C-J state.The deviation between calculated pressure results and experimental measurements is within 6%.展开更多
Shock wave caused by a sudden release of high-energy,such as explosion and blast,usually affects a significant range of areas.The utilization of a uniform fine mesh to capture sharp shock wave and to obtain precise re...Shock wave caused by a sudden release of high-energy,such as explosion and blast,usually affects a significant range of areas.The utilization of a uniform fine mesh to capture sharp shock wave and to obtain precise results is inefficient in terms of computational resource.This is particularly evident when large-scale fluid field simulations are conducted with significant differences in computational domain size.In this work,a variable-domain-size adaptive mesh enlargement(vAME)method is developed based on the proposed adaptive mesh enlargement(AME)method for modeling multi-explosives explosion problems.The vAME method reduces the division of numerous empty areas or unnecessary computational domains by adaptively suspending enlargement operation in one or two directions,rather than in all directions as in AME method.A series of numerical tests via AME and vAME with varying nonintegral enlargement ratios and different mesh numbers are simulated to verify the efficiency and order of accuracy.An estimate of speedup ratio is analyzed for further efficiency comparison.Several large-scale near-ground explosion experiments with single/multiple explosives are performed to analyze the shock wave superposition formed by the incident wave,reflected wave,and Mach wave.Additionally,the vAME method is employed to validate the accuracy,as well as to investigate the performance of the fluid field and shock wave propagation,considering explosive quantities ranging from 1 to 5 while maintaining a constant total mass.The results show a satisfactory correlation between the overpressure versus time curves for experiments and numerical simulations.The vAME method yields a competitive efficiency,increasing the computational speed to 3.0 and approximately 120,000 times in comparison to AME and the fully fine mesh method,respectively.It indicates that the vAME method reduces the computational cost with minimal impact on the results for such large-scale high-energy release problems with significant differences in computational domain size.展开更多
The reactive materials filled structure(RMFS)is a structural penetrator that replaces high explosive(HE)with reactive materials,presenting a novel self-distributed initiation,multiple deflagrations behavior during pen...The reactive materials filled structure(RMFS)is a structural penetrator that replaces high explosive(HE)with reactive materials,presenting a novel self-distributed initiation,multiple deflagrations behavior during penetrating multi-layered plates,and generating a multipeak overpressure behind the plates.Here analytical models of RMFS self-distributed energy release and equivalent deflagration are developed.The multipeak overpressure formation model based on the single deflagration overpressure expression was promoted.The impact tests of RMFS on multi-layered plates at 584 m/s,616 m/s,and819 m/s were performed to validate the analytical model.Further,the influence of a single overpressure peak and time intervals versus impact velocity is discussed.The analysis results indicate that the deflagration happened within 20.68 mm behind the plate,the initial impact velocity and plate thickness are the crucial factors that dominate the self-distributed multipeak overpressure effect.Three formation patterns of multipeak overpressure are proposed.展开更多
In this study,an inverse design framework was established to find lightweight honeycomb structures(HCSs)with high impact resistance.The hybrid HCS,composed of re-entrant(RE)and elliptical annular re-entrant(EARE)honey...In this study,an inverse design framework was established to find lightweight honeycomb structures(HCSs)with high impact resistance.The hybrid HCS,composed of re-entrant(RE)and elliptical annular re-entrant(EARE)honeycomb cells,was created by constructing arrangement matrices to achieve structural lightweight.The machine learning(ML)framework consisted of a neural network(NN)forward regression model for predicting impact resistance and a multi-objective optimization algorithm for generating high-performance designs.The surrogate of the local design space was initially realized by establishing the NN in the small sample dataset,and the active learning strategy was used to continuously extended the local optimal design until the model converged in the global space.The results indicated that the active learning strategy significantly improved the inference capability of the NN model in unknown design domains.By guiding the iteration direction of the optimization algorithm,lightweight designs with high impact resistance were identified.The energy absorption capacity of the optimal design reached 94.98%of the EARE honeycomb,while the initial peak stress and mass decreased by 28.85%and 19.91%,respectively.Furthermore,Shapley Additive Explanations(SHAP)for global explanation of the NN indicated a strong correlation between the arrangement mode of HCS and its impact resistance.By reducing the stiffness of the cells at the top boundary of the structure,the initial impact damage sustained by the structure can be significantly improved.Overall,this study proposed a general lightweight design method for array structures under impact loads,which is beneficial for the widespread application of honeycomb-based protective structures.展开更多
This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior...This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.展开更多
Material phase-transition represents a significant phenomenon and mechanism in the context of hypervelocity protection.This study presents a thorough analysis of the phase-transition phenomena induced by shock pressur...Material phase-transition represents a significant phenomenon and mechanism in the context of hypervelocity protection.This study presents a thorough analysis of the phase-transition phenomena induced by shock pressure as the shock wave propagates initially to the rear of the projectile.The shock wave that induces a phase-transition is commonly referred to as a macroscopic phase-transition wave,whereas the interface that separates the distinct phases is referred to as macroscopic phase-boundary.The contact interface between the spherical projectile and the thin plate,characterized by its curved surface,plays a significant role in the nonlinear propagation and evolution of wave systems.The pressure distribution along the central axis of a spherical projectile is derived in accordance with the linear decay law observed for axial pressure.On this basis,a quadratic function is employed to characterize the trend of changes in wave front pressure,thereby facilitating the establishment of a model for wave front pressure distribution.Using the phase-transition pressure criterion for materials,the wave front phase evolution process is derived,and the macroscopic phase-boundary is determined.Based on the geometric propagation model(GPM)and the pressure distribution of the wave front,a phase geometric propagation model(PGPM)is proposed.The phase distribution of a spherical projectile impacting a thin plate is obtained by theoretical methods.The accuracy of the PGPM is subsequently validated through a comparison of its results with those obtained from numerical simulations.展开更多
Flexible materials play a crucial role in protecting against behind armour blunt trauma(BABT).However,their compliance complicates the understanding of failure mechanisms and energy absorption.This study used a combin...Flexible materials play a crucial role in protecting against behind armour blunt trauma(BABT).However,their compliance complicates the understanding of failure mechanisms and energy absorption.This study used a combined experimental and numerical approach to investigate the response and failure modes of a flexible ultra-high-molecular-weight polyethylene(UHMWPE)foam protective sandwich structure(UFPSS)under low-velocity impact(LVI).A finite element(FE)model,accounting for nonlinear large deformation and strain-rate-dependent material behavior,was developed for a woven-UFPSS(featuring a plain-woven fabric structure)subjected to a 50 J impact.Experimental and numerical results showed strong agreement in peak force(error<5%),maximum displacement(error<6%),and buffer time(error<8%).The impact's kinetic energy was mainly converted into internal energy of the fabric and foam materials(~50%),viscous dissipation in the foam core(12%-15%),frictional work at the contact interfaces(5%-6%),and work by the pneumatic fixture clamping force(~38%).This study provides the first investigation of the LVI performance of sandwich structures with all soft material layers,offering significant insights for the application of compliant materials in protective fields.展开更多
The curing behavior of composites significantly influences their performance,making it crucial to understand the curing process.This study experimentally measured specific heat capacity,thermal conductivity,glass tran...The curing behavior of composites significantly influences their performance,making it crucial to understand the curing process.This study experimentally measured specific heat capacity,thermal conductivity,glass transition temperature,coefficient of thermal expansion,and cure shrinkage of materials.A simulation model of its curing deformation was established and validated against strain data obtained from fiber Bragg grating experiments.The effects of thickness,heating rate,and cooling rate on the curing temperature field and residual stress field during the molding of thick-section composite plates were analyzed.展开更多
Aiming at the problem of dynamic instability of hard-brittle jointed rock surrounding in deep tunnel/roadway engineering,combining with the support concepts of"coupling rigidity with flexibility"and"ove...Aiming at the problem of dynamic instability of hard-brittle jointed rock surrounding in deep tunnel/roadway engineering,combining with the support concepts of"coupling rigidity with flexibility"and"overcoming rigidity by flexibility",the prevention and control method with"rigid-flexible coupling(R-F-C)"was put forward.Through numerical simulation calculation,the impact damage process,acoustic emission(AE)evolution characteristics,and element stress/displacement evolution characteristics of unsupported surrounding rock structure model,rigid supporting surrounding rock structure model,and"R-F-C"supporting surrounding rock structure model under horizontal bidirectional impact loading were compared and analyzed.Based on the theory of stress wave propagation,the dynamic instability catastrophe mechanism of three kinds of supporting structure models induced by horizontal bidirectional impact loading was revealed.Based on the Mohr-Coulomb strength theory,the stress discrimination methods of dynamic catastrophe of surrounding rock induced by horizontal bidirectional impact loading under three kinds of supporting structures were proposed.Combined with the above numerical simulation study,the explosion impact physical and mechanical test of"R-F-C"surrounding rock supporting plate structure was further designed and carried out.Finally,combined with the"conceptual model of ball-cliff potential energy instability",the energy driving theory and energy transformation mechanism of impact-induced rockburst under three kinds of supporting structures were discussed deeply.The research results provided a scientific basis for further promoting the effective application of"R-F-C"supporting structure in the prevention and control of dynamic instability of deep tunnel/roadway surrounding rock.展开更多
Heterocyclic skeleton(Azoles)and different energetic groups containing high performing explosives are highly emerged in recent years to meet the challenging requirements of energetic materials in both military and civ...Heterocyclic skeleton(Azoles)and different energetic groups containing high performing explosives are highly emerged in recent years to meet the challenging requirements of energetic materials in both military and civilian applications with improved performance.For this purpose tetrazole(Azole)is identified as an attractive heterocyclic backbone with energetic functional groups nitro(-NO_(2)),nitrato(-ONO_(2)),nitrimino(-NNO_(2)),and nitramino(eNHeNO_(2))to replace the traditionally used high performing explosives.The tetrazole based compounds having these energetic functional groups demonstrated advanced energetic performance(detonation velocity and pressure),densities,and heat of formation(HOF)and became a potential replacement of traditional energetic compounds such as RDX.This review presents a summary of the recently reported nitro-tetrazole energetic compounds containing poly-nitro,di/mono-nitro,nitrato/nitramino/nitrimino,bridged/bis/di tetrazole and nitro functional groups,describing their preparation methods,advance energetic properties,and further applications as highperforming explosives,especially those reported in the last decade.This review aims to provide a fresh concept for designing nitro-tetrazole based high performing explosives together with major challenges and perspectives.展开更多
In order to give the energy output structure of typical explosives near-ground explosion in real ground conditions,the free-field shockwave,ground reflection shockwave and Mach wave overpressure time history of compos...In order to give the energy output structure of typical explosives near-ground explosion in real ground conditions,the free-field shockwave,ground reflection shockwave and Mach wave overpressure time history of composition B explosive,RDX explosive and aluminized explosive were measured by air pressure sensors and ground pressure sensors.The shape of the free-field shock wave,ground reflection shock wave,and Mach wave and explosion flame were captured by high-speed camera.The experimental results show that,at the same horizontal distance from the initiation point,the peak overpressure of explosive shock wave of composition B explosive,both in the air and on the ground,is less than that of RDX and aluminized explosives.At a distance of 3.0 m from the initiation point,the peak overpressure of aluminized explosives is slightly less than that of RDX explosives.Owing to the exothermic effect of aluminum powder,the pressure drop of aluminized explosives is slower than that of RDX explosives.At 5.0 m from the initiation point,the peak overpressure of aluminized explosives is larger than that of RDX explosives.At the same position from the initiation point,among the three kinds of explosives,the impulse of aluminized explosives is the maximum and the impulse of composition B explosives is the minimum.With the increase of the horizontal distance from the initiation point,the height of Mach triple-points(Mach steam)of the three explosives increases gradually.At the same horizontal distance from the initiation point,there is poorly difference in the height of Mach triple-points between aluminized explosive and RDX explosive,and the height of Mach triple-points of composition B explosive is much smaller than that of other two explosives.The maximum diameter and duration of the fireball formed by aluminized explosives are the largest,followed by composition B explosive,and the maximum diameter and duration of the fireball formed by RDX explosive are the smallest.展开更多
A deep understanding of explosive sensitivities and their factors is important for safe and reliable applications.However,quantitative prediction of the sensitivities is difficult.Here,reactive molecular dynamics simu...A deep understanding of explosive sensitivities and their factors is important for safe and reliable applications.However,quantitative prediction of the sensitivities is difficult.Here,reactive molecular dynamics simulation models for high-speed piston impacts on explosive supercells were established.Simulations were also performed to investigate shock-induced reactions of various high-energy explosives.The fraction of reacted explosive molecules in an initial supercell changed linearly with the propagation distance of the shock-wave front.The corresponding slope could be used as a reaction rate for a specific shock-loading velocity.Reaction rates that varied with the shock-loading pressure exhibited two-stage linearities with different slopes.The two inflection points corresponded to the initial and accelerated reactions,which respectively correlated to the thresholds of shock-induced ignition and detonation.Therefore,the ignition and detonation critical pressures could be determined.The sensitivity could then be a quantitative prediction of the critical pressure.The accuracies of the quantitative shock sensitivity predictions were verified by comparing the impact and shock sensitivities of common explosives and the characteristics of anisotropic shock-induced reactions.Molecular dynamics simulations quantitatively predict and rank shock sensitivities by using only crystal structures of the explosives.Overall,this method will enable the design and safe use of explosives.展开更多
This work describes thermal decomposition behaviour of plastic bonded explosives(PBXs) based on mixture of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX) and 2,4,6-triamino-1,3,5-trinitrobenzene(TATB)with Viton A as poly...This work describes thermal decomposition behaviour of plastic bonded explosives(PBXs) based on mixture of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX) and 2,4,6-triamino-1,3,5-trinitrobenzene(TATB)with Viton A as polymer binder. Thermal decomposition of PBXs was undertaken by applying simultaneous thermal analysis(STA) and differential scanning calorimetry(DSC) to investigate influence of the HMX amount on thermal behavior and its kinetics. Thermogravimetric analysis(TGA) indicated that the thermal decomposition of PBXs based on mixture of HMX and TATB was occurred in a three-steps. The first step was mainly due to decomposition of HMX. The second step was ascribed due to decomposition of TATB, while the third step was occurred due to decomposition of the polymer matrices. The thermal decomposition % was increased with increasing HMX amount. The kinetics related to thermal decomposition were investigated under non-isothermal for a single heating rate measurement. The variation in the activation energy of PBXs based on mixture of HMX and TATB was observed with varying the HMX amount. The kinetics from the results of TGA data at various heating rates under non-isothermal conditions were also calculated by Flynn—Wall—Ozawa(FWO) and Kissinger-Akahira-Sunose(KAS)methods. The activation energies calculated by employing FWO method were very close to those obtained by KAS method. The mean activation energy calculated by FWO and KAS methods was also a good agreement with the activation energy obtained from single heating rate measurement in the first step decomposition.展开更多
3-nitro-1,2,4-triazol-5-one(NTO)is the main component of insensitive munitions(IM)formulation because of its outstanding insensitive properties.In this paper,a series of NTO/HMX-based compositeexplosives were prepared...3-nitro-1,2,4-triazol-5-one(NTO)is the main component of insensitive munitions(IM)formulation because of its outstanding insensitive properties.In this paper,a series of NTO/HMX-based compositeexplosives were prepared and characterized.The study focuses on the effect of NTO on the perfommance of the formulations,especially the safety performance.The results revealed that the mechanical sensi-tivity of fomulations was associated with NTO content,as well as the thermal conductivity,specific heat capacity and Arrhenius parameters.Then,the high amount of NTO using in formulation was proved to be helpful for NTO/HMX-based formulation to exhibit good thermal safety.Besides,by accelerating rate calorimeter(ARC)and a modified cook-off equipment,the pressure and pressure rise rate were proved as the important indicator for judging the thermal safety performance in confined spaces.Finally,the numerical simulation was used as a credible method for predicting the respond temperature of cook-off experiment.展开更多
Structure of emulsifiers or functionality and molecular weight determines its rheology, emulsification and stability of emulsion explosives. Rheology of typical emulsifiers was studied by automatic rheometer. Relation...Structure of emulsifiers or functionality and molecular weight determines its rheology, emulsification and stability of emulsion explosives. Rheology of typical emulsifiers was studied by automatic rheometer. Relations between rheology and structural properties of typical emulsifiers were analyzed. Experimental results show that viscosity of emulsifiers didn＇ t change with shear rate at room temperature and appeared properties of Newtonian fluid. Viscosity of different component emulsifiers declines with temperature in different modes. The change of strain doesn＇ t affect modu- lus of emulsifiers. Loss modulus increases linearly with the increase of frequency in oscillation and storage modulus does non-linearly. The higher the temperature is, the lower change amplitude of loss modulus with frequency will be. The emulsifiers with imide and amide functionality for emulsion explosives have better shear properties at high temperature and better shapingness and stability at room temperature than other emulsifiers with ester and Sorbin Monoleate （SMO） functionality.展开更多
The evolution behavior of combustion crack reaction of highly confined solid explosives after non-shock ignition is governed by multiple dynamic processes,including intrinsic combustion of explosives,crack propagation...The evolution behavior of combustion crack reaction of highly confined solid explosives after non-shock ignition is governed by multiple dynamic processes,including intrinsic combustion of explosives,crack propagation,and rapid growth of combustion surface area.Here,the pressure increase can accelerate the combustion rate of explosives,and the crack propagation can enlarge the combustion surface area.The coupling between these two effects leads to the self-enhanced combustion of explosive charge system,which is the key mechanism for the reaction development after ignition.In this study,combustion cracknetwork(CCN) model is established to describe the evolution of combustion crack reaction of highly confined solid explosives after non-shock ignition and quantify the reaction violence.The feasibility of the model is verified by comparing the computational and experimental results.The results reveal that an increase in charge structure size causes an increase in the time of crack pressurization and extension of cracks due to the high temperature-generated gas flow and surface combustion during the initial stage of explosive reaction,but when the casing is fractured,the larger the charge structure,the more violent the late reaction and the larger the charge reaction degree.The input pressure has no obvious influence on the final reaction violence.Further,a larger venting hole area leads to better pressure relief effect,which causes slower pressure growth inside casing.Larger reserved ullage volume causes longer lowpressure induction stage,which further restrains the internal pressure growth.Furthermore,the stronger the casing constraint,the more rapid the self-enhanced combustion of the high temperaturegenerated gas,which results in more violent charge reaction and larger charge reaction degree during casing break.Overall,the proposed model can clarify the effects of intrinsic combustion rate of explosives,charge structure size,input pressure,relief area,ullage volume,and constraint strength on the reaction evolution,which can provide theoretical basis for violence evaluation and safety design for ammunition under accident stimulus.展开更多
Afterburning behind the detonation front of an aluminized explosive releases energy on the millisecond timescale,which prolong the release of detonation energy and the energy release at different stages also shows sig...Afterburning behind the detonation front of an aluminized explosive releases energy on the millisecond timescale,which prolong the release of detonation energy and the energy release at different stages also shows significant differences.However,at present,there are few effective methods for evaluating the energy release characteristics of the middle reaction stage of such explosives,which can have a duration of tens to hundreds of microseconds.The present work demonstrates an approach to assessing the midstage of an aluminized explosive detonation based on a water push test employing a high degree of confinement.In this method,the explosive is contained in a steel cylinder having one end closed that is installed at the bottom of a transparent water tank.Upon detonation,the gaseous products expand in one direction while forcing water ahead of them.The resulting underwater shock wave and the interface between the gas phase products and the water are tracked using an ultra-high-speed framing and streak camera.The shock wave velocity in water and the expansion work performed by the gaseous detonation products were calculated to assess the energy release characteristics of aluminized explosives such as CL-20 and RDX in the middle stage of the detonation reaction.During the middle stage of the detonation process of these aluminized explosives,the aluminum reaction reduced the attenuation of shock waves and increased the work performed by gas phase products.A higher aluminum content increased the energy output while the presence of oxidants slowed the energy release rate.This work demonstrates an effective means of evaluating the performance of aluminized explosives.展开更多
RDX and TNT based explosives are very useful in performing research and development works especially when complex shaping of an assembly is required due to their molding capability and the range of ratios in which the...RDX and TNT based explosives are very useful in performing research and development works especially when complex shaping of an assembly is required due to their molding capability and the range of ratios in which they can be mixed. In this paper, for these compositions, detonation shock dynamics （DSD） relations between normal detonation velocity D. and detonation wave curvature κ are determined for RDX： TNT explosives in weight ratios 40：60, 50：50 and 60：40. Experiments are performed with 50 mm diameter rate sticks of approximately 200 mm length using high speed rotating mirror camera and time measurement probes. The results show that first order DSD relation is indeed representative of these explosives. The slope of this relation increases by increasing TNT contents in these explosives. Going from 40% to 60% TNT, the data show an increase of more than 100% in negative slope of Dn-κ relation.展开更多
In order to improve the detonation characteristics of RDX,a RDX-based composite explosive with TiH_(2)powders was prepared.The effects of content and particle size of TiH_(2)powders on thermal safety,shock wave parame...In order to improve the detonation characteristics of RDX,a RDX-based composite explosive with TiH_(2)powders was prepared.The effects of content and particle size of TiH_(2)powders on thermal safety,shock wave parameters and thermal damage effects of RDX-based composite explosive were studied with the C80 microcalorimeter,air blast experiment system and colorimetric thermometry method.Experimental results showed that TiH_(2)powders could enhance the thermal stability of RDX-based composite explosive and increase its ultimate decomposition heat.The content and particle size of TiH_(2)powders also had significant effects on the thermal safety,detonation velocity,shock wave parameters,fireball temperature and duration of RDX-based composite explosives.Furthermore,the differences of TiH_(2)and Ti powders on the detonation energy output rules of RDX-based composite explosives were also compared,showing that TiH_(2)powders had better influences on improving the explosion power and thermal damage effect of RDX-based composite explosives than Ti powders,for the participation of free H_(2)released by TiH_(2)powders in the detonation process.TiH_(2)powders have important research values as a novel energetic additive in the field of military composite explosives.展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 12002044)。
文摘DNAN-based insensitive melt-cast explosives have been widely utilized in insensitive munition in recent years. When constrained DNAN-based melt-cast explosives are ignited under thermal stimulation, the base explosive exists in a molten liquid state, where high-temperature gases expand and react in the form of bubble clouds within the liquid explosive;this process is distinctly different from the dynamic crack propagation process observed in the case of solid explosives. In this study, a control model for the reaction evolution of burning-bubble clouds was established to describe the reaction process and quantify the reaction violence of DNAN-based melt-cast explosives, considering the size distribution and activation mechanism of the burning-bubble clouds. The feasibility of the model was verified through experimental results. The results revealed that under geometrically similar conditions, with identical confinement strength and aspect ratio, larger charge structures led to extended initial gas flow and surface burning processes, resulting in greater reaction equivalence and violence at the casing fracture.Under constant charge volume and size, a stronger casing confinement accelerated self-enhanced burning, increasing the internal pressure, reaction degree, and reaction violence. Under a constant casing thickness and radius, higher aspect ratios led to a greater reaction violence at the casing fracture.Moreover, under a constant charge volume and casing thickness, higher aspect ratios resulted in a higher internal pressure, increased reaction degree, and greater reaction violence at the casing fracture. Further,larger ullage volumes extended the reaction evolution time and increased the reaction violence under constant casing dimensions. Through a matching design of the opening threshold of the pressure relief holes and the relief structure area, a stable burning reaction could be maintained until completion,thereby achieving a control of the reaction violence. The proposed model could effectively reflect the effects of the intrinsic burning rate, casing confinement strength, charge size, ullage volume, and pressure relief structure on the reaction evolution process and reaction violence, providing a theoretical method for the thermal safety design and reaction violence evaluation of melt-cast explosives.
基金supported by the National Natural Science Foundation of China(NSFC,Grant Nos.11872120,12102050)Key Laboratory of Explosion Science and Technology(Grant No.QNKT22-01).
文摘The new CL-20(hexanitrohexaazaisowurtzitane)type aluminized explosives in the overdrive detonation(ODD)conditions of the core problem is how to accurately represent the state of the overdrive detonation products.To this end,this paper is based on the impedance matching method to test the ODD conditions of CL-20 type aluminium explosive particle velocity.Calculated the interfacial pressure of the shock wave in different media.Determined the characteristic parameters of the reaction zone of the detonation of CL-20 aluminized explosives.Calibrated the parameters of the JoneseWilkinseLee(JWL)+γ equation for the detonation products(DPs).Revealed the effect of different DPs equation of state(EOS)on the Hugoniot pressure of ODD.The results indicate that when the content of aluminum powder ranges from 0%to 30%,the duration of the ODD reaction zone and the width of the detonation reaction zone of the CL-20-based aluminized explosive are directly proportional to the content of aluminum powder.The width of the detonation reaction zone is increased by 1.97 times to 2.7 times compared to that of the reaction zone without the addition of aluminum powder.However,the energy release efficiency of the detonation reaction zone is inversely proportional to the content of aluminum powder.When the aluminum powder content was held constant,the incorporation of AP caused a 25%reduction in the energy release efficiency of the detonation reaction zone.Compared with existing ODD state equations,the JWL +γ equation is superior in calibrating overpressure Hugoniot data and the isentropic expansion in the C-J state.The deviation between calculated pressure results and experimental measurements is within 6%.
基金supported by the National Natural Science Foundation of China(Grant Nos.12302435 and 12221002)。
文摘Shock wave caused by a sudden release of high-energy,such as explosion and blast,usually affects a significant range of areas.The utilization of a uniform fine mesh to capture sharp shock wave and to obtain precise results is inefficient in terms of computational resource.This is particularly evident when large-scale fluid field simulations are conducted with significant differences in computational domain size.In this work,a variable-domain-size adaptive mesh enlargement(vAME)method is developed based on the proposed adaptive mesh enlargement(AME)method for modeling multi-explosives explosion problems.The vAME method reduces the division of numerous empty areas or unnecessary computational domains by adaptively suspending enlargement operation in one or two directions,rather than in all directions as in AME method.A series of numerical tests via AME and vAME with varying nonintegral enlargement ratios and different mesh numbers are simulated to verify the efficiency and order of accuracy.An estimate of speedup ratio is analyzed for further efficiency comparison.Several large-scale near-ground explosion experiments with single/multiple explosives are performed to analyze the shock wave superposition formed by the incident wave,reflected wave,and Mach wave.Additionally,the vAME method is employed to validate the accuracy,as well as to investigate the performance of the fluid field and shock wave propagation,considering explosive quantities ranging from 1 to 5 while maintaining a constant total mass.The results show a satisfactory correlation between the overpressure versus time curves for experiments and numerical simulations.The vAME method yields a competitive efficiency,increasing the computational speed to 3.0 and approximately 120,000 times in comparison to AME and the fully fine mesh method,respectively.It indicates that the vAME method reduces the computational cost with minimal impact on the results for such large-scale high-energy release problems with significant differences in computational domain size.
基金the support received from the National Natural Science Foundation of China(Grant No.12302460)the State Key Laboratory of Explosion Science and Safety Protection(Grant No.YBKT24-02)。
文摘The reactive materials filled structure(RMFS)is a structural penetrator that replaces high explosive(HE)with reactive materials,presenting a novel self-distributed initiation,multiple deflagrations behavior during penetrating multi-layered plates,and generating a multipeak overpressure behind the plates.Here analytical models of RMFS self-distributed energy release and equivalent deflagration are developed.The multipeak overpressure formation model based on the single deflagration overpressure expression was promoted.The impact tests of RMFS on multi-layered plates at 584 m/s,616 m/s,and819 m/s were performed to validate the analytical model.Further,the influence of a single overpressure peak and time intervals versus impact velocity is discussed.The analysis results indicate that the deflagration happened within 20.68 mm behind the plate,the initial impact velocity and plate thickness are the crucial factors that dominate the self-distributed multipeak overpressure effect.Three formation patterns of multipeak overpressure are proposed.
基金the financial supports from National Key R&D Program for Young Scientists of China(Grant No.2022YFC3080900)National Natural Science Foundation of China(Grant No.52374181)+1 种基金BIT Research and Innovation Promoting Project(Grant No.2024YCXZ017)supported by Science and Technology Innovation Program of Beijing institute of technology under Grant No.2022CX01025。
文摘In this study,an inverse design framework was established to find lightweight honeycomb structures(HCSs)with high impact resistance.The hybrid HCS,composed of re-entrant(RE)and elliptical annular re-entrant(EARE)honeycomb cells,was created by constructing arrangement matrices to achieve structural lightweight.The machine learning(ML)framework consisted of a neural network(NN)forward regression model for predicting impact resistance and a multi-objective optimization algorithm for generating high-performance designs.The surrogate of the local design space was initially realized by establishing the NN in the small sample dataset,and the active learning strategy was used to continuously extended the local optimal design until the model converged in the global space.The results indicated that the active learning strategy significantly improved the inference capability of the NN model in unknown design domains.By guiding the iteration direction of the optimization algorithm,lightweight designs with high impact resistance were identified.The energy absorption capacity of the optimal design reached 94.98%of the EARE honeycomb,while the initial peak stress and mass decreased by 28.85%and 19.91%,respectively.Furthermore,Shapley Additive Explanations(SHAP)for global explanation of the NN indicated a strong correlation between the arrangement mode of HCS and its impact resistance.By reducing the stiffness of the cells at the top boundary of the structure,the initial impact damage sustained by the structure can be significantly improved.Overall,this study proposed a general lightweight design method for array structures under impact loads,which is beneficial for the widespread application of honeycomb-based protective structures.
文摘This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.
基金supported by National Natural Science Foundation of China(Nos.12432018,12372346)the Innovative Research Groups of the National Natural Science Foundation of China(No.12221002)National Natural Science Foundation of China(No.12302493)。
文摘Material phase-transition represents a significant phenomenon and mechanism in the context of hypervelocity protection.This study presents a thorough analysis of the phase-transition phenomena induced by shock pressure as the shock wave propagates initially to the rear of the projectile.The shock wave that induces a phase-transition is commonly referred to as a macroscopic phase-transition wave,whereas the interface that separates the distinct phases is referred to as macroscopic phase-boundary.The contact interface between the spherical projectile and the thin plate,characterized by its curved surface,plays a significant role in the nonlinear propagation and evolution of wave systems.The pressure distribution along the central axis of a spherical projectile is derived in accordance with the linear decay law observed for axial pressure.On this basis,a quadratic function is employed to characterize the trend of changes in wave front pressure,thereby facilitating the establishment of a model for wave front pressure distribution.Using the phase-transition pressure criterion for materials,the wave front phase evolution process is derived,and the macroscopic phase-boundary is determined.Based on the geometric propagation model(GPM)and the pressure distribution of the wave front,a phase geometric propagation model(PGPM)is proposed.The phase distribution of a spherical projectile impacting a thin plate is obtained by theoretical methods.The accuracy of the PGPM is subsequently validated through a comparison of its results with those obtained from numerical simulations.
基金supported by the Zhenjiang Key R&D Plan(GY2021009)Lianyungang City Major Technology Breakthrough(CGJBGS2104)+2 种基金National Natural Science Foundation of China under Grant(12302456)National Key Laboratory Foundation of Science and Technology on Materials under Shock and Impact under Grant(6142902241601)China Postdoctoral Science Foundation under Grants(2025M774217)。
文摘Flexible materials play a crucial role in protecting against behind armour blunt trauma(BABT).However,their compliance complicates the understanding of failure mechanisms and energy absorption.This study used a combined experimental and numerical approach to investigate the response and failure modes of a flexible ultra-high-molecular-weight polyethylene(UHMWPE)foam protective sandwich structure(UFPSS)under low-velocity impact(LVI).A finite element(FE)model,accounting for nonlinear large deformation and strain-rate-dependent material behavior,was developed for a woven-UFPSS(featuring a plain-woven fabric structure)subjected to a 50 J impact.Experimental and numerical results showed strong agreement in peak force(error<5%),maximum displacement(error<6%),and buffer time(error<8%).The impact's kinetic energy was mainly converted into internal energy of the fabric and foam materials(~50%),viscous dissipation in the foam core(12%-15%),frictional work at the contact interfaces(5%-6%),and work by the pneumatic fixture clamping force(~38%).This study provides the first investigation of the LVI performance of sandwich structures with all soft material layers,offering significant insights for the application of compliant materials in protective fields.
基金supported by the National Natural Science Foundation of China(Grant Nos.12172045,U2241240,and 12221002)the National Program on Key Basic Research Project,China(Grant No.2019-JCJQ-ZD-308-00).
文摘The curing behavior of composites significantly influences their performance,making it crucial to understand the curing process.This study experimentally measured specific heat capacity,thermal conductivity,glass transition temperature,coefficient of thermal expansion,and cure shrinkage of materials.A simulation model of its curing deformation was established and validated against strain data obtained from fiber Bragg grating experiments.The effects of thickness,heating rate,and cooling rate on the curing temperature field and residual stress field during the molding of thick-section composite plates were analyzed.
基金Project(2023AH051167)supported by the Natural Science Research Project of Anhui Educational Committee,ChinaProject(AHBP2024B-04)supported by the Foundation of Anhui Engineering Research Center of New Explosive Materials and Blasting Technology,China+1 种基金Project(GXZDSYS2023103)supported by the Open Fund for Anhui Key Laboratory of Mining Construction Engineering,ChinaProjects(52274071,52404155)supported by the National Natural Science Foundation of China。
文摘Aiming at the problem of dynamic instability of hard-brittle jointed rock surrounding in deep tunnel/roadway engineering,combining with the support concepts of"coupling rigidity with flexibility"and"overcoming rigidity by flexibility",the prevention and control method with"rigid-flexible coupling(R-F-C)"was put forward.Through numerical simulation calculation,the impact damage process,acoustic emission(AE)evolution characteristics,and element stress/displacement evolution characteristics of unsupported surrounding rock structure model,rigid supporting surrounding rock structure model,and"R-F-C"supporting surrounding rock structure model under horizontal bidirectional impact loading were compared and analyzed.Based on the theory of stress wave propagation,the dynamic instability catastrophe mechanism of three kinds of supporting structure models induced by horizontal bidirectional impact loading was revealed.Based on the Mohr-Coulomb strength theory,the stress discrimination methods of dynamic catastrophe of surrounding rock induced by horizontal bidirectional impact loading under three kinds of supporting structures were proposed.Combined with the above numerical simulation study,the explosion impact physical and mechanical test of"R-F-C"surrounding rock supporting plate structure was further designed and carried out.Finally,combined with the"conceptual model of ball-cliff potential energy instability",the energy driving theory and energy transformation mechanism of impact-induced rockburst under three kinds of supporting structures were discussed deeply.The research results provided a scientific basis for further promoting the effective application of"R-F-C"supporting structure in the prevention and control of dynamic instability of deep tunnel/roadway surrounding rock.
基金We are thankful to the NSAF(U1830134),NSFC(21905023 and 21911530096)for their generous financial support.
文摘Heterocyclic skeleton(Azoles)and different energetic groups containing high performing explosives are highly emerged in recent years to meet the challenging requirements of energetic materials in both military and civilian applications with improved performance.For this purpose tetrazole(Azole)is identified as an attractive heterocyclic backbone with energetic functional groups nitro(-NO_(2)),nitrato(-ONO_(2)),nitrimino(-NNO_(2)),and nitramino(eNHeNO_(2))to replace the traditionally used high performing explosives.The tetrazole based compounds having these energetic functional groups demonstrated advanced energetic performance(detonation velocity and pressure),densities,and heat of formation(HOF)and became a potential replacement of traditional energetic compounds such as RDX.This review presents a summary of the recently reported nitro-tetrazole energetic compounds containing poly-nitro,di/mono-nitro,nitrato/nitramino/nitrimino,bridged/bis/di tetrazole and nitro functional groups,describing their preparation methods,advance energetic properties,and further applications as highperforming explosives,especially those reported in the last decade.This review aims to provide a fresh concept for designing nitro-tetrazole based high performing explosives together with major challenges and perspectives.
基金supported by the National Natural Science Foundation of China(No.11732003)Beijing Natural Science Foundation(No.8182050)+1 种基金Science Challenge Project(No.TZ2016001)National Key Research and Development Program of China(No.2017YFC0804700)。
文摘In order to give the energy output structure of typical explosives near-ground explosion in real ground conditions,the free-field shockwave,ground reflection shockwave and Mach wave overpressure time history of composition B explosive,RDX explosive and aluminized explosive were measured by air pressure sensors and ground pressure sensors.The shape of the free-field shock wave,ground reflection shock wave,and Mach wave and explosion flame were captured by high-speed camera.The experimental results show that,at the same horizontal distance from the initiation point,the peak overpressure of explosive shock wave of composition B explosive,both in the air and on the ground,is less than that of RDX and aluminized explosives.At a distance of 3.0 m from the initiation point,the peak overpressure of aluminized explosives is slightly less than that of RDX explosives.Owing to the exothermic effect of aluminum powder,the pressure drop of aluminized explosives is slower than that of RDX explosives.At 5.0 m from the initiation point,the peak overpressure of aluminized explosives is larger than that of RDX explosives.At the same position from the initiation point,among the three kinds of explosives,the impulse of aluminized explosives is the maximum and the impulse of composition B explosives is the minimum.With the increase of the horizontal distance from the initiation point,the height of Mach triple-points(Mach steam)of the three explosives increases gradually.At the same horizontal distance from the initiation point,there is poorly difference in the height of Mach triple-points between aluminized explosive and RDX explosive,and the height of Mach triple-points of composition B explosive is much smaller than that of other two explosives.The maximum diameter and duration of the fireball formed by aluminized explosives are the largest,followed by composition B explosive,and the maximum diameter and duration of the fireball formed by RDX explosive are the smallest.
基金supported by the National Natural Science Foundation of China(Grant No.11832006).
文摘A deep understanding of explosive sensitivities and their factors is important for safe and reliable applications.However,quantitative prediction of the sensitivities is difficult.Here,reactive molecular dynamics simulation models for high-speed piston impacts on explosive supercells were established.Simulations were also performed to investigate shock-induced reactions of various high-energy explosives.The fraction of reacted explosive molecules in an initial supercell changed linearly with the propagation distance of the shock-wave front.The corresponding slope could be used as a reaction rate for a specific shock-loading velocity.Reaction rates that varied with the shock-loading pressure exhibited two-stage linearities with different slopes.The two inflection points corresponded to the initial and accelerated reactions,which respectively correlated to the thresholds of shock-induced ignition and detonation.Therefore,the ignition and detonation critical pressures could be determined.The sensitivity could then be a quantitative prediction of the critical pressure.The accuracies of the quantitative shock sensitivity predictions were verified by comparing the impact and shock sensitivities of common explosives and the characteristics of anisotropic shock-induced reactions.Molecular dynamics simulations quantitatively predict and rank shock sensitivities by using only crystal structures of the explosives.Overall,this method will enable the design and safe use of explosives.
基金DRDO(TBR-1251)for funding and awarding the Project
文摘This work describes thermal decomposition behaviour of plastic bonded explosives(PBXs) based on mixture of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX) and 2,4,6-triamino-1,3,5-trinitrobenzene(TATB)with Viton A as polymer binder. Thermal decomposition of PBXs was undertaken by applying simultaneous thermal analysis(STA) and differential scanning calorimetry(DSC) to investigate influence of the HMX amount on thermal behavior and its kinetics. Thermogravimetric analysis(TGA) indicated that the thermal decomposition of PBXs based on mixture of HMX and TATB was occurred in a three-steps. The first step was mainly due to decomposition of HMX. The second step was ascribed due to decomposition of TATB, while the third step was occurred due to decomposition of the polymer matrices. The thermal decomposition % was increased with increasing HMX amount. The kinetics related to thermal decomposition were investigated under non-isothermal for a single heating rate measurement. The variation in the activation energy of PBXs based on mixture of HMX and TATB was observed with varying the HMX amount. The kinetics from the results of TGA data at various heating rates under non-isothermal conditions were also calculated by Flynn—Wall—Ozawa(FWO) and Kissinger-Akahira-Sunose(KAS)methods. The activation energies calculated by employing FWO method were very close to those obtained by KAS method. The mean activation energy calculated by FWO and KAS methods was also a good agreement with the activation energy obtained from single heating rate measurement in the first step decomposition.
基金The authors are grateful to the National Defense Foundation of China(3090021322001,3090020221912,3090021211903.)for financial support of this work.
文摘3-nitro-1,2,4-triazol-5-one(NTO)is the main component of insensitive munitions(IM)formulation because of its outstanding insensitive properties.In this paper,a series of NTO/HMX-based compositeexplosives were prepared and characterized.The study focuses on the effect of NTO on the perfommance of the formulations,especially the safety performance.The results revealed that the mechanical sensi-tivity of fomulations was associated with NTO content,as well as the thermal conductivity,specific heat capacity and Arrhenius parameters.Then,the high amount of NTO using in formulation was proved to be helpful for NTO/HMX-based formulation to exhibit good thermal safety.Besides,by accelerating rate calorimeter(ARC)and a modified cook-off equipment,the pressure and pressure rise rate were proved as the important indicator for judging the thermal safety performance in confined spaces.Finally,the numerical simulation was used as a credible method for predicting the respond temperature of cook-off experiment.
基金Supported by Independent Research Projects of State Key Laboratory of Explosion Science and Technology(ZDKT08-05)
文摘Structure of emulsifiers or functionality and molecular weight determines its rheology, emulsification and stability of emulsion explosives. Rheology of typical emulsifiers was studied by automatic rheometer. Relations between rheology and structural properties of typical emulsifiers were analyzed. Experimental results show that viscosity of emulsifiers didn＇ t change with shear rate at room temperature and appeared properties of Newtonian fluid. Viscosity of different component emulsifiers declines with temperature in different modes. The change of strain doesn＇ t affect modu- lus of emulsifiers. Loss modulus increases linearly with the increase of frequency in oscillation and storage modulus does non-linearly. The higher the temperature is, the lower change amplitude of loss modulus with frequency will be. The emulsifiers with imide and amide functionality for emulsion explosives have better shear properties at high temperature and better shapingness and stability at room temperature than other emulsifiers with ester and Sorbin Monoleate （SMO） functionality.
基金supported by the National Natural Science Foundation of China (Grant No.12002044)the National Key Laboratory of Shock Wave and Detonation Physics (Grant No.6142A03192007)。
文摘The evolution behavior of combustion crack reaction of highly confined solid explosives after non-shock ignition is governed by multiple dynamic processes,including intrinsic combustion of explosives,crack propagation,and rapid growth of combustion surface area.Here,the pressure increase can accelerate the combustion rate of explosives,and the crack propagation can enlarge the combustion surface area.The coupling between these two effects leads to the self-enhanced combustion of explosive charge system,which is the key mechanism for the reaction development after ignition.In this study,combustion cracknetwork(CCN) model is established to describe the evolution of combustion crack reaction of highly confined solid explosives after non-shock ignition and quantify the reaction violence.The feasibility of the model is verified by comparing the computational and experimental results.The results reveal that an increase in charge structure size causes an increase in the time of crack pressurization and extension of cracks due to the high temperature-generated gas flow and surface combustion during the initial stage of explosive reaction,but when the casing is fractured,the larger the charge structure,the more violent the late reaction and the larger the charge reaction degree.The input pressure has no obvious influence on the final reaction violence.Further,a larger venting hole area leads to better pressure relief effect,which causes slower pressure growth inside casing.Larger reserved ullage volume causes longer lowpressure induction stage,which further restrains the internal pressure growth.Furthermore,the stronger the casing constraint,the more rapid the self-enhanced combustion of the high temperaturegenerated gas,which results in more violent charge reaction and larger charge reaction degree during casing break.Overall,the proposed model can clarify the effects of intrinsic combustion rate of explosives,charge structure size,input pressure,relief area,ullage volume,and constraint strength on the reaction evolution,which can provide theoretical basis for violence evaluation and safety design for ammunition under accident stimulus.
基金supported by the National Natural Science Foundation of China(Grant No.11832006)。
文摘Afterburning behind the detonation front of an aluminized explosive releases energy on the millisecond timescale,which prolong the release of detonation energy and the energy release at different stages also shows significant differences.However,at present,there are few effective methods for evaluating the energy release characteristics of the middle reaction stage of such explosives,which can have a duration of tens to hundreds of microseconds.The present work demonstrates an approach to assessing the midstage of an aluminized explosive detonation based on a water push test employing a high degree of confinement.In this method,the explosive is contained in a steel cylinder having one end closed that is installed at the bottom of a transparent water tank.Upon detonation,the gaseous products expand in one direction while forcing water ahead of them.The resulting underwater shock wave and the interface between the gas phase products and the water are tracked using an ultra-high-speed framing and streak camera.The shock wave velocity in water and the expansion work performed by the gaseous detonation products were calculated to assess the energy release characteristics of aluminized explosives such as CL-20 and RDX in the middle stage of the detonation reaction.During the middle stage of the detonation process of these aluminized explosives,the aluminum reaction reduced the attenuation of shock waves and increased the work performed by gas phase products.A higher aluminum content increased the energy output while the presence of oxidants slowed the energy release rate.This work demonstrates an effective means of evaluating the performance of aluminized explosives.
文摘RDX and TNT based explosives are very useful in performing research and development works especially when complex shaping of an assembly is required due to their molding capability and the range of ratios in which they can be mixed. In this paper, for these compositions, detonation shock dynamics （DSD） relations between normal detonation velocity D. and detonation wave curvature κ are determined for RDX： TNT explosives in weight ratios 40：60, 50：50 and 60：40. Experiments are performed with 50 mm diameter rate sticks of approximately 200 mm length using high speed rotating mirror camera and time measurement probes. The results show that first order DSD relation is indeed representative of these explosives. The slope of this relation increases by increasing TNT contents in these explosives. Going from 40% to 60% TNT, the data show an increase of more than 100% in negative slope of Dn-κ relation.
基金the National Natural Science Foundation of China(Grant Nos.11972046,12272001)the Outstanding Youth Project of Natural Science Foundation of Anhui Province(Grant No.2108085Y02)+1 种基金Anhui University of Science and Technology Postgraduate Innovation Fund(Grant No.2022CX2108)the authors would like to thank these foundations for the financial supports.
文摘In order to improve the detonation characteristics of RDX,a RDX-based composite explosive with TiH_(2)powders was prepared.The effects of content and particle size of TiH_(2)powders on thermal safety,shock wave parameters and thermal damage effects of RDX-based composite explosive were studied with the C80 microcalorimeter,air blast experiment system and colorimetric thermometry method.Experimental results showed that TiH_(2)powders could enhance the thermal stability of RDX-based composite explosive and increase its ultimate decomposition heat.The content and particle size of TiH_(2)powders also had significant effects on the thermal safety,detonation velocity,shock wave parameters,fireball temperature and duration of RDX-based composite explosives.Furthermore,the differences of TiH_(2)and Ti powders on the detonation energy output rules of RDX-based composite explosives were also compared,showing that TiH_(2)powders had better influences on improving the explosion power and thermal damage effect of RDX-based composite explosives than Ti powders,for the participation of free H_(2)released by TiH_(2)powders in the detonation process.TiH_(2)powders have important research values as a novel energetic additive in the field of military composite explosives.
